181

Ligh

t w

eigh

t an

chor

sLi

ght

wei

ght

anch

ors

Ligh

t w

eigh

t an

chor

s

LAITON

Female anchor with torque controlled expansion

APPLICATION

Suspended system Threaded studs

Technical data

Anchor size Anchor depth Min. base material thick.

Drilling depth Drilling diameter

Total anchor length

Tighten torque

Code

(mm) (mm) (mm) (mm) (mm) (Nm)hef hmin hO dO L Tinst

M4X15 15 50 22 5 15 4 052469M6X20 20 60 30 8 20 9 062450M8X30 30 70 35 10 30 20 062460

Recommended loads (Nrec) in kN

TENSILE

Anchor sizeBase material

M4 M6 M8hef 15 23 28

Concrete (C20/25 to C40/50)Nrec 0,05 0,40 0,60Hollow clay bricks BP 400Nrec 0,04 0,35 0,50Concrete rendered (max 5 mm): recommended load reduced by 50%

h0

d0

hmin

hef

L

Tinst

Anchor size 6X70Threaded part fuk (N/mm2) Min. tensile strength 450fyk (N/mm2) Yield strength 400

TENSILE

RM6

Female anchor with torque controlled expansion

APPLICATION Suspended ceiling Lights Studs

Technical data

Anchor sizeBase material

6X70hef 40

Concrete (C20/25 et C30/37)Nrec 0,8NRu,m 4,0Clay bricks BP 400Nrec 0,8NRu,m 4,0Hollow clay bricks C 40Nrec* 0,35NRu,m* 2,0WoodNrec* 0,5NRu,m* 2,0*Using SPIT NYL 8 for RM6 in concrete and brick. Concrete rendered (max 5 mm): recommended load reduced by 50%

Anchor size Anchor depth Min. base material thickness

Drilling depth Drilling diameter Total anchor length

Code

(mm) (mm) (mm) (mm) (mm)hef hmin hO dO L

6X70 40 70 45 8 68 050059

Anchors mechanical properties

Recommended loads (Nrec) and ultimate loads (NRu,m) in kN

h0

d0

hef

L

hmin

On concrete and masonry: drilling Ø8, put the NYL anchor in the hole, and install the RM6 anchor with the setting tool, On wood: screw it directly with the setting tool.

INSTALLATION

MAJ 09/18