High Power Durability Digital Communication€¦ · JR001G Hammer Driver Drill HP001G Driver Drill DF001G Angle Grinder GA003G / GA005G / GA011G / ... Kertas penebat ... *Semua harga

BatteryBL4025 ( 2.5Ah ) DC40RA ADP10

Adapter for LXT BatteryBL4040 ( 4.0Ah )

Impact DriverTD001G

Charger

Digital Communication

Sistem Pintar 智能系统

DurabilityKetahanan 超耐用

High PowerKuasa Tinggi 高马力

Combination HammerHR001G / HR002G / HR003G

Impact WrenchTW001G

Recipro SawJR001G Hammer Driver

DrillHP001G Driver Drill

DF001G

Angle GrinderGA003G / GA005G / GA011G /GA013G / GA021G / GA023G /GA027G / GA029G Circular Saw

HS004G

4-LED fuel gauge indicatorPenunjuk tahap bateri电池电量计指示灯

WallDinding pelindung

防护墙

Terminal short-circuit prevention structureThe protection wall is provided between terminalsagainst water and dustStruktur pencegahan litar pintas terminalTerdapat dinding pelindung kalis air dan tahan debu di antara terminal端子防短路结构端子之间设有防水防尘保护墙

Battery railRel bateri 电池滑轨

High Rigidity Battery RailsDurable slide in battery rail that holds the battery and the tools firmly and securely to withstand high power productsSlaid bateri berkekuatan tinggiSlaid tahan lama di rel bateri untuk pegangan bateri dan alat kuasa dengan kukuh, sesuai untuk kerja yang berbeban tinggi高强度电池滑轨耐用的滑动式滑轨，可牢固地连接电池和工具，更适合高负荷的工作

Waterproof ringRing kalis air防水圈

CellSel bateri单元电池

FilmFilem胶片

Insulating paperKertas penebat绝缘纸

Waterproof Triple-layer Structure prevents cell failure due to water and dustStruktur kalis air tiga lapisanMencegah kerosakan bateri akibat air dan habuk三层防水结构防止因水和灰尘引起的电池故障

Built ToughHigh durability specifications specially designed for 40Vmax Li-ion batteriesSpesifikasi ketahanan tinggi direka khas untukbateri Li-ion 40Vmax专为 40Vmax 锂电池设计的高耐用性结构

Heavy duty outercasing and cell holderBekas lindung dan alas bateriyang kukuh 坚固的外壳和电池架

Create a space toabsorb impactRuang tambahan untuk menyerap hentaman创造额外吸收冲击力的空间

Shock absorption structureStruktur penyerapan kejutan减震结构

Optimum power supply systemand Optimum charging system

Digital communicationTool Battery Battery Charger

Alat Kuasa Bateri Pengecas BateriKomunikasi digital

工具电池充电器数码通讯

The XGT range of tools and batteries come with a built-in program, providing digital communication between the battery and tool. Allowing not only for the battery to talk with tool but also the tool to talk to the battery. Battery technology and motor engineering that work together for optimum performance.Sistem Bekalan Kuasa dan Pengecasan Pintar XGTBateri alat kuasa siri XGT mempunyai program terpasang untuk mewujudkan komunikasi dua hala antara bateri dan alat kuasa. Prestasi yang optimum dicapai dengan komunikasi antara teknologi bateri dan kejuruteraan motor yang berfungsi bersamaXGT智能充电供电系统XGT系列产品工具的电池都有一个内置程序，实现电池与工具之间双向的通信，使电池和电机达到理想的性能。

XGT is a new system with its own tools, batteries, and chargers. A combination of innovative tool design and higher output batteries provide a genuine solution for high demand industrial users.XGT adalah sistem baru dengan alat, bateri dan pengecas yang unik.Kombinasi reka bentuk alat inovatif dengan bateri output tinggi memberikan penyelesaian bagi pengguna industri permintaan tinggi.采用全新的XGT智能充电供电系统，具有独特的工具、电池和充电器。创新的工具设计和高输出的电池相结合，为高需求的工业用户提供了真正的解决方案。

Auto maintenance system with two cooling fans for providing more optimum fast charging

Sistem pengecasan pintarPengecas mempunyai sistem

penyelenggaraan automatik dan mempunyai dua kipas penyejuk

智能充电系统充电器具有自动维护系统，并且拥有两个冷却风扇

Optimumcharging system

DF001GD201 13mm (1/2")RM 5,047

Standard Equipment: Side Grip, Belt Clip, (+)(-) Bit, Bit Holder

• D201: 1x Fast Charger, 2x 2.5Ah Battery

• Excellent performance in continuous heavy duty applications

Cordless Driver DrillGerudi Pemutar Skru Tanpa Kord充电式螺丝起子电钻

Capacity Steel: 20mm (13/16") | Wood (Auger-Bit): 50mm (2") | Wood (Self-Feed Bit): 76mm (3") | Wood (Hole Saw): 152mm (6") | Siding Board: 220mm (8-5/8")Chuck Capacity 1.5 - 13mm (1/16" - 1/2")

No Load Speed (RPM) High: 0 - 2,600 | Low: 0 - 650

Max Fastening Torque Hard: 140 (1,240in.lbs.) | Soft: 68N·m (600 in.lbs.)

Max Lock Torque 125N·m (1,100in.lbs.)

Max Peak Torque 141N･m

Dimensions (L x W x H) 181x86x275mm (7-1/8"x3-3/8"x10-7/8")Net Weight 2.7 - 3.0kg (5.9 - 6.6lbs.)

Kapasiti 能力

Kapasiti Chuck 夹头能力

Kelajuan Tanpa Beban 回转数

Maksimum Tenaga Pemutaran Pengancing 最快扭力

Pemutaran Tenaga Maksimum 最大扭力

Pemutaran Maksimum 最大值扭力

Dimensi 体积

Berat Bersih 淨重

* Not applicable for Z model

HP001GD201 13mm (1/2")RM 5,100

Standard Equipment: Depth Gauge, Side Grip, Belt Clip,(+)(-) Bit, Bit Holder

• D201: 1x Fast Charger, 2x 2.5Ah Battery

• Excellent performance in continuous heavy duty applications

Cordless HammerDriver DrillTukul Pemutar Skru BergerudiTanpa Kord充电式冲击螺丝起子电钻

Capacity Steel: 20mm (13/16") | Wood (Auger-Bit): 50mm (2") | Wood (Self-Feed Bit): 76mm (3") | Wood (Hole Saw): 152mm (6") | Siding Board: 220mm (8-5/8") | Masonry: 20mm (13/16")Chuck Capacity 1.5 - 13mm (1/16" - 1/2")

Impacts Per Minute (IPM) High: 0 - 39,000 | Low: 0 - 9,750

No Load Speed (RPM) High: 0 - 2,600 | Low: 0 - 650

Max Fastening Torque Hard: 140 (1,240in.lbs.) | Soft: 68N·m (600 in.lbs.)

Max Lock Torque 125N·m (1,100in.lbs.)

Max Peak Torque 141N･m


Kapasiti 能力

Kapasiti Chuck 夹头能力

Impak Per Minit 冲击数



Pemutaran Tenaga Maksimum 最大扭力

Pemutaran Maksimum 最大值扭力

Dimensi 体积

Berat Bersih 淨重* Not applicable for Z model

HP001GDF001G

-24mm

205mmPredecessor Model 18V

*HP001G: 182mm

Compact overall length

181mmDF001G

Max FasteningTorque

Maksimum Tenaga PemutaranPengancing 最快扭力

140N·m

STOP

Active Feedback sensing TechnologyTorque limiter turns the motor off if the

tool is suddenly forced to lockTeknologi Sensor Maklum Balas Automatik

Sekiranya alat ini terkunci secara tidak sengaja, pembatas tork secara automatik akan mematikan motor

AFT 主动反馈传感技术如果工具被意外锁定, 扭矩限制器会自动关闭电机

41 electronic clutch settingsA wider range of heavy-duty applications

achieved by increasing clutch settings41 tetapan clutch elektronik

(21 tahap dalam mod tinggi) Merealisasikan rangkaian aplikasi tugas berat yang lebih luas dengan meningkatkan tetapan clutch

41级电子离合器设置（高模式下21级设置)通过增加离合器档位设置实现更广泛的重型应用

*All list price shown are for reference only (exclude SST).*Semua harga yang ditunjukkan adalah untuk rujukan sahaja (tidak termasuk SST). 所有显示的建议零售价仅供参考（不包括SST）。

TD001GD201 | TD001GZRM 4,525 RM 1,717

Standard Equipment: Belt Clip

• D201: 1x Fast Charger, 2x 2.5Ah Battery• Z: Without Charger, Battery & Carrying Case

• 4-speed power selection plus 6 Assist modes (2 T-modes, 1 Wood mode, 3 Bolt modes)

Cordless Impact DriverPemutar Skru Impak Tanpa Kord充电式冲击螺丝起子机

Capacity Machine Screw: M4 - M8 (5/32" - 5/16") Standard Bolt: M5 - M16 (3/16" - 5/8") High Strength Bolt: M5 - M14 (3/16" - 9/16") Coarse thread (in length): 22 - 125 mm (7/8" - 4-7/8")Hex Shank 6.35 mm (1/4")

No Load Speed (RPM) Max / Hard / Med / Soft / Wood / Bolt (1) / Bolt (2) / Bolt (3) / T (1) / T (2) mode: 0 - 3,700 / 3,200 / 2,100 / 1,100 / 1,800 / 2,500 / 3,700 / 3,700 / 2,400 / 3,700Impacts Per Minute (IPM) Max / Hard / Med / Soft / Wood / Bolt (1) / Bolt (2) / Bolt (3) / T (1) / T (2) mode: 0 - 4,400 / 3,600 / 2,600 / 1,100 / 4,400 / N/A / 4,400 / 4,400 / N/A / 2,600Max Fastening Torque 220N·m (1,950in.lbs.)

Fastening Torque Hard: 170N·m(1,510in.lbs.) | Med: 50N·m(440in.lbs.) | Soft: 20N·m (180in.lbs.)


Kapasiti 能力

Batang Heksagon 六角柄




Tenaga Pemutaran Pengancing扭力

Dimensi 体积

Berat Bersih 淨重* Not applicable for Z model

TW001GM201 19mm (3/4")RM 6,568

Standard Equipment: Belt Clip

• M201: 1x Fast Charger, 2x 4.0Ah Battery

• Higher torque and more compact than DTW1001

Cordless Impact WrenchPerengkuh Impak Tanpa Kord充电式冲击套筒扳手

Fastening Capacities Standard Bolt: M12 - M36 (1/2" - 1-7/16") High Strength Bolt: M10 - M27 (3/8" - 1-1/16")Square Drive 19 mm (3/4")

No Load Speed (RPM) Max: 0 - 1,800 | Hard: 1,400 | Mid: 1,150 | Soft: 950

Impacts Per Minute (IPM) Max: 0 - 2,500 | Hard: 2,400 | Mid: 2,200 | Soft: 1,900

Max Fastening Torque 1,800N·m (1,330ft.lbs.)

Nut-Busting Torque 2,050N·m (1,510ft.lbs.)


Kapasiti 能力

Batang Segi Empat 四方头




Tork Pengetatan Bolt 螺栓拧紧扭力

Dimensi 体积

Berat Bersih 淨重


TW001GTD001G

Max FasteningTorque

Maksimum Tenaga PemutaranPengancing 最快扭力

220N·m

TD001G 2.5s115100Predecessor Model 18V

Fastening speedLow High

Drove ø6.5 x 120mm metal fastening screws

10 Tightening modes10 mod pengetatan 10种紧固模式

4-speed power selection+

6-Assist modes

TW001G

Usability improvementImpact power selection: 4 stages

Forward and Reverse Rotation auto stopForward: 3 mode / Reverse: 3 mode

4 tahap pilihan daya impakKelajuan dan daya hentakan yang sesuai dapat dipilih

mengikut keperluan4个等级冲击力选择

可根据实际工作的需要选择合适的速度和冲击力

TD001G


Cordless Combination HammerTukul Kombinasi Tanpa Kord 充电式冲击钻锤

Light weightRingan 轻量

3.9kgwith BL4025

2.5Ah Battery

Anti-vibration grip

Counterweight Vibrationabsorbing

handle

Vibration LevelTahap getaran 振动等级 7.0m/s2

STOP

Active Feedback Sensing TechnologyTeknologi Sensor Maklum Balas Automatik

自动回顾感应科技

(HR001G / HR002G only)

Accessories (Optional)Aksesori 配件

Dust extraction system setSet sistem pengumpulan habuk集尘系统

DX12for HR001G/HR003G

DX14for HR002G

Filter cleaning mechanismMekanisme pembersihan penapis过滤器清洁机构

Built-in DC motor for dust collectionMotor DC terbina dalam untuk pengumpulan habuk内置直流除尘电机

HR003GM201 | HR003GZ 28mm (1-1/8")RM 5,898 RM 2,725

Standard Equipment: Side Grip, Depth Gauge

• M201: 1x Fast Charger, 2x 4.0Ah Battery• Z: Without Charger, Battery & Carrying Case

• 3-mode operation for "Rotation Only", "Hammering with Rotation" or "Hammering Only"

Cordless Combination HammerTukul Kombinasi Tanpa Kord充电式冲击钻锤

Impact Energy EPTA-Procedure 05/2009: 2.8J Our experimental conditions: 3.2JCapacity Concrete: 28mm(1-1/8") | Steel: 13mm(1/2") | Wood: 32mm(1-1/4") | Core Bit: 54mm(2-1/8") | Diamond Core Bit (Dry Type): 65mm (2-9/16")

Impact Per Minute (IPM) 0 - 5,000

No Load Speed (RPM) 0 - 980


Kekuatan Impak 单次最大锤击力

Kapasiti 能力



Dimensi 体积

Berat Bersih 淨重


HR001GM201 28mm (1-1/8")RM 6,373

Standard Equipment: Side Grip, Depth Gauge, Cloth,Grease Vessel (194683-7)


• Auto-start Wireless System (AWS) connects to vacuum cleaner with Bluetooth


Impact Energy EPTA-Procedure 05/2009: 2.8J Our experimental conditions: 3.2JCapacity Concrete: 28mm(1-1/8") | Steel: 13mm(1/2") | Wood: 32mm(1-1/4") | Core Bit: 54mm(2-1/8") | Diamond Core Bit (Dry Type): 65mm (2-9/16")



Dimensions (L x W x H) 358x102x232mm (14-1/8"x4"x9-1/8")Net Weight 3.9 - 4.6kg (8.6 - 10.1lbs.)


Kapasiti 能力



Dimensi 体积

Berat Bersih 淨重


HR002GM201 28mm (1-1/8")RM 6,770

Standard Equipment: Side Grip, Depth Gauge, Cloth,Grease Vessel (194683-7), Drill Chuck (199139-5)


• Auto-start Wireless System (AWS) connects to vacuum cleaner with Bluetooth


Impact Energy EPTA-Procedure 05/2009: 2.9J

Capacity Concrete: 28mm(1-1/8") | Steel: 13mm(1/2") | Wood: 32mm(1-1/4") | Core Bit: 54mm(2-1/8") | Diamond Core Bit (Dry Type): 65mm (2-9/16")



Dimensions (L x W x H) 389x102x232mm (15-1/4"x4"x9-1/8")Net Weight 4.1 - 4.6kg (9.0 - 10.1lbs.)


Kapasiti 能力



Dimensi 体积

Berat Bersih 淨重



GA011GM201 | GA011GD201 100mm (4")RM 4,960 RM 4,595

Standard Equipment: Grinding Wheel (A-80852), Wheel Cover, Side Grip, Lock Nut Wrench

• M201: 1x Fast Charger, 2x 4.0Ah Battery• D201: 1x Fast Charger, 2x 2.5Ah Battery

• Genuine solution for high demand industrial applications

Cordless Angle GrinderPengisar Sudut Tanpa Kord充电式角向磨光机

Wheel Diameter 100mm (4")

Hole Diameter 16mm (5/8")

Max Wheel Thickness 6.4mm (1/4")

No Load Speed (RPM) 8,500


Diameter Roda 轮片直径

Diameter Lubang 孔直径

Ketebalan Roda Maksimum 最大轮片厚度


Dimensi 体积

Berat Bersih 淨重


GA021GM201 | GA021GD201 | GA021GZ 100mm (4")RM 5,055 RM 4,690 RM 1,883


• M201: 1x Fast Charger, 2x 4.0Ah Battery• D201: 1x Fast Charger, 2x 2.5Ah Battery• Z: Without Charger, Battery & Carrying Case

• Auto-start Wireless System (AWS) connects to compatible vacuum cleaners with Bluetooth





No Load Speed (RPM) 3,000 - 8,500






Dimensi 体积

Berat Bersih 淨重


GA003GM201 | GA003GD201 100mm (4")RM 4,867 RM 4,502



• Excellent in continuous heavy-duty work











Dimensi 体积

Berat Bersih 淨重


Cordless Angle GrinderPengisar Sudut Tanpa Kord 充电式角向磨光机

Active Feedback Sensing Technology Teknologi Sensor Maklum Balas Automatik

自动回顾感应科技

Time

Sudden reduction of rotational speed

Auto-Stop

Shuts down the tool to protect the user, if the rotation speed suddenly slows down

Alat kuasa akan berhenti secara automatic untuk melindungi pengguna jika kelajuan putaran tiba-tiba melambat若旋转速度突然降低，工具将自动关闭以保护保护使用者

Delivers same power as 1,000W corded grinders

Memberi kuasa yang sama denganPengisar Sudut 1,000W

提供与1,000W有线打磨机相同的功率

Model No.型号

No Load Speed (rpm)Kelajuan Tanpa Beban

回转数

SwitchSuis开关100mm 125mm

GA003G GA005G ••• • 8,500 Slide • GA011G GA013G ••• • 8,500 Paddle • GA021G GA023G •••• • 3,000 - 8,500 Slide • GA027G GA029G •••• • 3,000 - 8,500 Paddle •

Anti-restart functionFungsi restart semula

防重启功能








Hole Diameter 22.23mm (7/8")








Dimensi 体积

Berat Bersih 淨重
















Dimensi 体积

Berat Bersih 淨重
















Dimensi 体积

Berat Bersih 淨重


GA005GM201 | GA005GD201 125mm (5")RM 4,865 RM 4,502



• Genuine solution for high demand industrial applications











Dimensi 体积

Berat Bersih 淨重


GA013GM201 | GA013GD201 125mm (5")RM 4,960 RM 4,595



• BL motor to run cooler and more efficiently for longer life











Dimensi 体积

Berat Bersih 淨重



Cordless Circular SawGergaji Piring Tanpa Kord 充电式圆锯


4.7kgwith BL4040

4.0Ah Battery

Spee

dFa

st

Automatic torque drive

High

On light duty :High-speed rotation mode

On heavy duty :High torque mode

Torque (load)

Automatic Torque Drive TechnologyTeknology Tork Automatik

自动扭力驱动科技

Compatible with guide rail without adapter

Sesuai dengan rel panduan tanpa penyesuai兼容不带适配器的导轨

Cordless Recipro SawGergaji Resipro Tanpa Kord 充电式往复锯


4.2kgwith BL4025

2.5Ah Battery

Blade ejection lever

Toolless blade changePenggantian bilah tanpa alat 免工具更换刀片

JR001GM201 | JR001GZRM 5,312 RM 2,140

Standard Equipment:Recipro Saw Blades 3pcs (B-05038, B-05044, B-05153)


• Compact & High Power

Cordless Recipro SawGergaji Resipro Tanpa Kord充电式往复锯

Length of Stroke 32mm (1-1/4")

Strokes Per Minute (SPM) High: 0 - 3,000 | Low: 0 - 2,300

Capacity Pipe: 130mm (5-1/8") Wood: 255mm (10")Dimensions (L x W x H) 457x88x233mm (18"x3-1/2"x9-1/8")Net Weight 4.2 - 4.5kg (9.3 - 9.9lbs.)

Panjang Strok 冲程长度

Kelajuan Strok 冲程速度

Kapasiti 能力

Dimensi 体积

Berat Bersih 淨重


HS004GM201 | HS004GZ 190 / 185mm (7-1/2" / 7-1/4")RM 6,220 RM 3,048

Standard Equipment: TCT Saw Blade (B-62022), Dust Nozzle,Hex Wrench, Guide Rule


• Lightweight & High Power

Cordless Circular SawGergaji Piring Tanpa Kord充电式圆锯

Blade Diameter 190mm (7-1/2") | 185mm (7-1/4")

Hole Diameter 15.88mm (5/8") | 20mm (13/16") | 30mm (1-3/16")

Max Cutting Capacity 90°: 62.5 / 60 mm (2-7/16" / 2-3/8") 45°: 44.5 / 43 mm (1-3/4" / 1-11/16") 48°: 42 / 41 mm (1-5/8" / 1-5/8")



Diameter Bilah 锯片直径


Kapasiti Pemotongan Maksimum最大切割能力


Dimensi 体积

Berat Bersih 淨重



Documents

High Power Durability Digital Communication€¦ · JR001G Hammer Driver Drill HP001G Driver Drill DF001G Angle Grinder GA003G / GA005G / GA011G / ... Kertas penebat ... *Semua harga