FINA Advertising Rules

FINA World Swimming Championships (25m) Hangzhou (CHN) 2018

These rules are based on the FINA Rules BL 7.1.4 (caps) of the FINA Handbook

(http://fina.org/content/fina-rules):

• One (1) manufacturer’s logo of a maximum size of 20cm2 (when the cap is not being worn) on the front.

• The FINA Partner logo from Yakult shall be printed on the right side of the cap.

• The FINA Partner logo from Yakult shall be of 20cm2 (H22.5mm x W90mm) in size (when is not being worn). Whenever the swimming cap is white, the Yakult logo should measure exceptionally H15mm x W90.5mm.

• The FINA Partner logo from Yakult shall be printed in red (Pantone:199C) on a white background (box)

• One (1) flag and country name (code) of the size of 32cm2 may be printed on the left side of the cap when worn.

• The athlete’s name of the size of 20cm2 may also be printed on the left side of the cap. Any athletes wishing to wear two caps, both caps must comply with the FINA Rules.

Deadline to submit the design template (swimwear, uniform and other equipment): 1 November 2018 Note: the final approval of all swim caps, swimsuits, goggles and pool deck equipment is always made at the Championships itself by the technical officials, in the call room prior to each competition swim Any questions? Please do not hesitate to address your queries directly to the FINA Marketing

Department, by sending your correspondence to Greta Avola (greta.avola@fina.org).