Upload
ngodang
View
215
Download
0
Embed Size (px)
Citation preview
FSH has been for some time recognised as a leader in electromechanical locking innovation. Examples included winning Engineers Australia Design Awards & ABC New Inventors for the FSH MEM product range. The FSH path of innovations now continues with the launch of the FSH EcoLine™ Product Range.
It is now an accepted scientific fact that carbon dioxide
(CO2 ) is destroying our planet.
With this in mind FSH has engineered a range of energy
saving high security electromechanical locking devices,
setting the trend in the Security industry worldwide.
These devices assist in reducing the carbon footprint
by drastically lowering the current draw (energy
consumption) by up to 80%.
The flow on effect with these substantial power
consumption savings also includes reduced wiring size
and far more importantly stand-by battery reduction
capacity. This translates into substantial cost savings in
tandem with a solid Carbon Footprint reduction.
In the design of these locking innovations FSH has
also taken into account the High Security aspects of
the devices. FSH designers have in fact enhanced
the product performance in that respect by adding
additional security monitoring functions.
The following products are part of the EcoLine™
EcoStrike ™ FES90MP
EcoMag™ ECO5700HS &ECO3500M
EcoLock™ VE1260
MEM Lock MEM2400 Series
FSH EcoLineEnergy Saving Electromechanical Locking Devices
EcoStrikeFES90MP
(Sleep-Mode)
Electric Strikes Australian Footprint
(Fail Safe Configuration)
CURRENT DRAW <15mA@24VDC 175-220mA@24VDC
EcoMagECO5700HS
(Sleep-Mode)
Standard 600kg Holding Force
ElectroMagnetic Locks
CURRENT DRAW 70mA@24VDC 250-260mA@24VDC
EcoMagECO3500M
(Sleep-Mode)
Standard 300kg Holding Force
ElectroMagnetic Locks
CURRENT DRAW 60mA@24VDC 230-250mA@24VDC
EcoLockVE1260
(Sleep-Mode)
Electromechanical Drop Bolts(Fail Safe
Operation)
CURRENT DRAW 15mA@24VDC Up to 1A@24VDC
MEM2400 Locking Device
Standard 600kg Holding Force
ElectroMagnetic Locks
CURRENT DRAW 120mA@24VDC 250-260mA@24VDC
COMPARISONS Eco Line Product Standard Devices
4
TECHNICAL DETAILS
PRODUCT FEATURES
• Releases with up to 35kg of Pre-Load/Side Load
• Motorised locking device
• Durability tested to 1.5 Mill. full pre-load cycles of 35kg
• Multi voltage from 10 to 30VDC
• Sleep Mode Current less than 15mA@12VDC
• Weather resistant
• Fully monitored including Reed Switch for door position
• Pre-drilled for extension lips
• Up to 1300kg holding strength
• 5 year warranty
• Guaranteed shock/hammer resistant
PRODUCT DESCRIPTION
The patented FES90M-P motorised High Security Electric EcoStrike with up to 35kg Pre-Load capability is a revolutionary electric locking solution. With a high Pre-Load /Side-Load tolerance and minimal energy consumption in ‘Sleep-Mode’ it is a truly “Green Locking Solution”.
The strike accepts voltages from 10 to 30VDC, is pre-drilled for extension lips and has a unique and simple fail secure (Power To Open)/ fail safe (Power To Lock) switch-over function.
The door strike provides 3 forms of monitoring:1. LSS (Lock Status Sensor)2. DSS (Door Latch Sensor)3. DPS (Door Position Sensor)
To utilise the Door Position Sensor monitoring function (DPS), FSH is providing special Mortice Lock Face Plates equipped with magnets, as separate items (see Accessories). These Face Plates work in conjunction with the FES90M-P built in Reed Switch.
The electric strike consumes current less than 300mA @ 12VDC at full 35kg pre-load only during locking and unlocking action. In the locked or unlocked state (Sleep-Mode), the electric strike consumes current less than 15mA@12VDC.
FES90MP comes with a 10mm strike lip as standard, to prevent possible personal injury and damage to clothing as with 15mm lips.
FES90M-P
PRODUCT FES90M-PHIGH SECURITY ELECTRIC EcoStrike™ WITH PRE-LOAD CAPABILITY – AUSTRALIAN FOOTPRINT
PART NO. FES90M-P
FUNCTION Mortice Mount, Power-To-Lock/Power-To-Release field interchangeable, 35kg of Pre-Load capability
HOLDING STRENGTH Up to 1370kgTested to 1.5Mill full 35kg pre-load cycles
VOLTAGE/CURRENTMulti Voltage 10-30VDC
Action Mode: 300mA@12VDC at full 35kg pre-load only during locking and unlocking actionSleep-Mode: 15mA @ 12VDC in locked or unlocked mode
APPROVALS4 hour fire rated to A.S. and B.S. Standards
CEC-TICK
MONITORINGLSS - Status Sensor of the internal locking mechanism
DSS - Door Latch Sensor, Door latch engaged within strike keeper DPS - Reed Switch Built-in, monitoring the door position
ENVIRONMENTAL Operational Temperature Range -20º to +60ºC
5
NEW GENERATION ELECTRIC AND ELECTRONIC LOCKING
PRODUCT DIMENSIONS AND INSTALLATION
122
122
122
10
5
24
26
28.517
5.6
39.5
122
26
10
28.53
23
5
138
122
122
PRODUCT DIMENSIONS
Latch front face
cut thruoutline
TEMPLATE
Position this line toyour marking.1mmclearance has beenadded.
5 sizes of extension lips are available5mm,10mm, 25mm, 50mm and 75mm
Depth of cut-out will vary dependant on width of door frame
Dep
th
Lipless
10mm LipStandard
15mm Lip
40mm
162mm
123.1mm
NOT TO SCALE 29.0
44.8
*These dimensions have a tolerance of +0.8mm/-0
176.0
Keeper
INSTALLATION
POSITION OF DOOR LATCH
122
122
122
10
5
24
26
28.5
175.
6
39.5
122
26
10
28.53
23
5
138
122
122
PRODUCT DIMENSIONS
Latch front face
cut thruoutline
TEMPLATE
Position this line toyour marking.1mmclearance has beenadded.
5 sizes of extension lips are available5mm,10mm, 25mm, 50mm and 75mm
Depth of cut-out will vary dependant on width of door frame
Dep
th
Lipless
10mm LipStandard
15mm Lip
40mm
162mm
123.1mm
NOT TO SCALE 29.0
44.8
*These dimensions have a tolerance of +0.8mm/-0
176.0
Keeper
INSTALLATION
POSITION OF DOOR LATCH
122
122
122
10
5
24
26
28.5
175.
6
39.5
122
26
10
28.53
23
5
138
122
122
PRODUCT DIMENSIONS
Latch front face
cut thruoutline
TEMPLATE
Position this line toyour marking.1mmclearance has beenadded.
5 sizes of extension lips are available5mm,10mm, 25mm, 50mm and 75mm
Depth of cut-out will vary dependant on width of door frame
Dep
th
Lipless
10mm LipStandard
15mm Lip
40mm
162mm
123.1mm
NOT TO SCALE 29.0
44.8
*These dimensions have a tolerance of +0.8mm/-0
176.0
Keeper
INSTALLATION
POSITION OF DOOR LATCH
122
122
122
10
5
24
26
28.5
175.
6
39.5
122
26
10
28.53
23
5
138
122
122
PRODUCT DIMENSIONS
Latch front face
cut thruoutline
TEMPLATE
Position this line toyour marking.1mmclearance has beenadded.
5 sizes of extension lips are available5mm,10mm, 25mm, 50mm and 75mm
Depth of cut-out will vary dependant on width of door frame
Dep
th
Lipless
10mm LipStandard
15mm Lip
40mm
162mm
123.1mm
NOT TO SCALE 29.0
44.8
*These dimensions have a tolerance of +0.8mm/-0
176.0
Keeper
INSTALLATION
POSITION OF DOOR LATCH
ORDER DETAILS & ACCESSORIES
PART NO. PRODUCT DESCRIPTION
FES90M-P High Security Electric Eco Strike with pre-load capabilities Australian Footprint monitored 10mm Lip
FES20-EL15 FES20 Extension Lip 15mm
FES20-EL25 FES20 Extension Lip 25mm
FES20-EL50 FES20 Extension Lip 50mm
FES20-EL75 FES20 Extension Lip 75mm
FES20MR·AUS Mortice Lock Faceplates with monitoring magnets for Aust. Lock Company Mortice Lock
FES20MR-DOR Mortice Lock Faceplates with monitoring magnets for Dorma Mortice Lock
FES20MR·KAB Mortice Lock Faceplates with monitoring magnets for KABA Mortice Lock
FES20MR-LEG Mortice Lock Faceplates with monitoring magnets for LEGGE Mortice Lock
FES20MR-LOC Mortice Lock Faceplates with monitoring magnets for Lockwood Mortice Lock
FES20MR-LOC-NS Mortice Lock Faceplates with monitoring magnets for Lockwood Narrow Style Mortice Lock
FES20MR-NOV Mortice Lock Faceplates with monitoring magnets for Novas Mortice Lock
FES20-Rebate Rebate Kit for FES20 Series (Stainless Steel)
6
TECHNICAL DETAILS
PRODUCT FEATURES
ECO5700HS
PART NO. ECO5700HS
FUNCTION Power To Lock (Fail Safe)
HOLDING STRENGTH Up to 680kg in “Alarm-Mode”340kg in “Sleep-Mode”
VOLTAGE/CURRENTMulti Voltage 10-26VDC
Sleep-Mode: 12VDC=140mA/24VDC=70mAAlarm-Mode: 12VDC=600mA/24VDC=300mA
MONITORING
Addressable Armature PlateDoor Status Monitoring Sensor (DSS)Lock Status Monitoring Sensor (LSS)
Early Warning Signial Output and Local Alarm Buzzer (EW)Exit Switch Delay Function
Long Distance Light Panel (LP)
SIZE Magnet: L= 268 W= 40 D= 73mmArmature Plate: L= 209 W= 6.2 D= 66mm
• Truly Green product
• Door and Lock Status Monitoring Sensor (DSS & LSS)
• Early Warning signal output and local alarm buzzer (EW)
• Multi Voltage 10-26VDC low power consumption (70mA@24VDC Sleep-Mode)
• Exit Switch Delay Function
• Long distance Light Panel (LP)
• Addressable armature plate
• Zero residual magnetism
• Anti-Tamper-Plate
PRODUCT DESCRIPTION
The patented ECO5700HS model is a high security power saving Electro-Magnetic Lock with an individually encoded addressable armature plate. The lock will only recognize its own armature plate to prevent the device from being compromised by false plates.
Under normal, non-alarm conditions, the ECO5700HS “EcoMag” operates in a low current `Sleep-Mode’ of 70mA@24V with a holding force of 340kg. In the event of an unauthorised attempt to open the door, the ECO5700HS “EcoMag” “wakes up” and goes into an Alarm Mode with full current of 300mA@24V applied to the device, instantly increasing the holding force to up to 680kg.
The EcoMag operates on multi voltage 10-26VDC, provides an Early Warning (EW) signal output, has a built-in local Alarm Buzzer, with full monitoring of Lock Status and Door Status, long distance Light Panel indicator and an Exit Switch Delay function.
The device is provided with the FSH patented Anti-Tamper-Plate as standard.
PRODUCT ECO5700HSHIGH SECURITY POWER SAVING ELECTRO MAGNETIC LOCKING DEVICE EcoMag™
7
NEW GENERATION ELECTRIC AND ELECTRONIC LOCKING
PRODUCT DIMENSIONS AND INSTALLATION
One way security dome nut
Anti-Tamper Plate
8
TECHNICAL DETAILS
PRODUCT FEATURES
ECO5700M
PART NO. ECO5700M
FUNCTION Power To Lock (Fail Safe)
HOLDING STRENGTH Up to 680kg in ‘Alarm-Mode’340kg in ‘Sleep-Mode’
VOLTAGE/CURRENTMulti Voltage 10-26VDC
Sleep-Mode: 12VDC=140mA/24VDC=70mAAlarm-Mode: 12VDC=600mA/24VDC=300mA
MONITORING
Door Status Monitoring Sensor (DSS)Lock Status Monitoring Sensor (LSS)
Early Warning Signial Output and Local Alarm Buzzer (EW)Exit Switch Delay Function
Long Distance Light Panel (LP)
SIZE Magnet: L= 268 W= 40 D= 73mmArmature Plate: L= 209 W= 6.2 D= 66mm
• Truly Green product
• Door and Lock Status Monitoring Sensor (DSS & LSS)
• Early Warning signal output and local alarm buzzer (EW)
• Multi Voltage 10-26VDC low power consumption (70mA @ 24VDC Sleep-Mode)
• Exit Switch Delay Function
• Long distance Light Panel (LP)
• Zero residual magnetism
• Anti-Tamper-Plate
PRODUCT DESCRIPTION
The patented ECO5700M model is a power saving Electro-Magnetic Lock.
Under normal, non-alarm conditions, the ECO5700M “EcoMag” operates in a low current `Sleeping Mode’ of 70mA@24V with a holding force of 340kg. In the event of an unauthorised attempt to open the door, the ECO5700M “EcoMag” “wakes up” and goes into an Alarm Mode with full current of 300mA@24V applied to the device, instantly increasing the holding force to up to 680kg.
The EcoMag operates on multi voltage 10-26VDC, provides an Early Warning (EW) signal output, has a built-in local Alarm Buzzer, with full monitoring of Lock Status and Door Status, long distance Light Panel indicator and an Exit Switch Delay function.
This device is provided with the FSH patented Anti-Tamper-Plate as standard.
PRODUCT ECO5700MPOWER SAVING ELECTRO MAGNETIC LOCKING DEVICE EcoMag™
9
NEW GENERATION ELECTRIC AND ELECTRONIC LOCKING
PRODUCT DIMENSIONS AND INSTALLATION
One way security dome nut
Anti-Tamper Plate
10
TECHNICAL DETAILS
PRODUCT FEATURES
ECO3500M
• Truly Green product
• Door and Lock Status Monitoring Sensor (DSS & LSS)
• Early Warning signal output and local alarm buzzer (EW)
• Multi Voltage 10-26VDC low power consumption (60mA@24VDC Sleep-Mode)
• Exit Switch Delay Function
• Long distance Light Panel (LP)
• Anti-Tamper-Plate
PRODUCT DESCRIPTION
The patented ECO3500M model is a power saving Electro-Magnetic Lock. Under normal, non-alarm conditions, the ECO3500M “EcoMag” operates in a low current `Sleeping Mode’ of 60mA@24V with a holding force of 100kg. In the event of an unauthorised attempt to open the door, the ECO3500M “EcoMag” “wakes up” and goes into an Alarm Mode with full current of 300mA@24V applied to the device, instantly increasing the holding force to up to 280kg.
The EcoMag operates on multi Voltage 10-26VDC, provides an Early Warning (EW) signal output, has a built-in local Alarm Buzzer, with full monitoring of Lock Status and Door Status, long distance Light Panel indicator and an Exit Switch Delay function.
The device comes with the FSH patented Anti-Tamper-Plate as standard.
PRODUCT ECO3500M POWER SAVING ELECTRO MAGNETIC LOCKING DEVICE EcoMag™
PART NO. ECO3500M
FUNCTION Power To Lock (Fail Safe)
HOLDING STRENGTH Up to 280 kg in ‘Alarm-Mode’100kg in ‘Sleep-Mode’
VOLTAGE/CURRENTMulti Voltage 10-26VC
Sleep-Mode: 12VDC=120mA / 24VDC=60mAAlarm-Mode: 12VDC=600mA / 24VDC=300mA
MONITORING
Door Status Monitoring Sensor (DSS)Lock Status Monitoring Sensor (LSS)
Early Warning Signial Output and Local Alarm Buzzer (EW)Exit Switch Delay Function
Long Distance Light Panel (LP)
SIZE Magnet: L=238 W=48 D=24mmArmature Plate: L=185 W=38 D=12mm
11
NEW GENERATION ELECTRIC AND ELECTRONIC LOCKING
PRODUCT DIMENSIONS AND INSTALLATION
One way security dome nut
Anti-Tamper Plate
12
TECHNICAL DETAILS
PRODUCT FEATURES
PRODUCT VE1260HIGH SECURITY MOTORISED DROP BOLT WITH PRE-LOAD CAPABILITY EcoLock™
PRODUCT FEATURES
TECHNICAL DETAILS
• Releases with up to 35kg of Pre-Load/Side Load
• Motorised locking device
• Durability tested to 400,000 cycles
• Multi voltage from 12 to 30VDC
• Sleep-Mode Current less than 15mA@12VDC
• Fully monitored including Reed Switch for door position
• Up to 1000kg Holding Strength
• 5 year warranty
• Retrofit version for Trimec/PADDE ES8000 (VE1260S Square Edge Version)
VE1260
PART NO. VE1260
FUNCTION Mortice Mount, power-to-lock/power-to-release field interchangeable, up to 35kg of Pre-Load capability, unlocking and up to 6.5kg locking
HOLDING STRENGTH Up to 1000kg
VOLTAGE/CURRENT
Multi Voltage 12-30VDCActive Mode: Locking/Unlocking cycle current is 0.29A to 0.85A depending on the side load.
More side load = more current. See preload vs. current graph. Sleep-Mode: After locking/unlocking the current drops down to ~0.015A (15mA)
APPROVALS
CEC-Tick
Fire rated in accordance with AS1905.1.2005 Part 1 to up to 4 hours on fire door assemblies
MONITORINGLock Status Sensor of the internal locking mechanism
Door Status Sensor Built-in Reed Switch, monitoring the door position
ENVIRONMENTAL Operational Temperature Range -20 to +60C
DURABILITYExceeding Australian Standard AS4145.2-2008
400,000 operating cycles • Durability D7
STRENGTH Meeting Australian Standard AS4145.2-2008
• Static Strength S8• Impact Strength S8
MAXIMUM DOOR GAP 8mm
DOOR MISALIGNMENT Standard Strike Plate + 4mm Special Strike Plate up to + 12mm--
PRODUCT DESCRIPTION
The patented EcoLock VE1260 is a high torque motor driven Drop Bolt with up to 35kg pre-load/side load tolerance. It can be installed vertically in the door frame (lock style) or horizontally in the frame header and has a symmetric dead-bolt mechanism to allow to be used on 180 degree swing through doors.
The VE1260 is considered a “Green Product” as it consumes an inrush current of 290mA @ 12VDC only during locking and unlocking action (Active Mode), then in the locked or unlocked state (Sleep-Mode), the Drop Bolt consumes current less than15mA @ 12VDC.
A series of additional Strike Plates allow for door misalignment of up to +12mm and a retrofit version of the FSH Eco Lock is available to suit the PADDE/TRIMEC ES8000 drop bolt footprint.
An optional LED red/green indicator unit is available.
-
13
NEW GENERATION ELECTRIC AND ELECTRONIC LOCKING
PRODUCT DIMENSIONS AND INSTALLATIONDescriptionIssue
D
E
F
C
321
B
A
321 5
C
D
4 876
A
B
E
F
7654
EN Ref. DateINT.
A3
UNLESS OTHERWISE NOTED
WRITTEN AUTHORISATION
PROPERTY OFSEE EN FOR NO REPRODUCTION IN PART
AUTHORIZATION
DRAWN TO AS1100
ALL DIMENSIONS IN MILLIMETERS
DO NOT SCALE DRAWING
MATERIAL:
FINISH:
HEAT TREATMENT:
TITLE
DRAWN: SCALE: DATE:
DRAWING NO.:
SIZE:
OR WHOLE IS PERMITTED WITHOUT DRAWING
SHEET
UNIT 9, 30 PERRY STREETMIN MATRAVILLE, NSW 2036, AUSTRALIA
PROJECTION
SURFACE FINISH
FIRE & SECURITY HARDWARE P/L
8
1 OF 11:3
TOLERANCES ARE
3.2
0 DECIMAL 0.251 DECIMAL 0.102 DECIMAL 0.05ANGLES 0.5
CHKD
STRIKE PLATE
FACEPLATE
MOUNTING
DOOR
DOOR JAMB
BRACKETSMAXIMUMDOOR GAP
8.0mmMAX.
VE1260R Round Edge
DescriptionIssue
D
E
F
C
321
B
A
321 5
C
D
4 876
A
B
E
F
7654
EN Ref. DateINT.
A3
UNLESS OTHERWISE NOTED
WRITTEN AUTHORISATION
PROPERTY OFSEE EN FOR NO REPRODUCTION IN PART
AUTHORIZATION
DRAWN TO AS1100
ALL DIMENSIONS IN MILLIMETERS
DO NOT SCALE DRAWING
MATERIAL:
FINISH:
HEAT TREATMENT:
TITLE
DRAWN: SCALE: DATE:
DRAWING NO.:
SIZE:
OR WHOLE IS PERMITTED WITHOUT DRAWING
SHEET
UNIT 9, 30 PERRY STREETMIN MATRAVILLE, NSW 2036, AUSTRALIA
PROJECTION
SURFACE FINISH
FIRE & SECURITY HARDWARE P/L
8
1 OF 11:3
TOLERANCES ARE
3.2
0 DECIMAL 0.251 DECIMAL 0.102 DECIMAL 0.05ANGLES 0.5
CHKD
BRACKETS
STRIKE PLATE
MOUNTING
FACEPLATE
DOOR
DOOR JAMBMAXIMUMDOOR GAP
8.0mmMAX.
VE1260S Square Edge
25.0
25.0 30.5
210.0
25.0
30.5
185.0
DOOR JAMB
LINE 2
Description DKHCeussI
EA
D
E
F
C
321
B
A
321 5
C
D
4 876
A
B
E
F
54
EN Ref. DateINT.
FDB80MP - VE LOCK
DRAWING
MATRAVILLE, NSW 2036, AUSTRALIA
7
WRITTEN AUTHORISATION
PROJECTION
SEE EN FOR NO REPRODUCTION IN PART
AUTHORIZATION
DRAWN TO AS1100
ALL DIMENSIONS IN MILLIMETERS
DO NOT SCALE DRAWING
MATERIAL:
FINISH:
HEAT TREATMENT:
TITLE
DRAWN: SCALE: DATE:
8
PROPERTY OF
DRAWING NO.:
SIZE:
3.2
OR WHOLE IS PERMITTED WITHOUT
UNLESS OTHERWISE NOTED
MIN
FIRE & SECURITY HARDWARE P/L
6
SURFACE FINISH
A31 OF 1
1:2
TOLERANCES ARE
SHEET
UNIT 9, 30 PERRY STREET
0 DECIMAL 0.251 DECIMAL 0.102 DECIMAL 0.05ANGLES 0.5
18/10/2012
LOCKFACEPLATE
41.5
25.0
22.5
210.0
R12.5
31.6
163.0
185.0
Locking Device VE1260R Round Edge
30.0
18.0
18.0
256.0
DOOR JAMB
LINE 2 LOCKFACEPLATE
22.5
49.5
163.0 256.0
30.0
41.5
EA
D
E
F
C
321
B
A
321 5
C
D
4 876
A
B
E
F
87654
CHKDIssue Description EN Ref.
WRITTEN AUTHORISATION
PROJECTION
OR WHOLE IS PERMITTED WITHOUT NO REPRODUCTION IN PART
AUTHORIZATION
DRAWN TO AS1100
ALL DIMENSIONS IN MILLIMETERS
DO NOT SCALE DRAWING
MATERIAL:
FINISH:
HEAT TREATMENT:
TITLE
DRAWN: SCALE: DATE:
DRAWING NO.:
SIZE:
SHEET
DRAWING
MATRAVILLE, NSW 2036, AUSTRALIAUNIT 9, 30 PERRY STREET
TOLERANCES ARE
A3
UNLESS OTHERWISE NOTEDSEE EN FOR
1 OF 1
FIRE & SECURITY HARDWARE P/LPROPERTY OF
1:2
DateINT.
3.2
FDB80MP - VE LOCKMINSURFACE FINISH
0 DECIMAL 0.251 DECIMAL 0.102 DECIMAL 0.05ANGLES 0.5
18/10/2012
Locking Device VE1260S Square Edge
22.5
DateEN Ref.Description
1 OF 1
D
E
F
C
321
B
A
321 5
C
D
4 876
A
B
E
F
54
INT.
A3
1:3
3.2
DRAWING
MATRAVILLE, NSW 2036, AUSTRALIA
7
WRITTEN AUTHORISATION
PROJECTION
SEE EN FOR NO REPRODUCTION IN PART
AUTHORIZATION
DRAWN TO AS1100
ALL DIMENSIONS IN MILLIMETERS
DO NOT SCALE DRAWING
MATERIAL:
FINISH:
HEAT TREATMENT:
TITLE
DRAWN: SCALE: DATE:
8
PROPERTY OF
DRAWING NO.:
SIZE:
OR WHOLE IS PERMITTED WITHOUT
UNLESS OTHERWISE NOTEDTOLERANCES ARE FIRE & SECURITY HARDWARE P/L
6
UNIT 9, 30 PERRY STREET
Issue
MIN
SHEET
SURFACE FINISH
0 DECIMAL 0.251 DECIMAL 0.102 DECIMAL 0.05ANGLES 0.5
CHKD
Ø22.0 x 20 DEEPLINE 3
DOOR
LINE 1(HALF THICKNESS OF DOOR)
185.0
28.0
103.5 STRIKE PLATE3mm THICK
27.0
R12.5 R12.5
210.0
Strike Plate VE1260R Round Edge
53.0
7.0
1:31 OF 1A3
INT. DateEN Ref.DescriptionIssue
D
E
F
C
321
B
A
321 5
C
D
4 876
A
B
3.2MINSURFACE FINISH
87
F
OR WHOLE IS PERMITTED WITHOUT DRAWING
MATRAVILLE, NSW 2036, AUSTRALIA
UNLESS OTHERWISE NOTED
WRITTEN AUTHORISATION
PROJECTION
SEE EN FOR NO REPRODUCTION IN PART
AUTHORIZATION
DRAWN TO AS1100
ALL DIMENSIONS IN MILLIMETERS
DO NOT SCALE DRAWING
MATERIAL:
FINISH:
HEAT TREATMENT:
54
TITLE
DRAWN:
SIZE:
6
PROPERTY OF
DRAWING NO.:
FIRE & SECURITY HARDWARE P/L
E
DATE:
TOLERANCES ARE
UNIT 9, 30 PERRY STREET
SCALE:
SHEET
0 DECIMAL 0.251 DECIMAL 0.102 DECIMAL 0.05ANGLES 0.5
CHKD
STRIKE PLATE3mm THICK
27.0
256.0
Ø22.0 x 20 DEEP
DOOR
LINE 3
LINE 1(HALF THICKNESS OF DOOR)
28.0
242.0
132.0
Strike Plate VE1260S Square Edge
14
31.4
31.
4
185
EA
D
E
F
C
321
B
A
321 5
C
D
4 876
A
B
E
F
87654
CHKDIssue Description EN Ref.
WRITTEN AUTHORISATION
PROJECTION
OR WHOLE IS PERMITTED WITHOUT NO REPRODUCTION IN PART
AUTHORIZATION
DRAWN TO AS1100
ALL DIMENSIONS IN MILLIMETERS
DO NOT SCALE DRAWING
MATERIAL:
FINISH:
HEAT TREATMENT:
TITLE
DRAWN: SCALE: DATE:
DRAWING NO.:
SIZE:
SHEET
DRAWING
MATRAVILLE, NSW 2036, AUSTRALIAUNIT 9, 30 PERRY STREET
TOLERANCES ARE
LINISH AS PER INSTRUCTIONS
UNLESS OTHERWISE NOTEDSEE EN FOR
Assembly
FIRE & SECURITY HARDWARE P/LPROPERTY OF
0.5
DateINT.
HS0002SEE BOM TABLE
A3
SURFACE FINISH MIN3.2
1:11 OF 1
0 DECIMAL 0.251 DECIMAL 0.102 DECIMAL 0.05ANGLES
VE Lock Glass Door Mount -Housing Weld 30/10/2012
180
228.2
47.
5
20.
8
PRODUCT DIMENSIONS AND INSTALLATION
Glass Door Box VE1260R-GL
1 OF 11:1
31mm VE Lock Strike Plate
PL0017-1
D
E
F
C
321
B
A
321 5
C
D
4 876
A
B
E
F
54
EN Ref. DateINT.
3mm THICK 304 SS SHEET N4 FINISH
DRAWING
MATRAVILLE, NSW 2036, AUSTRALIA
7
WRITTEN AUTHORISATION
PROJECTION
SEE EN FOR NO REPRODUCTION IN PART
AUTHORIZATION
DRAWN TO AS1100
ALL DIMENSIONS IN MILLIMETERS
DO NOT SCALE DRAWING
MATERIAL:
FINISH:
HEAT TREATMENT:
TITLE
DRAWN: SCALE: DATE:
8
PROPERTY OF
DRAWING NO.:
SIZE:
3.2
OR WHOLE IS PERMITTED WITHOUT
UNLESS OTHERWISE NOTED
EA
FIRE & SECURITY HARDWARE P/L
6
MIN
CHKD
A3
SURFACE FINISH
DescriptionIssue
SHEET
UNIT 9, 30 PERRY STREET
TOLERANCES ARE0 DECIMAL 0.251 DECIMAL 0.102 DECIMAL 0.05ANGLES 0.5
11/6/2013
Y1 RELEASED FOR PROTOTYPING 11/6/13
6.0
242.0
23.6
12.011.0x90
256.0
110.0
76.0
31.0
35.0
MAGNET 3.0
MAGNETS
11.0x90
27.6
76.0 12.0
35.0
110.0
242.0
256.0
35.0 6.0
CHKD
35mm VE LOCK STRIKE PLATE
D
E
F
C
321
B
A
321 5
C
D
4 876
A
B
E
F
7654
Issue Description EN Ref. Date
UNLESS OTHERWISE NOTED
WRITTEN AUTHORISATION
PROPERTY OFSEE EN FOR NO REPRODUCTION IN PART
AUTHORIZATION
DRAWN TO AS1100
ALL DIMENSIONS IN MILLIMETERS
DO NOT SCALE DRAWING
MATERIAL:
FINISH:
HEAT TREATMENT:
TITLE
DRAWN: SCALE: DATE:
DRAWING NO.:
SIZE:
OR WHOLE IS PERMITTED WITHOUT DRAWING
SHEET
UNIT 9, 30 PERRY STREET
A3
MATRAVILLE, NSW 2036, AUSTRALIA
PROJECTION
1 OF 1
FIRE & SECURITY HARDWARE P/L
8
1:1
INT.
3mm THICK 304 SS SHEET N4 FINISH
3.2
PL0018-1
EA
TOLERANCES ARE
SURFACE FINISH MIN
0 DECIMAL 0.251 DECIMAL 0.102 DECIMAL 0.05ANGLES 0.5
11/6/2013
Y1 RELEASED FOR PROTOTYPING 22/1/13
3.0
MAGNETS
11.0x90
40.0
256.0
242.0
110.0
76.0
32.6
35.0
12.0
6.0
3.0
DateEN Ref.Description DKHCeussI
EA
D
E
F
C
321
B
A
321 5
C
D
4 876
A
B
E
F
INT.
3mm THICK 304 SS SHEET N4 FINISH40mm VE LOCK STRIKE PLATE
PL0019-1
PROPERTY OF
OR WHOLE IS PERMITTED WITHOUT
5
MATRAVILLE, NSW 2036, AUSTRALIA
UNLESS OTHERWISE NOTED
WRITTEN AUTHORISATION
PROJECTION
SEE EN FOR NO REPRODUCTION IN PART
AUTHORIZATION
DRAWN TO AS1100
ALL DIMENSIONS IN MILLIMETERS
DO NOT SCALE DRAWING
MATERIAL:
FINISH:
HEAT TREATMENT:
TITLE
DRAWN:
76
SCALE: DATE:
3.2
8
DRAWING
MIN
FIRE & SECURITY HARDWARE P/L
4
SURFACE FINISH
A31 OF 1
1:1
TOLERANCES ARE
DRAWING NO.:
SIZE:
SHEET
UNIT 9, 30 PERRY STREET
0 DECIMAL 0.251 DECIMAL 0.102 DECIMAL 0.05ANGLES 0.5
11/6/2013
Y1 RELEASED FOR PROTOTYPING 11/6/13
Accessory Strike Plate VE1260S-ST6
Accessory Strike Plate VE1260S-ST9
Accessory Strike Plate VE1260S-ST12
15
NEW GENERATION ELECTRIC AND ELECTRONIC LOCKING
0
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1
0 1 2 3 4 5 6 7 8
Curr
ent
Am
ps
Preload Kg
VE1260 Maximum Current vs. Preload
12 Volt
24 Volt
CURRENT VS. PRELOAD GRAPH
ORDER DETAILS
PART NO. PRODUCT DESCRIPTION
ECOLOCK VE1260 SERIES
VE1260REcoLock Pre-Load Drop Bolt 25mm Face Plate
including 27mm Strike Plate ROUND EDGE to cater for +4mm door misalignment
VE1260S
EcoLock Pre-Load Drop Bolt 30mm Face Plate
including 27mm Strike Plate SQUARE EDGE to cater for +4mm door misalignment
(PADDE ES8000 Replacement)
ACCESSORIES VE1260 SERIES
VE1260R-GL Glass Door Box for VE1260R Lock or VE1260R-ST4 Strike Plate ROUND EDGE
VE1260LED-BOX LED Monitor Box for Lock-Status Monitoring Indication (Red/Green)
VE1260R-SCEC Security Bracket for VE1260R
VE1260S-ST6Strike Plate 31mm for VE1260 Series to cater for +6mm door misalignment minimum
Door Thickness 35mm SQUARE EDGE
VE1260S-ST9Strike Plate 35mm for VE1260 Series to cater for +9mm door misalignment minimum
Door Thickness 40mm SQUARE EDGE
VE1260S-ST12Strike Plate 40mm for VE1260 Series to cater for +12mm door misalignment minimum
Door Thickness 50mm SQUARE EDGE
-
-
-
-
-
16
TECHNICAL DETAILS
PRODUCT FEATURES
PART NO. MEM2400LP
LIGHT FEATURE Light Panel (LP)
FUNCTION Surface mountOutward opening doors
HOLDING STRENGTH Up to 1000kg
VOLTAGE/CURRENT Dual Voltage 12/24VDC 12VDC/240mA 24VDC/120mA
APPROVALS 4 hour fire rated to A.S. and B.S. standards
MONITORING EW / LSS / DSS
SIZEMEM size L= 158mm H= 35mm D= 30mmArmature Plate size L= 120mm H= 30.6mm D= 12.5mmAnti-Tamper-Bracket size L= 194mm H= 38mm D= 30mm
• Slimline design 75% smaller than a standard 600kg magnet
• High holding force up to 1000kg and releases under side load of up to 70kg
• Dual-Voltage 12/24VDC Low power consumption 24VDC/120mA
• 5 year warranty
• Simple installation
• 4 hour fire rated
• Full monitoring Lock Status Sensor (LSS) and Door Status Sensor (DSS)
• Early Warning Alarm (EW)
• Anti Tamper Bracket (to protect the armature plates fixing bolt)
MEM2400LP
PRODUCT DESCRIPTION
The innovative slimline MEM2400LP Mechanical Electro Magnetic Lock has been designed as an alternative to standard magnetic locks especially suited for situations where door height or narrow profile door frames create installation restrictions and appearance is of paramount importance.
The patented MEM incorporates both magnetic and mechanical design principles to achieve a superior holding force of up to 1000kg, whilst being 75% smaller than a standard 600kg Electro Magnet.
The MEM2400 is capable of opening with up to 70kg side pressure on the door and has the added security function of “Early Warning” alarm condition. The device comes with the FSH patented “Anti-Tamper-Bracket” as standard.
PRODUCT MEM2400LPMEM MECHANICAL ELECTRO MAGNETIC LOCKING DEVICE FOR OUTWARD OPENING HINGED DOORS
17
NEW GENERATION ELECTRIC AND ELECTRONIC LOCKING
PRODUCT DIMENSIONS AND INSTALLATION
Installation diagram
12 VOLT JUMPER POSITION
24 VOLT JUMPER POSITION
SPAREJUMPER
(D)
(B)
(C)
Door
Door Frame
Magnet
(D)
(B)&(C)
Installation dimension
35.0
120.0164.0194.0
12.5
18.5
Armature Plate & Anti-Tamper
30.5
30.0
5.5
158.0
120.0
38.0
PART NO. AMGB24-12
Installation diagram
12 VOLT JUMPER POSITION
24 VOLT JUMPER POSITION
SPAREJUMPER
(D)
(B)
(C)
Door
Door Frame
Magnet
(D)
(B)&(C)
Installation dimension
35.0
120.0164.0194.0
12.5
18.5
Armature Plate & Anti-Tamper
30.5
30.0
5.5
158.0
120.0
38.0
PART NO. AMGB24-12
ACCESSORIES
AMGB24-12 Glass Door Bracket U-ProfileMEM2400L Adjustable L-Bracket for Narrow Header Frames
Thickness of material = 1.5m/m Minimum Door Gap 3mm
PART NO. AMGB24-12PART NO. MEM2400L
18
TECHNICAL DETAILS
PRODUCT FEATURES
• Slimline design 75% smaller than a standard 600kg magnet
• High holding force up to 1000kg and releases under side load of up to 70kg
• Dual-Voltage 12/24VDC Low power consumption 24VDC/175mA
• 5 year warranty
• Simple installation
• 4 hour fire rated
• Full monitoring Lock Status Sensor (LSS) and Door Status Sensor (DSS)
• Early Warning Alarm (EW)
• Anti Tamper Bracket (to protect the armature plates fixing bolt)
MEM2400LED-LZ
PRODUCT DESCRIPTION
The innovative slimline MEM2400LED-LZ Mechanical Electro Magnetic Lock for inward opening doors has been designed as an alternative to standard magnetic locks. The MEM2400LED-LZ comes as a combination with L&Z-Brackets.
The patented MEM2400LED-LZ incorporates both magnetic and mechanical design principles to achieve a superior holding force of up to 1000kg. The MEM2400LED-LZ is capable of opening with up to 70kg side pressure on the door.
PRODUCT MEM2400LED-LZ MEM MECHANICAL ELECTRO MAGNETIC LOCKING DEVICE FOR INWARD OPENING HINGED DOORS
PART NO. MEM2400LED-LZ
LIGHT FEATURE LED
FUNCTION Surface mountInward opening doors including L&Z Bracket
HOLDING STRENGTH Up to 1000kg
VOLTAGE/CURRENT Dual Voltage 12/24VDC 12VDC/350mA 24VDC/175mA
APPROVALS 4 hour fire rated to A.S. and B.S. standards
MONITORING EW / LSS / DSS
SIZE MEM size L= 218mm H= 36mm D= 30mmArmature Plate size L= 174mm H= 30.5mm D= 12.5mm
19
NEW GENERATION ELECTRIC AND ELECTRONIC LOCKING
PRODUCT DIMENSIONS AND INSTALLATION
Installation dimension Bearing sleeve nut 5.5
30.5
218.0
30.0
30.5
Armature plate
174.0
50.0
5.0
(D)
dome-nut
(C)
Magnet
Door
Door Frame
(B)
12 VOLT JUMPER POSITION24 VOLT JUMPER POSITION
SPAREJUMPER
(C)
(B)
(A) (D)
Installation dimension Bearing sleeve nut 5.5
30.5
218.0
30.0
30.5
Armature plate
174.0
50.0
5.0
(D)
dome-nut
(C)
Magnet
Door
Door Frame
(B)
12 VOLT JUMPER POSITION24 VOLT JUMPER POSITION
SPAREJUMPER
(C)
(B)
(A) (D)