DIGITAL CATALOG Microminiature Coaxial Connectors SSMB-SSLB-SSMC 127-7.pdfassemblies using SSMB, SSLB, and SSMC connectors. With experience in producing thousands of microminiature

APPLIED ENGINEERING PRODUCTS104 John W. Murphy Drive • P.O. Box 510 • New Haven, CT 06513

(203) 776-2813 • FAX (203) 776-8294

www.aep.us • e-mail: [email protected]

SSMBSSLBSSMC

DIGITAL CATALOG

MicrominiatureCoaxialConnectors

SSMB/SSLB/SSMC Microminiature ConnectorsClick at the bottom of any page to go to the AEP website.

Contents

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Technical Information

Special features and options. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Mated-pair dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Interfaces and specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

VSWR data. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

SSMB Series

Cable connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Bulkhead mounted receptacles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

P.C. board receptacles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Panel mounted receptacles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Adapters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

SSLB Series

Cable connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Vibration-proof float mount plugs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Bulkhead mounted receptacles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17


SSMC Series

Cable connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Bulkhead mounted receptacles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22


Panel mounted receptacles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Adapters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

P.C. Board Mounted Cable Terminations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Assembly Tooling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Index by AEP Part Number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

About AEP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

(Click on any line to jump to the page)

(203) 776-2813 • FAX (203) 776-8294APPLIED ENGINEERING PRODUCTS

www.aep.us • [email protected] 1

http://www.aepconnectors.com

SSMB/SSLB/SSMC Microminiature Connectors

SSMB (snap-on mating), SSLB (slide-on mating), and SSMC (screw-on mating) microminiatureconnectors from AEP can be the answer you’re looking for in your applications that are shorton space but need to be long on performance.

Although SSMB and SSMC connectors are about a third smaller than SMB and SMC connectors,AEP’s design skills and materials engineering make them remarkably rugged—in most cases, even more reliable than their largercounterparts. For example, AEP’s SSMBconnectors have been tested to over1,000 mating cycles (twice the MIL-spec requirement) without loss of performance. And because they areincluded inMIL-PRF-39012, you don’t haveto take the risk of using a proprietarydesign—AEP’s SSMB and SSMC connectors arefully intermateable with other manufacturers’ parts.

The superior electrical characteristics of SSMB andSSMC connectors (see page 6) even makes them an alternative to much larger SMA connectors in many applications.

In this catalog, you’ll find such innovative and usefulconfigurations as:

• P.C. board receptacles with pretinned legs and contacts (see page 3 for more information);

• Surface-mountable P.C. board receptacles, in top and edge mount types (see page 3 for more information);

• P.C. board cable terminations, for easy, permanent attachment of cable to P.C. boards withoutthe need to pigtail cable braid (see page 28);

• Vibration-proof, float mounted SSLB plugs, ideal for use in rack-and-panel applications withmultiple connector pairs (see page 4 for more information)

All SSMB, SSLB, and SSMC connectors are gold-plated for superior electrical and environmental performance.

Save yourself time, money, and trouble—call the experts at AEP for complete cable assemblies using SSMB, SSLB, and SSMC connectors. With experience in producing thousandsof microminiature cable assemblies for such demanding applications as SINCGARS (the U.S.Army’s primary tactical field radio system), AEP can provide you with complete, tested, guaranteed cable assemblies—flexible or semi-rigid; any size, any quantity.

.345"

SMBSMA

.237"

SSMB

P.C. BOARD

.375"

SMB

SMA

SSMB

P.C. BOARD

.625".510"

.775"

Right angle PCB receptacle and straight cable plug

HOW THEY STACK UP:HOW THEY STACK UP:HOW THEY STACK UP:(mated pairs)

(SSMC series offers similar space savings vs. SMC and SMA)

Straight PCB receptacle and right angle cable plug

Introduction






AEP pretinned P.C. board receptacles are shipped with a tightly-controlled layer of solder on the legs and center conductor, eliminating gold embrittlement in solder joints. Nickel-plated connectors with pretinned legs have the solderability of gold or silver-plated connectors at lower cost.

Computer-controlled, automated solder-dipping equipment and custom fixturingensure precise, consistent coverage to AEP standard specification (see above), or customer-specified requirements.Tinned areas meet the solderability requirements of MIL-STD-202, Method 208 aftereight hours steam aging. Pretinned legs are available on most P.C. board receptaclesin this catalog—see product pages for part numbers.

P.C. board

Pan

el

P.C. board

Panel

P.C

. bo

ard

Panel

Pan

el

P.C

. b

oard

P.C

. bo

ard

P.C. boardP.C. board

SSMB/SSLB/SSMC Features and Options

Solder(center conductor)

Printed circuit board

Solder (leg) (typ.)

Ground trace

Ground trace

Signal trace

Solder(bottom legs andcenter conductor)

Solder(top legs)

Printed circuit board

P.C. boardSolder (center conductor)

Solder (legs)

Printed circuit boardGround trace

Ground trace

Signal trace

Solder (leg)

Solder (leg)

Surface Mount P.C. Board Receptacles

P.C. Board Receptacles with Standoff Legs

P.C. Board Receptacles with Pretinned Legs and Contacts

Edge mount Top mount

AEP SSMB and SSMC surface-mount P.C. board receptacles are available in top mount and edge mount types (see below). when mounted, they withstand torque, shear, and pull forces greatly in excess of standard mating and unmating forces. Tape-and-reel packaging is available for top-mount versions.AEP surface-mount P.C. board receptacles meet all interface requirements of MIL-STD-348, and appropriate performance requirements of MIL-PRF-39012. Most configurations can also be furnished with pretinned legs (see bottom of this page) for convenient, reliable assembly.Edge-mount types in this catalog are designed for .031" thick P.C. boards, but they are readily available for boardsup to .045" thick. Connectors for thicker boards can be supplied by special order.

Combining AEP’s surface-mount technology with various body styles and interfaces can provide an almostunlimited variety of configurations—these are just a few examples.

Straight and right-angle bulkhead mounted jacks (edge mount)

Edge mount jack and top mount plug in

daughtercard application

Edge mount, crimp typecable termination for hardwiring cable to boardwithout drilling board or pigtailing cable

Straight and right-angle bulkheadmounted jacks (top mount)

AEP P.C. board receptacles with steppedlegs raise the connector body above theboard surface, allowing free flow of cleaning solutions and air, as well as providing space for visual inspection. P.C. board

.020

Standoffs milled into legs hold theconnector body a precise distanceabove the board during soldering.

Hot solder dip (legs and contact)Sn63, .002–.005 thick, to within .040 of body, 95% minimum coverage, gold removed during tinning operation.




SSMB/SSLB/SSMC Features and Options

AEP’s vibration-proof float mounted plugs (SSLB seriesonly) use a tempered spring washer within the mounting system for reliable grounding between the connector andthe panel under vibration. Mounting integrity is augmented by the Truarc retaining ring, which providesalmost 360˚ of contact within its retaining groove, asopposed to the 10–20˚ of contact typical of C-ring or E-ring retaining clips. This makes it virtually impossibleto dislodge the connectors from their panel mountingsunder any conditions of mechanical stress.This system, combined with closed-end mating hoodsand inner female contacts, allows the connectors a widerange of float while mating without damage to the connectors. Their reliability has been proven throughthousands of hours of flight time in avionics systemsover the past ten years without a single field failure.

Vibration-Proof Float Mounted Plugs (see page 14)

Mated-Pair Dimension Examples

Pa

ne

l

Pa

ne

l

Misaligned mating connectorspress against the tapered hoodduring mating...

...and the hood guides the float-mounted connector into alignment for proper mating, while the spring washer deflects to accommodatethe angular and radial movement with no loss of grounding.

The examples below illustrate working dimensions for some common connector pair applications (SSMB and SSLB series connectors). Multiple pairs can be placed on spacing as close as .200" centerlines.Mated pairs of SSMC connectors have similar envelope dimensions, but additional space should be allowed on all axes for wrench access when mating.

Right angle cable plug (7405 series) and straightP.C. board jack receptacle(7209 series)

Right angle cable plug (7405 series) and straight bulkhead jack receptacle (7219 series)

.405

P.C. board

P.C. board

.075

Panel

Panel

A

Panel

Panel

.432.510

P.C. board

.159.237

P.C. board

.157.235

Panel .427.505

Panel

Straight cable plug (7202 series) and right angle P.C. board jackreceptacle (7210 series)

Right angle cable jack (7441 series) and recessedbulkhead jack receptacle (7496 series)

Straight bulkhead jack receptacle (7219 series) and recessed bulkhead jack receptacle (7496 series)

Straight P.C. board plug(7225 series) and straightP.C. board jack (7209 series)

Right angle float-mountedcable plug (7335 series)and straight bulkheadcable jack (7303 series):

Panel Thickness ‘A’.050" .360.093" .274




SSMB/SSLB /SSMC SpecificationsSSMB Interface Dimensions

Plug

Jack

Jack

Jack

SSLB Interface Dimensions

Plug

SSMC Interface Dimensions

Plug

.185 max dia.

Closed-entry contactaccepts .014–.015 dia. pin

.053max dia.

.070 max.

Reference plane

.000 min..033 min.

.122 min.

90˚

.105 max dia. .033 max.054 min dia.

.014/.015 dia.

.000/.015

Reference plane

.122 See detail above

.075 min

CL .028/.029

.075 min

.003/.006

Reference plane

.185 max dia.


.053max dia.

.070 max.

Reference plane

.000 min..033 min.

.122 min.

.033 max

.000/.015

.122

.075 min.075 minReference plane

.105 max dia.

.054 min dia.

.014/.015 dia.

.101 min dia.


.053 max dia.

6–40 UNF-2B thread

Reference plane

.000 min..090 max.

.200 max.

Hex 5/32 A. F.

.100 max dia. .000 min.054 min dia.

.014/.015 dia.

.000/.015

.033 max

.118.170 min

.090 minReference plane

6–40 UNF-2A thread

Specifications

SSMB and SSLB (MIL-PRF-39012 as applicable)Materials:Plug spring fingers, center contacts: Beryllium copper per ASTM-B-196, Condition HT. Crimp sleeves: Seamless copper tube per ASTM-B-75, type C12000, temper: light anneal 050. Other metal parts: Brass per ASTM-B-16, Alloy 360, 1⁄2 hard.Insulators: Teflon (TFE) per ASTM-D-1710.Finish:Center contacts: Gold plated per current revision of MIL-PRF-39012*Other metal parts: Gold plated to meet current MIL-PRF-39012 corrosion requirements.*Electrical:Impedance: 50Ω. Frequency range: DC–12.4 GHz. Voltage Rating: 250VRMS @ sea level; 60 VRMS @ 70,000 ft.Insulation Resistance: 1,000 megohms minimum.Contact Resistance:Center contact: Initial: 4.0 milliohms maximum;

after environmental test conditions: 6.0 milliohms maximum.Outer contact: Initial: 1.0 milliohms maximum;

after environmental test conditions: 1.5 milliohms maximum.Cable braid to body: Initial: 1.0 milliohms maximum; after environmental test conditions: N/A.Corona level: 125V @70,000 ft. RF highpot: 400 VRMS @ 5 MHz.RF leakage: -70 dB min @ 2–3 GHz. Insertion loss: .30 dB max @ 1.5 GHz.VSWR: Cable Straight connector Right angle connector

RG-178 1.25 + (.020 x F[GHz]) 1.25 + (.030 x F[GHz])RG-316 1.30 + (.020 x F[GHz]) 1.30 + (.030 x F[GHz]).085" semi-rigid 1.25 + (.015 x F[GHz]) 1.25 + (.025 x F[GHz])

Mechanical:Force to engage: SSMB: Initial, 6 pounds max engagement, 2 pounds min disengagement.

After 500 matings, 6 pounds max engagement, 1 pound min disengagement.SSLB: Initial, 3 pounds max engagement, .5 pounds min disengagement.

Contact retention: 2 pounds min axial force.Durability: 500 mating cycles.Environmental (MIL-STD-202):Temperature range: -65˚ C to +165˚ C. Corrosion: Method 101, condition B, 5% salt solution.Vibration (Method 204): SSMB: Condition B (15G), SSLB: Condition A (10G).Mechanical shock (Method 213): SSMB: Condition B, 75G @ 6 ms @ 1⁄2 sine, SSLB: N/A.

SSMC (MIL-PRF-39012 as applicable)Materials:Jack mating ends, center contacts: Beryllium copper per ASTM-B-196, Condition HT. Crimp sleeves: Seamless copper tube per ASTM-B-75, type C12000, temper: light anneal 050. Other metal parts: Brass per ASTM-B-16, Alloy 360, 1⁄2 hard.Insulators: Teflon (TFE) per ASTM-D-1710.Finish:Center contacts: Gold plated per current revision of MIL-PRF-39012*Other metal parts: Gold plated to meet current MIL-PRF-39012 corrosion requirements.*Electrical:Impedance: 50Ω. Frequency range: DC–12.4 GHz. Voltage Rating: 250VRMS @ sea level; 60 VRMS @ 70,000 ft.Insulation Resistance: 1,000 megohms minimum.Contact Resistance:Center contact: Initial: 4.0 milliohms maximum;

after environmental test conditions: 6.0 milliohms maximum.Outer contact: Initial: 1.0 milliohms maximum;

after environmental test conditions: 1.5 milliohms maximum.Cable braid to body: Initial: 1.0 milliohms maximum; after environmental test conditions: N/A.Corona level: 125V @70,000 ft. RF highpot: 400 VRMS @ 5 MHz.RF leakage: -50 dB min @ 2–3 GHz. Insertion loss: .30 dB max @ 1.5 GHz.VSWR: Cable Straight connector Right angle connector

RG-178 1.20 + (.020 x F[GHz]) 1.20 + (.030 x F[GHz])RG-316 1.25 + (.020 x F[GHz]) 1.25 + (.030 x F[GHz]).085" semi-rigid 1.20 + (.015 x F[GHz]) 1.20 + (.025 x F[GHz])

Mechanical:Force to engage: 16 inch-ounces torque max.Mating torque: 28–32 inch-ounces.Coupling nut pulloff resistance: 25 pounds min.Contact retention: 2 pounds min axial force.Durability: 500 mating cycles.Environmental (MIL-STD-202):Temperature range: -65˚ C to +165˚ C. Corrosion: Method 101, condition B, 5% salt solution.Vibration (Method 204): Condition D (20G).Mechanical shock (Method 213): Condition B, 75G @ 6 ms @ 1⁄2 sine.

*These specifications change periodically with updates to MIL-PRF-39012 requirements.Contact factory for latest specifications.



www.aep.us • [email protected]

Frequency limit, SMB

VS

WR

1.1

21 GHz 3 4 5 6 7 8 9 10 11 12 12.4

1.2

1.3

1.4

1.5

SMBSMASSMB MCXFrequency limit, MCX and MMCX

MMCX

6

SSMB/SSLB /SSMC SpecificationsVSWR Data

VS

WR

1.1

21 GHz 3 4 5 6 7 8 9 10 11 12 12.4

1.2

1.3

1.4

1.5

VS

WR

1.1

21 GHz 3 4 5 6 7 8 9 10 11 12 12.4

1.2

1.3

1.4

1.5

Straight plug, RG-178 flexible cable (7202-1572-002) Straight plug, RG-178 flexible cable (7002-1571-002)

Frequency limit, SMC

VS

WR

1.1

21 GHz 3 4 5 6 7 8 9 10 11 12 12.4

1.2

1.3

1.4

1.5Frequency limit, MCX and MMCX

SMCSMASSMC MCX MMCX

Straight plug, RG-178 flexible cable (7202-1572-002) Straight plug, RG-178 flexible cable (7002-1571-002)

VS

WR

1.1

21 GHz 3 4 5 6 7 8 9 10 11 12 12.4

1.2

1.3

1.4

1.5

VS

WR

1.1

21 GHz 3 4 5 6 7 8 9 10 11 12 12.4

1.2

1.3

1.4

1.5

Straight plug, .085" semi-rigid cable (7202-1542-010) Straight plug, .085" semi-rigid cable (7002-1541-010)

VS

WR

1.1

21 GHz 3 4 5 6 7 8 9 10 11 12 12.4

1.2

1.3

1.4

1.5

VS

WR

1.1

21 GHz 3 4 5 6 7 8 9 10 11 12 12.4

1.2

1.3

1.4

1.5

Right angle plug, RG-178 flexible cable (7405-1521-002) Right angle plug, RG-178 flexible cable (7105-1521-002)

VS

WR

1.1

21 GHz 3 4 5 6 7 8 9 10 11 12 12.4

1.2

1.3

1.4

1.5

VS

WR

1.1

21 GHz 3 4 5 6 7 8 9 10 11 12 12.4

1.2

1.3

1.4

1.5

Right angle plug, .085" semi-rigid cable (7405-1561-010) Right angle plug, .085" semi-rigid cable (7105-1561-010)

SSMB SSMC

Specification requirement Actual (Connectors tested using 200' of cable as load.)

Comparative VSWR

SSMB SSMC

VSWR limits for SMA, SMB, SMC, MCX, and MMCX from MIL-PRF-39012 and/or manufacturer specifications




SSMB Cable Connectors

*Substitute the appropriate cable group number for “XX” when ordering:

Straight Cable Plugs

Crimp type for flexible cable Solder type for semi-rigid cable

.53

Hex 5/32 A. F.

.180 dia.

.174

.70

Hex 5/32 A. F.

.180 dia.

AEP P/N

7202-1572-0XX*

AEP P/N

7202-1542-0XX*

Straight Cable Jacks


.46

Hex 5/32 A. F..174

.63

Hex 5/32 A. F.

AEP P/N

7201-1571-0XX*

AEP P/N

7201-1541-0XX*

Right Angle Cable Plugs


.166.244

.322

.421.343

.180 dia.

.156 Cube.421

.343

.174.252

.330

.180 dia.

.156 Cube

AEP P/N

7405-1521-0XX*

AEP P/N

7405-1561-0XX*

GROUP CABLE TYPES

02 RG178, RG196, M17/93, M17/169

03RG174, RG179, RG316, M17/113, M17/119, M17/172, M17/189

GROUP CABLE TYPES

05 RG178DS, RG196DS10 .085" semi-rigid, RG405, M17/13311 .047" semi-rigid, M17/151

GROUP CABLE TYPES

19RG174DS, RG316DS, M17/151,M17/152, Times RD-316

21 .056" semi-rigid

Cable assembly instructions are shipped with each connector.




SSMB Cable ConnectorsRight Angle Cable Jacks


.166.244

.322

.156 Cube.384

.306.384

.306

.174.252

.330

.156 Cube

AEP P/N

7441-1521-0XX*

AEP P/N

7441-1561-0XX*

Straight Bulkhead Mounted Cable Jacks (.093" max panel thickness)Crimp type for flexible cable Solder type for semi-rigid cable

.360 .19

Hex 5/32 A. F.Hex 3/16 A. F.

.140 dia.§

.126§

§ Recommendedmounting hole size,tolerance +.003, -.000

.140 dia.§

.126§


.174.360 .37

Hex 5/32 A. F.Hex 3/16 A. F.

AEP P/N

7203-1571-0XX*

AEP P/N

7203-1541-0XX*

Right Angle Bulkhead Mounted Cable Jacks (.125" max panel thickness)Crimp type for flexible cable Solder type for semi-rigid cable

Hex 3/16 A. F.

.492.386

.570

.166.244

.322

.156 Cube


.140 dia.§

.126§

Hex 3/16 A. F.

.492.386

.570

.174.252

.330

.156 Cube


.140 dia.§

.126§

AEP P/N

7406-1521-0XX*

AEP P/N

7406-1561-0XX*

These connectors can be supplied with other mating end lengths to accommodate a wide range of panel thicknesses—contact factory for availability.


GROUP CABLE TYPES

02 RG178, RG196, M17/93, M17/169

03RG174, RG179, RG316, M17/113, M17/119, M17/172, M17/189

GROUP CABLE TYPES


GROUP CABLE TYPES


21 .056" semi-rigid





SSMB Bulkhead Mounted ReceptaclesStraight Bulkhead Jack Receptacles (.093" max panel thickness)

Rear mount Front mount

.260.51

.150.080

Hex 5/32 A. F. Hex 3/16 A. F.

.036 dia.

.020 dia.

.140 dia.§

.126§


.360.51

.150.080

Hex 5/32 A. F.Hex 3/16 A. F.

.036 dia..020 dia.

.140 dia.§

.126§


AEP P/N

7204-1511-000

AEP P/N

7219-1511-000

Straight Bulkhead Plug Receptacles

Front mount

(.093"max panel thickness)Recessed mount

(.200"max panel thickness)

.036 dia..020 dia.

Hex 3/8 A. F.

Hex 3/16 A. F.9/32-40 UNS-2A thread

Hex 11/32 A. F..565

.365

.080

.030.57

.32 .150.080

Hex 3/16 A. F.

.036 dia.

.020 dia.

.180 dia. .140 dia.§

.126§


AEP P/N

7217-1512-000

AEP P/N

7496-1512-000

Right Angle Bulkhead Receptacles (.093" max panel thickness)Jack type Plug type

.180 dia.

.421.343

.143

.080

Hex 3/16 A. F.

.036 dia.

.020 dia.

.227

.48

.150

.140 dia.§

.126§

.156 sq.


.384.306

.143

.080

Hex 3/16 A. F.

.036 dia.

.020 dia.

.227

.48

.150

.140 dia.§

.126§

.156 sq.


AEP P/N

7212-1511-000

AEP P/N

7240-1511-000




SSMB P.C. Board ReceptaclesStraight P.C. Board Receptacles

Standard legs Standoff legs

.135

.419

.284

.100 (typ.)

.020 sq. (typ.)

.038 sq. (typ.)

.156 sq..026 dia.

.155

.419

.264.100 (typ.)

.020 sq. (typ.)

.156 sq.

.026 dia.

Surface mount Edge mount

.155

.419

.264.020 (typ.)

.156 sq.

.026 dia.

.031(P.C. boardthickness)

.025

.289

.264.038 (typ.)

.080.156 sq.

.026 dia.

Right Angle P.C. Board Receptacles


.161.245

.38

.135

.100 (typ.)

.156 sq..384

.306

.038 sq. (typ.)

.020 sq. (typ.)

.026 dia.

.384.306

.141.225

.38

.155.100 (typ.)

.020 sq. (typ.)

.156 sq.

.026 dia.

LEG FINISH AEP P/N

GOLD 7209-1511-000

LEG FINISH AEP P/N

PRETINNED 7209-1511-012

LEG FINISH AEP P/N

GOLD 7209-1511-011

LEG FINISH AEP P/N

PRETINNED 7209-1511-040

LEG FINISH AEP P/N

GOLD 7209-1511-015

LEG FINISH AEP P/N

GOLD 7210-1511-000

LEG FINISH AEP P/N

PRETINNED 7210-1511-012

LEG FINISH AEP P/N

GOLD 7210-1511-050

LEG FINISH AEP P/N

PRETINNED 7210-1511-040


.020 (typ.)

.156 sq.

.026 dia.


.384.306

.141.225

.38

.155

.163.247

.038 (typ.).080

.156 sq.

.026 dia..025

.384.306

LEG FINISH AEP P/N

GOLD 7210-1511-015

LEG FINISH AEP P/N

GOLD 7209-1511-023

LEG FINISH AEP P/N

PRETINNED 7209-1511-061

LEG FINISH AEP P/N

GOLD 7210-1511-060

LEG FINISH AEP P/N

PRETINNED 7210-1511-061




SSMB P.C. Board ReceptaclesStraight Bulkhead Mounted P.C. Board Receptacles (.125" max panel thickness)

Standard legs

Hex 3/16 A. F.

.140 dia.§

.126§

.155

.585.430

.386


.100 (typ.)

.020 sq. (typ.)

.156 sq.

.026 dia.

LEG FINISH AEP P/N

GOLD 7229-1511-000

PRETINNED 7229-1511-012

Standoff legs

Hex 3/16 A. F. .135

.585.450

.386.140 dia.§

.126§


.100 (typ.)

.020 sq. (typ.)

.038 sq. (typ.)

.156 sq..026 dia.

LEG FINISH AEP P/N

GOLD 7229-1511-050

PRETINNED 7229-1511-040

Surface mount

.455.386

Hex 3/16 A. F. .025

.140 dia.§

.126§


.038 (typ.)

.080.156 sq.

.026 dia.

LEG FINISH AEP P/N

GOLD 7229-1511-015

Edge mount

Hex 3/16 A. F.

.140 dia.§

.126§

.155

.585.430

.386


.020 (typ.)

.156 sq.

.026 dia.


LEG FINISH AEP P/N

GOLD 7229-1511-060

PRETINNED 7229-1511-061




SSMB P.C. Board ReceptaclesRight Angle Bulkhead Mounted P.C. Board Receptacles (.125" max panel thickness)

Standard legs

.141.225

.38

.155.100 (typ.)

.020 sq. (typ.)

.156 sq.

.026 dia.

Hex 3/16 A. F.

.492.386

.570


.126§

.140 dia.§

Hex 3/16 A. F.

.492.386

.570


.126§

.161.245

.38

.135

.100 (typ.)

.156 sq.

.038 sq. (typ.)

.020 sq. (typ.)

.026 dia.

.140 dia.§

.025

Hex 3/16 A. F.

.492.386

.570

§ Recommendedmounting hole size, tolerance +.003, -.000

.140 dia.§

.126§

.163.247

.038 (typ.)

.080.156 sq.

.026 dia.

Hex 3/16 A. F.

.492.386

.570


.126§

.141.225

.38

.155

.140 dia.§

.020 (typ.)

.156 sq.

.026 dia.


LEG FINISH AEP P/N

GOLD 7410-1511-000

PRETINNED 7410-1511-012

Standoff legs

LEG FINISH AEP P/N

GOLD 7410-1511-050

PRETINNED 7410-1511-040

Surface mount

LEG FINISH AEP P/N

GOLD 7410-1511-015

Edge mount

LEG FINISH AEP P/N

GOLD 7410-1511-060

PRETINNED 7410-1511-061




SSMB P.C. Board ReceptaclesStraight Plug Type P.C. Board Receptacles


.135

.472

.337

.180 dia. .100 (typ.)

.020 sq. (typ.)

.038 sq. (typ.)

.187 dia.

.026 dia.

.155

.472

.317

.187 dia.

.180 dia.

.100 (typ.)

.020 sq. (typ.)

.026 dia.


.187 dia.

.026 dia.

.020 (typ.)

.031 (P.C. board thickness)

.155

.472

.317

.180 dia.

.342

.317

.187 dia.

.026 dia.

.180 dia.

.054 (typ.)

.080

.025

Right Angle Plug Type P.C. Board Receptacles


.100 (typ.)

.156 sq.

.038 sq. (typ.)

.020 sq. (typ.)

.026 dia.

.421.343

.161.245

.38

.135

.180 dia.

.421.343

.141.225

.38

.155

.180 dia..100 (typ.)

.020 sq. (typ.)

.156 sq.

.026 dia.

LEG FINISH AEP P/N

GOLD 7225-1512-000

LEG FINISH AEP P/N

PRETINNED 7225-1512-012

LEG FINISH AEP P/N

GOLD 7225-1512-050

LEG FINISH AEP P/N

PRETINNED 7225-1512-040

LEG FINISH AEP P/N

GOLD 7225-1512-015

LEG FINISH AEP P/N

GOLD 7242-1511-000

LEG FINISH AEP P/N

PRETINNED 7242-1511-012

LEG FINISH AEP P/N

GOLD 7242-1511-050

LEG FINISH AEP P/N

PRETINNED 7242-1511-040


.020 (typ.)

.156 sq.

.026 dia.


.141.225

.38

.155

.421.343

.180 dia..025

.180 dia..163

.247

.038 (typ.).080

.156 sq.

.026 dia.

.421.343

LEG FINISH AEP P/N

GOLD 7242-1511-015

LEG FINISH AEP P/N

GOLD 7225-1512-060

LEG FINISH AEP P/N

PRETINNED 7225-1512-061

LEG FINISH AEP P/N

GOLD 7242-1511-060

LEG FINISH AEP P/N

PRETINNED 7242-1511-061




SSMB Receptacles and AdaptersStraight Panel Jack Receptacle (Stainless steel bodies)

4-hole flange 2-hole flange

.035

.140

.067 dia. (typ.)

.362.232

.500

.375

.065

.125

.026 dia.

.017 dia..084 dia.

.500

.375

.065

.125 .164 (typ.)

.067 dia. (typ.)

.281 sq.

.026 dia.

.017 dia.

AEP P/N

7498-1513-000

AEP P/N

7499-1513-000

Bulkhead Mounted Adapters

SSMB jack to SSMB jack SSMC jack to SSMB jack

.360.62

.200

Hex 5/32 A. F.

.140 dia.§

.126§


Hex 3/16 A. F.

.360.62

.200

Hex 5/32 A. F.Hex 3/16 A. F.

.140 dia.§

.126§


AEP P/N

7222-1501-000

AEP P/N

7022-1502-000

Adapters Between Series

N plug to SSMB jack SMA plug to SSMB jack

.78

1.22

AEP P/N

5011-1503-000

AEP P/N

5937-1503-000




SSLB Cable ConnectorsStraight Cable Plugs


.53

Hex 5/32 A. F.

.180 dia.

.174

.70

Hex 5/32 A. F.

.180 dia.

AEP P/N

7302-1572-0XX*

AEP P/N

7302-1542-0XX*



.166.244

.322

.421.343

.180 dia.

.156 Cube

.421.343

.174.252

.330

.180 dia.

.156 Cube

AEP P/N

7305-1521-0XX*

AEP P/N

7305-1561-0XX*

Right Angle Cable Jacks


.166.244

.322

.156 Cube.384

.306.384

.306

.174.252

.330

.156 Cube

AEP P/N

7341-1521-0XX*

AEP P/N

7341-1561-0XX*


GROUP CABLE TYPES

02 RG178, RG196, M17/93, M17/169

03RG174, RG179, RG316, M17/113, M17/119, M17/172, M17/189

GROUP CABLE TYPES


GROUP CABLE TYPES


21 .056" semi-rigid





SSLB Cable ConnectorsStraight Bulkhead Mounted Cable Jacks (.093" max panel thickness)


.360 .19

Hex 5/32 A. F.Hex 3/16 A. F.

.140 dia.§

.126§


.140 dia.§

.126§


.174.360 .37

Hex 5/32 A. F.Hex 3/16 A. F.

AEP P/N

7303-1571-0XX*

AEP P/N

7303-1541-0XX*

Vibration-Proof Float Mounted Plug (See page 2 for details)Straight—crimp type for flexible cable

.70

.174

Hex 5/32 A. F.§ From internal mating plane

(end of mating connector whenfully engaged) to rear of panel

§ .065

.180 dia.

.245

.242 dia.

Vibration-Proof Float Mounted Plug (See page 2 for details)Right angle—crimp type for flexible cable

.421.343

§ From internal mating plane(end of mating connector whenfully engaged) to rear of panel

§ .065

.180 dia.

.245 .174.252

.330

.156 Cube.242 dia.

PANELAEP P/N

THICKNESS

.050 7332-1572-0XX*

.093 7332-1572-3XX*

PANELAEP P/N

THICKNESS

.050 7335-1521-0XX*

.093 7335-1521-3XX*


GROUP CABLE TYPES

02 RG178, RG196, M17/93, M17/169

03RG174, RG179, RG316, M17/113, M17/119, M17/172, M17/189

GROUP CABLE TYPES


GROUP CABLE TYPES


21 .056" semi-rigid





SSLB Bulkhead Mounted ReceptaclesBulkhead Jack Receptacles (.093" max panel thickness)

Straight Right angle

.384.306

.143

.080

Hex 3/16 A. F.

.036 dia.

.020 dia.

.227

.48

.150

.140 dia.§

.126§

.156 sq.


.360.51

.150.080

Hex 5/32 A. F.Hex 3/16 A. F.

.036 dia..020 dia.

.140 dia.§

.126§


AEP P/N

7304-1511-000

AEP P/N

7312-1511-000

Straight Bulkhead Plug Receptacle (.250" max panel thickness)Recessed mount

.036 dia..020 dia.

Hex 3/8 A. F.

Hex 3/16 A. F.9/32-40 UNS-2A thread

Hex 11/32 A. F..565

.365

.080

.030

AEP P/N

7396-1512-000

Bulkhead Plug Receptacles (.093" max panel thickness)Straight Right angle

.180 dia.

.421.343

.143

.080

Hex 3/16 A. F.

.036 dia.

.020 dia.

.227

.48

.150

.140 dia.§

.126§

.156 sq.


.57.32 .150

.080

Hex 3/16 A. F.

.036 dia.

.020 dia.

.180 dia. .140 dia.§

.126§


AEP P/N

7317-1512-000

AEP P/N

7340-1511-000




SSLB P.C. Board ReceptaclesStraight P.C. Board Receptacles


.135

.419

.284

.100 (typ.)

.020 sq. (typ.)

.038 sq. (typ.)

.156 sq..026 dia.

.155

.419

.264.100 (typ.)

.020 sq. (typ.)

.156 sq.

.026 dia.


.155

.419

.264.020 (typ.)

.156 sq.

.026 dia.


.025

.289

.264.038 (typ.)

.080.156 sq.

.026 dia.



.161.245

.38

.135

.384.306

.100 (typ.)

.156 sq.

.038 sq. (typ.)

.020 sq. (typ.)

.026 dia.

.384.306

.141.225

.38

.155.100 (typ.)

.020 sq. (typ.)

.156 sq.

.026 dia.

LEG FINISH AEP P/N

GOLD 7309-1511-000

LEG FINISH AEP P/N

PRETINNED 7309-1511-012

LEG FINISH AEP P/N

GOLD 7309-1511-050

LEG FINISH AEP P/N

PRETINNED 7309-1511-040

LEG FINISH AEP P/N

GOLD 7309-1511-015

LEG FINISH AEP P/N

GOLD 7310-1511-000

LEG FINISH AEP P/N

PRETINNED 7310-1511-012

LEG FINISH AEP P/N

GOLD 7310-1511-050

LEG FINISH AEP P/N

PRETINNED 7310-1511-040


.384.306

.141.225

.38

.155

.020 (typ.)

.156 sq.

.026 dia.


.163.247

.038 (typ.).080

.156 sq.

.026 dia..025

.384.306

LEG FINISH AEP P/N

GOLD 7310-1511-015

LEG FINISH AEP P/N

GOLD 7310-1511-060

LEG FINISH AEP P/N

PRETINNED 7310-1511-061

LEG FINISH AEP P/N

GOLD 7309-1511-060

LEG FINISH AEP P/N

PRETINNED 7309-1511-061




SSLB P.C. Board ReceptaclesStraight Plug Type P.C. Board Receptacles


.135

.472

.337

.180 dia. .100 (typ.)

.020 sq. (typ.)

.038 sq. (typ.)

.187 dia.

.026 dia.

.155

.472

.317

.180 dia. .187 dia.

.100 (typ.)

.020 sq. (typ.)

.026 dia.


.187 dia.

.026 dia.

.020 (typ.)


.155

.472

.317

.180 dia.

.342

.317

.187 dia.

.026 dia.

.180 dia.

.054 (typ.)

.080

.025



.100 (typ.)

.156 sq.

.038 sq. (typ.)

.020 sq. (typ.)

.026 dia.

.421.343

.161.245

.38

.135

.180 dia.

.421.343

.141.225

.38

.155

.100 (typ.).020 sq. (typ.)

.156 sq.

.026 dia.

.180 dia.

LEG FINISH AEP P/N

GOLD 7325-1512-000

LEG FINISH AEP P/N

PRETINNED 7325-1512-012

LEG FINISH AEP P/N

GOLD 7325-1512-050

LEG FINISH AEP P/N

PRETINNED 7325-1512-040

LEG FINISH AEP P/N

GOLD 7325-1512-015

LEG FINISH AEP P/N

GOLD 7342-1511-000

LEG FINISH AEP P/N

PRETINNED 7342-1511-012

LEG FINISH AEP P/N

GOLD 7342-1511-050

LEG FINISH AEP P/N

PRETINNED 7342-1511-040


.020 (typ.)

.156 sq.

.026 dia.


.141.225

.38

.155

.421.343

.180 dia.

.025

.163.247

.421.343

.180 dia..038 (typ.)

.080

.156 sq.

.026 dia.

LEG FINISH AEP P/N

GOLD 7342-1511-015

LEG FINISH AEP P/N

GOLD 7325-1512-060

LEG FINISH AEP P/N

PRETINNED 7325-1512-061

LEG FINISH AEP P/N

GOLD 7342-1511-060

LEG FINISH AEP P/N

PRETINNED 7342-1511-061




SSMC Cable ConnectorsStraight Cable Plugs


.53

Hex 5/32 A. F..174

.70

Hex 5/32 A. F.

AEP P/N

7002-1572-0XX*

AEP P/N

7002-1542-0XX*

Straight Cable Jacks


.46

Hex 5/32 A. F..174

.63

Hex 5/32 A. F.

AEP P/N

7101-1571-0XX*

AEP P/N

7101-1541-0XX*



.430.352

.166.244

.322

.156 Cube

Hex 5/32 A. F.

.430.352

.174.252

.330

.156 Cube

Hex 5/32 A. F.

AEP P/N

7105-1521-0XX*

AEP P/N

7105-1561-0XX*


GROUP CABLE TYPES

02 RG178, RG196, M17/93, M17/169

03RG174, RG179, RG316, M17/113, M17/119, M17/172, M17/189

GROUP CABLE TYPES


GROUP CABLE TYPES


21 .056" semi-rigid





SSMC Cable ConnectorsRight Angle Cable Jacks


.166.244

.322

.384.306 .156 Cube

.384.306

.174.252

.330

.156 Cube

AEP P/N

7141-1521-0XX*

AEP P/N

7141-1561-0XX*

Straight Bulkhead Mounted Cable Jacks (.093" max panel thickness)Crimp type for flexible cable Solder type for semi-rigid cable

.19

Hex 5/32 A. F.

.360

.140 dia.§

.126§


Hex 3/16 A. F.

.174.37

Hex 5/32 A. F.

.360

.140 dia.§

.126§


Hex 3/16 A. F.

AEP P/N

7003-1572-0XX*

AEP P/N

7003-1542-0XX*

Right Angle Bulkhead Mounted Cable Jacks (.125" max panel thickness)Crimp type for flexible cable Solder type for semi-rigid cable

Hex 3/16 A. F.

.492.386

.570

.166.244

.322

.156 Cube


.140 dia.§

.126§

Hex 3/16 A. F.

.492.386

.570

.174.252

.330

.156 Cube


.140 dia.§

.126§

AEP P/N

7106-1521-0XX*

AEP P/N

7106-1561-0XX*


GROUP CABLE TYPES

02 RG178, RG196, M17/93, M17/169

03RG174, RG179, RG316, M17/113, M17/119, M17/172, M17/189

GROUP CABLE TYPES


GROUP CABLE TYPES


21 .056" semi-rigid





SSMC Bulkhead Mounted ReceptaclesStraight Bulkhead Jack Receptacles (.093" max panel thickness)

Rear mount Front mount

.260.51

.150.080

Hex 5/32 A. F. Hex 3/16 A. F.

.036 dia.

.020 dia.

.140 dia.§

.126§


.360.51

.150.080

Hex 5/32 A. F.Hex 3/16 A. F.

.036 dia..020 dia.

.140 dia.§

.126§


AEP P/N

7004-1512-000

AEP P/N

7119-1512-000

Straight Bulkhead Plug Receptacle

Front mount (.093"max panel thickness)

.57.28 .150

.080

Hex 3/16 A. F.

.036 dia.

.020 dia.

.180 dia. .140 dia.§

.126§

§ Recommendedmounting hole size,tolerance +.003, -.000Hex 5/32 A. F.

AEP P/N

7017-1512-000

Right Angle Bulkhead Receptacles (.093" max panel thickness)Jack type Plug type

.180 dia.

.430.352

.143

.080

Hex 3/16 A. F.

.036 dia.

.020 dia.

.227

.48

.150

.140 dia.§

.126§

.156 sq.


Hex 5/32 A. F.

.384.306

.143

.080

Hex 3/16 A. F.

.036 dia.

.020 dia.

.227

.48

.150

.140 dia.§

.126§

.156 sq.


AEP P/N

7012-1511-000

AEP P/N

7040-1511-000




SSMC P.C. Board ReceptaclesStraight P.C. Board Receptacles


.135

.419

.284

.100 (typ.)

.020 sq. (typ.)

.038 sq. (typ.)

.156 sq..026 dia.

.155

.419

.264.100 (typ.)

.020 sq. (typ.)

.156 sq.

.026 dia.


.155

.419

.264.020 (typ.)

.156 sq.

.026 dia.


.025

.289

.264.038 (typ.)

.080.156 sq.

.026 dia.



.161.245

.38

.135

.100 (typ.)

.156 sq..384

.306

.038 sq. (typ.)

.020 sq. (typ.)

.026 dia.

.384.306

.141.225

.38

.155.100 (typ.)

.020 sq. (typ.)

.156 sq.

.026 dia.

LEG FINISH AEP P/N

GOLD 7009-1511-000

LEG FINISH AEP P/N

PRETINNED 7009-1511-040

LEG FINISH AEP P/N

GOLD 7009-1511-050

LEG FINISH AEP P/N

PRETINNED 7009-1511-041

LEG FINISH AEP P/N

GOLD 7009-1511-004

LEG FINISH AEP P/N

GOLD 7010-1511-000

LEG FINISH AEP P/N

PRETINNED 7010-1511-040

LEG FINISH AEP P/N

GOLD 7010-1511-050

LEG FINISH AEP P/N

PRETINNED 7010-1511-041


.384.306

.141.225

.38

.155

.020 (typ.)

.156 sq.

.026 dia.


.163.247

.038 (typ.).080

.156 sq.

.026 dia..025

.384.306

LEG FINISH AEP P/N

GOLD 7010-1511-015

LEG FINISH AEP P/N

GOLD 7009-1511-005

LEG FINISH AEP P/N

PRETINNED 7009-1511-061

LEG FINISH AEP P/N

GOLD 7010-1511-060

LEG FINISH AEP P/N

PRETINNED 7010-1511-061




SSMC P.C. Board ReceptaclesStraight Bulkhead Mounted P.C. Board Receptacles (.125" max panel thickness)

Standard legs

Hex 3/16 A. F.

.140 dia.§

.126§

.155

.585.430

.386


.100 (typ.)

.020 sq. (typ.)

.156 sq.

.026 dia.

LEG FINISH AEP P/N

GOLD 7029-1511-000

PRETINNED 7029-1511-012

Standoff legs

Hex 3/16 A. F. .135

.585.450

.386.140 dia.§

.126§


.100 (typ.)

.020 sq. (typ.)

.038 sq. (typ.)

.156 sq..026 dia.

LEG FINISH AEP P/N

GOLD 7029-1511-050

PRETINNED 7029-1511-040

Surface mount

.455.386

Hex 3/16 A. F. .025

.140 dia.§

.126§


.038 (typ.)

.080.156 sq.

.026 dia.

LEG FINISH AEP P/N

GOLD 7029-1511-015

Edge mount

Hex 3/16 A. F.

.140 dia.§

.126§

.155

.585.430

.386


.020 (typ.)

.156 sq.

.026 dia.


LEG FINISH AEP P/N

GOLD 7029-1511-060

PRETINNED 7029-1511-061




SSMC P.C. Board ReceptaclesRight Angle Bulkhead Mounted P.C. Board Receptacles (.125" max panel thickness)

Standard legs

Hex 3/16 A. F.

.492.386

.570

.141.225

.38

.155§ Recommendedmounting hole size,tolerance +.003, -.000

.100 (typ.)

.020 sq. (typ.)

.156 sq.

.026 dia.

.140 dia.§

.126§


.161.245

.38

.135

.100 (typ.)

.156 sq.

.038 sq. (typ.)

.020 sq. (typ.)

.026 dia.Hex 3/16 A. F.

.492.386

.570

.140 dia.§

.126§

§ Recommendedmounting hole size, tolerance +.003, -.000

.163.247

.156 sq.

.025.038 (typ.)

.080.156 sq.

.026 dia.Hex 3/16 A. F.

.492.386

.570

.140 dia.§

.126§


.141.225

.38

.155

.020 (typ.)

.156 sq.

.026 dia.


Hex 3/16 A. F.

.492.386

.570

.140 dia.§

.126§

LEG FINISH AEP P/N

GOLD 7110-1511-000

PRETINNED 7110-1511-012

Standoff legs

LEG FINISH AEP P/N

GOLD 7110-1511-050

PRETINNED 7110-1511-040

Surface mount

LEG FINISH AEP P/N

GOLD 7110-1511-015

Edge mount

LEG FINISH AEP P/N

GOLD 7110-1511-060

PRETINNED 7110-1511-061




SSMC P.C. Board ReceptaclesStraight Plug Type P.C. Board Receptacles


.135

.472

.337

.100 (typ.)

.020 sq. (typ.)

.038 sq. (typ.)

.187 dia.

.026 dia.

Hex 5/32 A. F..155

.472

.317

.187 dia.

.100 (typ.)

.020 sq. (typ.)

.026 dia.Hex 5/32 A. F.


.187 dia.

.026 dia.

.020 (typ.)


.155

.472

.317Hex 5/32 A. F.

.342

.317

.187 dia.

.026 dia. .054 (typ.)

.080

.025

Hex 5/32 A. F.



.100 (typ.)

.156 sq.

.038 sq. (typ.)

.020 sq. (typ.)

.026 dia.

.161.245

.38

.135

.430.352

Hex 5/32 A. F.

.141.225

.38

.155

.430.352

.100 (typ.)

.020 sq. (typ.)

.156 sq.

.026 dia.

Hex 5/32 A. F.

LEG FINISH AEP P/N

GOLD 7025-1512-000

LEG FINISH AEP P/N

PRETINNED 7025-1512-012

LEG FINISH AEP P/N

GOLD 7025-1512-050

LEG FINISH AEP P/N

PRETINNED 7025-1512-040

LEG FINISH AEP P/N

GOLD 7025-1512-015

LEG FINISH AEP P/N

GOLD 7042-1511-000

LEG FINISH AEP P/N

PRETINNED 7042-1511-012

LEG FINISH AEP P/N

GOLD 7042-1511-050

LEG FINISH AEP P/N

PRETINNED 7042-1511-040


.141.225

.38

.155

.430.352 .020 (typ.)

.156 sq.

.026 dia.


Hex 5/32 A. F..163.247

.430.352

.025 .038 (typ.).080

.156 sq.

.026 dia.Hex 5/32 A. F.

LEG FINISH AEP P/N

GOLD 7042-1511-015

LEG FINISH AEP P/N

GOLD 7025-1512-060

LEG FINISH AEP P/N

PRETINNED 7025-1512-061

LEG FINISH AEP P/N

GOLD 7042-1511-060

LEG FINISH AEP P/N

PRETINNED 7042-1511-061




SSMC Receptacles and AdaptersStraight Panel Jack Receptacle (Stainless steel bodies)

4-hole flange 2-hole flange

.084 dia.

.035

.140

.067 dia. (typ.)

.362.232

.500

.375

.065

.125

.026 dia.

.017 dia.

.500

.375

.065

.125 .164 (typ.)

.067 dia. (typ.)

.281 sq.

.026 dia.

.017 dia.

AEP P/N

7198-1513-000

AEP P/N

7100-1513-000

Bulkhead Mounted Adapters

SSMC jack to SSMC jack SSMC jack to SSMB jack

.360.62

.200

Hex 5/32 A. F.

.140 dia.§

.126§


Hex 3/16 A. F.

.360.62

.220

Hex 5/32 A. F.

.140 dia.§

.126§


Hex 3/16 A. F.

AEP P/N

7122-1502-000

AEP P/N

7022-1502-000

Adapters Between Series

N plug to SSMC jack SMA plug to SSMC jack

.78

1.22

AEP P/N

5013-1503-000

AEP P/N

5938-1503-000




P.C. Board Cable TerminationsStraight P.C. Board Cable Terminations


.135

.45

.314

.100 (typ.)

.020 sq. (typ.)

.038 sq. (typ.)

.156 sq..026 dia.

.155

.45

.294.100 (typ.)

.020 sq. (typ.)

.156 sq.

.026 dia.

Edge mount

.155

.45

.294.020 (typ.)

.156 sq.

.026 dia.


Right Angle P.C. Board Cable Terminations


.161.245

.38

.135

.100 (typ.)

.156 sq..370

.292

.038 sq. (typ.)

.020 sq. (typ.)

.026 dia.

.370.292

.141.225

.38

.155

.100 (typ.).020 sq. (typ.)

.156 sq.

.026 dia.

LEG FINISH AEP P/N

GOLD 7146-1521-0XX

LEG FINISH AEP P/N

PRETINNED 7146-1521-1XX

LEG FINISH AEP P/N

GOLD 7146-1521-2XX

LEG FINISH AEP P/N


LEG FINISH AEP P/N

GOLD 7145-1521-0XX

LEG FINISH AEP P/N


LEG FINISH AEP P/N

GOLD 7145-1521-2XX

LEG FINISH AEP P/N



.370.292

.141.225

.38

.155

.020 (typ.)

.156 sq.

.026 dia.


.163.247

.038 (typ.).080

.156 sq.

.026 dia..025

.370.292

LEG FINISH AEP P/N

GOLD 7145-1521-6XX

LEG FINISH AEP P/N

GOLD 7146-1521-4XX


LEG FINISH AEP P/N

GOLD 7145-1521-4XX

LEG FINISH AEP P/N



GROUP CABLE TYPES

02 RG178, RG196, M17/93, M17/169

03RG174, RG179, RG316, M17/113, M17/119, M17/172, M17/189

GROUP CABLE TYPES


GROUP CABLE TYPES


21 .056" semi-rigid





Assembly Tooling

TA-0105

TA-0432

DESCRIPTION AEP P/N

Crimp tool with .105" and .128" hex dies TA-0105

DESCRIPTION AEP P/N

Torque wrench with 5/32" jaws for SSMC

plug coupling nuts and straight connector TA-0432

backnuts; 30 inch-ounces torque

DESCRIPTION AEP P/N

Capping tool (arbor press) with bases

for SSMB/SSMC/SSLB right angle cable CP-17

plugs and jacks

CP-17

Crimp Tool

Torque Wrench

Capping Tool

Cable assembly instructions are shipped with each cable connector.




Index by Part Number(Click on any line to jump to the page)

P / N P a g e5 0 1 1 - 1 5 0 3 - 0 0 0 . . . . . . . . . 1 45 0 1 3 - 1 5 0 3 - 0 0 0 . . . . . . . . . 2 75 9 3 7 - 1 5 0 3 - 0 0 0 . . . . . . . . . 1 45 9 3 8 - 1 5 0 3 - 0 0 0 . . . . . . . . . 2 77 0 0 2 - 1 5 4 2 - 0 X X * . . . . . . . . 2 07 0 0 2 - 1 5 7 2 - 0 X X * . . . . . . . . 2 07 0 0 3 - 1 5 4 2 - 0 X X * . . . . . . . . 2 17 0 0 3 - 1 5 7 2 - 0 X X * . . . . . . . . 2 17 0 0 4 - 1 5 1 2 - 0 0 0 . . . . . . . . . 2 27 0 0 9 - 1 5 1 1 - 0 0 0 . . . . . . . . . 2 37 0 0 9 - 1 5 1 1 - 0 0 4 . . . . . . . . . 2 37 0 0 9 - 1 5 1 1 - 0 0 5 . . . . . . . . . 2 37 0 0 9 - 1 5 1 1 - 0 4 0 . . . . . . . . . 2 37 0 0 9 - 1 5 1 1 - 0 4 1 . . . . . . . . . 2 37 0 0 9 - 1 5 1 1 - 0 5 0 . . . . . . . . . 2 37 0 0 9 - 1 5 1 1 - 0 6 1 . . . . . . . . . 2 37 0 1 0 - 1 5 1 1 - 0 0 0 . . . . . . . . . 2 37 0 1 0 - 1 5 1 1 - 0 1 5 . . . . . . . . . 2 37 0 1 0 - 1 5 1 1 - 0 4 0 . . . . . . . . . 2 37 0 1 0 - 1 5 1 1 - 0 4 1 . . . . . . . . . 2 37 0 1 0 - 1 5 1 1 - 0 5 0 . . . . . . . . . 2 37 0 1 0 - 1 5 1 1 - 0 6 0 . . . . . . . . . 2 37 0 1 0 - 1 5 1 1 - 0 6 1 . . . . . . . . . 2 37 0 1 2 - 1 5 1 1 - 0 0 0 . . . . . . . . . 2 27 0 1 7 - 1 5 1 2 - 0 0 0 . . . . . . . . . 2 27 0 2 2 - 1 5 0 2 - 0 0 0 . . . . . . 1 4 , 2 57 0 2 5 - 1 5 1 2 - 0 0 0 . . . . . . . . . 2 67 0 2 5 - 1 5 1 2 - 0 1 2 . . . . . . . . . 2 67 0 2 5 - 1 5 1 2 - 0 1 5 . . . . . . . . . 2 67 0 2 5 - 1 5 1 2 - 0 4 0 . . . . . . . . . 2 67 0 2 5 - 1 5 1 2 - 0 5 0 . . . . . . . . . 2 67 0 2 5 - 1 5 1 2 - 0 6 0 . . . . . . . . . 2 67 0 2 5 - 1 5 1 2 - 0 6 1 . . . . . . . . . 2 67 0 2 9 - 1 5 1 1 - 0 0 0 . . . . . . . . . 2 47 0 2 9 - 1 5 1 1 - 0 1 2 . . . . . . . . . 2 47 0 2 9 - 1 5 1 1 - 0 1 5 . . . . . . . . . 2 47 0 2 9 - 1 5 1 1 - 0 4 0 . . . . . . . . . 2 47 0 2 9 - 1 5 1 1 - 0 5 0 . . . . . . . . . 2 47 0 2 9 - 1 5 1 1 - 0 6 0 . . . . . . . . . 2 47 0 2 9 - 1 5 1 1 - 0 6 1 . . . . . . . . . 2 47 0 4 0 - 1 5 1 1 - 0 0 0 . . . . . . . . . 2 27 0 4 2 - 1 5 1 1 - 0 0 0 . . . . . . . . . 2 67 0 4 2 - 1 5 1 1 - 0 1 2 . . . . . . . . . 2 67 0 4 2 - 1 5 1 1 - 0 1 5 . . . . . . . . . 2 67 0 4 2 - 1 5 1 1 - 0 4 0 . . . . . . . . . 2 67 0 4 2 - 1 5 1 1 - 0 5 0 . . . . . . . . . 2 67 0 4 2 - 1 5 1 1 - 0 6 0 . . . . . . . . . 2 67 0 4 2 - 1 5 1 1 - 0 6 1 . . . . . . . . . 2 67 1 0 0 - 1 5 1 3 - 0 0 0 . . . . . . . . . 2 77 1 0 1 - 1 5 4 1 - 0 X X * . . . . . . . . 2 07 1 0 1 - 1 5 7 1 - 0 X X * . . . . . . . . 2 07 1 0 5 - 1 5 2 1 - 0 X X * . . . . . . . . 2 07 1 0 5 - 1 5 6 1 - 0 X X * . . . . . . . . 2 07 1 0 6 - 1 5 2 1 - 0 X X * . . . . . . . . 2 17 1 0 6 - 1 5 6 1 - 0 X X * . . . . . . . . 2 17 1 1 0 - 1 5 1 1 - 0 0 0 . . . . . . . . . 2 57 1 1 0 - 1 5 1 1 - 0 1 2 . . . . . . . . . 2 57 1 1 0 - 1 5 1 1 - 0 1 5 . . . . . . . . . 2 57 1 1 0 - 1 5 1 1 - 0 4 0 . . . . . . . . . 2 57 1 1 0 - 1 5 1 1 - 0 5 0 . . . . . . . . . 2 57 1 1 0 - 1 5 1 1 - 0 6 0 . . . . . . . . . 2 57 1 1 0 - 1 5 1 1 - 0 6 1 . . . . . . . . . 2 57 1 1 9 - 1 5 1 2 - 0 0 0 . . . . . . . . . 2 27 1 2 2 - 1 5 0 2 - 0 0 0 . . . . . . . . . 2 7

P / N P a g e7 1 4 1 - 1 5 2 1 - 0 X X * . . . . . . . . 2 17 1 4 1 - 1 5 6 1 - 0 X X * . . . . . . . . 2 17 1 4 5 - 1 5 2 1 - 0 X X . . . . . . . . 2 87 1 4 5 - 1 5 2 1 - 1 X X . . . . . . . . 2 87 1 4 5 - 1 5 2 1 - 2 X X . . . . . . . . 2 87 1 4 5 - 1 5 2 1 - 3 X X . . . . . . . . 2 87 1 4 5 - 1 5 2 1 - 4 X X . . . . . . . . 2 87 1 4 5 - 1 5 2 1 - 5 X X . . . . . . . . 2 87 1 4 5 - 1 5 2 1 - 6 X X . . . . . . . . 2 87 1 4 6 - 1 5 2 1 - 0 X X . . . . . . . . 2 87 1 4 6 - 1 5 2 1 - 1 X X . . . . . . . . 2 87 1 4 6 - 1 5 2 1 - 2 X X . . . . . . . . 2 87 1 4 6 - 1 5 2 1 - 3 X X . . . . . . . . 2 87 1 4 6 - 1 5 2 1 - 4 X X . . . . . . . . 2 87 1 4 6 - 1 5 2 1 - 5 X X . . . . . . . . 2 87 1 9 8 - 1 5 1 3 - 0 0 0 . . . . . . . . . 2 77 2 0 1 - 1 5 4 1 - 0 X X * . . . . . . . . 77 2 0 1 - 1 5 7 1 - 0 X X * . . . . . . . . 77 2 0 2 - 1 5 4 2 - 0 X X * . . . . . . . . 77 2 0 2 - 1 5 7 2 - 0 X X * . . . . . . . . 77 2 0 3 - 1 5 4 1 - 0 X X * . . . . . . . . 87 2 0 3 - 1 5 7 1 - 0 X X * . . . . . . . . 87 2 0 4 - 1 5 1 1 - 0 0 0 . . . . . . . . . . 97 2 0 9 - 1 5 1 1 - 0 0 0 . . . . . . . . . 1 07 2 0 9 - 1 5 1 1 - 0 1 1 . . . . . . . . . 1 07 2 0 9 - 1 5 1 1 - 0 1 2 . . . . . . . . . 1 07 2 0 9 - 1 5 1 1 - 0 1 5 . . . . . . . . . 1 07 2 0 9 - 1 5 1 1 - 0 2 3 . . . . . . . . . 1 07 2 0 9 - 1 5 1 1 - 0 4 0 . . . . . . . . . 1 07 2 0 9 - 1 5 1 1 - 0 6 1 . . . . . . . . . 1 07 2 1 0 - 1 5 1 1 - 0 0 0 . . . . . . . . . 1 07 2 1 0 - 1 5 1 1 - 0 1 2 . . . . . . . . . 1 07 2 1 0 - 1 5 1 1 - 0 1 5 . . . . . . . . . 1 07 2 1 0 - 1 5 1 1 - 0 4 0 . . . . . . . . . 1 07 2 1 0 - 1 5 1 1 - 0 5 0 . . . . . . . . . 1 07 2 1 0 - 1 5 1 1 - 0 6 0 . . . . . . . . . 1 07 2 1 0 - 1 5 1 1 - 0 6 1 . . . . . . . . . 1 07 2 1 2 - 1 5 1 1 - 0 0 0 . . . . . . . . . . 97 2 1 7 - 1 5 1 2 - 0 0 0 . . . . . . . . . . 97 2 1 9 - 1 5 1 1 - 0 0 0 . . . . . . . . . . 97 2 2 2 - 1 5 0 1 - 0 0 0 . . . . . . . . . 1 47 2 2 5 - 1 5 1 2 - 0 0 0 . . . . . . . . . 1 37 2 2 5 - 1 5 1 2 - 0 1 2 . . . . . . . . . 1 37 2 2 5 - 1 5 1 2 - 0 1 5 . . . . . . . . . 1 37 2 2 5 - 1 5 1 2 - 0 4 0 . . . . . . . . . 1 37 2 2 5 - 1 5 1 2 - 0 5 0 . . . . . . . . . 1 37 2 2 5 - 1 5 1 2 - 0 6 0 . . . . . . . . . 1 37 2 2 5 - 1 5 1 2 - 0 6 1 . . . . . . . . . 1 37 2 2 9 - 1 5 1 1 - 0 0 0 . . . . . . . . . 1 17 2 2 9 - 1 5 1 1 - 0 1 2 . . . . . . . . . 1 17 2 2 9 - 1 5 1 1 - 0 1 5 . . . . . . . . . 1 17 2 2 9 - 1 5 1 1 - 0 4 0 . . . . . . . . . 1 17 2 2 9 - 1 5 1 1 - 0 5 0 . . . . . . . . . 1 17 2 2 9 - 1 5 1 1 - 0 6 0 . . . . . . . . . 1 17 2 2 9 - 1 5 1 1 - 0 6 1 . . . . . . . . . 1 17 2 4 0 - 1 5 1 1 - 0 0 0 . . . . . . . . . . 97 2 4 2 - 1 5 1 1 - 0 0 0 . . . . . . . . . 1 37 2 4 2 - 1 5 1 1 - 0 1 2 . . . . . . . . . 1 37 2 4 2 - 1 5 1 1 - 0 1 5 . . . . . . . . . 1 37 2 4 2 - 1 5 1 1 - 0 4 0 . . . . . . . . . 1 37 2 4 2 - 1 5 1 1 - 0 5 0 . . . . . . . . . 1 37 2 4 2 - 1 5 1 1 - 0 6 0 . . . . . . . . . 1 37 2 4 2 - 1 5 1 1 - 0 6 1 . . . . . . . . . 1 37 3 0 2 - 1 5 4 2 - 0 X X * . . . . . . . . 1 5

P / N P a g e7 3 0 2 - 1 5 7 2 - 0 X X * . . . . . . . . 1 57 3 0 3 - 1 5 4 1 - 0 X X * . . . . . . . . 1 67 3 0 3 - 1 5 7 1 - 0 X X * . . . . . . . . 1 67 3 0 4 - 1 5 1 1 - 0 0 0 . . . . . . . . . 1 77 3 0 5 - 1 5 2 1 - 0 X X * . . . . . . . . 1 57 3 0 5 - 1 5 6 1 - 0 X X * . . . . . . . . 1 57 3 0 9 - 1 5 1 1 - 0 0 0 . . . . . . . . . 1 87 3 0 9 - 1 5 1 1 - 0 1 2 . . . . . . . . . 1 87 3 0 9 - 1 5 1 1 - 0 1 5 . . . . . . . . . 1 87 3 0 9 - 1 5 1 1 - 0 4 0 . . . . . . . . . 1 87 3 0 9 - 1 5 1 1 - 0 5 0 . . . . . . . . . 1 87 3 0 9 - 1 5 1 1 - 0 6 0 . . . . . . . . . 1 87 3 0 9 - 1 5 1 1 - 0 6 1 . . . . . . . . . 1 87 3 1 0 - 1 5 1 1 - 0 0 0 . . . . . . . . . 1 87 3 1 0 - 1 5 1 1 - 0 1 2 . . . . . . . . . 1 87 3 1 0 - 1 5 1 1 - 0 1 5 . . . . . . . . . 1 87 3 1 0 - 1 5 1 1 - 0 4 0 . . . . . . . . . 1 87 3 1 0 - 1 5 1 1 - 0 5 0 . . . . . . . . . 1 87 3 1 0 - 1 5 1 1 - 0 6 0 . . . . . . . . . 1 87 3 1 0 - 1 5 1 1 - 0 6 1 . . . . . . . . . 1 87 3 1 2 - 1 5 1 1 - 0 0 0 . . . . . . . . . 1 77 3 1 7 - 1 5 1 2 - 0 0 0 . . . . . . . . . 1 77 3 2 5 - 1 5 1 2 - 0 0 0 . . . . . . . . . 1 97 3 2 5 - 1 5 1 2 - 0 1 2 . . . . . . . . . 1 97 3 2 5 - 1 5 1 2 - 0 1 5 . . . . . . . . . 1 97 3 2 5 - 1 5 1 2 - 0 4 0 . . . . . . . . . 1 97 3 2 5 - 1 5 1 2 - 0 5 0 . . . . . . . . . 1 97 3 2 5 - 1 5 1 2 - 0 6 0 . . . . . . . . . 1 97 3 2 5 - 1 5 1 2 - 0 6 1 . . . . . . . . . 1 97 3 3 2 - 1 5 7 2 - 0 X X * . . . . . . . . 1 67 3 3 2 - 1 5 7 2 - 3 X X * . . . . . . . . 1 67 3 3 5 - 1 5 2 1 - 0 X X * . . . . . . . . 1 67 3 3 5 - 1 5 2 1 - 3 X X * . . . . . . . . 1 67 3 4 0 - 1 5 1 1 - 0 0 0 . . . . . . . . . 1 77 3 4 1 - 1 5 2 1 - 0 X X * . . . . . . . . 1 57 3 4 1 - 1 5 6 1 - 0 X X * . . . . . . . . 1 57 3 4 2 - 1 5 1 1 - 0 0 0 . . . . . . . . . 1 97 3 4 2 - 1 5 1 1 - 0 1 2 . . . . . . . . . 1 97 3 4 2 - 1 5 1 1 - 0 1 5 . . . . . . . . . 1 97 3 4 2 - 1 5 1 1 - 0 4 0 . . . . . . . . . 1 97 3 4 2 - 1 5 1 1 - 0 5 0 . . . . . . . . . 1 97 3 4 2 - 1 5 1 1 - 0 6 0 . . . . . . . . . 1 97 3 4 2 - 1 5 1 1 - 0 6 1 . . . . . . . . . 1 97 3 9 6 - 1 5 1 2 - 0 0 0 . . . . . . . . . 1 77 4 0 5 - 1 5 2 1 - 0 X X * . . . . . . . . 77 4 0 5 - 1 5 6 1 - 0 X X * . . . . . . . . 77 4 0 6 - 1 5 2 1 - 0 X X * . . . . . . . . 87 4 0 6 - 1 5 6 1 - 0 X X * . . . . . . . . 87 4 1 0 - 1 5 1 1 - 0 0 0 . . . . . . . . . 1 27 4 1 0 - 1 5 1 1 - 0 1 2 . . . . . . . . . 1 27 4 1 0 - 1 5 1 1 - 0 1 5 . . . . . . . . . 1 27 4 1 0 - 1 5 1 1 - 0 4 0 . . . . . . . . . 1 27 4 1 0 - 1 5 1 1 - 0 5 0 . . . . . . . . . 1 27 4 1 0 - 1 5 1 1 - 0 6 0 . . . . . . . . . 1 27 4 1 0 - 1 5 1 1 - 0 6 1 . . . . . . . . . 1 27 4 4 1 - 1 5 2 1 - 0 X X * . . . . . . . . 87 4 4 1 - 1 5 6 1 - 0 X X * . . . . . . . . 87 4 9 6 - 1 5 1 2 - 0 0 0 . . . . . . . . . . 97 4 9 8 - 1 5 1 3 - 0 0 0 . . . . . . . . . 1 47 4 9 9 - 1 5 1 3 - 0 0 0 . . . . . . . . . 1 4C P - 1 7 . . . . . . . . . . . . . . . 2 9TA - 0 1 0 5 . . . . . . . . . . . . . 2 9TA - 0 4 3 2 . . . . . . . . . . . . . 2 9

* Indicates cable connectors with various types on specified page.


Cata

log

# 12

7-7p

df R

ev.2

8/0

5

About AEPSince our foundation in 1973, our goal has been to tailor our equipment and processes toward satisfying customer and market demand, no matter how circumstances change. To that end, our modern plant, with recent expansion, provides vertically-integrated machining, assembly, and testing to ensure the product quality and on-time delivery that have always been our hallmark. “Continuous Improvement Equals Customer Satisfaction” is not just a slogan; we believe it’s the best and only way to do business.

Other AEP ProductsThe connectors in this brochure are only part of our complete line of coaxial connectors and cable assemblies, including: • SMA • SMB • SMC • SMP • SSMA • SLB (Slide-on version of SMB) • MCX • MMCX • 75Ω Miniature SMB • 75Ω Snap-on mating • 75Ω Screw-on mating • Adapters within and between series • Waterproof connectors• Flexible cable assemblies • Semi-rigid cable assemblies • And over 100 styles of MIL-PRF-39012 QPL connectors

in series SMA, SMB, and SMC.

APPLIED ENGINEERING PRODUCTS104 John W. Murphy Drive • P.O. Box 510 • New Haven, CT 06513

(203) 776-2813 • FAX (203) 776-8294 • www.aep.us • e-mail: [email protected] 31

Documents

DIGITAL CATALOG Microminiature Coaxial Connectors SSMB-SSLB-SSMC 127-7.pdfassemblies using SSMB, SSLB, and SSMC connectors. With experience in producing thousands of microminiature