Grade-D Breathing Air Filtration HP-1A Replacement carbon monoxide test tube - box of 10 HP-2A Replacement carbon dioxide test tube - box of 10 HP-6A Replacement water vapor test tube - box of 10 HP-109AD Replacement oil mist test tube - box of 10 Air Flow Plugs directly into outlet fitting on Breather Box ® or high pressure regulator. LP-A4 Attaches Here 100 psi Maximum Pressure High Pressure Cylinder Air Test Module Low Pressure Compressor Air Quality Test Module Compressor Air Quality Test Module LP-A4 Air Quality Test Kit Complete Test Kits Test Modules LP-47PF Total particulate test module, maximum 20 psi - use with HP-A4 or HP-A445 - order pre-weighted filter (MW-47) separately MW-47 Pre-weighed 47mm filter in petri dish HP-A4 Cylinder air test module, 3000 psi maximum - use with test module LP-A4 HP-A445 Cylinder air test module, 5000 psi maximum - use with test module LP-A4 LP-A4 Compressor air quality test module - 100 psi max MWH-44 47mm filter holder only Replacement Tubes for Kits and Modules Item No. Description Item No. Description Item No. Description LP/HP-A4K Contains LP-A4, HP-A4, LP-47PF, 4 boxes of assorted test tubes, and padded carry case – 3000 psi maximum LP/HPA445K Same as above kit, includes HP-A445 test module in place of HP-A4 module – 5000 psi maximum Cylinder Air Test Module CGA-346 (3000 psi) HP-A4 Cylinder Air Test Module CGA-347 (5000 psi) HP-A445 Air Flow Please specify fitting. 25 Contact us at (800) 866-8100 or [email protected] Air Quality Test Kit LP/HPA445K 47 mm Filter Pre-weighted MW-47 Total Particulate Test Module LP-47PF Air Systems’ breathing air quality test kits are designed to test the air produced by low pressure compressors (use model LP-A4) and compressed high pressure air in cylinders (use models HP-A4 or HP-A445). The tests are accomplished through the use of low cost detector tubes that provide a “go/no go” test of the air quality. If a high reading is found, this signals the user that they have a potentially unacceptable quality of breathing air. If this occurs, a laboratory analysis of the air components must be made to determine the exact readings of the air quality and take corrective action.

Grade-D Breathing Air Filtration Air Quality Test Kit Catalog - Page 25.pdfCylinder Air Test Module CGA-347 (5000 psi) HP-A445 Air Flow Please specify fitting. 25 Contact us at (800)

Download PDF Report

Upload
others
View
2
Download
0

Embed Size (px)

Citation preview

Grade-D Breathing Air Filtration

HP-1A Replacement carbon monoxide test tube - box of 10HP-2A Replacement carbon dioxide test tube - box of 10HP-6A Replacement water vapor test tube - box of 10HP-109AD Replacement oil mist test tube - box of 10

Air Flow

Plugs directly into outlet fitting on

Breather Box® or high pressure

regulator.

LP-A4 Attaches

Here

100 psi Maximum Pressure

High Pressure Cylinder Air Test Module

Low Pressure CompressorAir Quality Test Module

Compressor Air Quality Test Module

LP-A4

Air Quality Test Kit

Complete Test Kits

Test Modules

LP-47PF Total particulate test module, maximum 20 psi - use with HP-A4 or HP-A445 - order pre-weighted filter (MW-47) separately MW-47 Pre-weighed 47mm filter in petri dish HP-A4 Cylinder air test module, 3000 psi maximum - use with test module LP-A4 HP-A445 Cylinder air test module, 5000 psi maximum - use with test module LP-A4LP-A4 Compressor air quality test module - 100 psi maxMWH-44 47mm filter holder only

Replacement Tubes for Kits and Modules

Item No. Description

LP/HP-A4K Contains LP-A4, HP-A4, LP-47PF, 4 boxes of assorted test tubes, and padded carry case – 3000 psi maximumLP/HPA445K Same as above kit, includes HP-A445 test module in place of HP-A4 module – 5000 psi maximum

Cylinder Air Test ModuleCGA-346 (3000 psi)

HP-A4

Cylinder Air Test ModuleCGA-347 (5000 psi)

HP-A445

Air Flow

Please specify fitting.

25 Contact us at (800) 866-8100 or [email protected]

Air Quality Test KitLP/HPA445K

47 mm Filter Pre-weightedMW-47

Total Particulate Test ModuleLP-47PF

Air Systems’ breathing air quality test kits are designed to test the air produced by low pressure compressors (use model LP-A4) and compressed high pressure air in cylinders (use models HP-A4 or HP-A445). The tests are accomplished through the use of low cost detector tubes that provide a “go/no go” test of the air quality. If a high reading is found, this signals the user that they have a potentially unacceptable quality of breathing air. If this occurs, a laboratory analysis of the air components must be made to determine the exact readings of the air quality and take corrective action.