3
Kathrein Inc., Scala Division Post Ofce Box 4580 Medford, OR 97501 (USA) Phone: (541) 779-6500 Fax: (541) 779-3991 Email: communicati ons@kathr ein.com Interne t: www.kathrein-sc ala.com 10839-H 936.2455/h  782 10248 782 10249  782 10250 782 10251 High Pow er Dualband Combiner 470–960 MHz 1710–2170 MHz 782 10248 and 782 10250 Single unit Specications: Frequency range Low band (port 1) 470–960 MHz High band (port 2) 1710–2170 MHz Impedance 50 ohms VSWR < 1.2:1 Insertion loss Port 1Port 3 <0.1 dB (470–960 MHz) (0.05 dB typical) Port 2Port 3 <0.1 dB (1710–2170 MHz) (0.05 dB typical) Isolation Port 1Port 2 > 45 dB (470–550 MHz) > 55 dB (550–960 MHz) > 65 dB (1710–2170 MHz) Input power Band 1 < 700 watts Band 2 < 650 watts Intermodulation < -160 dBc (2 nd  /3 rd  order; with 2 x 20 W) Operating temperature -55° to +60° C Connectors 7-16 DIN female (long neck) DC/AISG transparency 782 10248 782 10251 782 10249 782 10251 Port 1Port 3 By-pass (max. 2500 mA)  Stop Port 2Port 3 By-pass (max. 2500 mA)  By-pass (max. 2500 mA) Lightning protection Built-in (3kA, 10/350ms pulse) Weight single unit 6.4 lb (2.9 kg) double unit 12.6 lb (5.7 kg) Dimensions single unit 11 x 4.9 x 2.5 inches (274 x 125 x 64 mm) double unit 11 x 4.9 x 4.7 inches (274 x 125 x 120 mm) Shipping single unit 14.4 x 8.1 x 5.9 inches (365 x 207 x 150 mm) Dimensions double unit 14.4 x 8.4 x 8.1 inches (365 x 214 x 207 mm) Mounting Mounts to a at surface with four screws (max. 8 mm dia). Mounts to 2 to 5.7 inch (50 to 145 mm) OD masts with optional mounting kit.  Designed for co-siting purposes.  Enables feeder sharing.  Can be used as a combiner near the BTS or in a reciprocal function near the antenna.  Suitable for indoor or outdoor applications (IP 66).  Built-in lightning protection.  V ery low inser tion loss.  High input power.  Extended connectors for improved weather sealing.  External DC Stop available as an accessory.  782 10248 and 782 10249 DC by-pass between all ports.  782 10250 and 782 10251 DC by-pass between ports 2 and 3 Built-in DC stop between ports 1 and 3. 782 10249 and 782 10251 Double unit Typical Attenuation Curves 0 10 20 30 40 50 60 70 80 90 100       A       t       t      e      n     u      a       t       i      o      n       /       d       B Frequency/MHz 400 600 800 100 0 1200 140 0 1600 1800 200 0 2200 240 0 1710 – 2170 470 – 960 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 400 600 800 100 0 1200 1400 1600 1800 2000 2200 240 0       A       t       t      e      n     u      a       t       i      o      n       /       d       B Frequency/MHz 1710 – 2170 470 – 960 Diagram II Diagram I Port 1 Port 3  Port 2 Port 3 Port 1 Port 3  Port 2 Port 3

K78210250 High Power Dualband Duplexer

Embed Size (px)

DESCRIPTION

weff

Citation preview

  • Kathrein Inc., Scala Division Post Office Box 4580 Medford, OR 97501 (USA) Phone: (541) 779-6500 Fax: (541) 779-3991Email: [email protected] Internet: www.kathrein-scala.com

    10839-H936.2455/h

    7821024878210249 7821025078210251

    High Power Dualband Combiner470960 MHz

    17102170 MHz

    78210248 and 78210250Singleunit

    Specifications:Frequency range

    Low band (port 1) 470960 MHz High band (port 2) 17102170 MHz

    Impedance 50 ohmsVSWR < 1.2:1Insertion loss

    Port 1Port 3 55 dB (550960 MHz) > 65 dB (17102170 MHz)

    Input power Band 1 < 700 watts Band 2 < 650 watts

    Intermodulation < -160 dBc (2nd/3rd order; with 2 x 20 W)Operating temperature -55 to +60 CConnectors 7-16 DIN female (long neck)DC/AISG transparency 78210248 78210251

    78210249 78210251Port 1Port 3 By-pass (max. 2500 mA) Stop Port 2Port 3 By-pass (max. 2500 mA) By-pass (max. 2500 mA)

    Lightning protection Built-in (3kA, 10/350ms pulse)Weight single unit 6.4 lb (2.9 kg)

    double unit 12.6 lb (5.7 kg)Dimensions single unit 11 x 4.9 x 2.5 inches (274 x 125 x 64 mm)

    double unit 11 x 4.9 x 4.7 inches (274 x 125 x 120 mm)Shipping single unit 14.4 x 8.1 x 5.9 inches (365 x 207 x 150 mm) Dimensions double unit 14.4 x 8.4 x 8.1 inches (365 x 214 x 207 mm)Mounting Mounts to a flat surface with four screws (max. 8

    mm dia). Mounts to 2 to 5.7 inch (50 to 145 mm) OD masts with optional mounting kit.

    Designed for co-siting purposes. Enables feeder sharing. Can be used as a combiner near the BTS or in a reciprocal

    function near the antenna. Suitable for indoor or outdoor applications (IP 66). Built-in lightning protection. Very low insertion loss. High input power. Extended connectors for improved weather sealing. External DC Stop available as an accessory. 78210248 and 78210249

    DC by-pass between all ports. 78210250 and 78210251

    DC by-pass between ports 2 and 3 Built-in DC stop between ports 1 and 3.

    78210249 and 78210251Doubleunit

    Typical Attenuation Curves

    0

    10

    20

    30

    40

    50

    60

    70

    80

    90

    100

    Atte

    nuat

    ion/

    dB

    Frequency/MHz400 600 800 1000 1200 1400 1600 1800 2000 2200 2400

    1710 2170470 960

    0

    0.1

    0.2

    0.3

    0.4

    0.5

    0.6

    0.7

    0.8

    0.9

    1.0400 600 800 1000 1200 1400 1600 1800 2000 2200 2400

    Atte

    nuat

    ion/

    dB

    Frequency/MHz

    1710 2170 470 960

    Diagram II

    Diagram IPort 1 Port 3 Port 2 Port 3

    Port 1 Port 3 Port 2 Port 3

  • All specifications are subject to change without notice. The latest specifications are available at www.kathrein-scala.com.Kathrein Inc., Scala Division Post Office Box 4580 Medford, OR 97501 (USA) Phone: (541) 779-6500 Fax: (541) 779-3991

    Email: [email protected] Internet: www.kathrein-scala.com

    7821024878210249 7821025078210251

    High Power Dualband Combiner470960 MHz

    17102170 MHz

    OrderInformation:Model Description 782 10248 Dualband combiner, single unit, DC by-pass all ports782 10249 Dualband combiner, double unit, DC by-pass all ports782 10250 Dualband combiner, single unit, built-in DC stop782 10251 Dualband combiner, double unit, built-in DC stop

    MountingOptions:Model Description 2 x 131 1847 Mounting Kit for 2 to 5.7 inch

    (50 to 145 mm) OD mast.

    2 x 131 1847 Mounting Kit

    The mounting plates can be removed and replaced with other means of mounting by removing the screws through (M5 x 10).

    Caution:Exceedingthemaximumdrilleddepthof8.5mmwithreplacementhardwareandfastenersmaypermanentlydamagetheunit.

    Side view782 10248,782 10250Single Unit

    Side view782 10249,782 10251Double Unit

    Top view782 10248,782 10250Single Unitand782 10249,782 10251Double Unit

    Bottom view782 10248,782 10250Single Unitand782 10249,782 10251Double Unit

    ~

    4 screws M5 x 104 spring washers

    5.5 DIN 6095

    4.7 inches(120 mm)

    2.5 inches(64 mm)

    4.8 inches(122 mm)

    15.2 inches(132.1 mm)

    10.8 inches(274 mm)

    Single Unit 782 10250 Double Unit 782 10251(only 1 unit shown)

    Port 1 Port 2470 960 1710 2170

    Port 3

    Single Unit 782 10248Double Unit 782 10249(only 1 unit shown)

    Port 1 Port 2470 960 1710 2170

    Port 3