Laboratories Profile

Electronics&Communication

Engineering Section

Yadavindra College of Engineering

Punjabi University Guru Kashi Campus

Talwandi Sabo (Bathinda)

PUNJAB

DIGITAL ELECTRONIC CIRCUITS&

MICROPROCESSOR APPLICATIONS

LAB

Faculty Incharge: Dr. Jagtar Singh, Professor

Instructor: Er.Navdeep Singh

Attendent: Mr. Sukhcharan Singh

INTRODUCTION

This lab has been designed to make students acquainted with the designing of digital systems,

and programmable aspects of microprocessors and microcontrollers.

This lab is furnished with Universal Gates Demorgan’s Theorem kit, Logic Gates & Digital

Trainer Logic Kit , Digital IC Tester, Adders &Subtractors , Analog IC Tester, Digital

Trainer Kit for Study of Flip-Flop , 4 Bit BCD Counter , 4 Bit Ripple Counter (N-counter ), 4

bit Up-Down Counter, 4 Bit Programmable Counter=1, 4 Bit Shift Register, Multiplexer,

8085 Trainer Kits, 8031/8051 Microcontroller Kit, ANSI C Compiler For All 8051 Family,

Digital Signal Processor Trainer (Pl Dsp50-TMS320C5xx), USB Experimental Board , Bread

Board Strips, ADC -0809 Interface Module for 8085 Microprocessor Kit, 8031/8051

Microcontroller Kit with LCD Display, Dual DAC Interface Module for Microprocessor

8085 Kit , Labview/Easy Lab Based Data Acquisition Modules, Stepper Motor Controller

Interface Module , Microprocessor 8085 Kit, USB Interfaced Ultra High Speed Universal

device programmer, Traffic Light Controller Card for 8085 microprocessor kit, Digital Logic

Probes, Temperature Measurement card for 8085 Microprocessor Kit, DC Motor controller

card for 8085 Microprocessor Kit, Bread Board (Digital Lab), Analog To Digital Converter,

Digital To Analog Converter, Electronic work station model-3030 (Analog & Digital), Micro

Controller Kit Advanced, Advance 8051 Trainer System, Keypad Interface 7 segment & LED

display interface, Elevator Interface, Musical Tone Generator, Logic control interface, Relay

Buzzer 8085 interface, CRO, Function Generator, Digital Multimeter.

DIGITAL ELECTRONIC CIRCUITS & MICROPROCESSORS APPLICATION LAB

LIST OF EQUIPMENT:

Sr. No. Name of Equipment Quantity

1 Universal Gates Demorgan’s Theorem 3

2 Logic Gates ME680 3

3 Digital Trainer Logic (ME 726B) 10

4 Digital IC Tester 1

5 Adders &Subtractors ME 701 3

6 Analog IC Tester 1

7 Digital Trainer Kit for Study of Flip-Flop ME 702=2 3

8 4 Bit BCD Counter ME 713 3

9 4 Bit Ripple Counter (N-counter Me 712) 3

10 4 bit Up-Down Counter (Me 715=2) 4 Bit )Programmable Counter=1) 3

11 4 Bit Shift Register Me716 3

12 Multiplexer 3

13 8085 Trainer Kits 23

14 8031/8051 Microcontroller Kit 1

15 ANSI C Compiler For All 8051 Faimily 1

16 Digital Signal Processor Trainer (Pl Dsp50-TMS320C5xx) 1

17 USB Experimental Board ( K8055) 1

18 Bread Board Strips 15

19 ADC -0809 Interface Module for 8085 Microprossesor Kit 1

20 8031/8051 Microcontroller Kit with LCD Display 1

21 Dual DAC Interface Module for Microprocessor 8085 Kit (0800) 1

22 Labview/Dasylab/Easy Lab Based Data Acquisition Modules 1

23 Stepper Motor Controller Interface Module 06 Microprocessor 8085 Kit 1

24 USB Interfaced Ultra High Speed Universal device programmer 1

25 Traffic Light Controller card for 8085 microprocessor kit 1

26 Digital Logic Probes 4

27 Temperature Measurement card for 8085 microprocessor kit 1

28 DC Motor controller card for 8085 microprocessor kit 1

29 Bread Board (Digital Lab) ST 2611 1

30 Analog To Digital Converter ST 2601 1

31 Digital To Analog Converter ST 2602 1

32 Electronic work station model-3030(Anlog& Digital) 1

33 Micro counteroler kit advanced 1

34 Advance 8051 Trainer System 14

35 Keypad Interface 1

36 7 segment & LED display interface 1

37 Elevator Interface 1

38 Musical Tone Generator 1

39 Logic control interface 1

40 Relay Buzzer 8085 interface 1

41 CRO 3

42 FUNCTION GENRATOR 2

43 DIGITAL MULTI METER 2

ANALOG ELECTRONICSCIRCUITS

& EDC LAB

Faculty Incharge: Dr. AshwaniNarula, Associate Professor

Instructor: Er.Navdeep Singh

Attendent: Mr. Sukhcharan Singh

INTRODUCTION

The goal of this lab is to give the students a practical experience in working with

semiconductor devices and explore the design and operation of essential circuits that employ

these devices.

This lab aims at to provide Transistor Characteristics Apparatus, P-N Junction Diode

Characteristics Apparatus, Energy Band Gap Apparatus for PN Junction Diode, Diode as

Rectifier, Clipping Circuits, Clamping Circuits, FET Characteristics Apparatus, MOSFET

Characteristic Apparatus, Push Pull Amplifier Kit, Audio Power Meter, BJT Amplifier and

Emitter Follower Trainer, Two Stage RC Coupled Amplifier, Zener Diode Characteristics

Trainer, Operational Amplifier Circuit Experimental Board( Mother Board & OP - Amp

Daughter Board) , DC Multipoint power supply, CRO, Function Generator, Digital

Multimeter, Analog Multimeter.

ANALOG ELECTRONICS CIRCUITS & EDC LAB

LIST OF EQUIPMENT:

Sr. No. Name of Equipment Quantity

1 Transistor Characteristics Apparatus 3

2 P-N Junction Diode Characteristics Apparatus 3

3 Energy Band Gap Apparatus for PN Junction Diode 3

4 Diode as Rectifier 3

5 Clipping Circuits 3

6 Clamping Circuits 3

7 FET Characteristics Apparatus 3

8 MOSFETCharacteristicApparatus 3

9 Push Pull Amplifier Kit 5

10 Audio Power Meter 1

11 BJT Amplifier and Emitter Follower Trainer 5

12 Two Stage RC Coupled Amplifier 1

13 Zener Diode Characteristics Trainer 3

14 Operational Amplifier Circuit Experimental Board( Mother Board & OP -

Amp Daughter Board)

5

15 DC Multipoint power supply 8

16 CRO 3

17 Function Generator 3

18 Digital Multimeter 3

19 Analog Multimeter 2

OPTICAL FIBER COMMUNICATION

& MICROWAVE ENGINEERING

LAB

Faculty Incharge: Er. Sunita Rani, Assistant Professor

Er. AshwaniSingla, Assistant Professor

Attendent: Mrs. Gurmail Kaur

INTRODUCTION

This lab provides students an opportunity to have a detailed practical study on microwave

equipment’s, optical devices and their application. Microwave Lab is equipped with

following equipments: Klystron Based Microwave Test Bench, Gun Diode Based Microwave

Bench, Elementary Fiber Optic Trainer Signal Channel Kit, Advanced Fiber Optic Trainer

Kit, Laser Optics Trainer Kit, Basic Digital Link based Kit, Optical Power Meter, Basic

Analog Link based Kit, Voice Transmitter/Receiver Trainer using Fiber Optic Cable,

Cathode Ray Oscilloscopes (CRO), Function Generator, Digital Multimeter and Analog

Multimeter.

OPTICAL FIBER COMMUNICATION & MICROWAVE ENGINEERING LAB

LIST OF EQUIPMENT:

Sr. No. Name of Equipment Quantity

1 Klystron Based Microwave Test Bench 1

2 Gun Based Microwave Test Bench 1

3 Klystron Based with Various Anteena Microwave Test Bench 1

4 Microwave Bench Gun Based 1

5 Microwave Test Bench klystron Based 1

6 Elementary Fiber Optic Trainer Signal Ch. 1

7 Advanced Fiber Optic Trainer- Dual Ch. 1

8 Laser Optics Trainer 1

9 Basic Digital Link 1

10 Optical Power Meter 2

11 Basic Analog Link 1

12 Voice Transmitter/Receiver Trainer Using Fiber Optic Cable 1

13 Cathode Ray Oscilloscope(CRO) 3

14 Function Generator 3

15 Digital Multimeter 3

16 Analog Multimeter 2

COMMUNICATION SYSTEMS LAB

Faculty Incharge: Er. Parminder SinghJassal, Assistant Professor

Er. Candy Goel,Assistant Professor

Attendent: Mr. Buta Singh

INTRODUCTION

This lab consistsanalog - digital communication systems lab and Wireless & Mobile

Communication Lab

Analog - digital communication systems lab is intended to make students conversant with the

techniques and instrumentation employed for measuring the performance and properties of

digital communication systems and to provide practical experience with the components and

sub-systems utilized in a digital communication system. Communication lab is equipped with

PAM Modulator & Demodulator Kits Me-743, Amplitude Modulation & Demodulation

Trainer Kit, Pulse Width Modulation & Demodulation Me 744, Frequency Modulation &

Demodulation Trainer, Pulse Position Modulation & Demodulation ME 745, Balanced

Modulator/DSB-SC Trainer, Study Of Adaptive Delta Modulation & Demodulation,

DSB/SSB AM Transmitter Trainer, Analog Signal Sampling & Reconstruction, DSB/SSB

AM Receiver Trainer, Frequency Division Multiplexer &Demultiplexer, Phase Modulation &

Demodulation, TDM Pulse Code Modulation Transmitter Trainer, TDM Pulse Code

Modulation Reciever Trainer, Data Formatting & Carrier Modulation Transmitter, Carrier

Demodulation and Data Reformatting Receiver Trainer, TDM Pulse Amplitude

Modulation/Demodulation Trainer Kit, ASK Modulation/Demodulation Kit, PSK

Modulation/Demodulation Kit, FSK Modulation/Demodulation Kit, QPSK

Modulation/Demodulation Kit, DPSK Modulation/Demodulation Kit, Motorised Antenna

Trainer, Multiplexer/Demultiplexer Coder/Decoder Trainer Kit.

ANALOG & DIGITAL COMMUNICATION SYSTEMS LAB

Wireless & mobile communication labis furnished with latest equipments related to design

and implementation of wireless systems. GSM Trainer with Interface & Software, GPS

Trainer, Mobile Phone Trainer, Microstrip Antenna Trainer.

WIRELESS & MOBILE COMMUNICATION LAB

LIST OF EQUIPMENT:

Sr. No. Name of Equipment Quantity

1 CDMA-DSSS Trainer With Bermeas 1

2 GSM Trainer With Interface & Software 1

3 GPS Trainer 1

4 Mobile Phone Trainer 1

5 MicrostripAnteena Trainer 1

6 PAM Modulator & Demodulator Kits Me-743 1

7 Amplitude Modulation & Demodulation Trainer 4

8 Pulse Width Modulation & Demodulation Me 744 1

9 Frequency Modulation & Demodulation Trainer 4

10 Pulse Position Modulation & Demodulation ME 745 1

11 Balanced Modulator/DSB-SC Trainer 1

12 Study Of Adaptive Delta Modulation & Demodulation 1

13 DSB/SSB AM Transmitter Trainer 1

14 Analog Signal Sampling & Reconstruction 1

15 DSB/SSB AM Receiver Trainer 1

16 Frequency Division Multiplexer &Demultiplexer 1

17 Phase Modulation & Demodulation 4

18 TDM Pulse Code Modulation Transmitter Trainer 1

19 TDM Pulse Code Modulation Reciever Trainer 1

20 Data Formatting & Carrier Modulation Transmitter 1

21 Carrier Demodulation And Data Reformatting Receiver Trainer 1

22 TDM Pulse Amplitude Modulation/Demodulation Trainer 1

23 ASK Modulation/Demodulation Kit 1

24 PSK Modulation/Demodulation Kit 1

25 FSK Modulation/Demodulation Kit 1

26 QPSK Modulation/Demodulation Kit 1

27 DPSK modulation/Demodulation Kit 1

28 MotorisedAnteena Trainer 1

29 MULTIPLEXER/DEMULTIPLEXER. CODER/DECODR TRAINER 1

30 Cathode Ray Oscilloscope(CRO) 5

31 Function Generator 4

32 Digital Multimeter 3

33 Analog Multimeter 2

34 DSO 1

CIRCUIT THEORY & POWER

ELECTRONICS ENGG. LAB

Faculty Incharge: Er.GurpreetBharti Assistant Professor

Instructor: Er. Pardeep Kumar Jindal

Attendent: Mrs. Rajwinder Kaur

INTRODUCTION

The purpose of this lab is to provide knowledge on power electronics & circuit theory and

their applications in power and circuit engineering. Wein Bridge Oscillator kit, Phase Shift

Oscillator, Thermistor/AD 590 Kit, Colpit Oscillator, Experiment Kit, Superposition

Theorem Kit , Study of Hartley oscillator, SCR Single phase full wave fully controlled

bridge rectifier trainer, Norton’s theorem kit , Thevenin theorem kit , Maximum Power

Transfer Theorem kit , Reciprocity theorem kit , Millman’s theorem kit , Kirchoff’s voltage

law (KVL) trainer Kit, Kirchoff’s current law (KCL) trainer kit, SCR phase control trainer,

SCR based motor speed control trainer SCR triggering circuit trainer, Diac characteristics

trainer, Diac and Triac based fan regulator trainer Kit, Diac and Triac based lamp control

trainer Kit, SCR based JONE’S Chopper, Thyristor Circuit Breaker With Current Limiting

Trainer Kit, Triac Phase Control Trainer, DC Motor Speed Control Trainer Kit, Single Phase

Dual Converter Trainer Kit, UJT Trainer Kit, SCR V-I Characteristic Trainer Kit, Triac

Characteristic Trainer Kit, Variable Variac Auto Transformers Single Phase 2 amp, Cathode

Ray Oscilloscope (CRO) Function Generator, Digital Multimeter, Analog Multimeter

CIRCUIT THEORY & POWER ELECTRONICS ENGG. LAB

LIST OF EQUIPMENT:

Sr. No. Name of Equipment Quantity

1 Wein Bridge Oscillator 3

2 Phase Shift Oscillator 3

3 Therminster/ AD 590 Kit 1

4 Collpit Oscillator Experiment Kit 3

5 Superposition Theorem Kit AC N/W 3

6 Study of Hartley oscillator 4

7 SCR Singal phase full wave fully controlled bridge rectifier trainer 1

8 Norton’s theorem kit AC N/W 4

9 Thevening’s theorem kit AC N/W 4

10 Maximum power transfer theorem kit AC N/W 4

11 Reciprocity theorem kit AC N/W 4

12 Millman’s theorem kit AC N/W 4

13 Kirchoff’s voltage law (KVL) trainer kit 3

14 Kirchoff’s current law (KCL) trainer kit 3

15 SCR phase control trainer 1

16 SCR based motor speed control trainer 1

17 SCR triggering circuit trainer 1

18 Diac characteristics trainer 1

19 Diac and traic based fan regulator trainer 1

20 Diac and traic based lamp control trainer 1

21 SCR based JONE’S Chopper 1

22 Thyristor Circuit Breaker With Current Limiting Trainer 1

23 Traic Phase Control Trainer 1

24 DC Motor Speed Control Trainer 1

25 Single Phase Dual Converter Trainer 1

26 UJT Trainer 1

27 SCR V-I Characteristic Trainer 1

28 Traic Characteristic Trainer 1

29 Variable Variac Auto Transformers Single Phase 2 amp 2

30 Cathode Ray Oscilloscope (CRO) 5

31 Function Generator 3

32 Digital Multimeter 3

33 Analog Multimeter 2

MEASUREMENT SCIENCE &

TECHNIQUES AND ELECTRONICS

WORKSHOP LABS

Faculty Incharge: Er. Jasbir Singh, Assistant Professor

Dr. Yadwinder Kumar,Assistant Professor

Attendent: Mrs. Rajwinder Kaur, Mrs. Gurmail Kaur

INTRODUCTION

This lab provides an introduction to modern measurement techniques, data acquisition and

use of different measuring instruments as it contains equipment’s like Photo Cell

Characteristics Apparatus, Strain Gauge Trainer, Electro Magnetic PICK- UP Based Speed

Measurement Trainer, Temperature Transducer Trainer, Study of Piezo Electric Transducer,

Study of Hall Effect Sensor, LVDT Trainer, Optical Transducer Trainer, Lod Cell Trainer,

PLC (Programmable Logic Controller) with CPU/EEPROM/24 I/O Lines ,Cathode Ray

Oscilloscope (CRO), Function Generator, Digital Multimeter, Analog Multimeter, Soldering

de-soldering pump.

MEASUREMENT SCIENCE & TECHNIQUES AND ELECTRONICS WORKSHOP

LABS

LIST OF EQUIPMENT:

Sr. No. Name of Equipment Quantity

1 Photo Cell Characteristics Apparatus 3

2 Strain Gauge Trainer 1

3 Electro Magnetic PICK- UP Based Speed Measurement Trainer 1

4 TemperatureTransducer Trainer 1

5 Study of Piezo Electric Transducer 1

6 Study of Hall Effect Sensor 1

7 LVDT Trainer 1

8 Optical Transducer Trainer 1

9 Load Cell Trainer 1

10 PLC(Programmable Logic Controller) withCPU/EEPROM/24 I/O Lines 7

11 Cathode Ray Oscilloscope (CRO) 4

12 Function Generator 3

13 DigitaLMultimeter 3

14 Analog Multimeter 2

15 PCB Art Work Film Maker 1

16 PCB Curing Machine (OVEN) 1

17 Photo Resist Dip Coating Machine 1

18 Photo ETCH Etching Machine 1

19 Double Sided UV Exposure Unit 1

20 PCB Drilling Machine 1

21 PCB Shearing Machine 1

22 Roller Tinning Machine 1

23 Electronic Work Station 1

24 Digital Antistatic Soldering Station 1

25 Soldering Station Maintenance Centre 2

26 Digital AntistaticSoldering Station 5

27 Antistatic Soldering Station With Temperature Control 2

DIGITAL SYSTEM DESIGN &

DIGITAL SIGNAL PROCESSING

LAB

Faculty Incharge: Dr. NavdeepGoel, Assistant Professor

Technical Assistant: Er. Manpreet Singh

Attendent: Mr. Sukhcharan Singh

INTRODUCTION

This lab renders the services of software and hardware tools required for design and

implementation of digital circuits, signal processing and image processing algorithms. This

lab contains equipments like HP Desktop Computers with 17 inch TFT, CPLD Development

Platform, Double conversion online UPS, VLSI development platform, DSP trainer kit (TMS

320-5X series), TMS 320 LF 2407, CCS based on DSP 5X series, MATLAB 7.4 Software &

Tools, MULTISIM 10.0 Software, OPTISIM V5.1 Software, ORCAD Software with

hardware key lock etc.

DIGITAL SYSTEM DESIGN & DIGITAL SIGNAL PROCESSING LAB

LIST OF MAJOR SOFTWARE AND HARDWARE:

Sr. No. Software/Hardware Details Quantity

1 HP Desktop Computer 2280 14

2 HP Desktop Computer 7380 10

3 CPLD Development platform 1

4 Double conversion online UPS 1

5 VLSI development platform 1

6 DSP trainer kit (TMS 320-5X series) 5

7 TMS 320 LF 2407 5

8 CCS based on DSP 5X series 1

9 Mat Lab 7.4 Software & Tools 5 User

License

10 Multisim 10.0 Software 10 Users

License

11 Optisim V5.1 Software 5 Users

License

12 Orcad Software with hard key lock 01