Lepide Exchange Recovery Manager - ComponentSource€¦ · Exchange Recovery Manager in applications or systems where Lepide Exchange Recovery Manager failure to perform can reasonably

Installation & Activation Guide

Lepide Exchange Recovery Manager

Lepide Exchange Recovery Manager Installation & Activation Guide

© 2015 Lepide Software Private Limited

© Lepide Software Private Limited, All Rights Reserved

This User Guide and documentation is copyright of Lepide Software Private Limited, with all rights

reserved under the copyright laws. This user guide cannot be reproduced in any form without the

prior written permission of Lepide Software Private Limited. No Patent Liability is assumed,

however, with respect to the use of the information contained herein.

Warranty Disclaimers and Liability Limitation

Lepide Exchange Recovery Manager, and any and all accompanying software, files, data and

materials, are distributed and provided AS IS and with no warranties of any kind, whether

expressed or implied. In particular, there is no warranty for any harm, destruction, impairment

caused to the system where Lepide Exchange Recovery Manager is installed. You acknowledge that

good data processing procedure dictates that any program, including Lepide Exchange Recovery

Manager, must be thoroughly tested with non-critical data before there is any reliance on it, and you

hereby assume the entire risk of all use of the copies of Lepide Exchange Recovery Manager covered

by this License. This disclaimer of warranty constitutes an essential part of this License. In addition,

in no event does Lepide Software Private Limited authorize you or anyone else to use Lepide

Exchange Recovery Manager in applications or systems where Lepide Exchange Recovery Manager

failure to perform can reasonably be expected to result in a significant physical injury, or in loss of

life. Any such use is entirely at your own risk, and you agree to hold Lepide Software Private

Limited harmless from any and all claims or losses relating to such unauthorized use.

Trademarks

Lepide Exchange Recovery Manager is a copyright work of Lepide Software Private Limited.

Windows 95®, Windows 98®, Windows ME®, Windows NT®, Windows XP®, Windows Vista®,

Windows 7®, Windows 8®, Windows 2000 Server®, Windows 2000 Advanced Server®, Windows

Server 2003®, Windows Server 2008®, Windows Server 2008 R2 ®, Windows Server 2012®,

Windows Server 2012 R2 ®, Office 365®, Exchange 2000 Server®, Exchange Server 2003®, Exchange

Server 2008®, Exchange Server 2010®, Exchange Server 2013®, Microsoft Office®, Microsoft

Outlook®, Microsoft Outlook 2000®, Microsoft Outlook 2003®, Microsoft Outlook 2007®, Microsoft

Outlook 2010®, Microsoft Outlook 2013®, Microsoft Outlook 2016®, PST, OST, OWA®, Outlook

Web Access®, Microsoft Word®, Exchange Management Tools, Exchange 2010 Management

Tools®, Exchange 2013 Management Pack®, .NET ®, IIS®, Windows PowerShell®, Microsoft

Management Console®, and Windows Management Framework® are registered trademarks of

Microsoft Corporation. Intel and Pentium are the registered trademarks of Intel Corporation. All

brand names, product names, logos, registered marks, service marks and trademarks appearing in



this document are the sole property of their respective owners. These are purely used for

informational purposes only. We have compiled a list of such trademarks but it may be possible that

few of them are not listed here.

Contact Information

Email: [email protected]

Website: http://www.lepide.com

http://www.lepide.com/



Contents

1. Introduction ..................................................................................................................................................... 5

1.1 Purpose of this Document ...................................................................................................................... 5

1.2 Points of Contact ...................................................................................................................................... 5

2. System Requirements ..................................................................................................................................... 5

2.1 Minimum System Requirements ........................................................................................................... 5

2.2 Supported Platforms ................................................................................................................................ 5

3. Installing Lepide Exchange Recovery Manager ........................................................................................ 9

4. Uninstalling Lepide Exchange Recovery Manager .................................................................................... 22

4.1: Uninstalling Lepide Exchange Recovery Manager from Windows Start Menu .......................... 22

4.2: Uninstalling Lepide Exchange Recovery Manager from Control Panel ....................................... 24

5: Activating Software License ....................................................................................................................... 26



1. Introduction

Welcome to the Installation Guide of Lepide Exchange Recovery Manager

In this installation guide, we have covered installation of Lepide Exchange Recovery Manager.

Apart from the installation of software, the un-installation process of software is also included in this

Installation Guide.

1.1 Purpose of this Document

The purpose of this document is to guide you through the process of installation and un-installation

of Lepide Exchange Recovery Manager.

1.2 Points of Contact

For software related queries, you can contact us via email or phone.

Helpline: +1-800-814-0578

Send an Email:

General Queries: [email protected]

Sales: [email protected]

Technical Support: [email protected]

2. System Requirements

Before you start installing Lepide Exchange Recovery Manager, make sure that your computer

meets the following requirements.

2.1 Minimum System Requirements

Pentium Class Processors

2 GB RAM

100 MB free space for software installation

Outlook should be installed on the system where LERM is installed

2.2 Supported Platforms

One of the following Windows operating systems (32/64-bit version):

Windows® XP Professional

mailto:[email protected]



Windows Server® 2000



Windows Server 2008 R2

Windows Vista®

Windows 7

Windows 8

Windows 8.1

Windows 10

Windows Server 2012

Windows Server 2012 R2

The Following Exchange Server supported with Outlook version (32/64-bit version):

Microsoft® Exchange Server 2000 and 2003 (Microsoft Outlook 2000 or higher)

Microsoft® Exchange Server 2007 (Microsoft Outlook 2003 or higher)




For working with Office 365:

Outlook version 2007 SP2,2010 SP1, Outlook 2013, Outlook 2016

.NET Framework 3.5 SP1 or later

Windows PowerShell

Required prerequisites to enable the functioning of Lepide Exchange Recovery Manager for different

Exchange Servers are listed below:

NOTE: Below mentioned requirements are relevant only if you are going to use Live

Exchange environment. For all other usages (offline EDB, OST and PST) you only need to

have any version of Outlook installed and configured on the system.



Exchange Server Software Required Prerequisites

Exchange Server 2000 Exchange Server 2000

Management Tools

Outlook 2000, 2002(XP) and 2003

Windows® 2000 Administrative Tools


Management Tools

Outlook 2002(XP), 2003 and 2007

Internet Information Server (IIS)

Windows Server® 2003 SP1

Administrative Tools Pack


Management Tools

Outlook 2003, 2007, 2010 and 2013

IIS

Microsoft® .NET Framework 2.0

Microsoft® Management Console (MMC

3.0)

Windows® Power Shell 1.0

Exchange Server 2010 Exchange 2010

Management Tool

Outlook 2007, 2010, 2013 and 2016

IIS 6 Management Console

.NET Framework 3.5 SP1

Windows Management Framework Core

(KB968930) - includes Power Shell 2.0 and

WinRM 2.0


Management Tool

Outlook 2007, 2010, 2013 and 2016

IIS 6 Management Console or later

Microsoft .NET Framework 3.5 SP1 or

later

Windows Management Framework 3.0 or

later



Supported Virtual Environments:

VMware® Server 1.0x, 2.x

VMware® Workstation v6.0x for Windows

Hyper-V

Microsoft® Virtual PC 2007

VMware® ESX 4.0, ESXi


Management Tool

Outlook 2010, 2013 and 2016

IIS 6 Management Console or later

Microsoft .NET Framework 4.5.2

Windows Management Framework 4.0 or

later



3. Installing Lepide Exchange Recovery Manager

Before you start installing software, make you sure that software installer file is available on your

computer. If the file is not available then you can download the file from -

http://www.lepide.com/exchange-manager/

After you have downloaded the installer file, execute the following steps to install software:

1. Click on “Run” to start the installation process with the following wizard. Click “Next” to

proceed further.

2. Select “I accept the agreement” option and click “Next” to continue.

http://www.lepide.com/exchange-manager/



3. Now select the destination location, where software will be installed. To change the

destination location, click “Browse” button and select the preferred location. Click “Next”

once you’re done.



4. This wizard lets you customize the shortcut folder. Click “Next” once you’re done.



5. Here you can select the required additional tasks such as to create icons on the desktop and

Quick Launch bar. Click “Next” to proceed.



6. The wizard is now ready to start the installation process. Click “Install” button.



7. The installation process will be started.



8. When the installation process completes, the message “Completing the Lepide Exchange

Recovery Manager Setup Wizard” appears on software installation window. Click the

“Finish” button to launch software.



9. Click the Finish button to launch software. Welcome Screen of Lepide Exchange Recovery

Manager Software appears.



Once software has been installed, you need to add Source and Destination to migrate the emails and

other contents from the Source to the Destination. Follow the below given steps to add Source:

10. Click “Add Source” option on the toolbar. Add Source window opens up. You can select any

of these as Source: Offline EDB, Offline OST, Outlook PST, Live Exchange (single and

multiple mailboxes), Live Exchange Public Folder, and OWA/Office 365.



11. Select your source as per requirement and click Next. The rest of the steps depend on the

choice you make here. Complete the Add Source process by following the wizard. The

following figure shows Office 365 added as Source.



Once the Source has been added, you can perform all the supported functions of Lepide

Exchange Recovery Manager. However, before you can restore or migrate any data, you

need to add the destination to software. To add destination:

12. Click “Add Destination” option on the tool bar. Add Destination wizard opens up. You can

add any of these as destination: Existing PST, New PST, Live Exchange (Single and Multiple

mailboxes), Live Exchange (Public Folder) and OWA/Office 365.



13. Select the destination from the list and click “Next". The Rest of the steps depend on the

choice that you make in this step. Complete the wizard by following the remaining steps. The

following figure shows Office 365 added to the destination.



Once the Source and Destination have been added, you can perform all the supported functions

with Lepide Exchange Recovery Manager.



4. Uninstalling Lepide Exchange Recovery Manager

In case, you need to uninstall Lepide Exchange Recovery Manager, follow the instructions

mentioned below.

Before you start uninstalling Lepide Exchange Recovery Manager, make sure that software is

not running on your system in the background. In addition, kindly kill its process LERM.exe

from the Task Manager.

Software can be uninstalled from your system in the following two ways:

Uninstall through Windows Start Menu

Uninstall through Control Panel

4.1: Uninstalling Lepide Exchange Recovery Manager from Windows Start Menu

To remove the Lepide Exchange Recovery Manager Software from Start Menu follow the

instructions below:

1. Click Start > All Programs > Lepide Exchange Manager > Uninstall Lepide Exchange

Recovery Manager. A confirmation message appears to let you affirm the un-installation

process.

2. Click the “Yes” button to uninstall software.



3. When software is removed, you’ll receive the following message box.

4. Click the “OK” button to finish the un-installation process.



4.2: Uninstalling Lepide Exchange Recovery Manager from Control Panel

To remove the Lepide Exchange Recovery Manager Software from Control Panel, follow the steps

below:

1. Click Start -> Control Panel. The Control Panel window appears.

2. Double click the Add or Remove Programs icon. A list of the programs installed on your

computer appears.

3. Select Lepide Exchange Recovery Manager and click the “Uninstall” button. A confirmation

message before un-installing software appears on the screen.

4. Click the Yes button to uninstall software.



5. The following message box will confirm the successful un-installation of software.

6. Click the “OK” button to complete the un-installation process.

To remove the remaining elements delete its program installation folder manually and then empty

the Recycle Bin as well.

%ProgramFiles%\Lepide Exchange Recovery Manager– for 32-bit OS

%ProgramFiles(x86)%\Lepide Exchange Recovery Manager– for 64-bit OS

After following the above steps, Lepide Exchange Recovery Manager will be uninstalled successfully

from your computer system.



5: Activating Software License

Lepide Exchange Recovery Manager is also available in trial version. It works just like the full

version but there are some limitations on further functionalities. The trial version transfers only 2

messages per folder/per session, you cannot save the search results, also, extract data cannot be

saved.

LERM is available in Standard and Professional editions. Standard edition comes with certain

limitations while Professional edition has no feature limitations.

To purchase license, you can contact our sales team at: [email protected].

After installing the trial version of software, if you want to generate license code for full version,

follow these steps:

1. Right-click on any of the added source items (EDB, OST, PST, Live Exchange, and Office

365). If a source is not already added, add a source and right-click on it. In the popup menu

select “Generate License Code”.




2. Generate License code dialog box opens up. All the items present in the Source list will be

displayed in the dialog box. Select all the items for which you want to generate the license

code. In the below given screenshot we have selected an EDB file and an Exchange Server. To

generate license code for OSTs select “License for OST” checkbox.



3. Click “OK”.

4. The following message appears. LERM License file named as (Lepide Exchange Recovery

Manager.out) is saved on the desktop. Click on the OK button to close the window.

5. Email the License.out file to Lepide Software sales team at: [email protected]. After making

the purchase Lepide Software will send you a license activation file. Save that file on the local

disk.

6. To activate the license, launch Lepide Exchange Recovery Manager.

7. Click on Help-> Activate Software… menu option.




8. Browse the license activation file from where it is located.



9. All the fields in Activate software window get populated as per license purchased. OST

license information is displayed in the bottom field. Order number field is also populated.

Click on “Activate”.

10. License Applied Successfully message box is displayed. Click on “OK” to close the window.



Thus, you can successfully activate the license for Lepide Exchange Recovery Manager.

Documents

Lepide Exchange Recovery Manager - ComponentSource€¦ · Exchange Recovery Manager in applications or systems where Lepide Exchange Recovery Manager failure to perform can reasonably