Fpdproductguide 2015 web

GUIDEproduct2015

KERCKHAERT | LIBERTY | RANGER | FOOTPRO™

FARRIERPRODUCTS™ | VECTOR | BELLOTA

BLOOM FORGE | GIBBINS | MERCURY

HOT IRON PRODUCTIONS | FDICK

NORDIC FORGE | KNIPEX | VETTEC | HAWTHORNE

KERCKHAERT RANGER SERIESRanger Lite ...................................... 1Ranger Lite Rim ................................ 1Ranger Plain .................................... 1Ranger Shoe Measurements .............. 2

KERCKHAERT AMERICAN SERIESSTEEL SHOESStandard .......................................... 3Standard Lite .................................... 3Standard Pony .................................. 3Standard Extra .................................. 3Standard Rim .................................... 4Standard Lite Rim ............................ 4Dura Plain ........................................ 4SX-7 Unclipped ................................ 5SX-7 Clipped .................................... 5SX-8 Unclipped ................................ 6SX-8 Clipped .................................... 6Steel Triumph Unclipped .................... 7Steel Triumph Clipped ........................ 7Steel Triumph Lite Unclipped .............. 8SX Roller Unclipped .......................... 8Pride Sliding Plates 1/4" x 1" ............ 9Pride Sliding Plates 1/4" x 1-1/4" ...... 9Pride Sliding Plates 1/4" x 7/8" .......... 9Pride Fine Sliding Plates 1/4" x 1" ...... 9Pride 1/4" x 3/4" .............................. 9Draft Series 28 x 10 Unclipped .......... 10Draft Series 28 x 10 Clipped .............. 10Draft Series 28 x 12 Clipped .............. 10Draft Series 32 x 12 Clipped .............. 10American Steel Shoe Measurements ........................ 11 - 12

KERCKHAERT EUROPEAN STEEL SHOESDF ................................................ 13DF Quarter Clipped .......................... 13DF Select ........................................ 13DF Grand Prix .................................. 14DF Quarter Motion .......................... 14Steel Comfort .................................. 14Classic Roller Clipped ...................... 15 Classic Fast Break (Roller) Unclipped 15 Concave Clipped .............................. 16 Century Big Foot ............................ 16 SSP Unclipped ................................ 17Meister Hufeisen ............................ 17 European Steel Shoe Measurements .............................. 18

KERCKHAERT STANDARDBREDSHOESOuter Rim Front .............................. 19Outer Rim Hind .............................. 19Full & Half Swedge Unclipped ............ 20Full & Half Swedge Hind Toe Clipped .. 209/16” & 5/8” Half Round Front .......... 21TDR (Half Round) Front ...................... 21TNC Flat .......................................... 21Standardbred Shoe Measurements .... 22

KERCKHAERT ALUMINUM RIDING SHOESAluminum Century Unclipped ............ 23Aluminum Century Degree Unclipped .. 23Aluminum Century Clipped ................ 23Aluminum Comfort .......................... 24Triumph Aluminum Unclipped .......... 24Triumph Aluminum Clipped .............. 24Triumph Aluminum Degree ................ 25Triumph Aluminum Eggbar ................ 25Aluminum Riding Shoe Measurements .............................. 25

KERCKHAERT RACING SHOESKings Plates - Flush Toe, XT, Low Toe and

Regular Toe .................................. 26Kings Degree Hind XT and

Regular Toe .................................. 27Kings Outer Rim XT .......................... 27Kings Extra Sound Clipped ................ 27Synergy XT .................................... 28Syntra Regular Toe .......................... 28Fast Break and Fast Break XT ............ 28Tradition - XT, Low Toe, Regular Toe

and Quarter Horse Toe .................. 29Tradition Regular Toe and XT Clipped 30Legendary XT .................................. 30Steel Training ................................ 30Blue Bond ...................................... 31Smart Bond .................................... 31No Vibe .......................................... 31Racing Shoe Measurements ............ 32Toe Grab Measurements .................. 32

FARRIERPRODUCTS™ BAR SHOESSX-7 and SX-8 Egg Bar, Heart Bar

and Straight Bar ............................ 33Steel Triumph Egg Bar ...................... 33Standard Egg Bar ............................ 34DF Egg Bar .................................... 34Half Round Egg Bar ........................ 34Classic Roller Egg Bar ...................... 34SSP Egg Bar .................................... 34

HORSESHOE NAILSLiberty Horseshoe Nails .................... 35Vector Horseshoe Nails .................... 36Vector V-Trak .................................. 36

RASPS AND FILESBellota Top Sharp, Classic

and Razor Rasps ............................ 37Bellota Raptor Rasp, Mini Rasp

and Files ...................................... 38Bellota Tools .................................. 39Mercury Hoof Rasps ........................ 39

TOOLS, HOOF CARE ANDEDUCATIONAL PRODUCTSFootPro™ Tools ............................ 40-41FootPro™, farrierproducts™

and Gibbins Aprons.................. 42 - 43farrierproducts™ Tools ................ 44 - 45FDick Hammers.................................. 45Bloom Forge, fp™, FDick, Victorinox and Frost Hoof Knives .............. 46 - 47

Miscellaneous Tools .................. 48 - 49Grinders and Abrasives .............. 50 - 51Traction Products ............................ 52Bloom Forge Tools .................... 53 - 54Nordic Forge Tools .......................... 55Hoof Care Products .......................... 56Books ............................................ 57Hot Iron Productions Videos ............ 58Hoof Pads ................................ 59 - 60FPD Field Guide .............................. 60

TABLE OF CONTENTS

1

RANGER SERIESKERCKHAERT HORSESHOES

The Ranger Lite by Kerckhaerthas been designed for everydayuse in both work and pleasure. Itis easily shaped, hot or cold, andhas a generic shape for front orhind. With a higher grade of steelfor better wear and v-crease forbetter fit, this shoe provides theperfect solution for farriers whowant the best results at the bestprice.

Punched for City or Slim.

Ranger Lite

One Shape - Unclipped - 000, 00, 0, 1, 2, 3

NEW!

The Ranger Lite Rim is anexcellent shoe for activities thatrequire more traction than a flatshoe. A very popular style forrodeo event horses and generaltrail use. With a higher grade ofsteel for better wear and v-creasefor better fit, this shoe providesthe perfect solution for farrierswho want the best results at thebest price. This shoe features sole relief.


Ranger Lite Rim

One Shape - Unclipped - 000, 00, 0, 1, 2, 3

COMINGIN

2015!

The Ranger Plain is a versatileshoe with extra thickness toprovide additional wear,especially in rugged terrain. Witha higher grade of steel for betterwear and v-crease for better fit,this shoe provides the perfectsolution for farriers who want thebest results at the best price.


Ranger Plain

One Shape - Unclipped - 00, 0, 1, 2, 3

NEW!

2

RANGER SERIESKERCKHAERT HORSESHOES

Width Length FIAInches Inches Inches

RANGER LITE, LITE RIM AND PLAIN000 4-1/4 4-1/2 11-3/400 4-1/2 4-3/4 12-3/80 4-3/4 5 13-1/81 5 5-5/16 13-7/82 5-5/16 5-5/8 14-3/43 5-3/4 6 15-11/16

Horseshoe LineHorseshoe Line

� Made in Holland for the North American market

� Easily shaped, hot or cold

� Punched for City or Slim nails

� High quality steelfor better wear

� V-crease� Generic shape

for front or hind� Best price

Wears Longer and Plays Harder than all the rest

t

The Standard Pony shoes have a very niceshape for ponies and even fit some miniatures.Shoes are symmetrical.

Punched for 3-1/2 Race, 4-1/2 Race or 4-1/2 Slim.

Standard Pony

A wide-web pattern designed to giveprotection and support - especially inrough terrain. Features include bevelon ground side, sole relief and slighttapering of heels. V-crease allows forbetter nail fit. Shoes are symmetrical.

Punched for 5 City or 5 Slim.

Standard Extra

One Shape - Unclipped - 8x0, 6x0, 4x0 (all 16x6)


3

AMERICAN SERIES » STEELKERCKHAERT HORSESHOES

Quality in a one shape pattern(no front or hind). The placementof the nails in a V-shaped creaseallows you to nail withconfidence, knowing the integrityof the hoof will not becompromised. Fuller toe, insidebevel, sole relief and slight taperto heel area. The pricing of theStandard is very competitive, the quality is unsurpassed. Shoesare symmetrical.


Standard

One Shape - Unclipped - 00 (18x8), 0 (19x8), 1 (19x8), 2 (20x8), 3 (20x8)

Same quality as the well-known Standard Series shoe, theStandard Lite is a lighter version with 18x7 steel size.This shoe has the same features as the Standard: one shapepattern and V-shaped crease. Fuller toe, inside bevel and slighttaper to heel area. This is an attractive, economical series forhorses that require a lighter shoe. Shoes are symmetrical.

Punched for 4-1/2 Regular, 5 Race, 5 City or 5 Slim, dependingon size.

Standard Lite

One Shape - Unclipped - 000, 00, 0, 1 (all 18x7)

The Standard Rim is a one-shapepattern (no front or hind). Thisshoe is versatile and easilyshaped to fit front or hind,without the pointed toe shape ofother brands that makes itdifficult to fit. The bevels on theinside and outside offer goodbreakover, as well as excellentgrip in arena surfaces, trails andcross-country terrain. The full crease from heel to heel offersmaximum traction. V-Crease ensures better nail fit. Shoes aresymmetrical.

Punched for 5 City, 5 Race or 5 Slim.

Standard Rim

A one shape pattern with the same weight as the popular SX-7series, this is an ideal shoe for the Quarter Horse invarious disciplines, including roping, barrels and other timedevents. The shoes are easily fit to front or hind andthe punching helps maintain the integrity of the hoof. V-Creaseensures better nail fit. Fuller toe, inside bevel, and slight taper toheel area. Shoes are symmetrical.

Punched for 4-1/2 Regular, 5 Race, 5 City or 5 Slim, dependingon size.

AMERICAN SERIES » STEEL

4

KERCKHAERT HORSESHOES

One Shape - Unclipped - 000, 00, 0, 1 (all 18x7)

One Shape - Unclipped - 0, 1, 2

Standard Lite Rim

This 3/8" thick generic shapeshoe uses a high grade steel andgood carbon content forextended wear. The Dura Plainmeets the needs of horsesworking in rough and abrasiveterrains. The shoe is available ina symmetrical shape with nofront and hind.

Punched for city and slim blade nails.

Dura Plain

One Shape - Unclipped - 00, 0, 1, 2 & 3

(Fro

nt)

(Hin

d)

5


The first Kerckhaert shoe designed specifically for the NorthAmerican market. These light, strong shoes are among the mostpopular in the line. Used for a wide variety of disciplines, these1/4" shoes allow good nailing and fit without adding excessweight. Shoes are symmetrical. Sole relief on fronts.

Punched for 4-1/2 Regular, 5 Race or 5 Slim, depending on size.

SX-7 Unclipped

The best light, clipped shoe on the market. The front pattern isquarter clipped and the hinds come with side clips. Because lightshoes are often the most difficult to clip, you’ll find these are anexcellent option. Strong clips on well made shoes with sole relief.Toe area is slightly wider to provide strength and wear. Shoes aresymmetrical.

Punched for 4-1/2 Regular, 5 Race or 5 Slim, depending on size.

SX-7 Clipped

Front – Unclipped – 4x0, 000, 00, 0, 1, 2 (all 18x7)

Hind – Unclipped - 4x0, 000, 00, 0, 1, 2 (all 18x7)

Front - Quarter Clipped - 000, 00, 0 and 1 (all 18x7), 2 (19x7)

Hind - Side Clipped - 000, 00, 0 and 1 (all 18x7), 2 (19x7)

6


Efficiency is the name of the game. These shoes have a strong clipfrom top to bottom; quarter clip fronts, side clips behind. Becausethe clip is not drawn from the web of the shoe, the integrity of thenail holes and shoe strength is protected. Toe area is slightly widerto provide strength and wear. Front shoes have sole relief. Shoesare symmetrical.

Punched for 5 City, 5 Slim or 5 Combo.

SX-8 Clipped

Front - Quarter Clipped - 00 (19x8), 0 (19x8), 1 (20x8), 2 (21x8), 3 (22x8), 4 (22x8)

Hind - Side Clipped - 00 (19x8), 0 (19x8), 1 (20x8), 2 (21x8), 3 (22x8), 4 (22x8)

Demand for shoes punched for City head nails brought forth the SXSeries. The SX-8 is a 5/16" thick shoe with graduated widths.These shoes are used for trail, jumping, dressage and ranch work.Shoes are symmetrical. Sole relief on fronts.


SX-8 Unclipped

Front - Unclipped - 00 (19x8), 0 (19x8), 1(20x8), 2 (20x8), 3 (22x8)

Hind - Unclipped - 00 (19x8), 0 (19x8), 1(20x8), 2 (20x8), 3 (22x8)

(Fro

nt)

(Hin

d)

7


The Triumph steel series is considered the premier shoe for avariety of disciplines, including event horses, cross-country andvarious rodeo applications. Kerckhaert has added additionalthickness in sizes 0 - 3. Excellent front and hind shape andsteeper bevel in toe provides good breakover and less chance ofslipping. Sole relief and good heel support Shoes aresymmetrical.


Steel Triumph Unclipped

The clipped version of Kerckhaert's popular Steel Triumph offers allof the great features you’ve come to love about the Steel Triumph- and the clips provide additional security and less stress on thenails. Quarter clipped fronts; side clipped hinds. Kerckhaert hasadded additional thickness in sizes 0 - 3. This change isespecially beneficial if you use clipped shoes on event horseswith larger feet. Shoes are symmetrical.


Steel Triumph Clipped

Front - Unclipped - 00, 0, 1, 2, 3

Hind - Unclipped - 00, 0, 1, 2

Front - Quarter Clipped - 00, 0, 1, 2, 3

Hind - Side Clipped - 00, 0, 1, 2, 3

8


This series is designed specifically for the Quarter Horse and otherbreeds that don’t require heavy steel for good performance. Thefront shape is slightly narrower than the regular Triumph series andmakes fitting of the shoe much easier. With the lighter section ofsteel, this series has quickly become a favorite of performancehorses in the ring and out. Boxed heels and sole relief. Shoes aresymmetrical.

Punched for 4-1/2 Regular, 5 Race, 5 City or 5 Slim, depending onsize.

Steel Triumph Lite Unclipped

Front - Unclipped - 000, 00, 0, 1

Hind - Unclipped - 000, 00, 0, 1

With features similar to the Classic Roller, this shoe is an excellentchoice for horses needing additional ease of breakover, whether formovement in performance, or simply more comfort because ofinjuries or chronic ailments. While this half round style boastsmore ground surface than a true half round, it allows the ease ofbreakover half round shoes are noted for. The crease gives tractionwhile not taking away from the rollover effect of the shoe.


SX Roller Unclipped


9


The Pride Fine series of sliding plates offers achoice for the farrier that prefers a finerpunching pattern. The series is available in a1/4" x 1" stock size, with a very slight taper inthe heel area. The nail pattern works best for ashoe fit that is very close to a perimeter fit,where the shoe is not set forward.

Pride Fine Sliding Plates 1/4" x 1"

This is the most popular style in the line. Goodall-around performance choice. This style ismade with higher carbon steel for better wearand has a slight taper to 7/8" in the heelarea. 6 nail hole pattern on all sizes.

1/4" x 1"

1/4" x 1-1/4"A slightly wider version of the Pride SlidingPlates. Also tapered to 7/8".

Hind - 11, 11.5, 12, 13

Hind - 10, 11, 12

Versatility in a one shape pattern (no front orhind) best describes this flat shoe fromKerckhaert. Ideal for use with young ropinghorses and training for sliding horses. Alsouseful for other disciplines where a light, plainstamped shoe is required. No crease.

Pride 1/4" x 3/4"

One Shape - 00, 0, 1, 2

1/4" x 7/8"Excellent option for reining and roping horses, especially younger horses. High quality steel provides durabilityand strength.

Hind - 10, 11, 12

Hind - 11, 12, 13

Kerckhaert has introduced a new level of quality to the reining androping horse market with the Pride series of sliding plates. There isan excellent heel finish on all models. All Pride Series shoes arepunched precisely for 4-1/2 Race, 4-1/2 Race XS, 4-1/2 Slim or 5Special and require little filing to reduce the head of the nail. AllPride Series shoes are symmetrical.

Pride Sliding Plates

10


These smaller draft shoes are oftenused on Haflingers, carriage horses andeven Friesians in North America. This isa strong shoe that gives good wear.1/2" x 1-1/8".

Punched for E-8, E-9 or E-10,depending on size.

Front and Hind - Toe Clipped - 3, 4

Draft Series 28x12 Clipped

Front and Hind - Unclipped - 5, 6, 7, 8

Responding to the North Americanmarket’s demand for lighter shoeswithout clips, Kerckhaert produced theunclipped 3/8" x 1-1/8" series. Theshapes correspond to the natural shapeof the draft horse. Shoes aresymmetrical.

Punched for 7 or 8 Regular head.

Draft Series 28x10 Unclipped

Front and Hind - Toe Clipped - 5, 6, 7, 8

It’s a tradition to toe clip front andhind shoes for the workhorse toprevent the shoes from being drivenback during work in the fields or onthe streets. Kerckhaert provides astrong clip to make sure the job isdone well. 3/8" x 1-1/8". Shoes aresymmetrical.

Punched for 7 or 8 Regular head.

Draft Series 28x10 Clipped

Draft Series 32x12 ClippedThe most demanding of environmentswon’t overwork these shoes. Anytimethe work your horses are asked to doinvolves rough terrain, this is yourmost likely choice. Logging, packing,or whatever you are doing, theseshoes have the strength to hold upand protect the hoof. 1/2" x 1-1/4"

Punched for E-8, E-9 or E-10, depending on size.

Front and Hind - Toe Clipped - 5, 6, 7, 8

11



STANDARD8x0 3-1/2 3-1/2 9-1/26x0 3-3/4 3-7/8 10-1/44x0 4-1/8 4-1/8 11000 4-3/8 4-1/2 11-7/800 4-5/8 4-3/4 12-1/20 4-7/8 5 13-1/41 5 5-1/8 13-5/82 5-1/4 5-3/8 14-3/83 5-1/2 5-3/4 15-1/4

SX-7, SX-8 & SX ROLLERFront4x0 4-3/8 4-3/8 11-3/4000 4-5/8 4-1/2 12-1/400 4-7/8 4-3/4 12-7/80 5 5-1/8 13-1/21 5-1/4 5-1/4 14-1/82 5-1/2 5-3/8 14-5/83 6 5-7/8 15-7/84 6-1/8 6-1/8 16-5/8Hind4x0 4-1/4 4-3/8 11-3/4000 4-3/8 4-1/2 1200 4-5/8 4-3/4 12-1/20 4-7/8 5 13-1/81 5 5-1/8 13-3/42 5-1/4 5-3/8 14-3/83 5-5/8 5-3/4 15-3/84 6 6-1/8 16-1/4

SLIDING PLATES10 3-7/8 4-3/4 1211 4-1/8 5-1/4 1312 4-1/4 5-3/4 14-1/413 4-3/4 6-1/4 15

12



DRAFTFront3 6-1/8 5-7/8 16-1/44 6-3/8 6-1/4 175 6-7/8 6-5/8 18-1/26 7-1/8 7-1/8 19-1/87 7-1/2 7-3/8 208 7-7/8 7-5/8 21Hind3 5-7/8 5-7/8 15-1/24 6-1/8 6-1/4 16-1/25 6-5/8 6-1/2 17-7/86 7 7 18-3/47 7-1/4 7-3/8 19-5/88 7-1/2 7-5/8 20-1/2

STEEL TRIUMPH AND TRIUMPH LITEFront000 4-5/8 4-5/8 12-1/200 4-7/8 4-7/8 130 5 5 13-3/41 5-1/4 5-1/4 14-1/22 5-1/2 5-5/8 153 5-3/4 5-3/4 15-3/4Hind000 4-3/8 4-1/2 1200 4-5/8 4-3/4 12-5/80 4-7/8 5 13-1/41 5-1/8 5-1/4 14-3/82 5-3/8 5-1/2 14-7/83 5-5/8 5-3/4 15-1/2

FIANUMBERMEASUREMENTHEEL TO HEEL

< Width >

< Le

ngth

>

13

EUROPEAN SERIES » STEELKERCKHAERT HORSESHOES

Specifically designed for the hunter jumpermarket where additional support is required.Heels are elongated and tapered. Widestpart of shoe is moved forward, allowing an“extended" heel fit.

Punched for E-head.

The DF series of shoes is a Europeanline of shoes. This line has becomevery popular in recent years. Madefor the discerning farrier who requiresfinesse and attention to detail in hiswork. The DF line offers the broadestselection in features such as frontsand hinds, left and right footpatterns, different web sizes, clip positioning and nail hole sizingaccording to the size of the shoe.

Punched for E-head.

DF

8 mm - Front Toe Clipped - 5x0 (20x8), 4x0 (20x8), 000 (20x8), 00 (20x8), 0 (20x8 & 22x8), 1(20x8, 22x8), 2 (22x8 & 25x8), 3 (22x8 & 25x8), 4 (25x8)8 mm - Hind Side Clipped - 4x0 (20x8), 000 (20x8), 00 (20x8), 0 (20x8 & 22x8), 1 (20x8, 22x8 & 25x8), 2 (22x8 & 25x8), 3 (22x8 & 25x8), 4 (25x8), 5 (25x8)10 mm - Front Toe Clipped - 1 (22x10), 2 (22x10), 3 (22x10 & 25x10), 4 (22x10 & 25x10), 5 (25x10)

10 mm - Hind Side Clipped - 0 (20x10), 1 (22x10), 2 (22x10), 3 (22x10 & 25x10), 4 (22x10 & 25x10), 5 (25x10)

The front shape DF shoes with quarterclips are the fastest growing style in the Aclass Jumper circuit. The variety of steelsizes, combined with the excellent clipstyle and punching, has helped leadKerckhaert to the top in this segment ofthe market. Available in 8 mm and 10 mmthickness. Shoes are symmetrical.

Punched for E-head.

DF Quarter Clipped

8 mm - Front Quarter Clipped - 00 (19x8), 0 (20x8), 1 (22x8), 2 (22x8), 3 (24x8), 4 (25x8), 5 (25x8)

10 mm - Front Quarter Clipped - 1 (22x10), 2 (22x10), 3 (22x10), 4 (22x10 & 25x10), 5 (25x10), 6 (25x10)

DF Select

8 mm - Hind Side Clipped - 0 & 1 (20x8), 2, 3 (22x8)

10 mm – Hind Side Clipped – 1 (21x10), 2, 3, 4 (25x10), 5 (25x10)

14


The Steel Comfort meets thedemands of farriers looking for ahigh quality shoe that aids inbreakover. Key design featuresinclude rolled toe and branches,better breakover that improvescoordination of movement andoptimized balance with lesspressure on the tendons. Built-insole relief.

Punched for Liberty E-4 Slim and 5 Combo.

Steel Comfort

Front - Side Clipped - 00, 0, 1, 2, 3, 4

This is a special hind shoe with awider outside branch to giveadditional support in the heel area.Especially designed for the hunterjumper market.

Punched for E-head.

DF Grand Prix

8 mm - Hind Side Clipped - 0 (20x8), 1 (22x8), 2 (22x8), 3(24x8), 4 (25x8)

The DF Quarter Motion isdesigned with a beveled toe onthe ground surface which allowsthe hoof and limb to breakoverwith less stress and strain. Thebevel continues around thebranches of the shoes, a featurethat allows for more comfortablelateral movement as well. Thegreat Kerckhaert shape means theshoes are easy to fit and thequarter clips allow the shoe to be positioned to maximizeperformance. The shoes also have built-in sole relief. Shoes aresymmetrical.

Punched for E-head nails. Front only.

DF Quarter Motion

Front - 0, 1, 2 (22x8), 3 (24x8), 4 (25x8)

15


This half round style actually boasts more ground surface than atrue half round but you get the full benefit of ease of break-overthat half round shoes are noted for. The full shape of the frontpattern allows for easy fitting. The width of the sections gives agreat base of support. Available in quarter clipped or toe clippedfront, side clipped hind. Classic Roller Fronts are symmetrical.

Punched for E-head.

Classic Roller Clipped

Many horses in the market have strong walls and don’t require theuse of clips. The unclipped Classic Fast Break complements theclipped series with the same great breakover features. The wideroverall shape of this shoe is an excellent choice for horses thatneed additional ease of breakover for either movement inperformance or simply for more comfort because of injuries orchronic ailments.

Punched for E-head.

Classic Fast Break (Roller) Unclipped

Front - Quarter Clipped - 00 (20x8), 0 (20x8), 1 (22x8), 2 (22x8), 3 (22x8 & 24x8), 4 (24x8)

Front - Toe Clipped - 1 (22x8), 2 (22x8), 3 (24x8)

Hind - Side Clipped - 0, 1, 2 (all 22x8), 3 (24x8)

Front - Unclipped - 0 (22x8), 1 (22x8), 2 (24x8)

16


Kerckhaert offers an excellent selection of concave shoes; theirshapes and punching result in a premium product. The Concaveseries also boasts the innovative radius clips found on many of theother Kerckhaert series. Quarter and toe clipped fronts and sideclipped hinds.

Punched for E-head.

Concave Clipped

Front Quarter Clipped – 0 (20x10), 1 (20x10 & 22x10), 2 (22x10),3 (22x10)

Front Toe Clipped - 00 (20x10), 0 (20x10), 1 (20x10 & 22x10), 2 (22x10), 3 (22x10), 4 (23x11)

Hind Side Clipped - 00 (20x10), 0 (20x10), 1 (20x10 & 22x10), 2 (22x10), 3 (22x10), 4 (23x11)

Kerckhaert has addressed the problem many farriers run into with thewarm blood influence in the market. Sizes 6 & 7 fill a much neededgap in shoe size selection in the market. Creased through the toe,with an inner bevel and solid heels, this shoe series provides anexcellent choice for larger riding or carriage horses. Century BigFoot Fronts are symmetrical.

Punched for E-head.

11 mm - Front Toe Clipped - 4, 5 (all 25x11)

11 mm - Hind Side Clipped - 4, 5 (all 25x11)

12 mm - Front Toe Clipped - 6, 7 (all 28x12)

12 mm - Hind Side Clipped - 6, 7 (all 28x12)

Century Big Foot

17


The original unclipped style, most popular on the hunter jumper circuit.A broad choice of steel sizes, made in front and hind patterns - left andright, makes this an extremely versatile series.

Punched for E-head.

SSP Unclipped

8 mm - Front Unclipped - 4x0 (18x8), 000 (18x8), 00 (19x8), 0 (20x8), 1(20x8 & 22x8), 2 (22x8), 3 (22x8)

8 mm - Hind Unclipped - 4x0 (18x8), 000 (18x8), 00 (19x8), 0 (19x8& 20x8), 1 (20x8 & 22x8), 2 (20x8 & 22x8), 3 (22x8)

10 mm - Front Unclipped - 1, 2, 3, 4, 5 (all 22x10)

10 mm - Hind Unclipped - 1, 2, 3, 4, 5 (all 22x10)

The Meister is wider at the toe andin the heel area where the footneeds the most support, thebranches are narrower so that theyare more easily modified. TheKerckhaert Meister is a seriesdesigned and made for the Germanmarket; therefore, the sizing is different. Thenumber on the Meister shoe is two sizes largerthan normal Kerckhaert sizing for riding shoes. Inaddition, the mark on the Meister shoe is a "D" instead of the "K" youfind on the regular Kerckhaert shoe. Meister Fronts are symmetrical.

Punched for E-head.

Meister Hufeisen

8 mm - Front Quarter Clipped - 0 (19x8), 1 (19x8), 2 (20x8), 3 (21x8), 4 (21x8), 5 (22x8), 6 (22x8), 7 (22x8)

8 mm - Front Toe Clipped - 3 (21x8), 4 (21x8), 5 (22x8), 6 (22x8)

8 mm - Hind Side Clipped - 0 (19x8), 1 (19x8), 2 (20x8), 3 (21x8), 4 (21x8), 5 (22x8), 6 (22x8), 7 (22x8)

10 mm - Front Quarter Clipped - 3 (21x10), 4 (21x10), 5 (22x10), 6 (22x10)

10 mm - Hind Side Clipped - 3 (21x10), 4 (21x10), 5 (22x10), 6 (22x10), 7 (22x10)

Meister Sizing » 0 1 2 3 4 5 6 7

Kerckhaert Sizing » 000 00 0 1 2 3 4 5

18



EUROPEANFront5x0 4-1/4 4-1/8 11-3/84x0 4-3/8 4-3/8 11-3/4000 4-5/8 4-1/2 12-3/800 5 4-3/4 130 5-1/4 5 13-5/81 5-3/8 5-1/4 14-1/42 5-5/8 5-1/2 15-1/43 6 6 16-1/44 6-1/4 6-1/4 16-7/85 6-5/8 6-3/8 17-3/46 7-1/8 7 18-1/47 7-3/8 7-1/4 20Hind5x0 4-1/8 4-1/8 11-1/44x0 4-1/4 4-3/8 11-1/2000 4-1/2 4-1/2 11-7/800 4-3/4 4-3/4 12-1/20 5 5 13-1/41 5-1/8 5-1/4 13-3/42 5-1/2 5-1/2 14-3/43 5-3/4 5-7/8 15-1/24 6-1/8 6-1/4 16-1/45 6-3/8 6-1/2 17-1/46 6-7/8 7 18-3/47 7-1/8 7-3/8 19-1/2

0 1/16 1/8 3/16 1/4 5/16 3/8 7/16 1/2 9/16 5/8 11/16 3/4 13/16 7/8 15/16 1

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25

INCHES TO MILLIMETER COMPARISON CHARTScale 3 times actual size

Inch

Millimeter

19

STANDARDBREDKERCKHAERT HORSESHOES

We refer to this shape as the Standardbred because of its narrower,longer shape that is very typical of the Standardbred front foot.This aluminum shoe is proving to be a tough, good wearing shoefor the Standardbred surfaces, but can also be used successfullywith Thoroughbreds. The punching is also slightly deeper to helpget good nailing. Available unclipped or toe clipped with a 2 mmtoe grab. Shoes are symmetrical.

Punched for 4-1/2 Race or 4-1/2 Slim.

Outer Rim Front

While Kerckhaert’s Outer Rim Hind is an ideal shape forStandardbreds, this aluminum shoe can also be used successfullyon Thoroughbreds. It has a strong toe clip, unique surface finishwith sole relief and a 2 mm toe grab. Shoes are symmetrical.

Punched for 4-1/2 Race or 4-1/2 Slim.

Outer Rim Hind

Unclipped - 4, 5, 6, 7, 8, 9

Toe Clipped - 4, 5, 6, 7, 8, 9, 10

Toe Clipped - 4, 5, 6, 7, 8

20


The clipped version of the Kerckhaert Full and Half Swedge offeradditional security for the shoeing cycle. The strong toe clip ofthese shoes will help avoid the problems of shoes sliding backwhile in performance or in the stall. The support in the heel area,with a slightly wider lateral heel will increase the chances ofkeeping your horses sound. Excellent shape minimizes time spenton fitting shoes.

Punched for 4-1/2 Race, 4-1/2 Slim or 5 Race.

Full & Half Swedge Hind Toe Clipped

Full Swedge Hind Toe Clipped - 1, 1.5, 2, 2.5, 3, 3.5, 4

Half Swedge Hind Toe Clipped - 1.5, 2, 2.5, 3, 3.5, 4

For years the market had no choice in the Standardbred shoemarket. The introduction of the Kerckhaert Swedges, made with atough, durable steel is a dream come true for many. The shapes ofthe shoes are a significant improvement and the carefulconsideration seen in the nail placement and support in the heelsare noticeable features.


Full & Half Swedge Unclipped

Front - Full Swedge - 1, 1.5, 2, 2.5, 3, 3.5, 4, 6

Hind - Half Swedge - 1, 1.5, 2, 2.5, 3, 3.5, 4

21


The Kerckhaert TNC series hasbeen used for many years inthe trotting market inEurope. Made with a verytough material, this flat shoehas creases that are easily fitand used for the typicalStandardbred race horse. Thisseries helps with the challenge of gaiting the young horse, as wellas fitting the needs of aged horses.

TNC Flat

Hind (14x5) - Unclipped - 000, 00, 0, 1, 2

Hind (16x6) - Unclipped - 1, 2

Front (18x6) - Unclipped - 1, 2

The TDR is creased, giving goodtraction as well as the breakoverit's famous for. There are threechoices of stock size - 1/2", 5/8"& 3/4".

TDR (Half Round)Front

1/2" (14x6) - Unclipped - 00, 0, 1, 2

5/8" (16x8) - Unclipped - 000, 00, 0, 1, 2

3/4" (18x9) - Unclipped - 00, 0, 1, 2

The Standardbred market has longrelied on the half round style totrain and race. The Kerckhaertdesign gives better heel supportand a much more realistic nailpattern to help with theperformance of the horse. The shape of the shoes minimizes theamount of work needed to get a good fit. A high quality steelprovides excellent wear and support for the foot. Shoes aresymmetrical.


9/16" & 5/8" HalfRound Front

9/16" Unclipped - 1.5, 2, 2,5, 3, 3.5, 4

5/8" Unclipped - 2, 3, 4

22


FULL & HALF SWEDGE1 4 4-1/2 11-7/81.5 4-1/4 4-3/4 12-1/22 4-3/8 5 132.5 4-5/8 5-1/8 13-1/23 4-7/8 5-3/8 14-1/83.5 5 5-1/2 14-5/84 5-1/8 5-3/4 156 5-1/4 6-3/4 17-3/8

9/16" & 5/8" HALF ROUND1.5 4-3/8 4-3/4 12-5/82 4-1/2 5 13-1/82.5 4-5/8 5-1/4 13-3/43 4-7/8 5-1/2 14-1/83.5 5 5-5/8 14-5/84 5-1/8 5-7/8 15


OUTER RIM

Front4 4-1/2 4-1/2 12-1/25 4-3/4 4-3/4 12-3/46 5 5 13-3/87 5-1/8 5-1/8 13-7/88 5-1/4 5-3/8 14-1/29 5-1/2 5-7/8 15-1/210 5-9/16 6-3/16 16Hind4 4-1/4 4-1/4 11-7/85 4-1/2 4-1/2 12-1/26 4-7/8 5-1/8 13-1/27 5 5-1/2 14-3/88 5-1/4 5-3/4 15-1/8

23

ALUMINUM » RIDINGKERCKHAERT HORSESHOES

The Aluminum CenturyUnclipped series providesfarriers who prefer theKerckhaert TriumphAluminum an option forsmaller feet. This shoe isa good fit for feet that require a narrower shape, with less width inthe toe. Shoes are symmetrical.

Punched for 4-1/2 Regular, 5 Race or 5 Slim.

The Century Support frontpattern is a moretraditional round shape.Thicker than Triumph foradditional strength andwithout the broad toe.The shoes have a slightlyfiner punch. Designedwith support in the toe and heel area similar to the Meister steelshoes. Available in front and hind patterns. Quarter clipped front,side clipped hind. Shoes are symmetrical.


AluminumCenturyUnclipped

Front - Unclipped - 000, 00, 0, 1, 2




Kerckhaert has produced theAluminum Century Degree tocomplement the AluminumCentury Unclipped shoe. Farrierswill find a wedge platform onthis shoe, with many of thefeatures of the unclipped series.Shoes are symmetrical.


Aluminum CenturyDegree Unclipped

AluminumCentury Clipped

SoleRelief

SoleRelief

SoleRelief

AluminumComfort

24


The Triumph Clippedshoes have all the samefeatures as theunclipped version, whileoffering the strength ofquarter clips. Shoes aresymmetrical.


The Triumph is a drop forgedaluminum shoe that has anoptimum front shape. Theseshoes are commonly used bythe Western Pleasure market aswell as the Hunter andThoroughbred shoer. Well-placed nail holes allow for goodnailing and choices when the wall is less than perfect. The solerelief is built in - saving you time. The material is a high gradealuminum that provides good wear and strength. Shoes aresymmetrical.


An addition to the Comfortseries that offers a lighterweight option. Key designfeatures include - rolledtoe and branches, betterbreakover improvescoordination of movement,optimizes balance, lesspressure on the tendons. Adequate thickness to provide strengthand durability. Toe insert to increase wear. Built-in sole relief.

Punched for E-head and 5 Combo. 0 & 1 – E-4 Slim; 2 & 3 – E-5Slim.

Front - Unclipped - 4x0, 000, 00, 0, 1, 2, 3

Front - Quarter Clipped - 000, 00, 0, 1, 2, 3, 4

Front - Side Clipped - 00, 0, 1, 2, 3

Triumph Aluminum Clipped

Triumph AluminumUnclipped

25


Triumph aluminum egg barsoffer all of the popularfeatures of the Triumphseries - with the additionalsupport that ischaracteristic of barshoes.Shoes are symmetrical.

Punched for 4-1/2 Regular,5 Race or 5 Slim.

Triumph Degree has thesame features of theTriumph Aluminum flatshoes - with added lift forimproved performance.Shoes are symmetrical.

Punched for 4-1/2 Regular,5 Race or 5 Slim.

Triumph Aluminum Egg Bar

Front - Quarter Clipped - 000, 00, 0, 1, 2, 3

Front - Unclipped - 000, 00, 0, 1, 2, 3


ALUMINUM TRIUMPH, CENTURY AND COMFORT4x0 4-3/8 4-1/4 11-3/4000 4-1/2 4-1/2 12-1/200 4-3/4 4-7/8 13-1/80 5 5 13-3/41 5-1/4 5-1/4 14-1/42 5-1/2 5-1/2 15-1/83 5-5/8 5-3/4 15-7/8 4 6-1/8 6-1/8 16-5/8

Triumph Aluminum Degree

26

ALUMINUM » RACINGKERCKHAERT HORSESHOES

The Kings Plate is used inturf racing and is oftenused in the early trainingstages of the race horse. Itis also a very good shoe forthe western pleasure showhorse and smaller hunters.The features of this shoeinclude a flush toe insert,sole relief, good nailplacement with plenty of options, and a heel taper that savestime. The web of the shoe is slightly wider providing a good baseof support and strength to prevent spreading.

Kings Plate (Flush Toe)

The Kings Low Toe style offers another option for dirt tracks. Thetoe grab is 3/16" (3.9 mm) above the surface of the shoe.

Kings Low Toe (3.9 mm)

The Regular Toe is used primarily on dirt tracks. The toe grab is1/4" (5.5 mm) above the surface of the shoe. The hind pattern isoften used in conjunction with other styles of front shoes. The webof the shoe is slightly wider providing a good base of support andstrength to prevent spreading, especially on "stall kickers."

Kings Regular Toe (5.5 mm)

Front or Hind - Unclipped - 3, 4, 5, 6, 7, 8

Front - Unclipped - 3, 4, 5, 6, 7, 8

The XT version of the Kings Plate is also allowed on many turftracks. Commonly used by trainers when horses may race either onturf or dirt. Toe grab is 3/32" (2 mm) above the surface of shoe.

Kings XT (2 mm)

Front or Hind - Unclipped - 2, 3, 4, 5, 6, 7, 8

Front - Unclipped - 2, 3, 4, 5, 6, 7, 8

Hind - Unclipped - 4, 5, 6, 7, 8

All Kings Plates are symmetrical and are punched for 3-1/2 Race, 3-1/2 Race XL, 4-1/2 Race or 4-1/2 Slim.

27


This is a hind patternshoe used most oftento raise the heels on ahorse that has atendency to run downbehind. Available inhind pattern only, itcomes with two toegrab styles; XT andRegular toe. TheRegular toe is alsoavailable with toe clips.

Kings Degree Hind XT (2mm) andRegular Toe (5.5 mm)

XT Hind - Unclipped - 4, 6, 7

RT Hind - Unclipped - 4, 5, 6, 7

RT Hind - Toe Clipped - 4, 5, 6, 7

This outer rim style has the classicKings shape, rounder in the toeand quarters. Used primarily onThoroughbred racehorses, theOuter Rim offers a lot of traction.Front only.

Kings Outer Rim XT (2 mm)

Racing markets in various parts ofthe world have found clips to beextremely useful in keeping shoessecure. The North American racingmarket has also been moving inthis direction. The side clippedKings plates are available in aflush toe style with wider web foradditional support.

Kings Extra SoundClipped

Front - Unclipped - 4, 5, 6


All Kings Plates are are punched for 3-1/2 Race, 3-1/2 Race XL,4-1/2 Race or 4-1/2 Slim.

28


The Synergy shoe is availablewith an XT insert only (2mm). This shoe easesproblems that occur onsynthetic surfaces as a resultof too much traction usingbeveled aluminum that comesto the top of the insert infront of the toe. Synergy XTFronts and Hinds can be used on any track surface, including thoserequiring a toe grab of no more than 2mm. Hinds are also availablewith toe clips.

Front and Hind - Unclipped - 3, 4, 5, 6, 7

Hind - Toe Clipped - 4, 5, 6, 7

The Fast Break series is availablewith a flush toe insert or XT toegrab (2mm). The narrower pattern,with a slight radius already in thetoe has met with accolades. Toptrainers are finding this to be adream, especially on youngerhorses. Less stress on the upperlimb, and better hoof condition aswell, make it an excellent option onthe racetrack.


XT Front - Unclipped - 4, 5, 6, 7

Fast Break & Fast Break XT

Synergy XT (2 mm)

The Syntra series is a uniqueKerckhaert design, excellent fortraining and racing on dirt tracks;allowing easier breakover whilestill providing the traction neededfor coming out of the gate. Withbeveled aluminum coming to the top of the insert in front of the toegrab and a rolled toe, this versatile shoe is also a good choice forracing on synthetic surfaces where a regular toe is allowed (5.5mm).This is a hind pattern with toe clip only.

Hind - Toe Clipped - 4, 5, 6

Syntra Regular Toe

Synergy, Syntra, Fast Break and Fast Break XT are symmetricaland are punched for 3-1/2 Race, 3-1/2 Race XL, 4-1/2 Raceor 4-1/2 Slim.

29


The Traditionseries racingplates fromKerckhaert offerthe NorthAmerican marketan option forshoeing stylesand feet that require a narrower pattern than the Kings. The maindesign differences are the shape, a slight taper in the width fromtoe to heel, a nail pattern that is spread and punched slightlyfiner. This has met with a good response from farriers in themarket. They are finding that the Tradition and the Kings shapehave a place in their trucks due to the wider variations of frontshaped feet.

TraditionSeries

2 mm toe grab, allowed on turf and synthetic tracks throughoutNorth America. Front and hind patterns.

Tradition XT Toe (2 mm)

Front - Unclipped - 3, 4, 5, 6, 7, 8


3.9 mm toe grab, allowed on all dirt tracks and some syntheticsurfaces in North America. Available unclipped and front patternonly.

Tradition Low Toe (3.9 mm)


5.5 mm toe grab, allowed on most dirt tracks. Commonly used onfront feet of racing Quarter Horses. Front and hind patterns.

Tradition Regular Toe (5.5 mm)



8 mm toe grab, used behind on some Thoroughbreds on dirt tracksand many racing Quarter Horses.

Tradition Quarter Horse Toe (8mm)


All Tradition Series shoes are symmetrical and are punched for 3-1/2 Race, 3-1/2 Race XL, 4-1/2 Race or 4-1/2 Slim.

Tradition Regular Toe and XT Clipped

30


Light and Heavy. Whether you’re shoeingfor the Keeneland select sale or putting thefirst shoes on the “runner" down the road,the DR 15x7 or Kings DR 16x8 will fit thebill. The shoe shapes, combined withexcellent nail placement and fit, makeshoeing the yearling or two year old a lot easier.

The Tradition clipped shoeshave hit the market at a fullgallop. They are excellentin stall situations whereconcrete or cement block isthe construction type. Theclips of the Kerckhaertshoes are recognized fortheir strength andappropriate size.

Steel Training

XT - Hind - Toe Clipped - 4, 5, 6, 7

Regular Toe - Hind - Toe Clipped - 4, 5, 6, 7

Front - DR 15x7 - Unclipped - 24, 25, 26, 27, 28, 29, 30

Front - Kings DR 16x8 - Unclipped - 27, 28, 29, 30, 32

24 25 26 27 28 29 30 32

Race Size » 0 1 2 3 4 5 6 7

The Legendary shoe is a front onlypattern that provides additionalthickness for strength and wearwith high grade aluminum. Itfeatures wide Sole Relief andbeveled heels with toe nailposition that allows use of a nailpuller. Sand blasted foot surface.

XT - Front - 4, 5, 6, 7

Tradition, Legendary and Steel Training shoes are symmetricaland are punched for 3-1/2 Race, 3-1/2 Race XL, 4-1/2 Race or4-1/2 Slim.

Legendary XT (2mm)

31


The material of the BlueBond withstands thepunishment of the track. Thenail holes are alreadypunched through thematerial and a sole relief isbuilt-in, saving time.

Blue Bond

Applied by No-Vibe, this bonded shoe is known throughout themarket for the success it’s seen. The Yellow Pads are available onKerckhaert, the finest race plates in the market.

No-Vibe

Kings XT - Front - Unclipped - 3, 4, 5, 6, 7, 8

Kings Low Toe - Front - 4, 5, 6

Kings Outer Rim XT - Front - Unclipped - 4, 5, 6

Tradition XT - Front - Unclipped - 4, 5, 6, 7

Tradition XT - Front - Toe Clipped - 4, 5, 6

Kings XT - Front - 3, 4, 5, 6, 7

Outer Rim - Front - 6, 7, 8

Tradition XT - Front - 4, 5, 6, 7

A race plate designed to allowfor absorption of pressurefrom the heels and bars.These specially designedplates feature the Blue Bondmaterial in a “drop-down"design which adds very littleweight to the shoe.

Smart Bond™

Tradition XT – Front – Unclipped - 4, 5, 6, 7

Blue Bond, Smart Bond™ and No-Vibe are symmetrical and arepunched for 3-1/2 Race, 3-1/2 Race XL, 4-1/2 Race or 4-1/2Slim.

32



KINGS RACE PLATESFront2 4-3/8 4-1/8 11-3/83 4-5/8 4-3/8 11-3/44 4-7/8 4-1/2 12-1/25 5 4-5/8 12-3/46 5-1/4 4-7/8 13-1/27 5-3/8 5 13-7/88 5-5/8 5-1/2 15 9 5-1/2 5-3/4 15-1/4

KINGS, TRADITION, SYNERGY & SYNTRA RACE PLATES

Hind

2 4-1/4 4-1/8 11-1/83 4-1/2 4-3/8 11-5/84 4-5/8 4-1/2 125 4-3/4 4-3/4 12-5/86 5 5 13-1/47 5-1/4 5-1/8 13-7/88 5-1/2 5-1/4 14-1/4

TRADITION, SYNERGY & LEGENDARY

Front

3 4-1/2 4-3/8 11-3/44 4-5/8 4-1/2 12-1/45 4-3/4 4-3/4 12-5/86 5 4-7/8 13-1/47 5-1/8 5-1/8 148 5-5/8 5-1/2 15-1/8

Quarter Horse Toe: 8 mm

Regular Toe: 5.5 mmLow Toe: 3.9 mm

XT: 2 mm

Flush: 0 mm

Toe Grab Measurements

33

BAR SHOESfarrierproducts™

SX-7 and SX-8 Egg BarOur bar shoes are carefullyfabricated using the Kerckhaertshoes and the same steel for thebars. Available in a variety ofstyles, these bar shoes havebecome the most popular brand in North America. The SX-7 arethe lighter shoes in the series. Commonly used in the quarterhorse and light horse market. The SX-8 is used in a variety ofdisciplines, especially where strength and good support arerequired. SX-7 and SX-8 Bar Shoes are symmetrical.

SX-7 are punched for 4-1/2 Regular, 5 Race or 5 Slim, dependingon size. SX-8 are punched for 5 City, 5 Slim or 5 Combo.

SX-7 & SX-8 Heart Bar

SX-7 - Front - Unclipped - 00, 0, 1, 2

SX-7 - Front - Quarter Clipped - 000, 00, 0, 1, 2

SX-8 - Front - Quarter Clipped - 00, 0, 1, 2, 3, 4

SX-8 - Hind - Side Clipped - 00, 0, 1, 2, 3, 4



SX-7 & SX-8 Straight Bar



Steel Triumph Egg BarExcellent shoe for event horses.

Punched for 5 City, 5 Race and 5 Slim.


34

BAR SHOESfarrierproducts™

Providing an option for the very large foot,this 22x10 mm shoe is available unclippedonly.

Punched for E-head.

The TDR is made with approximately 3/4"half-round stock. This gives additional helpwith breakover while giving plenty ofsupport.

This is a clipped shoe that has similarsteel sizes to the SX-8.

Punched for E-head.

The Standard is the most basic bar shoe inthe farrierproducts™ line. It is available ina one shape pattern without clips. Aversatile shoe, this series can be shapedfor front or hind feet. Shoes aresymmetrical.

Size 000 punched for 5 Race or 5 Slim. Sizes 00, 0, 1 and 2punched for 5 City or 5 Slim.

Standard Egg Bar

DF Egg Bar



Hind - Side Clipped - 0, 1, 2, 3

Half Round Egg Bar

SSP Egg Bar

3/4" (18x9) - Unclipped - 0, 1, 2

Front - Unclipped - 5

This clipped shoe features greater groundsurface than a true half round to easebreakover.

Punched for E-4 Slim and E-5 Slim.

Classic Roller Egg Bar

Front - Clipped - 00, 0, 1, 2, 3 (22x8), 3 and 4 (24x8)

High quality nail designed by KerckhaertHorseshoe Company with precise andconsistent specifications that provideconsistent driving, excellent points andoutstanding finish.

Available in 2015: 10 Combo.

5 R

ACE (47.0

mm) Ú

5 C

ITY (50.0

mm) Ú

5 R

EGULAR (50.0

mm) Ú

6 R

EGULAR (54.0

mm) Ú

3-1

/2 R

ACE X

L (41.0

mm) Ú

3-1

/2 R

ACE (38.5

mm) Ú

LX-5

0 (50.0

mm) Ú

LX-5

5 (53.5

mm) Ú

LX-6

0 (55.0

mm) Ú

5 S

LIM

(50.0

mm) Ú

5 C

OM

BO

(49.5

mm) Ú

5 C

OM

BO

SLIM

(52.5

mm) Ú

6 S

LIM

(54.0

mm) Ú

6 C

ITY (53.0

mm) Ú

E-8

(63.0

mm) Ú

E-7

SLIM

(61.0

mm) Ú

E-6

SLIM

(57.5

mm) Ú

E-5

SLIM

(54.0

mm) Ú

E-4

SLIM

(51.0

mm) Ú

E-3

SLIM

(47.5

mm) Ú

E-2

SLIM

(45.5

mm) Ú

4-1

/2 R

ACE (44.0

mm) Ú

8 R

EGULAR (63.0

mm) Ú

35

HORSESHOE NAILSLIBERTY

7 R

EGULAR (59.0

mm) Ú

LX-6

5 (57.0

mm) Ú

LX-7

0 (59.0

mm) Ú

5 S

LIM

XL (52.5

mm) Ú

A wide range of nails produced forsuperior quality and performance.Vector nails are packaged in durableplastic containers with color codedlabels indicating the different nailstyles. All boxes contain 250 nails. 5 Race, 5City and 5 Slim are also available in boxescontaining 100 nails. Many nail sizes areavailable in Farrier Packs - containing 1,250nails.

36

HORSESHOE NAILSVECTOR

E-6 SLIM Ú

E-5 SLIM Ú

E-4 SLIM Ú

E-3 SLIM Ú

VX-60 Ú

VX-50 Ú

6 CITY Ú

5 CITY Ú

5 SLIM XS Ú

5 SLIM Ú

REGULAR HEAD 4-1/2 Ú

SPECIAL 5 Ú

SPECIAL 4-1/2 Ú

RACE 3-1/2 XS Ú

RACE 5 Ú

RACE 4-1/2 Ú

RACE 3-1/2 Ú

RACE 4 1/2 XS Ú

4-1/2 SLIM Ú

REGULAR HEAD 5 Ú

REGULAR HEAD 6 Ú

Vector V-TrakThe consistency of the hard facing combinedwith the high tensile strength of the Vectornails has produced a traction productthat has met the demands of theprofessional farrier. Prices are very competitive.

Available in sizes 4-1/2 Race, 5 City, 6 City and E-4Slim. Packed in 100 piece plastic boxes.

37

RASPSBELLOTA

The Bellota brand has been a leader inthe North American market since theearly 80’s. We are pleased to offerthese products through our farrierproducts™ dealers.

Bellota Rasps, Filesand Tools

Top Sharp Rasp The aggressive design of the file side on the Top Sharp lets you getin and get out with maximum results.

Classic Rasp The smooth cut of the classic file side is the best choice for asmooth finish.

Razor RaspLike its name implies, the rasp side of the Razor offers an extremecut when compared to other Bellota rasps, while the file side isalso coarser. This 14" rasp incorporates a tooth design to reduceclogging and to retain its sharpness.

38

RASPS AND FILESBELLOTA

Raptor RaspThe extra width of this rasp – 1/2" wider than other Bellota Rasps –provides a greater cutting surface. The 14" Raptor features a maximumcut on the rasp side; with a coarse cut on the file side.

Mini RaspLike the Top Sharp, the aggressive design ofthe file side on the new Bellota Mini Rasp lets youget in and get out with maximum results - but has anoverall length of 13" - making it very handy for working on foals,ponies and miniature horses. Handle is included.

6" and 8" Knife FilesMill bastard with 2 round edges. Each file is checked, one by one,to ensure quality and provide perfect filing. All Bellota files areprotected by a rust proofing treatment.

Top Finish File Farriers looking for a finish flat file have agreedthat the 14" Top Finish File exceeds theirexpectations. One side is coarse, with the otherbeing fine.

Pipeliner and Half Round FilesThis is the tool preferred by many competitors whenfinishing the shoes and foot. The 14" Pipeliner Fileoffers a single cut as opposed to the double cutdesign of the 14" Half Round File.

39

TOOLSBELLOTA

RASPSMERCURY

Mercury Rasps• Produced according to

the highest standards • Position of the teeth

on the rasp side and the unique composi-tion of steel ensuresthe rasp will staysharp longer

• Excellent reviews fromfarriers

Hammers• 6 oz. Driving Hammer• Hammer Handle Replacements• Cross Pein Hammer (1.25, 1.61, 2 lb.)

Other Tools from Bellota• 9" Nail Cutter• Wood Rasp Handles (Clear)• Half Round 14" File• Center Punch• Wire Hoof Brush• Drive-On Handle for Rasps and 14" Files• Drive-On File Handle for 6" & 8" Files

40

TOOLSFootPro™

A new 12" nipper hasbeen added to theFootPro™ line, featuring alarger head than theexisting FootPro™ 12"nipper and the reins arerounded in the same fashion as the 14" nipper. This tool workswell for farriers that prefer a larger head but don't want thelength of a 14" nipper. Nippers in the FootPro™ line are 12"Regular, 12" Race Track, 14", 15" and 14" Race Track. Thesetools are competitively priced and are backed by our qualityservice and standard warranty.

FootPro™ Nippers

FootPro™ Angled ClincherThe angled, ergonomic design of theFootPro™ Clincher allows easier clinchingwith less stress on your wrists. The teeth ofthis tool have proven to be extremelydurable under the most trying ofcircumstances.

FootPro™ is a brand developed by FPDbased on years of feedback fromprofessional farriers. The detailed finishby skilled craftsmen is a trademark forthe FootPro™ line that focuses onengineering using the highest quality of steel and heattreatment. All FootPro™ tools are fully polished foradditional comfort.

FootPro™

™

A traditional style saddle horse clincher has been addedto the FootPro™ tool line. Made of high grade tool steel,this clincher is fully polished, providingcomfort and reliability.

FootPro™ Saddlehorse Clincher

41

TOOLSFootPro™

The design of the FootPro™ 1-3/4 lb. and 2 lb. hammersdraw on ideas provided by professional farriersregarding the balance and details of a wellperforming forging hammer. All details offorging, machining, tempering andfinishing were carefully scrutinizedby respected tradesmen.Hammers are forged with highquality steel, are 16" in overalllength, fully polished and feature a1-5/8" diameter face.

FootPro™ Silicone Wrap for Tool HandlesThe FootPro™ handle wrap is a versatile tape that workswell as a handle wrap. The tape will fuse onto itself aftertwo minutes and will not allow repositioning. It has avery high tensile strength, will not melt up to 500 Fº,stays flexible to -60 Fº and will stretch up to 300%.This tape resists UV rays and weathering and isbetter than duct tape and other wraps. Thetape is available in 10 ft. rolls.

FootPro™ Rounding Hammers

FootPro™ Nail PullerThe FootPro™ Crease Nail Puller is designed forhigher leverage with less effort. This tool is 11-1/2"long, made using high-grade tool steel and is fullypolished for handling comfort. Used properly, thistool will provide long-term service and make thepulling of nails a much easier task.

APRONS

Excellent cover to inside of legs with velcrofastenings at thigh and waist.Waist adjustment with 2" buckleand pocket on each leg.Combines state of the arttechnology in flame retardantfinishing with the hardwearingand aesthetic properties ofcotton rich polyester blends.

The Model K Light Apron is made withProban fire retardant material that islight but tough. It is reinforced in thecrotch area and the leather pads givegood coverage. It has two knifepockets and the belt snaps at the hipand has an adjustable buckle as well.The Model K Leather has two knifepockets and the belt snaps at the hipand has an adjustable buckle as well.

Gibbins Tear-Away and HipsterFlamemaster

fp™ Aprons - Lightand Leather

A design similar to our Model K aprons but withimproved fit, material quality and design. Outsideof leg is wider, with knife pockets dropped lowerso they are out of the way when working.FootPro™ Aprons are manufactured in the USA andare a light-weight material with leather pads.

FootPro™ Aprons

42

M E A S U R E M E N T STear-Away HipsterFlamemasterShort - Length - 22"Long - Length - 28"

Tear-AwayFlamemasterShort - Length - 26"Long - Length - 32"

M E A S U R E M E N T SFootPro™ ShortLength - 26"

FootPro™ LongLength - 31"

M E A S U R E M E N T SModel K Light ShortLength - 26"

Model K Light LongLength - 30"

Model K Leather ShortLength - 26"

Model K Leather LongLength - 30"

43

Excellent cover to inside of legs with velcrofastenings at thigh and waist. Waistadjustment with 2" buckle and pocket oneach leg. Specially designed for use byfarriers, it retains its moisture and tends toleather-up with use. Strong and supplewithout excess weight.

Gibbins Tear-Away Superthistle

Excellent cover to inside of legs withvelcro fastenings at thigh and waist.Waist adjustment with 1.5" buckle andpocket on each leg. Specially designedfor farriers, it is constructed from top ofthe range suede, it retains its moistureand tends to leather-up with use. Strongand supple without excess weight.

Gibbins Closed FrontWrap-Round SuperthistleHipster Long Apron

Gibbins Back PadsThese supportive, fleece-linedback pads fit any Gibbins apronand are designed to distributepressure across the back, creatinga more comfortable fit. The padis washable and available in medium andlarge. The approximate dimensions are:Medium 10"x5" and Large 15"x6.75".

M E A S U R E M E N T STear-Away Superthistle ShortLength - 26"

Tear-Away Superthistle LongLength - 34"

M E A S U R E M E N T SClosed Front Wrap-Round Hipster Superthistle LongLength - 30"

APRONS

fp™ Outer Rim ClincherThe custom design of fpTM's new OuterRim Clincher allows the jaw to reach thenail head even when below the outer rim. Theclincher is polished, forged from high quality tool steel, precisionmachined and heat treated for strength and durability. Excellenttool for race track farriers.

44

TOOLSfarrierproducts™

fp™ 12" Pull Off Polished

fp™ Nail Puller Black

fp™ Saddlehorse ClincherForged from high quality tool steel, precision machined, and heattreated for strength and durability. Fully polished.

They are used in removal of shoes and can also be used to cutnails without damage to the blades. Fully polished.

Get in there and get the nails out, without hurting the hoof wall.Perfect for creased and fullered shoes.

45

TOOLSfarrierproducts™

fp™ Knife Sharpener

fp™ Brass HoofBalance Ruler

24" brass ruler - folds in themiddle; inches on one side,millimeters on the other.Typically used in measuringsteel when forging shoes.

fp™ Brass Ruler

High quality knife sharpener ismade of diamond coated solidsteel with plastic handle.

12" brass ruler - inches on oneside, millimeters on theother. Can be used to check themedial/lateral balance of the foot.

Our aluminum rasp handles have twosets of hex head set screws to securelyhold rasp in place. Available in 3 sizes:1-1/4", 1-1/2", and 1-3/4". Comes withL shaped hex wrench.

fp™ Rasp Handles

FDick NylonHammers35mm head diameter has ashorter handle than FDick40mm Nylon Hammer.Handy size for use with anundercut or cutting clinches.40mm head diameter isparticularly useful when usedwith a toeing knife and blockingand cutting clinches. FDick NylonHammers extend the life of the tool being struck and creates lessconcussion for the horse.

46

HOOF KNIVES

• Made of knife-grade, hardenedcarbon steel

• Unique diamond wood handle

• Right or left handed• Blade length: 2-1/2"• Handle length: 5-1/2"


• Unique diamond wood handle

• Blade length: 2-1/4"• Handle length: 5-1/2"


• Curved blade• Narrower and longer wooden

handle

• Right or left handed• Blade length: 2-1/2"• Handle length: 5-7/8"

• Made in Germany• Made of high quality steel blade• Right or left handed


• Made in Germany• Made of high quality steel

blade

• Blade length: 3"• Handle length: 5-3/4"

Bloom Forge Regular & Offset Blade

Bloom Forge Loop

Bloom Forge Special Knife

fp™ Wide & Narrow Blade

fp™ Double Edge Right

• Slimmer diamond wood handle

• Offset blade

• Right or left handed• Blade length - 2-5/8"• Handle length - 5-1/2"

Bloom Knife Comfort Grip

47

HOOF KNIVES

• Made in Sweden• Right or left handed


• Made in Switzerland• Right or left handed

and Double Edge Right


Victorinox Regular & Double Edge

Frost (Mora) Wide, Narrow and Double Edge

• Made in Germany • Blade length: 3"• Handle length: 5-3/8"

FDick Double Edge Right

• Made in Germany• Right or left handed

• Blade length: 3"• Handle length: 5-3/8"

FDick Wide & Narrow

• Made in Germany• Special contoured handle• Right or left handed


FDick Gripmaster

• Made in Germany• Right or left handed


FDick Ascot

48

ITEMSMISCELLANEOUS

Knipex ToolsFarriers recognize the tough, durable construction of this brand ofcutters. You can count on these cutters to hold up to the dailydemands of cutting horseshoe nails.

Magnets• 2" Round Magnet• 2 5/8" Round Magnet• 3 1/8" Round Magnet• Hammer Handle Magnet• Liberty Wrist Magnet

KNIPEX 8" ULTRA CUT

KNIPEX 8" NAIL CUTTER

KNIPEX 12" POWER CUT

KNIPEX 12" CUTTER WITH CLINCH BLOCK

Jumbo Butcher Block BrushJumbo Flat Wire Block Brush with a woodhandle. 9-1/4" x 3-3/4". Wire trim length1-1/4". A great tool for cleaning scaleduring forging.

49

ITEMSMISCELLANEOUS

Rasp and File Handles• Twist-On Plastic (Orange & Green)

• Twist-On Wood (Long & Short)

• Drive-On Wood

• fp™ Aluminum Rasp Handles

• Bellota Wood Rasp Handles

• Drive-On Wood 6" and 8" File Handles

• Bellota Drive-On Rasp Handle for Raspsand 14" Files

• Bellota Drive-On File Handle for 6" Files

• Bellota Drive-On File Handle for 8" Files

Replacement Handles• Bloom Forge - 13-1/2" and 14-1/2" Driving Hammer Handle• Bloom Forge - 18" Rounding Hammer Handle• Bloom Forge - Punch and Creaser Handle• fp™ - 16" Wide Grip Hammer Handle (fits Bloom and FootPro™)• FootPro™ - 16" Hammer Handle• Diamond - 36 oz. Rounding Hammer Handle• Horsehead - 8 oz. and 12 oz. Hammer Handle

Bellota WireHoof BrushUsed for cleaning the foot beforebeginning the trimming process.

Kerckhaert Tool Bag• Canvas tool bag is 2'x1' when zipped shut• Adjustable, removable shoulder strap

included• Multiple pockets for better organization

of tools• Black with Kerckhaert logo

50

GRINDERS AND ABRASIVES

Attachments for 1/2 HP & 3/4 HP Grinders• 7" Aluminum Heel Finish Disc with Spacer• 6" and 10" Expander Wheel with Guard

Baldor Buffers and Grinders• 1/4 HP Buffer (1800 RPM)• 1/2 HP Grinder and 3/4 HP Grinder (3600 RPM)

1/4 HPBuffer

1/2 HPGrinder

ExpanderWheel

Heel FinishDisc

FootPro™ 2"x36" & 2"x48" GrindingAttachments• FootPro™ 2"x36" and 2"x48" grinder attachments

• The 8" contact wheel makes the attachment more compact andproduces a significantly higher belt speed, in the same way theExpander wheels do

• Fits any 1/2 hp or larger grinder with a shaft at least 2-1/2"long and 5/8" in diameter

• Wide range of both 2"x36" and 2"x48" belts that fit these units

51

GRINDERS AND ABRASIVES

Knife Sharpening Products• 6" Buffing/Sharpening Wheel• 6" Felt Wheel with Groove• Buffing Compounds• 6" Cotton Wheel• 6" and 8" Sisal Wheel• 8" Muslin Wheel• 6" Blending Wheel - Used for the initial sharpening of hoof

knives and blending the edge of the knife blade.• FootPro™ 6" Economy Wheel - New!

Hoof Finishing ProductsHoof Buffer AttachmentReplacement Sleeves (40, 60 and 100 grit) & Bladders

Abrasive Belts and DiscsWe offer a wide range of abrasive beltsand discs specifically selected for thefarrier’s use. VSM and 3M are the highquality brand names that we feature.

• Blue Zirconia - 2x36", 2x48", 6" & 10"Expander Wheels

• Ceramic - 2x36", 2x48", 6" & 10"Expander Wheels

• 3M - 6" & 10" ExpanderWheels

• 4-1/2" and 7" Flap Discs

• 3M Cubitron - 2x36",2x48", 10" ExpanderWheels

Natural Rubber BeltCleaning Stick• Used to clean and extend the life of

grinding belts• Especially useful before and after

grinding aluminum• Size: 8" x 1-1/2"

3M CubitronBelt

Cotton WheelSisal Wheel Blending Wheel FootPro™ 6"Economy Wheel

NEW!

52

TRACTION PRODUCTSTUNGSTEN AND fp™

As with the Drive-In Studs, youseat the tapered shaft of the pininto the hole. Holes may bedrilled in toe or heel of the shoe.Installation requires the use of adrill bit - included with everypackage of 100 pins.

Countersink Drill BitThis German-made Countersink Drill Bit is receivingvery positive comments from farriers who are using it. Theoverall length of the bit is 3-1/4". With the shorter bit thereis less chance of breakage compared to longer bits. For use with a3/8" tap. Excellent for both 8 mm and 10 mm shoes.

Simply drill with a bit and seat the tapered shaftof the stud into the hole. It’s amazinghow much confidence your horses willgain when on blacktop or concrete. Thestuds should also give good traction for trailriding in terrain with large rocky footing. 50pieces per pack.

Drive-In Studs and Tungsten Carbide PinsFor those situations when you need only enough traction toprevent sliding or slipping on hard surfaces, Tungsten Carbide Pins,Drive-In Studs and Vector V-Trak nails are very simple to apply.

Tungsten Pins

V-Trak Nails

Drive-In Studs

Vector V-Trak are available in sizes 4-1/2Race, 5 City, 6 City and E-4 Slim. Packed in 100 piece plastic boxes.

Liberty E-Slim non-slip tungstennails are available in sizes E-3 Slim, E-4 Slimand E-5 Slim.

Traction Nails

53

TOOLSBLOOM FORGE

Roy Bloom is recognized throughoutthe industry for the attention todetail and performance of theproducts he manufactures. Toolsmade by Bloom Forge come to youready to work in your application.As a farrier, Roy understands the use of the tools. As ablacksmith, he understands the unique characteristics of thematerials and stresses they endure in use. Bloom Forge offers themost extensive line of commercially available forging and shoeingtools in the North American market.

• Rounding Hammer (1-3/4, 2, 2-1/2 lb.)

• 1-3/4 Clipping Hammer

• Cross Pein Hammer (2 lb.)• Replacement Hammer Handles

• Long Pritchel• H-13 Pritchel• City Forepunch

• Small Bob Punch• Stud Punch (5/16" Round)

• Fire Tongs (1/4", 5/16", 3/8", 1/2")

• Hot Fit Tongs

• Specialty Tongs (Rat Tail, Rose)

• Replacement Tong Rivets

CITY FOREPUNCH

FIRE TONGS

ROUNDING HAMMER

Bloom Forge Straight Tools

Bloom Forge Tongs

Bloom Forge Hammers

CROSS PEIN

• Used when forging handmade shoesto establish the location of the toenail holes

Bloom Forge NailLayout T-Square

54

TOOLSBLOOM FORGE

• City Forepunch• Regular Head Forepunch• E-Head Forepunch• City Drift• Small Bob Punch• Large Bob Punch• Creaser (Right & Left)• Combo Cut (Right & Left)• Foot Stand Combo Cut (Right)• Clinch Undercut (Right & Left)• Clinch Cutter (Right & Left)• Clinch Block• Forepunch Gauge

• City Forepunch• Regular Head Forepunch• E-Head Forepunch• City Drift• Small Bob Punch• Creaser

• Creaser - Draft• Center Punch• Stud Punch (5/16" Round)• Hot Cut• Replacement Wood Handles

DRIFT

CREASER

CITY HEADREGULAR HEAD

CREASER STUD

HOT CUT E-HEAD

Bloom Forge Wood Handle Tools

Bloom Forge Steel Handle Tools

FOOT STANDCOMBO CUT RIGHT

55

TOOLSNORDIC FORGE

Nordic has taken huge steps forward inmanufacturing a high quality, mid-range pricetool line under the “Viking" brand. The efforthas been noticed throughout the world. Theyhave a range of nippers, clinchers, hammers,and other farrier tools.

Nordic Forge

Nordic Nippers12" Nipper (Polished & Semi-Polished)14" Nipper (Polished & Semi-Polished)14" Race Track Nipper (Polished & Semi-Polished)15" Nipper (Polished & Semi-Polished)

Nordic ClinchersAngled Clincher (Semi-Polished)Straight Clincher (Semi-Polished)

Nordic Hammers10 oz. Driving Hammer12 oz. Driving Hammer14 oz. Driving Hammer1-1/2 lb. Rounding Hammer2 lb. Rounding Hammer

56

HOOFCARE PRODUCTSVETTEC AND HAWTHORNE

Hawthorne ProductsPine TarVenice TurpentineIchthammolLiquid Sole PakSole Pak (Individual Patties, 4 & 8 lb. buckets)

Vettec ProductsEqui-PakEqui-Pak CSEqui-Pak SoftAdhereEqui-BuildSil-PakSoleGuardSuper Fast

Allen's ProductsBlue Powder - A medicatedthrush preventative, developed byfarrier Todd Allen. The activeingredient is copper sulfate and thepowder is sprinkled on the frog andsole area of the foot as a preventative measure. Alsoused as a treatment for thrush. 9 oz. bottles.

Super Mesh - A heavy-duty mesh material that can be used inconjunction with Vettec products. This mesh provides extra strengthfor times when the mesh offered by Vettec is not quite strong enough;for instance very rough terrain or larger feet. Each piece isapproximately 7" x 6-1/2" and packed 6 pairs to a pack.

Welding FluxIron Mountain - general useRed Mountain - brazingWhite Mountain - coal

57

EDUCATIONAL ITEMS

Since its founding in 1990, FPD has actively engaged in providingprograms and resources that encourage and promote educationalexcellence throughout the farrier industry. FPD is unique andprogressive in their commitment to hoof care education for allfarriers, veterinarians and others involved in the equine world.

Books

Hoof Problems by Rob van Nassau

The CompleteHorseshoeing Guideby Robert F. Wiseman

Hickman’s Farriery by John Hickman &Martin Humphrey

The Principles ofHorseshoeing III by Dr. Doug Butler &Jacob Butler

Horse Gaits, Balance& Movement by Susan E. Harris

The Blacksmith: Ironworker & Farrier by Aldren Watson

Roy Bloom has produced a new version ofthe popular Book of Shoes. Including 150shoe diagrams and forging specifications,the latest version is printed on a heavy,coated paper guaranteed to hold up wellto the rigors of use in the field. Becauseit is bound in a three-ring binder, you canmove through the book with ease.

Bloom Forge Book of Shoes

Elementsof FarrierScienceby DonConfield

Understandingthe Horse’sFeetby JohnStewart

58

EDUCATIONAL VIDEOSHOT IRON PRODUCTIONS

Videos (DVD ONLY)Hot Iron Productions (HIP Inc.) wasfounded in the mid-90’s to produce highquality video footage for the farriermarket. Roy Bloom CJF and Dave FarleyCF were ahead of the curve in theindustry, conducting clinics throughoutthe US and Canada, using video to help attendees get all thedetails that were a part of their presentations. Bloom and Farleyhave each been shoeing horses for over 40 years and arerecognized among their peers as leading educators and craftsmenin the trade.

Balancing the Equine Hoof: Understanding the 12 Reference Points with Roy Bloom & Dave Farley

Shoeing the Jumperwith Roy Bloom & Dave Farley

Fundamentals of Forging # 1 – The Hammer, Tongs & Anvilwith Roy Bloom

Fundamentals of Forging # 2 – Basic Shoemaking with Roy Bloom

Fundamentals of Forging # 3 – Forge Welding Steel & Aluminum with Roy Bloom & Dave Farley

Fundamentals of Forging # 4 – Cowpies & Clips with Roy Bloom & Dave Farley

Tool Maintenance with Roy Bloom

Basic Shoe Modifications with Roy Bloom & Dave Farley

Kerckhaert Snow Rim Pads in two different materials - rubber(black) and polyurethane (clear) - are now available. Each pair isin an individually wrapped package.

• Kerckhaert Rubber Snow Rim Pad - Large and Medium Front• Kerckhaert Rubber Snow Rim Pad - Large and Medium Hind• Kerckhaert Urethane Snow Rim Pad - Large and Medium Front• Kerckhaert Urethane Snow Rim Pad - Large and Medium Hind

Kerckhaert Snow Rim Pads

59

HOOF PADS

FPD is the exclusive distributor of Dura-Shock Pads. We offer a fullrange of flat, wedge and rim pads. We also distribute the Lily Pad.Once taped on for immediate emergency support it creates aninstant heartbar effect without trauma to the foot.

• 1/8" Flat Pad • 3/16" Flat Pad• 5/32" Flat Pad • 11/32" Wedge Pad• 1/8" Rim Pad • 1/8" Double Rim Pad• Lily Pad

TEP Pads

60

Castle PlasticsWe are pleased to be a distributor forCastle Plastics – a leading manufacturer ofhoof pads. Castle takes pride in the innovation and quality ofproducts that they produce, including bar wedge pads, 2 and 3degree oval pads, snow ball pads, impak pads, pour pads, andwedges with frog support.

HOOF PADS

PRODUCTS DESIGNED TO WORK WELL TOGETHER.

To find a farrierproducts™ dealer near you and to view the full line of products available,visit www.farrierproducts.com, or call toll free at 1-800-468-2879.

J O I N T H E CO N V E R S AT I O NLike FPD on Facebook at www.facebook.com/FarrierProductDistribution

Visit The HoofWall™ blog at www.farrierproducts.com/blogFPD Field Guide for Farriers at www.farrierproducts.com/fieldguide

BLOOM FORGE TOOLS

farrierproducts™ TOOLS

BELLOTA RASPS

FOOTPRO™ TOOLS

farrierproducts™ BARSHOES

RANGER HORSESHOES

While every product in the farrierproducts™ group hasa unique purpose, they have been designed to provideoptimum results when teamed together. Only thehighest quality products are included in this group. Weknow, as a professional farrier, you won't settle for less.

KerckhaertSTEELSHOES

Kerckhaertaluminum

SHOES

LIBERTY NAILS VECTOR NAILS

ANATOMY OF ASMART TOOLBOX:

HORSESHOES AND NAILS TOOLS

P.O.

Box

132

8Sh

elby

ville

, KY

400

661-

800-

468-

2879

ww

w.fa

rrie

rpro

duct

s.co

mfa

cebo

ok.c

om/F

arrie

rPro

duct

Dist

ribut

ion

The

Hoof

Wal

l™

• w

ww.

farr

ierp

rodu

cts.

com

/blo

g

Scan

thi

s co

de w

ith y

our

smar

t ph

one

to le

arn

mor

e ab

out

FPD,

Inc

.

Documents

Fpdproductguide 2015 web