IBJSC.com | I-WEB.com.vn Manual 1041111870

8/8/2019 IBJSC.com | I-WEB.com.vn Manual 1041111870

1/104

AV Surround Receiver

SR6005

ESPAOL FRANAIS ENGLISH


2/104


3/104

I

ENGLISHFRANAISESPAOL

nSAFETYPRECAUTIONS

CAUTIONRISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION:TOREDUCETHERISKOFELECTRICSHOCK,DONOTREMOVECOVER(ORBACK).NOUSER-SERVICEABLEPARTSINSIDE.REFERSERVICINGTOQUALIFIEDSERVICEPERSONNEL.

The lightning ash with arrowhead symbol, within an equilateraltriangle, is intended to alert the user to the presence o

uninsulated dangerous voltage within the products enclosure

that may be o sufcient magnitude to constitute a risk o

electric shock to persons.

The exclamation point within an equilateral triangle is intended

to alert the user to the presence o important operating

and maintenance (servicing) instructions in the literature

accompanying the appliance.

WARNING:TOREDUCETHERISKOFFIREORELECTRICSHOCK,DONOTEXPOSETHISAPPLIANCETORAINORMOISTURE.

CAUTION:To completely disconnect this product rom the mains, disconnect the plug

rom the wall socket outlet.

The mains plug is used to completely interrupt the power supply to the unit

and must be within easy access by the user.

PRECAUTION:Pour dconnecter compltement ce produit du courant secteur, dbranchez

la prise de la prise murale.

La prise secteur est utilise pour couper compltement lalimentation de

lappareil et lutilisateur doit pouvoir y accder acilement.

PRECAUCIN:Para desconectar completamente este producto de la alim entacin elctrica,

desconecte el enchue del enchue de la pared.

El enchue de la alimentacin elctrica se utiliza para interrumpir por completo

el suministro de alimentacin elctrica a la unidad y debe de encontrarse en

un lugar al que el usuario tenga cil acceso.

IMPORTANTSAFETYINSTRUCTIONS

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings.

Install in accordance with the manuacturers instructions.

8. Do not install near any heat sources such as radiators, heat registers,

stoves, or other apparatus (including amplifers) that produce heat.9. Do not deeat the saety purpose o the polarized or grounding-type plug. A

polarized plug has two blades with one wider than the other. A grounding

type plug has two blades and a third gr ounding prong. The wide blade or the

third prong are provided or your saety. I the provided plug does not ft into

your outlet, consult an electrician or replacement o the obsolete outlet.

10. Protect the power cord rom being walked on or pinched particularly at

plugs, convenience receptacles, and the point where they exit rom the

apparatus.

11. Only use attachments/accessories specifed by the manuacturer.

12. Use only with the cart, stand, tripod, bracket, or table

specifed by the manuacturer, or sold w ith the apparatus.

When a cart is used, use caution when moving the cart/

apparatus combination to avoid injury rom tip-over.

13. Unplug this apparatus during lightning storms or when

unused or long periods o time.

14. Reer all servicing t o qualifed service personnel.Servicing is required when the apparatus has been damaged in any way,

such as power-supply cord or plug is damaged, liquid has been spilled or

objects have allen into the apparatus, the apparatus has been exposed to

rain or moisture, does not operate normally, or has been dropped.

15. Batteries shall not be exposed to excessive heat such as sunshine, fre or

the like.

FCCINFORMATION(ForUScustomers)

1.PRODUCTThis product complies with Part 15 o the FCC Rules. Operation is subject

to the ollowing two conditions: (1) this product may not cause harmul

intererence, and (2) this product must accept any intererence received,

including intererence that may cause undesired operation.

2.IMPORTANTNOTICE:DONOTMODIFYTHISPRODUCTThis product, when installed as indicated in the instructions contained

in this manual, meets FCC requirements. Modifcation not expressly

approved by Marantz may void your authority, granted by the FCC, to use

the product.

3.NOTEThis product has been tested and ound to comply with the limits or

a Class B digital device, pursuant to Part 15 o the FCC Rules. These

limits are designed to provide reasonable protection against harmul

intererence in a residential installation.

This product generates, uses and can radiate radio requency energy and,

i not installed and used in accordance with the instructions, may cause

harmul intererence to radio communications. However, there is no

guarantee that intererence will not occur in a particular installation. I this

product does cause harmul intererence to radio or television reception,

which can be determined by turning the product OFF and ON, the user

is encouraged to try to correct the intererence by one or more o the

ollowing measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the product into an outlet on a circuit dierent rom that to

which the receiver is connected.

Consult the local retailer authorized to distribute this type o product or

an experienced radio/TV technician or help.

ForCanadiancustomers:This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numrique de la classe B est conorme la norme NMB-003 du

Canada.


4/104

II

ENGLISH FRANAIS ESPAOL

nNOTESONUSE/OBSERVATIONSRELATIVESALUTILISATION/NOTASSOBREELUSO

WARNINGS AVERTISSEMENTS ADVERTENCIAS Avoid high temperatures.

Allow or sufcient heat dispersion when

installed in a rack.

Handle the power cord careully.

Hold the plug when unplugging the cord.

Keep the unit ree rom moisture, water, and

dust.

Unplug the power cord when not using the unit

or long periods o time.

Do not obstruct the ventilation holes.

Do not let oreign objects into the unit.

Do not let insecticides, benzene, and thi nner

come in contact with the unit.

Never disassemble or modiy the unit in any way.

Ventilation should not be impeded by covering

the ventilation openings with items, such as

newspapers, tablecloths or curtains.

Naked ame sources such as lighted candles

should not be placed on the unit.

Observe and ollow local regulations regarding

battery disposal.

Do not expose the unit to dripping or splashing

uids.

Do not place objects flled with liquids, such as

vases, on the unit.

Do not handle the mains cord with wet hands. When the switch is in the OFF position, t he

equipment is not completely switched o rom

MAINS.

The equipment shall be installed near the

power supply so that the power supply is easily

accessible.

Eviter des tempratures leves.

Tenir compte dune dispersion de chaleur

sufsante lors de linstallation sur une tagre.

Manipuler le cordon dalimentation avec

prcaution.

Tenir la prise lors du dbranchement du cordon.

Protger lappareil contre lhumidit, leau et la

poussire.

Dbrancher le cordon dalimentation lorsque

lappareil nest pas utilis pendant de longues

priodes.

Ne pas obstruer les trous daration.

Ne pas laisser des objets trangers dans

lappareil.

Ne pas mettre en contact des insecticides, du

benzne et un diluant avec lappareil.

Ne jamais dmonter ou modifer lappareil dune

manire ou dune autre.

Ne pas recouvrir les orifces de ventilation avec

des objets tels que des journaux, nappes ou

rideaux. Cela entraverait la ventilation.

Ne jamais placer de amme nue sur lappareil,

notamment des bougies allumes.

Veillez respecter les lois en vigueur lorsque

vous jetez les piles usages.

Lappareil ne doit pas tre expos leau ou lhumidit.

Ne pas poser dobjet contenant du liquide, par

exemple un vase, sur lappareil.

Ne pas manipuler le cordon dalimentation avec

les mains mouilles.

Lorsque linterrupteur est sur la position OFF,

lappareil nest pas compltement dconnect du

SECTEUR (MAINS).

Lappareil sera install prs de la source

dalimentation, de sorte que cette dernire soit

acilement accessible.

Evite altas temperaturas.

Permite la sufciente dispersin del calor cuando

est instalado en la consola.

Maneje el cordn de energa con cuidado.

Sostenga el enchue cuando desconecte el

cordn de energa.

Mantenga el equipo libre de humedad, agua y

polvo.

Desconecte el cordn de energa cuando no

utilice el equipo por mucho tiempo.

No obstruya los orifcios de ventilacin.

No deje objetos extraos dentro del equipo.

No permita el contacto de insecticidas, gasolina

y diluyentes con el equipo.

Nunca desarme o modifque el equipo de

ninguna manera.

La ventilacin no debe quedar obstruida por

haberse cubierto las aperturas con objetos como

peridicos, manteles o cortinas.

No debern colocarse sobre el aparato uentes

inamables sin proteccin, como velas

encendidas.

A la hora de deshacerse de las pilas, respete la

normativa para el cuidado del medio ambiente.

No exponer el aparato al goteo o salpicaduras

cuando se utilice. No colocar sobre el aparato objetos llenos de

lquido, como jarros.

No maneje el cable de alimentacin con las

manos mojadas.

Cuando el interruptor est en la posicin OFF, el

equipo no est completamente desconectado de

la alimentacin MAINS.

El equipo se instalar cerca de la uente de

alimentacin de manera que resulte cil acceder

a ella.

nCAUTIONSONINSTALLATION PRCAUTIONSDINSTALLATION EMPLAZAMIENTODELAINSTALACIN

z z

z

WallParoiPared

z

zForproperheatdispersal,donotinstallthisunitinaconfnedspace,suchasabookcaseorsimilarenclosure. More than 0.3 m (12 in.) is recommended.

Do not place any other equipment on this unit.

zPour permettre la dissipationde chaleurrequise, ninstallezpascetteunitdansunespaceconfntelquunebibliothqueouunendroitsimilaire. Une distance de plus de 0,3 m (12 po) est recommande.

Ne placez aucun matriel sur cet appareil.

zPara ladispersindel calor adecuadamente, noinstale este

equipoenunlugarconfnadotalcomounalibreraounidadsimilar. Se recomienda dejar ms de 0,3 m (12 pulg.) alrededor.

No coloque ningn otro equipo sobre la unidad.


5/104

1

B

asicversion

Simpleversion

Advan

cedversion

Information

ENGLISHDEUTSCHFRANAISITALIANOESPAOLNEDERLANDSSVENSKA

Contents

Thank you or purchasing this Marantz product. To ensure proper operation, please read this user guide careully beore using the product.

Ater reading them, be sure to keep them or uture reerence.

Getting started

Simpleversion(Simplesetupguide)4

Basicversion13

Connections 14Important inormati on 14

Connecting an HDMI-compatible device 15

Connecting a TV17

Connecting a Blu-ray Disc player / DVD player 17

Connecting a set-top box (Satellite tuner/cable TV) 18

Connecting a video cassette recorder 18

Connecting a digital camcorder 19Connecting an iPod or USB memory device to the USB port19

Connecting a CD player 20

Connecting an antenna 20

Connecting a wireless receiver (RX101) 21

Connect a device that has a multichannel output terminal 22

Connecting a external power amplifer 22

Playback(Basicoperation)23Important inormati on 23

Playing a Blu-ray Disc player/DVD player 24

Playing a CD player 24

Playing a USB memory device24

Playing an iPod26

Tuning in radio stations 27

Selectingalisteningmode(Surroundmode) 31

Multi-channel playback 31Stereo playback 33

Direct playback 33

Dolby Virtual Speaker/Dolby Headphone playback 33

Advancedversion34

Speakerinstallation/connection(Otherthan7.1-channelsystemwithsurroundbackspeakers)35

Install 35

Connect 36Set up speakers 39

Connections(Advancedconnection)40REMOTE CONTROL jacks 40

RS-232C connector 41

DC OUT (TRIGGER OUT) jacks 41

Playback(Advancedoperation)42Convenient unctions 42

PlaybackinZONE2(Separateroom)45q ZONE2 playback by speaker output 45

w ZONE2 playback by audio output 45

Playback 46

Howtomakedetailedsettings47Menu map 47

Examples o menu and ront display 48

Inputting characters 49

Input Setup 50

Audio/Video Adjust 56

Manual Setup61

Inormation 68

Othersettings68Remote control setti ngs 68

Operatingtheconnecteddevicesbyremotecontrolunit 69Operating AV equipment 69

Registering preset codes 70

Operating components 71

Operating learn unction 72

Operating macro unction 74

Setting the back light 75

Inormation76

Partnamesandunctions77Front panel 77

Display 78

Rear panel 79Remote control unit 80

Otherinormation82Trademark inormation82

Surround 83

Relationship between video signals and monitor output 87

Explanation o terms 88

Troubleshooting 90Resetting the microprocessor 92

Specifcations93

Gettingstarted1Accessories 2

About this manual 2

Features 2

Cautions on handling 3

Listopresetcodes End o this manual


6/104

2

ENGLISH DEUTSCH FRANAIS ITALIANO ESPAOL NEDERLANDS SVENSKA

Features

FullyDiscrete,identicalqualityandpowerorall7channels(110Wx7ch,8)The unit is equipped with a power amplifer that reproduces high-

fdelity sound in surround mode with equal quality and power or a ll

channels, true to the original sound.

The power amplifer circuit adopts a discrete-circuit confguration

that achieves high-quality surround sound reproduction.

SupportsHDMI 1.4awith 3D,ARC, DeepColor,x.v.Color,AutoLipsyncandHDMIcontrolunctionThis unit can output 3D video signals input rom a Blu-ray Disc

player to a TV that supports a 3D system. This unit also supports

the ARC (Audio Return Channel) unction, which reproduces TV

sound with this unit via an HDMI cable used or connecting the

unit and a TVz.

z The TV should support the ARC unction.

6-HDMIinputsand1-outputThe unit is equipped with 6 HDMI input connectors or connecting

devices with HDMI connectors, such as a Blu-ray Disc player,

game machine, HD video camera, etc.

One o the 6 input connectors o this unit is provided on the ront

panel so that you can easily connect and display images and videos

recorded in a digital still camera or digital video camera.

HighdefnitionaudiosupportThe unit is equipped with a decoder which supports high-quality

digital audio ormat or Blu-ray Disc players such as Dolby TrueHD,

DTS-HD Master Audio, etc.

DolbyProLogicgzThe unit is provided with a Dolby Pro Logic gz decoder. When

you play back the sound in Dolby Pro Logic gz playback with rontheight speakers connected to the unit, you can enjoy playback

sound with rich spacial expression.

AutosetupunctionThe unit is provided with an Auto setup unction which automatically

makes speaker settings best suited or the listening environment. The

sound rom the speakers is picked up with the supplied microphone.

Reecting sound and audio characteristics o speakers are measured,

and settings or an optimum sound feld are automatically made.

Easytouse,GraphicalUserInteraceThis unit is equipped with an easy to see Graphical UserInterace that uses menu displays and levels. The use o level

displays increases operability o the unit.

Allsourcesareup-scaledto1080pThe unit is provided with an HDMI video up-scaling unction that

converts an analog video signal input to the unit to a 1080p (HD

resolution) signal and supplies it to a TV via the HDMI connector.

This enables the unit and a TV connected with a single HDMI cable

and any video source to be reproduced precisely with HD level o

quality.

DirectplayoriPodandiPhoneviaUSBMusic data rom an iPod can be played back i you connect the

USB cable supplied with the iPod via the USB port o this unit, and

also an iPod can be controlled with the remote control unit or this

unit.

M-XPort(Marantz-eXtensionPort)This unit is equipped with the M-XPort, a Marantz original i nnovation

that provides outstanding expandability. You can connect the

Wireless Receiver RX101 (sold separately) to this port.

AccessoriesCheck that the ollowing parts are supplied with the product.

q User guide ...............................................................................1w Warranty card (or USA) ..........................................................1e Warranty card (or CANADA) ...................................................1r Power cord ..............................................................................1t Remote control unit (RC011SR) ..............................................1y R03/AAA batteries ...................................................................2u Setup microphone (ACM1H) ...................................................1i AM loop antenna (or HD Radio broadcasts) ........................... 1

o FM indoor antenna (or HD Radio broadcasts) ........................1

tr

i o

u

About this manualnOperation buttonsThe operations described in this guide are based mainly on remote

control operation.

n Symbols

v This symbol indicates a reerence page on whichrelated inormation is described.

This symbol indicates a supplementary inormation

and tips or operations.

NOTE This symbol indicates a supplementary inormationand tips or operations.

n IllustrationsNote that the illustrations in these instructions are or explanation

purposes and may dier rom the actual unit.


7/104

3

B

asicversion

Advan

cedversion

Information


Simpleversion

Cautions on handling

BeoreturningthepowerswitchonCheck once again that all connections are correct and that there are

no problems with the connection cables.

Power is supplied to some o the circuitry even when the unit is

set to the standby mode. When going on vacation or leaving home

or long periods o time, be sure to unplug the power cord rom the

power outlet.

AboutcondensationI there is a major dierence in temperature between the inside o

the unit and the surroundings, condensation (dew) may orm on

the operating parts inside the unit, causing the unit not to operate

properly.

I this happens, let the unit sit or an hour or two with the power

turned o and wait until there is little dierence in temperature

beore using the unit.

CautionsonusingmobilephonesUsing a mobile phone near this unit may result in noise. I that

occurs, move the mobile phone away rom this unit when it is in use.

MovingtheunitTurn o the power and unplug the power cord rom the power

outlet. Next, disconnect the connection cables to other system units

beore moving the unit.

AboutCare Wipe the cabinet and control panel clean with a sot cloth.

Follow the instructions when using a chemical cleaner.

Benzene, paint thinner or other organic solvents as well as

insecticide may cause material changes and discoloration i brought

into contact with the unit, and should thereore not be used.

SpeakerterminalorrontheightchannelThe unit is equipped with dedicated ront height channel speaker

terminals on the rear panel. You can enjoy 7.1-channel playback

using the ront height channel and 7.1-channel playback using the

surround back channel, without having to reconnect the speakers.

Othereatures Dolby Virtual Speaker (vpage 33)

Dolby Headphone (vpage 33) DTS Neural Surround (vpage 32)

Features


8/104

Simpleversion

4


Simple version (Simple setup guide)Here,weexplaintheentiresetupprocedure,romunboxingtheunittousingitinahometheater.TheSimpleversionsectionprovidesthespeakerinstallation,connection,andsetupmethodsorthe7.1-channelsystemwithsurroundbackspeakers.Fortheinstalling,connecting,andsetupmethodsospeakersotherthanthe7.1-channelsystem(withsurroundbackspeakers),seepage35.

n Before connecting the unit, turn off the power to all devices.

n For operation of the connected devices, refer to the user manuals for each device.

Play backdisc

(vpage 12)

EnjoyBlu-rayDiscandDVDinsurroundsound.

5

Set upspeakers

(vpage 7)

Use thesetup microphone(ACM1H)includedwiththeproduct, or automaticsetup.

4

Turn onpower

(vpage 7)

3

Connect(vpage 5)

Connect7.1-channelspeakers,aTVandBlu-rayDiscplayerequippedwithanHDMIconnector.

2

Install(vpage 5)

Enjoy better audio, usingthecorrectinstallmethod.

1

FinishSTEP6

StoreSTEP5

CheckSTEP4

CalculationSTEP3

MeasurementSTEP2

SpeakerDetection

STEP1

Preparation

Set up speakers (Audyssey Auto Setup)


9/104

5

B

asicversion

Advan

cedversion

Information


SimpleversionSpeakers

Careully check the let (L) and right (R)

channels and + (red) and (black) polarities

on the speakers being connected to the

this unit, and be sure to interconnect thechannels and polarities correctly.

Connectingthespeakercables

Peel o about 0.03 t/10 mm o sheathing rom

the tip o the speaker cable, then either twist the

core wire tightly or terminate it.

NOTE Connectsothatthespeakercablecorewires

do notprotrude romthe speaker terminal.Theprotectioncircuitmaybeactivatedithecorewirestouchtherearpanelorithe+andsidestoucheachother(vpage 89ProtectionCircuit).

Nevertouchthespeakerterminalswhilethepower supply is connected. Doing so couldresultinelectricshock.

Use speakerswith the speaker impedancesshownbelow.

SpeakerterminalsSpeaker

impedanceFRONT A 6 8

FRONT A + FRONT B 8

CENTER

6 8 SURROUND

SURR. BACK / AMP ASSIGN

FRONT B/HEIGHT

Install 1 2 3 4 5

Thisunitcanperorm2.0/2.1to7.1-channelsurroundplayback.This page provides the speaker installation procedure or the7.1-channelplaybackusingsurroundbackspeakersasanexample.

Thedeaultsettingis7.1-channel.Youcanalsoperorm5.1-channelplayback.

Toperorm5.1-channelplayback,connect5.1-channelspeakersonly.UseAudysseyAutoSetupunctionothisunitto automaticallydetectthenumberoconnectedspeakersandperormoptimalsettingsorthespeakerstobeused.

FL FR

C

SBL SBR

SL SR

SW

90 110

22 30

135 150

Listening

position

FL Front speaker (L) Install the surround speakers in a position 2 to3 t (60 to 90 cm) higher than ear level.

Surround backspeaker Point slightly

downwards

Frontspeaker

Surroundspeaker

2 3 t /60 90 cm

GViewedromthesideH

FR Front speaker (R)C Center speakerSW SubwooerSL Surround speaker (L)SR Surround speaker (R)SBL Surround back speaker (L)SBR Surround back speaker (R)

1 Connect 1 2 3 4 52

The Simple version section provides the speaker installation, connection, and setup methods for the 7.1-channel system with surround back speakers.For the installing, connecting, and setup methods of speakers other than the 7.1-channel system (with surround back speakers), see page 35.


10/104

6


Blu-ray Disc player and TV

Use only an HDMI (High Defnition Multimedia Interace) cable that bears the HDMI

logo (a genuine HDMI product). Using a cable without the HDMI logo (a non-genuine

HDMI product) may result in abnormal playback.

When outputting Deep Color or 1080p, etc., we recommend you use a High Speed

HDMI cable or a High Speed HDMI cable with Ethernetor enhanced high-quality

playback.

IN

HDMI

OUT

HDMI

To household power outlet

(AC 120 V, 60 Hz) Power cord

(supplied)

HDMI cable

(sold separately)

HDMI cable

(sold separately)

Blu-rayDiscplayer

TV

NOTE Donotpluginthepowercorduntilallconnectionshavebeencompleted. Do not bundle power cords together with connection cables. Doing so can result in humming or noise.

Connect


FL FR

C

SL SR

SW

SBL SBR

Speaker cables

(sold separately)

Audio cable

(sold separately)

Subwooer with

built-in amplifer


11/104

7

B

asicversion

Advan

cedversion

Information


Simpleversion

Theacousticcharacteristicsotheconnectedspeakersandlisteningroomaremeasuredand theoptimumsettingsare madeautomatically. Thisis calledAudysseyAutoSetup.Toperormmeasurement,placethesetupmicrophoneinmultiplelocationsall

aroundthelisteningarea.Forbestresults,werecommendyoumeasureinsixpositions,asshownintheillustration(uptosixpositions).

When perorming Audyssey Auto Setup, MultEQ/Dynamic EQ/Dynamic Volume

unctions become active (vpage 57, 58).

To set up the speakers manually, use Speaker Setup (vpage 61) on the menu.

NOTE Make the room as quiet as possible. Background noise can disrupt the room measurements. Close

windows, silence cell phones, televisions, radios, air conditioners, uorescent lights, home appliances,

light dimmers, or other devices as measurements may be aected by these sounds.

Cell phones should be placed away rom all audio electronics during the measurement process as Radio

Frequency Intererence (RFI) may cause measurement disruptions (even i the cell phone is not in use).

Do not unplug the setup microphone rom the main unit until Audyssey Auto Setup is completed.

Do not stand between the speakers and setup microphone or all ow obstacles in the path while themeasurements are being made. This will cause inaccurate readings.

Loud test sounds may be played during Audyssey Auto setup. This is part o

normal operation. I there is background noise in room, these test signals will

increase in volume.

Operating VOLUME +, during the measurements will cancel the measurements. Measurement cannot be perormed when headphones are connected.

Turn on power 1 2 3 4 53

1Turn on the TV and subwoofer

power.

Power on

2Change the TV input to the input of

this unit.

3Press ON to turn on power to the unit.The power indicator switches o, and power

is supplied to the unit.

Power on

Power on

NOTEBeore you use the remote control unit or the frst

time, be sure to insert the batteries (vpage 81

Inserting the batteries).

Set up speakers(Audyssey Auto Setup) 1 2 3 4 5

4


12/104

8


About setup microphone placement

Measurements are perormed by placing the setup microphone

successively at multiple positions throughout the entire listening

area, as shown in GExampleqH. For best results, we recommendyou measure in six positions, as shown in the illustration (up to six

positions).

Even i the listening environment is small as shown inGExamplewH,measuring at multiple points throughout the listening environment

results in more eective correction.

FL SW C FR

SR

SBL SBR

SL *M

FL SW C FR

SR

SBL SBR

SL *M

( : Measuring positions)

GExampleqH GExamplewH

( : Measuring positions)

FL Front speaker (L) SL Surround speaker (L)FR Front speaker (R) SR Surround speaker (R)C Center speaker SBL Surround back speaker (L)SW Subwooer SBR Surround back speaker (R)

About the main listening position (*M)The main listening position is the position where listeners would

normally sit or where one would normally sit alone within the listening

environment. Beore starting Audyssey Auto Setup, place the setup

microphone in the main listening position. Audyssey MultEQ uses

the measurements rom this position to calculate speaker distance,

level, polarity, and the optimum crossover value or the subwooer.



2 Set up the subwooferIf using a subwoofer capable of the following

adjustments, set up the subwoofer as shown below.

n When using a subwoofer with a direct modeSet the direct mode to On and disable the volume adjustment

and crossover requency setting.

n When using a subwoofer without a direct modeMake the ollowing settings:

Volume : 12 oclock position Crossoverrequency: Maximum/Highest Frequency Lowpassflter : O Standbymode : O

NOTEWhen you use two subwooers, please adjust the subwooer volume

controls individually so that each subwooer level is as close as

possible to 75 dB using the test tone (vpage 63) beore AudysseyAuto Setup.

3 Set up the remote control unit

n Set up the operation modePress AMP to set the remote control unit to amplieroperation mode.

Press AMP

1 Prepare the setup microphoneMount the setup microphone on a tripod or stand

and place it in the main listening position.When placing the setup microphone, adjust the height o the

sound receptor to the level o the listeners ear.

Sound receptorSetup

microphone

NOTE Do not hold the setup microphone in your hand during

measurements.

Avoid placing the setup microphone close to a seat back or wall as

sound reections may give inaccurate results.


13/104

9

B

asicversion

Advan

cedversion

Information


Simpleversion


STEP1

Preparation

In STEP 2, you will perorm measurements at

multiple positions (two to six positions) other than

the main listening position.

You can achieve a more eective correction o

distortion within the listening area by perorming

measurements at multiple positions.

9Move the setup microphone to position

2, use ui to select Measure, and

then press ENTER.The measurement o the second position

starts. Measurements can be made in up to

six positions.

[3/6]STEP3 Measurement

Please place the mic-

rophone at ear height

at 2nd listening

position.

Start next measurement. Test Tone will start

AUTO SETUP

AUDYSSEY AUTO SETUP

ENTER Enter RETURN Cancel

Measure

Next Calculation

MultEQ

I you want to omit measurements rom the next

position onward, select Next 1 Calculation.

(Go to STEP4 Calculation )

10Repeat step 9, measuring positions 3

to 6.When measurement o position 6 is

completed, a Measurements fnished.

message is displayed.

[3/6]STEP3 Measurement

Measurements finished.

Proceed to Step 4 (Analyze)

AUTO SETUP

AUDYSSEY AUTO SETUP


Retry

Next Calculation

MultEQ

NOTEICautionisdisplayed:Go to Error messages (vpage 11), check

any related items, and perorm the necessary

procedures.I the problem is resolved, return and restart

Audyssey Auto Setup.

When performing Audyssey AutoSetup over againPressui to select Retry, and then press ENTER.

When measuring has stoppedPress RETURN, to the Cancel Auto Setup?prompt is displayed.

Press o to select Yes, then press ENTER.

Setting up the speakers againRepeat the operation rom step 4 o

STEP1 Preparation .

STEP2

Speaker DetectionSTEP3

Measurement

In STEP 2, you will perorm measurements at the

main listening position.

This step automatically checks the speaker

confguration and speaker size, and calculates the

channel level, distance, and crossover requency.

It also corrects distortion in the listening area.

6Select Measure and then press

ENTER.When measuring begins, a test tone is

output rom each speaker.

Measurement requires several minutes.

7The detected speakers are displayed.

[2/6]STEP2 Spkr Detect Check

Go to Step 3 (Measurement) after speaker check

Retry

Next Measurement

Front

Center

Subwoofer

Surround

S.Back

Yes

Yes

Yes

Yes

2spkrs

AUTO SETUP

AUDYSSEY AUTO SETUP


MultEQ

NOTEI a connected speaker is not displayed, the

speaker may not be connected correctly. Check

the speaker connection.

8Use ui to select Next 1Measurement and then press ENTER.

4Connect the setup microphone to the

SETUP MIC jack of this unit.

[1/6]STEP1 PreparationConnect the speakersand place them accord-ing to the recommenda-tions in the manual.

Set the followingitems if necessary.

Start Auto Setup

Amp AssignChannel SelectAuto Setup Start

AUTO SETUPAUDYSSEY AUTO SETUP MultEQ


When the setup microphone is

connected, the ollowing screen is

displayed.

This screen provides the method or setting

up 7.1-channel playback using surround back

speakers. For the method o setting up speakers

other than the 7.1-channel system, select Amp

Assign and perorm step 3 and 4 o Set up

Amp Assign (vpage 39).

I unused channels are set with Channel

Select, measuring time can be shortened. For

setting, perorm steps 5 to 9 o Set up Channel

Select (vpage 39).

5Use ui to select Auto Setup Startand then press ENTER.

Remotecontroloperationbuttons

Move the cursor

(Up/Down/Let/Right)Confrm the setting Return to previous menu


14/104

10


12Use ui to select the item you wantto check, and then press ENTER.

[5/6]STEP5 CheckCheck processing res-ults. To proceed,pressNext

Select item to check

Spkr Config CheckDistance CheckCh. Level CheckCrossover Check

Next Store

AUTO SETUPAUDYSSEY AUTO SETUP


MultEQ

Subwooers may measure a greater reported

distance than the actual distance due to added

electrical delay common in subwooers.

I you want to check another item, press

RETURN.

13Use ui to select Next 1 Storeand then press ENTER.


STEP4

CalculationSTEP5

Check

14Select Store and then press ENTER.Save the measurement results.

[6/6]

AUTO SETUP

AUDYSSEY AUTO SETUP

STEP6 Store

Now storing...

Please wait.

25%

MultEQ

[6/6]STEP6 Store

Press Store to store

calculation results.

Apply and store measurement result

Store

AUTO SETUP

AUDYSSEY AUTO SETUP


MultEQ

Saving the results requires about 10 seconds.

I the measuring results are not to be saved,

press RETURN. A message Cancel AutoSetup? will be displayed. Press o then selectYes. All the measured Audyssey Auto Setup

data will be erased.

NOTEDuring saving o measurement results, be sure

not to turn o the power.

15Unplug the setup microphone from

the units SETUP MIC jack.

16

Set Dynamic Volume.

[6/6]FinishStoring complete.Auto Setup is nowfinished. Please unplugmicrophone.

Turn on Dynamic Volume?


ENTER Exit

Turn Dynamic Volume on and exit Auto Setup

Yes No

MultEQ

For details o Dynamic Volume sett ings, see

page 58.

n When turning Dynamic Volume onUse o to select Yes, and then press ENTER.

The unit automatically enters Evening mode.

n When turning Dynamic Volume offUse p to select No, and then press ENTER.

NOTEAter perorming Audyssey Auto Setup, do not

change the speaker connections or subwooer

volume. In event o a change, perorm Audyssey

Auto Setup again.

NOTE I the result diers rom the actual connection

status, or i Caution! is displayed, see Error

messages (vpage 11). Then carry out Audyssey

Auto Setup again.

I the result still diers rom the actual connection

status ater remeasurement or the error message

still appears, it is possible that the speakers

are not connected properly. Turn this unit o,

check the speaker connections and repeat the

measurement process rom the beginning.

I you change speaker positions or orientati on,

perorm Audyssey Auto Setup again to fnd the

optimal equalizer settings.

11On the STEP3 screen, use uito select Next 1 Calculation, andthen press ENTER.

Measuring results are analyzed, and therequency response o each speaker in the

listening room is determined.

[4/6]

AUTO SETUP

AUDYSSEY AUTO SETUP

STEP4 Calculation

Now calculating...

Please wait.

25%

MultEQ

Analysis takes several minutes to complete. The

time required or this analysis depends on thenumber o speakers connected.

The more connected speakers there are, the

longer it takes to perorm analysis.

STEP6

Store Finish


Move the cursor



15/104

11

B

asicversion

Advan

cedversion

Information


Simpleversion

Parameter CheckThis unction enables you to check the measurement results and

equalizer characteristics ater Audyssey Auto Setup.

1Use ui to select Parameter Check and thenpress ENTER or p.

2Use ui to select the item you want to check, thenpress ENTER or p.

Measurement results or each speaker are displayed.

Speaker Config CheckDistance CheckChannel Level CheckCrossover CheckEQ Check

Restore

AUTO SETUPPARAMETER CHECK

Show speaker configuration result

Speaker Cong. Check

Distance Check

Channel Level Check

Crossover Check

EQ Check

Check the speaker confguration.

Check the distance.

Check the channel level.

Check the crossover requency.

Check the equalizer.

I EQ Check is selected in step 2, press ui to select equalizingcurve (Audyssey or Audyssey Flat) to be checked.

Use op to switch the display between the dierent speakers.

3Press RETURN.The confrmation screen reappears. Repeat steps 2.

Retrieving Audyssey Auto Setup settingsI you set Restore to Yes, you can return to Audyssey Auto Setup

measurement result (value calculated at the start by MultEQ) even

when you have changed each setting manually.

Error messagesAn error message is displayed i Audyssey Auto Setup could not be completed due to speaker placement, the measurement environment, etc.

I this happens, check the relevant items, be sure to take the necessary measures, then perorm Audyssey Auto Setup over again.

NOTEBe sure to turn o the power beore checking speaker connections.

Examples Errordetails Measures

Caution!

No microphone or Speaker

Retry

Check cause of problem!

AUTO SETUP

AUDYSSEY AUTO SETUP

RETURN Cancel

MultEQ

The connected setup microphone is broken,

or adevice other than the supplied setupmicrophone is connected.

Not all speakers could be detected.

The ront L speaker was not properly

detected.

Connect the included setup microphone to

the SETUP MIC jack o this unit.

Check the speaker connections.

Caution!Ambient noise is too highor Level is too low

Retry



RETURN Cancel

MultEQ

There is too much noise in the room or

accurate measurements to be made.

Speaker or subwooer sound is too low or

accurate measurements to be made.

Either turn o any device generating noise

or move it away.

Perorm again when the surroundings are

quieter.

Check the speaker installation and the

direction in which the speakers are acing.

Adjust the subwooers volume.

Caution!


Retry

Front R None

AUTO SETUP

AUDYSSEY AUTO SETUP

RETURN Cancel

MultEQ

The displayed speaker could not be detected. Check the connections o the displayed

speaker.

Caution!


Retry

Skip

Front L Phase


RETURN Cancel

MultEQ The displayed is connected with thepolarities reversed. Check the polarities o the displayedspeaker.

For some speakers, this error message may

be displayed even i the speaker is properly

connected. I you are sure the connection is

correct, press ui to select Skip, thenpress ENTER.


Move the cursor




16/104

12


Play back disc 1 2 3 4 55

1Press BD two times in a rowto switch an input source for a

player used for playback.

2Play the component connected to

this unit.

Make the necessary settings on theplayer (language setting, subtitles

setting, etc.) beorehand.

3Adjust the sound volume.

VOLUME + ..................................... Volume up

VOLUME ................................ Volume down

MUTE.................................................. Muting

4Set the listening mode.Set the listening mode according to the playback contents

(cinema, music, etc.) or according to your liking (vpage 31Selecting a listening mode (Surround mode)).

When power is switched to standbyPress STANDBY.

GPowerindicatorstatusinstandbymodeH Normal standby : Red

When HDMI Control is set to ON :

Orange

You can also switch the power to standby by

pressing ON/STANDBY on the main unit.

NOTEDuring power standby, a minimal amount o power is consumed. To

totally cut o the power, remove the power cord rom the power

outlet.



17/104

Basicversion

13

Advancedversion

Information


B

asicversion

Simpleversion

F Connections vpage 14

F Playback (Basic operation) vpage 23

F Selecting a listening mode (Surround mode) vpage 31

n Refer to the pages indicated below for information on connecting and playing back the various

media and external devices.

AudioandVideo PlaybackConnection

TV vpage 16,17

Blu-rayDiscplayer vpage 16,17 vpage 24

DVDplayer vpage 16,17 vpage 24

Videocassetterecorder vpage 16,19

Set-topbox(SatellitetunerorcableTV) vpage 16,18

Gameconsole vpage 16

Digitalcamcorder vpage 19

Audio PlaybackConnection

iPod vpage 19 vpage 26

USBmemorydevice vpage 19 vpage 24

CDplayer vpage 20 vpage 24

SIRIUSsatelliteradio vpage 20 vpage 27

HDRadioreceiver vpage 21 vpage 29

Wirelessreceiver(RX101) vpage 21

Forspeakerconnections,seepage5.

Basic versionHere,weexplaintheconnectionsandbasicoperationmethodsorthisunit.



18/104

14


Important information Makeconnectionsasfollowsbeforeusingthisunit.Selectanappropriateconnectiontypeaccording

tothecomponentstobeconnected. Youmayneedtomakesomesettingsonthisunitdependingontheconnectionmethod.Reerto

eachdescriptionormoreinormation. Selectthecables(soldseparately)accordingtothecomponentsbeingconnected.

NOTE Do not plug in the power cord until all connections have been completed.

When making connections, also reer to the operating instructions o the other components being connected. Be sure to connect the let and right channels properly (let with let, right with right).

Do not bundle power cords together with connection cables. Doing so can result in noise.

Converting input video signals for output (Video conversion function)

This unit is equipped with three types o video input connectors (HDMI, Component video and video) and

three types o video output connectors (HDMI, Component video and video).

Use the connectors corresponding to the components to be connected.

This unction automatically converts va rious ormats o video signals input to this unit into the ormats used

to output the video signals rom this unit to a monitor.

GFlowovideosignalsorMAINZONEH

HDMI connector

Component video

connectors

Video connector

Monitor

HDMI connector

Component video

connectors

Component video

connectors

Component video

connectors

Video connector

HDMI connector

Video connector

HDMI connector

Video connector

Video device

This unit

OutputInput(IN)

Output(MONITOROUT) Input

Connections

Set when not using the video conversion unction.

VideoConvert (vpage 54) Set when changing the resolution o the video signal.

Resolution (vpage 54)

inSetasNecessary

The video conversion unction supports the NTSC, PAL, SECAM, NTSC 4.43, PAL-N, PAL-M and PAL-60

ormats.

The resolution o the video signal input to this units HDMI connector is the one set at Resolution

(vpage 54). (1080p HDMI signals and 1080p component signals are output at 1080p, regardless o the

setting.)

Resolutions o HDMI-compatible TVs can be checked at HDMI Monitor Inormation (vpage 68).

NOTE HDMI signals cannot be converted into analog signals.

When a non-standard video signal rom a game machine or some other source is input, the video

conversion unction might not operate.

Component video input signals cannot be converted into Video ormat.

A menu is output via the HDMI connector or component video connector.

Examples of screen display

Menu screen Status display screen

When the input source is

switched

When the volume is adjusted

Adjust various audio and video parameters

Audio/Video AdjustInformation

Auto SetupManual Setup

Input Setup

MENU

Input Auto

STEREO

BD

Mode

Master Volume -80.0dB

Status display: The operating sta tus appears br iey on the screenwhen the input source is switched or the volume is

changed.

NOTE I you operate the menu while playing back 3D vi deo content, the playback video is replaced by the menu

screen. The playback video is not displayed behind the menu screen.

This unit does not show the status display while playing back 3D video content.



19/104

15

Simpleversion

Advancedversion

Information


B

asicversion

Connecting an HDMI-compatible deviceYou can connect up to six HDMI-compatible devices to the unit.

HDMI functionThis unit supports the ollowing HDMI unctions:

3D

Deep Color (vpage 88)

Auto Lip Sync (vpage 64, 88) x.v.Color, sYCC601 color, Adobe RGB color, Adobe YCC601 color (vpage 88, 89)

High defnition digital audio ormat

ARC (Audio Return Channel) Content Type

CEC (HDMI control)

Copyrightprotectionsystem

In order to play back digital video and audio such as BD-Video or DVD-Video via HDMI connection, both

this unit and TV or the player need to support the copyright protection system known as HDCP (High-

bandwidth Digital Content Protection System). HDCP is copyright protection technology comprised o

data encryption and authentication o the connected AV device. This unit supports HDCP.

I a device that does not support HDCP is connected, video and audio are not output correctly. Read

the user guide o your television or player or more inormation.

About HDMI cables When a device supporting Deep Color signal transer is connected, use a cable compatible High Speed

HDMI cable or High Speed HDMI cable with Ethernet. When the ARC unction is used, connect a device with a Standard HDMI cable with Ethernet or High

Speed HDMI cable with Ethernet or HDMI 1.4a.

HDMI control function (vpage 42)This unction allows you to operate external devices rom the receiver and operate the receiver rom

external devices.

NOTE The HDMI control unction may not work depending on the device it is connected to and its settings.

You cannot operate a TV or Blu-ray Disc player/DVD player that is not compatible with the HDMI control

unction.

About 3D functionThis unit supports input and output o 3D (3 dimensional) video signals o the HDMI 1.4a standards.

For playing the 3D video content, a player, and a TV that support the 3D unction o the HDMI 1.4a

standards are required in addition to this unit.

NOTE I you operate the menu while playing back 3D vi deo content, the playback video is replaced by the menu

screen. The playback video is not displayed behind the menu screen.

This unit does not show the status display while playing back 3D video content.

About ARC (Audio Return Channel) functionThe Audio Return Channel in HDMI 1.4a enables a TV, via a single HDMI cable, to send audio data upstream

to this unit.

NOTE To enable the ARC unction, set HDMI Control to ON (vpage 64).

When connecting a TV that does not support the ARC unction, a separate connection using an audio

cable is required. In this case, reer to Connecting a TV (vpage 17) or the connection method.

About Content TypeThe HDMI specifcation version 1.4a enables simple, automated picture setting selection with no user

intervention.

NOTETo enable the Content Type, set Video Mode to Auto (vpage 54).



20/104

16


Connecting to a device equipped with a DVI-D connectorWhen an HDMI/DVI conversion cable (sold separately) is used, the HDMI video signals are converted to

DVI signals, allowing connection to a device equipped with a DVI-D connector.

NOTE No sound is output when connected to a device equipped with a DVI-D connector. Make separate audio

connections.

Signals cannot be output to DVI-D devices that do not support HDCP.

Depending on the combination o devices, the video signals may not be output.

n Settings related to HDMI connectionsSet as necessary. For details, see the respective reerence pages.

Input Assign (vpage 52)Set this to change the HDMI input connector to which the input source is assigned.

HDMI Setup (vpage 64)Make settings or HDMI video/audio output.

RGB Range Auto Lip Sync HDMI Audio Out

HDMI Control Standby Source Power O Control

NOTEThe audio signals output rom the HDMI connectors are only the HDMI input signals.

Connecting an HDMI-compatible device

Cables used for connections

Audioandvideocable(soldseparately)

HDMI cable

This interace allows transer o digital video signals and digital audio signals over a single HDMI cable.

OUT

HDMI

OUT

HDMI

OUT

HDMI

OUT

HDMI

OUT

HDMI

OUT

HDMI

IN

HDMI

Blu-rayDisc

playerDVD

player TVSet-top

box

Videocassetterecorder

Gameconsole

Digitalcamcorder

When this unit is connected to other devices with HDMI cables, connect this unit and TV also with an

HDMI cable.

When connecting a device that supports Deep Color transmission, please use a High Speed HDMI

cable or High Speed HDMI cable with Ethernet.

Video signals are not output i the input video signals do not match the monitors resolution. In this case,

switch the Blu-ray Disc/DVD players resolution to a resolution with which the monitor is compatible.

When this unit and monitor are connected with an HDMI cable, i the monitor is not compatible with

HDMI audio signal playback, only the video signals are output to the monitor.

NOTE

The audio signal rom the HDMI output connector (sampling requency, number o channels, etc.) may belimited by the HDMI audio specifcations o the connected device regarding permissible inputs.


21/104



22/104

18


Connecting a set-top box (Satellite tuner/cable TV) You can watch satellite or cable TV.

Select the connector to use and connect the device.

For instructions on HDMI connections, see Connecting an HDMI-compatible device (vpage 15).

Cables used for connectionsVideocable(soldseparately)

Video cable (Yellow)

Componentvideo cable

Y

PB

PR

Y

PB

PR

(Green)

(Blue)

(Red)

Audiocables(soldseparately)

Audio cable(White)

(Red) R

L

R

L

Coaxial

digital cable(Black)

RL

RL

VIDEO AUDIO

AUDIO

RL

OUTOUT

VIDEOCOMPONENT VIDEO

Y PB PR

OUT OUT

COAXIAL

Satellitetuner/CableTV

Set this to change the digital input connector or component video input connector to which the input

source is assigned.

InputAssign (vpage 52)

inSetasNecessary

Connecting a video cassette recorder You can record video onto a video cassette tape. Select the connector to use and connect the device. When recording analog audio, use the analog connection. For instructions on HDMI connections, see Connecting an HDMI-compatible device (vpage 15).



Audiocable(soldseparately)

Audio cable(White)

(Red) R

L

R

L

RL

RL

RL

RL

RL RL

OUT IN

AUDIOAUDIO VIDEOVIDEO

IN

AUDIOAUDIO

OUT

VIDEO VIDEO

Videocassetterecorder

Set this to change the digital input connector or component video input connector to which the input

source is assigned.


inSetasNecessary

NOTETo record video signals through this unit, use the same type o video cable or connection between this

unit and the player as used or connection between this unit and the recorder.



23/104

19

Simpleversion

Advancedversion

Information


Basicversion

Connecting a digital camcorder You can enjoy video and audio rom a digital camcorder.

You can enjoy games by connecting a game machine via the AUX1

input connector. In this case, select the input source to AUX1.

For instructions on HDMI connections, see Connecting an HDMI-

compatible device (vpage 15).




Audio cable(White)

(Red) R

L

R

L

Optical cable

RL

RL

OUT

VIDEO

VIDEO

RL

AUDIO

OUT

OPTICAL

OUT

AUDIO

Digitalcamcorder

Set this to change the digital input connector to which the input

source is assigned.


inSetasNecessary

The ront panel OPTICAL input terminal is displayed as OPT3 in the

Input Setup Input Assign setting (vpage 52) in the menu.

NOTEWhen a non-standard video signal rom a game machine or some other

source is input, the video conversion unction might not operate. In

this case, use the monitor output o the same connector as the input.

Supported iPod modelsMade or

iPod touch (2nd generation)

iPod touch (1st generation)

iPod classic

iPod with video

iPod nano (5th generation)

iPod nano (4th generation)

iPod nano (3rd generation)

iPod nano (2nd generation) iPod nano (1st generation)

iPhone

iPhone 3G

iPhone 3GS

Connecting an iPod or USB memory device to the USB portYou can enjoy music stored on an iPod or USB memory device.

Cables used for connectionsTo connect an iPod to this unit, use the USB cable supplied with the

iPod.

USBmemorydevice

iPod

or

Marantz does not guarantee that all USB memory devices will operate

or receive power. When using a portable USB connection type HDDo the kind to which an AC adapter can be connected to supply power,

use the AC adapter.

NOTE USB memory devices will not work via a USB hub.

Do not use an extension cable when connecting a USB memory

device. This may cause radio intererence with other devices.



24/104

20


Connecting a CD player You can enjoy CD sound.

Select the connector to use and connect the device.



Audio cable(White)

(Red) R

L

R

L

Optical cable

RL

RL

RL

OUT

AUDIO

OUT

OPTICALAUDIO

CDplayer

Set this to change the digital input connector to which the input

source is assigned.


inSetasNecessary

Connecting an antenna

Connecting a SIRIUS connector This unit is a SIRIUS Satelli te Radio Ready receiver. You can

receive SIRIUS Satellite Radio by connecting to the SiriusConnect

Home Tuner and subscribing to the SIRIUS service.

Plug the SIRIUS connector on the SIRIUS service.

Position the Home Tuner antenna near a south-acing window to

receive the best signal.

For details, see Listening to SIRIUS satellite radio (vpage 27).When making connections, also reer to the operating instructions

o the SiriusConnect Home Tuner.

SiriusConnectHomeTuner

When

connecting

digital audio

When connecting digital o the SiriusConnect Home Tuner,

perorm the setting Digital.


inSetasNecessary

NOTEKeep the power cord unplugged until the Sir iusConnect Home Tuner

connection have been completed.

n Positioning the antennaFor a consistent satellite signal, the antenna must be positioned

correctly. Use the ollowing map to determine which area you are

in and position the antenna accordingly.

q

w e

rt

SOUTH

NORTH

WEST

SKY

EAST

HORIZON

Area1 Point the antenna toward the sky in the east, northeast, orsoutheast, either through a window or outside.

Area2 Point the antenna toward the sky in the north or northeast,either through a window or outside.

Area3 Point the antenna toward the sky in the north or northwest,either through a window or outside.

Area4 Point the antenna toward the sky in the west, northwest, orsouthwest, either through a window or outside.

Area5 Put the antenna outside and point it straightup. The antennacannot be used indoors.



25/104

21

Simpleversion

Advancedversion

Information

Basicversion

Connecting a wireless receiver(RX101)

By connecting a wireless receiver RX101 (sold separately) to this unit,

you can receive and playback audio signals rom other devices using

the Bluetooth Communication Function.

Use a Bluetooth device that is A2DP compatible (vpage 88

A2DP).

You can also use wireless receiver RX101 as an external IR receiver.

For instructions on the wireless receiver settings, reer to the

RX101s operating instructions.

Wireless receiver RX101

Bluetooth device(A2DP Compatibility)

Remote control unit

You can enjoy listening to music by connecting a wireless receiver

via the M-XPort input connector. In this case, set the input source to

M-XPort.

NOTETo use wireless receiver RX101 as external IR receiver, set the

remote sensor unction o this unit to Remote Lock:ON (vpage 68

Remote control settings).

Connecting an HD Radio receiver By connecting a HD Radio antenna to this unit, you can receive HD

Radio programs.

HD Radio broadcasting currentry is available in the United States and

select other countries.

w eq

FM outdoor

antenna

Direction o broadcasting station

75 coaxial

cable

GroundAM outdoor

antenna

AM loop antenna

(or HD Radio broadcasting, supplied)

To prevent intererence, install

at least 3.3 t/1 m away rom the

antenna connected to the this unitsother AM tuner terminal.

Black

White

FM indoor

antenna

(or HD Radio

broadcasting,

supplied)

n AM loop antenna assembly

1Put the stand section

through the bottom of the

loop antenna from the

rear and bend it forward.

Stand

Square

hole

Projecting

part

Loop

antenna

2Insert the projecting part

into the square hole in

the stand.

n Using the AM loop antenna

Suspending on a wallSuspend directly on a wall without assembli ng.

Nail, tack, etc.

Standing aloneUse the procedure shown top to assemble.

NOTE Do not connect two FM antennas simultaneously.

Even i an external AM antenna is used, do not disconnect the AM

loop antenna.

Make sure the AM loop antenna lead terminals do not touch metal

parts o the panel.

I the signal has noise intererence, connect the ground termi nal

(GND) to reduce noise.

I you are unable to receive a good broadcast signal, we recommend

installing an outdoor antenna. For details, inquire at the retail store

where you purchased the unit.

Connecting an antenna



26/104

22

Connecting a external power amplier You can use this unit as a pre-amp by connecting a commercially available power amp to the PRE OUT

connector. Adding a power amp to each o the channels provides an even greater sound presence.

Select the terminal to use and connect the device.



Audio cable(White)

(Red) R

L

R

L

Audio cable

RL

RL

RL

RL

RL

RL

SUB-

WOOFER

CENTER SURROUND

BACK

RL

SURROUND

RL

FRONT

RL

AUDIO

Poweramplifer

When using just one surround back speaker, connect it to the let channel (L) terminal.

Use the volume control on the subwooer to control subwooer volume.

I the subwooer volume sounds low, use the volume control provided on the subwooer to adjust thevolume.

NOTE When an external power amp is connected to the PRE OUT terminal, do not connect speakers to the

speaker terminals.

Depending on the settings in the Amp Assign (vpage 61) menu or listening mode, the channel output

rom the SBL terminal or SBR terminal o the PRE OUT terminal diers.

Connect a device that has a multichannel output terminal You can connect this unit to an external device ftted with multi-channel sound audio output jacks to enjoy

music and video.

The video signal can be connected in the same way as a Blu-ray Disc player / DVD player (vpage 17

Connecting a Blu-ray Disc player / DVD player).



Audio cable(White)

(Red) R

L

R

L

Audio cable

RL

RL

RL

RL

RL

RL

SUB-

WOOFER

CENTER SURROUND

BACK

RL

SURROUND

RL

FRONT

RL

AUDIO

Blu-rayDiscplayer/DVDplayer/Externaldecoder

When a device is connected to the SBL/SBR

terminal o 7.1CH INPUT terminals, set Amp

Assign (vpage 61) to Normal.

To play analog signals input rom 7.1CH INPUT

terminals, set Input Mode (vpage 55) to

7.1CH IN.

7.1CH IN can also be selected with A/D onthe remote control unit.

inSetasNecessary



27/104

23

Simpleversion

Advanc

edversion

Information

Basicversion

Playback (Basic operation)

n Playing a Blu-ray Disc player/DVD player

(vpage 24)n Playing a CD player (vpage 24)

n Playing a USB memory device (vpage 24)

n Playing an iPod(vpage 26)

n Tuning in radio stations (vpage 27)

Selecting a listening mode (Surround mode)(vpage 31)

n Selecting the input source (vpage 23)

n Adjusting the master volume (vpage 24)

n Turning off the sound temporarily (vpage 24)

Playback (Advanced operation) (vpage 42)

Important informationBeore starting playback, make the connections between the dierent

components and the settings on the receiver.

NOTEAlso reer to the operating instructions o the connected components

when playing them.

Selecting the input sourcePress the input source select button

(BD, DVD, VCR, SAT, GAME, AUX1,NET/USB, TV, CD, SATR, TUNE,M-XP) twice to play back that source.The desired input source can be selected

directly.

You can also use the ollowing operation toselect aninputsource.

n Using the Source Select menuq Press AMP and the press SOURCE SEL.

Display the Source Select menu.

Source Select :SAT/CBL

Recent Source

Enter

Select

ENTER

Thecurrently selectedinputsourceishighlighted.q

w

e

q InputSourceThe name o the highlighted input source is displayed.

w RecentlyusedsourcesThe recently used input sources (up to fve) are displayed.

e Iconsortheinputsourcesinthedierentcategoriesaredisplayed.

w Use uiop to select the input source,then press ENTER.The input source is set and the source

selection menu is turned o.

When using with an iPod connected directly to the USB port o this

unit, select (USB/iPod) or the input source.

Input sources that are not going to be used can be set ahead o time.Make this setting at Source Delete (vpage 66).

To turn o the source selection menu without selecting an input

source, press SOURCE SEL again.

n Using the button on the remote control unitPress INPUT df. When INPUT df is pressed, the input

source is switched in the order shown

below.

BD DVD VCR SAT AUX1GAME USB/iPod

M-XPort SIRIUS AUX2 CD TVHD Radio

n Using the knob on the main unitTurn INPUT SELECTOR. Turning INPUT SELECTOR switches

the input source, as shown below.

BD DVD VCR SAT AUX1GAME USB/iPod

M-XPort SIRIUS AUX2 CD TVHD Radio

Set the front speakers to be used

Press SPKR A/B.

Each time you press SPKR A/B, the rontspeaker setting will change as ollows.

Front A Front A+BFront B



28/104

24

Adjusting the master volume

Use VOLUME +, to adjust the volume.

n When the Volume Display setting(vpage 66) is RelativeGAdjustablerangeH

80.5dB 18.0dB

n When the Volume Display setting (vpage 66) isAbsoluteGAdjustablerangeH 0.0 99.0

The adjustable range may vary depending on input si gnal and

channel level settings.

You can also operate via the main unit.

In this case, perorm the ollowing

operations.

Turn VOLUME to adjust the volume.

Turning off the sound temporarily

Press MUTE.

The sound is reduced to the level set at Mute Level (vpage 66). To cancel , press MUTE again. Muting can also be canceled by

adjusting the master volume.

Important informationPlaying a Blu-ray Disc player/DVDplayer

The ollowing describes the procedure or playing Blu-ray Disc player/

DVD player.

1Prepare for playback.q Turn on the power o the TV,

subwooer and player.

w Change the TV input to the input othis unit.

e Load the disc in the player.

2Press ON to turn on power to theunit.

3Press BD or DVD twice to switchthe input source for the player

used for playback.

4Play the component connected to this unit.Make the necessary settings on the player (language setting,

subtitles setting, etc.) beorehand.

Playing a CD playerThe ollowing describes the procedure or playing CD player.

1Prepare for playback.q Turn on the power o the subwooer

and player.

w Load the disc in the player.


3Press CD twice to switch the inputsource to the CD player.

4Play the component connected to

this unit.

Playing a USB memory devicePlaying back music fles recorded on a USB memory device.

Important information

n USB memory devicesA USB memory device can be connected to the USB port o this

unit to play music fles stored on the USB memory device.

Only USB memory devices conorming to mass storage cl ass can

be played on this unit.

This unit is compatible with USB memory devices in FAT16 orFAT32 ormat.

GCompatibleormatsH

USB memory devices z1

WMA (Windows Media Audio) Pz2

MP3 (MPEG-1 Audio Layer-3) P

MPEG-4AAC Pz3

WAV P

z1 USB

This unit is compatible with MP3 ID3-Tag (Ver. 2) standards.

This unit is compatible with WMA META tags.

z2 Copyright-protected fles can not be played.z3 Only fles that are not protected by copyright can be played on

this unit.Also, fles encoded in WMA ormat when ripped rom a CD, etc.

on a computer may be copyright protected, depending on the

computers settings.

GCompatibleormatsH

Samplingrequency

Bitrateor

BitlengthExtension

WMA (WindowsMedia Audio)

32/44.1/48 kHz 48 192 kbps .wma

MP3 (MPEG-1Audio Layer-3)

32/44.1/48 kHz 32 320 kbps .mp3

MPEG-4AAC 32/44.1/48 kHz 16 320 kbps .m4a

WAV 32/44.1/48 kHz 16 bit .wav



29/104

25

Simpleversion

Advanc

edversion

Information

Ba

sicversion

Playing a USB memory device

Playing les stored on USB memory devices

1Connect the USB memory device to the USB port

(vpage 19 Connecting an iPod or USB memorydevice to the USB port).

2Press NET/USB twice to switch the input source toUSB/iPod.

3Press ui to select the searchitem or folder, then press ENTERor p.

4Press ui to select the le, thenpress ENTER, p or 1.Playback starts.

You can speciy the duration o the on-sc reen display to be displayed

(deault: 30 sec) at menu USB/iPod (vpage 66). Press uiopto return to the original screen.

To play back compressed audio with extended bass or treble

reproduction, we recommend playback in M-DAX mode (vpage 59).

The deault setting is OFF.

I the USB memory device is divided into multiple partitions, only the

top partition can be selected.

This unit is compatible with MP3 fles conorming to MPEG-1 Audio

Layer-3 standards.

NOTE Note that Marantz will accept no responsibility whatsoever or any

problems arising with the data on a USB memory device when using

this unit in conjunction with the USB memory device.

USB memory devices will not work via a USB hub.

Marantz does not guarantee that all USB memory devices will

operate or be supplied power. When using a USB portable hard disk

that can draw power rom an AC adapter, we recommend using the

AC adapter.

It is not possible to connect and use a computer via the USB port o

this unit using a USB cable.

n USB operation

Operation buttons Function

PRESET +, Preset channel selection

uiopCursor operation /

Auto search (cue, ui)

ENTER

(Press and release)Enter / Pause

ENTER

(Press and hold)Stop

SEARCH Page searchz1/ Character searchz2

RETURN Return

1 Playback / Pause

8 9 Auto search (cue)

3 Pause

2 Stop

1 8 Preset channel selection

SHIFT Preset channel block selection

REPEAT Repeat playback

RANDOM Random (Shufe) playback

TV POWERTV power on/standby

(Default : Marantz)

TV INPUT Switch TV input(Default : Marantz)

z1 When the menu screen is displayed, pressSEARCH/INFO, then press o (previous page) orp (next page).To cancel, press ui or SEARCH/INFO twice.

z2 When the menu screen is displayed, pressSEARCH/INFO twice, then press op to selectthe frst letter you want to search mode.

I it is not possible to search the list, unsorted

list. is displayed.

To cancel, press ui or SEARCH/INFO.

Repeat playback and shue playback can also be set rom Input

Setup Playback Mode (vpage 55) in the menu.

I the list is not in alphabetical order, you may not be able to perorm

a character search.



30/104

26

Playing an iPodYou can play back audio only.

1Connect the iPod to the USB

port (vpage 19 Connecting aniPod or USB memory device to

the USB port).


3Press NET/USB twice to switchthe input source to USB/iPod.

NOTEI the connections screen is not displayed,

the iPod may not be properly connected.

Reconnect it.

4Press SEARCH/INFO and hold it down for 2 secondsor more to select the display mode.

There are two modes or displaying the contents recorded on the

iPod.

Remote mode Display iPod inormation on the TV screen.

The unit display shows single-byte

alphanumeric characters and some

symbols only. . is displayed in place

o incompatible characters.

In Remote mode, the iPod display is

as shown at right. OK to disconnect.

Direct mode Display iPod inormation on the iPod screen. Direct iPod is displayed on the display o this unit.

Displaymode Remote mode Direct mode

Playablefles

Musicfle P P

Videofle z

Activebuttons

Remotecontrolunit(Thisunit)

P P

iPod P

zOnly the sound is played.

5Use ui to select the item, then press ENTER or pto select the le to be played.

6Press ENTER, p or 1.Playback starts.


(deault: 30 sec) at menu USB/iPod (vpage 66). Press uiopto return to the original screen.

To play back compressed audio with extended bass or treble

reproduction, we recommend playback in M-DAX mode (vpage 59).The deault setting is OFF. In Remote mode, press STATUS during playback

to check the title name, artist name, and album

name.

NOTE Depending on the type o i Pod and the sotware version, some

unctions may not operate.

Note that Marantz will accept no responsibility whatsoever or any

problems arising with the data on an iPod when using this unit inconjunction with the iPod.

n iPod operation

Operation buttons Function

uiopCursor operation /

Auto search (cue, ui) /Manual search (Press and hold, ui)

ENTER

(Press and release)Enter / Pause

ENTER

(Press and hold)Stop

SEARCH

(Press and release)Page searchz1/ Character searchz2

SEARCH

(Press and hold)Remote / Direct mode switching

RETURN Return

6 7

(Press and hold)

Manual search

(fast-reverse/fast-forward)

1 Playback / Pause

8 9 Auto search (cue)

3 Pause

2 Stop

REPEAT Repeat playback

RANDOM Random (Shufe) playback

TV POWERTV power on/standby

(Default : Marantz)

TV INPUTSwitch TV input

(Default : Marantz)

z1 When the menu screen is displayed, pressSEARCH/INFO, then press o (previous page) orp (next page).

To cancel, press ui or SEARCH/INFO twice.z2 When the menu screen is displayed, press

SEARCH/INFO twice, then press op to selectthe frst letter you want to search mode.

I it is not possible to search the list, unsorted

list. is displayed.

To cancel, press ui or SEARCH/INFO.

Repeat playback and shue playback can also be set rom Input

Setup Playback Mode (vpage 55) in the menu. I the list is not in alphabetical order, you may not be able to perorm

a character search.



31/104

27

Simpleversion

Advanc

edversion

Information

Ba

sicversion

Tuning in radio stations

Important information

nAbout SIRIUS XM radioTo listen to Satellite Radio, youll need to connect either a SIRIUS

or XM Satellite Radio tuner (sold separately) to your satellite-ready

receiver. Satellite Radio is available to residents o the US (except

Alaska and Hawaii) and Canada.

Satellite Radio delivers a variety o commercial-ree music rom

categories ranging rom Pop, Rock, Country, R&B, Dance, Jazz,Classical and many more plus coverage o all the top proessional

and college sports including play by play games rom select

leagues and teams. Additional programming includes expert sports

talk, uncensored entertainment, comedy, amily programming,

local trafc and weather and news rom your most trusted sources.

Whether you purchase a SIRIUS or XM tuner, youll need to

activate and subscribe to begin enjoying the service. Easy to ollow

installation and setup instructions are provided with the satellite

tuners. Whichever service you choose, there are a variety o

programming packages available, including the option o adding

The Best o SIRIUS programming to your XM tuner or The Best

o XM programming to your SIRIUS tuner, enabling you to enjoy

the most popular programming among both services. The Best

o packages are not available to SIRIUS or XM Canada subscribers

at this time.

Family riendly packages are also available to restrict channels

eaturing content that may be inappropriate or children.

To subscribe to XM, U.S. customers should visit xmradio.com

or call 1-800-XMRADIO (1-800-967-2346); Canadian customers

should visit xmradio.ca or call XM Listener Care at 1-877-GETXMSR

(1-877-438- 9677).

To subscribe to SIRIUS, U.S. and Canadian customers can

call 1-888-539-SIRI (1-888-539-7474) or visit sirius.com (US) or

siriuscanada.ca (Canada).

n SIRIUS XM radio legalSIRIUS, XM and all related marks and logos are trademarks o Sirius

XM Radio Inc. and its subsidiaries. All other marks and logos are the

property o their respective owners. All rights reserved. SIRIUS and

XM subscriptions sold separately. Taxes and a one-time activation

ee may apply. XM tuners and home docks or SIRIUS tuners (each

sold separately) are required to receive the SIRIUS or XM satellite

radio service. All programming and ees subject to change. It is

prohibited to copy, decompile, disassemble, reverse engineer,

hack, manipulate or otherwise make available any technology orsotware incorporated in receivers compatible with the SIRIUS or

XM Satellite Radio Systems. ServicenotavailableinAlaskaandHawaii.

n Using the HD Radio receiverHD Radio stations oer higher sound quality than conventional

FM/ AM broadcasts. It is also possible to receive data services and

select broadcasts rom among up to eight multicast programs.

HD Radio technology provides higher quality sound than

conventional broadcasts and allows reception o data services.

FM sounds as sensational as CDs

AM sounds as rich as analog FM stereo

A variety o data services, i ncluding text-based inormation,

song title, artist name, album name, genre, etc. can be received.

Furthermore, in addition to conventional broadcasts, with HD

Radio broadcasting it is possible to choose rom up to 8 multicast

programs.

For detailed inormation on HD Radio technology, please go to

www. ibiquity.com.

Listening to SIRIUS satellite radio

1Press SATR twice to switch theinput source to SIRIUS.

2Use TUNING + or TUNING toselect the channel.When the channel is tuned in, the name

o the song and artist are displayed.

The channel switches continuously when TUNING + or TUNING ispressed and held.


(deault: 30 sec) at menu TUNER (vpage 67). Press uiop toreturn to the original screen.

The song title, artist name, composer name,

category and reception level can be checked

by pressing STATUS.



32/104

28

n Checking the SIRIUS signal strength and radioID

1Press STATUS until SIGNALappears on the display.The display will switch as shown below,

depending on the reception conditions.

Display StatusEXCELLENT Signal strength is excellentGOOD Signal strength is goodWEAK Signal strength is weakNOSIGNAL No signal

2Adjust the position of the antenna until SIGNAL:

EXCELLENT is shown on the display.

3Press STATUS until the channel (example: SR001)is displayed.

4Press TUNING + or TUNING and select channel 0 (SR000).Channel No. and Sirius ID are alternately

shown on the display.

SR000 SiriusID

************ Sirius ID

Write your own SIRIUS ID or storage use.

Sirius ID :

The strength o both the SIRIUS satellite and terrestrial signals can be

checked Antenna Aiming (vpage 52).

n Presetting radio channels (Preset memory)Your avorite broadcast channels can be preset so that you can

tune them in easily. Up to 56 channels can be preset.

1Tune in the broadcast channel

you want to preset.

2Press MEMORY.

3Press SHIFT to select the block(A to G) in which to preset thechannel (1 to 8 per block), then

press PRESET +, PRESET or 1 8 to select the preset number.

4Press MEMORY again to completethe setting.

To preset other stations, repeat steps 1 to

4.

NOTEPreset channels are erased by overwriting them.

n Listening to preset channels

Press PRESET +, PRESET to selectthe desired preset channel, then press

ENTER.

Preset channels can also be selected by

pressing SHIFT/TOP MENU (Block) and 1 8 (Channel).

n Searching categories

1Press op.

SR001 Hits 1

CAT : Pops Channel category

2Use op to select the category, to use ui to selectthe desired channel.

n Accessing SIRIUS satellite radio channelsdirectly

1Press SEARCH/INFO.

2Press 0 9 to input the channel.Example: Accessing channel SR123:

Press 1, 2 and 3.

I no button is pressed within several

seconds, the channel automatically

switches to the one whose number has

been input.

3Press ENTER to set that channel.Reception switches to the selected

channel.

UPDATING is displayed while the encording code is being

updated.

SIRIUS UPDATING is displayed when updati ng SIRIUS tuner

frmware.

Reer to Troubleshooting SIRIUS Satellite Radio (vpage 91)

regarding other messages.




33/104

29

Simpleversion

Advanc

edversion

Information

Ba

sicversion


n Parental Lock

1Tune to the channel you want to

lock.

2Press ENTER for at least 3seconds.Enter Lock Code is displayed.

Documents

IBJSC.com | I-WEB.com.vn Manual 1041111870