ISO Update - International Organization for … Update, Supplement to ISO Focus -- December 2014 1 International Standards in process An International Standard is the result of an

ISO Update

Supplement to ISOFocus December 2014

ISO Update, Supplement to ISO Focus -- December 2014 1

International Standards in process

An International Standard is the result of an agreement between the member bodies of ISO. A first important step towards an Interna-tional Standard takes the form of a committee draft (CD) - this is cir-culated for study within an ISO technical committee. When consensus has been reached within the technical committee, the document is sent to the Central Secretariat for processing as a draft International Standard (DIS). The DIS requires approval by at least 75 % of the member bodies casting a vote. A confirmation vote is subsequently carried out on a final draft International Standard (FDIS), the approval criteria remaining the same.

CD registered

Period from 01 November to 30 November 2014

These documents are currently under consideration in the technical committee.

They have been registred at the Central Secretariat.

TC 17 Steel

ISO/CD 4829-1 Steel and cast iron — Determination of total silicon content — Reduced molybdosilicate spectrophotometric method — Part 1: Silicon contents between 0,05 and 1,0 %

ISO/CD 16120-1

Non-alloy steel wire rod for conversion to wire — Part 1: General requirements

ISO/CD 16120-2

Non-alloy steel wire rod for conversion to wire — Part 2: Specific requirements for general-purpose wire rod

ISO/CD 16120-4

Non-alloy steel wire rod for conversion to wire — Part 4: Specific requirements for wire rod for special applications

TC 28 Petroleum products and lubricants

ISO/CD TS 17306

Petroleum products — Biodiesel — Determina-tion of free and totalglycerin and mono-, di- and tracylglycerols by gas chromatography

ISO/CD TS 17307

Petroleum products — Biodiesel — De-termination of total esters content by gas chromatography

TC 37 Terminology and other language and content resources

ISO/CD 24623-1

Language resource management — Cor-pus Query Lingua Franca (CQLF) — Part 1: Metamodel

ISO/CD 18841 Interpreting — General guidelines

TC 43 Acoustics

ISO/CD 10140-4

Acoustics — Laboratory measurement of sound insulation of building elements — Part 4: Measurement procedures and requirements

TC 58 Gas cylinders

ISO/CD 17879 Gas cylinders — Self-closing cylinder valves — Specification and type testing

TC 70 Internal combustion engines

ISO/CD 4548-12

Methods of test for full-flow lubricating oil filters for internal combustion engines — Part 12: Filtration efficiency using particle counting, and contaminant retention capacity

TC 107 Metallic and other inorganic coatings

ISO/DTR 14232-2

Thermal spraying — Powders — Part 2: Comparison of coating performance and spray powder chemistry

TC 113 Hydrometry

ISO/CD 6416 Hydrometry — Measurement of discharge by the ultrasonic transit time (time of flight) method"

TC 118 Compressors and pneumatic tools, machines and equipment

ISO/CD 8573-2 Compressed air — Part 2: Test methods for oil aerosol content

TC 122 Packaging

ISO/CD 18616-1

Transport packaging — Reusable, rigid plastics distribution boxes — Part 1: General purpose application

ISO/CD 18616-2

Transport packaging — Reusable, rigid plastics distribution boxes — Part 2: General specifica-tions for testing

ISO/CD 19709-1

Packaging - Small load carrier systems — Part 1: Common requirements and test methods

ISO/DTS 19709-2

Packaging — Small Load Carrier Systems — Part 2: Column Stackable System (CSS)

ISO/DTS 19709-3

Packaging — Small Load Carrier Systems — Part 3: Bond Stackable System (BSS)

TC 131 Fluid power systems

ISO/CD 3968 Hydraulic fluid power — Filters — Evaluation of differential pressure versus flow characteristics

TC 138 Plastics pipes, fittings and valves for the transport of fluids

ISO/CD 21307 Plastics pipes and fittings — Butt fusion joint-ing procedures for polyethylene (PE) pipes and fittings used in the construction of gas and water distribution systems

TC 147 Water quality

ISO/CD 19040-1

Water quality — Determination of the estro-genic potential of water and waste water — Part 1: Yeast estrogen screen (Saccharomyces cerevisiae)

ISO/CD 19040-2

Water quality — Determination of the estrogen-ic potential of water and waste water — Part 2: Yeast estrogen screen (Arxula adeninivorans)

ISO/CD 19040-3

Water quality — Determination of the estrogen-ic potential of water and waste water — Part 3: In vitro human cell-based reporter gene assay

TC 150 Implants for surgery

ISO/CD 14708-3

Implants for surgery — Active implant-able medical devices — Part 3: Implantable neurostimulators

TC 165 Timber structures

ISO/CD 12122-3

Timber structures — Determination of char-acteristic values — Part 3: Glued laminated timber

ISO/CD 12122-4

Timber structures — Determination of char-acteristic values — Part 4: Engineered wood products

ISO/CD 19323 Timber structures — Joist hangers — Test methods

2 ISO Update, Supplement to ISO Focus -- December 2014

TC 172 Optics and photonics

ISO/CD 10110-7

Optics and photonics — Preparation of draw-ings for optical elements and systems — Part 7: Surface imperfection tolerances

ISO/CD 14997 Optics and photonics — Test methods for surface imperfections of optical elements

TC 173 Assistive products for persons with disability

ISO/CD 16840-2

Wheelchair seating — Part 2: Determination of physical and mechanical characteristics of devices intended to manage tissue integrity — Seat cushions

ISO/CD 19331 Urine absorbing aids — Test method for the determination of the absorption before leakage using an adult mannequin

TC 184 Automation systems and integration

ISO/CD 19649 Robots and robotic devices --- Vocabulary for mobile robots

ISO/CD 20140-5

Automation systems and integration — Evalu-ating energy efficiency and other factors of manufacturing systems that influence the environment — Part 5: Environmental influence evaluation data

TC 189 Ceramic tile

ISO/CD 10545-16

Ceramic tiles — Part 16: Determination of small colour differences

TC 190 Soil quality

ISO/CD 19258 Soil quality — Guidance on the determination of background values

TC 195 Building construction machinery and equipment

ISO/CD 19711-1

Building construction machinery and equip-ment - Truck mixers — Part 1: Terminology and commercial specifications

TC 202 Microbeam analysis

ISO/CD 19214 Guidelines for growth direction determination of wirelike crystals by transmission electron microscopy

TC 204 Intelligent transport systems

ISO/CD TR 18561-1

Intelligent transport systems — The use of personal ITS station for green transport infor-mation and management — Part 1: General information and use cases definition

ISO/CD 22179 Intelligent transport systems — Full speed range adaptive cruise control (FSRA) sys-tems — Performance requirements and test procedures

TC 205 Building environment design

ISO/CD 18566-4

Building environment design — Design, test methods and control of hydronic radiant heating and cooling panel systems — Part 4: Control of ceiling and cooling mounted radiant heating and cooling panels

TC 206 Fine ceramics

ISO/CD 18550 Fine Ceramics (Advanced ceramics, advanced technical ceramics) — Testing method for mac-roheterogeneity in microstructure

TC 210 Quality management and correspond-ing general aspects for medical devices

ISO/CD 15225 Medical devices — Quality management — Medical device nomenclature data structure

TC 215 Health informatics

ISO/DTS 17251

Health Informatics — Business requirements for a syntax to exchange structured dose infor-mation for medicinal products

ISO/DTS 19256

Health informatics — Requirements for medici-nal product dictionaries

ISO/DTS 19844

Health informatics — Identification of medicinal products — Implementation guide for data ele-ments and structures for the unique identifica-tion and exchange of regulated information on substances

TC 218 Timber

ISO/CD 13061-15

Physical and mechanical properties of wood — Test methods for small clear wood speci-mens — Part 15: Determination of radial and tangential swelling

ISO/CD 13061-16

Physical and mechanical properties of wood — Test methods for small clear wood speci-mens — Part 16: Determination of volumetric swelling

TC 219 Floor coverings

ISO/CD 20251 Textile floor coverings — Water impermeability test

ISO/CD 20253 Textile floor coverings — Blade test — Flocked textile floor covering with pile

TC 260 Human resource management

ISO/CD 30408 Human governance — Human dimension as a fundamental part of the overall corporate strategy — Guidelines

TC 270 Plastics and rubber machines

ISO/CD 20430 Plastics and rubber machines — Injection moulding machines — Safety requirements

JTC 1 Information technology

ISO/IEC CD 26513

Systems and software engineering - Re-quirements for testers and reviewers of user documentation

ISO/IEC 10373-6/PDAM 3

Identification cards — Test methods — Part 6: Proximity cards — Amendment 3: Active and passive PICC transmissions


Identification cards — Contactless integrated circuit cards — Proximity cards — Part 2: Radio frequency power and signal interface — Amendment 1: PICC's with external power supply

ISO/IEC CD 18328-3

Devices on cards — Part 3: Organization, secu-rity and commands for interchange


Information technology — High efficiency cod-ing and media delivery in heterogeneous envi-ronments — Part 3: 3D audio — Amendment 1: MPEG-H 3D Audio File Format Support


Information technology — Radio frequency identification for item management — Part 4: Parameters for air interface communications at 2,45 GHz — Amendment 1

ISO/IEC CD 19086-1

Information technology — Cloud computing — Service level agreement (SLA) framework and Technology — Part 1: Overview and concepts

ISO/IEC CD 30105-5

IT Enabled Services / Business Process Outsourcing Lifecycle Processes ITESBPO Standard — Part 5: Guidelines

DIS circulated


These documents have obtained substantial support within the ap-propriate ISO technical committee.


They have been submitted to the ISO member bodies for voting by the date shown.

* Available in English only

Vote terminates

REMCO Committee on reference materials

ISO/DGuide 31 * Reference materials — Contents of certificates, labels and ac-companying documentation

2015-03-08

(Revision of ISO Guide 31:2000)

TC 2 Fasteners

ISO/DIS 4759-3

* Tolerances for fasteners — Part 3: Washers for bolts, screws and nuts — Product grades A, C and F

2015-04-21

(Revision of ISO 4759-3:2000)

TC 8 Ships and marine technology

ISO/DIS 6042 * Ships and marine technology — Weathertight single-leaf steel doors

2015-02-26

(Revision of ISO 6042:1998)

TC 20 Aircraft and space vehicles

ISO/DIS 17540 * Space systems — Liquid rocket engines and test stands — Terms and definitions

2015-02-25

ISO/DIS 17546 * Space systems — Lithium ion battery for space vehi-cles — Design and verification requirements

2015-02-25

TC 21 Equipment for fire protec-tion and fire fighting

ISO/DIS 14520-2

* Gaseous fire-extinguishing sys-tems — Physical properties and system design — Part 2: CF3I extinguishant

2015-02-25


ISO/DIS 14520-5

* Gaseous fire-extinguishing systems — Physical properties and system design — Part 5: FK-5-1-12 extinguishant

2015-02-25


ISO/DIS 14520-6

* Gaseous fire-extinguishing sys-tems — Physical properties and system design — Part 6: HCFC Blend A extinguishant

2015-02-25


ISO/DIS 14520-8

* Gaseous fire-extinguishing sys-tems — Physical properties and system design — Part 8: HFC 125 extinguishant

2015-02-25


ISO/DIS 14520-9

* Gaseous fire-extinguishing sys-tems — Physical properties and system design — Part 9: HFC 227ea extinguishant

2015-02-25


ISO/DIS 14520-10

* Gaseous fire-extinguishing sys-tems — Physical properties and system design — Part 10: HFC 23 extinguishant

2015-02-25


ISO/DIS 14520-11

* Gaseous media fire-extinguish-ing systems — Physical proper-ties and system design — Part 11: HFC 236fa extinguishant

2015-02-25


ISO/DIS 21927-7

* Smoke and heat control systems — Part 7: Smoke ducts sections

2015-02-11

ISO/DIS 21927-8

* Smoke and heat control sys-tems — Part 8: Smoke control dampers

2015-02-11

TC 22 Road vehicles

ISO/DIS 10924-4

* Road vehicles — Circuit break-ers — Part 4: Medium circuit breakers with tabs (Blade type), Form CB15

2015-02-13


ISO/DIS 18300 * Electrically propelled road vehicles — Specifications for lithium-ion battery systems combined with lead acid battery or capacitor

2015-02-11

TC 35 Paints and varnishes

ISO/DIS 4623-2

* Paints and varnishes — Deter-mination of resistance to filiform corrosion — Part 2: Aluminium substrates

2015-04-14

(Revision of ISO 4623-2:2003, ISO 4623-2:2003/Cor 1:2005)

TC 38 Textiles

ISO/DIS 18596 Test method for staple length of dehaired cashmere — Hand-arranging method

2015-02-26

TC 39 Machine tools

ISO/DIS 19085-3

* Woodworking machines — Safety requirements — Part 3: NC boring and routing machines

2015-04-21

TC 41 Pulleys and belts (including veebelts)

ISO/DIS 19347 * Synchronous belt drives — Imperial pitch trapezoidal profile system — Belt and pulleys

2015-02-26

TC 44 Welding and allied processes

ISO/DIS 9013 * Thermal cutting — Classification of thermal cuts — Geometrical product specification and quality tolerances

2015-04-14


TC 45 Rubber and rubber products

ISO/DIS 2286-1

* Rubber- or plastics-coated fabrics — Determination of roll characteristics — Part 1: Meth-ods for determination of length, width and net mass

2015-04-28


ISO/DIS 7229 * Rubber- or plastics-coated fabrics — Measurement of gas permeability

2015-02-26


TC 46 Information and documentation


ISO/DIS 30302 * Information and documenta-tion — Management systems for records — Guidelines for implementation

2015-02-26

TC 58 Gas cylinders

ISO/DIS 11119-4.2

* Gas cylinders — Refillable com-posite gas cylinders — Design, construction and testing — Part 4: Fully wrapped fibre reinforced composite gas cylinders up to 450 L with load-sharing welded metallic liners

2015-01-25

TC 59 Buildings and civil engi-neering works

ISO/DIS 29481-1

* Building information models — Information delivery manual — Part 1: Methodology and format

2015-02-25


TC 67 Materials, equipment and offshore structures for pe-troleum, petrochemical and natural gas industries

ISO/DIS 17781 Petroleum, petrochemical and natural gas industries — Test methods for quality control of microstructure of austenitic/fer-ritic (duplex) stainless steel

2015-03-11

TC 68 Financial services

ISO/DIS 13491-1

* Banking — Secure crypto-graphic devices (retail) — Part 1: Concepts, requirements and evaluation methods

2015-02-14


ISO/DIS 13491-2

* Banking — Secure cryptographic devices (retail) — Part 2: Security compliance checklists for devic-es used in financial transactions

2015-02-14


TC 84 Devices for administration of medicinal products and catheters

ISO/DIS 6009 * Hypodermic needles for single use — Colour coding for identification

2015-04-21

(Revision of ISO 6009:1992, ISO 6009:1992/Cor 1:2008)

TC 85 Nuclear energy, nuclear technologies, and radio-logical protection

ISO/ASTM DIS 51026

* Practice for using the fricke reference-standard dosimetry system

2015-02-08

ISO/ASTM DIS 52303

* Guide for absorbed-dose map-ping in radiation processing facilities

2015-02-08

TC 94 Personal safety -- Pro-tective clothing and equipment

ISO/DIS 16973 * Respiratory protective devices — Classification for respiratory pro-tective device (RPD), excluding RPD for underwater application

2015-02-25

TC 104 Freight containers

ISO/DIS 9897-1

* Freight containers — Con-tainer equipment data exchange (CEDEX) — Part 1: General com-munication codes for general purpose containers

2015-02-06


ISO/DIS 9897-2

* Freight containers — Container equipment data exchange (CE-DEX) — -- Part 2: Refrigerated containers

2015-02-06


ISO/DIS 9897-6

* Freight containers — Container equipment data exchange (CE-DEX) — Part 6: Message sets for data transfer between local computer and host computer

2015-02-06


TC 107 Metallic and other inorgan-ic coatings

ISO/DIS 2178 * Non-magnetic coatings on mag-netic substrates — Measurement of coating thickness — Magnetic method

2015-04-28


TC 108 Mechanical vibration, shock and condition monitoring

ISO/DIS 16063-43

Methods for the calibration of vibration and shock transduc-ers — Part 43: Calibration of accelerometers by model-based parameter identification

2015-02-13

TC 110 Industrial trucks

ISO/DIS 10896-4.2

Rough-terrain trucks — Safety requirements and verification — Part 4: Additional requirements for variable reach trucks handling freely suspended loads

2015-01-15

TC 113 Hydrometry

ISO/DIS 24155 * Hydrometry — Hydrometric data transmission systems — Specifi-cation of system requirements

2015-02-06

(Revision of ISO/TS 24155:2007)


ISO/DIS 17902 * Wrapped electrofoaming joints for PE piping systems with smooth outer wall for gravity drains and sewers

2015-02-25


ISO/DIS 14490-3

* Optics and photonics — Test methods for telescopic sys-tems — Part 3: Test methods for telescopic sights

2015-02-26


TC 174 Jewellery

ISO/DIS 8653 * Jewellery — Ring-sizes — Definition, measurement and designation

2015-02-21


TC 180 Solar energy


ISO/DIS 22975-1

* Solar energy — Collector com-ponents and materials — Part 1: Evacuated tubes — Durability and performance

2015-04-14

ISO/DIS 22975-2

* Solar energy — Collector com-ponents and materials — Part 2: Heat-pipe for solar thermal application — Durability and performance

2015-04-14

TC 188 Small craft

ISO/DIS 8666 * Small craft — Principal data

2015-04-21


TC 190 Soil quality

ISO/DIS 17183 * Soil quality — Screening soils for isopropanol-extractable organic compounds by determining emulsification index by light attenuation

2015-02-25


ISO/DIS 14296 * Intelligent transport systems — Extension of map database specifications for applications of cooperative ITS

2015-02-13

ISO/DIS 24102-2

* Intelligent transport systems — Communications access for land mobiles (CALM) — ITS station management — Part 2: Remote management of ITS-SCUs

2015-02-14


IULTCS International Union of Leather Technologists and Chemists Societies

ISO/DIS 20137 * Leather — Checical tests — Guidelins for testing critical chemicals in leather

2015-04-28


ISO/IEC DIS 18745-2

Test methods for machine read-able travel documents (MRTD) and associated readers — Part 2: Test methods for the contact-less interface

2015-02-18

ISO/IEC 14496-4:2004/DAmd 43

Information technology — Cod-ing of audio-visual objects — Part 4: Conformance testing — Amendment 43: 3D-AVC conformance testing

2015-02-13

ISO/IEC 14496-12:2012/DAmd 4

Information technology — Cod-ing of audio-visual objects — Part 12: ISO base media file format — Amendment 4

2015-02-13

ISO/IEC 15444-12:2012/DAmd 4

Information technology — JPEG 2000 image coding system — Part 12: ISO base media file for-mat — Amendment 4: Improved audio support

2015-02-13

ISO/IEC DIS 11179-1

Information technology — Meta-data registries (MDR) — Part 1: Framework

2015-02-06

(Revision of ISO/IEC 11179-1:2004)

ISO/IEC 19794-5:2011/DAmd 2

* Information technology — Bio-metric data interchange formats — Part 5: Face image data — Amendment 2: XML encoding and clarification of defects

2015-02-13

FDIS circulated


These Final draft International Standards have been submitted to the ISO member bodies for formal approval by the date shown


Vote terminates

TC 6 Paper, board and pulps

ISO/FDIS 699 * Pulps — Determination of alkali resistance

2015-01-06


ISO/FDIS 3260 * Pulps — Determination of chlorine consumption (Degree of delignification)

2015-01-15


TC 17 Steel

ISO/FDIS 16124

* Steel wire rod — Dimensions and tolerances

2015-01-10


TC 22 Road vehicles

ISO/FDIS 6621-4

* Internal combustion engines — Piston rings — Part 4: General specifications

2015-01-05


ISO/FDIS 10924-3

* Road vehicles — Circuit break-ers — Part 3: Miniature circuit breakers with tabs (Blade type), Form CB11

2015-01-05

ISO/FDIS 27145-6

* Road vehicles — Implementation of World-Wide Harmonized On-Board Diagnostics (WWH-OBD) communication requirements — Part 6: External test equipment

2015-01-05

ISO/FDIS 17840-1

* Road vehicles — Information for first and second responders — Part 1: Rescue sheet for pas-senger cars and light commercial vehicles

2015-01-18

ISO/FDIS 12617

* Road vehicles — Liquefied natu-ral gas (LNG) refuelling connec-tor — 3,1 MPa connector

2015-01-15

TC 23 Tractors and machinery for agriculture and forestry

ISO/FDIS 16122-1.2

Agricultural and forestry machin-ery — Inspection of sprayers in use — Part 1: General

2015-01-21

ISO 8084:2003/FDAmd 1

* Machinery for forestry — Opera-tor protective structures — Lab-oratory tests and performance requirements — Amendment 1

2015-01-29


ISO/FDIS 15639-1

* Radio frequency identification of animals — Standardization of injection sites for different animal species — Part 1: Companion animals (cats and dogs)

2015-01-03

TC 34 Food products

ISO/FDIS 6647-1

* Rice — Determination of amyl-ose content — Part 1: Reference method

2015-01-07


ISO/FDIS 6647-2

* Rice — Determination of amyl-ose content — Part 2: Routine methods

2015-01-07


TC 38 Textiles

ISO/FDIS 18074

* Textiles — Identification of some animal fibres by DNA analysis method — Cashmere, wool, yak and their blends

2015-01-27

ISO/FDIS 18103

* Superfine woven wool fabric labelling — Requirements for Super S code definition

2015-01-07

TC 43 Acoustics

ISO/FDIS 9295 * Acoustics — Determination of high-frequency sound power levels emitted by machinery and equipment

2015-01-21


TC 44 Welding and allied processes

ISO 11745:2010/FDAmd 1

* Brazing for aerospace applica-tions — Qualification test for brazers and brazing operators — Brazing of metallic components — Amendment 1

2015-01-27

TC 61 Plastics

ISO 899-2:2003/FDAmd 1

* Plastics — Determination of creep behaviour — Part 2: Flex-ural creep by three-point loading — Amendment 1

2015-01-14

ISO/FDIS 16012

* Plastics — Determination of line-ar dimensions of test specimens

2015-01-05


ISO/FDIS 13927

* Plastics — Simple heat release test using a conical radiant heater and a thermopile detector

2015-01-21


TC 67 Materials, equipment and offshore structures for pe-troleum, petrochemical and natural gas industries

ISO/FDIS 17945

* Petroleum, petrochemical and natural gas industries — Metal-lic materials resistant to sulfide stress cracking in corrosive petroleum refining environments

2015-01-07

TC 84 Devices for administration of medicinal products and catheters

ISO/FDIS 10555-6.2

* Intravascular catheters — Sterile and single-use catheters — Part 6: Subcutaneous implanted ports

2015-01-26

TC 91 Surface active agents

ISO/FDIS 16560

* Surface active agents — Deter-mination of polyethylene glycol content in nonionic ethoxylated surfactants — HPLC method

2015-01-20

ISO/FDIS 17280

* Surface active agents — De-termination of 1,4-dioxan residues in surfactants obtained from epoxyethane by gas chromatography

2015-01-26

TC 92 Fire safety

ISO/FDIS 5660-1

* Reaction-to-fire tests — Heat release, smoke production and mass loss rate — Part 1: Heat release rate (cone calorimeter method) and smoke production rate (dynamic measurement)

2015-01-06


TC 94 Personal safety -- Pro-tective clothing and equipment

ISO/FDIS 11612

* Protective clothing — Cloth-ing to protect against heat and flame — Minimum performance requirements

2015-01-14


TC 96 Cranes

ISO/FDIS 9928-1

* Cranes — Crane operating manual — Part 1: General

2015-01-25


TC 117 Fans

ISO/FDIS 13350

* Fans — Performance testing of jet fans

2015-01-21

(Revision of ISO 13350:1999, ISO 13350:1999/DAmd 1)

TC 135 Non-destructive testing

ISO/FDIS 16946

* Non-destructive testing — Ultra-sonic testing — Specification for step wedge calibration block

2015-01-07

ISO/FDIS 18563-1

* Non-destructive testing — Char-acterization and verification of ultrasonic phased array equip-ment — Part 1: Instruments

2015-01-21


ISO 4427-1:2007/FDAmd 1

* Plastics piping systems — Poly-ethylene (PE) pipes and fittings for water supply — Part 1: General — Amendment 1: Melt mass-flow rate (MFR) for PE 80 and PE 100

2015-01-05

TC 147 Water quality

ISO/FDIS 13164-4

* Water quality — Radon-222 — Part 4: Test method using two-phase liquid scintillation counting

2015-01-18

TC 153 Valves

ISO/FDIS 15848-1

* Industrial valves — Measure-ment, test and qualification procedures for fugitive emissions — Part 1: Classification system and qualification procedures for type testing of valves

2015-01-07



ISO/FDIS 15848-2

* Industrial valves — Measure-ment, test and qualification procedures for fugitive emissions — Part 2: Production accept-ance test of valves

2015-01-07


TC 159 Ergonomics

ISO/FDIS 9241-392

* Ergonomics of human-system interaction — Part 392: Ergo-nomic recommendations for the reduction of visual fatigue from stereoscopic images

2015-01-27


ISO/FDIS 9022-11

* Optics and photonics — Envi-ronmental test methods — Part 11: Mould growth

2015-01-15


ISO/FDIS 9022-12

* Optics and photonics — Envi-ronmental test methods — Part 12: Contamination

2015-01-15


ISO/FDIS 9022-14

* Optics and photonics — Envi-ronmental test methods — Part 14: Dew, hoarfrost, ice

2015-01-15


ISO/FDIS 9022-17

* Optics and photonics — Envi-ronmental test methods — Part 17: Combined contamination, solar radiation

2015-01-15


ISO/FDIS 11151-1

* Lasers and laser-related equip-ment — Standard optical com-ponents — Part 1: Components for the UV, visible and near-infra-red spectral ranges

2015-01-28


ISO/FDIS 11151-2

* Lasers and laser-related equip-ment — Standard optical com-ponents — Part 2: Components for the infrared spectral range

2015-01-21


TC 201 Surface chemical analysis

ISO/FDIS 18118

* Surface chemical analysis — Auger electron spectroscopy and X-ray photoelectron spec-troscopy — Guide to the use of experimentally determined relative sensitivity factors for the quantitative analysis of homoge-neous materials

2015-01-20


TC 213 Dimensional and geometri-cal product specifications and verification

ISO/FDIS 16610-1

* Geometrical product specifica-tions (GPS) — Filtration — Part 1: Overview and basic concepts

2015-01-07

(Revision of ISO/TS 16610-1:2006)

ISO/FDIS 16610-20

* Geometrical product specifica-tions (GPS) — Filtration — Part 20: Linear profile filters: Basic concepts

2015-01-07


ISO/FDIS 16610-29

* Geometrical product specifica-tions (GPS) — Filtration — Part 29: Linear profile filters: Spline wavelets

2015-01-07


ISO/FDIS 16610-40

* Geometrical product specifica-tions (GPS) — Filtration — Part 40: Morphological profile filters: Basic concepts

2015-01-21


ISO/FDIS 16610-41

* Geometrical product specifica-tions (GPS) — Filtration — Part 41: Morphological profile filters: Disk and horizontal line-segment filters

2015-01-07


ISO/FDIS 16610-49

* Geometrical product specifica-tions (GPS) — Filtration — Part 49: Morphological profile filters: Scale space techniques

2015-01-07


ISO/FDIS 16610-61

* Geometrical Product Specifica-tion (GPS) — Filtration — Part 61: Linear areal filters — Gaussian filters

2015-01-21

ISO/FDIS 25178-606

* Geometrical product specifica-tion (GPS) — Surface texture: Areal — Part 606: Nominal char-acteristics of non-contact (focus variation) instruments

2015-01-21

TC 238 Solid biofuels

ISO/FDIS 16967

* Solid biofuels — Determination of major elements

2015-01-28

IULTCS International Union of Leather Technologists and Chemists Societies

ISO/FDIS 15701

* Leather — Tests for colour fastness — Colour fastness to migration into polymeric material

2015-01-21


ISO/FDIS 17234-1

* Leather — Chemical tests for the determination of certain azo colorants in dyed leathers — Part 1: Determination of certain aromatic amines derived from azo colorants

2015-01-14


ISO/FDIS 18218-1

* Leather — Determination of ethoxylated alkylphenols — Part 1: Direct method

2015-01-28

ISO/FDIS 18218-2

* Leather — Determination of ethoxylated alkylphenols — Part 2: Indirect method

2015-01-28


ISO/IEC/IEEE FDIS 15288

* Systems and software engi-neering — System life cycle processes

2015-01-28

(Revision of ISO/IEC 15288:2008)


ISO/IEC 23008-1:2014/FDAmd 1

* Information technology — High efficiency coding and media de-livery in heterogeneous environ-ments — Part 1: MPEG media transport (MMT) — Amendment 1: Additional technologies for MPEG Media Transport (MMT)

2015-01-08

ISO/IEC FDIS 30113-1

* Information technology — User interface — Gesture-based interfaces across devices and methods — Part 1: Framework

2015-01-26

ISO/IEC 19795-2:2007/FDAmd 1

* Information technology — Bio-metric performance testing and reporting — Part 2: Testing methodologies for technol-ogy and scenario evalua-tion — Amendment 1: Test-ing of multimodal biometric implementations

2015-01-20

Standards published

New International Standards published between 01 November and 30 November 2014


** French version of standard previously published in English only

Price

group


ISO 8784-1:2014

Pulp, paper and board — Microbiologi-cal examination — Part 1: Enumeration of bacteria and bacterial spores based on disintegration

C


ISO 7236:2014 * Ships and marine technology — Inland navigation vessels — Mounting attach-ments for demountable signal masts for push-tows

B

ISO 14886:2014

Ships and marine technology — Large yachts — Structural fire protection for FRP yachts

B

TC 10 Technical product documentation

IEC 82045-2:2004/Cor 1:2014

* Document management — Part 2: Metadata elements and information reference model — Technical Corrigen-dum 1

free

ISO/TR 16310:2014

* Symbol libraries for construction and facilities management

C

TC 17 Steel

ISO 683-3:2014

* Heat-treatable steels, alloy steels and free-cutting steels — Part 3: Case-hardening steels

F

ISO 683-5:2014

* Heat treatable steels, alloy steels and free-cutting steels — Part 5: Nitriding steels

E


ISO 7169:2014 * Aerospace — Separable tube fittings for fluid systems, for 24 degree cones, for pressures up to 3 000 psi or 21 000 kPa — Procurement specification, inch/metric

D

TC 22 Road vehicles

ISO 8820-1:2014

* Road vehicles — Fuse-links — Part 1: Definitions and general test requirements

B

ISO 16845-2:2014

* Road vehicles — Controller area network (CAN) conformance test plan — Part 2: High-speed medium access unit with selective wake-up functionality

H

ISO/TS 17536-3:2014

* Road vehicles — Aerosol separator performance test for internal com-bustion engines — Part 3: Method to perform engine gravimetric test

B

ISO 18418-1:2014

* Gasoline engines — Medium pressure liquid fuel supply connections — Part 1: 60° female cone connectors

A

ISO 18418-2:2014

* Gasoline engines — Medium pressure liquid fuel supply connections — Part 2: Pipe assemblies

B

ISO 6460-2:2014

* Motorcycles — Measurement method for gaseous exhaust emissions and fuel consumption — Part 2: Test cycles and specific test conditions

G

TC 23 Tractors and machinery for agri-culture and forestry

ISO 23205:2014

* Agricultural tractors — Instructional seat

A

ISO 4254-13:2012

* Agricultural machinery — Safety — Part 13: Large rotary mowers

F

ISO 9635-1:2014

* Agricultural irrigation equipment — Irrigation valves — Part 1: General requirements

D

ISO 9635-2:2014

* Agricultural irrigation equipment — Irri-gation valves — Part 2: Isolating valves

C

ISO 9635-3:2014

* Agricultural irrigation equipment — Ir-rigation valves — Part 3: Check valves

B

ISO 9635-4:2014

* Agricultural irrigation equipment — Ir-rigation valves — Part 4: Air valves

C

TC 24 Particle characterization includ-ing sieving

ISO 13317-4:2014

* Determination of particle size distribu-tion by gravitational liquid sedimen-tation methods — Part 4: Balance method

C

TC 28 Petroleum products and lubricants


ISO 17196:2014

* Dimethyl ether (DME) for fuels — Determination of impurities — Gas chromatographic method

D

ISO 17197:2014

* Dimethyl ether (DME) for fuels — Determination of water content — Karl Fischer titration method

B

ISO 17198:2014

Dimethyl ether (DME) for fuels — De-termination of total sulfur, ultraviolet fluorescence method

C

TC 34 Food products

ISO 11133:2014

Microbiology of food, animal feed and water — Preparation, production, stor-age and performance testing of culture media

H

ISO 12966-1:2014

Animal and vegetable fats and oils — Gas chromatography of fatty acid methyl esters — Part 1: Guidelines on modern gas chromatography of fatty acid methyl esters

B


ISO 13611:2014

Interpreting — Guidelines for commu-nity interpreting

C

TC 38 Textiles

ISO 17617:2014

Textiles — Determination of moisture drying rate

D

ISO 675:2014 Textiles — Woven fabrics — Deter-mination of dimensional change on commercial laundering near the boiling point

A

TC 39 Machine tools

ISO 10791-7:2014

* Test conditions for machining centres — Part 7: Accuracy of finished test pieces

D

ISO 11090-1:2014

* Test conditions for die sinking electro-discharge machines (die sinking EDM) — Testing of the accuracy — Part 1: Single-column machines (cross-slide table type and fixed-table type)

D

ISO 11090-2:2014

* Test conditions for die sinking electro-discharge machines (die sinking EDM) — Testing of the accuracy — Part 2: Double-column machines (slide-head type)

D

ISO/TR 17243-1:2014

* Machine tool spindles — Evaluation of machine tool spindle vibrations by measurements on spindle housing — Part 1: Spindles with rolling element bearings and integral drives operating at speeds between 600 min-1 and 30 000 min-1

C

TC 41 Pulleys and belts (including veebelts)

ISO 13050:2014

* Synchronous belt drives — Metric pitch, curvilinear profile systems G, H, R and S, belts and pulleys

G

TC 42 Photography

ISO 18943:2014

* Imaging materials — Magnetic hard drives used for image storage — Care and handling

C

TC 43 Acoustics

ISO 17497-1:2004/Amd 1:2014

* Acoustics — Sound-scattering proper-ties of surfaces — Part 1: Measure-ment of the random-incidence scatter-ing coefficient in a reverberation room — Amendment 1

XZ

TC 45 Rubber and rubber products

ISO 18064:2014

Thermoplastic elastomers — Nomen-clature and abbreviated terms

A

ISO 815-2:2014

Rubber, vulcanized or thermoplastic — Determination of compression set — Part 2: At low temperatures

C

ISO 11346:2014

Rubber, vulcanized or thermoplastic — Estimation of life-time and maximum temperature of use

B

ISO 5794-2:2014

* Rubber compounding ingredients — Silica, precipitated, hydrated — Part 2: Evaluation procedures in styrene-butadiene rubber

A

TC 46 Information and documentation

ISO 10161-1:2014

* Information and documentation — Open Systems Interconnection — Interlibrary Loan Application Protocol Specification — Part 1: Protocol specification

H

ISO/TS 28560-4:2014

* Information and documentation — RFID in libraries — Part 4: Encoding of data elements based on rules from ISO/IEC 15962 in an RFID tag with partitioned memory

G

TC 60 Gears

ISO/TR 15144-1:2014

Calculation of micropitting load ca-pacity of cylindrical spur and helical gears — Part 1: Introduction and basic principles

E

ISO/TR 15144-2:2014

Calculation of micro-pitting load capacity of cylindrical spur and helical gears — Part 2: Examples of calcula-tion for micropitting

F

TC 61 Plastics

ISO 19065-1:2014

Plastics — Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials — Part 1: Designation system and basis for specifications

B

TC 67 Materials, equipment and off-shore structures for petroleum, petrochemical and natural gas industries

ISO 13503-6:2014

Petroleum and natural gas industries — Completion fluids and materials — Part 6: Procedure for measuring leakoff of completion fluids under dynamic conditions

C

ISO 19901-8:2014

* Petroleum and natural gas industries — Specific requirements for offshore structures — Part 8: Marine soil investigations

H

TC 68 Financial services

ISO 9362:2014 * Banking — Banking telecommunica-tion messages — Business identifier code (BIC)

A



ISO 7967-10:2014

* Reciprocating internal combustion engines — Vocabulary of compo-nents and systems — Part 10: Ignition systems

B

ISO 7967-12:2014

* Reciprocating internal combustion engines — Vocabulary of components and systems — Part 12: Exhaust emis-sion control systems

B

TC 72 Textile machinery and accessories

ISO 93-2:2006/Amd 1:2014

* Textile machinery and accessories — Cylindrical sliver cans — Part 2: Spring bottoms — Amendment 1

XZ

TC 85 Nuclear energy, nuclear tech-nologies, and radiological protection

ISO 17099:2014

* Radiological protection — Performance criteria for laboratories using the cy-tokinesis block micronucleus (CBMN) assay in peripheral blood lymphocytes for biological dosimetry

E

TC 86 Refrigeration and air-conditioning

ISO 16494:2014

* Heat recovery ventilators and energy recovery ventilators — Method of test for performance

F

TC 108 Mechanical vibration, shock and condition monitoring

ISO 16063-22:2005/Amd 1:2014

* Methods for the calibration of vibration and shock transducers — Part 22: Shock calibration by comparison to a reference transducer — Amendment 1

XZ

TC 113 Hydrometry

ISO 4375:2014 Hydrometry — Cableway systems for stream gauging

D

ISO/TR 13973:2014

* Artificial recharge to groundwater

E


ISO 8132:2014 Hydraulic fluid power — Mounting di-mensions for accessories for single rod cylinders, 16 MPa (160 bar) medium and 25 MPa (250 bar) series

C

ISO 8133:2014 Hydraulic fluid power — Mounting di-mensions for accessories for single rod cylinders, 16 MPa (160 bar) compact series

C

ISO/TR 16386:2014

* Impact of changes in ISO fluid power particle counting — Contamination control and filter test standards

C

TC 146 Air quality

ISO 16000-20:2014

* Indoor air — Part 20: Detection and enumeration of moulds — Determina-tion of total spore count

C


ISO 8828:2014 * Implants for surgery — Guidance on care and handling of orthopaedic implants

A

TC 154 Processes, data elements and documents in commerce, indus-try and administration

ISO 14533-1:2014

* Processes, data elements and documents in commerce, industry and administration — Long term signature profiles — Part 1: Long term signature profiles for CMS Advanced Electronic Signatures (CAdES)

D

TC 157 Non-systemic contraceptives and STI barrier prophylactics

ISO 8009:2014 * Mechanical contraceptives — Reus-able natural and silicone rubber contra-ceptive diaphragms — Requirements and tests

D

TC 163 Thermal performance and en-ergy use in the built environment

ISO 29467:2008/Amd 1:2014

* Thermal insulating products for build-ing applications — Determination of squareness — Amendment 1

XZ

ISO 29471:2008/Amd 1:2014

* Thermal insulating products for build-ing applications — Determination of dimensional stability under constant normal laboratory conditions (23 degrees C/50 % relative humidity) — Amendment 1

XZ

ISO 29472:2008/Amd 1:2014

* Thermal insulating products for build-ing applications — Determination of dimensional stability under specified temperature and humidity conditions — Amendment 1

XZ

ISO 29767:2008/Amd 1:2014

* Thermal insulating products for build-ing applications — Determination of short-term water absorption by partial immersion — Amendment 1

XZ

ISO 29771:2008/Amd 1:2014

* Thermal insulating materials for build-ing applications — Determination of organic content — Amendment 1

XZ


ISO 14132-3:2014

* Optics and photonics — Vocabulary for telescopic systems — Part 3: Terms for telescopic sights

A

TC 173 Assistive products for persons with disability

ISO 7176-8:2014

* Wheelchairs — Part 8: Requirements and test methods for static, impact and fatigue strengths

G

TC 174 Jewellery

ISO 9202:2014 * Jewellery — Fineness of precious metal alloys

A

ISO 11210:2014

* Jewellery — Determination of platinum in platinum jewellery alloys — Gravi-metric method after precipitation of diammonium hexachloroplatinate

A

ISO 11426:2014

* Jewellery — Determination of gold in gold jewellery alloys — Cupellation method (fire assay)

B

ISO 11494:2014

Jewellery — Determination of platinum in platinum jewellery alloys — ICP-OES method using yttrium as internal standard element

B

ISO 11495:2014

* Jewellery — Determination of pal-ladium in palladium jewellery alloys — ICP-OES method using yttrium as internal standard element

B

TC 182 Geotechnics


ISO 17892-1:2014

* Geotechnical investigation and testing — Laboratory testing of soil — Part 1: Determination of water content

B

ISO 17892-2:2014

* Geotechnical investigation and testing — Laboratory testing of soil — Part 2: Determination of bulk density

C

TC 183 Copper, lead, zinc and nickel ores and concentrates

ISO 13547-2:2014

* Copper, lead, zinc and nickel sulfide concentrates — Determination of arsenic — Part 2: Acid digestion and inductively coupled plasma atomic emission spectrometric method

C

TC 184 Automation systems and integration

ISO/TS 10303-1001:2014

* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1001: Application module: Appearance assignment

B

ISO/TS 10303-1002:2014

* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1002: Application module: Colour

B

ISO/TS 10303-1003:2014

* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1003: Ap-plication module: Curve appearance

B

ISO/TS 10303-1004:2014

* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1004: Ap-plication module: Elemental geometric shape

B

ISO/TS 10303-1005:2014

* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1005: Ap-plication module: Elemental topology

B

ISO/TS 10303-1008:2014

* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1008: Ap-plication module: Layer assignment

B

ISO/TS 10303-1010:2014

* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1010: Application module: Date time

B

ISO/TS 10303-1014:2014

* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1014: Appli-cation module: Date time assignment

B

ISO/TS 10303-1022:2014

* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1022: Application module: Part and version identification

B

ISO/TS 10303-1023:2014

* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1023: Ap-plication module: Part view definition

B

ISO/TS 10303-1026:2014

* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1026: Ap-plication module: Assembly structure

B

ISO/TS 10303-1027:2014

* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1027: Application module: Contextual shape positioning

B

ISO/TS 10303-1030:2014

* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1030: Appli-cation module: Property assignment

B

ISO/TS 10303-1032:2014

* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1032: Application module: Shape property assignment

B

ISO/TS 10303-1033:2014

* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1033: Ap-plication module: External model

B

ISO/TS 10303-1034:2014

* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1034: Appli-cation module: Product view definition properties

B

ISO/TS 10303-1041:2014

* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1041: Appli-cation module: Product view definition relationship

B

ISO/TS 10303-1042:2014

* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1042: Application module: Work request

B

ISO/TS 10303-1043:2014

* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1043: Application module: Work order

B

ISO/TS 10303-1047:2014

* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1047: Application module: Activity

B

ISO/TS 10303-1049:2014

* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1049: Ap-plication module: Activity method

B

ISO/TS 10303-1050:2014

* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1050: Appli-cation module: Dimension tolerance

B

ISO/TS 10303-1051:2014

* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1051: Appli-cation module: Geometric tolerance

B

ISO/TS 10303-1052:2014

* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1052: Ap-plication module: Default tolerance

B

ISO/TS 10303-1054:2014

* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1054: Ap-plication module: Value with unit

B

ISO/TS 10303-1057:2014

* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1057: Application module: Effectivity

B

ISO/TS 10303-1059:2014

* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1059: Appli-cation module: Effectivity application

B

ISO/TS 10303-1061:2014

* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1061: Application module: Project

B

ISO/TS 10303-1063:2014

* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1063: Ap-plication module: Product occurrence

B


ISO/TS 10303-1068:2014

* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1068: Application module: Constructive solid geometry 3D

B

ISO/TS 10303-1070:2014

* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1070: Application module: Class

B

ISO/TS 10303-1103:2014

* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1103: Application module: Product class

B

ISO/TS 10303-1104:2014

* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1104: Ap-plication module: Specified product

B

ISO/TS 10303-1106:2014

* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1106: Application module: Extended measure representation

B

ISO/TS 10303-1108:2014

* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1108: Ap-plication module: Specification based configuration

B

ISO/TS 10303-1109:2014

* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1109: Ap-plication module: Alternative solution

B

ISO/TS 10303-1110:2014

* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1110: Ap-plication module: Surface conditions

B

ISO/TS 10303-1111:2014

* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1111: Application module: Classification with attributes

B

ISO/TS 10303-1112:2014

* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1112: Appli-cation module: Specification control

B

ISO/TS 10303-1114:2014

* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1114: Application module: Classification assignment

B

ISO/TS 10303-1115:2014

* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1115: Ap-plication module: Part collection

B

ISO/TS 10303-1121:2014

* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1121: Application module: Document and version identification

B

ISO/TS 10303-1122:2014

* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1122: Appli-cation module: Document assignment

B

ISO/TS 10303-1126:2014

* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1126: Appli-cation module: Document properties

B

ISO/TS 10303-1130:2014

* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1130: Appli-cation module: Derived shape element

B

ISO/TS 10303-1131:2014

* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1131: Appli-cation module: Construction geometry

B

ISO/TS 10303-1132:2014

* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1132: Ap-plication module: Associative text

B

ISO/TS 10303-1136:2014

* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1136: Ap-plication module: Text appearance

B

ISO/TS 10303-1141:2014

* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1141: Application module: Requirement view definition

B

ISO/TS 10303-1142:2014

* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1142: Application module: Requirement view definition relationship

B

ISO/TS 10303-1147:2014

* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1147: Application module: Manufacturing configuration effectivity

B

ISO/TS 10303-1206:2014

* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1206: Appli-cation module: Draughting annotation

B

ISO/TS 10303-1231:2014

* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1231: Application module: Product data management

B

ISO/TS 10303-1246:2014

* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1246: Appli-cation module: Attribute classification

B

ISO/TS 10303-1248:2014

* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1248: Ap-plication module: Product breakdown

B

ISO/TS 10303-1275:2014

* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1275: Ap-plication module: External class

B

ISO/TS 10303-1288:2014

* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1288: Appli-cation module: Management resource information

B

ISO/TS 10303-1309:2014

* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1309: Ap-plication module: Drawing definition

B

ISO/TS 10303-1311:2014

* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1311: Appli-cation module: Associative draughting elements

B

ISO/TS 10303-1312:2014

* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1312: Ap-plication module: Draughting element specialisations

B

ISO/TS 10303-1316:2014

* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1316: Ap-plication module: Camera view 3D

B


ISO/TS 10303-1317:2014

* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1317: Application module: Procedural shape model

B

ISO/TS 10303-1319:2014

* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1319: Application module: Solid with local modification

B

ISO/TS 10303-1320:2014

* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1320: Appli-cation module: Thickened face solid

B

ISO/TS 10303-1323:2014

* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1323: Application module: Basic geometric topology

B

ISO/TS 10303-1341:2014

* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1341: Ap-plication module: Generic expression

B

ISO/TS 10303-1342:2014

* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1342: Application module: Expression

B

ISO/TS 10303-1343:2014

* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1343: Ap-plication module: Product placement

B

ISO/TS 10303-1344:2014

* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1344: Ap-plication module: Numerical interface

B

ISO/TS 10303-1345:2014

* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1345: Application module: Item definition structure

B

ISO/TS 10303-1346:2014

* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1346: Ap-plication module: Numeric function

B

ISO/TS 10303-1349:2014

* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1349: Application module: Incomplete data reference mechanism

B

ISO/TS 10303-1350:2014

* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1350: Appli-cation module: Inertia characteristics

B

ISO/TS 10303-1362:2014

* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1362: Application module: Dimension and tolerance callouts

B

ISO/TS 10303-1372:2014

* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1372: Application module: Analysis

B

ISO/TS 10303-1373:2014

* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1373: Application module: Analysis product relationships

B

ISO/TS 10303-1374:2014

* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1374: Ap-plication module: Analysis shape

B

ISO/TS 10303-1375:2014

* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1375: Ap-plication module: Cfd conditions

B

ISO/TS 10303-1376:2014

* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1376: Ap-plication module: Cfd equations

B

ISO/TS 10303-1377:2014

* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1377: Application module: Cfd model

B

ISO/TS 10303-1378:2014

* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1378: Application module: Cfd results

B

ISO/TS 10303-1379:2014

* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1379: Ap-plication module: Cfd specified general property

B

ISO/TS 10303-1380:2014

* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1380: Application module: Fea definition relationships

B

ISO/TS 10303-1381:2014

* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1381: Appli-cation module: Finite element analysis

B

ISO/TS 10303-1382:2014

* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1382: Appli-cation module: Finite element shape

B

ISO/TS 10303-1383:2014

* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1383: Ap-plication module: Finite elements

B

ISO/TS 10303-1384:2014

* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1384: Ap-plication module: Mesh connectivity

B

ISO/TS 10303-1385:2014

* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1385: Ap-plication module: Mesh function

B

ISO/TS 10303-1386:2014

* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1386: Ap-plication module: Mesh topology

B

ISO/TS 10303-1387:2014

* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1387: Ap-plication module: Product analysis

B

ISO/TS 10303-1403:2014

* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1403: Application module: Geometric model relationship

B

ISO/TS 10303-1453:2014

* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1453: Application module: Function based behaviour

B

ISO/TS 10303-1470:2014

* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1470: Application module: Parameter value specification

B


ISO/TS 10303-1491:2014

* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1491: Appli-cation module: Expression assignment

B

ISO/TS 10303-1507:2014

* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1507: Application module: Geometrically bounded surface

B

ISO/TS 10303-1509:2014

* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1509: Ap-plication module: Manifold surface

B

ISO/TS 10303-1511:2014

* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1511: Appli-cation module: Topologically bounded surface

B

ISO/TS 10303-1520:2014

* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1520: Ap-plication module: Product data quality definition

B

ISO/TS 10303-1521:2014

* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1521: Ap-plication module: Poduct data quality criteria

B

ISO/TS 10303-1522:2014

* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1522: Ap-plication module: Product data quality inspection result

B

ISO/TS 10303-1523:2014

* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1523: Application module: Shape data quality criteria

B

ISO/TS 10303-1524:2014

* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1524: Shape data quality inspection result

B

ISO/TS 10303-1525:2014

* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1525: Ap-plication module: Composite surface

B

ISO/TS 10303-1526:2014

* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1526: Ap-plication module: Numeric expression

B

ISO/TS 10303-1527:2014

* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1527: Ap-plication module: Elementary function

B

ISO/TS 10303-1601:2014

* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1601: Ap-plication module: Altered package

B

ISO/TS 10303-1603:2014

* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1603: Ap-plication module: Analytical model

B

ISO/TS 10303-1613:2014

* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1613: Application module: Physical unit non planar design view

B

ISO/TS 10303-1628:2014

* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1628: Ap-plication module: Design product data management

B

ISO/TS 10303-1634:2014

* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1634: Appli-cation module: Assembly component placement requirements

B

ISO/TS 10303-1636:2014

* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1636: Application module: Assembly module design

B

ISO/TS 10303-1637:2014

* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1637: Application module: Assembly module macro definition

B

ISO/TS 10303-1640:2014

* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1640: Application module: Assembly module with macro component

B

ISO/TS 10303-1641:2014

* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1641: Application module: Assembly module with subassembly

B

ISO/TS 10303-1642:2014

* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1642: Application module: Assembly module usage view

B

ISO/TS 10303-1643:2014

* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1643: Application module: Assembly module with interconnect component

B

ISO/TS 10303-1644:2014

* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1644: Application module: Assembly module with cable component

B

ISO/TS 10303-1645:2014

* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1645: Application module: Assembly module with packaged connector component

B

ISO/TS 10303-1646:2014

* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1646: Application module: Footprint definition

B

ISO/TS 10303-1647:2014

* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1647: Application module: Assembly physical interface requirement

B

ISO/TS 10303-1648:2014

* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1648: Application module: Assembly physical requirement allocation

B

ISO/TS 10303-1649:2014

* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1649: Appli-cation module: Assembly technology

B

ISO/TS 10303-1650:2014

* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1650: Application module: Bare die

B

ISO/TS 10303-1651:2014

* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1651: Application module: Basic curve

B


ISO/TS 10303-1652:2014

* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1652: Ap-plication module: Basic geometry

B

ISO/TS 10303-1653:2014

* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1653: Application module: Cable

B

ISO/TS 10303-1654:2014

* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1654: Application module: Characteristic

B

ISO/TS 10303-1656:2014

* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1656: Appli-cation module: Component grouping

B

ISO/TS 10303-1657:2014

* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1657: Ap-plication module: Component feature

B

ISO/TS 10303-1660:2014

* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1660: Application module: Datum difference based model

B

ISO/TS 10303-1662:2014

* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1662: Application module: Design specific assignment to assembly usage view

B

ISO/TS 10303-1663:2014

* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1663: Application module: Design specific assignment to interconnect usage view

B

ISO/TS 10303-1667:2014

* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1667: Application module: Extended basic geometry

B

ISO/TS 10303-1668:2014

* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1668: Ap-plication module: Fabrication joint

B

ISO/TS 10303-1669:2014

* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1669: Appli-cation module: Fabrication requirement

B

ISO/TS 10303-1670:2014

* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1670: Appli-cation module: Fabrication technology

B

ISO/TS 10303-1671:2014

* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1671: Application module: Feature and con-nection zone

B

ISO/TS 10303-1676:2014

* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1676: Ap-plication module: Functional decompo-sition to design

B

ISO/TS 10303-1681:2014

* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1681: Application module: Generic material aspects

B

ISO/TS 10303-1682:2014

* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1682: Appli-cation module: Interconnect 2D shape

B

ISO/TS 10303-1685:2014

* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1685: Ap-plication module: Interconnect module to assembly module relationship

B

ISO/TS 10303-1686:2014

* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1686: Ap-plication module: Interconnect module usage view

B

ISO/TS 10303-1687:2014

* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1687: Ap-plication module: Interconnect module with macros

B

ISO/TS 10303-1689:2014

* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1689: Ap-plication module: Interconnect physical requirement allocation

B

ISO/TS 10303-1690:2014

* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1690: Appli-cation module: Interconnect placement requirements

B

ISO/TS 10303-1691:2014

* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1691: Appli-cation module: Interface component

B

ISO/TS 10303-1692:2014

* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1692: Application module: Land

B

ISO/TS 10303-1693:2014

* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1693: Ap-plication module: Layered 2D shape

B

ISO/TS 10303-1696:2014

* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1696: Ap-plication module: Layered interconnect module 3D design

B

ISO/TS 10303-1698:2014

* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1698: Ap-plication module: Layered interconnect module design

B

ISO/TS 10303-1700:2014

* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1700: Ap-plication module: Layered interconnect module with printed component design

B

ISO/TS 10303-1701:2014

* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1701: Appli-cation module: Layout macro definition

B

ISO/TS 10303-1702:2014

* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1702: Appli-cation module: Manifold subsurface

B

ISO/TS 10303-1703:2014

* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1703: Ap-plication module: Model parameter

B

ISO/TS 10303-1704:2014

* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1704: Application module: Network functional design view

B

ISO/TS 10303-1705:2014

* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1705: Appli-cation module: Functional usage view

B


ISO/TS 10303-1706:2014

* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1706: Application module: Non feature shape element

B

ISO/TS 10303-1707:2014

* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1707: Application module: Package

B

ISO/TS 10303-1709:2014

* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1709: Ap-plication module: Packaged part white box model

B

ISO/TS 10303-1711:2014

* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1711: Appli-cation module: Part external reference

B

ISO/TS 10303-1712:2014

* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1712: Appli-cation module: Part feature function

B

ISO/TS 10303-1716:2014

* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1716: Ap-plication module: Layered interconnect complex template

B

ISO/TS 10303-1717:2014

* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1717: Application module: Part template 3D shape

B

ISO/TS 10303-1718:2014

* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1718: Ap-plication module: Layered interconnect simple template

B

ISO/TS 10303-1720:2014

* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1720: Ap-plication module: Part template shape with parameters

B

ISO/TS 10303-1721:2014

* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1721: Ap-plication module: Physical component feature

B

ISO/TS 10303-1722:2014

* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1722: Application module: Part template

B

ISO/TS 10303-1723:2014

* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1723: Application module: Physical node requirement to implementing compo-nent allocation

B

ISO/TS 10303-1724:2014

* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1724: Application module: Physical unit 2D design view

B

ISO/TS 10303-1725:2014

* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1725: Application module: Physical unit 3D design view

B

ISO/TS 10303-1726:2014

* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1726: Application module: Physical unit 2D shape

B

ISO/TS 10303-1727:2014

* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1727: Application module: Physical unit 3D shape

B

ISO/TS 10303-1728:2014

* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1728: Ap-plication module: Physical unit design view

B

ISO/TS 10303-1729:2014

* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1729: Application module: Physical unit interconnect definition

B

ISO/TS 10303-1730:2014

* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1730: Ap-plication module: Physical unit shape with parameters

B

ISO/TS 10303-1731:2014

* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1731: Application module: Constructive solid geometry 2D

B

ISO/TS 10303-1732:2014

* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1732: Ap-plication module: Physical unit usage view

B

ISO/TS 10303-1733:2014

* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1733: Appli-cation module: Planned characteristic

B

ISO/TS 10303-1734:2014

* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1734: Application module: Pre defined datum symbol

B

ISO/TS 10303-1735:2014

* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1735: Application module: Pre defined datum 2D symbol

B

ISO/TS 10303-1736:2014

* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1736: Application module: Pre defined datum 3D symbol

B

ISO/TS 10303-1737:2014

* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1737: Application module: Printed physical layout template

B

ISO/TS 10303-1741:2014

* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1741: Ap-plication module: Sequential laminate assembly design

B

ISO/TS 10303-1742:2014

* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1742: Ap-plication module: Shape composition

B

ISO/TS 10303-1744:2014

* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1744: Ap-plication module: Discrete shield

B

ISO/TS 10303-1748:2014

* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1748: Ap-plication module: Stratum non planar shape

B


ISO/TS 10303-1749:2014

* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1749: Application module: Styled curve

B

ISO/TS 10303-1750:2014

* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1750: Ap-plication module: Text representation

B

ISO/TS 10303-1751:2014

* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1751: Application module: Test requirement allocation

B

ISO/TS 10303-1752:2014

* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1752: Application module: Thermal network definition

B

ISO/TS 10303-1753:2014

* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1753: Application module: Value with unit extension

B

ISO/TS 10303-1755:2014

* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1755: Ap-plication module: Physical connectivity definition

B

ISO/TS 10303-1760:2014

* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1760: Ap-plication module: Pre defined product data management specializations

B

ISO/TS 10303-1764:2014

* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1764: Ap-plication module: Shape feature

B

ISO/TS 10303-1767:2014

* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1767: Appli-cation module: Composite constituent shape

B

ISO/TS 10303-1769:2014

* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1769: Appli-cation module: Fea material aspects

B

ISO/TS 10303-1770:2014

* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1770: Application module: Part and zone laminate tables

B

ISO/TS 10303-1771:2014

* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1771: Ap-plication module: Stock material

B

ISO/TS 10303-1772:2014

* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1772: Application module: Ply orientation specification

B

ISO/TS 10303-1773:2014

* Industrial automation systems and integration — Product data rep-resentation and exchange — Part 1773: Application module: Basic data representation

B

ISO/TS 10303-1776:2014

* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1776: Ap-plication module: Extended date

B

ISO/TS 10303-1778:2014

* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1778: Ap-plication module: External library

B

ISO/TS 10303-1779:2014

* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1779: Application module: External represen-tation item

B

ISO/TS 10303-1782:2014

* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1782: Ap-plication module: Qualified measure

B

ISO/TS 10303-1788:2014

* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1788: Ap-plication module: Explicit constraints

B

ISO/TS 10303-1789:2014

* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1789: Appli-cation module: Geometric constraints

B

ISO/TS 10303-1790:2014

* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1790: Application module: Parameterization and variational representation

B

ISO/TS 10303-1791:2014

* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1791: Ap-plication module: Primitive solids

B

ISO/TS 10303-1792:2014

* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1792: Application module: Sketch

B

ISO/TS 10303-1794:2014

* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1794: Appli-cation module: Assembly constraints

B

ISO/TS 10303-1795:2014

* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1795: Application module: Assembly feature relationship

B

ISO/TS 10303-1796:2014

* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1796: Application module: Kinematic motion representation

B

ISO/TS 10303-1797:2014

* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1797: Ap-plication module: Kinematic structure

B

ISO/TS 10303-1798:2014

* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1798: Ap-plication module: Kinematic state

B

ISO/TS 10303-1799:2014

* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1799: Ap-plication module: Kinematic topology

B

ISO/TS 10303-1800:2014

* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1800: Ap-plication module: Support resource

B

ISO/TS 10303-1802:2014

* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1802: Appli-cation module: Assembly component

B

ISO/TS 10303-1803:2014

* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1803: Application module: Process plan

B


ISO/TS 10303-1804:2014

* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1804: Ap-plication module: Product as individual assembly and test

B

ISO/TS 10303-1805:2014

* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1805: Application module: Characterized representation

B

ISO/TS 10303-1806:2014

* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1806: Appli-cation module: Form feature in panel

B

ISO/TS 10303-1807:2014

* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1807: Application module: Part shape

B

ISO/TS 10303-1808:2014

* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1808: Ap-plication module: Assembly shape

B

ISO/TS 10303-1809:2014

* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1809: Application module: Default setting association

B

ISO/TS 10303-1810:2014

* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1810: Product and manufacturing information view context

B

ISO/TS 10303-1811:2014

* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1811: Application module: Product and manufacturing information with nomi-nal 3D models

B

ISO/TS 10303-1812:2014

* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1812: Appli-cation module: Product and manufac-turing annotation presentation

B

ISO/TS 10303-1813:2014

* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1813: Application module: Parametric representation

B

ISO/TS 10303-1814:2014

* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1814: Ap-plication module: Machining features

B

ISO/TS 10303-1815:2014

* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1815: Ap-plication module: Mating strucuture

B

ISO/TS 10303-1816:2014

* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1816: Application module: Model based 3D geomatrical dimensioning and toler-ancing representation

B

ISO/TS 10303-1817:2014

* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1817: Application module: Kinematic analysis control and result

B

ISO 10303-1819:2014

* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1819: Appli-cation module: Tessellated geometry

B

ISO/TS 10303-1820:2014

* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1820: Appli-cation module: Point direction model

B

ISO/TS 10303-1821:2014

* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1821: Apl-lication module: Externally conditioned data quality criteria

B

ISO/TS 10303-1822:2014

* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1822: Appli-cation module: Externally conditionned data quality inspection result

B

ISO/TS 10303-1823:2014

* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1823: Appli-cation module: Product view definition reference

B

ISO/TS 10303-1824:2014

* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1824: Appli-cation module: Change management

B

TC 188 Small craft

ISO 10239:2014

Small craft — Liquefied petroleum gas (LPG) systems

B

ISO 21487:2012/Amd 1:2014

Small craft — Permanently installed petrol and diesel fuel tanks — Amend-ment 1

XZ

ISO 25197:2012/Amd 1:2014

Small craft — Electrical/electronic control systems for steering, shift and throttle — Amendment 1

XZ

TC 190 Soil quality

ISO/TS 17182:2014

* Soil quality — Determination of some selected phenols and chlorophenols — Gas chromatographic method with mass spectrometric detection

C

TC 195 Building construction machinery and equipment

ISO 13105-1:2014

* Building construction machinery and equipment — Machinery for concrete surface floating and finishing — Part 1: Terms and commercial specifications

A

ISO 13105-2:2014

* Building construction machinery and equipment — Machinery for concrete surface floating and finishing — Part 2: Safety requirements and verification

C


ISO 21218:2013/Amd 1:2014

* Intelligent transport systems — Com-munications access for land mobiles (CALM) — Access technology support — Amendment 1

XZ

TC 206 Fine ceramics

ISO 17138:2014

Fine ceramics (advanced ceram-ics, advanced technical ceramics) — Mechanical properties of ceramic composites at room temperature — Determination of flexural strength

B

ISO 18560-1:2014

Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for air-purification performance of semiconducting photocatalytic ma-terials by test chamber method under indoor lighting environment — Part 1: Removal of formaldehyde

C


ISO 20507:2014

Fine ceramics (advanced ceram-ics, advanced technical ceramics) — Vocabulary

E

TC 207 Environmental management

ISO 14046:2014

Environmental management — Water footprint — Principles, requirements and guidelines

E

TC 211 Geographic information/Geomatics

ISO 19101-1:2014

Geographic information — Reference model — Part 1: Fundamentals

F

ISO 19154:2014

* Geographic information — Ubiquitous public access — Reference model

F

TC 215 Health informatics

ISO/TR 12300:2014

* Health informatics — Principles of mapping between terminological systems

F

ISO/TS 17439:2014

* Health informatics — Development of terms and definitions for health infor-matics glossaries

C

ISO/TR 19231:2014

* Health informatics — Survey of mHealth projects in low and middle income countries (LMIC)

C

ISO/TR 80001-2-6:2014

* Application of risk management for IT-networks incorporating medical devices — Part 2-6: Application guid-ance — Guidance for responsibility agreements

C

TC 219 Floor coverings

ISO 16581:2014

* Resilient and laminate floor cover-ings — Determination of the effect of simulated movement of a furniture leg

A

ISO/PAS 18167:2014

* Textile floor coverings — Installation practices — General

F

ISO 24334:2014

* Laminate floor coverings — Determina-tion of locking strength for mechani-cally assembled panels

B

TC 229 Nanotechnologies

ISO/TS 12901-1:2012

Nanotechnologies — Occupational risk management applied to engineered nanomaterials — Part 1: Principles and approaches

F

TMBG Technical Management Board - groups

IWA 13:2014 * Multiple resource evaluation guideline

B

ISO/IEC Guide 71:2014

* Guide for addressing accessibility in standards

F

CASCO Committee on conformity assessment

ISO/IEC TS 17021-6:2014

* Conformity assessment — Require-ments for bodies providing audit and certification of management systems — Part 6: Competence requirements for auditing and certification of busi-ness continuity management systems

A


ISO/IEC 30101:2014

* Information technology — Sensor networks: Sensor network and its inter-faces for smart grid system

H

ISO/IEC 30128:2014

* Information technology — Sensor networks — Generic Sensor Network Application Interface

F

ISO/IEC 8825-7:2014

* Information technology — ASN.1 en-coding rules — Part 7: Specification of Octet Encoding Rules (OER)

D

ISO/IEC 13157-1:2014

* Information technology — Telecom-munications and information exchange between systems — NFC Security — Part 1: NFC-SEC NFCIP-1 security services and protocol

C

ISO/IEC 24744:2014

* Software engineering — Metamodel for development methodologies

H

ISO/IEC 7811-8:2014

* Identification cards — Recording technique — Part 8: Magnetic stripe — Coercivity of 51,7 kA/m (650 Oe)

B

ISO/IEC 18013-3:2009/Amd 2:2014

* Information technology — Personal identification — ISO-compliant driv-ing licence — Part 3: Access control, authentication and integrity validation — Amendment 2: Extended Access Control v1

XZ

ISO/IEC TR 14369:2014

* Information technology — Program-ming languages, their environments and system software interfaces — Guidelines for the preparation of Language-Independent Service Speci-fications (LISS)

G

ISO/IEC 10118-4:1998/Amd 1:2014

* Information technology — Security techniques — Hash-functions — Part 4: Hash-functions using modular arithmetic — Amendment 1: Object identifiers

XZ

ISO/IEC 14496-4:2004/Amd 42:2014

* Information technology — Coding of audio-visual objects — Part 4: Con-formance testing — Amendment 42: Conformance testing of Multi-Resolu-tion Frame Compatible Stereo Coding extension of AVC

XZ

ISO/IEC 14496-5:2001/Amd 34:2014

* Information technology — Coding of audio-visual objects — Part 5: Refer-ence software — Amendment 34: Ref-erence software of the multi-resolution frame compatible stereo coding of AVC

XZ

ISO/IEC 23000-11:2009/Amd 3:2014

* Information technology — Multimedia application format (MPEG-A) — Part 11: Stereoscopic video application for-mat — Amendment 3: Support movie fragment for Stereoscopic Video AF

XZ

ISO/IEC 23002-4:2014/Amd 1:2014

* Information technology — MPEG video technologies — Part 4: Video tool library — Amendment 1: Graphics tool library (GTL) for the reconfigurable multimedia coding (RMC) framework

H


ISO/IEC 15459-1:2014

* Information technology — Automatic identification and data capture tech-niques — Unique identification — Part 1: Individual transport units

B

ISO/IEC 15459-3:2014

* Information technology — Automatic identification and data capture tech-niques — Unique identification — Part 3: Common rules

B

ISO/IEC 15459-4:2014

* Information technology — Automatic identification and data capture tech-niques — Unique identification — Part 4: Individual products and product packages

B

ISO/IEC 15459-5:2014

* Information technology — Automatic identification and data capture tech-niques — Unique identification — Part 5: Individual returnable transport items (RTIs)

B

ISO/IEC 15459-6:2014

* Information technology — Automatic identification and data capture tech-niques — Unique identification — Part 6: Groupings

B

ISO/IEC TS 30135-1:2014

* Information technology — Digital publishing — EPUB3 — Part 1: EPUB3 Overview

D

ISO/IEC TS 30135-2:2014

* Information technology — Digi-tal publishing — EPUB3 — Part 2: Publications

G

ISO/IEC TS 30135-3:2014

* Information technology — Digital pub-lishing — EPUB3 — Part 3: Content Documents

F

ISO/IEC TS 30135-4:2014

* Information technology — Digital publishing — EPUB3 — Part 4: Open Container Format

D

ISO/IEC TS 30135-5:2014

* Information technology — Digital publishing — EPUB3 — Part 5: Media Overlay

E

ISO/IEC TS 30135-6:2014

* Information technology — Digital publishing — EPUB3 — Part 6: EPUB Canonical Fragment Identifier

C

ISO/IEC TS 30135-7:2014

* Information technology — Digital publishing — EPUB3 — Part 7: EPUB3 Fixed-Layout Documents

B

ISO/IEC 19788-4:2014

* Information technology — Learning, education and training — Metadata for learning resources — Part 4: Technical elements

C

Standards confirmed

The following International Standards are confimred for a five year period:

TC 1 Screw threads

ISO 725:2009

ISO 1501:2009

ISO 5408:2009

ISO 5864:1993 (reconfirmed)

TC 2 Fasteners

ISO 6157-1:1988 (reconfirmed)


ISO 5630-6:2009

ISO 15754:2009


ISO 15371:2009

ISO 8729-2:2009
























ISO 2563:2009







ISO 8153-1:2009




ISO 8829-1:2009








ISO 22089:2009



TC 22 Road vehicles
























ISO/TS 19713-1:2010

ISO/TS 19713-2:2010




ISO/TS 15827:2007

(reconfirmed)



TC 23 Tractors and machinery for agriculture and forestry

ISO 4254-6:2009

ISO/TS 11356:2011


ISO 22369-2:2010




ISO 13772:2009

TC 25 Cast irons and pig irons

ISO 185:2005

ISO 2892:2007

ISO 16112:2006

ISO 17804:2005

ISO 21988:2006

TC 34 Food products



TC 51 Pallets for unit load method of materi-als handling


TC 59 Buildings and civil engineering works











TC 60 Gears

ISO/TR 10064-1:1992

TC 61 Plastics


TC 63 Glass containers



TC 67 Materials, equipment and offshore structures for petroleum, petrochemi-cal and natural gas industries

ISO/TS 29001:2010


ISO/TS 23556:2007

(reconfirmed)

TC 83 Sports and other recreational facilities and equipment



TC 85 Nuclear energy, nuclear technologies, and radiological protection

ISO 13465:2009

TC 86 Refrigeration and air-conditioning



TC 102 Iron ore and direct reduced iron

ISO 4691:2009

ISO 9682-1:2009

ISO 9683-2:2009

ISO 11533:2009

TC 108 Mechanical vibration, shock and condi-tion monitoring










ISO 16063-31:2009





ISO 14242-3:2009

TC 162 Doors and windows


TC 163 Thermal performance and energy use in the built environment


TC 165 Timber structures

ISO 8375:2009

TC 180 Solar energy

ISO 9488:1999

TC 183 Copper, lead, zinc and nickel ores and concentrates



TC 202 Microbeam analysis

ISO/TS 24597:2011


ISO/TS 13140-1:2011

ISO/TS 13143-1:2011

ISO/TS 13143-2:2011




ISO 22178:2009

ISO 22951:2009

ISO 24103:2009

TC 210 Quality management and correspond-ing general aspects for medical devices



TC 256 Pigments, dyestuffs and extenders










Standards withdrawn


TC 17 Steel

ISO 683-10:1987 (replaced by ISO 683-5:2014)



ISO 639-6:2009 (replaced by )

TC 61 Plastics


TC 182 Geotechnics

ISO/TS 17892-1:2004

(replaced by ISO 17892-1:2014)

ISO/TS 17892-2:2004

(replaced by ISO 17892-2:2014)

TC 211 Geographic information/Geomatics

ISO 19101:2002 (replaced by ISO 19101-1:2014)

TC 212 Clinical laboratory testing and in vitro diagnostic test systems

ISO/TR 18112:2006

(replaced by )

Meeting calendar

(update at 01 November 2014)

Meetings called for the month of October are not in this edition.

* Information definite but meeting not yet formally convened

** Provisional

December 2014

1-4 Copenhagen (Denmark)

TC 98 Bases for design of structures

1-5 Dublin (Ireland) TC 260 Human resource management

3-5 Tokyo (Japan) TC 232 Learning services outside formal education

3-5 Paris (France) TC 269 Railway applications

4-5 Fukuoka (Japan) TC 197 Hydrogen technologies

5 Berlin (Germany) TC 44/SC 6 Welding and allied processes/Resistance welding and allied mechanical joining

8-10 London (United Kingdom)

TC 147/SC 3 Water qual-ity/Radioactivity measurements

9-12 Madrid (Spain) PC 273 Customer contact centres

10 Virtual (Unknown)

* TC 22/SC 35 Road vehicles/Light-ing and visibility

17 Frankfurt (Germany)

TC 291 Domestic gas cook-ing appliances


TC 98/SC 2 Bases for design of structures/Reliability of structures


TC 98/SC 3 Bases for design of structures/Loads, forces and other actions

January 2015


12-16 Weinheim (Germany)

TC 69/SC 4 Applications of statis-tical methods/Appli-cations of statistical methods in process management

12-16 Dublin (Ireland) TC 121/SC 3 Anaesthetic and res-piratory equipment/Lung ventilators and related equipment

19-20 Toledo (Spain) JTC 1/SC 37 Information technology/Biometrics


* JTC 1/SC 35 Information technol-ogy/User interfaces

19-23 Berlin (Germany) PC 248 Sustainability criteria for bioenergy

22-23 Cape Town (South Africa)

TC 44/SC 8 Welding and allied processes/Equip-ment for gas welding, cutting and allied processes

25-29 Foshan (China) TC 107 Metallic and other inorganic coatings

25-29 Foshan (China) * TC 107/SC 3 Metallic and other inorganic coatings/Electrodeposited coatings and related finishes

25-29 Foshan (China) * TC 107/SC 8 Metallic and other inorganic coatings/Chemical conversion coatings

26-27 Paris (France) TC 166 Ceramic ware, glass-ware and glass ce-ramic ware in contact with food

28 Berlin (Germany) TC 207/SC 3 Environmental man-agement/Environmen-tal labelling

29 West Consho-hocken (Phila-delphia) (USA)

TC 261 Additive manufacturing

February 2015

2-3 Paris (France) TC 44/SC 3 Welding and allied processes/Welding consumables

2-5 Beijing (China) TC 257 Evaluation of energy savings


TC 213 Dimensional and geometrical product specifications and verification

9-13 Fairfax (USA) TC 58/SC 4 Gas cylinders/Opera-tional requirements for gas cylinders


* TC 8/SC 8 Ships and marine technology/Ship design

11 Geneva (Switzerland)

* CSC/SPC Council/Strategy and Policy Committee (CSC/SPC)

11 St. Petersburg, Florida (USA)

TC 115 Pumps

12-13 Geneva (Switzerland)

President's committee


22-23 Miami (USA) TMB Technical Manage-ment Board

March 2015

3 Virtual (Unknown)

CSC/FIN Council/Council Standing Committee on Finance (CSC/FIN)

9 Caparica (Portugal)

* TC 48 Laboratory equipment

9-13 Paris (France) TC 108 Mechanical vibration, shock and condition monitoring


TC 110/SC 4 Industrial trucks/Rough-terrain trucks

9-13 Morioka (Japan) TC 292 Security (official start-ing date=2015-01-01)

12 West Consho-hocken (Phila-delphia) (USA)

TC 221 Geosynthetics

16 Geneva (Switzerland)




COUNCIL Council

23-24 Chengdu (China) * TC 17/SC 15 Steel/Railway rails, rails fasteners, wheels and wheelsets

23-27 Vienna (Austria) * JTC 1/SC 38 Information tech-nology/Distributed application platforms and services (DAPS)

23-27 Paris (France) PC 278 Anti-bribery manage-ment systems

25-26 Nara (Japan) * TC 184 Automation systems and integration

Rio de Janeiro (Brazil)

** PC 287 Chain of custody of wood and wood-based products

March-April 2015

31-2 Montreal (Canada)

* TC 20/SC 9 Aircraft and space vehicles/Air cargo and ground equipment

1st Quarter 2015

(United Kingdom)

** PC 284 Management system for private security operations - Require-ments with guidance

Foshan (China) ** TC 107/SC 4 Metallic and other inorganic coatings/Hot dip coatings (galvanized, etc.)

Foshan (China) ** TC 107/SC 7 Metallic and other inorganic coatings/Corrosion tests

April 2015

10 London (United Kingdom)

* TC 92/SC 1 Fire safety/Fire initia-tion and growth

13-14 Lyon (France) TC 117 Fans

13-17 Tienjin (China) ** TC 161 Control and protec-tive devices for gas and/or oil burners and appliances

13-17 (Czech Republic) ** TC 224 Service activities relating to drinking water supply systems and wastewater systems - Quality criteria of the service and performance indicators

19-24 Vico Equense (Italy)

* TC 184/SC 4 Automation systems and integration/Indus-trial data


19-24 Hangzhou (China)

* TC 204 Intelligent transport systems

20-22 Zurich (Switzerland)

* TC 126 Tobacco and tobacco products


* TC 126/SC 1 Tobacco and tobacco products/Physical and dimensional tests


* TC 126/SC 2 Tobacco and to-bacco products/Leaf tobacco

20-24 San Francisco (USA)

* TC 215 Health informatics

21 Beijing (China) ** TC 274 Light and lighting

21-22 Düsseldorf (Germany)

TC 44/SC 10 Welding and allied processes/Unification of requirements in the field of metal welding

21-22 (Kazakhstan) ** TC 67/SC 2 Materials, equipment and offshore struc-tures for petroleum, petrochemical and natural gas industries/Pipeline transporta-tion systems

22-24 General Roca (Argentina)

* TC 34/SC 12 Food products/Sen-sory analysis

23 Düsseldorf (Germany)

* TC 44/SC 11 Welding and allied processes/Qualifica-tion requirements for welding and allied processes personnel

24 Atlanta (USA) ** TC 6/SC 2 Paper, board and pulps/Test methods and quality specifica-tions for paper and board

25 Atlanta (USA) ** TC 6 Paper, board and pulps

(France) ** TC 29 Small tools

(France) ** TC 29/SC 9 Small tools/Tools with defined cutting edges, cutting items

(USA) ** TC 34/SC 15 Food products/Coffee

April-May 2015

15-16 (United Kingdom)

** TC 67/SC 4 Materials, equipment and offshore struc-tures for petroleum, petrochemical and natural gas industries/Drilling and produc-tion equipment


* TC 30 Measurement of fluid flow in closed conduits

May 2015

4-7 Toronto (Canada) * TC 68 Financial services

4-8 Kuching (Malaysia)

** JTC 1/SC 27 Information tech-nology/IT Security techniques

4-8 (Unknown) ** TC 36 Cinematography

8-15 Tokyo (Japan) ** TC 10 Technical product documentation

11-12 Kuching (Malaysia)

* JTC 1/SC 27 Information tech-nology/IT Security techniques

11-15 Ohio (USA) ** TC 184/SC 5 Automation systems and integration/Inter-operability, integra-tion, and architec-tures for enterprise systems and automa-tion applications

11-16 Bologna (Italy) ** TC 130 Graphic technology


** TC 156 Corrosion of metals and alloys

13 Paris (France) ** TC 87 Cork

18-22 (Brazil) ** JTC 1/SC 40 Information tech-nology/IT Service Management and IT Governance


** TC 4 Rolling bearings

18-22 Chengdu (China) ** TC 39/SC 2 Machine tools/Test conditions for metal cutting machine tools

18-22 Luzern (Switzerland)

* TC 114 Horology

22 Los Angeles (USA)

TC 119 Powder metallurgy

22 Cape Town (South Africa)

* TC 228 Tourism and related services

24-29 Tokyo (Japan) * TC 113 Hydrometry

25-29 Madrid (Spain) ** TC 23/SC 18 Tractors and machin-ery for agriculture and forestry/Irrigation and drainage equipment and systems

26-29 Buenos Aires (Argentina)

* TC 85/SC 5 Nuclear energy, nuclear technolo-gies, and radiological protection/Nuclear fuel cycle

27 London (United Kingdom)

** TC 67/SC 5 Materials, equipment and offshore struc-tures for petroleum, petrochemical and natural gas industries/Casing, tubing and drill pipe

Glasgow, Scotland (United Kingdom)

** JTC 1/SC 32 Information technolo-gy/Data management and interchange

(USA) ** PC 272 Forensic sciences

8-15 Tokyo (Japan) ** TC 10/SC 1 Technical product documentation/Basic conventions

8-15 Tokyo (Japan) ** TC 10/SC 6 Technical product documentation/Me-chanical engineering documentation

8-15 Tokyo (Japan) ** TC 10/SC 10 Technical product documentation/Process plant documentation

Tokyo (Japan) ** TC 113/SC 1 Hydrometry/Velocity area methods

Tokyo (Japan) ** TC 113/SC 2 Hydrometry/Flow measurement structures

Tokyo (Japan) ** TC 113/SC 5 Hydrometry/In-struments, equip-ment and data management

Tokyo (Japan) ** TC 113/SC 6 Hydrometry/Sediment transport


Tokyo (Japan) ** TC 113/SC 8 Hydrometry/Ground water

London (United Kingdom)

** TC 131/SC 6 Fluid power systems/Contamination control

Vancouver (Canada)

** TC 282/SC 1 Water re-use/Treated wastewater re-use for Irrigation

Vancouver (Canada)

** TC 282/SC 3 Water re-use/Risk and performance evaluation of water re-use systems

June 2015

1-5 Sapporo (Japan) ** TC 42 Photography

1-5 Seattle (USA) * TC 43/SC 3 Acoustics/Underwa-ter acoustics

1-6 Philadelphia (USA)

** TC 147 Water quality

3-5 (Japan) ** TC 145 Graphical symbols

5-6 San Antonio (USA)

** TC 85/SC 6 Nuclear energy, nuclear technolo-gies, and radiological protection/Reactor technology

8-12 Houston (USA) * TC 35 Paints and varnishes

8-12 Berlin (Germany) ** TC 121 Anaesthetic and res-piratory equipment

9-12 Pretoria (South Africa)

** REMCO Committee on refer-ence materials


* TC 289 Brand evaluation

10-11 (France) ** TC 17/SC 9 Steel/Tinplate and blackplate

11-12 Paris (France) * TC 24/SC 4 Particle charac-terization includ-ing sieving/Particle characterization

15-19 Vancouver (Canada)

** TC 22/SC 13 Road vehicles/Ergo-nomics applicable to road vehicles


* TMB Technical Manage-ment Board

18-19 Stuttgart (Germany)

* TC 184/SC 2 Automation systems and integration/Robots and robotic devices

21-26 Matsue (Japan) ** TC 37 Terminology and other language and content resources

22-25 Avignon (France) * TC 54 Essential oils

22-26 (Netherlands) ** TC 34/SC 9 Food products/Microbiology

22-26 (China) ** TC 69 Applications of statis-tical methods

22-26 Göteborg (Sweden)

* TC 188 Small craft

30 Virtual (Unknown)

* President's committee


Matsue (Japan) ** JTC 1/SC 28 Information technol-ogy/Office equipment

Montreal (Canada)

** JTC 1/SC 31 Information technol-ogy/Automatic iden-tification and data capture techniques

(Australia) ** JTC 1/SC 36 Information tech-nology/Information technology for learn-ing, education and training

Zurich (Switzerland)

** TC 17/SC 17 Steel/Steel wire rod and wire products

(Europe) ** TC 34/SC 18 Food products/Cocoa

Beijing (China) ** TC 46 Information and documentation

Mexico City (Mexico)

** TC 242 Energy Management

(China) ** TC 249 Traditional chinese medicine

(Unknown) ** TC 268/SC 1 Sustainable develop-ment in communities/Smart community infrastructures

June-July 2015

30-3 Milan (Italy) * TC 193 Natural gas

30-3 Milan (Italy) * TC 193/SC 1 Natural gas/Analysis of natural gas

30-3 Milan (Italy) * TC 193/SC 3 Natural gas/Upstream area

2nd Quarter 2015

(Europe) ** TC 94/SC 13 Personal safety -- Protective clothing and equipment/Pro-tective clothing

Istanbul (Turkey) ** TC 120 Leather

(China) ** TC 172/SC 7 Optics and photon-ics/Ophthalmic optics and instruments

1st Semester 2015

(USA) ** TC 31/SC 9 Tyres, rims and valves/Valves for tube and tubeless tyres

July 2015

1-7 Berlin (Germany) * TC 91 Surface active agents

6-10 Helsinki (Finland) * TC 44 Welding and allied processes

(USA) ** TC 86/SC 6 Refrigeration and air-conditioning/Testing and rating of air-conditioners and heat pumps

August 2015

26-28 Jeju (Korea, Republic of)

* TC 206 Fine ceramics

August-September 2015

31-4 Hokaido (Japan) * JTC 1/SC 35 Information technol-ogy/User interfaces

September 2015

1-6 (Canada) ** TC 163 Thermal performance and energy use in the built environment

4-12 New Delhi (India) ** TC 207 Environmental management

7-11 Paris (France) * TC 153 Valves

7-14 Sydney (Australia)

** TC 96 Cranes

13 Seoul (Korea, Republic of)



13-17 Lahaina, Hawaii (USA)

** TC 127 Earth-moving machinery


* COUNCIL Council


14-15 Hawaii (USA) * JTC 1/SC 22 Information technol-ogy/Programming languages, their envi-ronments and system software interfaces

14-18 Milan (Italy) * TC 43 Acoustics

14-18 Berlin (Germany) ** TC 150 Implants for surgery

14-18 (Canada) ** TC 205 Building environment design

14-18 Berlin (Germany) * TC 256 Pigments, dyestuffs and extenders

14-25 Berlin (Germany) * TC 213 Dimensional and geometrical product specifications and verification


* DEVCO Committee on devel-oping country matters

15-16 Seoul (Korea, Republic of)

* TMB Technical Manage-ment Board

16-18 Seoul (Korea, Republic of)

* GA General Assembly


* CSC/FIN Council/Council Standing Committee on Finance (CSC/FIN)

17-18 Moscow (Rus-sian Federation)

** TC 197 Hydrogen technologies

21-24 Delft (Netherlands)

** TC 146/SC 1 Air quality/Stationary source emissions

21-25 Delft (Netherlands)

** TC 146/SC 6 Air quality/Indoor air

28-29 Basel (Switzerland)

** TC 44/SC 8 Welding and allied processes/Equip-ment for gas welding, cutting and allied processes

(Europe) ** TC 22/SC 19 Road vehicles/Wheels

Vienna (Austria) ** TC 33 Refractories

14-18 Milan (Italy) * TC 43/SC 1 Acoustics/Noise

14-18 Milan (Italy) * TC 43/SC 2 Acoustics/Building acoustics

(Europe) ** TC 67 Materials, equipment and offshore struc-tures for petroleum, petrochemical and natural gas industries

(Japan) ** TC 133 Clothing sizing sys-tems - size designa-tion, size measure-ment methods and digital fittings

Johor Bahru (Malaysia)

** TC 165 Timber structures

Seattle (USA) ** TC 201/SC 6 Surface chemi-cal analysis/Sec-ondary ion mass spectrometry

(Netherlands) ** TC 258 Project, programme and portfolio management

September-October 2015

28-2 Edmonton (Canada)

* TC 229 Nanotechnologies

October 2015

1 Rome (Italy) * TC 39/SC 4 Machine tools/Wood-working machines

5-9 Dublin (Ireland) * JTC 1/SC 38 Information tech-nology/Distributed application platforms and services (DAPS)

8 Virtual (Unknown)



8-9 Sao Paulo (Brazil)

* TC 58/SC 2 Gas cylinders/Cylin-der fittings

9 Copenhagen (Denmark)

* TC 254 Safety of amusement rides and amusement devices

12-16 Paris (France) * TC 34/SC 17 Food products/Man-agement systems for food safety

12-16 Turin (Italy) ** TC 70 Internal combustion engines

12-16 Beijing (China) * TC 181 Safety of toys

12-17 Beijing (China) * TC 20 Aircraft and space vehicles

12-17 Beijing (China) * TC 20/SC 4 Aircraft and space vehicles/Aerospace fastener systems

12-17 Beijing (China) * TC 20/SC 8 Aircraft and space vehicles/Aerospace terminology

15-17 Seattle (USA) * TC 201 Surface chemical analysis

18-23 Vichy (France) * TC 45 Rubber and rubber products

18-23 Vichy (France) * TC 45/SC 4 Rubber and rubber products/Products (other than hoses)

19-21 Jeju (Korea, Republic of)

* TC 281 Fine Bubble Technology

19-23 (Germany) ** TC 39/SC 2 Machine tools/Test conditions for metal cutting machine tools

19-23 Gaithersburg (USA)

* TC 92 Fire safety

19-23 Gaithersburg (USA)

* TC 92/SC 1 Fire safety/Fire initia-tion and growth

20-23 Oslo (Norway) ** TC 58/SC 3 Gas cylinders/Cylin-der design


* TC 79/SC 2 Light metals and their alloys/Or-ganic and anodic oxidation coatings on aluminium

22-23 Berlin (Germany) * TC 209 Cleanrooms and as-sociated controlled environments

26-29 Pretoria (South Africa)

** TC 264 Fireworks

26-30 New Delhi (India) * JTC 1/SC 27 Information tech-nology/IT Security techniques

26-30 Porto Alegre (Brazil)

* TC 23/SC 17 Tractors and machin-ery for agriculture and forestry/Manu-ally portable forest machinery

28-30 Tsukuba (Japan) ** TC 202 Microbeam analysis

29-30 Tampa, Florida (USA)

* TC 17/SC 12 Steel/Continuous mill flat rolled products

(Unknown) ** TC 2 Fasteners


Madrid (Spain) ** TC 10/SC 8 Technical prod-uct documenta-tion/Construction documentation

(Netherlands) ** TC 34/SC 2 Food products/Ole-aginous seeds and fruits and oilseed meals

(Netherlands) ** TC 34/SC 11 Food products/Animal and vegetable fats and oils

Nairobi (Kenya) ** TC 38 Textiles

Nairobi (Kenya) ** TC 38/SC 1 Textiles/Tests for coloured textiles and colorants

Nairobi (Kenya) ** TC 38/SC 2 Textiles/Cleansing, finishing and water resistance tests

Nairobi (Kenya) ** TC 38/SC 23 Textiles/Fibres and yarns

Nairobi (Kenya) ** TC 38/SC 24 Textiles/Condition-ing atmospheres and physical tests for textile fabrics

Madrid (Spain) ** TC 59/SC 3 Buildings and civil engineering works/Functional/user requirements and performance in build-ing construction

Madrid (Spain) ** TC 59/SC 16 Buildings and civil engineering works/Accessibility and usability of the built environment

Washington, D.C (USA)

** TC 79 Light metals and their alloys

Sao Paulo (Brazil)

** TC 135/SC 9 Non-destructive test-ing/Acoustic emission testing

(Turkey) ** TC 180 Solar energy

Santiago (Chile) ** TC 195 Building construc-tion machinery and equipment

(Germany) ** TC 244 Industrial furnaces and associated pro-cessing equipment

(China) ** TC 282/SC 3 Water re-use/Risk and performance evaluation of water re-use systems

November 2015

2-6 (Switzerland) ** TC 215 Health informatics

2-6 Beijing (China) * TC 282 Water re-use

3 Berlin (Germany) * TC 83 Sports and other recreational facilities and equipment

9-12 (Spain) ** TC 189 Ceramic tile

9-13 Kobe (Japan) * TC 21 Equipment for fire protection and fire fighting

11 Notting-ham (United Kingdom)

* TC 60 Gears

11-13 (Malaysia) ** TC 123 Plain bearings

12-13 Kuala Lumpur (Malaysia)

** TC 227 Springs

16 (USA) ** PC 252 Natural gas fuelling stations for vehicles

(China) ** JTC 1 Information technology

Pretoria (South Africa)

** TC 212 Clinical laboratory testing and in vitro di-agnostic test systems

4th Quarter 2015

(Sweden) ** TC 17/SC 1 Steel/Methods of de-termination of chemi-cal composition

Dayton, Ohio (USA)

** TC 159/SC 3 Ergonomics/An-thropometry and biomechanics

Tel Aviv (Israel) ** TC 282 Water re-use

2nd Semester 2015

(USA) ** TC 171 Document manage-ment applications

(France) ** TC 172/SC 1 Optics and photon-ics/Fundamental standards

(USA) ** TC 184/SC 4 Automation systems and integration/Indus-trial data

Month unknown 2015

Brussels (Belgium)

** TC 23 Tractors and machin-ery for agriculture and forestry

(USA) ** TC 27 Solid mineral fuels

(USA) ** TC 41 Pulleys and belts (including veebelts)

Berlin (Germany) ** TC 138 Plastics pipes, fittings and valves for the transport of fluids

(Japan) ** TC 142 Cleaning equipment for air and other gases

(China) ** TC 155 Nickel and nickel alloys

(United Kingdom)

** TC 164 Mechanical testing of metals

(Austria) ** TC 190 Soil quality

Vienna (Austria) ** TC 190/SC 2 Soil quality/Sampling

January 2016

(China) ** TC 120 Leather

February 2016

(USA) ** TC 213 Dimensional and geometrical product specifications and verification

March 2016


* COUNCIL Council

April 2016

11-15 Sydney (Australia)

** TC 178 Lifts, escalators and moving walks

Seoul (Korea, Republic of)

** TC 161 Control and protec-tive devices for gas and/or oil burners and appliances

May 2016


(Brazil) ** TC 67/SC 4 Materials, equipment and offshore struc-tures for petroleum, petrochemical and natural gas industries/Drilling and produc-tion equipment

(India) ** TC 85 Nuclear energy, nuclear technolo-gies, and radiological protection

(USA) ** TC 282/SC 3 Water re-use/Risk and performance evaluation of water re-use systems

June 2016

(Germany) ** JTC 1/SC 36 Information tech-nology/Information technology for learn-ing, education and training

1st Semester 2016

(China) ** TC 34/SC 16 Food products/Hori-zontal methods for molecular biomarker analysis

September 2016

19 Beijing (China) * COUNCIL Council

21-23 Beijing (China) * GA General Assembly

Vienna (Austria) ** JTC 1/SC 22 Information technol-ogy/Programming languages, their envi-ronments and system software interfaces

Paris (France) ** TC 17 Steel

Sao Paulo (Brazil)

** TC 209 Cleanrooms and as-sociated controlled environments

Shanghai (China) ** TC 213 Dimensional and geometrical product specifications and verification

Beijing (China) ** TC 256 Pigments, dyestuffs and extenders

3rd Quarter 2016

(USA) ** TC 289 Brand evaluation

October 2016

2-7 Rio de Janeiro (Brazil)

* TC 59 Buildings and civil engineering works


* TC 58 Gas cylinders

(Korea, Repub-lic of)

** TC 201 Surface chemical analysis

(Israel) ** TC 282/SC 3 Water re-use/Risk and performance evaluation of water re-use systems

November 2016

(Norway) ** JTC 1 Information technology

4th Quarter 2016

Delft (Netherlands)

** TC 28 Petroleum products and lubricants

Delft (Netherlands)

** TC 28/SC 5 Petroleum products and lubricants/Meas-urement of refriger-ated hydrocarbon and non-petroleum based liquefied gaseous fuels

Delft (Netherlands)

** TC 28/SC 7 Petroleum products and lubricants/Liquid Biofuels

Month unknown 2016


** JTC 1/SC 23 Information technolo-gy/Digitally Recorded Media for Informa-tion Interchange and Storage

(Russian Federation)

** REMCO Committee on refer-ence materials

(Denmark) ** TC 37 Terminology and other language and content resources

(South Africa) ** TC 44 Welding and allied processes

(Malaysia) ** TC 45 Rubber and rubber products

Wellington (New Zealand)

** TC 46 Information and documentation

Wellington (New Zealand)

** TC 46/SC 11 Information and doc-umentation/Archives/records management

(Sweden) ** TC 102 Iron ore and direct reduced iron

(Japan) ** TC 138/SC 2 Plastics pipes, fittings and valves for the transport of fluids/Plastics pipes and fittings for water supplies

(Japan) ** TC 183 Copper, lead, zinc and nickel ores and concentrates

June 2017

(Australia) ** JTC 1/SC 36 Information tech-nology/Information technology for learn-ing, education and training

September 2017

London (United Kingdom)

** JTC 1/SC 22 Information technol-ogy/Programming languages, their envi-ronments and system software interfaces

New Delhi (India) ** TC 178 Lifts, escalators and moving walks

3rd Quarter 2017

Vienna (Austria) ** TC 289 Brand evaluation

June 2018


** JTC 1/SC 36 Information tech-nology/Information technology for learn-ing, education and training