ISO 9001 FM 75767 - · PDF fileISO 4422-2 : 1996 (E) PVC-U Pipes for water supply-Superseded by ISO 1452-2 / BS EN ISO 1452 Nominal outside diameters dn and nominal wall thickness

1452EN 1519BS EN 1329BS EN 1401

ISO 9001 FM 75767 1452

EN 1519

Cosmoplast uPVC pipes and fittings are widely used in

• Distribution of cold water under pressure.

• Underground Drainage and Sewerage Lines.

• Air Conditioning Drain Systems.

• Piping networks for swimming pools facilities.

• Piping networks for rainwater utilization.

• Irrigation networks.

• Circulation of cold fluids in industry.

• Foodstuff industries.

• Transport of wide range of chemicals and corrosive fluids in the industry.

uPVC Pipes And Fittings

Fields Of Applications

3

ISO 9001 FM 75767

The expertise in manufacturing plastic piping systems in the Gulf region for more than three decades has enabled Cosmoplast to develop and deliver products with special consideration for the exclusive needs of the Gulf region. One such need is to provide the user with high quality, tough and durable replacement for normal metallic pipe and fittings for water distribution under pressure.

Cosmoplast uPVC pipes and fittings satisfy the increasing demand for metric and imperial sizes PVC pipes and fittings for plumbing and infrastructure applications, pertaining to cold water distribution, underground drainage, Air Conditioning (A/C) drain and ducting applications that demand high levels of toughness, chemical and thermal resistance along with cost effective installations.

Solvent Welding in hot weather conditions:During hot weather conditions of 35°C and above, special consideration should be given to the process of Solvent Welding of UPVC pipes and �ttings to ensure a leak proof joint. Solvent cements contain high strenght chemical solvens which evaporate faster at elevated temperatures and in windy conditions.When PVC pipes are stored in open areas or under direct sunlight, the pipe surface temperature will be around 15ºC higher than the ambient temperature. The solvent cement attacks the hot surfaces faster and deeper. Therefore, it is very important to avoid using excess cement during the jointing process to avoid creating pools of cement inside the �tting and pipe sockets. Excess solvent cement should be wiped o� the joined surfaces quickly.Recommendation for the solvent welding during hot weather conditions:1. Solvent cements and cleaners should be stored in a cool or shady areas.2. Pipes and �ttings should be stored in a shady area before solvent welding.3. The surfaces to be joined should be cooled by wiping with a wet a cloth. The surfaces should be

dry before applying the solvent cement.4. Solvent welding is recommended to be done during the cooler morning hours.5. The two surfaces should be joined quickly while they are still wet with cement.6. Shake or stir the solvent cement well before use.7. Allow at least 24 hours for the joints to cure before pressurizing the system. For sizes above 8” you

should allow at least 48 hours.

Testing PVC Networks

-U

26

ISO 9001 FM 75767

*Suitable for water supply, sewerage and ducting applications

DIN 8061/62 : 2009 : PVC-U pressures pipes (SF=2)

Note: S = pipe series, SF = safety factor 2, PN = working pressure at 20˚C for 50 years of service

*

6 8 10 16

(mm)

25 32

1.5

1.5

BSEN 1452-2 : 2009 - Plastics Piping Systems (PVC-U) * - Metric Sizes

a To apply a design coefficient of 2.5 (instead of 2.0) for pipes with nominal diameters above 90 mm, the next higher pressure rating, PN, shall be chosen.

Note 1: The nominal wall thicknesses conform to ISO 4065[4]

Note 2: The PN 6 values for S 20 and S 16 are calculated with the preferred number 6,3.

27

ISO 9001 FM 75767


ISO 4422-2 : 1996 (E) PVC-U Pipes for water supply-Superseded by ISO 1452-2 / BS EN ISO 1452Nominal outside diameters dn and nominal wall thickness en [ based on an overall service (design)coefficient of C = 2.5]

Notes:1 - S is the pipe series and equals

2- SDR is the standard dimension ratio and equals

3- S and SDR are related by the equation [SDR] = 2[S] + 1

2en

dn - en

en

dn

Nominal outside diameters dn and nominal wall thickness en [ based on an overall service (design)coefficient of C = 2.0]

Note - To aply an overall design (service) coefficient C of 2.5 for pipes with nominal diameters in this table, the next higher nominal pressure PN shall be selected, e.g an S 10 series pipe rated at PN 12.5 will be selected for PN 10 applications when a C of 2.5 is required.

28

ISO 9001 FM 75767

Imperial Sizes:BS 3505 : 1986 : PVC-U Pressure Pipes for Cold Potable Water*

BS 3506 : 1969 PVC-U Pressure Pipes For Industrial Uses*

Class D Class EClass COutside Diameter

(mm)9.0 bar 12.0 bar 15.0 bar

½’’¾’’1’’

1 ¼’’1 ½’’2’’3’’4’’5’’6’’8’’10’’12’’14’’16’’18’’20’’24’’

21.2026.6033.4042.1048.1060.2088.70114.10140.00168.00218.80272.60323.40355.00405.90456.70507.50609.10

21.5026.9033.7042.4048.4060.5089.10114.50140.40168.50219.40273.40324.30356.00406.90457.70508.50610.10

-----

2.503.504.505.506.607.809.7011.5012.6014.5016.3018.1021.70

-----

3.004.105.206.407.609.0011.2013.3014.5016.7018.8020.9025.00

---

2.202.503.104.606.007.308.80

10.3012.8015.2016.7019.0021.40

--

---

2.703.003.705.306.908.40

10.2011.9014.8017.5019.2021.9024.6

--

1.701.902.202.703.103.905.707.309.00

10.8012.6015.7018.7020.5023.40

---

2.102.502.703.203.704.506.608.40

10.4012.5014.5018.1021.6023.6027.00

---

Pressure ratings for working pressures at 20° CClass C 9.0 bar 130.0 lbf/in 300 ft headClass D 12.0 bar 173.0 lbf/in 400 ft headClass E 15.0 bar 217.0 lbf/in 500 ft head

29

ISO 9001 FM 75767


ASTM D 2241 : PVC Pressure Pipes (SDR Series)*

Pressure rating based on water at 23°C for unthreaded pipes.

ASTM D 1785 : Polyvinyl Chloride (PVC) Pipes SCH 40/SCH 80*SCH 40 SCH 80

½”¾”1”

1¼”1½”2”

2½”3”4”6”8”10”12”14’’16’’18’’20’’24’’

21.2426.5733.2742.0348.1160.1772.8488.70114.07168.00218.70272.67323.47355.22405.92

456.72507.42608.81

21.4426.7733.5342.2948.4160.4773.2089.10

114.53168.56219.46273.43324.23355.98406.88457.68508.58610.39

2.772.873.383.563.683.915.165.496.027.118.189.2710.3111.1012.7014.2715.0617.45

3.283.383.894.074.194.425.776.156.737.979.17

10.3911.5512.4514.2215.9716.8619.53

41.4033.1031.0025.5022.8019.3020.7017.9015.2012.4011.009.709.009.109.109.108.408.40

3.733.914.554.855.085.547.017.628.5610.9712.7015.0617.4519.0521.4123.8026.1930.94

4.244.425.085.435.696.207.858.539.5812.2914.2216.8719.5321.3423.9826.6429.3434.65

58.6047.6043.4035.9032.4027.6029.0025.5022.1019.3017.2015.9015.9015.4015.4015.4015.4014.70

30

ISO 9001 FM 75767


Wall Thickness (mm)Outside Diameter (mm) Wall Thickness (mm) Wall Thickness (mm)PN 9 (Class C) PN 12 (Class D) PN 15 (Class E)

½”¾”1”

1¼”1½”2”3”4”6”8”10”12”16’’18’’20’’24’’

21.226.633.442.148.160.288.7114.1168.0218.8272.6323.4405.9456.7507.5609.1

21.526.933.742.448.460.589.1

114.5168.5219.4273.4324.3406.9457.7508.5610.1

-----

2.53.54.56.67.89.711.514.516.318.121.7

-----

3.04.15.27.69.011.213.316.718.820.925.0

---

2.22.53.14.66.08.810.312.815.219.021.4

--

---

2.73.03.75.36.910.211.914.817.5

21.9024.7

--

1.71.92.22.73.13.95.77.3

10.812.615.718.7

23.40---

2.12.52.83.33.74.56.68.412.514.518.121.6

27.00---

BSEN 1452 : 2000 Plastic Piping Systems (PVC-U)* - Imperial Sizes

BSEN 1401 - 1 SDR41 PVC-U Pipes for underground drainage:

31

ISO 9001 FM 75767


Mean OutsideDiameter

min

110125160200250315*355400*450500630*710800*9001000

I. *Pipes to these nominal sizes are not normally available from stock.

I. SRD 5 I is applicable for application area code “U” only.

110.3125.3160.4200.5250.5315.6355.6400.7450.8500.9631.1711.2801.3901.51001.6

--

3.23.94.96.27.07.08.89.812.313.915.717.619.6

--

3.84.55.67.17.98.99.9

11.013.815.517.519.621.8

3.23.24.04.96.27.78.79.8

11.012.315.417.419.622.024.5

3.83.84.65.67.18.79.8

11.012.313.817.219.421.824.427.2

3.23.74.75.97.39.2

10.411.713.214.618.4

----

3.84.35.46.78.3

10.411.713.114.816.320.5

----

max

SN 2SDR 52

SN 4SDR 41

SN 8SDR 34

emin em, max emin em, max emin em, max

PVC Ducts and Conduits:NEMA TC 2 : 2003 : Electrical PVC-U Tubing and Conduits:This covers the following type of Electrical Polyvinyl Chloride (PVC) conduit (EPC).

EPC-40-PVC = Electrical PVC conduit designed for normal duty (Schedule-40) applications above ground; also used for all concrete encased applications or direct burial.

EPC-80-PVC = Electrical PVC conduit designed for heavy duty (Schedule-80) applications above ground; also udsed for all concrete encased applications or direct burial.

These covers the following types of plastic utilities duct for installation underground for communications and electrical wire and cable.Type EB -20 Designed for burial encased in concreteType EB -35 Designed for burial encased in concreteType DB -60 Designed for direct burial without encasement in concreteType DB -100 Designed for direct burial without encasement in concreteType DB -120 Designed for direct burial without encasement in concreteType DB products are also used for concrete encased applications.

PVC-U Duct Pipes for Electrical and Telephone Cables

Stocks are available with plain ends or with sockets. Standard Length: 6 meters. Colour available: Black

NEMA TC 6 & 8 : PVC-U Duct Pipe for Underground Installations

32

ISO 9001 FM 75767

Solvent Welding Fittings to EN1452 And ASTMD 2467/2464 SCH 80

uPVC Fittings / Imperial Sizes

COUPLING

½”¾”1”

1¼”1½”2”

2½”3”4”6”8”10”12”

SIZE QTY/CTN

40523533611914081 543614128--

CODE

PVC-80-CO-0.5PVC-80-CO-0.75PVC-80-CO-1.0PVC-80-CO-1.25PVC-80-CO-1.5PVC-80-CO-2.0PVC-80-CO-2.5PVC-80-CO-3.0PVC-80-CO-4.0PVC-80-CO-6.0PVC-80-CO-8.0PVC-80-CO-10.0PVC-80-CO-12.0

45˚ ELBOW ½”¾”1”

1¼”1½”2”

2½”3”4”6”8”10’’12’’

SIZE QTY/CTN5403401851099048 30201074--

CODE

PVC-80-EB45-0.5PVC-80-EB45-0.75PVC-80-EB45-1.0PVC-80-EB45-1.25PVC-80-EB45-1.5PVC-80-EB45-2.0PVC-80-EB45-2.5PVC-80-EB45-3.0PVC-80-EB45-4.0PVC-80-EB45-6.0PVC-80-EB45-8.0PVC-80-EB45-10.0PVC-80-EB45-12.0

½”¾”1”

1¼”1½”2”

2½”3”4”6”8”10’’12’’

SIZE QTY/CTN510310180996941 36141254--

90˚ ELBOW CODE

PVC-80-EB90-0.5PVC-80-EB90-0.75PVC-80-EB90-1PVC-80-EB90-1.25PVC-80-EB90-1.5PVC-80-EB90-2.0PVC-80-EB90-5.5PVC-80-EB90-3PVC-80-EB90-4PVC-80-EB90-6PVC-80-EB90-8PVC-80-EB90-10PVC-80-EB90-12

EQUAL TEE

½”¾”1”

1¼”1½”2”

2½”3”4”6”8”10’’12’’

SIZE QTY/CTN

330201119705230 22181043--

CODE

PVC-80-TE-0.5PVC-80-TE-0.75PVC-80-TE-1.0PVC-80-TE-1.25PVC-80-TE-1.5PVC-80-TE-2.0PVC-80-TE-2.5PVC-80-TE-3.0PVC-80-TE-4.0PVC-80-TE-6.0PVC-80-TE-8.0PVC-80-TE-10.0PVC-80-TE-12.0

33

ISO 9001 FM 75767

END CAP

REDUCING TEE¾” x ½”1” x ½”1” x ¾”

1¼” x ¾”1¼” x 1”1½” x 1”

1½” x 1¼”2” x 1¼”2” x 1½”

2½” x 1½”2½” x 2”3” x 2”

3” x 2½”4” x 2½”4” x 3”6” x 4”

SIZE QTY/CTN230159152958256483636282120201216-

PVC-80-RT-0.75/0.5PVC-80-RT-1.0/0.5PVC-80-RT-1.0/0.75PVC-80-RT-1.25/0.75PVC-80-RT-1.25/1.0PVC-80-RT-1.5/1.0PVC-80-RT-1.5/1.25PVC-80-RT-2.0/1.25PVC-80-RT-2.0/1.5PVC-80-RT-2.5/1.5PVC-80-RT-2.5/2.0PVC-80-RT-3.0/2.0PVC-80-RT-3.0/2.5PVC-80-RT-4.0/2.5PVC-80-RT-4.0/3.0PVC-80-RT-6.0/4.0

CODE

½”¾”1”

1¼”1½”2”

2½”3”4”6”8”10’’12’’

SIZE QTY/CTN1,200900486320200140989048189--

CODE

PVC-80-EC-0.5PVC-80-EC-0.75PVC-80-EC-1.0PVC-80-EC-1.25PVC-80-EC-1.5PVC-80-EC-2.0PVC-80-EC-2.5PVC-80-EC-3.0PVC-80-EC-4.0PVC-80-EC-6.0

PVC-80-EC-8.0PVC-80-EC-10.0PVC-80-EC-12.0

REDUCING BUSH SIZE QTY/CTN69337837828028028021021021014014014014014012060323212--

¾” x ½”1” x ½”1” x ¾”

1¼” x ½”1¼” x ¾”1¼” x 1”

1¼” x 1½”1½” x ¾”1½” x 1”2” x ½”2” x ¾”2” x 1”

2” x 1½”2” x 1¼”2½” x 2”3” x 2½”4” x 3”6” x 4”8” x 6”10” x 8”12” x 10”

PVC-80-RB-0.75/0.5PVC-80-RB-1.0/0.5PVC-80-RB-1.0/0.75PVC-80-RB-1.25/0.5PVC-80-RB-1.25/0.75PVC-80-RB-1.25/1.0PVC-80-RB-1.25/1.5PVC-80-RB-1.5/0.75PVC-80-RB-1.5/1.0PVC-80-RB-2.0/0.5PVC-80-RB-2.0/0.75PVC-80-RB-2.0/1.0PVC-80-RB-2.0/1.5PVC-80-RB-2.0/1.25PVC-80-RB-2.5/2.0PVC-80-RB-3.0/2.5PVC-80-RB-4.0/3.0PVC-80-RB-6.0/4.0PVC-80-RB-8.0/6.0PVC-80-RB-10.0/8.0PVC-80-RB-12.0/10.0

CODE

34

ISO 9001 FM 75767

Solvent Welding Fittings to EN1452 And ASTMD 2467/2464 SCH 80 (Continue)

FEMALE THREADED END CAP

½”¾”

SIZE QTY/CTN1,200900

CODE

PVC-80-FC-0.5

PVC-80-FC-0.75

MALE THREADED PLUG½”¾”1”

1¼”1½”2”

SIZE QTY/CTN1200700375420315168

CODE

PVC-80-MC-0.5PVC-80-MC-0.75PVC-80-MC-1.0PVC-80-MC-1.25PVC-80-MC-1.5PVC-80-MC-2.0

35

ISO 9001 FM 75767

FEMALE THREADED ELBOW QTY/CTN

410260180

½”¾”1”

SIZECODE

PVC-80-FE-0.5

PVC-80-FE-0.75

PVC-80-FE-1.0

UNION QTY/CTN967260483624---

½”¾”1”

1¼”1½”2”

2½”3”4”

SIZECODE

PVC-80-UN-0.5 PVC-80-UN-0.75 PVC-80-UN-1.0 PVC-80-UN-1.25 PVC-80-UN-1.5 PVC-80-UN-2.0 PVC-80-UN-2.5 PVC-80-UN-3.0 PVC-80-UN-4.0

Solvent Welding Fittings to EN1452 And ASTMD 2467/2464 SCH 80 (Continue)SINGLE PIECE FLANGE QTY/CTN No. of Holes

45 444888

2"PVC-80-FG-2.0242 ½"PVC-80-FG-2.5

243"PVC-80-FG-3.0

164"PVC-80-FG-4.0106"PVC-80-FG-6.068"PVC-80-FG-8.0

FLANGE ADAPTER & RING QTY/CTN No. of Holes

3 1212

10"PVC-80-FG-10.0212"PVC-80-FG-12.0

MALE THREADED ADAPTER QTY/CTN664385252150195130604818

½”¾”1”

1¼”1½”2”

2½”3”4”

SIZE

PVC-80-MA-0.5PVC-80-MA-0.75PVC-80-MA-1.0PVC-80-MA-1.25PVC-80-MA-1.5PVC-80-MA-2.0PVC-80-MA-2.5PVC-80-MA-3.0PVC-80-MA-4.0

CODE

FEMALE THREADED ADAPTER QTY/CTN40023314419813972453612

½”¾”1”

1¼”1½”2”

2½”3”4”

SIZECODE

PVC-80-FA-0.5PVC-80-FA-0.75PVC-80-FA-1.0PVC-80-FA-1.25PVC-80-FA-1.5PVC-80-FA-2.0PVC-80-FA-2.5PVC-80-FA-3.0PVC-80-FA-4.5

MALE ADAPTER WITH BRASS THREAD

½”¾”1”

1¼”1½”2”

SIZE QTY/CTN

664385252150195130

CODE

PVC-80-BMA-0.5PVC-80-BMA-0.75PVC-80-BMA-1.0PVC-80-BMA-1.25PVC-80-BMA-1.5PVC-80-BMA-2.0

36

ISO 9001 FM 75767

FEMALE ADAPTER WITH BRASS THREAD

FEMALE TEE WITH BRASS THREAD

½”¾”

SIZE QTY/CTN200200

SIZE

PVC-80-BFA-0.5PVC-80-BFA-0.75

FEMALE ELBOW WITH BRASS THREAD

½”¾”

SIZE QTY/CTN180144

CODE

PVC-80-BFE-0.5PVC-80-BFE-0.75

½”¾”

SIZE QTY/CTN11090

CODE

PVC-80-BFT-0.5PVC-80-BFT-0.75

Solvent Welding Fittings to EN1452 And ASTMD 2467/2464 SCH 80 (Continue)

37

ISO 9001 FM 75767

Solvent Welding Fittings to ASTMD 2466 SCH 40

COUPLER QTY/CTN720480270175112801105436

½”¾”1

1¼”1½”2”

2½”3”4”

SIZECODE

PVC-40-CO-0.5PVC-40-CO-0.75PVC-40-CO-1.0PVC-40-CO-1.25PVC-40-CO-1.5PVC-40-CO-2.0PVC-40-CO-2.5PVC-40-CO-3.0PVC-40-CO-4.0

450 ELBOW½”¾”1”

1¼”1½”2”

2½”3”4”

SIZE QTY/CTN5403601501008040303616

CODE

PVC-40-EB-0.5PVC-40-EB-0.75PVC-40-EB-1.0PVC-40-EB-1.25PVC-40-EB-1.5PVC-40-EB-2.0PVC-40-EB-2.5PVC-40-EB-3.0PVC-40-EB-4.0

900 ELBOW400280150906030242416

QTY/CTN½”¾”1

1¼”1½”2”

2½”3”4”

SIZECODEPVC-40-EB-0.5PVC-40-EB-0.75PVC-40-EB-1.0PVC-40-EB-1.25PVC-40-EB-1.5PVC-40-EB-2.0PVC-40-EB-2.5PVC-40-EB-3.0PVC-40-EB-4.0

REDUCING COUPLING¾” x ½”1” x ½”1” x ¾”

1¼” x 1”1¼” x ¾”

1½” x 1¼”1½” x 1”2” x 1½”2” x 1¼”2½” x 2”2½” x 1½3” x 2½”3” x 2”4” x 3”

4” x 2½”

SIZE QTY/CTN4083362943603991702641541686376

1001004856

CODE

PVC-80-RC-0.75/0.5PVC-80-RC-1.0/0.5PVC-80-RC-1.0/0.75PVC-80-RC-1.25/1.0PVC-80-RC-1.25/0.75PVC-80-RC-1.5/1.25PVC-80-RC-1.5/1.0PVC-80-RC-2.0/1.5PVC-80-RC-2.0/1.25PVC-80-RC-2.5/2.0PVC-80-RC-2.5/1.5PVC-80-RC-3.0/2.5PVC-80-RC-3.0/2.0PVC-80-RC-4.0/3.0PVC-80-RC-4.0/2.5

Solvent Welding Fittings to ASTMD 2466 SCH 40 (Continue)

TEE300200100604528332012

QTY/CTN

½”¾”1”

1¼”1½”2”

2½” 3”4”

SIZEPVC-40-TE-0.5PVC-40-TE-0.75PVC-40-TE-1.0PVC-40-TE-1.25PVC-40-TE-1.5PVC-40-TE-2.0PVC-40-TE-2.5PVC-40-TE-3.0PVC-40-TE-4.0

CODE

REDUCING TEE QTY/CTN20010810860604848

¾” x ½”1” x ½”1” x ¾”

1¼” x ¾”1¼” x 1”1½ x ¾”1½ x 1”

SIZECODE

PVC-40-RT-0.75/0.5PVC-40-RT-1.0/0.5PVC-40-RT-1.0/0.75PVC-40-RT-1.25/0.75PVC-40-RT-1.25/1.0PVC-40-RT-1.5/0.75PVC-40-RT-1.5/1.0

38

ISO 9001 FM 75767

MALE THREADED ADAPTER½”¾”1”

1¼”1½”2”

2½”3”4”

SIZE QTY/CTN93649036020012075754828

CODE

PVC-40-MA-0.5PVC-40-MA-0.75PVC-40-MA-1.0PVC-40-MA-1.25PVC-40-MA-1.5PVC-40-MA-2.0PVC-40-MA-2.5PVC-40-MA-3.0PVC-40-MA-4.0

FEMALE THREADED ADAPTER½”¾”1”

1¼”1½”2”

2½”3”4”

SIZE QTY/CTN5603602401509660906030

CODE

PVC-40-FA-0.5PVC-40-FA-0.75PVC-40-FA-1.0PVC-40-FA-1.25PVC-40-FA-1.5PVC-40-FA-2.0PVC-40-FA-2.5PVC-40-FA-3.0PVC-40-FA-4.0


REDUCING BUSH SIZE QTY/CTN6933783782802802802102102101401401401401401206032

¾” x ½”1” x ½”1”x ¾”

1¼” x ½”1¼” x ¾”1¼” x 1”

1¼” x 1½” 1½” x ¾”1½ “x 1”2 x ½”2 x ¾”2 x 1”

2” x 1½”2 x 1¼”2½ x 2”3” x 2½”4” x 3”

CODE

PVC-40-RB-0.75/0.5PVC-40-RB-1.0/0.5PVC-40-RB-1.0/0.75PVC-40-RB-1.25/0.5PVC-40-RB-1.25/0.75PVC-40-RB-1.25/1.0PVC-40-RB-1.25/1.5PVC-40-RB-1.5/0.75PVC-40-RB-1.5/1.0PVC-40-RB-2.0/0.5PVC-40-RB-2.0/0.75PVC-40-RB-2.0/1.0PVC-40-RB-2.0/1.5PVC-40-RB-2.0/1.25PVC-40-RB-2.5/2.0PVC-40-RB-3.5/2.5PVC-40-RB-4.0/3.0

FEMALE THREADED ELBOW½”¾”1”

¾”x ½”1”x ¾”1”x ½”

SIZE QTY/CTN400280150280200200

CODE

PVC-40-FE-0.5PVC-40-FE-0.75PVC-40-FE-1.0PVC-40-FE-0.75/0.5PVC-40-FE-1.0/0.75PVC-40-FE-1.0/0.5

39

ISO 9001 FM 75767

MALE THREADED ELBOW ½”¾”1”

SIZE QTY/CTN400360700

CODEPVC-40-ME-0.5PVC-40-ME-0.75PVC-40-ME-1.0

FEMALE THREADED TEE QTY/CTN300200100200100100

½”¾”1”

¾”x ½”1”x ¾”1”x ½”

SIZECODE

PVC-40-FT-0.5PVC-40-FT-0.75PVC-40-FT-1.0PVC-40-FT-0.75/0.5PVC-40-FT-1.0/0.75PVC-40-FT-1.0/0.5

UNION QTY/CTN967260483624

½”¾”1”

1¼”1½”2”

SIZECODE

PVC-80-UN-0.5 PVC-80-UN-0.75 PVC-80-UN-1.0 PVC-80-UN-1.25 PVC-80-UN-1.5 PVC-80-UN-2.0

DOUBLE UNION BALL VALVE½”¾”1”

1-1¼”1-1½”

2½”2”

3”

SIZE QTY/CTNCODE

PVC-SS-DUBV-0.5PVC-SS-DUBV-0.75PVC-SS-DUBV-1.0PVC-SS-DUBV-1.25PVC-SS-DUBV-1.5PVC-SS-DUBV-2.0

PVC-SS-DUBV-3.0

64563630168

PVC-SS-DUBV-2.5 84

4”PVC-SS-DUBV-4.0 2

SINGLE UNION BALL VALVE

½”¾”1”

1¼”1½”2” 3”4”

SIZE QTY/CTNCODE

PVC-80-SUBV-0.5PVC-80-SUBV-0.75PVC-80-SUBV-1.0PVC-80-SUBV-1.25PVC-80-SUBV-1.5PVC-80-SUBV-2.0PVC-80-SUBV-3.0PVC-80-SUBV-4.0

1208130422020 82


FEMALE THREADED END CAP QTY/CTN1200900

½”¾”

SIZECODE

PVC-40-FC-0.5PVC-40-FC-0.75

CROSS20016072

QTY/CTN½”¾”1”

SIZECODE

PVC-40-CR-0.5PVC-40-CR-0.75PVC-40-CR-1.0

END CAP QTY/CTN1200900486320200140989048

½”¾”1”

1¼”1½”2”

2½”3”4”

SIZECODE

PVC-40-EC-0.5PVC-40-EC-0.75PVC-40-EC-1.0PVC-40-EC-1.25PVC-40-EC-1.5PVC-40-EC-2.0PVC-40-EC-2.5PVC-40-EC-3.0PVC-40-EC-4.0

REDUCING 900 ELBOW QTY/CTN280200

¾” x ½”1” x ½”

SIZECODE

PVC-40-RE-0.75/0.5PVC-40-RE-1.0/0.5

40

ISO 9001 FM 75767

Solvent Welding Fitting, PN16 to DIN 8063 and EN1452

uPVC Fittings / Metric Sizes

90° ELBOW, SOLVENT WELDING QTY/CTN

3222111

*

*

45° ELBOW, SOLVENT WELDING QTY/CTN

42222111

COUPLER, SOLVENT WELDING QTY/CTN

4422211

41

ISO 9001 FM 75767

**

**

PN10*

Solvent Welding Fitting, PN16 (Continue)

MALE ADAPTER, SOLVENT WELDING QTY/CTN

1700800500225216105454036

FEMALE ADAPTER, SOLVENT WELDING QTY/CTN

1500500550

162105

30

360

8

3

EQUAL TEE, SOLVENT WELDING QTY/CTN

700400250128703442251542211111

42

ISO 9001 FM 75767

PN10*

*

*

REDUCING TEE, SOLVENT WELDING QTY/CTN

4002001251447540403015151511

225110225160

1280250 280x250*

225x110225x160

36

END CAP, SOLVENT WELDING QTY/CTN

28001500900500330175106602718844222

FEMALE THREADED END CAP, SOLVENT WELDING QTY/CTN

42023072-

1200

900-

43

ISO 9001 FM 75767


PN10*

*

*

QTY/CTN

20--------

QTY/CTN

--

500500

300

208

8644322

44

ISO 9001 FM 75767


PN10*

*

*

*

8250x160250160

MALE THREADED END CAP QTY/CTN

1200

NON-PRESSURE PROTECTION CAP

1155066362015

QTY/CTN

700375168

45

ISO 9001 FM 75767

DOUBLE UNION BALL VALVE SIZE QTY/CTNCODE

PVC-SS-DUBV-0.5PVC-SS-DUBV-0.75PVC-SS-DUBV-1.0PVC-SS-DUBV-1.25PVC-SS-DUBV-1.5PVC-SS-DUBV-2.0

PVC-SS-DUBV-3.0

64563630168

PVC-SS-DUBV-2.5 84

PVC-SS-DUBV-4.0 2

2025324050637590

110


PN10*

FLANGE ADAPTER & RING QTY/CTN

604015146632221

*

*

*

Rubber Ring Fittings to BSEN 1452, PN10QTY/CTN

SIZE(mm) D D1 H L

125.70

181.50

225.00

251.50

276.50347.80

110

160

200

225

250315

111.50

162.30

202.50

227.50

252.30318.30

122.00

141.00

152.00

139.90

152.00198.00

188.50

236.50

270.00

288.00

312.00393.00

8

4

2

2

11

QTY/CTN

SIZE(mm) D D1 H L

125.70

181.50

225.00

251.50

276.50347.80

110

160

200

225

250315

111.50

162.30

202.50

227.50

252.30318.30

122.00

141.00

152.00

139.00

152.00198.00

152.00

183.50

203.00

217.00

236.00291.00

8

4

3

2

21

45° ELBOW, PUSH FIT

REDUCING COUPLER, PUSH FIT QTY/CTN

SIZE(mm) D D1 H L

160x110200x160225x160225x200250x200250x225315x250355x315

181.50225.00251.50251.00276.50276.50347.80388.50

162.30202.50227.50227.50252.30252.30318.30356.63

141.00152.00139.00139.00152.00152.00198.00235.00

312.00300.00346.00389.25389.00371.75458.00476.00

63222211

D2 D3 H1

125.70181.50181.50225.00225.00251.50276.50347.80

111.50162.30162.30202.50202.50227.50252.30318.30

122.00141.00141.00152.00152.00139.00152.00198.00

EQUAL TEE, PUSH FIT QTY/CTN

SIZE(mm) D D1 H L

125.70

181.50

225.00

251.50

276.50347.80

110

160

200

225

250315

111.50

162.30

202.50

227.50

252.30318.30

122.00

141.00

152.00

139.00

152.00198.00

152.00

183.50

203.00

217.00

236.00291.00

6

3

2

1

11

L1

202.50

236.50

270.00

288.00

312.00393.00

COUPLER (SOCKET), PUSH FIT QTY/CTN

SIZE(mm) D D1 H L

90110160200225250315355

105.50125.70181.50225.00251.50276.50347.80388.50

92.50111.50162.30202.50227.50252.30318.30356.63

95.00122.00141.00152.00139.00152.00198.00235.00

200.00280.00303.00310.00362.00382.70484.00384.00

286432211

46

ISO 9001 FM 75767

a) Perforated Pipes

Perforated & Slotted Pipes

47

ISO 9001 FM 75767

Cosmoplast produces wide range of perforated uPVC pipes for Sub-soil drainage applications.The below sketches show the general configurations which may vary depending on size andclass of pipe to be perforated.

Straight rows

t

d

40°40°

40°

a

D

n:4

Staggered rows

n:4

p

pp

Parameters Limits of Variation

Outside diameter D 32mm to 630mm instandard sizes

Wall thickness t In accordance with the classof pipes selected

Longitudinalpitch of holes

p 30mm to 200mm dependingon size and class of pipe

Hole Diameter d 3mm to 10mm dependingon size and class of pipe

Number of rows n 1 to 4

Angular pitchof holes

a 40 degrees for 3 or 4 rows40, 80 or 120 degrees for 2 rows

b) Slotted pipesCosmoplast produces wide range of SLOTTED uPVC pipes for Sub-soil and Land drain

Cosmoplast uPVC slotted pipes have two rows of circumferential slots which are machinecut and staggered, the slots are cut at an angle of 45° to give a large open area free to carrywater. Pipes are slotted to give maximum infiltration as detailed below.

Nom

inal

Dia

45°

2

120

A

75 75 75 75 75

ASLOT WIDTH 2 TO 4mm

Slot Length

48

ISO 9001 FM 75767

49

ISO 9001 FM 75767

uPVC Bell Mouth Socket

uPV C Puddle Flange

L

B

OD

114.1 145

330

168.0

218.8

272.6

L

B

OD

W

DDW

t

L

L1

B

A

50

ISO 9001 FM 75767

51

ISO 9001 FM 75767

This Licence remains the property of The British Standards Institution and shall be returned immediately upon request.To check its validity telephone +44 (0)845 080 9000

Information and contact: BSI, Kitemark Court, Davy Avenue, Knowlhill, Milton Keynes MK5 8PP. Tel: +44 845 080 9000.BSI Assurance UK Limited, registered in England under number 7805321, at 389 Chiswick High Road, London, W4 4AL, UK.A member of the BSI Group of Companies.

No. KM 593028

First Issued: 19/08/2014 Latest Issue: 19/08/2014

Page 1 of 2

Kitemark™ Licence



This is to certify that: Cosmoplast Industrial Co LLCBranch of Abu Dhabi 1ICADAbu DhabiUnited Arab Emirates

Holds Kitemark Licence Number: KM 593028

In respect of:BS EN 1452-2Plastic Piping Systems for Water Supply - Unplasticized Poly (Vinyl Chloride) PVC-U) Part 2:Pipes This issues the right and Licence to use the Kitemark in accordance with the Kitemark Terms and Conditionsgoverning the use of the Kitemark, as may be updated from time to time by BSI Assurance UK Ltd (the"Conditions"). All defined terms in this Licence shall have the same meaning as in the Conditions.

The use of the Kitemark is authorized in respect of the Product(s) detailed on this Licence provided at or from theabove address.

For and on behalf of BSI:


Page 1 of 2

Gary Fenton, Global Assurance Director



No. KM 593028


Page 2 of 2

BS EN ISO 1452-2:2009 - Plastics piping systems for water supply and for buried and above-grounddrainage and sewerage under pressure. Unplasticized poly(vinyl chloride)(PVC U). Pipes.

Nominal size andpressure class Socket formation

PN12 PN15

- ½”

Solvent cement socket for below 3 inch.

Elastomeric ring seal sockets or solvent cementsocket for 3 inch & above.

- ¾”

- 1”

- 1¼”

1½” 1½”

2” 2”

- 2½”

3” 3”

4” 4”

6” 6”

8” -

10” -

12” -

Notes

1. Materials used in the manufacture of these pipes are those tested in BSI test report 7913815.

2. Evidence was provided that the materials used in the production of these pipes in contact with drinking water are acceptable for use in the Middle East.

Ver

sion

3 -

Issu

e 4

- O

ctob

er 2

015

Documents

ISO 9001 FM 75767 - · PDF fileISO 4422-2 : 1996 (E) PVC-U Pipes for water supply-Superseded by ISO 1452-2 / BS EN ISO 1452 Nominal outside diameters dn and nominal wall thickness