Location & Visitation

Location & Visitation:We are located just off of Route 74 about three miles north of the town of Carlisle. Shop visitation is by

appointment only, so please call before you visit. We will work around your schedule as we are available on evenings and weekends.

To Order:You can call your order in at 717-249-1757.You can fax your order in at 717-249-2921.

You can email your order to [email protected].

Payment Methods:We accept cash, check, Visa, or Mastercard as payment. Credit cards that are declined are subject to a

fee. Bounced checks are subject to a $30.00 bank charge fee.

PA Sales Tax:Anyone living in the state of Pennsylvania must pay 6% sales tax unless a tax exemption certificate is on

file with us.

Shipping:We ship all of our packages UPS Ground. If an item is unavailable at the time of shipment, the item will be shown on the order as backordered. The item then will be shipped to you as soon as possible. No

backorders will be cancelled unless you advise us.

Returns & Exchanges:If you plan on returning an item, we ask that you notify us beforehand. Returns can be made for store

credit only. Special ordered items are not subject to return. There are absolutely no refunds on shipping charges, and the buyer is also responsible for paying the return shipping.

Pricing:Our pricing is subject to change at anytime without notice.

Warranty:There is no warranty, either expressed or implied, with respect to any of the products provided by

Fastener Specialties. All products and their respective parts are sold as is and with all flaws. The user shall assume all responsibility and risks associated with the purchase or use of any products supplied by

Fastener Specialties. The user shall also determine the suitability and safety of the product for its intended use. Fastener Specialties will not be liable for any loss, damage, injury, or death resulting from

the use of any of our products.

Call us at...

Fax us at...Email us at...

717-249-1757

717-249-2921

[email protected]

www.fastfasteners.com45 Pleasant Hall Road

Carlisle, PA 17013

POLICIES

page 1

RE-CM-5RE-CML-5

RE-CM-5-BKRE-CML-5-BK

RE-JM-5RE-JML-5

RE-ALJM-5RE-ALJML-5

Commercial SteelCommercial SteelCommercial SteelCommercial Steel

Premium SteelPremium Steel

AluminumAluminum

SilverSilver

BLACKBLACK

GoldGoldRedRed

Right HandLeft Hand

Right HandLeft Hand

Right HandLeft Hand

Right HandLeft Hand

5/16” Hole x 5/16”-24 Shank Male Rod Ends

NowAvailablein Black!RR-QMS-0700

RR-QMS-0725RR-QMS-0750RR-QMS-0775RR-QMS-0800RR-QMS-0825RR-QMS-0850RR-QMS-0875RR-QMS-0900RR-QMS-0925RR-QMS-0950RR-QMS-0975RR-QMS-1000RR-QMS-1025RR-QMS-1050RR-QMS-1075RR-QMS-1100RR-QMS-1125RR-QMS-1150RR-QMS-1175RR-QMS-1200RR-QMS-1225RR-QMS-1250RR-QMS-1275RR-QMS-1300RR-QMS-1325RR-QMS-1350RR-QMS-1375RR-QMS-1400RR-QMS-1425RR-QMS-1450RR-QMS-1475RR-QMS-1500RR-QMS-1525RR-QMS-1550RR-QMS-1575RR-QMS-1600RR-QMS-1625RR-QMS-1650RR-QMS-1675RR-QMS-1700RR-QMS-1725RR-QMS-1750RR-QMS-1775RR-QMS-1800RR-QMS-1825RR-QMS-1850RR-QMS-1875RR-QMS-1900RR-QMS-1925RR-QMS-1950RR-QMS-1975

7”7 1/4”7 1/2”7 3/4”

8”8 1/4”8 1/2”8 3/4”

9”9 1/4”9 1/2”9 3/4”10”

10 1/4”10 1/2”10 3/4”

11”11 1/4”11 1/2”11 3/4”

12”12 1/4”12 1/2”12 3/4”

13”13 1/4”13 1/2”13 3/4”

14”14 1/4”14 1/2”14 3/4”

15” 15 1/4”15 1/2”15 3/4”

16”16 1/4”16 1/2”16 3/4”

17”17 1/4”17 1/2”17 3/4”

18”18 1/4”18 1/2”18 3/4”

19”19 1/4”19 1/2”19 3/4”

RR-QMS-2000RR-QMS-2025RR-QMS-2050RR-QMS-2075RR-QMS-2100RR-QMS-2150RR-QMS-2350RR-QMS-2500

20”20 1/4”20 1/2”20 3/4”

21”21 1/2”23 1/2”

25”

Radius Rods - 1/2” OD x 5/16”-24 Tap

RR-QML-2350RR-QML-2375RR-QML-2400

23 1/2”23 3/4”

24”

Radius Rods5/8” OD x 3/8”-24 Tap

RE-CM-6-5RE-CML-6-5RE-RSM-5

RE-RSML-5

Commercial SteelCommercial Steel

Premium SteelPremium Steel

SilverSilverGoldGold

Right HandLeft Hand

Right HandLeft Hand

5/16” Hole x 3/8”-24 Shank Male Rod Ends

RE-QM-PK

RE-QM-PK-BK

(10) RE-CM-5 with Jam Nuts(10) RE-CML-5 with Jam Nuts

(10) RE-CM-5-BK with Jam Nuts(10) RE-CML-5-BK with Jam Nuts

Racer’s 5/16” Steel Rod End PacksWhen you purchase this rod end pack, you are getting the jam nuts for free!

NJ-S-5RNJ-S-5LNJ-S-6RNJ-S-6L

5/16”-245/16”-243/8”-243/8”-24

SilverGoldSilverGold

Right HandLeft Hand

Right HandLeft Hand

Steel Jam NutsSP-0504ASP-0506ASP-0508A

1/4” High3/8” High1/2” High

5/16” ID AluminumTapered Rod End

Spacers

W-SP-5

5/16” Tricklock SpacersNow Stainless Steel!

FS-27A

5/16” Spacer Kit

This kit includes the following in a clear compartmented case with a snap-shut lid:(25)- Tricklock Spacers(6)- 1/4” High Aluminum

Tapered Spacers(6) 3/8” High Aluminum

Tapered Spacers(6) 1/2” High Aluminum

Tapered Spacers

page 2

BR-502H-RRBR-502H-MM

BR-L21549/L21511

Rubber Seals - Premium C3 FitMetal Shields

Tapered Set (Cup & Cone)

5/8” Front Hub Bearings

BR-R20-RRBR-R20-RR-PREM-2

BR-R20-MM

Rubber Seals - StandardRubber Seals - Premium

Metal Shields

1 1/4” Rear Axle Bearings

KP-6-300KP-6-325

3/8” Shoulder x 3” Long Body3/8” Shoulder x 3 1/4” Long Body

King Pins

COM-6BR-R6-MM

3/8” ID Uniball Bearing3/8” ID Ball Bearing with Metal Shields

King Pin Bearings

SR-125-EXSR-125-EX-HD

SR-119-IN

1 1/4” External for Rear Axle - Standard1 1/4” External for Rear Axle - Heavy Duty

1 3/16” Internal for Steering Shaft - Standard

Snap Rings

COM-10COM-10T

5/8” ID Uniball5/8” ID Uniball with Teflon

Steering Shaft Bearings

SC-125-2ASC-125-2A-KY

SC-63-2SSC-75-2SSC-88-2S

1 1/4” Aluminum - Mill Finish1 1/4” Aluminum With Keyway - Mill Finish

5/8” Steel - Black3/4” Steel - Black7/8” Steel - Black

Shaft Collars - 2 Piece

Front Spindle SpacerKit - Black Aluminum

Front SpindleSpacer Kit - Steel

SP-KIT-QM-10S

This kit includes the following 5/8” ID gold spacers:

(2) - 1/8” High(2) - 1/4” High(2) - 3/8” High

(2) - .030” High(2) - .060” High

*These spacers are only available as a kit.

KEY-3KEY-4

KEY-3X4

3/16” x 3/16” x 12” Long1/4” x 1/4” x 12” Long

1/4” x 3/16” x 12” Long

Keystock

SP-2002ASP-2004ASP-2006ASP-2008ASP-2012ASP-2016A

1 1/4” ID x 1/8” Long1 1/4” ID x 1/4” Long1 1/4” ID x 3/8” Long1 1/4” ID x 1/2” Long1 1/4” ID x 3/4” Long1 1/4” ID x 1” Long

Rear Axle Spacers - Aluminum

Rear Axle SpacerKit - Aluminum

SP-KIT-QM

This kit includes the following 1 1/4” ID spacers:

(2) - 1/8” High(2) - 1/4” High(1) - 1/2” High(1) - 3/4” High(1) - 1” High

SP-KIT-QM-10A-BK

This kit includes the following 5/8” ID x 1” OD hard coat black anodized spacers:

(2) - 1/8” High(2) - 1/4” High(2) - 1/2” High

page 3

Front & Rear Hubs - All Include 1/4” Hardware

SH-04F-063SH-04F-075SH-04F-125

SH-BH-04F-063SH-BH-04F-075SH-BH-04F-125SH-BH-04F-150

SH-05F-125SH-05F-150

1/4”-28 X 5/8” Socket Head1/4”-28 x 3/4” Socket Head

1/4”-28 x 1 1/4” Socket Head

1/4”-28 X 5/8” Button Head1/4”-28 x 3/4” Button Head

1/4”-28 x 1 1/4” Button Head1/4”-28 x 1 1/2” Button Head

5/16”-24 x 1 1/4” Socket Head5/16”-24 x 1 1/2” Socket Head

Wheel Bolts - Alloy - Black

Quick Start Wheel Studs - Steel

1/4”-28 x 1 1/2” Reduced Hex Head Wheel Stud with Quick Start End

QM-04F-125-QS

Bullet Nose Wheel Studs -Titanium

1/4”-28 x 1 1/4” Wheel Stud with aBullet Nose & Hex Drive

TI-SET-8013

NF-04CNF-04F

NF-04F-NSNF-05C-NS

NF-05FNF-05F-NS

1/4”-20 Serrated1/4”-28 Serrated

1/4”-28 Non-Serrated - Smooth Flange5/16”-18 Non- Serrated - Smooth Flange

5/16”-24 Serrated5/16”-24 Non-Serrated - Smooth Flange

Flange Nuts

NL-NYT-10FTV-001

TV-21547TV-TOOL

5/8”-18 Spindle Nut“Shorty” Rubber Tire Valve

Replacement Valve Core - High TempTire Valve Core Replacement Tool

Wheel Hardware

HUB-QM-F-1HUB-QM-F-1-BK

HUB-QM-R-1HUB-QM-R-1-BK

Front Hub with Bearings & 1/4” Hardware - SilverFront Hub with Bearings & 1/4” Hardware - BlackRear Hub with Pinch Bolt & 1/4” Hardware - SilverRear Hub with Pinch Bolt & 1/4” Hardware- Black

1/4”-28 “Big” Lug Nuts

NF-04F-NS-BIG-BK

Ÿ 1/2” HexŸ 5/8” Flange ODŸ Smooth Flange

***PREMIUM***Quick Start Wheel Studs &

“Big” Lug Nuts

QM-04F-125-QS-US

NF-04F-NS-BIG-BK-US

1/4”-28 x 1 1/2” Socket Head withQuick Start Ends - Premium

1/4”-28 Smooth Flange Lug Nut with1/2” Hex - Premium

page 4

PLB-316PLB-316-BK

FC-68-3FC-69-3

FC-63PT-3FC-61-3FC-60-3

3/16” Plastic Tubing3/16” Plastic Tubing - BlackStraight Compression Fitting

90 Degree Compression FittingInternal Tube Support

Spare NutSpare Ferrule

Plastic Brake Line & Fittings

BL-30048BL-30054BL-30060

# 3 x 48” Long - Straight to Straight#3 x 54” Long - Straight to Straight#3 x 60” Long - Straight to Straight

Stainless Steel Braided Brake Lines

FRAG-581603FRAG-582303FRAG-582203

FRAG-481603-BKFRAG-482303-BKFRAG-482203-BK

Straight - Steel45 Degrees - Steel90 Degrees - Steel

Straight - Aluminum - Black45 Degrees - Aluminum - Black90 Degrees - Aluminum - Black

Brake Fittings - #3 x 1/8” MPT

***Measurements are made end to end***

These are the common lengths used on a quarter midget. We stock many other lengths. If you are looking for a

length not listed, please contact us.

Ultra Black Stainless Steel Brake Lines

These ultra black brake lines feature black line & all black fittings.

BL-30048-ULBL-30054-ULBL-30060-UL

# 3 x 48” Long - Straight to Straight - Black#3 x 54” Long - Straight to Straight - Black#3 x 60” Long - Straight to Straight - Black

Hose Cutters

PI-028

These are great for cutting plastic tubing!

Lightweight Fire Sleeve

QM-FIRE-SUSAC &QMA

APPROVED

Aluminum Fuel Filter

FF-QM-A-BK

These anodized black aluminum fuel filters feature a 1/4” barb and a cleanable bronze filter.

VL-QMV-90

VL-46900

VL-46903

AD-32038

AD-358424-AL

AD-32039

HC-M-004H-2100686

1/8” x 1/4” Barb Fuel Valve -90 Degree - Red Handle

1/8” MPT x 1/8” FPT Fuel Valve -Black Handle

1/4” MPT x 1/4” FPT Fuel Valve -Black Handle

1/8” MPT x 1/4” Barb Adapter -90 Degrees - Brass

1/8” MPT x 1/4” Barb Adapter -90 Degrees - Aluminum

1/4” MPT x 1/4” Barb Adapter -90 Degrees

Mini Hose Clamp for Fuel Line1/4” Premium Fuel Line - Superthane

Fuel System

Lightweight Fuel Valve

Ÿ 1/8” MPT x 1/4” BarbŸ 90 Degrees

Ÿ Compact & LightweightŸ Twist to OpenŸ Plated Steel

VL-QMV-90-LW

FRAG-482204-BKFRAG-200104-BKFRAG-870004-BK

#4 x 1/8” MPT - 90 Degree - Black#4 Pushlock - Straight - Black

#4 Pushlock Hose - Black

PushlockFuel

System

page 5

Exclusive!

Grade 8 Quarter Midget Bolt Kit

FS-26

This kit includes the following in a clear compartmented case with a snap-shut lid:(20)- 5/16”-24 x 1”

(6)- 5/16”-24 x 1 1/4”(6) 5/16”-24 x 1 3/4”

(25)- Thin Gold Locknuts

(4)- 5/16”-24 x 2”(4)- 5/16”-24 x 2 1/4”(4)- 5/16”-24 x 2 1/2”

(25)- AN Washers

BB-BH-008-100-SS-12PKBB-SH-008-100-SS-12PKBB-SH-008F-100-12PK

BB-BH-010-100-SS-12PKBB-SH-010-100-SS-12PKBB-HH-010-100-SS-12PK

8-32 x 1” Button Head - Stainless8-32 x 1” Socket Head - Stainless

8-32 x 1” Socket Head - Black Alloy10-32 x 1” Button Head - Stainless10-32 x 1” Socket Head - Stainless

10-32 x 1” Hex Head - Stainless

Bumper Bolt Kits

HHCS-05F-100-5HHCS-05F-125-5HHCS-05F-150-5HHCS-05F-175-5HHCS-05F-200-5HHCS-05F-225-5HHCS-05F-250-5

5/16”-24 x 1”5/16”-24 x 1 1/4”5/16”-24 x 1 1/2”5/16”-24 x 1 3/4”

5/16”-24 x 2”5/16”-24 x 2 1/4”5/16”-24 x 2 1/2”

Hex Head Bolts - Grade 5 - Zinc Silver

NL-NYT-5FNL-NYT-5F-BKNL-NYT-5F-G

NL-NY-5FW-AN-5

W-ANL-5W-SAE-5

5/16”-24 Thin Nylon-Insert Locknut5/16”-24 Thin Nylon-Insert Locknut - Black5/16”-24 Thin Nylon-Insert Locknut - Gold

5/16”-24 Full Nylon-Insert Locknut5/16” AN Washer - .060 Thickness

5/16” Thin AN Washer - .030 Thickness5/16” SAE Washer - Grade 2 - Zinc Silver

Locknuts & Washers

HHCS-05F-100-8HHCS-05F-125-8HHCS-05F-150-8HHCS-05F-175-8HHCS-05F-200-8HHCS-05F-225-8HHCS-05F-250-8

5/16”-24 x 1”5/16”-24 x 1 1/4”5/16”-24 x 1 1/2”5/16”-24 x 1 3/4”

5/16”-24 x 2”5/16”-24 x 2 1/4”5/16”-24 x 2 1/2”

Hex Head Bolts - Grade 8 - Gold

W-SP-5

5/16” Tricklock SpacersNow Stainless Steel!

Quarter Midget Hardware Kit

FS-8

This kit includes the following in a clear compartmented case with a snap-shut lid:

(6)- 5/16”-24 Right Hand Jam Nuts(6)- 5/16”-24 Left Hand Jam Nuts

(20)- 5/16” Tricklock Spacers(10)- 1/4”-28 Serrated Flange Nuts

(12)- 5/16”-24 Thin Nylon-Insert Locknuts(8)- 5/16”-24 Full Nylon-Insert Locknuts

(20)- 5/16” AN Washers(10)- 5/16” SAE Washers

(6)- 1/4”-28 x 5/8” Button Head Cap Screws(6)- 1/4”-28 x 1 1/4” Socket Head Cap Screws

Each kit includes (12) bolts and (12) thin nylon-insert locknuts.

Bulk bumper bolts and bulk nuts are available upon request.

page 6

5/16” Dzus ButtonsDZ-OH-5400

DZ-OHA-5400DZ-OHA-5400-BK

DZ-OH-5450DZ-OHA-5450

DZ-OHA-5450-BK


DZ-OHA-5500-BK

DZ-WH-5400

DZ-BIG-5400

.400

.400

.400

.450

.450

.450

.500

.500

.500

.400

.400

Slotted Oval HeadSlotted Oval HeadSlotted Oval Head



Winged Head

Big Head - 1” OD

SteelAluminumAluminum



Steel

Steel

SilverMill

Black

SilverMill

Black

SilverMill

Black

Silver

Silver

On/OFF Switch

EG-001EG-002

Hex Body Cable StopHonda Engine 3/4” Chrome Plug

Engine Hardware

EL-001

7/16” Dzus ButtonsDZ-OH-6400

DZ-OHA-6400DZ-OHA-6400-BK


DZ-OHA-5650-BK


DZ-OHA-6500-BK


DZ-OHA-6550-BK

DZ-WH-6500DZ-WH-6500-BK

DZ-WH-6550

.400

.400

.400

.450

.450

.450

.500

.500

.500

.550

.550

.550

.500

.500

.550





Winged HeadWinged HeadWinged Head





SteelSteelSteel

SilverMill

Black

SilverMill

Black

SilverMill

Black

SilverMill

Black

SilverBlackSilver

Great fortail tanks!

Dzus Tool - StandardDZ-T-001

Dzus Springs

DZ-S-5325DZ-S-6425

1”1 3/8”

For 5/16”For 7/16”

Re-Spring Kits

DZ-S-RESPRING-1DZ-S-RESPRING

1”1 3/8”

For 5/16”For 7/16”

This kit contains the following:(50)- Dzus Springs

(100)- Multi-Grip Rivets

DZ-TAB-100LRDZ-TAB-100FDZ-TAB-138LDZ-TAB-138RDZ-TAB-138F

Rivet HoleSpacing

1”1”

1 3/8”1 3/8”1 3/8”

ButtonDiameterFor 5/16”For 5/16”For 7/16”For 7/16”For 7/16”

Rectangular LightweightFull

LightweightRectangular Lightweight

Full

Weld Plates / Dzus Tabs

Taps

TAP-5FLTAP-5FRTAP-6FLTAP-6FR

5/16”-24 Left Hand5/16”-24 Right Hand


Dies

DIE-5FLDIE-5FRDIE-6FLDIE-6FR



Tap Sets

TAP-5-SETTAP-6-SET

5/16”-24 Tap Set3/8”-24 Tap Set

Each tap set includes(1) Right Hand & (1) Left Hand Tap.

Tail Tank /Hood Saver

This rivet-on stainless steel hood saver is for

standard size dzus buttons. The hole measures 0.433”.

HS-001

page 7

Double Ended Drill Bits

DPT-30DPT-11

1/8”3/16”

Safety Wire & Accessories

PI-001

PI-002

PI-003

Safety Wire - .032 Stainless Steel - One Pound Roll

Safety Wire Pliers

Safety Wire Drill Jig

ISC Racer’s Tape

RT-2001RT-2002RT-2003RT-2004RT-2005RT-2006RT-2008RT-2010

RT-2003NRT-2007NRT-2008NRT-2015NRT-8014RT-5001RT-5011

Standard DutyStandard DutyStandard DutyStandard DutyStandard DutyStandard DutyStandard DutyStandard DutyStandard DutyStandard DutyStandard DutyStandard Duty

Non-Skid

2” x 90’2” x 90’2” x 90’2” x 90’2” x 90’2” x 90’2” x 90’2” x 90’2” x 90’2” x 90’2” x 90’2” x 90’2” x 10’2” x 45’2” x 45’

RedBlue

YellowBlackSilverWhite

OrangePurple

Neon YellowNeon Green

Neon OrangeNeon Pink

Black SparkleCheckerboard- StandardCheckerboard- Angled

Pit Clips

*PC-050BPC-075BPC-100BPC-125BPC-150BPC-175BPC-200B

Holding Range3/8” to 1/2”5/8” to 7/8”

7/8” to 1 1/8”1 1/8” to 1 3/8”1 3/8” to 1 5/8”1 5/8” to 1 7/8”1 7/8” to 2 1/8”

Pit Clips are a parts holding system for trailers, pit carts, etc. These clips are black and UV protected so they can even be used outside. Some common uses are to hold radius rods, drag links, tie rods, shocks, wheel wrenches,

brooms, tools, and much more!

*Quarter Midget Radius Rod Size

Cable Ties - 100 PacksCT-4-18-N

CT-4-18-UVCT-4-18-BECT-4-18-RDCT-4-18-YWCT-4-18-OE

CT-7-50-NCT-7-50-UVCT-7-50-BECT-7-50-RDCT-7-50-YWCT-7-50-OECT-7-50-GYCT-7-50-PU

CT-7-50-NGNCT-7-50-NPKCT-7-50-NYWCT-7-50-NOE

4” White4” Black4” Blue4” Red

4” Yellow4” Orange

7” White7” Black7” Blue7” Red

7” Yellow7” Orange

7” Grey7” Purple

7” Neon Green7” Neon Pink

7” Neon Yellow7” Neon Orange

We also stock 11” & 14” cable ties.

Tire Stagger Tape

PI-008

This tire tape is 1/4” wide and 10’ long with a magnetic back.

Premium StanleyTire Stagger Tape

PI-040

Deburring Tool

PI-009

PI-009-EX

Deburring Tool withExtra BladeExtra Blades

K&N

PI-021PI-022

K&N Air Filter OilK&N Air Filter Cleaner

12.25 oz32 oz

Multi-Purpose ExtremePressure LubeCMD-3 4 oz Tube

Valco Threadlocker

TL-BLUE-STL-RED-S

Valco Blue - Medium Strength - 10mLValco Red - High Strength - 10mL

Daylube Grease

PI-050PI-051

4 Ounce Jar1 Ounce Syringe

Documents

Location & Visitation