Page 1

SAJID AKRAM ELECTRICAL ENGINEER

SHORT INTRODUCTION

Qualification: B.sc Electrical Engineering (Power) 2012 Contact: 00971 56 1103620 Driving License: UAE valid License Email: saajid.ghuman@gmail.com

CAREER SUMMERY/OBJECTIVE/ACHIEVEMENTS

Currently working as a Project Engineer Electrical in ADNOC health Club and Ghantoot 40 Villas project in MBZ ABU DHABI UAE. A Practical, Knowledgeable and Competent Electrical Engineer, with team and project management skills; Experience of 4 years in working with Onshore Offshore projects, New build Premises, Specification of building services, Steel structure Buildings, LV power distribution, Electrical services for Mechanical Plant, cable management, lighting schemes and ELV Systems (Tel&Data, SMATV, Public Address).

Objective is to work in an exciting and professional environment of the organization with personal development and growth possibilities and to achieve company’s goal through professional ethics, sincere commitment and hard work. Seeking challenging and Mid-level managerial assignments with reputed organizations, preferably with Construction industry as Project Engineer- Electrical. Achievements:

1. Procurement Engineer at Zakher Marine Rig Nabors 867 Realm 1 Accommodation Jack up Barge Building as per American Bureau of shipping.

2. Successfully completed ADMA –OPCO Drillers camp Accommodation SARB 3 Project with in its time span as an Electrical Site Manager.

3. ADNOC certified engineer as an Electrical Engineer.

KEY SKILLS: Project Management, Project Planning, Project control, Project coordination, Electrical Designing, Load Flow Analysis and testing commissioning.

WORK EXPERIENCE

MAY 2013 to Present Electrical Engineer ACME Groups ABU DHABI UAE

Duties and Responsibilities:

Page 2

1. Design and layout electrical system as per RSB Electricity Wiring Regulations. 2. Responsible for the preparation of design, tender packages, bill of quantities, scope of

works, general concept, and specifications.

3. Preparation of load schedule, spread sheets and single line diagram (SLD). Transformer sizing, voltage drop calculations, Cable sizing, Switchgear sizing, MCC Panel sizing, Lighting and power layouts and designing of utility corridors.

4. Routing of cables on drawings and preparation for the routing of cable trays, Preparation of cable Schedule and made co-ordination drawings with HVAC, FF and Public Health system to avoid any clash at site.

5. Design and layout of auxiliary services such as Telecom, Fire alarm, MATV, Earthing and lightning protection system.

6. Installation/testing of ATS Panels, MV/LV panels, MDBs, Feeder Pillars, station DBs, Pkg sub stations, TRM/QRM, VMS, and transformers including parallel operation of transformers.

7. Leading sub team of Supervisors at site and AutoCAD draftsman for As Built and Co-ordination drawings at any stage of project.

8. Quantity take off for all major items of Electrical and Low current system as per Initial stage drawings and tender drawings by Reviewing of Electrical Specification, Drawings and other contract documents.

9. Raise RFQ’s for all Electrical Items and evaluation of supplier Quotations, Quote comparatives and attending meetings with supplier to discuss the specifications price basis, compliance and price negotiations.

10. Interactions with Client representatives, Consultants, Contractors during technical reviews, project reviews and progress meetings.

11. Overall responsible for coordination with other disciplines and authorities like ADDC, and Etisalat for LDN, drawing approvals and site inspections.

Proven Job Roles:

PROJECT ENGINEER CURRENT PROJECT: (ADNOC KHALIDIYA COMPUND HEALTH CLUB AND RESTAURANT) CLIENT: ABU DHABI NATIONAL OIL COMPANY CONSULTANT: HILL INTERNATIONAL MAIN CONT. HOUSING SERVICES ABU DHABI UAE PROJECT VALUE: 6 MILLION

Responsibilities: 1. All electrical design for electrical system in kitchen, health club and other utilities.

2. Arrange all submittals for electrical systems and made approval for these systems.

3. Attend kick off meetings with client and subcontractors.

4. Made builders work drawings and get approval from ADNOC.

PROJECT ENGINEER: EMIRATES INTERNATIONAL STEEL FACTORY ICAD II

CLIENT: EMIRATES INTL. STEEL FACTORY ICAD II CONSULTANT: AL MAYER CONSULTANCY ESTIDAMA CONSULTANT: GREEN CONSULTING PROJECT VALUE: 10 MILLION

Responsibilities: 1. Complete all design as per estidama requirements following pearl 1 rating of estidama. 2. Arrange all material submittals as per estidama requirements. 3. Got LDN approval and shop drawings as per client requirement.

Page 3

4. All project execution work for workshop and office block.

Electrical Site Engineer: (SARB 3 ARTIFICIAL ISLAND DRILLERS CAMP ACCOMODATION AND ASSOCIATED UTILITIES AT SARB ISLAND.) Client: ADMA-OPCO ABU DHABI UAE CONSULTANT: DORSCH GRUPPE ABU DHABI UAE Main Cont.: HLG ABU DHABI UAE PROJECT VVALUE: 60 MILLION AED

Responsibilities:

1. Work in Designing field for Electrical drawings to check load schedule, single line diagram,

voltage drop calculations, Cable sizing, Switchgear sizing and Light & power layouts.

2. Made the BOQ of all material including cable tray, sockets, isolators, Glands, switch gear and

Low current material.

3. Arrange meetings between consultant and Thorn Gulf lighting supplier for the correct

selection of all light fittings as per ADMA-OPCO standard specifications and LUX level

calculation submissions.

4. On site made inspection of Electrical Cables by Magger testing, Installation of MDB’s,

SMDB’s, Multiple Cable Transits their dressings checked and approved by Consultant and

Client.

5. Conduct site inspections for executed work and materials with QA/QC inspectors, prepares

snag list /punch list and supervise implementation for conformance.

6. Project monitoring works, determining whether electrical installation activity is on-time and

provide solution for expediting.

7. Oversee and coordinate electrical and extra low voltage systems’ work consisting of

Structured Cabling System, PAGA system and SMATV system.

8. Develop technical submittals, Start-up Procedure and Operations and Maintenance Manual

and submit them to client/consultant for approval as deemed required.

Electrical Engineer: Command of Military Works :( Zayed Military City Armor School Tank Shelter Building) CLIENT: COMMAND OF MILITARY WORKS MAIN CONT. (AIMS GENERAL CONT.) PROJECT VALUE: 6 MILLION

Responsibilities: 1. Initially made approval of all materials as per Tender specifications for items like Light

fittings , AV system, DC system, SMATV system, Switch Gear, Power Cables and Shop Drawings as per standard rules and regulations.

2. Submit Method statements for all works like conduiting, power cable termination at SS, fire alarm testing and commissioning and Electrical light and power works.

3. Made inspections at site by consultant gradually for all works and submit RFI’s for every step of work to increase co-ordination between consultant and us.

4. Deal with Low current Sub contractors Silica and Sibca made supervision of Tel& Data, SMATV, LCP panel and Motion sensor work.

5. Deal with all suppliers of each item and made meetings with them to get specified material within minimum cost level.

6. Successfully handed over project to authorities and made testing of all disciplines in the presence of client commander.

JUNE 12 TO MARCH 2013 Electrical Engineer

Page 4

Heavy Electrical Complex Pakistan

1. Prepares material take-off, bill of quantities, budgetary and cost estimates. 2. Detailed review of design, and preparation of BOQ upon requirement. 3. Worked at site for cable laying and witness all methods of lying and cable jointing. 4. Excavation and backfilling of cable trenches (multi depths) trial trenches to

determine the underground services including reinstatement of asphalt, interlocking tiles, green, made - unmade areas.

5. Supervise laying of 11KV, Medium voltage cable and low voltage cables up to specified destination.

6. Supervision of work progress at site and submitting weekly progress report to project managers including provision of logistic support.

7. Attended kick-off meetings and compile all results. 8. Interested in 11 Kv, 33 Kv and HV work and have knowledge too.

LANDMARK PROJECTS HANDLED

1. SAFE WATER CHEMICALS ICAD 1 OFFICE STAFF BUILDING. (Deal with ADDC and Etisalat for drawing approval inspection and Installation of all electrical works.)

2. Office building and Shad building At Mussafah 40. (Deal with ADDC and Etisalat for drawing approval inspection and Installation of all electrical works.)

3. Yas Mall Electrical Fit out work for total 7 shops. (Sugoi Restaurant with Apple interior Décor , Gstar, Conves and ETC )

4. Abu Dhabi International Airport Communication rooms at terminal 3(All submittals, Installation, commissioning and final handing over to ADAC)

Technical Electrical Skills:

1. 11KV and 33KV Switchgears 2. Motor starting circuits (Reactors, Star delta, DOL, Reverse Forward) 3. Motor protection and overload settings 4. Power factor correction 5. Short circuit analysis 6. Vacuum circuit Breakers, breakers, Fuses

ADDITIONAL INFORMATION Professional Trainings: Project Management. (Pakistan Engineering Congress) Auto CAD Electrical. (Pakistan Industrial Technical Assistance Centre, Lahore) Programmable Logic Controllers (TEVTA) Emergency Response Training by RESCUE 1122. (Nestle Pakistan LTD.) Others Skills: Technical Report Writing. Effective presentation. Excellent interpersonal and communication skills. Efficient in group working and excellent as a group leader.

References: Will be provided at demand.