Hall’s Safety Equipment 139 Gasper Rd., P.O. Box 230 Grove City, PA 16127-0230

249

This rugged tool apron, with convenient tool holders, is an ideal aerialbucket accessory. It provides the aerial worker with a 4 pocket tool pouch,durable canvas nut and bolt bag, and loops to hold the lineman’s hammerand heavy wrench. This takes the load off the man, yet keeps all toolshandy. The lip of the apron is so formed that it will not disengage withoutdeliberate effort when used on conventional buckets.Size: 20" wide x 18" long.

FIBERGLASS TOOL APRON

CATALOG NO. 45004

CATALOG NO. 24-25

HIGH IMPACT PLASTIC TOOL BOARDS

This heavy duty tool board made from high impact ABS plastic comeswith leather attachments. The leather attachments include; a 3 pockettool pouch with snap, a single pocket tool pouch, loops to accommodatehammers and wrenches, and a large reinforced nut and bolt pouch. Thistool board will fit aerial buckets with lips up to 2-1/2” wide.Size: 18" wide x 22-1/2" long.

The Deluxe Fiberglass Tool Board will hold many tools without having tocarry them as well as keeping them organized. It has numerous pockets andpouches to hold all tools needed. Reinforced 4-ply neoprene nylon behindthe leather pouches for added strength. Auger bit holder. It comes with aremovable fluorescent light which is ideal to illuminate tools and bucket.Fluorescent light may be different then pictured and is made in China.Size: 20" wide x 18" long.

“TOP OF THE LINE”DELUXE FIBERGLASS TOOL BOARD

CAT. NO.45006 - Complete Tool Board With Fluorescent Light

400094 - Replacement Fluorescent Light Only

A heavy duty holder for all the wrenches, sockets, connectors, and othertools not usually carried on the tool belt or the tool apron. Included withthe box are two 3/4" diameter PVC hooks that lock on the bucket lip. Toolbox may be hung inside or outside the bucket.Size: 18" long x 9" wide x 11" deep.

FIBERGLASS AERIAL TOOL BOX

CATALOG NO. 4510

Phone: 800-227-4255 www.hallssafety.com Fax: 724-458-0592

CATALOG NO. 4512A small box made from fiberglass for connectors, nuts, bolts, and misc.items which are needed close at hand. Easy to use with a gloved hand.Ideal for trouble lantern. Built on hanger and fits up to a 3-3/4" bucket lip.Size: 11-1/2" long x 6" wide x 8" deep.

SMALL PARTS BOX

A heavy duty holder for all the wrenches, sockets, connectors, and othertools not usually carried on the tool belt or the tool apron. Reinforced liparound the tray edge. Integrated hanger fits bucket lips up to 2-5/8”. Builtin bumper keeps the tray level.Size: 19" long x 8-1/4" wide x 8" deep.

FIBERGLASS AERIAL TOOL TRAY

CATALOG NO. 4509

Jameson's heavy duty high impact ABS plastic bucket tool holders offer safe,convenient storage for bucket truck accessories. Water repellent and UVresistant, this tray is designed to withstand extreme weather conditions. Builton a bumper to keep the tray level. Six convenient removable dividers letyou choose the size and how many compartments your tool tray has.Size: 23" long x 14" wide x 8" deep.

HIGH IMPACT PLASTIC TOOL TRAYWITH INTERIOR DIVIDERS

CATALOG NO. 24-17

FIBERGLASS AERIAL TOOL TRAY

CATALOG NO. TT2This sturdy tray is molded from chopped fiberglass with a gel coat finish.For added flexibility, the extended lip hook design allows the tool traymounting on the inside or outside of the bucket. The backside has afiberglass leveling stand off to keep tray level.Size: 19" long x 8-3/4" wide x 16" deep.

250

This tool tray is deep enough to accommodate long handle cutters andreduces the chance for parts to bounce out when driving on rough roads.Heavy duty fiberglass construction. Reinforced lip around the tray edgefor added strength. Built on mount to attach easily to bucket. Built inbumper keeps the tray level.Size: 18-1/2 long x 6-1/2" wide x 19-1/4" deep.

CATALOG NO. 4511

DEEP FIBERGLASS AERIAL TOOL TRAY

Hall’s Safety Equipment 139 Gasper Rd., P.O. Box 230 Grove City, PA 16127-0230

251

IMPACT WRENCH HOLDERSWith or Without Scabbard

These impact wrench holders are made from high impact ABS plasticand are water repellent as well as UV resistant. Designed to withstandextreme weather conditions. Adjustable clamp bracket allows tool holderto fit any size bucket, with or without a liner, and mounts inside or outsidebucket. Velcro straps secure tool in holder when not in use. Accommo-dates most wrenches and drills.

Long holster offers complete protection for tool. Includes molded holderfor two spare drill bits.Size: 30" long x 11" wide x 9" deep.

Impact Wrench HolderCATALOG NO. 24-12A

Impact Wrench Holder With ScabbardCATALOG NO. 24-12AH

Size: 10" long x 10" wide x 7" deep.

Fiberglass construction with large form fitted pocket will accept mostimpact wrenches. Stiffener to maintain shape. Slot will allow storage withauger bit in wrench. Velcro strap holds impact secure during travel. Mountseasily to the inside or outside of bucket. Hanger will fit over a bucket lip ofup to 3-3/4" wide. Keeps tools and hoses out of the lineman’s way.Size: 9-1/2" wide x 13" long.

FIBERGLASS IMPACT WRENCH HOLDER

CATALOG NO. 4522M

HIGH IMPACT PLASTIC CHAINSAW HOLDER

CATALOG NO. 24-14AHigh impact ABS plastic chainsaw holder is water repellent as well as UVresistant and designed to withstand extreme weather conditions. Fitsmost standard and hydraulic pistol grip chainsaws. Special offset keepsmuffler away from scabbard. Adjustable clamp bracket allows tool holderto fit any size bucket, with or without a liner.Size: 7-1/2" wide x 35” long. Storage chamber opening: 5" x 1-1/4".

HIGH IMPACT PLASTIC CHAINSAW HOLDERWITH REMOVABLE LINER

CATALOG NO. 24-14LSimilar to the #24-14A but has a removable liner for extended life. Highimpact ABS plastic chainsaw holder is water repellent as well as UVresistant and designed to withstand extreme weather conditions. Fitsmost standard and hydraulic pistol grip chainsaws. Special offset keepsmuffler away from scabbard. Adjustable clamp bracket allows tool holderto fit any size bucket, with or without a liner.Size: 8" wide x 35” long. Storage chamber opening: 5" x 1-1/4".

#24-12A

#24-12AH

#24-14A

#24-14L

252

Phone: 800-227-4255 www.hallssafety.com Fax: 724-458-0592

Handling a chain saw aloft can be much easier when a secure storage devicesuch as this holder is used. It will mount on the inside or outside of bucket.Made of reinforced layers of woven fiberglass. Two sturdy springs keep theholder from falling off of the bucket, even when traveling on the road. Designedto hold most chainsaws.Size: 33” long x 8-1/2” wide. Storage chamber opening: 6" x 6-1/4".

FIBERGLASS CHAINSAW HOLDER

CATALOG NO. 4514

HIGH IMPACT PLASTICSINGLE POCKET TOOL HOLDER

CATALOG NO. 24-15Made from heavy duty high impact ABS plastic. Water repellent and UVresistant, this holder is designed to withstand extreme weather conditions.Conveniently holds bolt cutters, crimp tools, pruners, etc. safely and keepsthem off the bucket floor. Adjustable clamp bracket allows tool holder to fitany size bucket, with or without a liner, and mounts inside or outside bucket.Overall size: 22" long x 8-1/2" wide x 7” deep.Pocket size: 18-3/4” long x 6-3/4” wide x 3-1/4” deep.

HIGH IMPACT PLASTICDOUBLE POCKET TOOL HOLDER

Made from heavy duty high impact ABS plastic. Water repellent and UVresistant, this holder is designed to withstand extreme weather conditions.Conveniently holds bolt cutters, crimp tools, pruners, etc. safely and keepsthem off the bucket floor. Long back accommodates a large variety of tools.Drain hole in bottom allows moisture escape. Adjustable clamp bracket forsecure mounting to the inside or outside of bucket with or without a liner.Overall size: 32" long x 8-1/2" wide x 10” deep.Inner pocket size: 19” long x 6-1/2” wide x 2-1/2” deep.Outer pocket size: 15-1/2” long x 5-1/4” wide x 2-1/2” deep.

CATALOG NO. 24-15D

HURT MANBUCKET TRUCK RESCUE SYSTEM

When a person is hurt and wedged in the bottom of the basket, retrieval isdifficult. The #3813 bucket rescue is ideal to lift the hurt man easily and quickly.This rescue system, with the stainless steel block and tackle provides a liftingratio of 5 to 1 with 95’ of 11 mm double braid rope. Designed to mount high onthe boom to raise a person wearing a harness further up to ease the rescue.Mounts on boom with ratchet straps.

CATALOG NO. 3813

FIBERGLASS LITEBOX® HOLDER

CATALOG NO. 4503Fiberglass construction and equipped with Streamlight base. Mounts easily tothe inside or outside of bucket. Built in hanger will fit over a bucket lip of up to3-3/4" wide.Size: 4-1/2" wide x 10" long.

Hall’s Safety Equipment 139 Gasper Rd., P.O. Box 230 Grove City, PA 16127-0230

253

BOOM MOUNTED HYDRAULIC TOOL HOLDERS

Provides an out of the bucket storage location for standard hydraulic circular saws.Size: 12" long x 12" wide x 7” deep.

Circular Saw and Handle HolderCAT. NO.24-02 - Complete Unit24-02B - Replacement Saw Box and Lock/Strap Only

Take the tools out of the bucket and mount them on the boom for safe,convenient access. Made from high impact ABS plastic, these boommount tool holders can be strapped to round or square booms. Waterrepellent and UV resistant, they are designed to withstand extreme weatherconditions. Each boom mounted tool holder comes complete with the#24-04R handle unit.

Unique holder provides a safe, convenient, out of the bucket storagelocation for all long reach chain saws.Size: 32" long x 5" wide.

Long Reach Chainsaw and Handle HolderCAT. NO.24-03F - Complete Unit24-03B - Replacement Chainsaw Box and Lock/Strap Only

Provides a safe convenient storage location for your hydraulic pruners.Size: 12" long x 7-1/2" wide x 2-1/2 deep.

Hydraulic Pruner and Handle HolderCAT. NO.24-04 - Complete Unit24-04B - Replacement Hydraulic Pruner Box and Lock/Strap Only

#24-08R

Replacement handle unit for any of the above boom mounted hydraulictool holders.

Replacement Handle Unit for Boom MountedHydraulic Tool HoldersCAT. NO.24-04R - Complete Handle Unit, (Includes #24-08R, and #24-09R)24-08R - Handle Only24-09R - 5’ Nylon Strap with Ratchet Only #24-09R

#24-04B

#24-03B

#24-02

This versatile Hook Step offers you the flexibility of positioning the step onthe inside or outside of your bucket. Constructed of chopped fiberglasswith a smooth gel coat finish. The Hook Step also features a non-skidmaterial on the step section for added safety. Will fit over a bucket lip upto 3 inches wide.Size: 24” high x 7-1/4” wide. Weight: 7 lbs.

HOOK STEP

CATALOG NO. HS

Phone: 800-227-4255 www.hallssafety.com Fax: 724-458-0592

254

AERIAL BUCKET COVERS

These aerial bucket covers are made of 18 ounce orange vinyl coatednylon. The cover has a heavy sewn in bungee cord and snap which holdssnugly to standard buckets. The secure grommet hole may be used toinstall a tie line or for a hang up loop.#4545 One Man Cover fits up to 50" x 50" buckets.#4548 Two Man Cover fits up to 50" x 62" buckets.

CAT. NO.4545 - One Man Bucket Cover

4548 - Two Man Bucket Cover

Bucket cover has foam between two layers of heat sealed heavy weightvinyl. This creates a dome effect over the bucket to allow maximum waterrunoff. Elastic shock cord sewn into the hem. 4’ lanyard with swivel snapattached to further secure the cover. Heavy weight vinyl is waterproof, gas,oil, and tear resistant and designed to reduce wind whip. Can be reversedshould one side become damaged.Fits baskets: 24" x 24" to 24" x 30".

CATALOG NO. 4546

ONE MAN FOAM AERIAL BUCKET COVER

OUTRIGGER PADS

CAT. NO.PAD1515.75 - 15” x 15” x 3/4”

PAD18181 - 18” x 18” x 1”

PAD24241 - 24” x 24” x 1”Heavy duty single-ply construction outrigger pad.Features include, no warping, resistant to oilsand chemicals, no delamination, no splinters,and will recover back to original shape afterbending. These pads have a smooth non-slipsurface on both sides. Lifetime guarantee.

.ON.TAC THGIEWYTICAPACDAOL

LACITREV 54 o

57.5151DAP .SBL2/1-5 .SBL000,04 .SBL000,81

18181DAP .SBL11 .SBL000,55 .SBL000,03

14242DAP .SBL02 .SBL000,06 .SBL000,53

#4545

CAT. NO.AC5997 - 1 Man, (24” x 24” x 1/2”)AC5998 - 1-1/2 Man, (30” x 24” x 1/2”)AC5999 - 2 Man, (48” x 24” x 1/2”)Protect and extend the life of your bucket liner with one of theseflexible rubber mats. Durable enough to withstand everyday use.Non-slip to provide an extra level of footing security. Easy to trimfor an exact fit.

FLEXIBLE RUBBER MATSFOR BUCKET LINER PROTECTION

Hall’s Safety Equipment 139 Gasper Rd., P.O. Box 230 Grove City, PA 16127-0230

255

AlturnaMATS® GROUND PROTECTION MATS

The original ground protection mats featuring the diamond plate tread designis ideal for rugged applications where maximum traction is desired. Used in abroad variety of applications such as utilities, construction, tree care, golfcourses, etc...wherever saving the costs of ground restoration is a factor. Thesevirtually indestructible 1/2” thick polyethylene mats are used in a variety ofmarkets worldwide for applications as varied as the terrain and weather.With AlturnaMATS®, getting stuck is virtually eliminated, even in swampyenvironments. They have been field tested in record cold and intense heat.AlturnaMATS® will withstand vehicles up to 60 tons, bend but do not breakand have a limited lifetime warranty. Diamond plate tread on both sides.

CAT. NO.AM28 - 2’ x 8’, (43 lbs.)AM38 - 3’ x 8’, (64-1/2 lbs.)AM48 - 4’ x 8’, (86 lbs.)

AlturnaMATS® are alsoavailable in white (extra charge).

Please call us for a quote.

Turn-A-Links create an instant portable roadway or working platform for as longas you need it. They connect easily. Ideal when working in harsh sites or whenthe job requires several days to complete. Made of rugged 1/2” round hot rollsteel with a galvanized coating, making them easier to locate on a jobsite andprotects them from rusting.

Handi-Hooks make moving AlturnaMATS® easy. Even in wet areas this item willlift the mats. Made of steel rod and painted white. Length: 3’. Weight: 2-1/2 Lbs.

AlturnaMATS® ACCESSORIES

Turn-A-LinksCATALOG NO. RTL-SG

Handi-HooksCATALOG NO. AMHH

#RTL-SG

#AMHH

Electric, gas, and telephoneutilities save time and groundrestoration costs when digging updamaged lines. AlturnaMATS®are easy to use and “clean” towork on. Simply hose down andthey’re ready to use on the nextproject.

AlturnaMATS® are available in an economical package of 12 mats plus accessoriesand a convenient metal storage-skid rack. Just load the 12 mats onto your truckbed and you’re set for making a nearly 50 foot “roadway” to the job site.

Money saving Mat-Paks consist of:-12 AlturnaMATS® ground protection mats, either 4’ x 8’ or 3’ x 8’.-20 single Turn-A-Links.-2 Handi-Hooks.-2 Custom nylon straps.-1 metal storage and transportation rack with four way fork lift entry. *Storage rack capacity is: Forty-eight 3’ x 8’ AlturnaMATS®,

or Thirty-six 4’ x 8’ AlturnaMATS®.

CAT. NO.AMCP3 - 3’ x 8’ Mat Package, (Approx. Shipping Weight: 868 lbs.)AMCP4 - 4’ x 8’ Mat Package, (Approx. Shipping Weight: 1126 lbs.)

All Ground Protection Matsand Mat-Paks on this page

must be shipped by truck. Extrashipping fees will be charged.

AlturnaMATS® MAT-PAK