11
Lesson 3 Bar and Service Equipment Sourcing, maintenance and operations

Lesson 3 Bar and Service Equipment Sourcing, maintenance and operations

Embed Size (px)

Citation preview

Page 1: Lesson 3 Bar and Service Equipment Sourcing, maintenance and operations

Lesson 3Bar and Service Equipment

Sourcing, maintenance

and operations

Page 2: Lesson 3 Bar and Service Equipment Sourcing, maintenance and operations

Lesson 3: Bar and Service Equipment

Lesson Overview

3.1 Introduction 3.2 Bar area – large equipment 3.3 Bar area - small equipment and utensils 3.4 Glassware 3.5 Food service equipment

Conclusion

References

Page 3: Lesson 3 Bar and Service Equipment Sourcing, maintenance and operations

Lesson 3: Bar and Service Equipment

Aims and Learning Outcomes of the Lesson

On completion of this lesson the learner will be expected to be

able to; Describe the various types of large and small equipment within the bar

area

Explain the use and maintenance of bar equipment

Identify the major glassware types available within the bar area

identify food service equipment and broadly explain their relevant use in the food service area.

Page 4: Lesson 3 Bar and Service Equipment Sourcing, maintenance and operations

Lesson 3: Bar and Service Equipment

3.1 Introduction

The storage, preparation and service of food and beverages in the bar and food service areas involves understanding how to source, maintain and operate various pieces of small and large food and beverage equipment

This is crucial to the practice of good service and to delivering food and drink products to the highest standards in the bar.

This equipment can differ depending on the food and drinks to be prepared and served

The equipment can also depend on the particular type of bar and dining areas involved for example if the bar and food service areas are located within a hotel, restaurant, cruise liner, night club or cinema.

Page 5: Lesson 3 Bar and Service Equipment Sourcing, maintenance and operations

Lesson 3: Bar and Service Equipment

3.2 Bar Area – Large Equipment

Glass washing machines: best practices (chapter 3 – pp. 33-34). Ice making machines and ice purity: best practices (chapter 3 – pp. 34-

36), functions, types of ice, food safety and ice, Fridges, cabinet coolers: best practices (chapter 3 – pp. 36-37),

environment awareness. Hot drinks and coffee making machines: best practices (chapter 3 –

pp. 37-38).

Cleaning coffee machines and training: best practices (chapter 3 – pp. 38).

Fig 3.1: double group handle barista coffee machine

Page 6: Lesson 3 Bar and Service Equipment Sourcing, maintenance and operations

Lesson 3: Bar and Service Equipment

3.3 Bar Area - Small Equipment and Utensils

Small equipment and utensils used in the bar - practice procedures (chapter 3 – pp. 39-46) Bar spoons: Bar condiment units: Boston cocktail shaker (2 cones): Canelle knife: Chopping boards – colour coded: Classic hawthorn strainer: Dash and bitter bottles: Electric blender and liquidizers: Electric drinks mixer: Ice tongs and ice shuffles: Ice crushers Electric Juice Extractors: Manual citrus fruit squeeze or juice extractor Mixing glass set: Muddlers: Nutmeg grater Save-or Serve (juice containers): Standard cocktail shaker (cobbler shaker) Hand Held Spirit measures Spirit pourer Stacking rimming trays: Paring knife Speed bottle rails Spirit optic brackets Waiter’s friend: Zester:

Page 7: Lesson 3 Bar and Service Equipment Sourcing, maintenance and operations

Lesson 3: Bar and Service Equipment

3.4 Glassware

One of the most important elements which directly contributes to the overall enjoyment of all drinks, Shapes, sizes and colours add a certain theatre to the drinking and dining experience. Most of the glasses, used in the bar, are known as pressware (slow cooling to stabilize and strengthen the glass,

removing stress points). Figure 3.19 Glassware selection

Page 8: Lesson 3 Bar and Service Equipment Sourcing, maintenance and operations

Lesson 3: Bar and Service Equipment

3.4 Glassware (Continued)

Glassware selection: best practices (chapter 3 – p. 46). Handling glassware (care and attention): best practices (chapter 3 – p. 47-48). Standard Bar Glass types / Styles Range of SizesBrandy balloon (snifter) 5oz - 7oz (15cl - 20cl).Bottle & draught Beer (pilsner, lido, conical, nonic, tulip) 6oz – 20oz (18cl – 60cl). Champagne flute 7 ½ oz -1/2oz (21cl). Goblet or Poco 8oz – 12oz (24cl - 36cl). Highball (slim Jim / tumbler / sling) 10, 12, 14, oz (30, 36, 42cl). Irish Coffee (heat resistant) 8oz (24cl). Old-Fashioned 7oz - 12oz (21cl – 36cl). Rocks / Granity 8oz – 12oz (24cl – 36cl). Martini 3, 5,7oz - (10cl,15cl, 21cl).

Shot (gin tumbler, granity, heavy, islande, carvella) 1 ¼ oz – 2oz (3.5cl - 6cl). Systems used for cleaning glassware Best practices (chapter 3 – p. 47) Washing glasses by hand (chapter 3 – p. 48) Evaluating bacterial build up on glassware (the water break test) (chapter 3 – p. 49)

Page 9: Lesson 3 Bar and Service Equipment Sourcing, maintenance and operations

Lesson 3: Bar and Service Equipment

3.5 Food Service Equipment Basic and special (cutlery) items / relevant usage: (chapter 3 – pp. 49-53). Basic and special tableware (crockery) items / relevant: (chapter 3 – pp. 49-53)

Page 10: Lesson 3 Bar and Service Equipment Sourcing, maintenance and operations

Lesson 3: Bar and Service Equipment

Conclusion

To deliver food and drinks with excellence and quality, management and staff members must understand how to identify and operate a large variety of large and medium sized food and beverage equipment.

This equipment can retain bacteria and eventually become contaminated which can lead to customers becoming ill.

Local government agencies are charged with the responsibility to inspect bars and licensed premises to ensure that all equipment is spotless and in good working order.

The variety and functionality of this equipment depends on the products sold and can differ from bar to bar,

Staff members must master the best practice procedures and maintenance of all food and beverage equipment and understand their importance to effective food and beverage service for customers

Page 11: Lesson 3 Bar and Service Equipment Sourcing, maintenance and operations

Lesson 3: Bar and Service Equipment

References Agar Hotel Shop. (2012) available http://agarwalhotelshopee.com/crockery.html#crockery [accessed 12/3/12]. Brown, G. Hepner, K. and Deegan, A. (1994) Introduction to Food and Beverage Service, Pearson Education Ltd:

England. Cousins, J. and Lillicrap, D. (2010) Essential Food and Beverage Service, London: Hodder Education. Murphy, J. (2006) ‘Glassware Management’, Licensing World, June, Jemma Publications Ltd: Dublin. Murphy, J. (2013) Principles and Practices of Bar and Beverage Management, Goodfellow Publishing Ltd,

Oxford: England. Murphy, J. (2013) Principles and Practices of Bar and Beverage Management – The Drinks Handbook,

Goodfellow Publishing Ltd, Oxford: England.

Web resources www.aDexref.com Refrigeration Company. www.ipbartenders.com Bar equipment and portable bars (Cantilever). www.kiscocktailbar.com Automatic Cocktail Bar. www.scea.com Specialty Coffee Association of Europe (SCEA). http://www.artofdrink.com/2007/02/is-glassware-a-barrier-to-cocktail-accep.php Glassware and cocktails. http://www.safework.sa.gov.au/uploaded_files/hospJobDict2Restaurants.pdf Analysis of regular tasks and

body movements in the bar, restaurant and hospitality industry.