Ledwood Protective Coatings LimitedLedwood Protective Coatings LimitedLedwood Protective Coatings LimitedLedwood Protective Coatings Limited

Waterloo Industrial Estate, Pembroke Dock

Pembrokeshire SA72 4RR, UK

T T T T +44 (0)1646 623600

F F F F +44 (0)1646 623699

E E E E wales@ledwood.co.uk

Client ListClient ListClient ListClient List

AccreditationsAccreditationsAccreditationsAccreditations

18001: 2007

9001 : 2008 Ledwood Protective CoatingsLedwood Protective CoatingsLedwood Protective CoatingsLedwood Protective Coatings

The largest purpose built Surface Preparation & Protective Coating Facilities in Wales.

Including temperature controlled painting booth, and automatic media recycling system

in the surface preparation facility. We also offer a complete service for on site surface

preparation & protective coating, including metal spray application.

Painting FacilityPainting FacilityPainting FacilityPainting Facility

Blasting FacilityBlasting FacilityBlasting FacilityBlasting Facility

FacilitiesFacilitiesFacilitiesFacilities Surface Preparation & CoatingsSurface Preparation & CoatingsSurface Preparation & CoatingsSurface Preparation & Coatings

Based at our Facility in Pembroke Dock, we have the capability to prepare and

complete coatings to a wide range of components and steel structures prior

to delivery to site. The Blast booth at over 55,000 cubic feet with internal

dimensions 33.4m x 8m x 6m high. The Painting booth is over 125,000 cubic

feet with internal dimensions of 39.5m x 12.0m x 7.4m high. The Facilities

have long run off and run in for large components and a reinforced floor to

take low loaders, with no size restrictions to the motorway network and

deepwater port facilities.

Larger components can be accommodated with tented cover. We operate a

comprehensive quality control system accredited to ISO 9001 and ISO 18001

as well as a behavioral safety policy, ensuring complete client satisfaction.

Services offered include:Services offered include:Services offered include:Services offered include:----

• SHOT BLASTING

• GRIT BLASTING

• ENVIRONMENTALLY CONTROLLED COATINGS

• BLAST CLEANING

• EPOXY AND POLYURETHANE COATINGS

• PIPE LINING

• PIPE WRAPPINGS

• FLAME METAL SPRAYING

•

Facilities available include:Facilities available include:Facilities available include:Facilities available include:----

• CRANAGE

• LARGE ITEM HANDLING CAPACITY

• SPRAYING BOOTHS

• HEAT TREATMENT FACILITIES

Typical Typical Typical Typical ProjectsProjectsProjectsProjects

Specification Expertise:Specification Expertise:Specification Expertise:Specification Expertise:---- Ledwood Protective Coatings are typically used by clients to support specification and design proposals by providing research from

our suppliers to develop solutions to specific exposure or performance requirements.

Ledwood Protective Coatings Ltd.,,,, are specialists in surface preparation

and protective coating application. Our key services include Blasting, Blasting, Blasting, Blasting,

Steel and Non Ferrous Preparation, Protective Coatings and Surface Re-Steel and Non Ferrous Preparation, Protective Coatings and Surface Re-Steel and Non Ferrous Preparation, Protective Coatings and Surface Re-Steel and Non Ferrous Preparation, Protective Coatings and Surface Re-

pairspairspairspairs.

Site WorkSite WorkSite WorkSite Work Ledwood Protective Coatings Ltd, are capable of applying highly specialised Surface Preparation and Coating Systems (e.g. Grit

Blasting, Hydro Jetting, Slurry Blasting, 100% solid, Airless, Metal Spray) necessary for the application of best practice protective

coating systems, throughout the UK and beyond.

Our CommitmentOur CommitmentOur CommitmentOur Commitment

Ledwood Protective Coatings philosophy of "right first time - every time" has enabled us to build strong repeat business relation-

ships with many clients. We have a strong project management, quality, safety and environmental record holding both ISO 9001

and ISO18001 accreditations.

Our staff and partners are available to ensure that your project is fully specified and planned to deliver the results you require.

All of our operatives are ICATS qualified (Industrial Coatings Applicator Training Scheme). Trained by our own in house SMT ICATS

Trainer. We are also Link up Approved.

Ledwood Protective Coatings are committed to our operating principles:

• Zero Tolerance policy for Safety Management

• Specification and Execution Excellence, Ensuring Product Reliability And Integrity

• Exceed Expectations - Getting It Right, First Time, On Time, All The Time!

QA/QCQA/QCQA/QCQA/QC We are committed to our customers and to carrying out our work to the highest standards. We are committed to maintaining our

ISO9001 registration and continually improving the effectiveness of our Quality Management System.

We are committed to running a sustainable long term business to finance continual improvement, training and organic growth whilst

ensuring our stakeholders can achieve an adequate return on their investment. This model provides for mutually beneficial long

term business relationships.

We recognize that our employees are the biggest assets of the company and we continue to develop all employees and have

achieved ‘Investors in People’ status. We will reward people on the basis of contribution and effort.

We will always expect the highest quality from our suppliers and in return treat them as we expect to be treated by our customers.

We are part of the community in which we operate. We display the highest ethical standards in all that we do. In particular, we

consider the interests of the general public and travelling public when operating and transporting products.

We understand our environmental responsibility and ensure, when given the opportunity, that we do not use products or methods

which damage the environment.

HSEHSEHSEHSE We fully accept our responsibilities to our employees to ensure, that risks to Health, Safety and welfare are reduced to an

acceptable level. In accordance with the Health and Safety at Work Act etc., 1974 and all relevant subsidiary legislation, ap-

proved codes of practice and guidance. This will normally require ensuring that safety systems comply ‘so far as is reasonably

practical’. In cases where mandatory action is required, the Directors will ensure that such action is implemented, monitored and

maintained via the Group Health Safety and Training Coordinator. The Directors recognise that:-

• It is a duty of the Group Health, Safety and Training Coordinator to ensure the implementation of the Health & Safety

Policy and its subsidiary components are adhered to and monitored.

• It is a duty of management to see that everything reasonably practicable is done to prevent personal injury, and to main-

tain a safe and healthy place of work.