Equipment Selection Guide

UC June 11max.indd2011 A
B
AUGER BORING Company Model Type Drive Weight Boring Size Pit Total (lbs) Diam. (ft) Thrust (in) (lbs) American 24/30-150 mechanical 4,300 4-30 10 x 32 150,000 Augers 36-42-440 NG mechanical 8,400 12-42 13 x 33 440,000 36-600 NG mechanical 10,900 12-42 13 x 33 600,000 42-600 NG mechanical 10,900 12-48 13 x 33 600,000 48-54-900 NG mechanical 13,400 24-54 13 x 35 900,000 60-1200 NG mechanical 22,500 24-60 14 x 35 1,200,000 72-1200 NG mechanical 26,000 24-72 15.5 x 35 1,200,000 84/96-1800 NG mechanical 34,000 24-84 16 x 36 1,800,000
Barbco H-24 hydraulic 1,800* 4-24 5 x 17 100,000 24-100 mechanical 2,850* 4-24 5 x 32 113,000 24/30-150 mechanical 4,900** 4-30 8 x 34 176,715 30/36-200 mechanical 5,573** 4-36 8 x 34 226,000 36/48-350 mechanical 9,520** 12-48 12 x 34 402,128 36/48-500 mechanical 10,270** 12-48 12 x 34 580,000 36/48-900 mechanical 10,770** 12-48 13 x 34 900,000 48/60-750 mechanical 14,010** 12-60 13 x 34 874,628 48/60-1200 mechanical 14,760** 12-60 14 x 35 1,200,000 60/72-1MHD mechanical 21,400** 12-72 14 x 35 1,166,171 60/75-1500 mechanical 22,500** 12-72 14 x 35 1,500,000 72/84-1800 mechanical 24,000** 12-84 14 x 35 1,800,000 72/84-2.6MMHD mechanical 42,000 24-96 14 x 35 2,623,864 *includes master track; **machine splits for lighter lifts (master track not included)
Bor-It Mfg. 12H* hydraulic 960 2-12 3 x 9 30,000 20D* mechanical 2,200 4-20 4 x 28 51,500 24** mechanical 4,200 8-24 6 x 31 100,000 30** mechanical 6,500 12-30 7 x 31 200,000 36** mechanical 7,800 12-36 8 x 31 300,000 42** mechanical 14,000 12-42 10 x 35 500,000 48** mechanical 19,000 24-48 10 x 35 753,000 54** mechanical 23,000 24-54 10 x 35 1,000,000 60** mechanical 23,800 24-60 10 x 35 1,200,000 *includes master track; **machine splits for lighter lifts (master track not included)
McLaughlin CBM 48 mechanical 17,000 48 N/A 60,000 McL-12H hydraulic 480 4-12 7 24,500 McL20B mechanical 1,596 4-20 32 42,000 McL-24B mechanical 3,325 4-24 32 115,000 McL-30/36B mechanical 5,960 10-36 32 230,000 McL-36/42C mechanical 7,400 12-42 34 400,000 McL-42HD mechanical 17,250 12-42 34 634,000 McL-48/54 mechanical 28,175 12-60 34 950,000 McL-54/60 mechanical 21,550 16-60 35 950,000 CBM = cradle boring machine
SiteTec SPB80 hydr/rack & pinion 9,920* 4-31.5 6 x 12* 275,580 SPB130 hydr/rack & pinion 12-51 *Master track only, extension frames not included
The Robbins ABM 36-630 mechanical 20,000* 12-36 12 x 35 630,000 Company ABM 48-950 mechanical 23,000* 12-48 12 x 35 950,000 AMB 60-1270 mechanical 35,000* 24-60 16 x 38 1,270,000 ABM 72-1500 mechanical 45,000* 24-72 16 x 38 1,500,000 *machine splits for lighter lifts (master track not included)
BORING - HARD ROCK ATTACHMENTS Company Model Casing Hex No. Cutter Torque Thrust Range Diameter Size Cutters Size (ft/lbs) (lbs) American 24RH 24 4 9 6 1/2” 7,800 94,995 Augers 30RH 30 4 11 6 1/2” 11,900 116,105 36RH 36 4 13 6 1/2” 16,900 137,215 42RH 42 5 16 6 1/2” 25,800 168,880 48RH 48 5 19 6 1/2” 32,900 200,545
The Robbins SBUA-24 24 3 (4” opt) 9 6 1/2” 5,800/7,800 45,000/90,000 Company SBUA-30 30 4 9 6 1/2” 5,800/7,800 45,000/90,000 SBUA-36 36 4 13 6 1/2”, 9 1/2” 12,600/16,900 65,000/130,000 SBUA-42 42 4 16 6 1/2”, 9 1/2” 19,300/25,800 85,000/170,000 SBUA-48 48 5 (4” opt) 19 6 1/2”, 9 1/2”, 11 1/2” 24,600/32,900 95,000/190,000 SBUA-54 54 5 (4” opt) 21 6 1/2”, 9 1/2”, 11 1/2” 30,600/40,900 105,000/210,000 SBUA-60 60 5 14 6 1/2”, 9 1/2”, 11 1/2” 38,200/50,900 187,500/350,000 SBUA-66 66 5 15 11 1/2” 47,100/62,800 200,000/375,000 SBUA-72 72 5 16 11 1/2”, 14” 64,100/79,800 225,000/400,000 Note: Metric sizes available
BACKHOE-LOADERS Company Model Operating Max. Reach Backhoe HP Weight (lbs) (height to pin) Dig Depth Case 580N 14,564 18/3.5 14/9 78 580 Super N 16,239 18/2.4 14/5.6 95 580 Super N WT 19,985 18/3.1 14/6.4 95 590 Super N 20,458 19/7.2 15/5.8 108
Caterpillar 416E 14,960 10’ 11” 17’ 11” 87 420E 15,474 10’ 11” 17’ 11” 93 430E 16,066 10’ 11” 19’ 6” 102 450E 24,140 11’ 5” 21’ 4” 124
John 110TLB 7,600 N/A 10’ 1” 41 Deere 310J 13,800 11’ 1” 14’ 3” 72 310SJ 14,430 11’ 2” 14’ 6” 92 315SJ 15,470 11’ 2” 14’ 1” 92 410J 15,000 11’ 0” 15’ 10” 95 710J 23,000 12’ 5” 17’ 10” 123
Komatsu WB142-5 14,513 18’ 4” 14’ 2” 76 WB146-5 16,090 18’ 10”-22’ 2” 14’ 6”-18’ 2” 88 WB146PS-5 16,230 18’ 10”-22’ 2” 14’ 6”-18’ 2” 88 WB156-5 16,530 19’ 10”-23’ 6” 15’ 6”-19’ 7” 95 WB156PS-5 16,670 19’ 10”-23’ 6” 15’ 6”-19’ 7” 95 Kubota B21 3,836 20.5” 91.7” 21 L39 6,987 22.5” 121” 39 L48 7,760 22.8” 134.6” 48
New B90B 15,677 11’ 4” 18’ 3” 91 Holland B95B 16,008 11’ 4” 18’ 3’ 91 B95BTC 18,135 10’ 10” 18’ 3” 91 B95B LR 16,088 11’ 4” 18’ 9” 91 B110B 16,316 11’ 5” 18’ 9” 108 B115B 16,289 11’ 3” 18’ 5” 108
Volvo BL60 16,178 19’ 3” 14’ 5” 83 BL70 17,248 19’ 3” 14’ 9” 90
CABLE LAYERS Company Model HP Operating Max. Max. Wt. (lbs) Installation Reel Depth (in) Capacity (lbs) Astec RT60 13 720 36 N/A RT130 13 903 36 N/A RT160 24 1,530 48 N/A TF300B 18.5 2,450 45 N/A Maxi Sneaker D 37 2,601 36 300 RT360 32 3,906 60 300 RT600 65 8,500 72 2,500 RT800 75 10,000 72 2,500 RT1000 99 13,500 84 3,780 RT1160 115 14,000 84 3,780 RT1200 121 14,000 84 3,780
Ditch 100SX 11 720 12 N/A Witch 420SX 41 3,852 24 N/A RT45 42.2 4,200 63 RT55 60 5,610 62 1,500 RT80 83 10,710 62 RT95 99 7,980 36 2,500 RT115 115 7,980 96 2,500 RT115 Quad 115 15,240 96 HT115 115 12,000 96 3,000 RWF 150 200 30,000 48 8,000 Industries 250 48,000 72 12,000 350 58,000 72 12,000 450 68,000 78 12,000
Vermeer LM25 25 2,570* 36 150 LM42 42 3,550* 42 150 RTX450 42 4,500* 60 500 RTX550 65 7,800 60 2,000 RTX750 67 9,330 36 1,500 RTX1250 120 13,620* 42 3,000 XTS1250 120 17,950* 42 5,000 *tractor weight
Equipment Selection Guide
June 2011 Underground Construction 47ucononline.com
CABLE PLOWS Company Model HP Max. Plow Offset Approximate Depth Range Weight (in) (in) (lbs) Astec (see listing under Cable Layers)
Ditch Witch (see listing under Cable Layers)
RWF V65 50-75 38 48 2,100 Industries V75-1 75-130 42 48 3,200 V75-2 120-150 48 51 4,200 V100 150-200 60 60 6,400 V150 75-140 42 42 2,600 HS X-1 75-140 60 60 5,900 HS-I 150-200 60 66 8,700 HS-II 210-300 66 65 11,200 HS-III 320-425 72 72 14,750
Vermeer (see listing under Cable Layers)
CABLE PLOWS, OFFSETTING RAILCAR Company Model Max. Plow Offset Approximate Depth (in) Range (in) Weight (lbs) RWF BRON HS-III-R2 78 138 26,000 Industries BRON HS-III-R3 78 186 32,000
COMPACT TRACK LOADERS Company Model HP Operating Rated Machine Machine Machine Wt. Operating Length Height Width (lbs) Capacity (lbs) (in) (in) (in) Bobcat T110 41.8 5,202 1,100 89.7 74.1 47.2 T180 66 7,625 1,800 101.8 76.3 66 T190 66 7,775 1,900 101.8 76.3 66 T300 81 9,702 3,000 114.5 80.9 78 T320 92 9,702 3,100 114.5 80.9 78 T630 74.3 9,015 2,230 108.4 81.3 74 T650 74.3 9,440 2,570 108.4 81.3 84 T750 85 10,327 3,325 141.6 81.3 78 T770 92 10,327 3,475 141.6 81.3 78 T870 99 12,678 3,525 119.3 83.4 83 Case TR270 70 8,200 2,700 129.6 78.7 65.9 TR320 84 9,600 3,200 142 80.4 76 TV380 84 10,200 3,800 142 80.4 76
Caterpillar 259BC 71 8,934 2,950 135 78 66 279C 84 9,892 3,200 145 83 78 289C 84 10,365 3,850 145 83 78 299C 94 10,730 4,150 151 83 78
John CT315 45 6,800 2,206 124 77 61 Deere 319D 58 8,550 2,800 132 79 70 323D 69 8,550 3,600 132 79 70 329D 80 10,830 4,150 142 85 79 333D 89 11,100 4,725 142 85 81
Komatsu CK30-1 84 9,546 2,485 144.9 83.9 78.3 CK35-1 84 10,053 2,755 144.9 83.9 78.3
New Holland C175 56 7,535 3,150 129.7 75.9 C185 77 9,100 3,643 141.2 80.1 C190 83 9,820 4,143 148.2 80.1 C227 70 8,200 105.1 78.7 65.9 C232 76 9,630 117.8 80.4 76 C238 84 10,100 117.6 80.4 76
Volvo MCT125C 84 10,205 2,797 146 82 78 MCT135C 92 10,663 3,020 149 82 78
CRAWLER DOZERS Company Model HP Operating Blade Wt. (lbs) Capacity (cu. yds.) Case 550H LT 67 14,317 1.65 550H WT 67 14,600 1.9 650L LT 74 16,250 1.58 650L WT 74 16,800 2.0 750L WT 84 19,700 2.32 850L WT 96 20,200 2.32 850L XLT 96 19,600 2.16 1150K LT 118 27,858 3.8 1150K WT 118 28,667 4.2 1650L WT 144 36,691 4.12 1650L XLT 144 35,203 4.12 1850K LT Series 3 184 44,269 7.3 1850K XLT Series 3 184 46,649 7.3 750L LT 84 18,900 2.16
Caterpillar D3K XL 74 17,185 1.99 D3K LGP 74 17,842 2.17 D4K XL 84 17,961 2.59
Underground Construction June 201148 ucononline.com
CRAWLER DOZERS Company Model HP Operating Blade Wt. (lbs) Capacity (cu. yds.) Caterpillar D4K LGP 84 18,742 2.42 D5K XL 96 20,741 2.86 D5K LGP 96 21,347 3.06 D6K XL 125 28,409 3.5 D6K LGP 125 29,690 3.8 D6N XL 150 36,497 4.16-5.6 D6N LGP 150 39,112 4.13 D6T 185 40,550 7.34 D6T XL 200 44,795 7.34 D6T XW 200 46,703 7.35 D6T LGP 200 48,024 6.82 D7R Series II 240 55,050 8.98 D7E 235 56,670 8.98 D7E LGP 235 62,115 7.7 D8T 310 84,850 15.3 D9T 410 105,600 21.4 D10T 580 146,400 28.7 D11T 850 230,100 35.5-40 D11T CD 850 248,600 57 D6T* 227 46,158 6.94 D7E* 235 57,441 6.75 D8T* 310 87,733 11.4 *Tier 4 Interim/Stage III B
John Deere 450J LT 70 16,283 2.14 450J LGP 74 17,525 2.46 550J LT 80 17,016 2.35 550J LGP 84 18,252 2.46 650J LT 90 18,560 2.91 650J XLT 90 18,600 2.91 650J LGP 99 19,750 2.91 700J LGP 115 28,235 3.75 700J LT 115 26,080 3.44 700J XLT 115 27,125 3.44 750J 145 32,510 4.23 750J LT 145 34,320 4.23 750J WT 145 36,350 5.9 750J LGP 155 36,725 4.98 764 HSD 200/210 34,000 3.75 850K 187/205 42,449 5.87 850J LT 185 42,715 5.15 850J WT 185 40,985 7.62 850J WLT 185 43,925 5.57 850J LGP 200 45,075 5.87 850J WLT 185 43,925 5.57 850J* 185 46,700 16.0 950J 247 56,361 9.4 950J LGP 247 59,255 7.9 950J* 247 58,462 21.8 1050J 335 77,843 11.6 1050J* 335 80,967 25.8 *waste handler
Komatsu D21A-8EO 43.4 8,688 0.75 D21P-8EO 43.4 9,526 0.89 D31EX-22 78 18,056 2.11 D31PX-22 78 18,827 2.11 D37EX-22 89 18,289 2.32 D37PX-22 89 19,070 2.55 D39EX-22 105 20,834 2.89 D39PX-22 105 21,804 3.0 D51EX-22 130 28,043 3.5 D51PX-22 130 29,145 3.8 D61EX-15 168 37,237 4.5 D61PX-15 168 41,735 5.0 D65EX-16 205 44,550 7.34 D65EX-16 SL 205 46,051 14.8 D65WX-16 205 45,570 7.72 D65PX-16 205 46,960 4.83 D85EX-15 264 61,950 9.2 D85PX-15 264 60,960 7.7 D85EX-15 SL 264 67,350 18.5 D155AX-6 354 87,100 12.3 D155AX-6 SL 354 96,709 26.8 D275AX-5 449 113,600 19.1 D275AX-5 SL 449 107,083 36.6 D375A-6 610 157,940 28.8 D475A-5E0 890 238,960 45.0 D475ASD-5E0 890 249,560 58.9 D575A-3 SD 1,150 336,420 90 *Track frame configuration = standard; wide track
New Holland D75 75 18,200 2 D85B 90 18,895 2.16-2.60 D95B 99 19,629 2.16-2.73
DIRECTIONAL DRILLING RIGS, MINI (Under 50,000 pounds pullback)
Company Model Type Weight Boring Torque Pullback Drive (lbs) Diameter (ft/lbs) (lbs) Range (in) Astec DD-65C rack & pinion 2,600 1.75 500 6,000 DD-1416C dual rack & pinion 10,500 2.0 1,600 14,000 DD-2024C quad rack & pinion 10,500 2.0 2,400 20,000 DD-3238C dual rack & pinion 17,740 2.38 3,800 32,000 DD-4045 quad rack & pinion 20,000 4,500 40,000
Barbco BD15-PIT rack & pinion 2,500 varies 1,800* 15,000* BD15-10SC rack & pinion 15,000 varies 1,800* 15,000* BD30-15SC rack & pinion 20,000 varies 3,000* 30,000* *continuous duty rating
Ditch JT5 hydraulic 3,690 2.5 550 5,000 Witch JT922 hydraulic 7,100 3 1,100 9,000 JT1220 hydraulic 9,700 3-4 1,400 12,000 JT2020 hydraulic 10,800 4-5 2,200 20,000 JT3020M1 hydraulic 22,300 3.5-5 4,000 30,000 JT4020M1 hydraulic 27,670 5 5,000 40,000 JT3020AT hydraulic 22,200 3.5-5 4,000 30,000 JT4020AT hydraulic 28,170 6.25 5,000 40,000 *Operating weight varies depending on selected options.
McLaughlin McL-10H hydraulic motor 1,200 2-12 1,000 13,500 w/chain reduction
Source 910 hydraulic 6,200 3 min. 1,100 8,200 HDD 1820 hydraulic 10,000 3.5 min. 2,000 18,000 2462 hydraulic 12,000 3.5 min. 2,250 24,000 3550 hydraulic 22,500 4 min. 5,500 35,000
TT Grundopit 40/60 hydraulic 440 2.1 442 8,800 Techologies Grundodrill 4X hydraulic 4,100 2.5 950 9,800 Grundodrill 7X hydraulic 11,240 3.15 1,254 22,400 Grundodrill 15X hydraulic 15,400 3.15 3,100 33,000 Tulsa TR-7 compound cylinder 4,930 N/A 1,250 7,200 Trenchless TR-14 compound cylinder 5,360 N/A 1,600 14,000 TR-30 compound cylinder 15,000 N/A 5,000 30,000
Vermeer D6x6 chain 3,240 min. 2.25 550 5,500 D9x13 Series II rack & pinion 6,300 min. 2.5 1,300 9,000 D16x20 Series II rack & pinion 10,500 min. 3.5 2,000 16,000 D20x22 Series II rack & pinion 10,600 min. 3.5 2,200 20,000 D20x22FX Series II rack & pinion 13,200 min. 3.5 2,200 20,000 D24x40 Series II rack & pinion 18,440 min. 3.5 4,200 24,000 D36x50 Series II rack & pinion 19,800 min. 3.5 5,000 36,000
DIRECTIONAL DRILLING RIGS, MID (50,000 - 100,000 pounds pullback)
Company Model Type Weight Boring Torque Pullback Drive (lbs) Diameter (ft/lbs) (lbs) Range (in) American DD-6 rack & pinion 22,250 N/A 10,000 60,000 Augers DD-9014 rack & pinion 36,728 N/A 13,600 90,000
Astec DD-6 rack & pinion 22,250 3.5 10,000 60,000 DD-8 rack & pinion 36,000 3.5 13,600 80,000
Barbco BD50-15SC rack & pinion 34,000 varies 8,000* 50,000* BD50-20SC rack & pinion 36,000 varies 8,000* 50,000* BD60-15SC rack & pinion 38,500 varies 12,000* 60,000* BD60-50SC rack & pinion 42,000 varies 12,000* 60,000* BD90-15SC rack & pinion 38,500 varies 12,000* 90,000* BD90-20SC rack & pinion 42,000 varies 12,000* 90,000* BD250-TK rack & pinion 75,000 47,600 250,000 BD500-TK rack & pinion 95,000 63,000 500,000 BD750-TK rack & pinion 95,000 80,000 750,000 BD-1MM-TR rack & pinion custom option 100,000 1,000,000 *continuous duty rating
Central Mine CME 50 DD hydraulic 20,100 5 4,450/9,100 25,125/ Equipment rack/pinion 50,250
Ditch Witch JT100 rack & pinion 45,300 6 12,000 100,000 JT100AT rack & pinion 47,260 *Operating weight varies depending on selected options.
Tulsa Rig HDR-60T rack & pinion 25,000 N/A 11,000 60,000 Iron HDR-90T rack & pinion 35,000 N/A 15,000 90,000
Vermeer D80x100 rack & pinion 42,500 min. 5.0 10,000 80,000 Series II D100x120 rack & pinion 43,500 min. 5.0 12,000 100,000 Series II
DIRECTIONAL DRILLING RIGS, MAXI (over 100,000 pounds pullback)
Company Model Type Weight Torque Pullback Drive (lbs) (ft/lbs) (lbs) American DD-210 rack & pinion 58,600 25,000 210,000 Augers DD-440 rack & pinion 86,000 60,000 440,000 DD-440T rack & pinion 87,600 60,000 440,000 DD-625 rack & pinion 86,000 80,000 625,000 DD-880 rack & pinion 103,000 100,000 880,000 DD-1100 rack & pinion 103,000 100,000 1,100,000
Barbco BD110-20SC rack & pinion 43,000 17,500* 110,000* BD120-20SC rack & pinion 48,000 25,000* 120,000* *continuous duty rating
Tulsa HDR-120T rack & pinion 39,000 22,000 125,000 Rig HDR-160T rack & pinion 45,000 30,000 160,000 Iron HDR-160TA rack & pinion 47,000 38,000 160,000 HDR-250 rack & pinion 60,000 38,000 250,000 HDR-250A rack & pinion 60,000 47,500 250,000 HDR-500-1 rack & pinion 65,000 38,000 500,000 HDR-500-2 rack & pinion 65,000 47,500 500,000 HDR-500S rack & pinion 70,000 75,500 500,000
Vermeer D330x500 rack & pinion 90,000 50,000 330,000 D500x500 rack & pinion 82,000 50,000 500,000 D750x500 rack & pinion 101,000 102,500 750,000 D1000x1000 rack & pinion 101,000 102,500 1,000,000 D1320x900 rack & pinion 101,000 102,500 1,320,000
EXCAVATORS, MINI (under 25,000 pounds)
Company Model Operating HP Bucket Max. Digging Max. Machine Wt. (lbs) Capacity Depth Reach Width (cu. yd.) (height to pin) Bobcat 324 3,428 13.9 0.04 8’ 6” 14’ 39”-54” E26 5,600 27 0.09 8’ 6” 15’ 4” 60” E32 7,194 33.3 0.13 10’ 3” 16’ 4” 59.8” 418 2,593 10.2 0.03 6’ 10’ 2” 27.6”-35.4” E35 7,560 33.3 0.13 10’ 3” 17’ 2” 69” E42 9,246 33.2 0.13 10’ 6” 17’ 3” 69” E45 10,077 41.8 0.19 10’ 10” 18’ 7” 77.2” E50 10,677 48.8 0.19 11’ 7” 19’ 6” 77.2” E55 12,478 48.8 0.19 12’ 11” 19’ 11” 77.2” E60 13,556 52.3 0.19 13’ 7” 21’ 4” 78” E80 18,689 54.2 0.27 15’ 6” 24’ 5” 90.6”
Case CX17B 3,638 15.2 0.03-0.048 7’ 1” 12’ 1” 2’ 11” CX27B 5,556 21.3 0.05-0.11 8’ 4” 14’ 0” 4’ 11” CX31B 6,679 28.4 0.08-0.16 9’ 2” 15’ 7” 5’ 1” CX36B 7,958 28.4 0.08-0.24 10’ 1” 16’ 8” 5’ 7” CX50B 10,261 102.7 0.11-0.24 11’ 9” 18’ 10” 6’ 5” CX55B 12,295 39.3 0.11-0.24 12’10” 18’11” 6’ 5”
Caterpillar 301.6C 3,549 18.1 0.073 7’ 7” 9’ 7” 301.8C 3,703 18 0.073 7’ 7” 9’ 7” 302.5 6,052 24.9 0.145 9’ 7” 9’ 7” 303.5D CR 8,160 30 10’ 4” 16.7’ 5’ 10” 304D CR 8,852 39 11’ 3” 17.6’ 6’ 5” 305D CR 11,365 42 12’ 1” 17.8’ 6’ 6” 305.5D CR 12,048 47 12’ 8” 18.5’ 6’ 6” 307D 15,598 55.6 0.45 15’ 1” 21’ 11” 308D CR 17,306 55.6 0.45 15’ 2” 22’ 0” 308D CR SB 18,519 55.6 0.45 15’ 6” 24’ 5”
Ditch Witch XT855 4,520 29.5 3.4-4.2 6’ 11” 8’ 7” 4’ 2” XT1600 9,420 53 11’ 10” 14’ 9” 5’ 9”
Doosan DX60R 13,283 51 0.23 12’ 3” N/A 78” DX80R 18,475 55 0.31 13’ 7” N/A 86” Hitachi Zaxis 17U-2 4,173 14.8 0.052 7’ 1” N/A 4’ 2” Zaxis 27U-3 6,358 26.4 0.163 8’ 6” N/A 5’ 1” Zaxis 35U-3 7,760 28.6 0.219 10’ N/A 5’ 9” Zaxis 50U-3 10,811 38.1 0.307 11’ 8” N/A 6’ 7” Zaxis 60USB-3 13,653 54 0.463 12’ 4” N/A 6’ 7” Zaxis 75US-3 17,743 54 0.66 15’ 1” N/A 8’ 1” Zaxis 85USB-3 18,821 54 0.66 14’ 8” N/A 8’ 1”
Hyundai R16-9* 3,640 16.2 0.05 7’ 5” 13’ 0” 3’3”-4’1” R27Z-9 6,350 23.1 0.10 8’ 2” 15’ 3” 5’ 1” R35Z-7A 8,050 26.5 0.14 10’ 4” 17’ 7” 5’ 9” R55-9 12,460 55.2 0.09-0.24 12’ 6” 20’ 2” 6’ 4” R80-7A 17,200 58.2 0.37-0.41 13’ 7” 20’ 9” 7’ 5” * variable width
John 17D 4,173 14.8 0.60-1.40 7’ 1” N/A 3’ 3” Deere 27D 6,393 26.4 1.33-4.40 8’ 7” N/A 5’ 1” 35D 7,672 29.9 1.33-5.90 10’ 0” N/A 5’ 9” 50D 10,428 39.9 2.1-8.3 11’ 10” N/A 6’ 7” 60D 13,653 54 5.1 12’ 4” N/A 6’ 7”
E
EXCAVATORS, MINI (under 25,000 pounds)
Company Model Operating HP Bucket Max. Digging Max. Machine Wt. (lbs) Capacity Depth Reach Width (cu. yd.) (height to pin) Kobelco 17SR 3,638 15.2 0.02-0.05 7’ 1” 12’ 5” 4’ 4” 27SR 5,556 21.6 0.1 8’ 4” 14’ 10” 4’ 11” 35SR 7,959 28.43 0.12 10’ 1” 16’ 9” 5’ 7” 50SR 10,274 39.3 0.21 11’ 9” 18’ 10” 6’ 5” 55SRx 12,295 39 0.1-3.6 12’ 10” 18’ 11” 6’ 5” 70SR 17,300 56 0.23-0.53 15’ 22’ 8’ 2” 80CS 18,940 56 0.23-0.53 15’ 5” 24’ 7” 8’ 2” all models are ACERA
Komatsu PC09-1 1,985 8.7 0.013-0.026 4’ 11” 9’ 11” 2’10” PC18MR-3 4,090 15 0.028-0.067 7’ 1” 12’ 11” 4’3” PC27MR-3 6,460 25.7 0.066-0.197 9’ 4” 15’ 10” 5’ 1” PC35MR-3 7,909 29 0.066-0.197 11’ 4” 18’ 1” 5’ 9” PC45MR-3 10,573 38.2 0.111-0.296 12’ 19’ 4” 6’ 5” PC55MR-3 11,378 38.2 0.111-0.296 12’ 6” 19’ 11” 6’ 5” PC78US-8 16,240 55 0.16-0.53 15’ 5” 22’ 3” 7’ 8” PC88MR-8 18,558 65 0.16-0.53 15’ 2” 23’ 5” 7’ 8” Kubota K008-3 2,200 10.2 varies 5’ 8” 9’ 11” 2’4”-2’10” KX41-3 3,693 17 varies 7’ 9.7” 12’ 8.4” 3’3”-4’3.2” KX71-3 6,550* 27.5 varies 9’ 9” 16’ 4’ 11” KX91-3S 7,330* 28 varies 10’ 5” 16’ 10” 5’ 1” U35 8,267* 28 varies 10’ 4” 16’ 11” 5’ 7” KX121-3S 9,267* 42 varies 11’ 6” 18’ 5’ 7” KX161-3 11,698 47 varies 12’ 7” 20’ 1” 6’ 5” *reach at ground level
New Holland E18B 3,638 15.2 0.05 7’ 1” 12’ 9” 4’ 4” E27B 5,557 21.3 0.1 8’ 4” 14’ 10” 4’ 11” E35B 7,960 28.4 0.12 10’ 1” 16’ 9” 5’ 7” E50B 10,275 40.8 0.21 11’ 9” 18’ 1” 6’ 5” E55Bx 12,295 39 0.1-3.6 12’ 10” 18’ 11” 6’ 5” E70B 17,300 55.7 0.23-0.53 15’ 22’ 6” 8’ 2” E80B 18,940 55.7 0.30-0.88 15’ 5” 25’ 1” 8’ 2”
Volvo EC15B XTV* 3,539 15 0.60-2.12 6’ 9” 11’ 10” 3’ 3” EC20B XTV* 3,848 15 1.06-4.06 7’ 9” 13’ 2” 3’ 3” EC27C 5,854 26 1.13-5.30 9’ 2” 14’ 6” 5’ 1” EC20C 4,277 16.8 1.06-4.06 7’ 4” 13’ 0” 3’ 3” ECR28 6,012 18 1.20-4.20 7’ 10” 14’ 3” 4’ 11” ECR38 7,355 27 1.30-5.40 8’ 11” 15’ 9” 5’ 4” EC35C 7,573 35 1.51-5.78 10’ 5” 16’ 7” 5’ 4” ECR48C 10,406 35 1.30-5.41 11’ 2” 18’ 3” 6’ 5” EC55C 12,566 47.1 2.80-12.0 12’ 4” 19’ 7” 6’ 4” ECR58 12,863 51 2.50-9.40 11’ 8” 19’ 5” 6’ 6” *variable width
EXCAVATORS, LARGE (over 25,000 pounds)
Company Model Operating HP Bucket Max. Digging Max. Wt. (lbs) Capacity Depth Reach (cu. yd.) Case CX75 17,468 54 0.24-0.70 13’7” 21’0” CX75 Offset Boom 17,468 54 0.24-0.70 13’9” 20’10” CX80 18,585 54 0.24-0.70 13’9” 22’7” CX130B 27,800 95 0.50-1.00 19’10” 28’4” CX135 29,631 95 0.50-0.96 19’5” 27’8” CX160B 37,700 120 0.50-1.00 21’4” 30’3” CX210B Narrow 47,200 157 0.65-1.31 21’9” 31’11” CX210B 47,400 157 0.62-1.12 21’10” 31’11” CX225 53,223 153 0.65-1.53 22’0” 31’11” CX240B 55,115 177 0.75-2.00 24’4” 34’10” CX250C 55,400 177 1.26-2.93 22’8” 33’2” CX290B 65,697 207 0.79-2.15 24’11” 36’1” CX300C 65,900 207 1.26-2.93 23’4” 36’0” CX350C 80,000 266 1.26-2.93 26’8” 38’5” CX470B 103,800 362 1.76-4.05 27’4” 40’5” CX700B 153,400 463 2.53-5.91 32’4” 46’11” CX800B 178,575 532 2.53-5.91 35’0” 52’1” NOTE: Bucket digging and arm (stick) forces = Normal (N) digging forces are listed when published; otherwise Boost values are shown. Caterpillar 311D LLR 27,514 80 0.97 18’ 4” 23’ 312D L 29,650 90 0.97 19’ 9” 28’ 4” 314D LCR 31,085 90 1.12 19’ 6” 28’ 4” 315D L 38,095 115 1.15 21’ 7” 30’ 319D L 43,870 125 1.4 22’ 7” 31’ 8” 320D L 47,554 148 2.05 20’ 11” 32’ 4” 320D L RR 53,361 148 2.05 20’ 11” 32’ 4” 321D LCR 53,307 148 1.3 21’ 9” 31’ 9” 324D L 52,602 188 2.39 24’ 1” 34’ 7” 329D L 64,460 204 2.61 25’ 8” 36’ 7” 328D LCR 76,500 204 2.60 22’ 8” 35’ 4” 336D L 79,700 268 3.34 27’ 9” 39’ 5” 345D L 100,040 380 4.03 26’ 11” 39’ 9” 365C L 145,430 405 4.58 30’ 10” 46’ 3” 385C 182,800 513 7.7 37’ 11” 55’ 11” 336E L 80,617 291 2-3 26’ 10” 38’ 5” 349E L 105,400 396 3-4 26’ 10” 39’ 9” 374D L 156,819 476 4-5 31’ 8” 46’ 8” 390D L 190,016 523 5-8 29’ 4” 46’ 1”
Doosan DX140LC 30,865 95 0.67 17’ 3” 25’ 3” DX140LCR 31,923 95 0.67 21’ 9” 30’ 8” DX180LC 38,934 118 0.92 20’ 1” 29’ 6” DX225LC 48,720 148 1.20 21’ 9” 31’ 11” DX235LCR 5.,572 166 1.20 21’ 11” 31’ 7” DX255LC 55,556 166 1.44 22’ 4” 32’ 10” DX300LC SLR 66,139 197 0.84 45’ 6” 57’ 1” DX300LC 66,580 197 1.66 24’ 2” 35’ 3” DX350LC 77,603 271 1.95 24’ 9” 36’ DX420LC 92,369 292 2.49 25’ 4” 37’ DX420 RCW 72,800 292 2.49 25’ 4” 37’ DX480LC 108,644 329 2.80 25’ 7” 38’ 11” DX520LC 111,774 329 3.73 22’ 3” 34’ 4” DX480 RCW 108,908 329 2.80 25’ 7” 38’ 11” DX520LC 111,774 329 3.73 22’ 3” 34’ 4” DX700LC 158,953 401 4.32 25’ 5” 41’ 8” Hitachi Zaxis 120-3 27,778 93 1.01 19’ 11” 28’ 10” Zaxis 135US-3 31,147 93 1.01 19’ 9” 29’ Zaxis 160LC-3 37,908 121 1.11 21’ 4” 30’ 7” Zaxis 200LC-3 47,015 159 1.43 21’ 11” 32’ 7” Zaxis 225USLC-3 53,936 159 1.43 22’ 32’ 10” Zaxis 250LC-5 54,498 188 3.90 25” 35’ 10” Zaxis 290LC-5 63,273 188 3.90 25’ 10” 37’ Zaxis 350LC-5 76,258 271 2.4 26’ 10” 38’ 11” Zaxis 470LC-5 108,952 367 4.2 27’ 2” 41’ 10” Zaxis 470LC-5*** 110,502 367 4.2 20’ 5” 35’ 8” Zaxis 670LC-5 158,045 463 6.6 30’ 45’ 5” Zaxis 670LC-5*** 157,969 463 6.6 23’ 4” 38’ 9” Zaxis 870LC-5 193,255 532 7.6 31’ 5” 48’ 11” Zaxis 870LC-5*** 193,803 532 7.6 23’ 5” 40’ 6” EX1200-6 BE* 246,917 740 8.8 26’ 5” 45’ 1” EX1200-6** 251,327 740 8.5 15’ 8” 37’ 9” EX1900-6 BE* 423,280 1,039 5.7 26’ 10” 50’ EX1900-6** 421,075 1,039 19.6 19’ 5” 44’ 1” EX2500-6* 546,700 1,333 19.6 28’ 56’ EX2500-6** 549,000 1,333 21.6 12’ 46’ EX3600-6* 791,500 1,994 29 28’ 2” 59’ 8” EX3600-6** 795,900 1,994 30 12’ 49’ 11” EX5500-6* 1,151,000 2,666 38 29’ 6” 68’ 7” EX5500-6** 1,151,000 2,666 35.5 14’ 11” 54’ 6” EX8000-6** 1,787,900 3,880 52.3 13’ 5” 60’ 7” *backhoe; **front shovel; ***mass excavator
Hyundai R110LC-7A 24,690 89 0.39-0.77 16’ 8” 25’ 5” R110LCD-7A 26,230 89 0.39-0.77 16’ 8” 25’ 5” R140LC-9 30,820 105 0.30-0.93 18’ 4” 27’ 3” R140LCD-9 32,630 105 0.30-0.93 18’ 4” 27’ 3” R145LCR-9 w/blade 34,830 113 0.30-0.93 18’ 1” 27’ 3” R160LC-9 39,240 120 0.51-1.16 19’ 11” 29’ 7” R180LC-9 43,760 120 0.51-1.37 19’ 11” 29’ 7” R210LC-9 49,930 143 0.67-1.75 22’ 1” 32’ 9” R210LC-9 LR 54,900 143 0.30-0.68 38’ 7” 50’ 0” R250LC-9 56,200 183 0.78-1.96 23’ 0” 34’ 0” R290LC-9 67,150 197 1.03 - 2.42 24’ 7” 35’ 6” R290LC-9 LR 73,330 197 0.30 - 0.68 48’ 7” 60’ 9” R320LC-9 74,960 263 1.18 - 2.75 24’ 2” 36’ 7” R380LC-9 86,200 271 1.50 - 3.03 24’ 8” 36’ 11” R480LC-9 109,610 342 1.80 - 4.19 25’ 7” 39’ 8” R520LC-9 114,820 342 1.80 - 4.71 24’ 11” 39’ 8” R800LC-7A 183,110 490 4.45 - 6.67 23’ 9” 40’ 2” Mass Excavator
John 75D 17,743 54 0.4-0.66 15’ 1” 22’ 2” Deere 85D 18,821 54 0.4 - 0.66 14’ 8” 24’ 9” 120D 28,498 93 0.48 - 1.01 19’ 11” 28’ 5” 135D 30,582 93 0.48 - 1.01 18’ 2” 27’ 1” 160D LC 39,980 121 0.50 - 1.30 21’ 4” 30’ 1” 200D LC 49,940 159 0.59 - 1.60 21’ 11” 32’ 0” 225D LC 53,936 159 0.59 - 1.60 22’ 0” 32’ 3” 250G LC 55,736 191 0.92 - 2.04 25’ 0” 35’ 3” 290G LC 66,338 197 0.92 - 2.04 25’ 10” 36’ 5” 350G LC 76,557 299 1.20 - 3.43 26’ 10” 38’ 3” 470G LC 108,952 367 1.8 - 4.2 27’ 2” 40’ 3” 470G LC ME 110,502 367 1.76 - 4.2 20’ 5” 34’ 10” 670G LC 158,045 463 1.3 - 6.6 30’ 0” 44’ 8” 670G LC ME 157969 463 1.3 - 6.6 23’ 4” 37’ 9” 870G LC 193,255 532 2.0 - 7.6 31’ 5” 48’ 0” 870G LC ME 193,803 532 2.0 - 7.6 23’ 5” 39’ 5” NOTE: Bucket digging and arm (stick) forces = Normal (N) digging forces are listed when published; otherwise Boost values are shown. Kobelco 140SR 32,040 94 0.30-0.88 21’ 7” 28’ 4” 215SR 54,700 153 0.68-1.60 21’ 7” 31’ 3” 235SR 56,865 153 0.68-1.60 21’ 8” 31’ 10” SK170LC 37,800 121 0.45-1.36 21’ 5” 30’ 6” SK210LC 47,800 150 0.63-1.80 22’ 31’ 11” SK260LC 57,300 181 0.75-2.25 23’ 33’ 3” SK295LC 66,800 197 0.75-2.35 23’ 8” 34’ 7” SK330LC 79,600 264 0.88-2.75 24’ 10” 36’ 3” SK485LC 110,670 326 1.5-4.0 25’ 7” 38’ 10” SK8850LC Super 177,330 496 2.5-7 31’ 10” 46’ 11” ED150 Bladerunner 35,900 94 0.30-0.88 19’ 1” 28’ 3” ED195 Bladerunner 44,800 121 0.45-1.36 21’ 5” 30’ 7” all models are ACERA
Komatsu PC130-8 27,700 92 0.34-1.00 18’ 1” 26’ 10” PC138USLC-8 31,994 92 0.34-1.00 18’ 26’ 10” PC160LC-8 37,740 115 0.48-1.24 19’ 7” 28’ 10” PC200-8 44,110 148 0.66-1.57 21’ 9” 31’ 10” PC200LC-8 47,260 148 0.66-1.57 21’ 9” 31’ 10” PC228USLC-8 54,405 148 0.66-1.57 21’ 9” 31’ 10” PC220LC-8 54,926 168 0.76-1.85 22’ 8” 32’ 10” PC270LC-8 67,393 187 0.76-2.13 21’ 2” 32’ 9” PC308USLC-3 71,938 187 0.76-2.13 21’ 2” 33’ PC350LC-8 79,037 246 1.21-2.56 24’ 3” 35’ 10” PC350HD-8 88,178 246 1.21-2.56 23’ 10” 35’ 8” PC450LC-8 100,856 345 1.47-3.75 25’ 8” 38’ 9” PC450LC-8 103,226 345 1.47-3.75 25’ 8” 38’ 9” variable gauge PC600LC-8 132,280 429 2.05-4.98 27’ 10” 42’ PC600LC-8 SE 134,260 429 23’ 2” 37’ 1” PC800LC-8 SE 180,334 487 23’ 5” 39’ 2” PC800LC-8 182,980 487 2.23-5.93 28’ 3” 44’ 2” PC1250-8 239,880 672 3.9-5.9 30’ 8” 49’ 3” PC1250LC-8 250,154 672 3.9-5.9 30’ 8” 49’ 3” PC2000-8 440,920 956 15.7-17.9 30’ 4” 50’ 3” PC3000 564,500 1,260 15.7-19.5 25’ 11” 51’ 2” PC4000 865,000 1,875 29.0 26’ 3” 54’ 8” PC5500 1,180,000 2,520 38.0 27’ 3” 61’ 4” PC8000 1,565,000 4,020 55 27’ 7” 65’ 4”
New Holland E135B 32,040 94 0.30-0.88 19’ 7” 28’ 10” E175B 37,800 121 0.45-0.85 21’ 5” 31’ 1” E215B 47,800 150 0.91-1.13 22’ 32’ 6”
Volvo ECR88 18,629 56.8 3.6-9.4 13’ 8” 15’ 11” EC140C L 28,530 92 0.78-1.01 18’ 2” 26’ 10” ECR145C L 32,980 92 0.88-1.01 18’ 2” 26’ 11” ECR145C L* 34,440 92 0.88-1.01 18’ 2” 26’ 11” EC160C L 38,340 117 1.18-1.34 19’ 10” 28’ 11” EC210C NL 46,920 147 1.37-1.77 22’ 1” 32’ 0” EC210C L 48,520 147 1.37-1.77 22’ 1” 32’ 0” ECR235C L 54,790 147 1.51-1.70 22’ 2” 31’ 11” ECR235C L* 57,100 147 1.51-1.70 22’ 2” 31’ 11” EC240C L 57,110 168 1.70-2.16 22’ 11” 33’ 1” EC290C L 66,390 192 1.83-2.32 24’ 0” 34’ 5” ECR305C L 76,930 192 1.02-1.89 22’ 10” 34’ 3” ECR305C L* 79,770 192 1.02-1.89 22’ 10” 34’ 3” EC330C L 79,530 247 1.80-3.07 24’ 7” 35’ 5” EC330C L ME 79,710 247 2.52-3.20 22’ 1” 33’ 5” EC340D 77,240 279 2.32-3.07 26’ 8” 38’ 4”
EC360C L 86,570 247 2.35-3.63 24’ 7” 36’ 0” EC360C L ME 86,570 247 2.35-3.63 22’ 1” 33’ 8” EC380D 85,800 275 2.32-3.63 26’ 8” 38’ 4” EC460C L ME 105,130 315 2.35-4.58 21’ 7” 35’ 0” EC460C L 105,440 315 2.52-4.58 25’ 3” 38’ 8” EC460C L 107,780 315 2.49-4.61 21’ 2” 38’ 7” Variable U/C EC480D 105,00 348 2.31-4.97 29’ 8” 43’ 6” EC700C L 154,350 424 3.99-7.13 27’ 7” 42’ 4” EC700C L ME 158,070 424 4.84-8.6 23’ 9” 36’ 9” *w/blade
EXCAVATORS, WHEELED Company Model Operating HP Bucket Max. Digging Max. Travel Wt. (lbs) Capacity Depth Reach Speed (cu. yd.) (mph) Caterpillar M313D 35,715 127 1.4 18’ 11” 30’ 3” 23 M315D 40,345 135 1.47 20’ 31’ 5” 21 M316D 43,651 158 1.47 20’ 31’ 5” 23 M318D 44,313 166 1.65 20’ 1” 31’ 6” 23 M322D 49,604 165 2.05 20’ 8” 33’ 10” 15
Doosan DX55W 12,236 55 0.23 11’ 6” 20’ 1” 19 DX140W 16,967 132 0.59 15’ 24’ 8” 23 DX190W 39,242 156 1.05 19’ 7” 30’ 2” 22.4 DX210W 45,856 161 0.86 19’ 9” 31’ 11” 23
Hitachi Zaxis 190W-3* 44,029 159 1.43 19’ 2” 31’ 5” 21.7 Zaxis 190W-3** 45,636 159 1.43 19’ 5” 31’ 1” 21.7 Zaxis 220W-3* 49,888 159 1.43 20’ 8” 33’ 4” 17.1 Zaxis 220W-3** 52,003 159 1.43 19’ 11” 32’ 8” 17.1 *monoblock boom; **2-piece boom; NOTE: all modes are front blade, rear outfigger.
Hyundai R55W-9* 12,240 55.2 0.09 - 0.24 11’ 6” 20’ 2” 6’ 4” R140W-9** 32,410 133 0.30 - 0.93 15’ 11” 26’ 0” 8’ 2” R170W-9** 40,610 153 0.51 - 1.37 17’ 9” 28’ 6” 8’ 2” R210W-9** 45,200 153 0.67 - 1.75 20’ 11” 32’ 6” 8’ 2” *w/dozer blade; *rear dozer & front outrigger
John 190D W* 43,211 159 0.52-1.43 19’ 2” 30’ 10” 21.7 Deere 190D W** 44,974 159 0.52-1.43 19’ 5” 30’ 6” 21.7 220D W* 49,207 159 0.52-1.39 20’ 8” 32’ 8” 17.1 220D W** 51,368 159 0.52-1.43 19’ 1” 32’ 0” 17.1 *monoblock boom; **2-piece boom
EXCAVATORS, WHEELED Company Model Operating HP Bucket Max. Digging Max. Travel Wt. (lbs) Capacity Depth Reach Speed (cu. yd.) (mph) Volvo EW160C* 38,260 142 0.85-1.21 18’ 4” 28’ 11” 21.7 EW160C 39,176 142 0.75-1.08 18’ 3” 29’ 5” 21.7 EW180C* 42,330 152 0.88-1.24 19’ 1” 29’ 9” 21.7 EW180C 43,660 152 0.88-1.24 19’ 5” 30’ 5” 21.7 EW210C 48,190 161 0.92-1.44 19’ 10” 31’ 0” 18.6 EW210C* 46,650 161 0.92-1.47 20’ 3” 31’ 0” 18.6 EW230C* 50,489 167 1.21-1.47 21’ 3” 33’ 1” 15.5 EW230C 52,250 167 1.21-1.47 21’ 4” 33’ 1” 15.5 *monoblock boom
HDD MUD SYSTEMS Company Model Mud Storage Mud Cleaning Pump Type Mixing Method Shaker Screens Desander, Mounting Option Capacity (gal) Capacity (gpm) Desilter Cones (skid/trailer) American MCM-4000 4,000 400 N/A jet yes yes both Augers MPR-6000 6,000 500 Quintiplex jet yes yes rockover MCR-10000 10,000 1,000 N/A jet yes yes rockover P500/G2 N/A N/A Quintiplex N/A N/A N/A skid P750/G2 N/A N/A Quintiplex N/A N/A N/A skid
Astec FM130 500 130 centrifugal jet no no skid FM330 500/1,000 330 centrifugal jet no no skid Ditch Witch FM5 300 N/A centrifugal venturi/jet N/A N/A both FT5 200 N/A centrifugal venturi N/A N/A both FM13V 500/1,000 N/A centrifugal venturi/jet N/A N/A both FM25 500/1,000 N/A centrifugal venturi N/A N/A both FM50 500/1,000/2,000 N/A centrifugal venturi/jet N/A N/A both
KEMTRON Mud Bug 65S 500 65 centrifugal jet yes yes skid Mud Bug 130T 500 130 centrifugal jet yes yes trailer Pit Bull 1,000 300 centrifugal jet yes yes both Tango 350 3,000 350 centrifugal jet yes yes both Tango 500 3,000 500 centrifugal jet yes yes both Tango 750 4,000 750 centrifugal jet yes yes skid Tango 1000 7,500 1,000 centrifugal agitator yes yes both
McLaughlin McL-230P 230 N/A high pressure reciprocating agitator no no skid
SiteTec P150D N/A N/A high pressure, 40 gpm N/A N/A N/A skid P500D N/A N/A high pressure, 132 gpm N/A N/A N/A skid P1000D N/A N/A high pressure, 264 gpm N/A N/A N/A 15” skid P1000DH N/A N/A high pressure, 264 gpm N/A N/A N/A 10” container P1500D N/A N/A high pressure, 396 gpm N/A N/A N/A 15” skid P2500D N/A N/A high pressure, 660 gpm N/A N/A N/A 20” container M510D 1,321 N/A centrifugal venturi/jet N/A N/A both M1000E 3,963 N/A centrifugal venturi/jet/agitator N/A N/A skid M1000EC 3,170 N/A centrifugal venturi/jet/agitator N/A N/A skid M1502E 5,550 N/A centrifugal venturi/jet/agitator N/A N/A skid M2002E 5,550 N/A centrifugal venturi/jet/agitator N/A N/A skid M2002EL 8,850 N/A centrifugal venturi/jet/agitator N/A N/A skid MP100DH 660 N/A centrifugal/high pressure venturi/jet N/A N/A both MP200DH 793 N/A centrifugal/high pressure venturi/jet N/A N/A both MP500DH 2,642 N/A centrifugal/high pressure venturi/jet/agitator N/A N/A both MP750DH 2,642 N/A centrifugal/high pressure venturi/jet/agitator N/A N/A skid MP1000DH 3,700 N/A centrifugal/high pressure venturi/jet/agitator N/A N/A skid R300E 264 80 centrifugal/submersible N/A yes yes both R500E 396 132 centrifugal/submersible N/A yes yes both R1000EL 1,189 265 centrifugal/submersible N/A yes yes both R1500E 1,585 396 centrifugal/submersible N/A yes yes skid R2000E 2,113 528 centrifugal N/A yes yes skid R2002EL 2,641 528 centrifugal N/A yes yes skid ST1500E 3,963 N/A centrifugal jet N/A N/A skid ST2000E 5,283 N/A centrifugal jet N/A N/A skid PS4D N/A N/A Seltorque, self priming N/A N/A N/A both PS6D N/A N/A Seltorque, self priming N/A N/A N/A both PM4E N/A N/A centrifugal N/A N/A N/A both PM6E N/A N/A centrifugal N/A N/A N/A both PM4D N/A N/A centrifugal N/A N/A N/A both PM6D N/A N/A centrifugal N/A N/A N/A both
Source Performix varies 365 centrifugal/wet seal venturi/tank gun N/A N/A skid HDD Performix Ultra varies 450 centrifugal/wet seal venturi/tank gun N/A N/A skid
TT DS225 225 N/A diaphragm centrifugal pump N/A N/A skid Technologies DS500 500 N/A piston tank propeller N/A N/A skid DS1000 1,000 N/A piston tank propeller N/A N/A skid GS225 Combo 225 N/A diaphragm tank propeller N/A N/A skid GS225 225 N/A diaphragm centrifugal pump N/A N/A skid
TriFlo MFS 1200 1,200 100-150 centrifugal venturi 2 0/4-4” skid MFS 2500 2,500 250-350 centrifugal venturi 2 0/6-4” skid MFS 3500 3500 350-500 centrifugal venturi 2 0/12-4” skid MFS 9000 9000 450-550 centrifugal venturi 3 1-10”/12-4” skid MFS 12000 12,000 750-1,200 centrifugal venturi 4 2-10”/16-4” skid
Tulsa Rig MCS-325 2,000 240 Iron MCS-350 3,200 400 MCS-335 2,000 240 MCS-400 3,200 400 MCS-500 5,000 500 MCS-750 8,400 1,200 MCS-1000 6,000 800
Vermeer GM30 90 135 centrifical paddles/variable speed N/A N/A both MX125 300 or 500 N/A centrifical venturi/recirculation N/A N/A modular MX240 750 or 1,000 N/A centrifical venturi/recirculation N/A N/A modular HP250 250 N/A centrifical venturi/recirculation N/A N/A skid ST500HP 500 N/A centrifical venturi/recirculation N/A N/A skid ST250 250 N/A centrifical venturi N/A N/A skid
KEYHOLE EQUIPMENT Company Model Core Diameter Core Depth Power Source Mounting Option (in) (in) (hydraulic/gas) SIMCO Drilling 255PTC up to 18” 24+ diesel/gas-hydr truck/trailer/skid/crawler Equipment
Utilicor Series 500 Core Truck 12, 18, 24 22 PTO-hydraulic truck Technologies MD-100 Core Truck 12, 18, 24 22 PTO-hydraulic truck Minicor-2 Attachment 12, 18, 24 22 skid steer-hydr skid Trailicor Trailer Mount 12, 18, 24 22 gas/diesel-hydr trailer
LOCATORS (WALKOVER & UTILITY) Company Model Type Operating Battery Audio Output Weight Operating Overall Voltage Life Frequency (lbs) Temp. Length (hrs) (kHz) (in) DCI DigiTrak F5 Receiver Lithium Ion 8-12 1.3, 8.4, 12, 18.5, 19 8.0 -4°F to 140°F 15 (W) DigiTrak FSD Remote Lithium Ion 14-18 N/A 6.2 -4°F to 140°F 9.5 DigiTrak F2 Receiver Lithium Ion 10-14 12, 19 7.7 -4°F to 140°F 15 DigiTrak FSD Remote Lithium Ion 14-18 N/A 6.2 -4°F to 140°F 9.5 DigiTrak SE Receiver NiMH 5-7 12 7.7 14°F to 149°F 15 DigiTrak SED Remote NiMH 8-12 N/A 4.5 14°F to 149°F 8.5 5XD 19/12 Transmitter 2 C-Cell 20 12, 19 1.4 -4°F to 220°F 15 3.6 V Lithium 40 5XD 12/1.3 Transmitter 2 C-Cell 20 1.3, 12 1.4 -4°F to 220°F 15 3.6 V Lithium 40 5X 18.5 Transmitter 2 C-Cell 20 18.5 1.4 -4°F to 220°F 15 3.6 V Lithium 40
K
l
LOCATORS (WALKOVER & UTILITY) Company Model Type Operating Battery Audio Output Weight Operating Overall Voltage Life Frequency (lbs) Temp. Length (hrs) (kHz) (in) DCI 5X 8.4 Transmitter 2 C-Cell 20 8.4 1.4 -4°F to 220°F 15 (W) 3.6 V Lithium 40 FX 19 Transmitter 2 C-Cell 20 19 1.4 -4°F to 220°F 15 3.6 V Lithium 40 FXL 19 Transmitter 3.6 V Lithium 30 19 1.9 -4°F to 220°F 19 FX 12 Transmitter 2 C-Cell 20 12 1.4 -4°F to 220°F 15 3.6 V Lithium 40 FXL Transmitter 3.6 V Lithium 30 12 1.9 -4°F to 220°F 19 FS Transmitter 1 - AA Cell 12 12 0.5 -4°F to 180°F 8 ST Transmitter 2 C-Cell 20 12 1.4 -4°F to 220°F 15 3.6 V Lithium 40 SES Transmitter 1 - AA Cell 12 12 0.5 -4°F to 180°F 8 EDF Transmitter 2 C-Cell 20 12, 1.5 1.4 -4°F to 220°F 15 3.6 V Lithium 40 ET Transmitter 2 C-Cell 20 12 1.4 -4°F to 220°F 15 EXL Transmitter 3.6 V Lithium 30 12 1.9 -4°F to 220°F 19 ECP Transmitter 12 - 28 V DC N/A 12 1.9 -4°F to 180°F 19 ES Transmitter 1 - AA Cell 12 12 0.5 -4°F to 180°F 8 DT Transmitter 2 C-Cell 30 33 1.4 -4°F to 220°F 15 DX Transmitter 2 C-Cell 20 33 1.4 -4°F to 220°F 15 DFT Transmitter 2 C-Cell 20 33, 1.5 1.4 -4°F to 220°F 15 DCX Transmitter 12 - 28 V DC N/A 33 1.2 -4°F to 180°F 15
Ditch Witch 752TKR Tracker Receiver 6 C-cell 20 29, 12 5.5 4°F to 122°F 31.5 (W) 752D Display receiver/displays data 6 C-cell rig pwr N/A 2.2 4°F to 122°F 5.5 86Bv2 Beacon 2 C-cell 40 29 2.75 4°F to 122°F 17.8 86BHv2 Beacon 2 C-cell 20 29 2.75 4°F to 122°F 17.8 86BHDv2 Beacon 2 C-cell 20 29, 12 2.75 4°F to 122°F 17.8 86BHL Beacon 2 C-cell 45 29 6.1 4°F to 122°F 26.5 86BGv2 Grade beacon 3.6V lithium C-pack 60 29 2.2 4°F to 122°F 17.8 88B Beacon 1 AA-alkaline 18 29 6.6 oz 4°F to 122°F 11.5 88BAT Beacon 1 AA-alkaline 22 29 6.6 oz 4°F to 122°F 11.5 8500TK Tracker Receiver 6 C-cell 8 11.2, 1.75 5.5 4°F to 122°F 31.5 8500D Display receiver/displays data 6 C-cell rig pwr N/A 2.2 4°F to 122°F 5.5 850B Beacon 2 C-cell 40 11.2 2.75 4°F to 122°F 17.8 850BH Beacon 2 C-cell 20 11.2 2.75 4°F to 122°F 17.8 850BHD Beacon 2 C-cell 20 11.2, 1.75 2.75 4°F to 122°F 17.8 850BG Grade beacon 3.6V lithium C-pack 60 11.2 2.2 4°F to 122°F 17.8 850S Beacon 1 AA-alkaline 18 11.2 6.6 oz 4°F to 122°F 11.5
Radiodetection DrillTrack G2 Receiver 6 C-alkaline 12 8, 33 8.8 -4°F to 220°F 39.3 (W) RD385 Receiver 12 AA-alkaline 30 8, 33 5.0 -4°F to 220°F 25 SDS: Transmitter 1 AA-alkaline 10 33 0.6 -4°F to 220°F 8 Short range datasonde MDS: Transmitter 2 C-alkaline 20 8 1.8 -4°F to 220°F 15 Medium range datasonde LDS: Transmitter 2 C-alkaline 12 8 1.8 -4°F to 220°F 15 Long range datasonde MDF: Transmitter 2 C-alkaline 20 8, 33 1.8 -4°F to 220°F 15 Medium range dual frequency datasonde LDF: Transmitter 2 C-alkaline 12 8, 33 1.8 -4°F to 220°F 15 Long range dual frequency datasonde G2M: Transmitter 2 C-alkaline 20 8, 33 1.8 -4°F to 220°F 15 Medium range dual frequency datasonde G2L: Transmitter 2 C-alkaline 12 8, 33 1.8 -4°F to 220°F 15 Long range dual frequency datasonde
Ditch Witch 22450GR Ground Penetrating Radar 12V sealed lead acid, 12 Ah > 10 700, 250 MHz 73.9 14°F to 104°F 50 (U) 910R Receiver 6 C-cell alkaline 50 1-200 4.5 4°F to 122°F 12.8 970T Transmitter 8 D-cell alkaline 80 1-200 7.25 4°F to 122°F 14 150R Receiver 2 C-cell alkaline 40 N/A 2 4°F to 122°F 12 150T Transmitter 6 C-cell alkaline 40 N/A 3 4°F to 122°F 12 250R Receiver 6 C-cell alkaline 40 33 5 4°F to 122°F 11.5 250T Transmitter 6 C-cell alkaline 40 33 5 4°F to 122°F 12 950R Receiver 6 C-cell alkaline 50 1-200 4.5 4°F to 122°F 12.8 950T Transmitter 8 D-cell alkaline 40 1-80 7.25 4°F to 122°F 14 980T Transmitter 8 D-cell alkaline 80 1-200 7.56 4°F to 122°F 14 980FT Fault Transmitter 8 D-cell alkaline 70 N/A 7 4°F to 122°F 14 980SFP Fault Detector 2 C-cell alkaline 300 N/A 5 4°F to 122°F 22 830R Receiver 2 D-cell alkaline 75 83 5.1 4°F to 122°F 12.1 830T Transmitter 6 D-cell alkaline 150 83 4.6 4°F to 122°F 11.1 Goldak 5600-SI Pipe/Cable 8 1.5V AA 30 116+/- 03° 3 20°F to 150°F 20.5 (U)
Heath Sure-Lock All Pro Transmitter lead acid 6 VCD, 7 AH 10-100 8.1, 81, 480 8 -25°F to 150°F 9.25 Consultants Sure-Lock All Pro Receiver 6 AA-alkaline 90-120 8.1, 81, 480 4.4 -25°F to 150°F 30.5 (U) Sure-Lock Utility Pro Transmitter 6 D-alkaline 110-190 81 4 -25°F to 150°F 8.1 Sure-Lock Utility Pro Receiver 6 AA-alkaline 90-120 81 4.4 -25°F to 150°F 30.5 Sure-Lock Distance ProTransmitter lead acid 6 VCD, 7 AH 8-40 8.1 5.6 -25°F to 150°F 8.1 Sure-Lock Distance ProReceiver 6 AA-alkaline 90-120 8.1 4.4 -25°F to 150°F 30.5 Magna-Lock Magnetic 6 1.5V AA 100 3 0°F to 120°F 24 Split-Lock Transmitter 4 C-alkaline 50 126 3.5 -5°F to 158°F 8.5 Split-Lock Receiver 4 C-alkaline 50 126 3.5 -5°F to 158°F 8.5
LOCATORS (WALKOVER & UTILITY) Company Model Type Operating Battery Audio Output Weight Operating Overall Voltage Life Frequency (lbs) Temp. Length (hrs) (kHz) (in) McLaughlin Verifier G2 Utility 12V 20 9.5, 38, 80 4.7 -4°F to 122°F 26.8 (U) Verifier Vision FLX Utility/Fault Finder 12V 25 9.5, 38, 80 4.7 14°F to 113°F 26.8
RIDGID SeekTech Receiver 4 C-cell 12-24 10Hz-49kHz 5.4 -4°F to 122°F 31 (U) SR-60 SeekTech Receiver 4 C-cell 12-24 128Hz, 1, 8, 33 4 -4°F to 122°F 31.1 SR-20 ST-33Q Transmitter 6 D-cell varies 8, 33 12.2 -5°F to 125°F 16.06 ST-305 Transmitter 6 alkaline/C-cell varies 1, 8, 33, 262 2.5 -5°F to 125°F 7.75 ST-510 Transmitter 8 D-cell varies-12.5 128Hz, 1, 8, 33 8.9 -5°F to 125°F 15
Schonstedt TraceMaster II Pipe/Cable 8 AA-alkaline 60 0.575, 8, 82, 455 3.9 -4°F to 140°F 29.5 (U) XTpc-82 Pipe/Cable 1 9V 12 82 2.8 -4°F to 140°F 27.7 XTpc-33 Pipe/Cable 1 9V 12 33 2.8 -4°F to 140°F 27.7 Mac-51Bx Pipe/Cable, Mag 2 9V 60 0.575, 82 2.7 -13°F to 140°F 42.3 XT512 Sonde/Camera 1 9V 12 0.512 2.7 -4°F to 140°F 27.7 Ga-92XT Magnetic 1 9V 24 N/A 2.4 -13°F to 140°F 26 Ga-72Cd Magnetic 2 9V 60 N/A 2.5 -13°F to 140°F 34.5 Ga-52Cx Magnetic 2 9V 40 N/A 2.5 -13°F to 140°F 42.3
PIERCING TOOLS Company Model Type Drive Weight Boring Max. Size Cycles/ (lbs) Diameter Bore Pit Minute Range Length (in) (ft) Allied HH-57 pneumatic 31 2.24 40 3 x 5 535 Products HH-68 pneumatic 53 2.68 50 3 x 5 480 Const. HH-68 TH pneumatic 56 2.68 53 3 x 5 480 HH-79 pneumatic 75 3.10 55 3 x 5 440 HH-79 TH pneumatic 80 3.10 58 3 x 5 440 HH-108 pneumatic 169 4.25 67 3 x 6 425 HH-108 TH pneumatic 179 4.25 70 3 x 6 425 Footage U215 pneumatic 23 2 150 3 x 6 400 Tools U262 pneumatic 56 2.5 150 3 x 6 400 U300 pneumatic 75 3 150 3 x 6 400 U400 pneumatic 108 4 150 3 x 6 400
Hammer- 2” AH PP BL SW pneumatic 19 2.00 75 1 x 2.7 714 Head 2” RH SR pneumatic 28 2.00 75 1 x 3.5 470 Trenchless 2” RH PP pneumatic 24 2.00 75 1 x 3 515 Equipment 2” AH PP pneumatic 24 2.00 75 1 x 3 515 2” RH PP BL pneumatic 24 2.00 75 1 x 3 515 2” AH PP BL pneumatic 24 2.00 75 1 x 3 515 2.50” CAT PP pneumatic 50 2.50 100 1 x 3 385 2.50” RH SR pneumatic 50 2.50 100 2 x 4 385 2.50” RH PP pneumatic 50 2.50 100 2 x 4 385 2.50” AH PP pneumatic 50 2.50 100 2 x 4 385 2.50” RH PP SW pneumatic 32 2.50 75 2 x 3 720 3” CAT PP pneumatic 69 3.00 150 2 x 5 370 3” RH SR pneumatic 67 3.00 150 2 x 5 370 3” RH PP pneumatic 67 3.00 150 2 x 5 370 3” AH PP pneumatic 67 3.00 150 2 x 5 370 3” RH PP SW pneumatic 35 3.00 75 2 x 3 720 3.50” AH PP pneumatic 71 3.50 150 2 x 5 370 4” RH SR pneumatic 136 3.875 150 2 x 6 370 5.125” SR pneumatic 214 5.125 150 2 x 6 333 5.50” SR pneumatic 170 5.50 150 2 x 6 370
5.75” SR pneumatic 305 5.75 150 2 x 8 300 7” AR pneumatic 511 7.00 150 2 x 8 295 8” AR pneumatic 900 8.00 150 2 x 10 223 RH-replaceable head; SR-screw reverse; PP-Power Port; AH-Active Head; BL-boltless; CAT- Catamount; SW-Sidewalker; AR-air reverse
Hudco HP200 pneumatic 28 2.0 75 1 x 4 500 HP210 pneumatic 31 2.1 100 1 x 4 500 HP250 pneumatic 56 2.6 100 2 x 4 450 HP300ss pneumatic 50 3.0 75 1 x 4 600 HP310 pneumatic 80 3.1 150 2 x 5 500 HP312 pneumatic 80 3.1 150 2 x 5 500 HP400 pneumatic 136 4.0 200 2 x 6 400 HP525 pneumatic 204 5.2 250 2 x 6 350 HP650 pneumatic 317 6.5 300 2 x 7 300 TT Technologies Grundosteer 70 pneumatic 85 3 200 2 x 7 400 Grundobore 200S pnuematic 794 4-6 N/A N/A N/A P45 Grundomat 1-3/4 pneumatic 20 1-3/4 75 2 x 7 580 P45-PK Grundomat 1-3/4 pneumatic 17 1-3/4 75 1 x 2 680 P55-PK Grundomat 2 pneumatic 27 2 75 1 x 3-1/2 480 P55 Grundomat 2 pneumatic 31 2 75 1 x 3-1/2 480 P65 Grundomat 2-1/2 pneumatic 55 2-1/2 100 2 x 3 460 P65-PK Grundomat pneumatic 41 2-1/2 100 2 x 3 640 P75 Grundomat 3 pneumatic 70 3 150 2 x 5 400 P75-PK Grundomat 3 pneumatic 62 3 100 2 x 4 460 P85 Grundomat 3-1/3 pneumatic 101 3-1/3 150 2 x 5 390 P85-PK Grundomat 3-1/3 pneumatic 84 3-1/3 100 2 x 4 480 P95 Grundomat 3-3/4 pneumatic 150 3-3/4 200 2 x 5 320 P95-PK Grundomat 3-3/4 pneumatic 128 3-3/4 150 2 x 6 360 P100 Grundomat 4 pneumatic 124 4 200+ 2 x 6 320 P100-PK Grundomat 4 pneumatic 124 4 200 2 x 5 400 P110 Grundomat 4-1/4 pneumatic 215 4-1/4 200+ 2 x 6 325 P130 Grundomat 5 pneumatic 258 5 300+ 2 x 6 340 P130-PK Grundomat 5 pneumatic 170 5 200+ 2 x 5 370 P145 Grundomat 5-3/4 pneumatic 370 5-3/4 300+ 2 x 7 310 P160 Grundomat 6-1/4 pneumatic 437 6-1/4 300+ 2 x 7 320 P170 Grundomat 7 pneumatic 573 6-1/4 300+ 2 x 8 280 P180 Grundomat 8 pneumatic 573 7 300+ 2 x 8 280
PIPE FUSION Company Model Input Voltage Req. Min. Power Req. Pipe Diameter Range Wheel/Track (in) Georg Fisher/ 14M 120 VAC/240 VAC 3 KW 3/4” CTS - 4” DIPS opt wheel cart Connectra Fusion 28CQ 120 VAC/240 VAC 4 KW 2” IPS - 8” DIPS opt wheel cart 28HP 120 VAC/240 VAC 4 KW 2” IPS - 8” DIPS wheel 28EP 120 VAC/240 VAC 7 KW 2” IPS - 8” DIPS wheel 414CQ 120 VAC/240 VAC 5 KW 4” IPS - 14” IPS wheel 414HP 120 VAC/240 VAC 5 KW 4” IPS - 14” IPS wheel 414EP 240 VAC 7 KW 4” IPS - 14” IPS wheel 414SC 240 VAC self contained 4” IPS - 14” IPS wheel 620SC 240 VAC self contained 6” IPS - 20” IPS wheel 824EP 240 VAC 3 phase 12 KW, 240V 8” IPS - 24” IPS wheel 1442EP 208 VAC 3 phase Y 40 KW, 208V 3 phase Y 14” IPS - 42” IPS wheel
McElroy MiniMc 100-120V, 50/60Hz, 1Ph 300 Watts ½” CTS - 1” IPS No 200-240V, 50/60Hz, 1Ph 1LC (locking cam) 100-120V, 50/60HZ, 1Ph 100 Watts ½” CTS - 1” IPS No 200-240V, 50/60Hz, 1Ph 2LC (locking cam) 100-120V, 50/60Hz, 1Ph 800 Watts ½’’ CTS - 2’’ IPS No 200-240V, 50/60Hz, 1Ph 2CU (combination unit) 100-120V, 50/60Hz, 1Ph 800 Watts ½’’ CTS - 2’’ IPS No 200-240V, 50/60Hz, 1Ph Pit Bull 14 100-120V, 50/60Hz, 1Ph 2.5 KW 1” IPS - 4” DIPS No 200-240V, 50/60Hz, 1Ph Pit Bull 26 100-120V, 50/60Hz, 1Ph 3 KVA, 2.5 KW 2” IPS - 6” DIPS No 220-240V, 50/60Hz, 1Ph
P
Pit Bull 28 100V, 50/60Hz, 1Ph 4.1 KVA, 3.7 KW 2” IPS - 8” DIPS No 200V, 50/60Hz, 1Ph 4.1 KVA, 3.7 KW 208-240V, 60Hz, 1Ph 3.5 KVA, 3.2 KW 220-240V, 50/60Hz, 1Ph 4.0 KVA, 3.6 KW DynaMc 28 100-120V, 50/60Hz, 1Ph 1.75 KW 2” IPS - 8” DIPS No Hand Pump 220-240V, 50/60Hz, 1Ph DynaMC 28 EP 100-120V, 50/60Hz, 1Ph 3KWA, 2.9 KW 2” IPS - 8” DIPS No (electric pump) 220-240V, 50/60Hz, 1Ph Rolling 28 100V, 50/60Hz, 1Ph 4.1 KVA, 3.7 KW 2” IPS - 8” DIPS wheel 110V, 50Hz, 1Ph 4.0 KVA, 3.6KW 120V, 60Hz, 1Ph 3.4 KVA, 3.2 KW 208V-240V,60Hz, 1Ph 3.5 KVA, 3.2 KW 220-240V, 50/60Hz, 1Ph 4.0 KVA, 3.6 KW TracStar 28 on-board generator self-contained gas 2” IPS - 8” DIPS track Pit Bull 250 240V, 60Hz, 1Ph/220-240V, 50/60Hz, 3Ph 7.8 KVA, 7.8 KW/8.0 KVA, 7.3 KW 63mm - 250mm No 380V, 50Hz, 3Ph 8.0 KVA, 7.4 KW DynaMc 250 220-240V, 50/60Hz, 1Ph 3 KW 63mm - 250mm No Hand Pump DynaMc 250 EP 100-120V, 50/60Hz, 1Ph 3KVA, 2.9 KW 63mm - 250mm No (electric pump) 220-240V, 50/60Hz, 1Ph DynaMC 250 Auto 100-120V, 50/60Hz, 1Ph 3 KVA, 3 KW 63mm - 250mm No Rolling 250 220-240V, 50/60Hz, 1Ph 5.2KVA, 4.8KW 63mm - 250mm wheel TracStar 250 on-board generator self-contained gas 63mm - 250mm track Pit Bull 412 240V, 60Hz, 1Ph 7.8 KVA, 7.8 KW 4” IPS - 12” DIPS No 220-240V, 50/60Hz, 3Ph 8.0 KVA, 7.3 KW 380V, 50Hz, 3Ph 8.0 KVA, 7.4 KW DynaMc 412 220-240V, 50/60Hz, 1Ph 3 KW 4” IPS - 12” DIPS No Hand Pump DynaMc 412 EP 100-120V, 50/60Hz, 1Ph 4.2KVA, 4.2 KW 4” IPS - 12” DIPS No (electric pump) 220-240V, 50/60Hz, 1Ph DynaMc 412 Auto 100-200V, 50/60Hz, 1Ph 3KVA, 3 KW 4” IPS - 12” DIPS No 220-240V, 50/60Hz, 1Ph Rolling 412 220-240V, 50/60Hz, 3Ph 6.2 KVA, 5.8 KW 4” IPS - 12” DIPS wheel on-board generator self-contained gas TracStar 412 on-board generator self-contained diesel 4” IPS - 12” DIPS track Pit Bull 618 240V, 60Hz, 1Ph 7.8 KVA, 7.8 KW 6” IPS - 18” OD No 220-240V, 50/60Hz, 3Ph 8.0 KVA, 7.3 KW 380V, 50Hz, 3Ph 8.0 KVA, 7.4 KW Rolling 618 220-240V, 50/60Hz, 3Ph 8.0 KVA, 7.4 KW 6” IPS - 18” OD wheel on-board generator self-contained gas TracStar 618 on-board generator self-contained diesel 6” IPS - 18” OD track Pit Bull 500 240V, 60Hz, 1Ph 8.8 KVA, 8.8 KW 180mm - 500mm No 220-240V, 50/60Hz, 3Ph 9.0 KVA, 8.3 KW 380V, 50Hz, 3Ph 9.0 KVA, 8.4 KW
PIPE FUSION Company Model Input Voltage Req. Min. Power Req. Pipe Diameter Range Wheel/Track (in) McElroy TracStar 500 on-board generator self-contained diesel 180mm - 500mm track MegaMc 824 220-240V, 50/60Hz, 3Ph 29.8 KVA, 28.1 KW 8” IPS - 24” OD wheel TracStar 630 on-board generator self-contained diesel 8” IPS - 24” OD track MegaMc 1236 220-240V, 50/60Hz, 3Ph 39.4 KVA, 37.7 KW 12” IPS - 36” OD wheel TracStar 900 on-board generator self-contained diesel 12” IPS - 36” OD track MegaMc 1648 220-240V, 50/60Hz, 3Ph 45 KVA, 43.8 KW 16” OD - 48” OD wheel MegaMc 2065 220-240V, 50/60Hz, 3Ph 47.2 KVA, 48.4 KW 20” OD - 65” OD wheel MegaMc 1600 220-240V, 50/60Hz, 3Ph 65 KVA 500mm - 1600mm wheel (20” OD - 65” OD)
Ritmo America RAM 824 All Terrain self contained self propelled 8” IPS - 24” DIPS 4-wheel driv
PIPE JACKING/MICROTUNNELING Company Model Type Weight Boring Max. Size Total Drive (lbs) Diameter Bore Pit Thrust Range (in) Length (ft) (ft) Akkerman TBM 420 * 10,000 51-55 1,000 12 x 20 400T TBM 480 * 5,800 58-62 1,000 12 x 20 400T TBM 48 SC * 15,000 48-52 1,000 12 x 20 400T TBM 540 * 14,500 65-69 1,000 12 x 20 800T TBM 600 * 23,000 72-76 1,000 12 x 20 800T TBM 660 * 20,000 79-83 1,000 12 x 20 800T TBM 720 * 26,280 86-90 1,000 12 x 20 1,200T TBM 780 * 32,300 93-100 1,000 12 x 20 1,200T EX 50 varies 87-170 unlimited 20 x 30 1,200T MTBM SL30 ** 13,000 30-38 500 10 x 14 400T MTBM SL34 ** 16,000 34-42 500 10 x 14 400T MTBM SL36 ** 18,500 36-44 500 10 x 14 400T MTBM SL44 ** 21,500 44-52 1,500 10 x 14 400T MTBM SL46 ** 23,500 48-56 1,500 10 x 14 800T MTBM SL52.5 ** 27,500 52.5-63.5 1,500 10 x 14 800T MTBM SL60 ** 36,000 60-72 1,500 12 x 14 1,200T MTBM SL72 ** 36,000 72-86 1,500 12 x 14 1,200T MTBM SL74 ** 36,000 74-102 1,500 12 x 14 1,200T GBM 240A 4,500 4.25-24 487 10 x 10 100T GBM 308A 6,000 4-25-28.5 487 8 x 8 100T GBM 339A 6,600 4.25-31.5 487 9 x 9 100T GBM 4812A 19,000 4.25-44 487 12 x 12 200T NOTE: Pit size assumes pipe length is 8 ft. *infinitely variable hydraulic; **infinitely variable electric
Herrenknecht BM150DT hydraulic varies 6-11 varies 1.2M 15T BM150D hydraulic varies 6-11 varies 1.5M 25T BM300 hydraulic varies 12-22 varies 2M 75T BM500 hydraulic varies 19.7-38.6 varies 3.2M 160T AVN250 hydraulic varies 14.29-16.34 varies 2M 115T AVN300 hydraulic varies 16.34-22.24 varies 3M 260T AVN400 hydraulic varies 22.24-26.18 varies 3M 260T AVN500 hydraulic varies 26.18-30.12 varies 3M 260T AVN600 hydraulic varies 30.12-34.45 varies 3M 260T AVN700 hydraulic varies 34.45-38.38 varies 3.2M 260T AVN800 hydraulic varies 38.38-43.70 varies 3.2M 260T AVN800 hydraulic varies 43.70-50.98 varies 4.5x3.5M 340T AVN 1000 hydraulic varies 50.98-60.63 varies 4.5x3.5M 340T AVN 1200 hydraulic varies 57.11-72.44 varies 5x4M 340/520T AVN1500 hydraulic varies 72.44-77.17 varies 5x4M varies AVN1600 hydraulic varies 74.01-85.04 varies 5.5x4.5M varies *BM equipment complete with self-contained generator. *BM150DT can be operated from collector sewer. *Other diameters available; open to discussion.
PIPELAYERS Company Model HP Operating Lifting Weight (lbs) Capacity (lbs) Caterpillar PL61 125 37,480 40,000 572R II 240 70,206 90,000 583T 310 100,000 140,000 587T 366 117,000 202,000
Midwestern M510C-JD450/J, CAT D3C/G 75 19,300 10,000 Mfg. M510C-Kom D37EX 85 18,000 10,000 M515C-JD550H/J, CAT D4C/G/K 80 21,300 15,000 M520C-JD650/J, CAT D5C/G/K Case 750K LGP 90 26-28,000 20,000 M520C-Kom D39EX, Case 850K LT\WT 95 26-28,000 20,000 M530C-Kom D41P 105 31,000 30,000 M530C-CAT D5H/M/N 110-120 39,000 40,000 M540C-JD700H/J, LGP, 140 39,000 40,000 CAT D5M/M M540CK-CAT D6K-LGP 125 39,000 40,000 M562C-CAT D6D/D6D-LGP 140 41,500 48,000 M550C-CAT D6M/N 150 45,800 50,000 Kom D61EX M560C-JD750J-LGP, Kom D61 PX 155 46,900 60,000 M571CXL-CAT D7E/F/G 200 64,000 80,000 M572C-CAT D7G-LGP 200 73,000 90,000 M572C-JD 850J-WLT 185 69,500 90,000 M572CXL-JD 850J-LGP 200 70,600 100,000 M583C-CAT D8H/K 300 98,500 140,000 M583CH-CAT D8N/R 305 102,500 140,000 M594C-CAT D9H 410 130,000 200,000 M10R-JD310/410, 76 13,500 10,000 CAT 416/420/426, Case 580 M16R-JD544/644, CAT 928/938 120 23,000 16,000 M33R-CAT 966, Kom WA500-3 220 46,000 33,000 mechanical to hydraulic conversion kits: 561 Conv.- CAT 561B/C/D, MD 6 (9U) 571 Conv.- CAT 571E/F/G, MD 7 (17A) 572 Conv.- CAT 572E/F/G 583 Conv.- CAT 583H/K 594 Conv.- CAT 594G/H RWF 150P 200 37,000 40,000 Industries
Volvo PL4608 315 126,700 176,370 PL4611 315 150,000 242,500 PL3005 112,000 78,350
PIPE LIFTING/HANDLING Company Model Capacity Pipe Diameter Dimensions Weight Carrier Type (lbs) (in) (beam) (lbs) LaValley DD-0310 8,000 3.5-10 84” L; 74” H* 3,000 hydr. excavator Industries DD-0724 20,000 7-24 84” L; 84” H* 3,400 hydr. excavator
Vacuworx MC3 6,600 4-36 3’ 4” L; 2’ 10” H* 900 hydr. excavator, crane, pipelayer, wheel/ track loader RC10 22,000 4-108 8’ 2” L; 3’ 10” H* 2,251 hydr. excavator, crane, pipelayer, wheel/ track loader RC12 26,000 4-108 8’ 2” L; 3’ 10” H* 2,260 hydr. excavator, crane, pipelayer, wheel/ track loader RC16 35,200 4-108 8’ 2” L; 3’ 2” H* 2,604 hydr. excavator, crane, pipelayer, wheel/ track loader RC20 44,000 4-108 8’ 2” L; 3’ 0” H* 2,698 hydr. excavator, crane, pipelayer, wheel/ track loader * w/lug
PIPE RAMMING Company Model Type Weight Boring Max. Surface Drive (lbs) Diameter Bore Launch Range Length (ft) (in) (ft) Hammer- 4” RH SR air 136 2-4 300 2 x 5 Head 5.125” SR air 214 4-8 300 2 x 5 Trenchless 5.50” SR air 170 2-4 300 2 x 5 Equipment 5.75” SR air 305 6-12 300 3 x 30 7” AR air 511 8-20 300 3 x 30 8” AR air 900 8-24 300 3 x 30 12” AR air 1,568 12-30 300 3 x 30 16” AR air 2,701 16-48 300 3 x 30 20” AR air 5,750 20-54 300 3 x 30 24” AR air 9,831 24-72+ 300 3 x 40 RH-replaceable head; SR-screw reverse; AR-air reverse
PIPE RAMMING Company Model Type Weight Boring Max. Surface Drive (lbs) Diameter Bore Launch Range Length (ft) (in) (ft) Poweram 2020 hydraulic 1,300 up to 12 300+ 2’ x 7’ 3” 1425 hydraulic 400 up to 4 100+ 3’ x 4’ 4” 1825 hydraulic 615 up to 6 150+ 3’ x 4’ 2” 1915 hydraulic 1,000 up to 12 200+ 3’ x 6’ 7000 hydraulic 3,400 up to 16 500+ 3’ 6” x 11” 9000 hydraulic 1,500 up to 12 300+ 3’ x 7’ Pow-R 1000A backhoe 320 ½ - 8 150 7-1/2” x 10-1/2 Devices PD4 hydraulic 320 ½ - 6 300 direct 2’ x 4’ PD6 hydraulic 720 ½ - 8 300 direct 2’ x 5’ PD7 hydraulic 1,040 ½ - 10 300 direct N/A PD8 hydraulic 1,920 ½ - 14 300 direct N/A
TT Mini-Atlas air 132 2-8 50 3 x 20 Technologies Titan air 302 8-15 80 3 x 30 Mini-Olympus air 385 4-16 80 3 x 30 Olympus air 507 8-20 115 3 x 30 PCG180 Reversible air 490 8-20 115 Hercules air 811 12-20 130 3 x 30 HV220 Reversible air 945 12-20 130 3 x 30 Mini-Gigant air 1,014 8-24 115 3 x 20 Gigant air 1,356 15-32 165 3 x 30 PCG270 Reversible air 1,540 15-32 165 3 x 30 Koloss air 2,601 20-48 230 3 x 30 Goliath air 5,434 24-56 265 3 x 30 Goliath Reversible air 5,434 24-56 265 Taurus air 10,580 56-78 265 3 x 30 Apollo air 25,000 56-122 300 3 x 30
SKID STEER LOADERS (MINI CRAWLERS/ALL SURFACE LOADERS)
Company Model HP Operating Lift Max. Reach Bucket Wt. (lbs) Capacity (height to pin) Capacity (lbs) (in) (cu. ft.) Bobcat S70 23.5 2,845 700 94.5 5.5-7.9 S100 39.5 4,091 1,000 103.6 6.7-12.8 S130 46 5,235 1,300 109.5 9.6-27 S150 46 5,935 1,500 114.5 14-32.3 S160 56 6,115 1,600 114.5 14-32.3
S175 46 6,220 1,750 118.2 14-32.3 S185 56 6,220 1,850 118.2 14-32.3 S205 61 6,655 2,050 118.2 14-32.3 S250 75 7,825 2,500 128.8 15.4-54.2 S300 81 8,448 3,000 128.8 15.4-54.2 S630 74.3 7,707 2,180 121 15.4-54.2 S650 74.3 8,327 2,690 124 15.4-54.2 S750 85 8,730 3,200 31.5 15.4 S770 92 9,175 3,350 31.5 15.4 S850 92 10,008 3,950 29.7 22.4 A770 92 9,460 3,325 31.5 15.4 Case SR130 43 5,000 1,300 112 11.5-23.7 SR150 49 5,300 1,500 112 11.5-23.7 SR175 57 6,200 1,750 122 13.2-27.9 SR200 70 6,900 2,000 123 13.2-27.9 SR220 76 7,400 2,200 125 14.5-27.9 SR250 84 7,700 2,500 125 14.5-27.9 SV185 57 6,500 1,850 120 11.5-23.7 SV250 76 8,000 2,500 130 14.5-27.9 SV300 84 8,300 3,000 130 14.5-27.9 Caterpillar 216B3 47 5,690 1,400 112 0.47* 226B3 56 5,822 1,500 112 0.47* 236B3 71 7,007 1,950 122 0.52* 242B3 71 7,008 2,150 121 0.47* 252B3 71 7,861 2,650 126 0.52* 246C 73 7,381 2,150 122.9 0.43-0.59* 256C 82 7,566 2,350 122.9 0.43-0.59* 262C 82 7,968 2,700 127 0.43-0.62* 272C 90 8,292 3,250 129 0.43-0.62* Multi Terrain Loaders 247B3 56 6,997 2,150 112 0.52* 257B3 71 8,060 2,675 121 0.52* 277C 82 9,389 3,212** 123 0.37-0.62 287C 82 9,874 3,854** 127 0.48-0.62 297C 90 10,229 4,233** 129 0.48-0.62 *cubic yards **50% tipping load
Ditch Witch SK350 20 1,660 1,030 70.4 4.2 SK500 24 2,270 1,450 81.1 4.2 SK650 31.5 2,630 1,860 81 4.2
John 313 45 5,150 1,260 109 Deere 315 45 5,200 1,500 115 318D 58 6,450 1,800 118 320D 63 6,600 2,000 119 326D 70 8,125 2,600 125 328D 80 8,400 2,800 127 332D 89 8,560 3,200 127
Komatsu SK815-5 54 5,785 1,550 115 15 SK820-5 54 6,480 1,900 118 15 SK1020-5 84 7,573 2,000 122 17 SK1026-5 84 8,068 2,650 128.3 17 New L120 18 2,050 600 93.6 0.17* Holland L125 16.5 2,185 700 93.6 0.2* L150 38 4,500 1,350 115.8 0.38-0.62* L160 46 5,534 1,600 118 0.43-0.71* L170 52 5,540 1,765 118 0.43-0.71* L175 60 6,230 2,000 120.9 0.56-0.71* L180 74 7,130 2,200 126.8 0.62-0.83* L185 82 7,135 2,500 126.8 0.62-0.83* L190 90 7,765 2,800 127.6 0.62-0.83* L213 43 5,000 1,300 112 N/A L215 49 5,300 1,500 112 N/A L218 57 5,860 1,800 120 N/A L220 57 6,400 2,000 121 N/A L223 68 7,380 2,250 129.5 N/A L225 76 7,900 2,500 129.5 N/A L230 84 8,300 3,000 131.1 N/A *cubic yards
Vermeer S400TX 23 1,950 500 22 4-6 S600 30, gas 2,155 600 22 4-6 S600 25, diesel 2,400 600 22 4-6 S600TX 25, diesel 2,660 500 22 4-6 S600TX 30, gas 2,415 500 22 4-6 S800TX 35.1 3,065 840 84.5 6
Volvo MC60B 45.4 5,710 2,900 112.4 MC70B 53.9 5,803 3,370 112.4 MC80B 67.7 6,826 3,970 119.7 MC90B 83.5 6,986 4,120 119.7 MC110B 83.5 7,491 5,880 119.7 MC110C 84 7,476 5,884 125 MC115C 84 7,971 5,884 125 MC135C 92 8,430 5,809 125
TRENCHING MACHINES, CHAIN Company Model HP Max. Digging Max. Digging Operating Wt. Depth (in) Width (in) (lbs) Astec RT60 13 36 6 720 RT130 13 36 6 903 RT160 24 48 8 1,530 TF300B 18.5 45 16 2,450 Maxi Sneaker D 37 36 6 2,601 RT360 32 60 12 3,906 RT600 65 72 16 8,500 RT800 75 72 16 10,000 RT1000 99 84 18 13,500 RT1160 115 84 18 14,000 RT1200 121 84 18 14,000
Ditch RT45 39 63 12 4,200 Witch RT10 13 30 6 951 RT12 16 36 6 1,020 RT24 22.3 48 8 1,120 RT55 60 62 12 5,610 RT80 83 62 12 10,710 RT95 99 97 24 7,980 Hydrostatic RT95 99 97 24 7,980 Powershift HT115 115 97 24 12,000 RT115 115 97 24 7,980 RT115 Quad 11597 24 15,240 HT220 215 96 24 42,990 HT300 300 120 36 70,500 R150 Zahn 15 36 8 1,010 2wd R230 Zahn 23 36 8 1,048 2wd R230 Zahn 23 48 12 1,290 4wd R300 Zahn 30 36 8 1,048 2wd R300 Zahn 30 48 12 1,290 4wd
Rivard RIV153 TC120 175 12 48 28,700 RIV1403 TC1755 387 67 23 70,550
T
TRENCHING MACHINES, CHAIN Company Model HP Max. Digging Max. Digging Operating Wt. Depth (in) Width (in) (lbs) Tesmec TRS-775** 220 96 24 43,000 USA TRS-885** 205 60 18 46,000 TRS-975** 300 120 36 70,500 TRS-985** 335 72 24 78,000 TRS-1150** 440 144 36 117,000 TRS-1150XHD** 440 168 42 116,000 TRS1075** 335 120 36 90,000 TRS-1085** 335 96 28 95,000 TRS-1100** 385 144 36 110,000 TRS-1175XHD** 440 168 42 141,000 TRS-1475** 630 192 48 240,000 TRS-1675** 751 288 72 275,000 M3* 350 144 40 135,000 M5* 440 168 42 161,000 *mechanical design; **hydraulic design
Trench-Tech TT-2350 350 10’ 36 90,000 TT-2450 440 12’ 40 125,000 TT-2550 540 18’ 48 195,000 TT-2650 635 20’ 54 235,000 TT-2850 875 24’ 60 325,000 TT-2950 1,400 30’ 78 375,000
Trencor T765 250 96 30 55,000 T1060 350 144 36 75,000 T1360 440 144 42 138,000 T1460 630 192 54 185,000 T1660 801 144 60 250,000 T1760 950 144 72 325,000 T1860 1,565 420 96 450,000
Vermeer RTX100 13 36 6 1,090 RTX150 20 36 6 1,000 RT450 42 60 12 4,540 RTX550 65 60 12 7,800 RTX750 67 60 12 11,780 RTX1250 120 72 18 11,210 w/tires RTX1250 120 72 18 15,790 w/quad track system RT950 99 72 18 8,160
XTS1250 120 72 18 17,950 T555 III 185 96 24 31,000 T558 III 185 72 24 52,000 T655 III 250 96 26 56,000 T755 III 275 120 36 75,000 T855 III 350 144 36 94,000 T858 III 350 96 30 99,000 T955 III 415 144 42 109,000 T1055 III 415 168 42 124,000 T1155 III 540 192 42 170,000 T1255 III 600 216 48 205,000
TRENCHING MACHINES, ROCKSAW Company Model HP Max. Digging Max. Digging Operating Wt. Depth Width (lbs) (in) (in) Astec Maxi Sneaker D 37 18 3 2,601 RT600 65 28 6 8,500 RT800 75 30 8 10,000 RT1000 99 36, 40 10 13,500 RT1160 115 36, 40, 46 10 14,000 RT1200 121 36, 40, 46 10 14,000
Rivard RIV153 TR63 175 20 6 25,354 RIV153 TR83 175 24 7 28,660 RIV253 TR103 253 32 7 34,172 RIV523 TR200SC 540 36 10 75,000
Tesmec TRS-975 300 48 12 63,000 USA TRS-1075 335 48 12 75,000 TRS-1100 385 54 14 75,000 TRS-1275 540 60 16 150,000 Trencor T1060RS 350 54 14 75,000
Trenchers T1360RS 440 54 14 138,000 and 3600 115 36 6 24,000 Equipment
Vermeer RTX550 65 26 6 10,280 RT950 99 40 12 14,820 RTX1250 120 40 12 20,000 T555 III 185 36 6 32,000 T855RW III 350 54 14 104,000
TRENCHING MACHINES, WHEEL Company Model HP Max. Digging Max. Digging Operating Wt. Depth (in) Width (in) (lbs) Ditch RT55 60 62 12 5,610 Witch RT80 83 62 12 10,710 RT95 99 97 24 7,980 Hydrostatic RT95 99 97 24 7,980 Powershift RT115 115 97 24 7,980 RT115 115 97 24 15,240 Quad
Mid 9200 Magnum 350 7’ 30 55,000 America 9200T 485 9’ 42 85,000 Trenchers
Rivard RIV153 TR63 175 20 6 25,354 RIV153 TR83 175 24 7 28,660 RIV253 TR103 253 32 7 34,172 RIV403 TR200 475 49 15 62,832 RIV523 TR200SC 540 36 10 75,000 RIV523 TR250 540 60 15 70,550
Tesmec TRS-1075 335 96 40 90,000 USA TRS-1175XHD 440 108 54 147,000 TRS-1375 540 108 66 175,000 TRS-1575 630 120 72 242,000 TRS-1675 875 120 93 275,000 Trencor T1360W 440 108 66 138,000
Trenchers 4500 115 4’ 24 22,500 and 4600 115 4’ 24 26,000 Equipment 5500 115 5’ 24 24,500 6500 175 6’ 30 34,000 6600 175 6’ 30 40,000 7500 275 7’ 36 55,000 8500 350 8’ 48 75,000
Trench-Tech TT-2450W 440 8’ 54 125,000 TT-2650W 635 9’ 72 165,000 TT-2850W 875 10’ 84 215,000
Vermeer T655 250 28 109,500
VACUUM EXCAVATORS Company Model Air/ HP Capacity Compressor Vacuum Mounting Water (gal) (cfm/psi) (cfm/Hg) Option AmeriVac MV700 300 650*/1,250** 3,000 16” truck Group MV700T 300 1,300*/1,250** 3,000 16” truck MV1000TW 300 1,300*/1,250** 3,000 16” truck MV1000TD 300 650*/1,900** 3,200 16” truck MV1400 370 1,300*/2,500** 3,200 16” truck *water; **debris
Astec VL15 31 g 150*/100** 600 15” trailer VL25 31 g 250*/100** 600 15” trailer VL55 31 g 550*/200** 600 15” trailer VL85 31 g 800*/500** 600 15” trailer VL130 31 g 1,300*/500** 600 15” trailer 275VacEx 36 d 250*/100** 600 15” trailer/truck/skid 550VacEx 36 d 550*/200** 600 15” trailer/truck/skid 850VaxEx 36 d 800*/500** 600 15” trailer/truck/skid 1300VaxEx 36 d 1300*/500** 600 15” trailer/truck/skid 2000VaxEx 36 d 2000*/500** 600 15” trailer/truck/skid 550HiCFM VaxEx 50 d 550*/200** 1,000 15” trailer/truck/skid 850HiCFM VaxEx 50 d 800*/500** 1,000 15” trailer/truck/skid 1300HiCFM VaxEx 50 d 1300*/500** 1,000 15” trailer/truck/skid 2000HiCFM VaxEx 50 d 2000*/500** 1,000 15” trailer/truck/skid HiCFM = High CFM airflow; *spoils tank; **water tank; g/d = gas/diesel powered
Ditch FX20 water 27 150 N/A 500/15” skid Witch FX25 water 31 500 N/A 540/15” trailer FX30 water 28 500 N/A 500/15” trailer FX30 water 28 800 N/A 500/15” trailer FX60 water 56 300 N/A 900/16” trailer FX60 water 56 800 N/A 900/16” trailer FX60 water 56 1,200 N/A 900/16” trailer GapVax MC Series water 500 up to 2,000*/5-12 cu yd** 3,500 16” HV56 water 500 350-1,200*/15 cu yd** 5,300 28” HV57 500 17 cu yd 5,300 28” HV57 hi-dump 500 17 cu yd 5,300 27” HV44 500 13.5 cu yd 3,850 28” *water tank; **debris body
McLaughlin V100G water 24 100 N/A 575/10” skid/truck/trailer V100D water 25 100 N/A 575/15” skid/truck/trailer V250 water 25 250 N/A 575/15” skid/truck/trailer V500 both 36 500 150/90-110 575/15” skid/truck/trailer V500LT both 36 450 N/A 575/15” skid/truck/trailer V500LTHD both 49 500 N/A 1,025/15” skid/truck/trailer V500LE-LTHD both 49 500 N/A 1,025/15” skid/truck/trailer V500LE-HD both 49 500 N/A 1,025/15” skid/truck/trailer V500LEG both 31 500 N/A 575/15” skid/truck/trailer V500HD both 73 500 N/A 1,025/15” skid/truck/trailer V750 water 24 750 N/A 575/15” skid/truck/trailer V800 both 36 800 N/A 575/15” skid/truck/trailer V800D both 73 800 N/A 1,025/15” skid/truck/trailer V800HD both 73 800 N/A 1,025/15” skid/truck/trailer V800LE both 31 800 N/A 575/15” skid/truck/trailer V800LEHD both 49 800 N/A 1,025/15” skid/truck/trailer V1200 both 36 1,200 N/A 575/15” skid/truck/trailer V1200HD both 73 1,200 N/A 1,025/15” skid/truck/trailer Xtreme both 99 500/800/1,200 N/A 1,200/15” skid,truck/trailer NOTE: Distributed through Vermeer dealers.
Pacific PV-66 15 66 300 14” skid/trailer/truck Tek PV-100 *water 20 100 325 15” skid/trailer/truck PVW-150 water 25 150 525 15” skid/trailer/truck PVW-220 water 25 220 525 15” skid/trailer/truck PV-250 *water 25 250 525 15” skid/trailer/truck PV-350 *water 25 350 525 15” skid/trailer/truck PV-500 *water 25 500 525 15” skid/trailer/truck PV-500DHO *water 38 500 825 15” skid/trailer/truck PV-800DHO *water 38 800 825 15” skid/trailer/truck PV-1200DHO *water 38 1,200 825 15” skid/trailer/truck * =option; NOTE: Air compressor optional on all models.
Ring-O- 275 SJV 36 d 275*/100** 450 14” Matic 550 SJV 36 d 550*/200** 450 14” 550 SJV 36 d 550*/200** 450 14” PTHD 550 SJV 50 d 550*/200** 850 14” HI CFM PTHD 750 SJV 36 d 750*/500** 450 14” 750 SJV 50 d 750*/500** 850 14” HI CFM 750 SJV 50 d 750*/500** 850 14” HI CFM PTHD 1300 SJV 36 d 1,300*/500** 450 14” 1300 SJV 50 d 1,300*/500** 850 14” HI CFM 1300 SJV 50 d 1,300*/500** 850 14” HI CFM PT 275 SJV C 36 d 275*/100** 450 14” skid 550 SJV C 36 d 550*/200** 450 14” skid 750 SJV C 36 d 750*/500** 450 14” 750 SJV 50 d 750*/500** 850 14” skid HI CFM C
V
VACUUM EXCAVATORS Company Model Air/ HP Capacity Compressor Vacuum Mounting Water (gal) (cfm/psi) (cfm/Hg) Option Ring-O- 750 SJV 50 d 750*/500** 850 14” skid Matic HI CFM PTHD C 1300 SJV C 36 d 1,300*/500** 450 14” skid 1300 SJV 50 d 1,300*/500** 850 14” skid HI CFM C 1300 SJV 50 d 1,300*/500** 850 14” skid HI CFM PT C 750 SV 31 g 750* 450 14” 750 SV PTHD 31 g 750* 450 14” 750 SV C 31 g 750* 450 14” skid 750 SV PTHD C 31 g 750* 450 14” skid 1300 SV 31 g 1,300* 450 14” 1300 SV PT 31 g 1,300* 450 14” 1300 SV C 31 g 1,300* 450 14” skid 1300 SV PT C 31 g 1,300* 450 14” skid VL15 31 g 150*/100** 450 14” VL55 31 g 550*/200** 450 14” VL75 31 g 750*/500** 450 14” SJV=Super Jet Vac; SV=Super Vac; PTHD=Pressurized tank & hydraulic full-opening rear door HI CFM= high cfm airflow; *spoils tank; ** water tank; g/d-gas/diesel powered
Rivard VEPA air 270 8.5 cu yd 11.772 cfm 18” truck
Super Mud Dog 650 230 1,000 3,600 16” Products Mud Dog 1000 410 2,000 5,500 28” Mud Dog 1600 410 3,200 5,500 28” Camel Hydroex 350 2,000 3,600-4,500 18” Camel Hydroex 350 3,200 3,600-4,500 18”
Utiliscope VE-75 80 75 850 23” N/A MV-300 80 300 850 23” N/A MV-560 80 560 850 23” N/A MV-800 80 800 850 23” N/A MV-1200 80 1,200 850 23” N/A
Vacmasters System 1000 both 68 300/500 100/150 780/15” truck, trailer System 3000 both 100 300 165/185 1,000/15” truck System 4000 both 155 450/800 300/220 1,000/15” truck System 6000 both 250 950 gal 350/250 1,866/15” SpoilVac water 25 or 35 200/1,200 N/A 476 or 800/15” truck, trailer
Vactor HXX-Positive Displacement 430 1,300 5,300/28” HXX-Centrifugal Fan 380 1,300 HXX-Prodigy 310/330 600 180/150 3,200/16”
Vac-Tron PMD550GT 25 500 4,000 550 trailer/truck/platform/component PMD550DT 36 500 4,000 550 trailer/truck/platform/component PMD550SDT 49 500 4,000 1,000 trailer/truck/platform/component PMD850GT 25 800 4,000 550 trailer/truck/platform/component PMD850DT 36 800 4,000 550 trailer/truck/platform/component PMD850SDT 49 800 4,000 1,000 trailer/truck/platform/component EV150GT 15 150 4,000 300 trailer/truck/platform EV150SGT 25 150 4,000 550 trailer/truck/platform EV150SDT 25 150 4,000 550 trailer/truck/platform CS500GT 25 500 N/A 550 trailer/truck/platform/component CS500DT 25 800 N/A 550 trailer/truck/platform/component MC550DT* 36 500 4,000 550 trailer/truck/platform/component MC550SDT* 49 500 4,000 1,000 trailer/truck/platform/component MC850DT* 36 800 4,000 550 trailer/truck/platform/component MC850SDT* 49 800 4,000 1,000 trailer/truck/platform/component MC150SGT** 25 150 4,000 550 trailer/truck/platform MC150SDT** 25 150 4,000 550 trailer/truck/platform
WHEEL LOADERS Company Model HP Operating Standard Operating Tip Load Travel Wt. (lbs) Bucket Load (lbs) Speed (cu. yds.) (lbs) (mph) Case 21E 50 10,173 0.73-1.05 3,228 7,344 12.4 121E 60 10,849 0.85-1.18 3,397 7,673 21.7 221E 69 11,947 0.85-1.31 4,001 9,358 21.7 321E 77 12,676 1.09-1.44 4,139 9,744 21.7 621EXR 146 27,406 2.56-2.32 8,089 22,795 24 721F 144 31,510 2.53-3.25 11,686 26,696 23.5 821F 178 38,875 2.90-3.54 13,871 32,009 22.8 921F 185 43,778 3.41-4.08 16,002 37,190 22.4 1021F 262 53,791 3.87-4.75 17,661 42,293 23.2 1121F 284 59,578 5.06-6.25 19,756 46,627 23.2 1221E 320 66,930 7.3-9.2 23,645 55,060 21.1
Caterpillar 904H 52 9,900 0.8 2,756 6,614 12.4 950K 212 42,068 3.25-12 23.6 962K 224 44,255 3.25-12 23.6 966K 270 51,927 3.25-12 23.2 972K 291 56,391 3.75-13 22.9 980K 369 66,823 5.25-16 22.4 906H 70 12,412 1.2 6,393 21.7 907H 70 12,809 1.3 6,989 12.4 908H 80 14,253 1.4 7,264 21.7 914G 96 17,530 1.7 11,737 22
IT14G 96 18,632 1.7 10,566 22 924H 128 25,644 2.4 16,041 24.7 924Hz 128 24,180 2.3 16,844 24.7 928Hz 143 27,699 2.6 19,089 23.4 930H 149 28,725 2.6 18,321 24.7 938H 180 34,125 3.5 22,418 24.1 IT38H 180 36,016 3.5 21,269 24.1 950H 196 40,435 4.0 24,068 23.0 962H 211 42,700 4.5 26,676 23.6 IT62H 211 42,770 4.25 25,865 23.6 966H 262 52,254 5.5 34,120 23.2 972H 287 55,451 6 37,271 22.9 980H 318 67,294 7 42,989 22.6 988H 501 109,249 9 25,000 64,745 22.3 990H 627 171,642 11 33,000 84,311 13.0 992K 801 214,948 14 42,000 113,159 12.8 993K 950 294,800 17 50,000 158,026 13.6 994F 1,463 430,858 25 76,000 250,188 14.0
Doosan DL160 106 19,246 2.0 14,330*/11,680** 21.0/13.4 DL200 143 24,912 2.6 19,555*/16,667** 21.7/15.5 DL200TC 143 25,574 2.6 18,913*/16,272** 21.7/15.5 w/2.6 yd bucket DL200HL 143 26,323 2.6 16,795*/14,661** 21.7/15.5 DL220 143 27,205 3.0 22,220*/19,282** 23.0/16.0 DL250 162 30,865 3.3 26,896*/22,487** 21.1/14.6 DL250TC 162 32,243 3.4 20,765*/17,073** 21.1/14.6 w/3.4 yd bucket DL250HL 153 32,108 3.4 25,342*/21,114** 21.1/14.6 DL300 220 38,493 4.2 31,967*/26,676** 21.4/21.4 DL350 232 43,358 4.8 33,768*/29,817** 21.4/13.3 DL420 280 49,383 5.5 39,432*/34,240** 23.6/11.8 DL450 287 56,165 6.3 43,973*/37,507** 23.6/23.6 DL500 335 66,017 6.8 50,706*/44,092** 21.7/21.7 *tip load (straight frame), **tip load (full turn); travel speed is foward/reverse
Hyundai HL730-9 123 21,600 2.5 17,420*/15,210** 23.2/14.6 HL730XTD-9 123 22,050 2.5 15,700*/13,520** 23.2/14.6 HL730TM-9 123 22,490 2.2 14,881*/12,786** 23.2/14.6 HL740-9 143 26,460 3.0 21,160*/18,300** 24.3/15.6 HL740XTD-9 143 27,100 3.0 18,920*/16,400** 24.3/15.6 HL740TM-9 143 27,780 3.0 17,530*/15,430** 24.3/15.6 HL757-9 170 32,000 3.7 24,910*/21,380** 23.5/15.0 HL757XTD-9 170 33,000 3.7 21,780*/18,780** 23.5/15.0 HL757TM-9 170 33,000 3.5 20,940*/17,970** 23.5/15.0 HL760-9 212 39,460 4.3 30,510*/26,680** 23.7/15.7 HL760XTD-9 212 41,230 4.3 26,900*/23,150** 23.7/15.7 HL770-9 277 50,930 5.5 38,850*/33,710** 25.5/16.8 HL770XTD-9 277 52,580 5.5 34,990*/29,630** 25.5/16.8 HL780-9 344 66,100 7.1 53,350*/46,300** 22.7/15.6 HL780XTD-9 344 67,900 7.1 47,400*/40,790** 22.7/15.6 *tip load (straight frame), **tip load (full turn); travel speed is foward/reverse John 344J 98 18,408 2.0 17,310 12.522 18.6/18.6 Deere 444K* 117 24,372 2.5 18,104 17,796 22.4/15.7 524K**** 128 33,887 4.0 17,701 20,144 22.4/15.0 524K* 128 27,077 2.75 20,267 19,698 22.4/15.0 544K**** 145 35,408 5.0 18,262 20,658 22.4/15.1 544K* 145 28,263 3.0 24,251 20,961 22.2/15.0 624K**** 170 39,254 6.0 21,300 22,255 24.6/16.0 624K* 170 33,477 3.5 28,483 26,524 24.6/16.0 644K**** 199 48,142 7.0 26,043 26,450 24.9/17.9 644K* 199 40,406 4.25 33,903 28,393 24.9/17.9 724K**** 223 50,288 7.0 26,043 29,827 22.1/15.1 724K* 223 42457 4.75 31,742 31,155 22.1/15.1 744K* 265 53,674 5.25 42,805 37,360 24.9/21.5 744K**** 288 65,049 8.0 32,691 39,512 24.9/21.5 824K* 293 57,783 6.0 41,678 38,775 24.9/21.1 844K* 347 70,629 7.25 47,860 44,136 25.0/19.1 444K** 117 24,621 2.5 16,656 15,091 22.4/15.7 524K** 128 27500 2.75 22,394 16,693 22/15.0 544K** 145 28426 3.0 22,395 17,789 22/15.0 624K** 170 33,773 3.5 25,884 21,949 24.6/16.0 644K** 199 41215 4.25 30,384 23,165 22.7/15.5 724K** 223 42,947 4.75 28,590 24,740 22.1/15.1 744K** 288 54889 5.25 38,433 29,319 24.9/18.6 824K** 293 58,618 6.0 39,570 32,386 24.9/18.7 444K*** 117 26,619 2.0 13,352 13,726 22.4/15.7 544K*** 145 29,687 2.5 19,684 18,715 23.8/15.0 624K*** 170 36,275 3.0 23,719 23,840 24.6/16.0 624K Tool Carrier 170 34,169 3.5 24,202 23,675 24.6/16.0 644K*** 199 44,005 4.0 26,519 24,364 22.7 *Z-bar; **High Lift; ***Powerllel w/Coupler; ****Waste handler; tip load is full turn; travel speed is forward/reverse
Komatsu WA50-6 38.6 8,100-8,430 0.78 2,106 5,400 9.3 WA70-6 60.1 11,100-11,860 0.98-1.63 2,997 9,427 12.4 WA80-6 67 12,180-12,864 1.05-1.63 3,510 9,628 12.4 WA100M-6 88.8 15,157-15,829 1.37-2.4 4,401 12,897 12.4 WA150-6 98 17,262-17,450 1.7-2.2 5,400 14,873 23.6 WA200-6 126 23,160-23,457 2.2-3.1 7,020 21,363 23.6 WA200PZ-6 126 25,275-25,420 2.5-2.75 6,875 17,955 23.6 WA250-6 138 25,441-25,904 2.5-3.5 8,100 23,215 23.6 WA250PZ-6 138 26,808-27,778 2.5-3.0 7,800 19,676 23.6 WA320-6 167 31,590-32,070 3-4.2 9,990 27,635 23.6
WHEEL LOADERS Company Model HP Operating Standard Operating Tip Load Travel Wt. (lbs) Bucket Load (lbs) Speed (cu. yds.) (lbs) Komatsu WA320PZ-6 167 32,480-33,900 3.25-3.5 9,450 24,228 23.6 WA380-6 191 38,760-39,600 3.8-5.2 11,610 32,100 21.1 WA430-6 231 40,840-41,226 4.1-5.6 12,420 32,981 23.1 WA470-6 272 51,850-52,150 5-6.68 14,850 42,935 22.5 WA480-6 299 55,920-56,340 5.4-8 16,200 46,130 22.6 WA500-6 353 71,585-74,010 5.9-8.2 20,440 52,030 24.1 WA600-6 527 118,385-118,825 8.49.2 23,940 80,645 23.4 WA800-3 808 224,650-230,380 14.4 43,200 134,680 17.4 WA900-3 856 236,340-236,670 17 51,000 144,780 17.4 WA1200-3 1,560 452,390-470,200 26.2 79910 264,100 12.3 Kubota R420S 43 7,450 0.5 1,925 3,850 12.5 R520S 49 8,980 0.75 2,205 4,410 12.5
New Holland W50B TC 51 10,173 0.92 7,377 3.1/12.4 W80BTC 72 12,727 1.44 9,741 3.7/12.4 W110B 136 23,804 2.0 23,220 16,652 3.8/22.3 W110BLR 136 24,177 2.0 19,294 13,988 3.8/22.3 W110BTC 136 25,678 2.0 21,044 15,138 3.8/22.3 W130B 162 28,127 2.56 25,806 21,410 4.3/24.0 W130BLR 162 28,830 2.56 24,764 17,872 4.3/24.0 W130BTC 162 28,709 2.66 31,516 19,690 4.3/24.0 W170B 183 31,100 3.0 29,108 24,724 4.7/23.5 W170BLR 183 31,100 3.0 29,108 20,763 4.7/23.5 W170BTC 183 31,100 3.0 29,108 24,724 4.7/23.5 W190B 213 37,844 3.44 35,563 29,154 4.4/23.0 W190BLR 213 39,045 3.44 27,081 23,120 4.4/23.0 NOTE: travel speed is forward/reverse
Volvo L40B 94 17,417 10,252 12.4/12.4 L45F 98 19,070 11,949 12.4/12.4 L50F 115 20,790 12,677 12.4/12.4 L60F 154 24,250-27,120 2.2-6.5 15,520 26.8/26.8 L70F 168 28,000-30,860 2.6-8.4 17,520 27.7/27.7 L90F 172 33,070-37,480 3-9.2 21,100 28.7/28.7 L110F 227 39,730-41,950 3.7-12.4 24,840 23.0/23.0 L120F 240 42,190-43,880 4.4-12.4 26,770 23.0/23.0 L150F 280 41,520 4.1-15.7 33,700 22.4/22.4 L180F 314 58,510 4.8-18.3 40,270 22.4/22.4 L220F 347 69,090 5.9-18.3 45,750 22.4/22.4 L350F 528 66,140-77,160 8.1-16.6 77,320 22.2/23.7 L150G 295 50,000-55,000 4.1-15.7 38,493 26/38 L180G 330 58,000-61,000 5-18.3 44,114 26/38 L220G 367 70,000-73,000 5.9-18.3 47,972 25/38 L250G 389 74,600 6.7-13.3 49,440 NOTE: tip load is full turn; travel speed is forward/reverse

Documents

Equipment Selection Guide