181 LAITON Female anchor with torque controlled expansion APPLICATION Suspended system Threaded studs Technical data Anchor size Anchor depth Min. base material thick. Drilling depth Drilling diameter Total anchor length Tighten torque Code (mm) (mm) (mm) (mm) (mm) (Nm) hef hmin hO dO L Tinst M4X15 15 50 22 5 15 4 052469 M6X20 20 60 30 8 20 9 062450 M8X30 30 70 35 10 30 20 062460 Recommended loads (N rec ) in kN TENSILE Anchor size Base material M4 M6 M8 hef 15 23 28 Concrete (C20/25 to C40/50) Nrec 0,05 0,40 0,60 Hollow clay bricks BP 400 Nrec 0,04 0,35 0,50 Concrete rendered (max 5 mm): recommended load reduced by 50% h 0 d 0 h min h ef L T inst Anchor size 6X70 Threaded part fuk (N/mm 2 ) Min. tensile strength 450 fyk (N/mm 2 ) Yield strength 400 TENSILE RM6 Female anchor with torque controlled expansion APPLICATION Suspended ceiling Lights Studs Technical data Anchor size Base material 6X70 hef 40 Concrete (C20/25 et C30/37) Nrec 0,8 NRu,m 4,0 Clay bricks BP 400 Nrec 0,8 NRu,m 4,0 Hollow clay bricks C 40 Nrec * 0,35 NRu,m * 2,0 Wood Nrec * 0,5 NRu,m * 2,0 * Using SPIT NYL 8 for RM6 in concrete and brick. Concrete rendered (max 5 mm): recommended load reduced by 50% Anchor size Anchor depth Min. base material thickness Drilling depth Drilling diameter Total anchor length Code (mm) (mm) (mm) (mm) (mm) hef hmin hO dO L 6X70 40 70 45 8 68 050059 Anchors mechanical properties Recommended loads (N rec ) and ultimate loads (N Ru,m ) in kN h 0 d 0 h ef L h min On concrete and masonry: drilling Ø8, put the NYL anchor in the hole, and install the RM6 anchor with the setting tool, On wood: screw it directly with the setting tool. INSTALLATION MAJ 09/18

Female anchor with torque controlled expansion...RM6 Female anchor with torque controlled expansion APPLICATION Suspended ceiling hLights Studs Technical data Anchor size Base material

Download PDF Report

Upload
others
View
10
Download
0

Embed Size (px)

Citation preview

Page 1: Female anchor with torque controlled expansion...RM6 Female anchor with torque controlled expansion APPLICATION Suspended ceiling hLights Studs Technical data Anchor size Base material

181

Ligh

t w

eigh

t an

chor

sLi

ght

wei

ght

anch

ors

Ligh

t w

eigh

t an

chor

LAITON

Female anchor with torque controlled expansion

APPLICATION

Suspended system Threaded studs

Technical data

Anchor size Anchor depth Min. base material thick.

Drilling depth Drilling diameter

Total anchor length

Tighten torque

Code

(mm) (mm) (mm) (mm) (mm) (Nm)hef hmin hO dO L Tinst

M4X15 15 50 22 5 15 4 052469M6X20 20 60 30 8 20 9 062450M8X30 30 70 35 10 30 20 062460

Recommended loads (Nrec) in kN

TENSILE

Anchor sizeBase material

M4 M6 M8hef 15 23 28

Concrete (C20/25 to C40/50)Nrec 0,05 0,40 0,60Hollow clay bricks BP 400Nrec 0,04 0,35 0,50Concrete rendered (max 5 mm): recommended load reduced by 50%

hmin

hef

Tinst

Anchor size 6X70Threaded part fuk (N/mm2) Min. tensile strength 450fyk (N/mm2) Yield strength 400

TENSILE

RM6

Female anchor with torque controlled expansion

APPLICATION Suspended ceiling Lights Studs

Technical data

Anchor sizeBase material

6X70hef 40

Concrete (C20/25 et C30/37)Nrec 0,8NRu,m 4,0Clay bricks BP 400Nrec 0,8NRu,m 4,0Hollow clay bricks C 40Nrec* 0,35NRu,m* 2,0WoodNrec* 0,5NRu,m* 2,0*Using SPIT NYL 8 for RM6 in concrete and brick. Concrete rendered (max 5 mm): recommended load reduced by 50%

Anchor size Anchor depth Min. base material thickness

Drilling depth Drilling diameter Total anchor length

Code

(mm) (mm) (mm) (mm) (mm)hef hmin hO dO L

6X70 40 70 45 8 68 050059

Anchors mechanical properties

Recommended loads (Nrec) and ultimate loads (NRu,m) in kN

hef

hmin

On concrete and masonry: drilling Ø8, put the NYL anchor in the hole, and install the RM6 anchor with the setting tool, On wood: screw it directly with the setting tool.

INSTALLATION

MAJ 09/18