Upload
ravindra-saini
View
8
Download
0
Tags:
Embed Size (px)
DESCRIPTION
The MCB2300 quick start guide
Citation preview
Getting Started and Blinky Example
MCB2300Quick Start Guide
This Quick Start Guide introduces the MCB2300 boards for the LPC2360 and LPC2370 devices from NXP. It shows how to install the ARM software development tools and run a variety of example projects.
To install the evaluation version of the ARM RealView Microcontroller Development Kit (MDK)nInsert the CD-ROM into your PC.
If the opening screen does not appear, run SETUP from the CD root directory
nClick Install Evaluation Software, then ARM Compiler (Eval Tools)
nFollow the setup program instructions
The SETUP program installs Keil mVision and the ARM RealView compilation tools.
Installing the Software
Connecting to your Target
Using ULINK2
Using ULINK-ME
The target is powered via your PC, through its USB port. The Keil ULINK family of adapters connect the USB port of your PC to the JTAG port of your target board allowing you to download and debug embedded programs running on your target hardware.
ULINK2 and ULINK-ME support standard JTAG and Real-Time Agent for on-the-fly target debugging.
The ULINK2 Adapter connects to the MCB2300 using the 20-pin ribbon cable.
The ULINK-ME Adapter connects directly to the MCB2300 20-pin JTAG connector.
Blinky ExampleThis example demonstrates the ease of downloading and debugging an application on a target board.
It can be found at:C:\Keil\ARM\Boards\Keil\MCB2300\Blinky
To use this example
n Start mVision
nOpen the Blinky.uv2 project fileProject - Open
nCompile and link the Blinky applicationProject - Build
nProgram the application into on-chip Flash ROMFlash - Download
nThe LEDs on the target are controlled by the potentiometer setting. As the setting increases, more LEDs are switched on.
n Start debug mode
Using the debugger commands, you may:
n Single step through code
n Set breakpoints
n Run the application
n Review variables in the watch window
n Reset the device to re-run the application
n Use the yellow arrow (program counter) to view the current assembler or C statement
www.keil.com/mcb2300
HTTP with Ethernet
www.keil.com/download/docs/328.asp
http://mcb2300
DO NOT RECOMPILE THIS EXAMPLE WITHOUT AN RL-ARM LICENSE
This example demonstrates easy networking and control of hardware across a TCP/IP network. It configures the LAN network parameters for the evaluation board automatically if a DHCP server is available in your LAN. Otherwise, configure your PC for fixed IP address as detailed in the example.
It can be downloaded from:
To use this example:nStart mVisionnOpen the Http_demo.uv2 project file and download to Flash
Project - OpenFlash - Download
nOpen your web browser and enter the addressnLog in with the following details:
Username adminPassword leave blank
The web pages allow you to control and monitor various functions of the board including LEDs and LCD panel.
Flash File System
www.keil.com/download/docs/338.asp
DO NOT RECOMPILE THIS EXAMPLE WITHOUT AN RL-ARM LICENSE
This example enables you to create, read, copy and delete files from an SD/MMC flash memory card on the evaluation board.
It can be downloaded from:
To use this example:nConnect the MCB2300 board’s COM1 port to the COM1 port
on your PC via a serial cable and start a hyperterminal session configured for 115200 baud, 8 bits, no parity, 1 stop bit, XON/XOFF.
nStart mVisionnInstall an SD/MMC flash memory card and power up the board
nOpen the SD_File.uv2 project file and download to FlashProject - OpenFlash - Download
nThe SD/MMC card can now be read or edited from the Debug window using a HyperTerminal via a serial cable from your PC to the evaluation board.
www.keil.com
RTOS & Real-Time Library Examples
USB - HID DemoThis USB example project implements a Human Interface Device (HID), and connects directly to your PC via the USB. No special USB drivers are required, since the HID support is already built into Windows 2000 and Windows XP.
It can be found at:C:\Keil\ARM\Boards\Keil\MCB2300\USBHID
To use this example:nStart mVisionnOpen the HID.uv2 project file and download to Flash
Project - OpenFlash - Download
nCycle power on the target so that your PC recognizes it as an HID devicenInstall the USB Client application which can be found at:
C:\Keil\ARM\Utilities\HID_client\ReleasenSelect the evaluation board from the drop-down menu
nChecking or unchecking the boxes in the Output (LEDs) group turns the MCB2300 Board’s LEDs on and off.
nInputs (Buttons) show the status of the on-board buttons
Traffic Light example with RTXThis example uses interrupts to control a traffic light system running on the RTX real-time operating system.
It can be found at:C:\Keil\ARM\Boards\Keil\MCB2300\RTX_Traffic
To use this example:nStart mVisionnOpen the RTX_Traffic.uv2 project file
Project - OpennCompile and link the application, then program it into on-chip
Flash ROMProject - Build TargetFlash - Download
nThe LEDs will begin to flash in a controlled mannernThe tasks running in the application may be viewed from the
debugger windowPeripherals - RTX Kernel