Page 1 of 2

EASA Form 3 – 145 Issue 4

MAINTENANCE ORGANISATION APPROVAL CERTIFICATE

Reference: EASA.UK.145.01367 Pursuant to Regulation (EU) N° 2018/1139 of the European Parliament and of the Council and to Commission Regulation (EU) N°1321/2014 and subject to the conditions specified below, the European Union Aviation Safety Agency hereby certifies:

WILLIS ASSET MANAGEMENT LIMITED t/a WILLIS ENGINE REPAIR CENTRE – UK (WERC – UK)

AVIATION HOUSE BROCASTLE AVENUE

WATERTON INDUSTRIAL ESTATE BRIDGEND

VALE OF GLAMORGAN CF31 3XR

UNITED KINGDOM

as a maintenance organisation in compliance with Section A of Annex II (Part-145) of Regulation (EU) N° 1321/2014, approved to maintain the products, parts and appliances listed in the attached terms of approval and issue related certificates of release to service using the above references and, when stipulated, to issue recommendations and airworthiness review certificates after an airworthiness review as specified in point ML.A.0903 of Annex Vb (Part-ML) to that Regulation for those aircraft listed in the attached terms of approval.

CONDITIONS: 1. This approval is limited to that specified in the scope of work section of the approved

maintenance organisation exposition as referred to in Section A of Annex II (Part-145), and

2. This approval requires compliance with the procedures specified in the approved maintenance organisation exposition, and

3. This approval is valid whilst the approved maintenance organisation remains in compliance with Annex II (Part-145) of Regulation (EU) N° 1321/2014.

4. Subject to compliance with the foregoing conditions, this approval shall remain valid for an unlimited duration unless the approval has previously been surrendered, superseded, suspended or revoked.

Date of original issue: 01 January 2021 Date of this revision: -- Revision N°: Initial Signed:

For the European Union Aviation Safety Agency

Page 2 of 2

MAINTENANCE ORGANISATION TERMS OF APPROVAL

Reference: EASA.UK.145.01367

Organisation: WILLIS ASSET MANAGEMENT LIMITED t/a WILLIS ENGINE REPAIR CENTRE – UK (WERC - UK)

AVIATION HOUSE, BROCASTLE AVENUE, WATERTON INDUSTRIAL ESTATE, BRIDGEND, VALE OF GLAMORGAN, CF31 3XR, UNITED KINGDOM

EASA Form 3 – 145 Issue 4

CLASS RATING LIMITATION

ENGINES B1 Turbine CFM INTERNATIONAL CFM56-2/3/5/7 SERIES CFM INTERNATIONAL LEAP 1A/1B/C SERIES ENGINE ALLIANCE GP7200 SERIES GENERAL ELECTRIC CF6-80 SERIES GENERAL ELECTRIC CF34 8/10 SERIES GENERAL ELECTRIC GE90 SERIES GENERAL ELECTRIC GENX 1B/2B SERIES INTERNATIONAL AERO ENGINES (IAE) V2500 SERIES INTERNATIONAL AERO ENGINES (IAE) PW1000/1500G SERIES PRATT & WHITNEY PW100 SERIES PRATT & WHITNEY PW150 SERIES PRATT & WHITNEY PW4000 – 94/100 SERIES ROLLS-ROYCE RB211 524 SERIES ROLLS-ROYCE RB211 535 SERIES ROLLS-ROYCE RB211 TRENT 500/700/800/900 SERIES ROLLS-ROYCE TRENT 1000 SERIES ROLLS-ROYCE TRENT XWB SERIES

B3 APU HAMILTON SUNDSTRAND APS 1000 SERIES HAMILTON SUNDSTRAND APS 2300 SERIES HAMILTON SUNDSTRAND APS 3200 SERIES HAMILTON SUNDSTRAND APS 5000 SERIES HONEYWELL 36 SERIES HONEYWELL 131 SERIES HONEYWELL 331 SERIES PRATT & WHITNEY PW901A/C SERIES PRATT & WHITNEY PW980

This approval schedule is limited to those products, parts and appliances and to the activities specified in the scope of work section of the UK CAA approved maintenance organisation exposition,

Maintenance Organisation Exposition reference: WAM-MOE

Date of original issue: 15 NOVEMBER 2016

Date of last revision approved: 29 OCTOBER 2020 Issue N°: -- Revision N°: 08

Signed: For the European Union Aviation Safety Agency