Upload
others
View
6
Download
0
Embed Size (px)
Citation preview
16/10/2015 V4.01
Features:> High brightness surface mount LED.> Based on InGaN technology.> 120° viewing angle.> Small package outline (LxWxH) of 3.2 x 2.8 x 1.8mm.> Qualified according to JEDEC moisture sensitivity Level 2.> Compatible to IR reflow soldering.> Environmental friendly; RoHS compliance.> Compliance to automotive standard; AEC-Q101.
DomiLEDTM
With the intense colors that seem to glow with energy and its significant brightness, DomiLEDTM white LED is a highly reliable design device. Its dynamic nature makes it perfect choice for lighthing applications, office and home applications and standard industrial applications.
DATA SHEET:
DomiLEDTM
InGaN White : DDW-CJG-I1
© 2005 DomiLED is a trademark of DOMINANT Opto Technologies.All rights reserved. Product specifications are subject to change without notice.
Applications:> Automotive: interior applications, eg: switches, telematics, climate control system, dashboard, etc.> Consumer appliances: LCD illumination as in PDAs, LCD TV.> Communication: mobile phone flash light, backlights in mobile phone display.> Display: full color display video notice board.> Industry: general lighting
DOMINANTOpto TechnologiesInnovating Illumination
TM
16/10/2015 V4.02
InGaN White: DDW-CJG-I1
Part OrderingNumber
Color ViewingAngle˚
Luminous Intensity @ 10mA IV (mcd)
NOTE1. All part number above comes in a quantity of 2000 units per reel.2. Luminous intensity is measured with an accuracy of ± 11%.3. Wavelength binning is carried for all units as per the wavelength-binning table. Only one wavelength group is allowed for each reel.
DDW-CJG-QR2-1-I1 White 120 112.5
Vr @ Ir = 10 µA
Electrical Characteristics at Ta=250CVf @ If =10 mA
3.2 5.0
Forward Voltage, Vf is measured with an accuracy of ± 0.1 V.
Part NumberMin. (V) Typ. (V) Max. (V) Min. (V)
DDW-CJG 2.7 3.8
Unit
Absolute Maximum RatingsMaximum Value
DC forward current
Peak pulse current; (tp ≤ 10µs, Duty cycle = 0.005)
Reverse voltage
ESD threshold (HBM)
LED junction temperature
Operating temperature
Storage temperature
Power dissipation (at room temperature)
Thermal resistance- Junction / ambient, Rth JA- Junction / solder point, Rth JS(Mounting on FR4 PCB, pad size >= 16 mm2 per pad)
20
200
5
2000
125
-40 … +100
-40 … +100
85
340180
mA
mA
V
V
˚C
˚C
˚C
mW
K/WK/W
DOMINANTOpto TechnologiesInnovating Illumination
TM
Optical Characteristics at Tj=250C
Min. Typ. Max.
71.5 180.0
16/10/2015 V4.03
InGaN White: DDW-CJG-I1DOMINANTOpto TechnologiesInnovating Illumination
TM
CharacteristicsSymbol Part Number Value Unit
Temperature coefficient of VF (typ)IF = 10mA; 0 ˚C <= T <= 100˚C
Temperature coefficient of IV (typ)IF = 10mA; 0 ˚C <= T <= 100 ˚C
Temperature coefficient of Cx (typ)IF = 10mA; 0 ˚C <= T <= 100 ˚C
Temperature coefficient of Cy (typ)IF = 10mA; 0 ˚C <= T <= 100 ˚C
TCV
TCIV
TCCx
TCCy
DDW-CJG
DDW-CJG
DDW-CJG
DDW-CJG
-5.2
-0.19
-0.0002
0.00006
mV / K
% / K
InGaN White: DDW-CJG-I1
16/10/2015 V4.04
DOMINANTOpto TechnologiesInnovating Illumination
TM
DDW, White Color Grouping
Dominant White Bin Structure1 2 3 4 1JK Cx 0.2960 0.2910 0.3005 0.3045 0.2960
Cy 0.2590 0.2680 0.2825 0.2715 0.2590JL Cx 0.291 0.2850 0.2960 0.3005 0.291
Cy 0.2680 0.2790 0.2955 0.2825 0.2680KK Cx 0.3045 0.3005 0.3100 0.3130 0.3045
Cy 0.2715 0.2825 0.2970 0.2840 0.2715KL Cx 0.3005 0.2960 0.3070 0.3100 0.3005
Cy 0.2825 0.2955 0.3120 0.2970 0.2825NK Cx 0.3288 0.3288 0.3386 0.3386 0.3288
Cy 0.3081 0.3282 0.3426 0.3235 0.3081NL Cx 0.3288 0.3288 0.3386 0.3386 0.3288
Cy 0.3282 0.3453 0.3591 0.3426 0.3282OK Cx 0.3386 0.3386 0.3484 0.3484 0.3386
Cy 0.3235 0.3426 0.3571 0.3388 0.3235OL Cx 0.3386 0.3386 0.3484 0.3484 0.3386
Cy 0.3426 0.3591 0.3730 0.3571 0.3426LK Cx 0.3100 0.3197 0.3205 0.3130 0.3100
Cy 0.2970 0.3131 0.2956 0.2840 0.2970LL Cx 0.3070 0.3189 0.3197 0.3100 0.3070
Cy 0.3120 0.3302 0.3131 0.2970 0.3120MK Cx 0.3197 0.3288 0.3288 0.3205 0.3197
Cy 0.3131 0.3282 0.3081 0.2956 0.3131ML Cx 0.3189 0.3288 0.3288 0.3197 0.3189
Cy 0.3302 0.3452 0.3282 0.3131 0.3302PK Cx 0.3484 0.3484 0.3582 0.3582 0.3484
Cy 0.3388 0.3571 0.3715 0.3542 0.3388PL Cx 0.3484 0.3484 0.3582 0.3582 0.3484
Cy 0.3571 0.3730 0.3792 0.3715 0.3571
0.2300
0.2400
0.2500
0.2600
0.2700
0.2800
0.2900
0.3000
0.3100
0.3200
0.3300
0.3400
0.3500
0.3600
0.3700
0.3800
0.3900
0.2700 0.2800 0.2900 0.3000 0.3100 0.3200 0.3300 0.3400 0.3500 0.3600 0.3700
JL
JK
KL
KK
LL
LK
NK
NL
OL
ML
PL
PK
OK
MK
Bin0.29600.25900.291
0.26800.30450.27150.30050.28250.32880.30810.32880.32820.33860.32350.33860.34260.31000.29700.30700.31200.31970.31310.31890.33020.34840.33880.34840.3571
CxCyCxCyCxCyCxCyCxCyCxCyCxCyCxCyCxCyCxCyCxCyCxCyCxCyCxCy
0.29100.26800.28500.27900.30050.28250.29600.29550.32880.32820.32880.34530.33860.34260.33860.35910.31970.31310.31890.33020.32880.32820.32880.34520.34840.35710.34840.3730
0.30050.28250.29600.29550.31000.29700.30700.31200.33860.34260.33860.35910.34840.35710.34840.37300.32050.29560.31970.31310.32880.30810.32880.32820.35820.37150.35820.3792
0.30450.27150.30050.28250.31300.28400.31000.29700.33860.32350.33860.34260.34840.33880.34840.35710.31300.28400.31000.29700.32050.29560.31970.31310.35820.35420.35820.3715
1 2 3 4
JK
JL
KK
KL
NK
NL
OK
OL
LK
LL
MK
ML
PK
PL
Dominant color coordinate is measured with an accuracy of ± 0.01.
Chromaticity coordinate groups are measured with an accuracy of ± 0.01.
16/10/2015 V4.05
InGaN White: DDW-CJG-I1DOMINANTOpto TechnologiesInnovating Illumination
TM
Q1Q2R1R2
71.5 ... 90.090.0 ... 112.5
112.5 ... 140.0140.0 ... 180.0
Brightness Group Luminous Intensity (mcd)
Luminous Intensity Group at Tj=25˚C
Luminous intensity is measured with an accuracy of ± 11%.
Forward Voltage (V)
Vf Bining (Optional)Vf Bin @ 10 mA
0A
00
01
02
03
2.45 ... 2.75
2.75 ... 3.05
3.05 ... 3.35
3.35 ... 3.65
3.65 ... 3.95
Forward Voltage, Vf is measured with an accuracy of ± 0.1 V. Please consult sales and marketing for special part number to incorporate Vf bining.
16/10/2015 V4.06
InGaN White: DDW-CJG-I1
Relative Luminous Intensity Vs Forward Current
Forward Current, mA
Rel
ativ
e In
tens
ity
0 10 20 30 40 50
0
0.4
0.8
1.2
1.6
2
2.4
Forward Current Vs Forward Voltage
Forward Voltage, V
Forw
ard
Cur
rent
, mA
2 2.5 3 3.5 4
0
10
20
30
40
50
Maximum Current Vs Ambient Temperature
Ambient temperature
Forw
ard
Cur
rent
, If
0 10 20 30 40 50 60 70 80 90 100
5
10
15
20
25
Relative Intensity Vs. Wavelength
Wavelength, nm
Rel
ativ
e In
tens
ity
400 450 500 550 600 650 700 750 800
0
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1
DOMINANTOpto TechnologiesInnovating Illumination
TM
Rel
ativ
e In
tens
ity; N
orm
aliz
ed a
t 20m
ARelative Intensity Vs Forward Current
Forward Current; mA
Rel
ativ
e In
tens
ity; N
orm
aliz
ed a
t 10m
A
0 5 10 15 20 25 30 35 40 45 50
0
0.5
1
1.5
2
2.5
3
3.5
4
4.5
Forward Current Vs Forward Voltage
Forward Voltage, V
Forw
ard
Cur
rent
; mA
2 2.5 3 3.5 4
0
10
20
30
40
50
Maximum Current Vs Ambient Temperature
Ambient Temperature
Forw
ard
Cur
rent
; mA
0 10 20 30 40 50 60 70 80 90 100
5
10
15
20
25
Relative Intensity Vs Wavelength
Wavelength; nm
Rel
ativ
e In
tens
ity
400 450 500 550 600 650 700 750 800
0
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1
Allowable Forward Current Vs Duty Ratio ( Ta=25 Deg C, tp≤10uS )
Allo
wab
le F
orw
ard
Cur
rent
( m
A )
Duty Ratio, %
Chromaticity Coordinate Shift
ΔC
X ,
Δ C
Y
DDW-CJG-RS2-A
≤
10
100
1000
0.1 1 10 100
All
ow
ab
le F
orw
ard
Cu
rre
nt
( m
A )
Duty Ratio, %
Allowable Forward Current Vs Duty Ratio ( Ta=25 Deg C, tp 10uS )
Forward Current, mA
0.0000
0.0100
0.0200
0.0300
0.0400
C X,
C Y
Chromaticity Coordinate Shift
Delta CX
Delta CYCy
-0.0400
-0.0300
-0.0200
-0.0100
0 5 10 15 20
Forward current (mA)
Cx
Radiation Pattern
0.270°
90°
80°
0
60°
50°
40°
30° 20°
0.6
0.4
1.0
0.8
10° 0°
16/10/2015 V4.07
InGaN White: DDW-CJG-I1DOMINANTOpto TechnologiesInnovating Illumination
TM
InGaN White: DDW-CJG-I1
16/10/2015 V4.08
DomiLEDTM • InGaN White: DDW-CJG-I1 Package Outlines
DOMINANTOpto TechnologiesInnovating Illumination
TM
Note: Package is Pb-free.
Materials
Lead Frame
Housing
Encapsulant
Lead-finishing
Materials
Copper alloy
High temperature resistant plastic, PPA
Silicone resin
Pure tin plating, Sn
16/10/2015 V4.09
InGaN White: DDW-CJG-I1
Recommended Solder Pad
DOMINANTOpto TechnologiesInnovating Illumination
TM
16/10/2015 V4.010
Taping and orientation
• Reels come in quantity of 2000 units.• Reel diameter is 180 mm.
InGaN White: DDW-CJG-I1DOMINANTOpto TechnologiesInnovating Illumination
TM
16/10/2015 V4.011
Packaging Specification
InGaN White: DDW-CJG-I1DOMINANTOpto TechnologiesInnovating Illumination
TM
16/10/2015 V4.012
InGaN White: DDW-CJG-I1DOMINANTOpto TechnologiesInnovating Illumination
TM
Packaging Specification
Average 1pc DomiLED/Multi DomiLED 1 completed bag (2000pcs)
0.034 190 ± 10Weight (gram)
CardboardBox
Dimensions (mm) Empty BoxWeight (kg)
Super Small
Small
Medium
Large
For DomiLEDTM
Reel / BoxCardboard BoxSize
Weight (gram) 0.034 240 ± 10
DOMINANT TM
Moisture sensitivity level
Moisture absorbent material +Moisture indicator
The reel, moisture absorbent material and moisture indicator aresealed inside the moisture proof foil bag
Reel
Barcode label
Label
(L) Lot No : lotno
(P) Part No : partno
(C) Cust No : partno
(G) Grouping : group
(Q) Quantity : quantity
(D) D/C : date code
(S) S/N : serial no
DOMINANT Opto TechnologiesML TEMP2 260˚CRoHS Compliant
Made in Malaysia
DOMINANT Opto Technologies DRND-008
Issue No : 1 Page 1 of 3
Product & Process Change Notice (PCN)
PCN No: D140157 Date: 21-Nov -2014
1. Describe present process / product:
All SMD LEDs that are currently shipped in the reel form. Please refer to section 3 for
the details; comparing current packing and label specification versus change proposed.
2. Product type affected:
All SMD LEDs that are currently shipped in the reel form.
3. Describe changes (to be):
Existing barcode printed label (BPL) used is as shown below.
Existing BPL size - 87mm x 45mm. As part of improvement and also in response to customers’ request; BPL format will be
changed to the following.
New BPL size - 110mm x 55mm. Additional information are now included in the label. 2D and 3D barcode data are
implemented now for every data field.
325 x 225 x 190
325 x 225 x 280
570 x 440 x 230
570 x 440 x 460
0.38
0.54
1.46
1.92
9 reels MAX
15 reels MAX
60 reels MAX
120 reels MAX
16/10/2015 V4.013
Time (sec)0 50 100 150 200
300
250
225
200
175
150
125
100
75
50
25
275
Tem
pera
ture
(˚C
)Classification Reflow Profile (JEDEC J-STD-020C)
Ramp-up3˚C/sec max.
255-260˚C10-30s
60-150s
Ramp-down
6˚C/secmax.
Preheat 60-180s
480s max
217˚C
Recommended Pb-free Soldering Profile
InGaN White: DDW-CJG-I1DOMINANTOpto TechnologiesInnovating Illumination
TM
Revision History
Page
-
2
3, 6
1, 12
Subjects
Initial release
Add Thermal Resistance
Add CharacteristicsAdd graph: Allowable Forward Current Vs Duty Ratio
Add graph: Chromaticity Coordinate Shift
Add FeaturesUpdate Packaging Specification
Date of Modification
01 Mar 2012
02 Apr 2013
06 Jun 2014
16 Oct 2015
InGaN White: DDW-CJG-I1
16/10/2015 V4.014
DOMINANTOpto TechnologiesInnovating Illumination
TM
NOTE
All the information contained in this document is considered to be reliable at the time of publishing. However, DOMINANT
Opto Technologies does not assume any liability arising out of the application or use of any product described herein.
DOMINANT Opto Technologies reserves the right to make changes to any products in order to improve reliability, function
or design.
DOMINANT Opto Technologies products are not authorized for use as critical components in life support devices or systems
without the express written approval from the Managing Director of DOMINANT Opto Technologies.
InGaN White: DDW-CJG-I1
About Us
DOMINANTOpto TechnologiesInnovating Illumination
TM
DOMINANT Opto Technologies is a dynamic Malaysian Corporation that is among the world’s leading SMT LED Manufacturers. An excellence – driven organization, it offers a comprehensive product range for diverse industries and applications. Featuring an internationally certifi ed quality assurance acclaim, DOMINANT’s extra bright LEDs are perfectly suited for various lighting applications in the automotive, consumer and communications as well as industrial sectors. With extensive industry experience and relentless pursuit of innovation, DOMINANT’s state-of-art manufacturing, research and testing capabilities have become a trusted and reliable brand across the globe. More information about DOMINANT Opto Technologies can be found on the Internet at http://www.dominant-semi.com.
DOMINANTOpto TechnologiesInnovating Illumination
TM
Please contact us for more information:
DOMINANT Opto Technologies Sdn. BhdLot 6, Batu Berendam, FTZ Phase III, 75350 Melaka, Malaysia.Tel: +606 283 3566 Fax: +606 283 0566E-mail: [email protected]