Download Rhinoceros

https://www.rhino3d.com/download

Download Grasshopper Plug-in for Rhino

http://www.grasshopper3d.com/page/download-1

Download our G-code generator files

http://5axismaker.com/5x/software/

- 5AXISMAKER Rhino gcode generator template.3dm (Rhino file)- 5AXISMAKER gcode generator V0.2.gh (Grashopper file)- 5AXISMAKER-gcode-generator manual.pdf (Manual)

Open RhinoIn Layers there is a switched off layer- keep it off ( the spin-dle geometry will come out when you connect the surface to grasshopper script)

In the command bar type grasshopper to load grasshopper plug-in

in grasshopper window open our grasshopper file

our g-code generator opensand ready to run

import any surface model in Rhino

example surface model is imported

Right click geometry tab - Set one Geometry - and click on your surface

Spindle model is visible now, g-code is generated, now adjust the settings for the final g-code result

In this case spindle goes through the model, firstly need to flip the surface of the model

In Flip Surface tab click and reverse the surface of the model

This is now ready for all other settings to be adjusted.