LEMONAIDUPCYCLING - DIYBIKE RACKDURATION: 40 MIN · DEGREE OF DIFFICULTY: MEDIUM

1. Take the empty Lemonaid box first.

4. ... and 7 cm from the top..

8. Now draw saw lines on the upper and lower sides of the holes,...

3. Draw markings on the right side of the box - 4 cm from the front...

· 1 empty Lemonaid crate· Hole saw (50 mm)· Jig saw

· Sandpaper· Wooden board (see our “DIY Stool” tutorial)

7. ... and the right side.

5. Do the same on the left side of the box. 6. Drill a 50 mm wide hole with the hole saw at the intersection of the markings on the left side...

Equipment:

2. Draw a horizontal saw line on the front above and below the handle hole.

More Information:lemon-aid.de/diy

10. Saw along the resulting continuous lines from one side of the crate to the other.

13. Now just fix the rack to the wall with screws, hang up the bike - that’s it!

9. ... which connect to the respective lines on the front.

11. Sandpaper the edges. 12. Put the wooden plate (see our “DIY Stool” tutori-al) on the crate.