Address: No.721, Phase 2 .Industrial zone 2, Andimeshk Road post code 6348134339, Ahwaz, Iran

Tel. NO: 0098-61-33375603

WEB: WWW.FALIZ-FACTORYWIRELINE.COM

MAIL:HOSSAINPANAH@FALIZ-FACTORY.COM

The Faliz’s goals are preparation and manufacture of spare parts and equipment for Khozestan Steel Co(

K.S.C),National Iranian Oil Co( N.I.O.C), National Iranian Gas Co.(N.I.G.C), National Iranian Petroleum

Co.(N.I.P.C)& National Iranian Digging Co.( N.I.D.C). This company registered with number 24016 in Ahwaz’s

registration companies’ office. Faliz located in number 721, zone 2, Industrial town 2.

The main goals of this company are purchasing, engineering, manufacturing and installation equipment for

K.S.A, N.I.O.C, N.I.G.C, N.I.P.C & N.I.D.C.

This company have effective performance with more than 10 years experiences, using from business part (internal

and external), programming and project’s control, technological, designing and engineering, quality’s guarantee,

management of projects for purchasing , engineering, manufacturing & installation of industrial spare parts for

factory. This company performing very important role in economize and with this company K.S.C, N.I.P.C, N.I.G.C

& N.I.D.C don’t belong to abroad.

This company with the implementing of the requirements of ISO got the IMS in design and production of industrial

equipment. Faliz with this degree give confident for quality of product to its client.

Activities:

Technical, engineering and overhaul service:

Reverse engineering of equipment and supplier of manufacture plan

Designing and manufacturing of mechanical and industrial hydraulic equipment

Offering special services for equipment and overhauling based on factory’s ISO

Supplier and exchanging of all hydraulic connectors based on ISO

Supplier and exchanging of all hydraulic filters with different brands.

Designing, fault detection and exchanging of central grease lubrication

Testing and calibration of instrumentation and hydraulic equipment

Supplier of spare parts and completion of industrial piping projects

Designing and manufacturing of hydraulic unites

Designing and supplier kind of heat exchangers(PLATE HEAT EXCHANGER, SHEL & TUBE)

Offer special services (Condition Monitoring)

Analysis oil and measuring of pollution, particle attrition and water that exist in oil of hydraulic systems

Analysis of equipment’s vibration specially compressor and electronics pump

Analysis and measuring of weather and water’s pollution based on ISO

Offer training services

Offering all training terms that necessary in different industry like mechanic, hydraulic, electricity &

electronics.

Detective of equipment’s manufacturing and assembling

This company providing all of the facilities for offering service to factories with detective of equipment’s repair(an

area of 700 m), detective of assembling (an area of 700 m) and detective under construction for assembling and

repairing of weight equipment ( an area 2000 m)

TURNING WORKSHOP

Faliz Pajouhesh Pars Co. with experienced and expert personnel

and technical facilities always ready to offer services like turning,

milling and casting for all of the industrial spare parts with best

quality and best cost.

Manufacturing of machines and equipment

Faliz pajohesh with construction of logging camion, considers Iranians talent to world and they can participate in

agreement like construction of SKID, Wire line unites and MWD cabin .The engineers of this company showed

their abilities in previous projects. Hiring employees with high technical knowledge create young team that work

with skillful engineers and they try to respond all industry’s demand.

DESIGNING, MANUFACTURING AND INSTALLATION OF EVERY KIND OF VESSELS.

Pressure vessels

Storage vessels

Spherical vessels

Aerial vessels

Experienced and trained personnel with utilization of international ISO designing and manufacturing every kind of

steel vessels, pressure vessels, aerial vessels, distillation, storage vessels, spherical vessels, titanium vessels, heat

exchangers and… in this company.

This company gives confidence to customers for high quality of its vessels.

DESIGNING, MANUFACTURING AND INSTALLATION OF EVERY KIND OF INDUSTRIAL

STRUCTURS:

Faliz pajouhesh pars industrial group with 15 years’ experience in manufacturing and designing every kind of

structures prepare to offer following services:

Every kind of slope and arches sole

Sole with unique designing and without foundations

Every kind of metal structure

Every kind of tower’s metal frame

Every kind of metal bridge

Manufacture all kind of steel spare parts and equipment for cement factories

Manufacture every kind of pressure vessels and another types of vessels

Manufacture every kind of steel vessels for food industry

Performance every kind of ceiling cover

Sale and purchase of every kind of used sole

DESIGNING, MANUFACTURING AND INSTALLATION EVERY KIND OF TRUCK AND STEEL CABIN

Production and manufacture every kind of truck with 12-44 m3 capacity

Production and manufacture every kind of articulated vehicles with 40-100 ton

Production and manufacture every kind of flat truck with various dimension

Production and manufacture every kind of transit according to Europe ISO

Production and manufacture every kind of truck with mobile room and fixed room

Manufacture of refrigerator room with capability to installation on species truck

Production and manufacture every kind of metal room for load

Manufacture every kind of metal cabin with internal installation for military industry

Manufacture every kind of metal structure

Faliz Pajouhesh Pars Co. with experienced and expert personnel , technical facilities, offering of consulting

services and technical inspection always ready to resolve need of different industry and base of them move to

design and constructing of crane.

We should consider the following notes for constructing crane:

1- Type of crane and function of it (overhead crane, gantry crane, jib crane &…)

2- Numeral and time of lading

3- Maximum of displaced weight

4- Suitable work and life time

5- Figure of lading & size of cargo

6- Place situation and specific situation

OIL PIPELINES AND OIL PRODUCTS

Faliz Pajouhesh Pars via cooperation in infrastructures project like oil, gas, petrochemical, water and waste water

and with usage expert and technical knowledge of young experienced engineers step on the way of development

and according to this goal with regards to responsibility and trust in work and strategic programming have effort

in all over the country.

Faliz Pajouhesh Pars have 1 lost foam casting line and 2 full automatic molding lines for producing every kind of

cast iron spare parts in small, medium and large sizes.

Testing and calibration of instrument and hydraulic equipment

One of the main problem of industry in Iran is lack of machine for testing equipment especially instrument

equipment and hydraulic systems. In most cases equipment after repair, install in previous place and machine,

become equipment for testing itself. In this case, each of unsuitable function from handling, pump and… can make

big problems and company should spend much money, but this company supply calibration facilities for testing

simple hydraulic handling, pump and…

1) Internal business

Business parts

2) External business

This company have ability to supply, transport and delivery all of the industrial equipment for Iran’s factory with

its offices in Dubai, Norway and China. This company has direct communication with manufacturer of industrial

equipment in abroad.

This equipment supply with suitable price and it’s delivery at factory.

Some of the company that Faliz Pajohesh can supply their objects and materials:

CATERPILAR ,PERKINS ,KSB, REXROTH ,HYDAC ,DROPSA ,DELIMON,STAUFF , ABB , CYLYDUNION

,NOV, RANDRAL HYDRAULIC ,OMRON ,TESLA MOTORS

KSB (Made in Germany):

Supplier of water and other liquid handling accessories:

Pumps,

REXROTH (Made in Germany and USA)

Supplier of Industrial Hydraulic equipment and accessories: Pumps, Hydro motors, Valves

Pumps, Hydro motors, Valves, Accumulators,…

HYDAC (Made in Germany)

Supplier of Hydraulic Filters, Accumulators and accessories:

Pressure line Filter, Return Line Filter

DROPSA (Made in Italy) is Supplier of Central Grease Lubrication and Air-oil systems.

Delimon (Made in Germany) is Supplier of Central Grease lubrication systems.

Grease Pump, Distributor, Connections and accessories

STAUFF (Made in Germany)

Supplier of Fluid Connectors

TELEMACHANIC & OMRON & TESLA MOTOR

Some of the in progress projects:

1) Manufacturer of 4 logging skid unit for Iraq co.

2) Repairing and reconstruction of Draw Woks for N.I.D.C

3) Repairing and reconstruction of 6 pump truck for N.I.D.C

4) Repairing and reconstruction of mast truck wire line for china co.

5) Manufacturer of cementing panel instrument for N.I.D.C

6) Manufacturer of portable devices machines

7) Manufacturer of Re Spooler for collecting logging cable

8) Manufacturer of 2 wellhead pressure control unit machines for N.I.D.C

9) Manufacturer of 2 logging truck machines for N.I.D.C

10) Manufacturer of 2 non zone skids for N.I.D.C

11) Manufacturer of 4 pumping cement and acid machine for N.I.D.C

12) Logging truck for N.I.D.C

13) Manufacturer of 4 pumping cement truck machine for N.I.O.C

Some of the finished Projects:

1) Manufacturer of 2 zone II skids for first time in Iran for N.I.D.C

2) Repairing and reconstruction of 3 logging camion machines for first time.

3) Reconstruction of 3 B 3176 caterpillar motor machines for logging camion

4) Overhauling and reconstruction of 2 DT 466 international motor machines

5) Overhauling and reconstruction of 3 truck pump machines of digging and repairing of 2 C15 caterpillar

motor machines

6) Construction of 1 non zone skid machine for N.I.D.C for first time in Iran

7) Repairing and overhauling of 1 E-2000 Draw works for N.I.D.C for first time in Iran

8) Reconstruction and overhauling and changing system of 1 crane and repairing of 2624 Benz motor for

N.I.D.C

9) Manufacturer of cementing panel instrument truck

10) Manufacturer of 10 wheels truck logging machine for first time in Iran

11) Manufacturer of 3 skids for CNPC co. for using in petroleum field

12) Supplying Custer geothermal device for N.I.D.C

13) Manufacturer of wire line machine for N.I.O.C and N.I.G.C

14) Purchasing 2 survey wire line for marine operations of N.I.D.C

15) Kind of pump and handling accessories from REXROTH CO. for ARPCOSTEEL co. and Neopan co.

16) Supplying kind of pump, hydro motor and hydraulic handling accessories and special handling accessories

and well head equipment from REXROTH CO.

17) Technical checking, negotiation and choosing of Ultrasonic testing machine for piping Co.

18) Technical checking, negotiation, choosing and suggestion of pressure testing machine for APM Co.

19) Repairing, operating and testing of 17 hydraulic unite for Neopan Co.

20) Checking of hydraulic system and offering method for optimization

21) Designing and supplying hydraulic plan and construction plan of full automatic digging for digging V water

aqueduct.

22) Technical checking and negotiation with N.I.D.C Co for checking some problems and optimization of COIL

TUBING machine that use in clearing petroleum hole.

23) Technical checking, designing and supplying plan of machine that collect effluent and oil exist in the water

for APM Co.

24) Technical checking and offering suggestion and supplying technical document for optimization and control

of cementing pipe for Ahwaz Farsite Co.

25) Supplying POWER TORQE for N.L.D.C

26) Supplying DISK BRAKE for N.I.D.O.C

27) Supplying pump truck for N.I.D.O.C