Grade-D Breathing Air Filtration
HP-1A Replacement carbon monoxide test tube - box of 10HP-2A Replacement carbon dioxide test tube - box of 10HP-6A Replacement water vapor test tube - box of 10HP-109AD Replacement oil mist test tube - box of 10
Air Flow
Plugs directly into outlet fitting on
Breather Box® or high pressure
regulator.
LP-A4 Attaches
Here
100 psi Maximum Pressure
High Pressure Cylinder Air Test Module
Low Pressure CompressorAir Quality Test Module
Compressor Air Quality Test Module
LP-A4
Air Quality Test Kit
Complete Test Kits
Test Modules
LP-47PF Total particulate test module, maximum 20 psi - use with HP-A4 or HP-A445 - order pre-weighted filter (MW-47) separately MW-47 Pre-weighed 47mm filter in petri dish HP-A4 Cylinder air test module, 3000 psi maximum - use with test module LP-A4 HP-A445 Cylinder air test module, 5000 psi maximum - use with test module LP-A4LP-A4 Compressor air quality test module - 100 psi maxMWH-44 47mm filter holder only
Replacement Tubes for Kits and Modules
Item No. Description
Item No. Description
Item No. Description
LP/HP-A4K Contains LP-A4, HP-A4, LP-47PF, 4 boxes of assorted test tubes, and padded carry case – 3000 psi maximumLP/HPA445K Same as above kit, includes HP-A445 test module in place of HP-A4 module – 5000 psi maximum
Cylinder Air Test ModuleCGA-346 (3000 psi)
HP-A4
Cylinder Air Test ModuleCGA-347 (5000 psi)
HP-A445
Air Flow
Please specify fitting.
25 Contact us at (800) 866-8100 or [email protected]
Air Quality Test KitLP/HPA445K
47 mm Filter Pre-weightedMW-47
Total Particulate Test ModuleLP-47PF
Air Systems’ breathing air quality test kits are designed to test the air produced by low pressure compressors (use model LP-A4) and compressed high pressure air in cylinders (use models HP-A4 or HP-A445). The tests are accomplished through the use of low cost detector tubes that provide a “go/no go” test of the air quality. If a high reading is found, this signals the user that they have a potentially unacceptable quality of breathing air. If this occurs, a laboratory analysis of the air components must be made to determine the exact readings of the air quality and take corrective action.