Instructions Check The problem ha 01 = Initial HSDPA configuration 02 = Reconfiguration of HSDPA 0 = P!S" HSPA0# reconfiguration failure FAILED Event type : Quality of service alarm Meaning Thi$ alarm 2 computer unit %here thi$ alarm i$ generate& from in&e' of the alarming unit ( more &etaile& cau$e in ca$e the )TS re*ect$ the configuration 01 = Initial HSDPA configuration 02 = Reconfiguration of HSDPA 0 = P!S" HSPA0# reconfiguration failure "anager main &ialog+ 02, )TS re*ect$ the configuration Check that the concerne& proce&ure b- locking an& unlocking the cell an& %ait for the alarm to be $et again+ Collect the log$ an& monitoring$ an& contact the local .okia Siemen$ .et%ork$ repre$entati/e+
01 = Initial HSDPA configuration 02 = Reconfiguration of HSDPA
03 = PWSM HSPA05 reconfiguration failureFAILED Event type : Quality
of service alarm Meaning This alarm
2 computer unit where this alarm is generated from
3 index of the alarming unit
4 more detailed cause in case the BTS rejects the
configuration
Check that the concerned procedure by locking and unlocking the
cell and wait for the alarm to be set again. Collect the logs and
monitorings and contact the local Nokia Siemens Networks
representative.
Cancelling Do not cancel the alarm. The system cancels the alarm
automaticallywhen the fault has been corrected.
Locking or deleting of the cell, or next succeeded configuration
of HSDPAchannels cancels the alarm.
