Embed Size (px)
Citation preview
Fuels Ventilation and CombustionFuels Ventilation and Combustion
Alan White
Title Fuels, Ventilation and CombustionTitle Fuels, Ventilation and Combustion
The unit has been developed to allow the learner to gain underpinning technology integrated with practical assignment work
Extensive use of installed appliances and visual aids to demonstrate principles and reinforce technology is recommended
The unit is designed to provide the learner with an appreciation of fuels, their requirements to allow complete combustion
Title Fuels, Ventilation and CombustionTitle Fuels, Ventilation and Combustion The effects of incomplete combustion on the flue
gas constituents; this could be demonstrated using a flue gas analyser. The effect of the products of incomplete combustion on people should be emphasised. The dangers of storing or using LPG below ground level should be emphasised.
Should use application of the knowledge gained the workplace to emphasise the necessity for correct flues and ventilation for all fuel burning appliances.
Title Fuels, Ventilation and CombustionTitle Fuels, Ventilation and Combustion
Syllabus Document
F.V.C 1.1 Outline the main constituents of natural and
liquefied petroleum gas (LPG) and the conditions necessary for complete combustion
F.V.C.1.2 Outline the requirements for flues and ventilation
for gas, solid fuel, and oil burning appliances.
Title Fuels, Ventilation and CombustionTitle Fuels, Ventilation and Combustion
F.V.C. 1.3 Outline the procedures of flue pull and spillage
testing on open flue, gas, solid fuel and oil burning appliances
F.V.C 1.4 Outline the fuel types for oil and solid fuel
burning appliances
Title Fuels, Ventilation and CombustionTitle Fuels, Ventilation and Combustion
F.V.C 1.5 Qualifications and Supervision
F.V.C 1.6 Outline the requirements for the installation of a
gas appliance
Title Fuels, Ventilation and CombustionTitle Fuels, Ventilation and Combustion
F.V.C. 1.7 Outline the procedures and perform gas
tightness testing on a domestic installation
F.V.C 1.8 Identify a selection of gas controls and correctly
describes their functions for the safe operation of the gas appliance
Title Fuels, Ventilation and CombustionTitle Fuels, Ventilation and Combustion
F.V.C.1.9 Demonstrate the correct method of conducting
pressure readings from a meter to a gas appliance
F.V.C. 1.10 Demonstrate the correct use of a flue gas
analyser and interpret results from flue sampling
Title Fuels, Ventilation and CombustionTitle Fuels, Ventilation and Combustion
F.V.C 1.11 Identify industry unsafe situations and document
appropriate procedures and documentation
F.V.C. 1.12 Commission a gas appliance using appropriate
tools and test equipment 1.7 -1.12 can be integrated as an assessment
Title Fuels, Ventilation and CombustionTitle Fuels, Ventilation and Combustion
Assessment
A holistic approach has been adopted for all the formative assessments in the delivery of the practical and underpinning knowledge parts as detailed in the syllabus document. Learners can work in pairs for the practical activities but will require to complete a final practical test individually
Title Fuels, Ventilation and CombustionTitle Fuels, Ventilation and Combustion
There will be underpinning knowledge objective tests to confirm knowledge transfer of subject areas and learner feedback to learners to confirms area for improvement / areas of strength
There are a variety of practical, investigative
tasks, other assignments and objective tests that can be developed by the centre to compliment the syllabus content
Title Fuels, Ventilation and CombustionTitle Fuels, Ventilation and Combustion
F.V.C. 1.1 (same as old unit 8) Outline the main constituents of natural and
liquefied petroleum gas (LPG) and the conditions necessary for complete combustion
Objective test
F.V.C.1.2 (slight changes/additions) Outline the requirements for flues and ventilation
for gas, solid fuel, and oil burning appliances. Assignment
Title Fuels, Ventilation and CombustionTitle Fuels, Ventilation and Combustion
F.V.C. 1.3 (same as old unit 8) Outline the procedures for flue pull and spillage
testing on an open flue appliance
Assignment/ Practical Test
Title Fuels, Ventilation and CombustionTitle Fuels, Ventilation and Combustion
F.V.C 1.4 (new) Outline the fuel types for oil and solid fuel
burning appliances
This section is to give the learner an appreciation of fuel specifications for oil and solid fuel and will be integrated into assignment 1.2
Title Fuels, Ventilation and CombustionTitle Fuels, Ventilation and Combustion
F.V.C 1.5 (same as old unit 8) Qualifications and Supervision
Restricted Response
F.V.C 1.6 (same as old unit 8) Outline the requirements for the safe installation
of gas appliances
Structured question
Title Fuels, Ventilation and CombustionTitle Fuels, Ventilation and Combustion
F.V.C.1.7 (same as old unit 8) Demonstrate the correct procedures for
tightness testing on a domestic installation (air and gas)
Assignment/Practical Task New tightness testing procedures
Title Fuels, Ventilation and CombustionTitle Fuels, Ventilation and Combustion
F.V.C 1.8 (changes from old unit 8) Identify a selection of gas controls and correctly
describe their functions for the safe operation of a gas appliance
Assignment/Practical Task
Title Fuels, Ventilation and CombustionTitle Fuels, Ventilation and Combustion
F.V.C. 1.9 (new) Demonstrate the correct procedures for
checking operating pressures at meter, the burner operating pressure (inlet and /or outlet) gas rates, heat inputs for the safe operation of a gas appliance
Assignment / Practical Task
Title Fuels, Ventilation and CombustionTitle Fuels, Ventilation and Combustion
F.V.C. 1.10 (new) Demonstrate the correct use of a flue gas
analyser and interpret results from flue sampling
Assignment / Practical Task
Title Fuels, Ventilation and CombustionTitle Fuels, Ventilation and Combustion
F.V.C. 1.11 (new) Identify industry unsafe situation and document
appropriate procedures and documentation
Assignment
Title Fuels, Ventilation and CombustionTitle Fuels, Ventilation and Combustion
F.V.C. 1.12 (same as old unit 8) Outline the procedures for carrying out a
commission a gas appliance
Practical exercise
Title Fuels, Ventilation and CombustionTitle Fuels, Ventilation and Combustion Changes
F.V.C 1.2 (Assignment) As before but changes in the assignment part/s Select a suitable flue system (this can be
supported by a labelled sketch) Specify materials, design construction and
termination of the flue system Calculate the size of ventilators required
Title Fuels, Ventilation and CombustionTitle Fuels, Ventilation and Combustion
Select an approved fuel for the boiler Select a carbon monoxide detector for the
installation and give reasons for your answer Specify an alternative flue arrangement for the
installation Measure the ventilator/s for the boiler and
decide if it is acceptable (assessor to supply) This is much the same as the previous unit but
with some additions with the inclusion of solid fuel and oil
Title Fuels, Ventilation and CombustionTitle Fuels, Ventilation and Combustion
F.V.C. 1.4 (included in assignment 1.2) This can be integrated into F.V.C. 1.2 to give an
appreciation of fuels for solid fuel and oil
F.V.C.1.8 (controls and their functions) Control identification and their functions, mainly
fsd’s, asd’s, gas valves, regulators, where the learner has to identify and check five from eight.
No faults on any controls
Title Fuels, Ventilation and CombustionTitle Fuels, Ventilation and CombustionF.V.C.1.9
Title Fuels, Ventilation and CombustionTitle Fuels, Ventilation and CombustionF.V.C.1.9
Title Fuels, Ventilation and CombustionTitle Fuels, Ventilation and Combustion
F.V.C.1.10 Flue Gas Analysis
Title Fuels, Ventilation and CombustionTitle Fuels, Ventilation and CombustionF.V.C.1.11 Unsafe Situations
Title Fuels, Ventilation and CombustionTitle Fuels, Ventilation and CombustionExample integrated Assessments
Title Fuels, Ventilation and CombustionTitle Fuels, Ventilation and CombustionExample integrated Assessments
Title Fuels, Ventilation and CombustionTitle Fuels, Ventilation and CombustionExample integrated assessments
Title Fuels, Ventilation and CombustionTitle Fuels, Ventilation and Combustion
Title Fuels, Ventilation and CombustionTitle Fuels, Ventilation and CombustionExample integrated assessments
Title Fuels, Ventilation and CombustionTitle Fuels, Ventilation and Combustion
Title Fuels, Ventilation and CombustionTitle Fuels, Ventilation and Combustion
