Upload
others
View
2
Download
0
Embed Size (px)
Citation preview
ADI
Features• The ultimate cylindrical PC dripper for agriculture• Everlasting reliability• Unique and accurate pressure-compensating labyrinth
mechanism• Wide water passages with turbulent flow pattern• Large Inlet filter area – Up to 10 times larger than any
other dripper• Dual inlet filter for various water sources • Excellentforeffluentreuse• Highly clog-resistant• Wide compensation range – up to 4.3 bars
RootGuard® configuration is available for extra protection against root intrusion in SDI systems.
Technical DataDripper flow rates: 1.6 / 2.2 / 3.5 l/h
Dripline diameters: 16 / 18 / 20 mm
Dripline wall thickness: 0.9-1.25 mm
Applications» Row crops» Orchards » Landscaping» Vegetables» Gardening
Cylindrical PC Dripper
Unique PC MechanismUnique and accurate pressure-compensating labyrinth mechanism
Landscaping
Row crops Orchards
Applications
Self-FlushingPC Labyrinth
Chemical-ResistantSilicon Diaphragm
Dripper Cover
The Ultimate Cylindrical PC Dripper for Agriculture
Dual Large Clog-Resistant Inlet Filterfor Low Quality Water
Primary Labyrinth
Primary Labyrinth with Wide Water Passages
ADI Dripline - Technical Data
Packaging Data
Model Coil Length (m)*
Number of Coils per Container
20’ 40’ 40’ HC
ADI 16 400 150 300 326
ADI 20 300 133 266 300
ModelInside
Diameter (mm)
Wall Thickness
(mm)
Min. Working Pressure
(bar)
Max. Working Pressure
(bar) Kd
ADI 16 13.80.9
0.8 4.3 0.95-1.121.15
ADI 20 17.41.0
0.8 4.3 0.6-0.851.25
www.metzer-group.com Kibbutz Metzer, M.P Hefer 3882000, Israel
+972 4 6387001 +972 4 6385385 [email protected] Adi E
n 10
16Metzerplas reserves the right to redesign/modify its products and change the information in this document at any time without prior notice and without incurring any responsibility or liability for errors published here.
ADI 16 Max. Lateral Length (ID 13.8 mm, WT 0.9 mm, Inlet Pressure 3.5 bar)
Nominal Flow Rate (l/h)
Spacing between Drippers (m)
0.20 0.30 0.40 0.50 0.60 0.75 1.00
1.6 100 143 183 221 256 306 382
2.2 84 120 154 185 213 254 316
3.5 59 85 110 132 153 183 230
ADI 20 Max. Lateral Length (ID 17.4 mm, WT 1.0 mm, Inlet Pressure 2.5 bar)
Nominal Flow Rate (l/h)
Spacing between Drippers (m)
0.20 0.30 0.40 0.50 0.60 0.75 1.00
1.6 149 214 274 329 382 456 569
2.1 136 193 245 293 338 401 496
» On flat ground» Representative tables only. For further information, please refer to the Irrimetzer software.
* Available also in coil length shorter than 400m
ASSIF
Features• Especially designed for SDI applications• Anti-siphon system - prevents suction of sand or soil into the dripper• Wide range of working pressures for various topographies• Unique and accurate regulating labyrinth mechanism• Wide water passages along the labyrinth• Suitablefordifferentwatersources• Long-lasting silicon diaphragm• Durable under harsh field conditions and chemical applications
RootGuard® configuration is available for extra protection against root intrusion in SDI systems.
Unique Anti-Siphon System Anti-siphon system - prevents suction of sand or soil into the dripper
Anti-Siphon PC Dripper
Technical DataDripper flow rates: 0.8 / 1.2 / 1.6 / 2.1 / 3.4 l/h
Dripline diameters: 16 / 17 / 20 / 22 / 25 mm
Dripline wall thickness: 0.4 - 1.2 mm
Applications» Row crops» Orchards» Turf and landscaping » Vegetables» Sugarcane» Alfalfa» Industrial crops
Large Inlet Filter with Anti-Siphon Barrier
Chemical-Resistant Silicon Diaphragm
Self-Flushing PC Labyrinth
Primary Labyrinth
Primary Labyrinth with Wide Water Passages
Landscaping
Row crops Orchards
Applications
ASSIF Dripline - Technical Data
ModelInside
Diameter(mm)
Wall Thickness
(mm)
Min. Working Pressure
(bar)
Max. Working Pressure
(bar)Kd
ASSIF 16
15.8 0.4
0.8
2.00.2
15.2 0.6 2.5
13.8 0.9-1 3.5 0.27
ASSIF 1715.8 0.6
0.82.5
0.215.0 0.9-1 3.5
ASSIF 20 17.4 0.9-1.2 0.8 3.5-4.3 0.1
ASSIF 22 21 0.4-1.0 0.8 3.5 0.08
ASSIF 25 24.7 0.4-1.0 0.8 3.5 0.05
Assi
f En
1016
Packaging Data
www.metzer-group.com Kibbutz Metzer, M.P Hefer 3882000, Israel
+972 4 6387001 +972 4 6385385 [email protected]
ModelWall
Thickness (mm)
Coil/Drum Length (m) Number of Coils/Drums*
per Container
20’ 40’ 40’ HC
ASSIF 16
0.4 1000 Narrow 360 720 880
0.6 <20cm spacing – 600 WideOther spacing – - 800 Wide 240 480 580
0.9 500 Wide
1.15 400 Coil 170 340 375
ASSIF 17
0.6 20cm spacing – 600 WideOther spacing – 800 Wide
240 480 580
240 480 5800.9 500 Wide
1.15 400 Coil 170 340 375
ASSIF 200.9 400 Coil 125 150 180
1.2 300 Coil 140 280 300
ASSIF 22 1.00 350 Wide 240 480 580
ASSIF 25 1.00 300 Wide 240 480 580
* Number of drums per pallet: Wide - 24, Narrow - 36
ASSIF 20 Max. Lateral Length (ID 17.4 mm, WT 1.0 mm, Inlet Pressure 2.5 bar)
Nominal Flow Rate (l/h) Spacing between Drippers (m)
0.20 0.30 0.40 0.50 0.60 0.75 1.00
0.8 278 364 439 508 571 659 793
1.2 231 302 365 422 475 549 660
1.6 192 251 304 351 395 456 549
2.1 161 211 255 295 332 384 462
3.4 118 155 187 217 244 282 340
ASSIF 16 Max. Lateral Length (ID 15.2 mm, WT 0.6 mm, Inlet Pressure 2.5 (bar)
Nominal Flow Rate (l/h) Spacing between Drippers (m)
0.20 0.30 0.40 0.50 0.60 0.75 1.00
0.8 206 275 336 391 442 512 619
1.2 171 228 279 325 367 426 515
1.6 142 189 232 270 305 354 429
2.1 119 159 194 227 256 297 360
3.4 87 116 142 166 188 219 265
ASSIF 17 Max. Lateral Length (ID 15.8 mm, WT 0.6 mm, Inlet Pressure 2.5 bar)
Nominal Flow Rate (l/h) Spacing between Drippers (m)
0.20 0.30 0.40 0.50 0.60 0.75 1.00
0.8 219 293 358 417 471 546 661
1.2 181 243 297 346 391 455 550
1.6 150 201 247 288 325 378 4582.1 126 169 207 242 273 318 385
3.4 92 124 152 177 201 233 283
ASSIF 25 Max. Lateral Length (I.D 24.7 mm, W.T 1.0 mm, Inlet Pressure 2.5 bar)
Nominal Flow Rate (l/h) Spacing between Drippers (m)
0.20 0.30 0.40 0.50 0.60 0.75 1.00
0.8 524 678 815 940 1055 1215 1460
1.2 435 564 678 782 878 1011 1215
1.6 361 469 564 650 730 842 1011
2.1 303 394 474 456 614 708 850
3.4 222 289 348 401 451 520 625
Metzerplas reserves the right to redesign/modify its products and change the information in this document at any time without prior notice and without incurring any responsibility or liability for errors published here.
» On flat ground» Representative tables only. For further information, please refer to the Irrimetzer software.
GALI
Features• Highly reliable dripper• Unique and accurate regulating labyrinth mechanism• Wide water passages along the labyrinth• Self-flushing operation at the beginning and at the end of each irrigation cycle• Compact multi-optional button dripper• Accommodates 1, 2, and 4 outlet adapters
Online PC/PCND Dripper
Technical DataDripper flow rates:2.05 l/h 4.0 l/h (available soon)
Suitable for 12-32 mm tubes
Non-drain option:Shut down pressure: 2 m
Applications» Greenhouses and nurseries» Orchards» Landscaping» Gardening» Vegetables» Hydroponics / Soilless culture
Greenhouses
Landscaping
Orchards
Applications
Primary Cylindrical Labyrinth with Wide Water Passages
Chemical-Resistant Silicon Diaphragm
Non-Drain Option Non-drain system: The dripline remains full of water during irrigation intervals, ensuring immediate and uniform irrigation along the dripline.
PC Labyrinth
Self-FlushingPC Labyrinth
GALI 2.05 l/h - Max. Lateral Length (m)
www.metzer-group.com Kibbutz Metzer, M.P Hefer 3882000, Israel
+972 4 6387001 +972 4 6385385 [email protected]
PE Pipe 16 mm, ID 13.2 mm, (Kd 0.45)Inlet
Pressure (bar)
Spacing between Drippers (m)
0.20 0.30 0.40 0.50 1.00 2.00 3.00
1.0 40 55 68 80 129 206 267
1.5 62 85 106 125 203 322 420
2.0 75 103 128 151 246 392 510
2.5 84 116 145 171 278 444 579
3.0 92 127 158 187 305 486 636
PE Pipe 25mm, ID 21.2 mm, (Kd 0.12)Inlet
Pressure (bar)
Spacing between Drippers (m)
0.20 0.30 0.40 0.50 1.00 2.00 3.00
1.0 100 133 162 189 299 470 609
1.5 155 208 254 296 470 738 960
2.0 187 251 308 359 571 898 1167
2.5 211 284 348 407 648 1018 1323
3.0 231 311 382 446 711 1118 1452
PE Pipe 20 mm, ID 17 mm, (Kd 0.20)Inlet
Pressure (bar)
Spacing between Drippers (m)
0.20 0.30 0.40 0.50 1.00 2.00 3.00
1.0 68 91 111 129 204 320 417
1.5 105 141 173 202 321 504 654
2.0 127 171 210 245 390 614 798
2.5 144 194 237 277 442 696 903
3.0 157 212 260 304 485 764 993
PE Pipe 32mm, ID 27.2 mm, (Kd 0.04)Inlet
Pressure (bar)
Spacing between Drippers (m)
0.20 0.30 0.40 0.50 1.00 2.00 3.00
1.0 171 221 264 304 470 730 942
1.5 268 346 415 478 741 1150 1488
2.0 325 420 504 581 900 1398 1809
2.5 368 476 571 658 1022 1586 2052
Metzerplas reserves the right to redesign/modify its products and change the information in this document at any time without prior notice and without incurring any responsibility or liability for errors published here.
1-Outlet Adapter 2-Outlet Adapter 4-Outlet Adapter
» Representative tables only. For further information, please refer to the Irrimetzer software.
Gali
En 1
016
IDIT
Features• High performance with a wide variety of crops• Extremely durable under harsh field conditions• Turbulent water flow pattern• Highly clog-resistant inlet filter - ensures clean and continuous flow• Suitablefordifferentwatersources• Excellentforeffluentreuse
RootGuard® configuration is available for extra protection against root intrusion in SDI systems.
Heavy-Duty Integral Dripper Extremely durable dripper with dual inlet filter for best clog-resistance
Cylindrical Dripper
Technical DataDripper flow rates: 1.4 / 2.3 / 3.1 / 4.3 / 10 l/h
Dripline diameter:16 mm
Dripline wall thickness: 0.9 and 1.15 mm
Applications» Row crops» Orchards » Landscaping» Vineyards» Vegetables» Gardening
Long Turbulent Labyrinth with Wide Water Passages
Clog-Resistant CylindricalInlet Filter
Landscaping
Row crops Orchards
Applications
IDIT 16 Max. Lateral Length (ID 13.8 mm, WT 0.9 mm, Inlet Pressure 2.5 bar)
Nominal Flow Rate (l/h) Spacing between Drippers (m)
0.20 0.30 0.40 0.50 0.60 0.75 1.00
1.6 62 84 102 119 135 156 190
2.3 44 59 72 84 96 111 135
3.1 35 48 59 70 79 92 112
4.3 29 39 48 56 64 75 91
10.0 16 22 28 33 37 43 53
IDIT Dripline - Technical Data
ModelInside
Diameter (mm)
Wall Thickness
(mm)
Min. Working Pressure
(bar)*
Max. Working Pressure
(bar)Exponent Kd
IDIT 16 13.80.9
0.83.5
0.51-0.53 0.25-0.31.15 4.3
* For efficient dripline flushing, the recommended minimum working pressure is 0.8 bar.
Packaging DataModel Coil Length (m)* Number of Coils
per Container
20’ 40’ 40’ HCIDIT 16 400 150 300 326
Idit
En 1
016
www.metzer-group.com Kibbutz Metzer, M.P Hefer 3882000, Israel
+972 4 6387001 +972 4 6385385 [email protected]
» On flat ground» At 10% flow variation» Representative table only. For further information, please refer to the Irrimetzer software.
Metzerplas reserves the right to redesign/modify its products and change the information in this document at any time without prior notice and without incurring any responsibility or liability for errors published here.
INBAR
Features• Multi-purpose flat dripper for high-end crops and advanced agriculture• Wide range of working pressures for various topographies• Shuts down automatically at low pressure (< 0.14 bar) • Non drain: The dripline remains full of water during irrigation intervals, ensuring immediate and uniform irrigation along the dripline.• Anti-siphon mechanism prevents suction of sand and soil into the dripper• Accurate pressure-regulating labyrinth mechanism• Wide water passage along the labyrinth• Suitablefordifferentwatersources• Long-lasting silicon diaphragm• Durable under harsh field conditions and chemical applications
Technical DataDripper flow rates: 0.8 / 1.2 / 1.6 / 2.1 / 3.4 l/h
Shut down pressure: 1.4 m
Dripline diameters: 16 / 17 / 20 / 22 / 25 mm
Dripline wall thickness: 0.4 - 1.2 mm
Applications» Greenhouses» Row crops» Pulse irrigation» Vegetables
Unique Non-Drain SystemNon-Drain system: The dripline remains full of water during irrigation intervals, ensuring immediate and uniform irrigation along the dripline.
Greenhouses Row crops
Applications
Inlet Filter with Non-Drain Barrier
Chemical-Resistant Silicon Diaphragm
Self-Flushing PC Labyrinth
Primary Labyrinth
Primary Labyrinth with Wide Water Passage
Non-Drain PC Dripper
INBAR 20 Max. Lateral Length (ID 17.4 mm, WT 1.0 mm, Inlet Pressure 2.5 bar)
Nominal Flow Rate (l/h) Spacing between Drippers (m)
0.20 0.30 0.40 0.50 0.60 0.75 1.00
0.8 278 364 439 508 571 659 793
1.2 231 302 365 422 475 549 660
1.6 192 251 304 351 395 456 549
2.1 161 211 255 295 332 384 462
3.4 118 155 187 217 244 282 340
INBAR 25 Max. Lateral Length (ID 24.7 mm, WT 1.0 mm, Inlet Pressure 2.5 bar)
Nominal Flow Rate (l/h) Spacing between Drippers (m)
0.20 0.30 0.40 0.50 0.60 0.75 1.00
0.8 524 678 815 940 1055 1215 1460
1.2 435 564 678 782 878 1011 1215
1.6 361 469 564 650 730 842 1011
2.1 303 394 474 456 614 708 850
3.4 222 289 348 401 451 520 625
INBAR 16 Max. Lateral Length (ID 15.2 mm, WT 0.6 mm, Inlet Pressure 2.5 bar)
Nominal Flow Rate (l/h) Spacing between Drippers (m)
0.20 0.30 0.40 0.50 0.60 0.75 1.00
0.8 206 275 336 391 442 512 619
1.2 171 228 279 325 367 426 515
1.6 142 189 232 270 305 354 429
2.1 119 159 194 227 256 297 360
3.4 87 116 142 166 188 219 265
INBAR 17 Max. Lateral Length (ID 15.8 mm, WT 0.6 mm, Inlet Pressure 2.5 bar)
Nominal Flow Rate (l/h) Spacing between Drippers (m)
0.20 0.30 0.40 0.50 0.60 0.75 1.00
0.8 219 293 358 417 471 546 661
1.2 181 243 297 346 391 455 550
1.6 150 201 247 288 325 378 458
2.1 126 169 207 242 273 318 385
3.4 92 124 152 177 201 233 283
Inba
r En
1016
www.metzer-group.com Kibbutz Metzer, M.P Hefer 3882000, Israel
+972 4 6387001 +972 4 6385385 [email protected]
INBAR Dripline - Technical Data
ModelInside
Diameter (mm)
Wall Thickness
(mm)
Min. Working Pressure
(bar)
Max. Working Pressure
(bar)Kd
INBAR 16
15.8 0.4
0.8
2.00.2
15.2 0.6 2.5
13.8 0.9-1 3.5 0.27
INBAR 1715.8 0.6
0.82.5
0.215.0 0.9-1 3.5
INBAR 20 17.4 0.9-1.2 0.8 3.5-4.3 0.1
INBAR 22 21 0.4-1.0 0.8 3.5 0.08
INBAR 25 24.7 0.4-1.0 0.8 3.5 0.05
Packaging Data
ModelWall
Thickness (mm)
Coil/Drum Length (m) Number of Coils/Drums*
per Container
20’ 40’ 40’ HC
INBAR 16
0.4 1000 Narrow 360 720 880
0.6 <20cm spacing – 600 WideOther spacing – - 800 Wide 240 480 580
0.9 500 Wide
1.00 400 Coil 170 340 375
INBAR 17
0.6 20cm spacing – 600 WideOther spacing – 800 Wide
240 480 580
240 480 5800.9 500 Wide
1.15 400 Coil 170 340 375
INBAR 200.9 400 Coil 125 150 180
1.2 300 Coil 140 280 300
INBAR 22 1.00 350 Wide 240 480 580
INBAR 25 1.00 300 Wide 240 480 580
Metzerplas reserves the right to redesign/modify its products and change the information in this document at any time without prior notice and without incurring any responsibility or liability for errors published here.
» On flat ground» Representative tables only. For further information, please refer to the Irrimetzer software.
* Number of drums per pallet: Wide – 24, Narrow - 36
INBAR 20 Max. Lateral Length (ID 17.4 mm, WT 1.0 mm, Inlet Pressure 2.5 bar)
Nominal Flow Rate (l/h) Spacing between Drippers (m)
0.20 0.30 0.40 0.50 0.60 0.75 1.00
0.8 278 364 439 508 571 659 793
1.2 231 302 365 422 475 549 660
1.6 192 251 304 351 395 456 549
2.1 161 211 255 295 332 384 462
3.4 118 155 187 217 244 282 340
INBAR 25 Max. Lateral Length (ID 24.7 mm, WT 1.0 mm, Inlet Pressure 2.5 bar)
Nominal Flow Rate (l/h) Spacing between Drippers (m)
0.20 0.30 0.40 0.50 0.60 0.75 1.00
0.8 524 678 815 940 1055 1215 1460
1.2 435 564 678 782 878 1011 1215
1.6 361 469 564 650 730 842 1011
2.1 303 394 474 456 614 708 850
3.4 222 289 348 401 451 520 625
INBAR 16 Max. Lateral Length (ID 15.2 mm, WT 0.6 mm, Inlet Pressure 2.5 bar)
Nominal Flow Rate (l/h) Spacing between Drippers (m)
0.20 0.30 0.40 0.50 0.60 0.75 1.00
0.8 206 275 336 391 442 512 619
1.2 171 228 279 325 367 426 515
1.6 142 189 232 270 305 354 429
2.1 119 159 194 227 256 297 360
3.4 87 116 142 166 188 219 265
INBAR 17 Max. Lateral Length (ID 15.8 mm, WT 0.6 mm, Inlet Pressure 2.5 bar)
Nominal Flow Rate (l/h) Spacing between Drippers (m)
0.20 0.30 0.40 0.50 0.60 0.75 1.00
0.8 219 293 358 417 471 546 661
1.2 181 243 297 346 391 455 550
1.6 150 201 247 288 325 378 458
2.1 126 169 207 242 273 318 385
3.4 92 124 152 177 201 233 283
Inba
r En
1016
www.metzer-group.com Kibbutz Metzer, M.P Hefer 3882000, Israel
+972 4 6387001 +972 4 6385385 [email protected]
INBAR Dripline - Technical Data
ModelInside
Diameter (mm)
Wall Thickness
(mm)
Min. Working Pressure
(bar)
Max. Working Pressure
(bar)Kd
INBAR 16
15.8 0.4
0.8
2.00.2
15.2 0.6 2.5
13.8 0.9-1 3.5 0.27
INBAR 1715.8 0.6
0.82.5
0.215.0 0.9-1 3.5
INBAR 20 17.4 0.9-1.2 0.8 3.5-4.3 0.1
INBAR 22 21 0.4-1.0 0.8 3.5 0.08
INBAR 25 24.7 0.4-1.0 0.8 3.5 0.05
Packaging Data
ModelWall
Thickness (mm)
Coil/Drum Length (m) Number of Coils/Drums*
per Container
20’ 40’ 40’ HC
INBAR 16
0.4 1000 Narrow 360 720 880
0.6 <20cm spacing – 600 WideOther spacing – - 800 Wide 240 480 580
0.9 500 Wide
1.00 400 Coil 170 340 375
INBAR 17
0.6 20cm spacing – 600 WideOther spacing – 800 Wide
240 480 580
240 480 5800.9 500 Wide
1.15 400 Coil 170 340 375
INBAR 200.9 400 Coil 125 150 180
1.2 300 Coil 140 280 300
INBAR 22 1.00 350 Wide 240 480 580
INBAR 25 1.00 300 Wide 240 480 580
Metzerplas reserves the right to redesign/modify its products and change the information in this document at any time without prior notice and without incurring any responsibility or liability for errors published here.
» On flat ground» Representative tables only. For further information, please refer to the Irrimetzer software.
* Number of drums per pallet: Wide – 24, Narrow - 36
LIN
Features• Light flat integral dripper• Large clog-resistant inlet filter• Short and wide labyrinth with turbulent flow pattern - prevents particle settling
RootGuard® configuration is available for extra protection against root intrusion in SDI systems.
Multi-Purpose Integral DripperVersatile – Seasonal or multi-seasonal use, according to dripline specifications
Row crops
Light Flat Integral Dripper
Technical DataDripper flow rates: 0.8 / 1.2 / 1.6 / 2.0 / 4.0 l/h
Dripline diameters: 12 / 16 / 17 / 20 / 22 and 25 mm
Dripline wall thickness: 0.15-1.0 mm
Applications» Row crops» Landscaping» Greenhouses» Vegetables» Sugarcane» Industrial crops» Gravity systems/ Small household plots
Greenhouses
Landscaping
Applications
Large Clog-Resistant Inlet Filter
Wide Turbulent Flow Labyrinth
Row crops
Lin
En 1
016
LIN Dripline - Technical DataModel
Inside Diameter
(mm)
Wall Thickness
(mm)
Min. Working Pressure
(bar)
Max. Working Pressure
(bar)Exponent Kd
LIN 12 11.150.4
0.52.0
0.47– 0.49 0.30.6 2.5
LIN 16
15.80.15-0.25
0.5
1.5
0.47– 0.49
0.180.3-0.4 2.0
15.2 0.5-0.6 2.5 0.2
13.8 0.9 3.5 0.25
LIN 1715.8
0.4
0.5
2.0
0.47– 0.490.18
0.5-0.6 2.53.5
15.00.9
0.21.0 4.0
LIN 20 17.40.9
0.53.5
0.47– 0.49 0.181.0 4.0
LIN 2221.2
0.3
0.5
1.5
0.47– 0.490.060.4 2.0
0.5-0.6 2.5
21.0 1.0 3.5 0.08
* Number of drums per pallet: Wide – 24, Narrow - 36
Packaging DataModel
Wall Thickness
(mm)Drum Length (m) Number of Coils/
Drums*per Container
20’ 40’ 40’ HC
LIN 120.4 1200 Narrow
360 720 8280.6 800 Narrow
LIN 16
0.15
Spacing above 25 cm – 3000 Narrow
360 720 828
Spacing 20-25 cm – 2500 Narrow
Spacing below 20 cm – 2000 Narrow
0.2
Spacing above 25 cm – 2500 Narrow
Spacing 20-25 cm – 2000 Narrow
Spacing below 20 cm – 1600 Narrow
0.4 1000 Narrow 360 720 828
0.6 800 Wide 240 480 580
0.9 500 Wide
LIN 170.6 800 Wide
240 480 5800.9 500 Wide
LIN 20 0.9 300 Narrow 360 720 828
LIN 220.4 1000 Narrow
360 720 8280.6 800 Narrow
LIN 12 Max. Lateral Length (ID 11.15 mm, WT 0.6 mm, Inlet Pressure 2.5 bar)
Nominal Flow Rate (l/h) Spacing between Drippers (m)
0.20 0.30 0.40 0.50 0.60 0.75 1.000.8 66 88 107 125 141 164 1981.2 51 68 83 96 109 126 1531.6 41 55 68 79 89 104 1262.0 36 48 58 68 77 90 1094.0 22 30 37 43 49 57 69
LIN 16 Max. Lateral Length (ID 15.2 mm, WT 0.6 mm, Inlet Pressure 2.5 bar)
Nominal Flow Rate (l/h) Spacing between Drippers (m)
0.20 0.30 0.40 0.50 0.60 0.75 1.000.8 114 151 184 214 242 280 3391.2 87 116 142 165 186 216 2611.6 71 95 116 135 153 177 2152.0 62 82 101 117 132 153 1864.0 39 52 64 74 84 97 118
LIN 20 Max. Lateral Length (ID 17.4 mm, WT 0.9 mm, Inlet Pressure 3.5 bar)
Nominal Flow Rate (l/h) Spacing between Drippers (m)
0.20 0.30 0.40 0.50 0.60 0.75 1.000.8 148 197 239 278 313 363 4381.2 114 151 184 214 241 280 3381.6 93 124 151 175 198 229 2772.0 80 107 130 152 171 198 2404.0 50 67 82 96 108 126 152
White Cover - 8 mil (0.2 mm) and upBrown Cover - 6 mil (0.15 mm)
www.metzer-group.com Kibbutz Metzer, M.P Hefer 3882000, Israel
+972 4 6387001 +972 4 6385385 [email protected]
Metzerplas reserves the right to redesign/modify its products and change the information in this document at any time without prior notice and without incurring any responsibility or liability for errors published here.
» On flat ground» At 10% flow variation » Representative tables only. For further information, please refer to the Irrimetzer software.
MINI LIN Small Flat Integral Dripper
Wide Turbulent FlowLabyrinth
Large Clog-ResistantInlet Filter
Features• Optimal choice for seasonal use• Cost-effective dripper• Compactandefficient,forlighttubes up to 0.4 mm wall thickness • Short,widelabyrinthwithturbulentflow- prevents particle settling • Largeinletfilter,highlyclog-resistant
Miniature Cost-EffectiveDripper Compactandefficient,forlighttubes up to 0.4 mm wall thickness
TechnicalDataDripperflowrates: 1.0 / 1.6 l/h
Driplinediameters: 12 / 16 / 22 mm
Driplinewallthickness: 0.15-0.4 mm
Applications» Row crops» Landscaping» Greenhouses» Vegetables» Sugarcane» Industrial crops» Gravity systems / Small household plots
Row crops
Greenhouses
Landscaping
Applications
Row crops
Min
i Lin
En
1016
MINILINDripline-TechnicalData
PackagingData
ModelWall
Thickness (mm)
Lateral Length (m)Drum
Number of Drums** per Container
20’ 40’ 40’ HC
MINI LIN 12
0.2 2800 Narrow360 720 880
0.3 2500 Narrow
MINI LIN 16
0.15 3500 Narrow
360 720 8800.2 2500 Narrow
0.25 2000 Narrow
0.3 1800 Narrow
MINI LIN 22
0.3 1800 Narrow360 720 880
0.4 1500 Narrow
www.metzer-group.com Kibbutz Metzer, M.P Hefer 3882000, Israel
+972 4 6387001 +972 4 6385385 [email protected]
White Cover - 8 mil (0.2 mm) and up
MINI LIN 12 Max.LateralLength(ID11.15mm,WT0.4mm,InletPressure2.0bar)
Nominal Flow Rate (l/h) Spacing between Drippers (m)
0.20 0.30 0.40 0.50 0.60 0.75 1.001 62 81 98 113 127 146 176
1.6 46 60 72 84 94 109 130
MINI LIN 16 Max.LateralLength(ID15.8mm,WT0.4mm,InletPressure2.0bar)
Nominal Flow Rate (l/h) Spacing between Drippers (m)
0.20 0.30 0.40 0.50 0.60 0.75 1.001.0 110 145 173 200 225 260 3131.6 81 107 130 151 167 193 232
MINI LIN 22 Max.LateralLength(ID21.2mm,WT0.4mm,InletPressure2.0bar)
Nominal Flow Rate (l/h) Spacing between Drippers (m)
0.20 0.30 0.40 0.50 0.60 0.75 1.001.0 192 247 295 340 380 438 5251.6 142 182 218 252 282 324 389
Brown Cover - 6 mil (0.15 mm)
» On flat ground» At 10% flow variation» Representative tables only. For further information, please refer to the Irrimetzer software.
Metzerplas reserves the right to redesign/modify its products and change the information in this document at any time without prior notice and without incurring any responsibility or liability for errors published here.
ModelInside
Diameter(mm)
Wall Thickness
(mm)
Min. Working Pressure
(bar)
Max. Working Pressure
(bar)Exponent Kd
11.15 0.2-0.3 0.5 2.0 0.47 0.18MINI LIN 12
MINI LIN16 15.8
0.15-0.20.5
1.50.47– 0.49 0.13
0.3-0.4 2.0
MINI LIN22 21.2
0.30.5
1.50.47– 0.49 0.05
0.4 2.0
SUPER COMPACT
Features• Small soft cylindrical integral dripline• Highly cost-effective• Flexible dripper structure allows flat packaging, thus reducing freight volume• Double cylindrical inlet filter for best clog-resistance• Suitableforeffluentreuseandlowqualitywater
Flexible Solution Cylindrical dripper advantages, at a reduced cost
Small Soft Cylindrical Integral Dripper
Technical DataDripper flow rate: 1.4 l/h
Dripline diameter:16 mm
Dripline wall thickness:0.65 mm
Applications» Greenhouses » Orchards» Row crops» Turf and landscaping» Vegetables
Greenhouses
LandscapingRow crops
Orchards
Applications
Flexible CylindricalDripper
Wide Turbulent Flow Labyrinth
Cylindrical Clog-ResistantInlet Filter
SUPER COMPACT Dripline - Technical Data
ModelInside
Diameter (mm)
Wall Thickness
(mm)
Min. Working Pressure
(bar)*
Max. Working Pressure
(bar)Exponent Kd
SUPER COMPACT
1614.7 0.65 0.5 2.5 0.58 0.15
* For efficient dripline flushing, the recommended minimum working operation is 0.5 bar.
** Number of drums per pallet: Wide – 24
Packaging DataModel Coil Length (m)
DrumNumber of Drums**
per Container
20’ 40’ 40’ HC
SUPER COMPACT
16500 Wide 240 480 580
Supe
r Com
pact
En
1016
www.metzer-group.com Kibbutz Metzer, M.P Hefer 3882000, Israel
+972 4 6387001 +972 4 6385385 [email protected]
SUPER COMPACT 16 Max. Lateral Length (ID 14.7 mm, WT 0.65 mm, Inlet Pressure 2.5 bar)
Nominal Flow Rate (l/h) Spacing between Drippers (m)
0.20 0.30 0.40 0.50 0.60 0.75 1.00
1.4 67 89 108 125 141 163 197
Metzerplas reserves the right to redesign/modify its products and change the information in this document at any time without prior notice and without incurring any responsibility or liability for errors published here.
» On flat ground» At 10% flow variation» Representative table only. For further information, please refer to the Irrimetzer software.
VARDIT
Features• Efficient and cost-effective flat dripper • Wide range of working pressures for various topographies• Uniform flow rate• Expanded inlet filter• Highly accurate pressure-compensating labyrinth mechanism• Wide water passages along the labyrinth• Suitablefordifferentwatersources• Long-lasting silicon diaphragm• Durable under harsh field conditions and chemical applications
PC Dripper
Technical DataDripper flow rates: 0.85 / 1.2 / 1.6 / 2.1 / 3.4 l/h
Dripline diameters: 16 / 17 / 20 / 22 / 25 mm
Dripline wall thickness: 0.4 - 1.25 mm
Applications» Greenhouses» Orchards» Row crops» Landscaping» Vineyards» Vegetables» Industrial crops
Unique PC MechanismUnique and accurate pressure-compensating labyrinth mechanism
Primary Labyrinth
Primary Labyrinth with Wide Water Passages
Large Inlet Filter
Chemical-Resistant Silicon Diaphragm
Self-Flushing PC Labyrinth
Greenhouses
LandscapingRow crops
Orchards
Applications
VARDIT Dripline - Technical Data
VARDIT 17 Max. Lateral Length (ID 15.8 mm, WT 0.6 mm, Inlet Pressure 2.5 bar)
Nominal Flow Rate (l/h) Spacing between Drippers (m)
0.20 0.30 0.40 0.50 0.60 0.75 1.00
0.85 227 304 371 433 489 567 686
1.2 181 243 297 346 391 455 550
1.6 150 201 247 288 325 378 458
2.1 126 169 207 242 273 318 385
3.4 92 124 152 177 201 233 283
VARDIT 20 Max. Lateral Length (ID 17.4 mm, WT 0.9 mm, Inlet Pressure 3.5 bar)
Nominal Flow Rate (l/h) Spacing between Drippers (m)
0.20 0.30 0.40 0.50 0.60 0.75 1.00
0.85 340 446 538 623 700 809 972
1.2 272 357 431 499 561 648 780
1.6 226 296 358 415 467 540 649
2.1 189 249 301 348 392 453 546
3.4 138 182 221 256 288 333 401
VARDIT 16 Max. Lateral Length (ID 15.2 mm, WT 0.6 mm, Inlet Pressure 2.5 bar)
Nominal Flow Rate (l/h) Spacing between Drippers (m)
0.20 0.30 0.40 0.50 0.60 0.75 1.00
0.85 214 286 349 406 458 532 642
1.2 171 228 279 325 367 426 515
1.6 142 189 232 270 305 354 429
2.1 119 159 194 227 256 297 360
3.4 87 116 142 166 188 219 265
VARDIT 25 Max. Lateral Length (I.D 24.7 mm, W.T 1.0 mm, Inlet Pressure 3.5 bar)
Nominal Flow Rate (l/h) Spacing between Drippers (m)
0.20 0.30 0.40 0.50 0.60 0.75 1.00
0.85 565 733 880 1015 1139 1313 1576
1.2 513 666 801 924 1038 1196 1437
1.6 426 554 666 768 863 995 1196
2.1 357 465 560 646 726 837 1005
3.4 262 341 411 474 533 615 739
Vard
it En
101
6
ModelInside
Diameter (mm)
Wall Thickness
(mm)
Min. Working Pressure
(bar)
Max. Working Pressure
(bar)Kd
VARDIT 16
15.8 0.4
0.8
2.00.2
15.2 0.6 2.5
13.8 0.9-1 3.5 0.27
VARDIT 1715.8 0.6
0.82.5
0.215.0 0.9-1 3.5
VARDIT 20 17.4 0.9-1.25 0.83.5
0.14.3
VARDIT 22 21 0.4-1.0 0.8 3.5 0.08
VARDIT 25 24.7 0.4-1.0 0.8 3.5 0.05
* Number of drums per pallet: Wide – 24, Narrow – 36
Packaging Data
ModelWall
Thickness (mm)
Coil/Drum Length (m) Number of Coils/Drums*
per Container
20’ 40’ 40’HC
VARDIT 16
0.4 1000 Narrow 360 720 880
0.6 800 Wide240 480 580
0.9 500 Wide
1.00 400 Coil 170 340 375
VARDIT 17
0.620cm spacing - 600 Wide
240 480 580Other spacing - 800 Wide
0.9 500 Wide
1.15 400 Coil 150 300 375
VARDIT 200.9 400 Wide 240 480 580
1.15 300 Coil 140 280 300
VARDIT 22 1.00 350 Wide 240 480 580
VARDIT 25 1.00 300 Wide 240 480 580
www.metzer-group.com Kibbutz Metzer, M.P Hefer 3882000, Israel
+972 4 6387001 +972 4 6385385 [email protected]
Metzerplas reserves the right to redesign/modify its products and change the information in this document at any time without prior notice and without incurring any responsibility or liability for errors published here.
» On flat ground» Representative tables only. For further information, please refer to the Irrimetzer software.
VERED
Features• The most popular dripper for orchards• Excellent field performance under harsh conditions • Highly durable and reliable structure• Unique and accurate pressure-compensating labyrinth mechanism• Wide water passages with turbulent flow pattern• Advanced self-flushing mechanism at the beginning and at the end of each irrigation cycle• Large clog-resistant inlet filter• Wide compensation range, up to 4.3 bar
RootGuard® configuration is available for extra protection against root intrusion in SDI systems.
Flat Heavy-Duty PC Dripper
Technical DataDripper flow rates: 1.2 / 1.6 / 2.1 / 3.5 l/h
Dripline diameters: 16 / 17 / 20/ 22 / 25 mm
Dripline wall thickness: 0.6-1.25 mm
Applications» Row crops» Orchards » Landscaping» Vineyards» Vegetables
Large Inlet Filter
Chemical-Resistant Silicon Diaphragm
Self-Flushing PC Labyrinth
Unique PC MechanismUnique and accurate pressure-compensating labyrinth mechanism
Primary Labyrinth
Primary Labyrinth with Wide Water Passages
Landscaping
Row crops Orchards
Applications
VERED Dripline - Technical Data
ModelInside
Diameter (mm)
Wall Thickness
(mm)
Min. Working Pressure
(bar)
Max. Working Pressure
(bar)Kd
VERED 1615.2 0.6 0.5 2.5 0.65
13.8 0.9 0.5 3.5 0.95
VERED 17 15.00.9
0.53.5
0.71.15 4.3
VERED 20 17.41.0
0.53.5
0.451.25 4.3
VERED 22 21.0 1 0.5 3.5 0.24
VERED 25 24.7 1 0.5 3.5 0.21
* Number of drums per pallet: Wide – 24, Narrow – 36** Available also in coil length shorter than 400m
Packaging Data
ModelWall
Thickness (mm)
Coil/Drum Length (m) Number of Coils/Drums*
per Container
20’ 40’ 40’HC
VERED 160.6 800 Wide*
240 480 5800.9 500 Wide**
VERED 170.9 500 Wide 240 480 580
1.15 400 Coil 170 340 375
VERED 200.9 400 Wide** 240 480 580
1.25 300 Coil 140 280 300
VERED 22 1.00 350 Wide 240 480 580
VERED 25 1.00 300 Wide 240 480 580Ve
red
En 1
016
www.metzer-group.com Kibbutz Metzer, M.P Hefer 3882000, Israel
+972 4 6387001 +972 4 6385385 [email protected]
VERED 17 Max. Lateral Length (ID 15.0 mm, WT 0.9 mm, Inlet Pressure 3.5 bar)
Nominal Flow Rate (l/h) Spacing between Drippers (m)
0.20 0.30 0.40 0.50 0.60 0.75 1.00
1.2 159 225 284 340 391 463 573
1.6 131 186 236 282 325 384 476
2.1 110 156 197 236 272 322 400
3.5 78 111 141 169 195 231 287
VERED 16 Max. Lateral Length (ID 15.2 mm, WT 0.6 mm, Inlet Pressure 2.5 bar)
Nominal Flow Rate (l/h) Spacing between Drippers (m)
0.20 0.30 0.40 0.50 0.60 0.75 1.00
1.2 144 202 255 304 350 414 511
1.6 119 167 212 252 290 343 424
2.1 99 140 177 211 243 288 356
3.5 71 100 127 152 175 207 256
VERED 20 Max. Lateral Length (ID 17.4 mm, WT 1.0 mm, Inlet Pressure 3.5 bar)
Nominal Flow Rate (l/h) Spacing between Drippers (m)
0.20 0.30 0.40 0.50 0.60 0.75 1.00
1.2 219 306 384 456 523 616 758
1.6 151 253 319 379 434 512 630
2.1 151 212 267 317 364 429 529
3.5 108 152 191 228 261 309 881
» On flat ground» Representative tables only. For further information, please refer to the Irrimetzer software.
Metzerplas reserves the right to redesign/modify its products and change the information in this document at any time without prior notice and without incurring any responsibility or liability for errors published here.