4
European Supporter Vessel Specification Sheet Multi-Purpose DP2 Support Vessel The CS European Supporter is a 106m multi-purpose DP2 cable installation vessel which can perform a variety of installation, handling, burial and cable protection tasks for the Offshore Renewables, Telecommunications and Oil and Gas sectors. The cable installation systems have been specifically designed to facilitate a wide range of inter-array and telecommunications cables. The main cable-handling machinery is housed inside the hanger-deck providing a safe and comfortable environment for the operation and maintenance of the cable equipment. A dedicated ROV hanger is located on the port side which can house a work-class ROV and associated launch and recovery systems. Trenching equipment, jetting ROVs and cable burial ploughs can be handled by the stern-mounted A-Frame. Key Vessel Features and Capabilities ROV Hanger Accommodation for 59 persons total 5,000 tonne under deck cable capacity Power cable loading arm 30 tonne A-frame A telecoms cable jointing space and associated Test Room are situated in the hanger Spare cable tanks (telecoms) and plentiful rope storage tanks A 60t SWL active heave compensated crane A 50t SWL tow winch is fitted below the aft working deck Global Maritime Excellence

European Supporter - P&O Maritime Supporter - MEAE - Euro… · European Supporter Vessel Specification Sheet Multi-Purpose DP2 Support Vessel The CS European Supporter is a 106m

  • Upload
    dotruc

  • View
    285

  • Download
    0

Embed Size (px)

Citation preview

Page 1: European Supporter - P&O Maritime Supporter - MEAE - Euro… · European Supporter Vessel Specification Sheet Multi-Purpose DP2 Support Vessel The CS European Supporter is a 106m

European SupporterVessel Specification Sheet

Multi-Purpose DP2 Support VesselThe CS European Supporter is a 106m multi-purpose DP2cable installation vessel which can perform a variety ofinstallation, handling, burial and cable protection tasks for theOffshore Renewables, Telecommunications and Oil and Gassectors.

The cable installation systems have been specificallydesigned to facilitate a wide range of inter-array andtelecommunications cables. The main cable-handlingmachinery is housed inside the hanger-deck providing a safeand comfortable environment for the operation andmaintenance of the cable equipment.

A dedicated ROV hanger is located on the port side which canhouse a work-class ROV and associated launch and recoverysystems. Trenching equipment, jetting ROVs and cable burialploughs can be handled by the stern-mounted A-Frame.

Key Vessel Features and Capabilities� ROV Hanger

� Accommodation for 59 persons total

� 5,000 tonne under deck cable capacity

� Power cable loading arm

� 30 tonne A-frame

� A telecoms cable jointing space and associated Test Room are situated in the hanger

� Spare cable tanks (telecoms) andplentiful rope storage tanks

� A 60t SWL active heave compensated crane

� A 50t SWL tow winch is fitted below the aft working deck

Global Maritime Excellence

Page 2: European Supporter - P&O Maritime Supporter - MEAE - Euro… · European Supporter Vessel Specification Sheet Multi-Purpose DP2 Support Vessel The CS European Supporter is a 106m

European Supporter

GeneralShip Name European SupporterType Multi-Purpose Cable LayerOwner Eidesvik Shipping ASOperator P&O MaritimeBuilt 1996Builder Flekkefjord Slip & Maskinfabrikk AS,

NorwayClassification Det Norske Veritas - ✠ 1A1, SF EO

DYNPOS-AUTR DK (+)Port of Registry Douglas Flag Isle of ManIMO Number 9126584Call Sign 2DYQ5

Main CharacteristicsLength O.A 105.6mLength B.P 94.5mMoulded Breadth 22.0mMoulded Depth 8.6mSummer Draft 6.791mFreeboard 1.859mGross Tonnage 9227 tonnesNet Tonnage 2769 TonnesLightship 4994 tonnesDeadweight 6117 tonnesSpeed Max 17 kntsService Speed 14 kntsEconomical Speed 9 kntsEndurance 60 Days between portsBollard Pull 97t

AccommodationTotal Capacity 59Single Cabins 24Double Cabins 18Hospital 1

Available Deck SpaceAft Deck 400m2

Below Aft Deck 390m2

Cable Hanger (Main Deck) 680m2 (Covered)ROV Hanger 70m2

Container Capacity 7 x 20ft ISO Containers

Main EquipmentMain Engines 2 x Wärtsilä Wichmann 12 V 28 B, 12

cylinder - 2 stroke, 3960kW (5385bhp)@ 660 rpm

Electrical Output 3 Phase, 440V, 60HzMain Generators 2 x Leroy Somer Shaft Alternators NRW

54 M 9, 2950 kVA (2360 kW), 440v, 60HzAuxiliary 1 x Mitsubishi S12R-MPTK, Stamford Generators HCM734G2, 1499 kVA (1270 kW) 440V,

60Hz1 x Volvo TAMD 162c, Stamford MHC 534C, 450 kVA (360 kW), 440V, 60Hz

Emergency 1 x Volvo TAMD 162c Stamford MHCGenerator 534C, 450kVA (360 kW), 440V, 60HzReduction 2 x Wärtsilä Wichmann SCV 750Gearboxes Gearboxes 660 to 146 RPMBow Thrusters 1 x Brunvoll FU80-LTC-2000 1200 kW

(1632 HP) Tunnel ThrusterStern Thrusters 2 x Brunvoll FU63-LTC-1750 736 kW

(1000 HP) Tunnel ThrusterAzimuth 2 X Brunvoll AR63-LNC-1650 880 kWThrusters (1200 HP) Retractable Azimuth ThrusterMain Propellers 2 x Warsilla Wichmann Controllable

Pitch Propellers (3900mm Diameter)Rudders 2 x Becker Rudders

Fuel Consumption*Full Speed 20m3 per dayService Speed 12m3 per dayDP Mode 10m3 per dayHarbour Mode 3m3 per day

SPECIFICATION SUBJECT TO CHANGE WITHOUT NOTICE *All performance figures quoted are nominal, actual dependant on prevailing environmental conditions at time of operation.

Page 3: European Supporter - P&O Maritime Supporter - MEAE - Euro… · European Supporter Vessel Specification Sheet Multi-Purpose DP2 Support Vessel The CS European Supporter is a 106m

Deck Machinery Main Crane TTS Offshore Crane, 60T SWL Active

Heave Compensated, Knuckle Boom, 360° rotation, 2052m wire, 23mRadius

Provisions Crane Hydralift MCV 886-2-10, 2T SWL, 10m Radius

Stores Crane Hydrmarine 2T SWL, 7m Radius A-Frame Soil Machine Dynamics, 30T SWL, 12m

Height, Towing Tension 50tBuoy Handling 2 x 10T SWLDavitts

Dynamic Positioning SystemDP System Kongsberg KPOS DP – 22Positional Kongsberg HIPAP 500 (High References Precision Acoustic Positioning) with

2000m rated beaconsKongsberg HPR (HydroacousticPosition Reference)Dynamic GPS - Kongsberg Seatex DPS 132, Kongsberg Seatex DPS 232Fanbeam SystemKongsberg RADius 1000

Taut Wire System Kongsberg Light Weight Taut WireSystem MK 15/300

Gyro Compasses 3 x Sperry Navigat Mk 1 Motion Reference Units 2 x MRU type 2 + 1 x MRU type 5Wind Sensors 2 x Wind Gill + 1 x Wind Sensor OMC

Other MachineryROV Hanger 70m2 floor area. Seating for ROV LARS,

Winches and ancillary equipment.Facilities for Work Class ROV and 2 x 20ft containers. 5m wide and 9.5mhigh clear opening (roller shutter door). Air supply 6.9 Bar. Fresh water supply.

Towing Winch 3500mm of 40mm Dia Wire CableHaul Force - 350kN (Top Layer)Haul Speed - 30m/min @ 100kN(Mid Layer)Rendering Force - 100-500kNRendering Speed - 60m/min @ 100-500kN

Capacities Fuel Oil 1746 m3

Ballast 2978 m3

Fresh Water 464 m3

Page 4: European Supporter - P&O Maritime Supporter - MEAE - Euro… · European Supporter Vessel Specification Sheet Multi-Purpose DP2 Support Vessel The CS European Supporter is a 106m

P&O Maritime Tel: + 353 91 773980Parkmore Business Park West, Fax: + 353 91 393656Galway, Email: [email protected]. www.pomaritime.com

Global Maritime Excellence

Cable EquipmentLinear Cable Engine Normarine Hydralift 20T

Capacity25T Drum Winch - 6m/s haul rate1 x 6T DOHB (Hold Back) Winch2 x 1.75T DOHB Winch (Transportable)2 x 10T Deck Capstan

Cable Trackway Minimum Bend Radius = 3mMinimum Drop Height = 6.2mWorking Height = 1200mm

Power Cable Loading 1 x Parkburn electricity driven -Arm Capacity up to 200mm diameter

cable up to 50kg/mFibre Optic System 4m Diameter cable drum with

fleeting knives plus fleeting rings.1 x 25t Hydramarine Cable DrumEngine

Recovery Winch 25 tonne haul @ 6m/s

Spare Cable TankQuantity 1Max. Loading 200 TonneInternal Diameter 10mCone External Diameter 3.0mTank Height 4.6mCone Height 3mVolume 365m3

Main Deck Below Main DeckMain Cable TanksQuantity 2Max. Loading Power Cable - 2000 tonnes per tank

Fibre Optic - 2500 tonnes per tankInternal Diameter 17.5mCone External 4mDiameterTank Height 7.56mCone Height 5.8mVolume 1820 m3 per tank

Deck ServicesWater Supply (SW) 2.5m3/min @ 7 barAir Supply 6.9 bar @ 400scfmElectrical Supply 110V 60Hz Single Phase

220-440V 50-60Hz Three Phase