Upload
tranbao
View
229
Download
0
Embed Size (px)
Citation preview
2
Double-leaf flush door1R+1R
Double-leaf flush doorG21
Flush door with side panel
Flush door with side panel
1R+1R
Flush door with side panel
G21
Internal flush door Flush door 1R Flush door G21
Double-leaf
Painted internal flush doorsInternal doorsInternal flush doors
that are suitable with different interiors. Interior doors are an important aspect of any room and can at the same time have various additional practical functions like fire, sound and water resistance. Painted flush doors are the most common internal door type. A flush door is a simple and classic, even-surfaced door, whereas a moulded door has a pattern pressed into the door surface. We produce single-leaf and double-leaf doors. Interior glazed doors have different glass separation and glass type possibilities. Internal door frames are made of high quality pine wood.A standard flush door has the 2014 lock and the 6540 KS JVA hinges.When required, the door set will include an oak threshold. The main door finishing is painted, veneered doors are stained, oiled or lacquered.
Internal doors with higher water resistance are produced as flush or moulded doors, and also with glazing. An internal door with higher water resistance is suitable for use as domestic bathroom door.
Strengthened internal doors are meant to be
used in places with intensive door usage. This type of doors are heavier and more durable. Strengthened internal doors are suitable for use in public buildings such as offices, hospitals, schools.
Water resistant internal doors are used in
heated working and living rooms. The door surface is covered with high pressure laminate and door leaf edges are made of birch, ash or oak. The door can withstand short term water flow and usage in high relative humidity conditions, after which the room must be intensively ventilated in order for the humidity to drop to the normal level again. A water resistant internal door is suitable in continuously used bathrooms, public laundry rooms, swimming pools.
are commonly used doors
3
Double-leaf flush door6R+6R
Double-leaf flush door6RK+6RK
Double-leaf flush door G01
Double-leaf flush door G03
Double-leaf flush door10R+10R
Double-leaf flush door10RK+10RK
Flush door with side panel
6R+3R
Flush door with side panel
6RK+3RK
Flush door with side panel
G01
Flush door with side panel
G03
Flush door with side panel
10R+5R
Flush door with side panel
10RK+5RK
Flush door 6R Flush door 6RK Flush door G01 Flush door G03s Flush door 10R Flush door 10RK
Structure
Non-rebated door leaf with thickness of 40 mm. Hollow core door leaves are constructed with a wood frame on its edges and a cardboard honeycomb filling in light doors or chipboard in massive doors, covered up with 3 mm fibreboard on the front and back. Vertical edges covered with PVC edge band.
Internal doors
Stefan Stefan 6R Stefan 1R
4
Harald 1RKHarald 6RKHarald
Christian 1RChristian 8RChristian
Painted moulded internal doors
Stefan 1R+1RStefan 6R+5R Stefan with side panel
Harald double-leafHarald 1RK with side panel
Christian 1R+1RChristian double-leaf
5
Stefan double-leaf Stefan 6R+6R
Harald 6RK+6RK
Christian 8R+8R
Structure
Non-rebated door leaf with thickness of 40 mm. Hollow core door leaves are constructed with a wood frame on its edges and a cardboard honeycomb filling in light doors or chipboard in massive doors, covered up with 3 mm fibreboard on the front and back. Vertical edges covered with PVC edge band.
Birch, rotary cutWhite oak, rift cut Pine, rift cutWhite ash, rift cutTeak
6
Veneered internal doors
Glass and veneer examples
Internal doorsVeneered internal doors are made using either vertical or
horizontal veneers. We offer a wide range of different natural wooden or artificial timber species. Please note that all timber veneers often show some discoloration, knots and other features, since in the nature every tree trunk has a different coloration and grain. The finishing options are either stained, oiled or lacquered.
Pine door 3P. Knotty internal pine door is a traditional solid
wood door suitable for any interiors. The doors are produced either lacquered or without finishing. The possible options for the doors without finishing are oiling, staining, lacquering or painting in many different colour tones. With proper maintenance the doors will last several generations.
Kura
Clear
Kathedral
Diamante
Pine door 3P Oak veneer internal door
SiseuksedFire resistant doors EI30, EI30/Rw=39dB
and EI30/Rw=42dB meet all fire safety requirements.The fire resistant doors are made of wooden frames covered with panels; the inside cavity is filled with non-combustible or slow-burning insulation materials and the finishing of the surfaces meets the interior design requirements. The fire resistant doors are meant for closing the openings between fire resistant sections of any rooms, whereas the difference between the temperatures of the these rooms must not exceed 5°C. The lock cases and hinges are fire tested and keep the door leaf closed and tight in case of fire. The cavity between the frame and the door leaf is filled with expanding intumescent seal. The fire resistant doors meeting all requirements have been marked with a label fixed on the door leaf and on the frame.Fire resistant doors can be painted or covered with veneer or with high pressure laminate.
Full glass sauna doors are meant for use in
steam rooms, but can be also used in other internal rooms (except in high steam Turkish baths). The door glass is thermally tempered and has higher resistance against mechanical damages and temperature fluctuations. Sauna door frames are made of specially selected pine wood and without any surface finishing, so that the customer could choose the finishing according the interior of the sauna room.
Sliding doors can be used for separating
interior rooms that lack sufficient floor space for opening the doors. The sliding door tracks can be installed either on the wall or on the ceiling. The wall next to the door opening must be free within the width of the door leaf (or, in case of a double sliding door, on both sides).
Special doors
7
Full glass sauna door
External doorsExternal doors, both the ones opening to the inside and to the outside
are made using special technology and can withstand the temperature fluctuations characteristic of the Northern climate. The door set consists of door leaf, frame, threshold, hinges and lock case. We produce veneered (teak) as well as painted, glazed and non-glazed external doors in different sizes. With teak veneered exterior doors, the door leaf will be moulded with pattern on covered with veneered decorative panels. Glazed doors have double glazing units. The doors are durable and thermostable due to the water-resistant polystyrene board and the shape perfection will be guaranteed by the aluminium sheets in the structure. The threshold is made of oak wood and protected with an aluminium slat. We produce external doors with one (T1) or two (T2) seals. One-seal external doors are especially suitable for houses with a storm porch and two-seal external doors for houses without a storm porch. Our external doors come in standard sizes of 890 x 2088/1988 mm or 990 x 2088/1988 mm. It is possible to order double-leaf doors and doors with a side panel.
In addition we produce side- and overlights suitable for external conditions to be installed to the side or above the external door. Non-opening glass panels can be combined with opaque parts. For especially complicated weather conditons we offer laminated external doors with higher weather resistance.
We produce certificated fire resistant external doors VU-T1/EI 30/Rw34dB.
8
Painted external doors
Sille Alexia Alexia 6R
Standard sizes
External frame sizes A x C 890x2088890x1988990x2088990x1988
Opening sizes9x21 9x20
10x21 10x20
Structure
Dulcia Gracia
C
A
Gracia 6R
9
Vertical jambSilicone sealPolystyreneAluminium sheetWater resistant HDFFinishingThresholdDoor leaf frameAluminium slat
Vertical jambSilicone sealPolystyreneAluminium sheetWater resistant HDFFinishingThresholdDoor leaf frameAluminium slat
External door T-1, cut view External door T-2, cut view
12
Kaia 5x1R
Cecilia 1R Tiina 1R Störö 1RRAL 7040
Gaily 3x1R Karin 3x1R
External doors Painted external doors
Technical dataStandard sizes for internal doors
Door frame sizes mm A x C
790x2090/1990 890x2090/1990 990x2090/1990
1190x2090/1990 1290x2090/1990 1390x2090/19901317x2090/1990
1517x2090/1990 1717x2090/1990 1917x2090/1990
690x2090/1990 Door leaf sizes mm B x D
Door leaf sizes mm B x D
Door opening sizes dm 7x21/20 8x21/20 9x21/20
10x21/20 12,0x21/20 13,0x21/20
14,0 x 21/2013,3x21/20 15,3x21/20 17,3x21/20 19,3x21/20
Standard sizes for external doors
Door frame sizes mm
A x C890x2088890x1988990x2088990x1988
Door opening sizes dm
9x20 10x21 10x20
9x21
C
A B
D
C
A B
D
Technical data
Door leaf
Door frame
Threshold
Lock case
Hinges
Glass
Finishing
Additional hardware
Usage field
Special solutions
Garantii
Flush and moulded internal door
Door leaf with thickness of 40 mm, door skin 3 mm fibreboard
Pine 42 x 92 mm, painted
ak,
2014
FT-65 KS
4 mm glass, clear or decorative
White paint NCS S 0502-Y
Ventilation latch**
Heated living rooms, offices
Special painting*
General guarantee 2 years
O lacquered
Veneered internal door
Door leaf with thickness of 40 mm, door skin 3 mm fibreboard, veneered
Veneered or stained pine wood 42 x 92 mm
ak,
2014
FT-65 KS orNTR 110-30T
4 mm glass, clear or decorative
Ventilation latch**
Heated living rooms, offices
General guarantee 2 years
O lacquered
Veneered (oak, pine, teak, birch) + (stain) + lacquer or oil
Strengthened internal door
Door leaf with thickness of 40 mm, door skin 6 mm fibreboard
Painted, veneered or stained pine wood 42 x 92 mm
ak,
According to order
FT-65 KS orNTR 110-30T
4-7 mm glass, clear or decorative
White or special paint*. Veneered (oak, pine, teak, birch)+(stain)+ lacquer or oil. Laminated with high pressure laminate.
Ventilation latch**, kick plate RST
Public buildings, offices
Moulded pattern on painted doors
General guarantee 2 years
O lacquered
Internal door with higher water resistance
Door leaf with thickness of 40 mm, door skin 3 mm fibreboard
Painted, veneered or stained pine wood 42 x 92 mm
ak,
According to order
FT-65 KS orNTR 110-30T
4 mm glass, clear or decorative
White or special paint*. Veneered (oak, pine, teak, birch)+(stain)+ lacquer or oil. Laminated with high pressure laminate.
Ventilation latch**, kick plate RST
Public buildings, offices
General guarantee 2 years
O lacquered
Heli-ja tuletõkkeuks
Door leaf with thickness of
with thickness of
Painted, veneered or stained pine wood 42 x 92 mm
ak,
or g
NTR 110-30TSS
White or special paint*. Veneered (oak, pine, teak, birch)+(stain)+ lacquer or oil. Laminated with high pressure laminate.
Apartments and hotel rooms
General guarantee 2 years
52 mm EI30/Rw=39dB,
63 mm EI30/Rw=42dB
O lacquered
Abloy, ASSA analo
External door
Rebated door leaf with thickness of62 mm
Pine wood
ak,
or g
N3248-110TMKS T-1110x36KSS T-2
Double glazing unit with spectrally selective (or lower emittance) or decorative glass
White or special colour * Teak veneered+(stain)+oil
Door viewer ”Yeti”, kick plate RST
Public buildings, residential houses
General guarantee 2 years
T-1 42x105 mm, T-2 54x105 mm
O lacquered
Abloy, ASSA analo
Water resistant internal door
Door leaf with thickness of 40 mm, door skin 3 mm fibreboard
Painted, pine wood 42 x 92 mm
ak,
According to order
NTR 110-30T
Laminated with high pressure laminate.
Humid rooms
General guarantee 2 years
O lacquered
Sauna door
Full glass
Pine wood 42 x 92 mm
Roll lock 4238
FL-48
8 mm tempered***
Saunas
General guarantee 2 years
625x2040/1940725x2040/1940 825x2040/1940 925x2040/1940
725+398x2040/1940 825+398x2040/1940925+398x2040/1940625+625x2040/1940725+725x2040/1940825+825x2040/1940925+925x2040/1940
825x2040825x1940925x2040925x1940
* According to Monicolor Nova, Symphony, Tintorama, RAL catalogue * Plastic (white or brown) * Colour bronze or grey* **
18
Door cuts
Door horizontal cut
B
D
A
C
HOLE
Top view
Wall Wall
Floor
Door vertical cut
Determining door handedness
19
Left-handed door Right-handed door
HO
LE
View from the opening point
Puidu 6EE 71020 ViljandiTel (+372) 433 0610, 433 0630Fax (+372) 433 [email protected]
AS Viljandi Aken ja Uks TALLINN OFFICEMasina 22, 10114 TallinnTel. (+372) 630 0734Fax (+372) 630 [email protected]