HomeWorks QS Power Supply with Wire Harnesses SPEC …HomeWorks ® QS Power Supply with Wire Harnesses Mount Power Supply Remove Power Supply Mounting • The power supply unit is

www.lutron.com 1

product specifications 11.09.15369885d

HomeWorks® QS Power Supply with Wire HarnessesThe HomeWorks® QS Power Supply provides power to the HomeWorks® QS processor as well as system devices and interfaces.

Featuring easy assembly on a DIN rail, the power supply unit delivers 24 V- output voltage and conforms with UL1310 for IEC SELV / NEC® Class 2 applications.

For power management details, use the HomeWorks® QS design utility and power draw documentation found on the Lutron® HomeWorks® Resources website (http://resi.lutron.com/).

HomeWorks® QS Power Supply with wire harnesses have 2 wire harnesses preinstalled. For installation outside a processor panel, order the QSPS-DH-1-75, which does not include a wire harness.

Model Number

QSPS-DH-1-75-H

HomeWorks® QS Power Supply with wire harnesses QSPS-DH-1-75-H

L(+) N(-)

100 - 277 VInput / Entrada / Entrée

24 VOutput / Salida / Sortie

22.5 - 25 V

Technical Support: +1.800.523.9466 (U.S.A. / Canada)

+44.(0)20.7680.4481 (Europe)

www.lutron.com 2


HomeWorks® QS Power Supply with Wire HarnessesSpecifications

Model Number QSPS-DH-1-75-H

Power Nominal Input Voltage: 100 V~ to 277 V~ 50 / 60 Hz

Frequency: 50 / 60 Hz

Current Consumption, Fully Loaded (typical):

0.5 A (277V~) 0.7 A (230V~) 1.0 A (120V~) 1.3 A (100V~)

Output: 24 V- +/- 1%, 2.5A IEC SELV / NECR Class 2

Power Draw Units (PDUs):

*

Supplies 75 PDUs maximum.*

Use above this maximum will reduce the lifetime of the supply and void all Lutron warranties. For more information about Power Draw Units (PDUs), please refer to www.lutron.com/TechnicalDocument Library/ 369405%20pdu%20spec%20submittal.pdf

BTU 28 BTU / h

Environment Ambient operating temperature: 32 °F to 131 °F (0 °C to 55 °C).

Ambient operating humidity: 0% to 90% humidity, non-condensing. Indoor use only.

60 °C maximum calibration point temperature refer to: www.lutron.com/TechnicalDocumentLibrary/048466.pdf

Mounting Mount using 1.38 in (35 mm) DIN rail in accordance with EN 60715

Dimensions 3.54 in (90 mm) × 3.54 in (90 mm) × 2.40 in (61 mm)

Regulatory Approvals UL, cUL, CE, NOM compliant

Efficiency Meets the U.S. Department of Energy level VI efficiency standard

Warranty www.lutron.com/TechnicalDocumentLibrary/Warranty.pdf www.lutron.com/TechnicalDocumentLibrary/Intl_Warranty.pdf


+44.(0)20.7680.4481 (Europe)

www.lutron.com 3


HomeWorks® QS Power Supply with Wire HarnessesDimensions

Measurements shown as: in (mm)

4.63 (118)

L(+) N(–)

100 – 277 VInput / Entrada / Entrée


22.5 – 25 V

1.77 (45)3.54 (90)

13.25 (337)


+44.(0)20.7680.4481 (Europe)

3.54 (90)

2.17 (55)

1.73 (44)

2.40 (61)

1.97 (50)

Calibration Point

www.lutron.com 4


HomeWorks® QS Power Supply with Wire Harnesses

Mount Power Supply Remove Power Supply

Mounting

• The power supply unit is suitable for use in HomeWorks® QS enclosures and applications only. Note: For installation outside a processor panel order the QSPS-DH-1-75, which doesn’t include a wire harness.

• Damage will result if this product is used with HomeWorks® Illumination or Interactive equipment.

• Mount the QSPS-DH-1-75-H Power Supply in a HomeWorks® QS enclosure.

Note: This equipment is air-cooled. Mount in a location where the vented cover will not be blocked; minimum 1.18 in (30 mm) above and below is required to reduce the risk of overheating and possible damage to equipment. Failure to provide adequate space for cooling may result in overheating and void the warranty.

• The power supply can be snapped onto any DIN rail in accordance with EN 60715. The device must be mounted horizontally (connection terminal blocks on top).


+44.(0)20.7680.4481 (Europe)


HomeWorks® QS Power Supply with Wire Harnesses

L(+) N(-)



22.5 - 25 V

L(+) N(-)



22.5 - 25 V

+24 V-– ( Common)

L(+) N(-)



22.5 - 25 V

Wiring Diagram

HomeWorks® QS Power SupplyQSPS-DH-1-75-H

HomeWorks® QS Processor HQP6-2

Preinstalled wire Harnesses

5www.lutron.com


+44.(0)20.7680.4481 (Europe)

+24 V- – ( Common)

www.lutron.com 6


HomeWorks® QS Power Supply with Wire HarnessesConfiguration

L(+) N(-)



22.5 - 25 V

L(+) N(-)



22.5 - 25 V

L(+) N(-)



22.5 - 25 V

PWR

ERR

P P

L1 TX/RX

L2 TX/RX

L1

L2

PWR

ERR

P P

L1 TX/RX

L2 TX/RX

L1

L2

L(+) N(-)



22.5 - 25 V

L(+) N(-)



22.5 - 25 V

L(+) N(-)



22.5 - 25 V

L(+) N(-)



22.5 - 25 V

L(+) N(-)



22.5 - 25 V

PWR

ERR

P P

L1 TX/RX

L2 TX/RX

L1

L2

PWR

ERR

P P

L1 TX/RX

L2 TX/RX

L1

L2

L(+) N(-)



22.5 - 25 V

L(+) N(-)



22.5 - 25 V

L(+) N(-)



22.5 - 25 V

L(+) N(-)



22.5 - 25 V

L(+) N(-)



22.5 - 25 V

PWR

ERR

P P

L1 TX/RX

L2 TX/RX

L1

L2

PWR

ERR

P P

L1 TX/RX

L2 TX/RX

L1

L2

L(+) N(-)



22.5 - 25 V

L(+) N(-)



22.5 - 25 V

L-LV14

L-LV21/HQ-LV21 PNL-8

Power Supply Breaker Feed

QSPS-DH-1-75-H power supplies have a large capacitive inrush when first powered. A dedicated breaker feed with no more than the indicated number of power supplies is required to avoid nuisance tripping.

Voltage Breaker Size/Type Max QSPS-DH-1-75-H Units

100 V~ to 127 V~15 A QO series standard trip curve 1320 A QO series standard trip curve 15

220 V~ to 277 V~

10 A (B trip curve) 210 A (C trip curve) 310 A (D trip curve) 616 A (B trip curve) 316 A (C trip curve) 516 A (D trip curve) 10


+44.(0)20.7680.4481 (Europe)

Documents

HomeWorks QS Power Supply with Wire Harnesses SPEC …HomeWorks ® QS Power Supply with Wire Harnesses Mount Power Supply Remove Power Supply Mounting • The power supply unit is