Menvier Cat 2009_Bussmann Lo

7/29/2019 Menvier Cat 2009_Bussmann Lo

1/48

Emergency Lighting

Product Catalogue


2/48


3/48Our R&D team are always available to give technical advise with product selection and installation requirements.

1-6 About Emergency Lighting

7-15 Emergency Exits

16-22 Interior Emergency Luminaires

23-26 Emergency Floodlighting

27-36 Interior / Exterior Emergency Luminaires

37-40 Emergency Power Packs & Inverters

Supply Category

The following categories can be used as a guide to

product lead times and also clarifies the position onproduct returns.

Category AFast moving products(normally held in stock)

Category BMade to order products(but readily saleable)

Category CSpecially made to order products or indent items(not returnable for credit)

Descriptions in this publication are only an indication of the type of products offered and shall not form part of any binding contract or be binding on the Company.

Cooper Safety have a policy of continuous improvement and therefore reserve the right to change specifications and descriptions without advance notification.

All goods supplied are subject to Cooper Safetys General Conditions of Sale which are printed at the back of this catalogue.

Luminaires which include control gear are suitable for 240V 50Hz unless specified to the contrary.

When the product is supplied with lamps, it will specify this in the product description.

41-42 Terms and Conditions

Quick Finder Index


4/48

Our R&D team are always available to give technical assistance with product selection and installation requirements

Product Selection Index

Page8

Page9

Page1

0Pag

e11

Page1

2Pag

e13

Page1

4Pag

e15

Page17

Page17

Page18

Page18

Page1

9Pag

e19

Page2

0Pag

e21

Page2

2Pag

e24

Page2

4Pag

e25

Page2

6Pag

e28

Page2

8Pag

e29

Page3

0Pag

e31

Page3

3Pag

e34

Page3

5Pag

e36

Page3

8Pag

e34


5/48

1Our R&D team are always available to give technical assistance with product selection and installation requirements

Mains and emergency lighting designs are constantlybeing developed to meet the ever-changing world thatwe live and work in.

Cooper Safety manufacture a comprehensive rangeof emergency lighting systems as well as conversionunits that convert existing mains luminaires to givethem emergency lighting capabilities

We offer a choice of traditional fluorescent and LEDlight sources in many of our fittings.

Fluorescent fittings offer low initial cost and are idealfor applications where the fitting operates in nonmaintained mode, or is illuminated in maintainedmode only for relatively short periods.

Alternatively, if fittings are regularly illuminated forsignificant periods of time, the use of LED technology

offers massive maintenance benefits, providing up to50,000 hours working life. This compares favourably tothe typical 6,000 hour working life of a fluorescentequivalent.

Emergency Lighting


6/48

2 Our R&D team are always available to give technical assistance with product selection and installation requirements

Emergency Lighting Terminology

The primary objective ofemergency lighting isthe provision of visualconditions that canalleviate panic andfacilitate saferevacuation of abuildings occupantsduring failure of normalpower supply/lighting, in

clear (non-smoke)conditions.

Australian and NewZealand Standards AS (/NZS) 2293.1: 2005 set out the

requirements for the design,installation and operation ofemergency evacuation lighting forbuildings.

However before we go into anydetail on these requirements andtheir implications, it is useful tolook at and understand

emergency lighting definitions.

Emergency LightingLighting provided for use when supply to the normal lightingfails.

Escape Route LightingEmergency lighting provided to ensure that the routes ofescape can be effectively identified and safely used and thatobstructions within the escape route are visible.

Emergency Exit SignExits signs are required by the Building Code of Australia(BCA) to be installed in positions to indicate unambiguouslythe location of, and the direction of travel to the nearest exit,for any part of the building.

Emergency Escape LightingEmergency lighting that provides illumination for the safetyof people leaving an area or attempting to terminate adangerous process before vacating an area.

Stand By LightingEmergency lighting provided to enable normal activities tocontinue substantially unchanged.

Open Area LightingEmergency lighting provided to avoid panic and to provideillumination allowing people to reach a place where anescape route can be identified.

High Risk Area Task LightingEmergency lighting provides illumination for the safety ofpeople involved in a potentially dangerous process orsituation and to enable proper shut down procedures for theoperator and other occupants of the premises.

Single Point Self Contained UnitsThis is a luminaire providing emergency lighting in which thebattery, lamp and control unit are within the luminaires, i.e.self-contained in the unit.

The luminaire will light (or remain lit,depending on type), when the mainssupply fails, usually at a lower light level,compared to the light level with mainssupply on.

Central Battery System & Slave LuminairesThis system is where a Slave luminairedoes not have its own internal powersource & the power source is supplied froma central battery system during a mainssupply failure.

Operation ModesThere are 3 operating modes that form thebasis of all installed emergency lighting systems.

Non Maintained ModeThe non maintained emergency mode is defined as a

luminaire in which all theemergency lamps are in

operation only when the normalmains supply fails, i.e. the lamp/s

are normally off when the mains supply is on, and comes onin emergency mode when the mains supply fails.

Maintained ModeThe maintained emergency mode is defined as a luminaire

in which all the emergencylamps are in operation at allmaterial times, i.e. the lamp/sare on when the mains supply

is on, and remain on in emergency mode when the mainssupply fails.

Sustained ModeThe sustained emergency mode is defined as an emergencyluminaire containing two or more lamps, at least one of

which is energized from a nonmaintained emergency lighting

supply. The remaining lights areenergised and lit from thenormal mains supply.

Usually in sustained mode, onelamp is on when the mains supply is on, and the other lampwill come on when the mains supply fails (i.e., in principleacting as a non maintained emergency lamp).

Emergency Lighting Systems

& Products Protect Life

Mains On Mains Failure




7/48


Central Testing Systems carry out full automatic testing of the entire emergency lighting systemincluding continuous monitoring of parameters such as incoming mains, supply and batterycharger status along with regular automatic functional and discharge testing of luminaires.

Cooper Safety Australia offer a choice of testing systems that are easy to design & install, simpleto understand and use, energy saving & flexible to cater for any future changes.

Our highly skilled lighting engineers are always on hand to assist with system selection & design.

Emergency Lighting Testing Systems


8/48



EasiCheckTMEC2001 EasiCheckTM Computerised emergency lighting testing

systems provide users with essential benefits.

EasiCheck2TM provides all of the sophisticated features required of a leading edge addressable

emergency lighting test system system along with the simple operation and neat installation

demanded by installers and building users.

The panel can be flush or surface mounted and the generously sized metal back box allows

ample facilities for rear or top cable entries.

The large touch screen display provides comprehensive system information and allows access to

all system functions (controlled by multiple level password protection to prevent unauthorised

system alterations).

EasiCheck2TM carries out fully automatic testing of all connected emergency luminaires and control devices according to

the user defined programmed test schedule.

EasiCheck2TM can also carry out manual testing on demand via the relevant menu.

The EasiCheck2TM Panel utilises intelligent soft addressing technology to greatly simplify the installation andcommissioning processes.

Once the system has been installed and the auto learn menu selected, the control panel will automatically scan the dataloop and allocate each device with an address number corresponding with its position on the loop, this avoids thetraditional need for manual addressing of the system devices which is time consuming and provides a potential for error.

A major innovation with the EasiCheck2TM Panel is the ability to incorporate spurs of EasiCheck2TM devices which are fedfrom the loop by utilising a spur isolator.

Whenever the panel detects a spur, it breaks from allocating address numbers to the loop wired devices, allocates addressnumbers to each of the devices on the spur in sequence and then continues to address the devices on the main loop.

Every EasiCheck2TM device incorporates an integral short circuit isolator, ensuring maximum system integrity. A single

short circuit will not disable communication with any loop-mounted devices, the isolators in the devices each side of theshort circuit will operate and the control panel will drive communication from both ends of the loop.

The spur isolator also incorporates a short circuit isolator such that in the event of a short circuit on the spur, theintegrity of the main loop will not be compromised.

System Overview

Simple Future Expansion

The Panel is designed to ensure simplicity of future expansion.

If an additional device is added after the system has been programmed, the Panel will allocate the next availableaddress, it will not alter any of the existing address numbers allocation thus enabling simple updating of as fitted

drawings etc.

Similarly if a device is removed, the relevant address is saved as a spare address for future use, the addresses of theremaining devices are not altered.


9/48



Simple User InterfaceThe main element of the user interface with is a large (120mm x 90mm visible area) touch screen display, which providescomprehensive user information and also acts as a multi functional keypad.

The use of the touch screen display enables a wide range of user and engineering facilities to be incorporated into the panel whilststill offering simple operation.

The Panel touch screen display automatically reconfigures to suit the selected function, for example, if the change device textmenu option is selected, the touch screen is automatically formatted as a full QWERTY keyboard to enable fast and simple textentry.

User Configuration & Maintenance FacilitiesThe Panel has comprehensive facilities for on site system configuration, whereby the user can add or remove devices or change

device text directly via the panel, without the need for a service engineer to visit site.

For initial configuration or major system changes, special PC configuration software is available enabling trained personnel to do

this more efficiently than can be achieved using the system screen.

Existing configurations can be uploaded to the PC so that changes can be made to the existing system rather than having to revert

to initial files.

Networking

Up to One Hundred and Twenty Seven Panels can be networked together to operate as a single networked system. Toachieve this each panel must be fitted with a network card (Optional Extra)

When operating as a networked system all status and fault event information is displayed at every panel, resetting of panelscan also be carried out from any panel on a networked system if panels are suitably configured.

With the simple installation of the Cooper ECO232 Interface on the Network the end user can choose what Softwarepackage that they wish to implement on the system based on budget and utilize all of the monitoring and Controladvantages that the Cooper Software packages such as Site Monitor & Site Graphics have to offer.

Networked panels and ECO232 Interface are connected using a loop topology as illustrated.

RS232

Cooper

Interface

CooperLON

Network

Cooper SiteGraphics

ECO232


10/48



Mixed operation of allswitching modes in onecircuit are possible withoutproblems

Subsequent changes tothe circuit are trouble-free

Automatic light seekfunction

Automatic DLS/TLS seekfunction

Three separate checkbuttons

Three freely assignablefunction button

On-demand assembly status via service button

Plain text display on control unit right to the last light

Single-pole ground AC operation permits furthertrouble-free DC operation

Flexible data memory for all important parameters viaSmart Media Card

Electronic assembly ready to connect on three-tier 4

mm2 neutral line insulated terminal strips

Individual monitoring of up to 20 emergency lights percircuit

CEAG ZBS Systems reliablysupply safety and emergencyluminaires with energy (220VAC/DC), automatically checks theinstallation and monitors, inconjunction with EVGs andmonitoring modules attached tothe system, every single one of

the attached lights through the supply line.

Thanks to new technology, the switching method letsall safety and emergency sign lights (with EVGs andattached monitoring modules) be freely programmedvia the central battery control unit . This means that inone and the same circuit, a mixture of permanentlighting, switched lighting and stand-by lighting ispossible without any extra data control lines!

Advantages at a Glance

The CEAG ZBS system was chosento be installed in the recentrefurbishment of the historic SydneyTown Hall.

The unique architecture, heritagerestraints, variety of events held andvolume of people attendingpresented the project engineers witha multitude of challenges.

ZBSCentral Battery Systems


11/48


Exits signs are required by the Building

Code of Australia (BCA) to be installedin positions to indicate unambiguouslythe location of, and the direction of travelto the nearest exit, for any part of thebuilding.

Exit signs are required to be mountedbetween 2 and 2.5 metres above floorlevel, or immediately above doors whichare above 2.5 meters high. They must,however, be mounted in normal field ofview.

The 2006 edition of the BCA specifiesthe new AS 2293.1 2005. This newEmergency Lighting Standard specifiesthe running person pictogram. The newBCA took effect on 1st May 2006.

Transitional provisions for theimplementation of the new provisions ofthe BCA are managed by eachAustralian State through StateRegulations.

We offer a range of exits from standardfluorescent to LED to LED IP rated exits.

With a choice of EXIT or pictogramdiffusers available for most CooperSafety emergency exits, we have an exitto suit most applications.

Interior Emergency Exits


12/48



Kwiklite Exit Series - Complete Fitting Code 1E

Spare Diffusers - Running Man Pictograph

Accessories

222mm

82mm372mm

Part no. Description Stock Status

Dimensional Data

Maintained or non maintained One box solution Single or double sided applications Wall or ceiling mount applications Available in standard 10 watt fluorescent or 3 watt LED c/w 3 x directional pictograph diffusers & backing plate White, flame retardant ABS housing Polycarbonate diffusers High temperature nickel cadmium batteries 24m viewing distance

Easicheck compatible CEAG Central Battery Systems compatible

WG-KWIK-CEILING Wire guard - ceiling mount applications only B

WG-KWIK-WALL Wire guard - wall mount applications only B

KLM-MK2 1 x 10W maintained exit, complete unit A

KLS-MK2 2 x 10W sustained exit, complete unit B

KLM-LED-P 3W LED maintained exit, complete unit A

HDIFF-KLMRC Spare diffuser straight ahead A

HDIFF-KLMRL Spare diffuser directional arrow left A

HDIFF-KLMRR Spare diffuser directional arrow right A

KL-O Opal diffuser B


13/48


Kwiklite Exit Series - Complete Fitting Code 1E

Spare Diffusers - Running Man Pictograph

Accessories

222mm

82mm372mm


Dimensional Data

Maintained or non maintained One box solution Single or double sided applications Wall or ceiling mount applications Available in standard 10 watt fluorescent or 3 watt LED c/w 2 x directional EXIT diffusers & backing plate White, flame retardant ABS housing Polycarbonate diffusers High temperature nickel cadmium batteries 24m viewing distance


WG-KWIK-CEILING Wire guard - ceiling mount applications only B

WG-KWIK-WALL Wire guard - wall mount applications only B

KLMAU 1 x 10W maintained exit, complete unit A

KLS 2 x 10W sustained exit, complete unit B

KLM-LED 3W LED maintained exit, complete unit A

KL-E Spare EXIT diffuser c/w peel off arrows A

KL-O Opal diffuser A



14/48



Maintained or non maintained Recessed housing Ideal for use in modern and prestigious applications Solid and suspended ceiling applications Available in standard 10 watt fluorescent or 3 watt LED White, polyester powder coated housing & ceiling plate Choice of EXIT or pictograph legends High temperature nickel cadmium batteries 24m viewing distance Easicheck compatible CEAG Central Battery Systems compatible

RELM-MK21 x 10W maintained / non maintained exit -body only c/w 3 core flex & plug

B

RELM-LED3W LED maintained / non maintained exit -body only c/w 3 core flex & plug

B

EL-GSC Single sided diffuser straight ahead B

EL-GSL Single sided diffuser directional arrows left B

EL-GSR Single sided diffuser directional arrows right B

EL-GDRL Double sided diffuser directional arrows one way B

Gloline Diffuser Range - Pictograph Legend

Gloline Diffuser Range - EXIT Word Legend

EL-J Single sided diffuser, no arrows B

EL-K Single sided diffuser, arrow left B

EL-L Single sided diffuser, arrow right B

EL-M Single sided diffuser, double arrow B

EL-N Double sided diffuser, no arrows B

EL-O Double sided diffuser, single arrow B

EL-P Double sided diffuser, double arrows B

Gloline Exit Series - Body & Diffusers Sold Individually Code 1E



15/48


Emergency Exits - Interior

Safe Edge Recessed Exit Series - Body & Diffusers Sold Individually Code 1E

RESMAU1 x 8W maintained / non maintained exit -white body only c/w 3 core flex & plug

A

RESMAU-LED3W LED maintained / non maintained exit -white body only c/w 3 core flex & plug

A

SEDCLROne box solution blade assemblyc/w all directional pictograph decals

A

Safe Edge Diffuser Range - Pictograph Legend

Safe Edge Diffuser Range - Running Man Legend - Theatre

SED-THLR Theatre double sided diffuser directional arrows one way C

SED-THC Theatre single sided diffuser straight ahead C

407mm150m

m

85mm

145mm

Cut out 350mm x 115mm


Dimensional Data

Maintained or non maintained Recessed housing Solid or suspended ceiling applications Unique, stylish European design Ideal for modern prestigious applications Available in standard 8 watt fluorescent or 3 watt LED White, flame retardant ABS housing c/w flex and plug High temperature nickel cadmium batteries 16m viewing distance




16/48



358mm130m

m

77mm

162mm

SEDAU 1 x 8W maintained / non maintained exit - white body only A

SEDAU-LED 3W LED maintained / non maintained exit - white body only A

SEDCLR One box solution blade assembly c/w all directional pictograph decals A

Safe Edge Diffuser Range - Pictograph Legend

Safe Edge Diffuser Range - Running Man Legend - Theatre

SED-THLR Theatre double sided diffuser directional arrows one way C

SED-THC Theatre single sided diffuser straight ahead C

Dimensional Data

Safe Edge Recessed Exit Series - Body & Diffusers Sold Individually Code 1E


Maintained or non maintained Surface mount Ideal for use with sloping ceilings Unique, stylish European design Ideal for modern prestigious applications Available in standard 8 watt fluorescent or 3 watt LED 900 pivoting legend White, flame retardant ABS housing High temperature nickel cadmium batteries 16m viewing distance



17/48


Emergency Exits - Interior / Exterior

Jumbo Exit Sign Code 1E

LEX-C Single sided diffuser straight ahead B

LEX-L Single sided diffuser directional arrows left BLEX-R Single sided diffuser directional arrows right B

Jumbo Diffuser Range - Pictograph Legend

LEX-218S 2 x 18W sustained emergency luminaire, body only A

LEX-E Single sided diffuser, no arrows c/w peel off arrows B

Jumbo Diffuser Range - EXIT Word Legend (Exit legend suitable for use in New Zealand market only)


Dimensional Data

Sustained Wall or ceiling mount Single or double sided Large format, ideal for use in open areas 2 x 18 watt fluorescent White, steel polyester coated housing Downward light window High temperature nickel cadmium batteries 32m viewing distance Easicheck compatible CEAG Central Battery Systems compatible


645m

m

293mm

103mm


18/48


Interior / Exterior Emergency Exits

Weatherlite Exit Series - Body & Exit Diffusers Sold Individually Code 1E

WL-EC Single sided diffuser straight ahead B

WL-EL Single sided diffuser directional arrows left B

WL-ER Single sided diffuser directional arrows right B

Weatherlite Diffuser Range - Pictograph Legend

WLMAU 1 x 8W maintained or non maintained emergency c/w opal diffuser A

WL-EXC Single sided diffuser, no arrows C

WL-EXL Single sided diffuser, arrow left C

WL-EXR Single sided diffuser, arrow right C

Weatherlite Diffuser Range - EXIT Word Legend (Exit legend suitable for use in New Zealand market only)

125m

m

365mm

95mm

WL-O Opal diffuser A

Weatherlite Diffuser Range - Opal


Dimensional Data

Maintained or non maintained Weatherproof IP65 Wall mount Vandal resistant Internal and external applications 1 x 8 watt fluorescent Polycarbonate body and diffuser Choice of EXIT or pictograph diffusers High temperature nickel cadmium batteries 16m viewing distance



19/48


UX-EC Single sided legend straight ahead B

UX-EL Single sided legend directional arrows left B

UX-ER Single sided legend directional arrows right B

Ultimate Exit - Legend Diffuser

Ultimate Exit - EXIT Legend Diffuser (Exit legend suitable for use in New Zealand market only)

UXM-LED 3W LED maintained unit c/w two clear high impact polycarbonate diffusers B


Dimensional Data

Maintained or non maintained Weatherproof IP66 Pendant, wall or ceiling mount Single or double sided Cool room version available Food processing or wash down applications Diecast aluminium housing Powder coat finish High temperature nickel cadmium batteries 24m viewing distance


Interior / Exterior Emergency Exits

Ultimate Exit LED IP66 Heavy Duty, Vandal Resistant - Body & Diffusers Sold Individually

UX-EXL Single sided diffuser, arrow left B

UX-EXR Single sided diffuser, arrow right B


20/48


The market leading Menvier UFO seriesare unobtrusive non maintainedemergency luminaires designed for use inescape lighting applications.

The very high light output tungstenhalogen lamp ensures safe evacuation atall times in the event of power failure.

The UFO series is available in bothrecessed an surface mount making theUFO first choice regardless of mounting

application.Unique to the UFO is the lamp filamentfailure indicator.The red LED has a dual function - itindicates that the emergency supply batteryis being charged and also indicates thatcircuit continuity exists through the filamentgoes open circuit, the LED will turn offalerting maintenance personal to replacethe lamp.

The use of temperature nickel cadmiumbatteries ensures long service life.

Interior Emergency Luminaires


21/48


UFO-SP - Recessed Mount Emergency Code 1E

Dimensional Data

UFO-SP 6V, 10W non maintained, recessed, split pack A

QIRFV spinning assembly lamp and clear plastic visor B


Non Maintained Recessed mount Split pack for ease of installation c/w 3 core flex and plug c/w 120mm spinning assembly 100mm cut out size High temperature nickel cadmium batteries Easicheck compatible CEAG Central Battery Systems compatible

UFO-SM-MK2- Surface Mount Emergency Code 1E

UFO-SM-MK2 6V, 10W non maintained, surface mount A

QIRFV spinning assembly lamp and clear plastic visor C


Non Maintained

Surface mount High temperature nickel cadmium batteries Easicheck compatible CEAG Central Battery Systems compatible


UFO-SP

202m

m

65mm

34mm

52mm

52mm

157mm

121.3mm

235m

m235mm

58mm

UFO-SM-MK2


22/48


21mm

44mm

Dimensional Data

Recessed

36mm

107m

m

198mm

BWRM Briteway recessed LED maintained / non maintained luminaire C


Briteway Recessed LED Code 1E

2 x 1W LED technology Discreet flush mount Compact emergency lighting Easy to install Low maintenance solution Ideal for night light or background illumination

applications

Adjustable light level Green status LED - simplifies maintained checks

BWM Briteway surface mount LED maintained / non maintained luminaire C


Briteway Surface Mount LED

2 x 1W LED technology Surface mount applications Compact emergency lighting

Easy to install Low maintenance solution Ideal for night light or background illumination

applications

Adjustable light level Green status LED - simplifies maintenance checks

Surface Mount



23/48


MPM Micropoint recessed LED maintained / non maintained luminaire C

52mm

40mm

2mm


Micropoint LED Code 1E

60,000 hour life 3W LED Minimal visual presence - 40mm Flush mount Battery and control gear housed in remote pod with plug

in connector for mains supply

Green status LED simplifies maintenance checks Spring clip fixing arrangement Optional adaptor plate Easicheck compatible

SN8-3-NMM 1 x 8W maintained or non maintained emergency luminaire A


Sintralite Super Slim Emergency Luminaire Code 1E

Maintained or non maintained Attractive flush mount design Dual mode operation (maintained or non maintained)

Simple installation - spring clip system Fire retardant polycarbonate construction Snap in diffuser and gear tray assembly High temperature nickel cadmium batteries Easicheck compatible CEAG Central Battery Systems compatible

Dimensional Data

SN8-3-NMMMPM



24/48


BLMAU

Dimensional Data

VSMAU

VSMAU 1 x 8W maintained or non maintained emergency luminaire A


Vistral Super Slim Emergency Luminaire Code 1E

Maintained or non maintained Attractive curved low profile design Wall or ceiling mount Easy to install 50mm depth Clear fresnel lens High temperature nickel cadmium batteries Easicheck compatible CEAG Central Battery Systems compatible

BLMAU 1 x 8W maintained or non maintained emergency luminaire A


Britelite Plus Emergency Luminaire Code 1E

Maintained or non maintained High light output Clean, attractive styling

Designed for ease of installation First fix base plate Combined clip in gear tray and diffuser assembly High temperature nickel cadmium batteries Easicheck compatible CEAG Central Battery Systems compatible



25/48


Cerclar Decorative Emergency Luminaire

CEW4022Z22 + 40W, T5 circular high frequency -c/w opal polycarbonate diffuser - mains only, white

C

CES4022Z22 + 40W, T5 circular high frequency -c/w opal polycarbonate diffuser - mains only - silver

C

Emergency or mains only Wall or ceiling mount Attractive architectural profile White or metallic silver finish 22 + 40W, T5 circular High frequency Choice of white or silver body colour

EBCEW4022ZAU22 + 40W, T5 circular high frequency -c/w opal polycarbonate diffuser - emergency, white

C

EBCES4022ZAU22 + 40W, T5 circular high frequency -c/w opal polycarbonate diffuser - emergency, silver

C


11

1mmd

epth

Dimensional Data

480mm dia


Code 1E


26/48


T8 Linear Fluorescent Emergency Battens Code 1E

Dimensional Data

LPB118EMEL 1 x 18W Maintained Bare Batten (less tubes) B

LPB136EMNM 1 x 36W Non Maintained Bare Batten (less tubes) B



Part No Description Stock Status

Accessories - Prismatic Diffuser Kits Code 1E

DP218 Prismatic diffuser Kit to suit LPB118EMEL & LPB218EMEL A

DP136 Prismatic diffuser Kit to suit LPB136EMNM & LPB136EMEL A

DP236 Prismatic diffuser diffuser Kit to suit LPB236EMEL A

Accessories - Wire Guard Kits Code 1E

WG136 Wire Guard Kit to suit LPB136EMNM & LPB136EMEL A

WG218 Wire Guard Kit to suit LPB118EMEL & LPB218EMEL A

WG236 Wire Guard Kit to suit LPB236EMEL A

36w

68

88 18w or 36w

18w or 36w36w

120

108

Lamp L W D

(mm) (mm) (mm)

1 x 18W bare 610 120 882 x 18W bare 610 120 88

1 x 36W bare 1225 70 1012 x 36W bare 1225 120 101

1 x 18W c/w diffuser or wire guard 615 126 108

2 x 18W c/w diffuser or wire guard 615 126 108

1 x 36W c/w diffuser or wire guard 1270 100 1102 x 36W c/w diffuser or wire guard 1270 160 110


Wide body project batten Maintained & non maintained Multi purpose - wall, ceiling, chain or conduit mount Ideal for high rise & car parks Ideal when extra width is required

to cover junction boxes

Electronic ballast technology High temperature nickel cadmium batteries Easicheck compatible CEAG Central Battery Systems compatible


27/48


Emergency Floodlighting

Cooper Safety offer a range of versatile, high light outputnon-maintained emergency flood lights units.

Attractively styled yet robust, our flood lights are designed forhigh ceilings with large open areas such as shopping malls,airports, public auditoriums, sport halls, warehouses factoriesand commercial premises.

Fully adjustable spotlight heads on all of our flood lightsprovide flexibility in multi-directional beam settings and tiltingto minimise glare.

The beam heads on our BEN3AU and Metrolite ranges canbe remotely mounted for installations in difficult areas withoutthe need to remove the fitting from the ceiling.

Our UEL212TDM offers time delay switches allowing the

emergency beam lights to stay on battery supply for up to 15minutes while HID lamps come up to full light output. This isparticularly useful in premises where high bay luminaires areused.


28/48


Interior Emergency Floodlighting

Dimensional Data

ZCC4

Metrolite

ZCC4 2 x 9W non maintained flood A


ZCC4 Emergency Flood Light - 2 x 9W Code 1E

2 x 9W non maintained Wall or ceiling mount Contemporary Fully adjustable high impact polycarbonate lamp heads Injection moulded colour stable, high impact

polycarbonate housing and mounting plate

Multi directional lamp heads Fitted with flex & plug for ease of connection Sealed lead acid battery

MT12102123 2 x 12W non maintained flood C


Metrolite Emergency Flood Light - 2 x 12W

2 x 12W non maintained Wall or ceiling mount

Modern, stylish appearance BESA and cable entry on rear Easy to install with first fix back plate Zinc plated steel base plate / gear tray Body and lamp heads flame retardant ABS Sealed lead acid battery


29/48


Interior Emergency Floodlighting

BEN1AU Emergency Floodlights - 2 x 55W - 1 hour duration (suitable for use in New Zealand market only) Code 1E

BEN3AU

(standard)

325mm

370mm

82mm

BEN1AU

325mm

370mm

82mm

BEN3AU 2 x 21W non maintained flood A


BEN3AU Emergency Floodlights - 2 x 21W Code 1E

2 x 21W non maintained Wall mount Robust construction Multi directional lamp heads Sealed lead acid battery Easicheck compatible

BEN1AU 2 x 55W, 1 hour non maintained flood C


2 x 55W non maintained

Wall mount

Robust construction Multi directional lamp heads Sealed lead acid battery Easicheck compatible

Dimensional Data


30/48


UEL212TDM 2 x 12W non maintained flood c/w time delay monitor A

Interior / Exterior Emergency Floodlighting

UEL2121TDM Emergency Floodlights - 2 x 12W - Cool Room (-300C) Code 1E


2 x 12W non maintained Wall mount IP66 weatherproof Designed for severe environments -300C to +500C ambient environments Maximum performance against rain, moisture, cold,

corrosion and dust

High temperature nickel cadmium batteries

Dimensional Data


31/48


Interior / Exterior Emergency Luminaires

Designing emergency lighting for areas with high ceilingsposes problems. Conventional bulkheads lack sufficient lightoutput and often have inappropriate photometric distribution,and twin spot projectors are unlikely to provide the 0.2 Luxminimum coverage over the entire core area for open areasas required for compliance with standards.

With high output 4 cell control gear, and a purpose designedreflector, Alfalux high bay provides a compact, simple toinstall, solution suitable for mounting heights up to 10 Metres,with features such as a hinged gear tray and push in wireterminals for the mains supply, maintenance issues have not

been overlooked either, an extra high output green LED isprovided for mains/charge healthy indication which can easilybe seen from ground level, even with high ambient lightinglevels and high mounting heights.

AlfaluxHighbay


32/48


400mm

95mm

HL8NAU 1 x 8W non maintained emergency c/w clear polycarbonate diffuser C


Alfalux Highbay, IP65, Vandal Resistant Code 1E

Non maintained High performance solution for mounting heights of 6-10m Energy efficient White powder coated diecast aluminium base Clear polycarbonate diffuser Ideal for low level background lighting,

night lighting & security

High temperature nickel cadmium batteries Easicheck compatible CEAG Central Battery Systems compatible

125m

m

365mm

95mm

Dimensional Data

WLMAU 1 x 8W maintained or non maintained emergency c/w opal diffuser A


Weatherlite Weatherproof Wall Mount Series Code 1E

Maintained or non maintained Weatherproof IP65 Wall or ceiling mount

Vandal resistant 1 x 8W fluorescent Polycarbonate body and diffuser High temperature nickel cadmium batteries Easicheck compatible CEAG Central Battery Systems compatible

WLMAUHL8NAU

136m

m



33/48



NSSE2153 1 x 8W, non maintained, wall or ceiling mount A


NSSE2153 IP65 Non Maintained Surface Mt Emergency Luminaire Code 1E

Non maintained IP65 1 x 8W fluorescent Wall or ceiling mount Shallow, unobtrusive profile White, flame retardant ABS base Clear, polycarbonate diffuser High temperature nickel cadmium batteries

AG Vandal Resistant Emergency Luminaire (ICEL Approved) Code 1E

AG8-3M-ICEL 1 x 8W emergency C

AG1111 11W mains only C

Emergency or mains only IP65 Vandal resistant diffuser

1 x 8W fluorescent (emergency), 11W PL lamp (mains only) Wall or ceiling mount White, powder coated diecast aluminium base Polycarbonate diffuser High temperature nickel cadmium batteries Easicheck compatible CEAG Central Battery Systems compatible

AG

110m

m

390mm

90mm

Dimensional Data


34/48



WWM2 1 x 8W maintained or non maintained, wall mount B


Weatherway IP65 Vandal Resistant Bulk Head Unit

Maintained or non maintained Weatherproof IP65 Wall or ceiling mount 1 x 8W fluorescent Aluminium, powder coated base Polycarbonate diffuser High temperature nickel cadmium batteries Easicheck compatible CEAG Central Battery Systems compatible

Code 1E


35/48




DRG Vandal Resistant Emergency Luminaire Code 1E

Maintained, non maintained or mains only IP65 Dust tight and water proof 1 x 28W 2D lamp Wall or ceiling mount Optional grille and patress kit for flush mounting

over conduit

Tamper resistant security screws High temperature nickel cadmium batteries Easicheck compatible

CEAG Central Battery Systems compatible

DRG28M 1 x 28W maintained emergency B

DRG28NM 1 x 28W non maintained emergency B

DRG28AC 1 x 28W mains only B

Dimensional Data

Accessories

DRGACCKIT Grille and pattress kit B

334mm

150mm


36/48


The Vienza range brings a touch of style to both

interior and exterior applications where a tough, water

proof, energy efficient light source is required.

Designed to offer a variety of finished appearances,the Vienza blends effortlessly into a multitude of

environments with the help of its smooth seamless

profile.

Both emergency and mains only versions encompass

vandal resistant polycarbonate construction whilst

offering a choice of opal or clear prismatic diffusers

incorporating internal prisms, providing a smooth, wipe

clean exterior.

Mounting skirt and eyelid attachments for the round

version, together with photocell kits complete the range,

making Vienza a truly versatile lighting solution.


Vienza

Vienza c/w eyelidand mounting skirt

Vienzac/w Prismatic diffuser

available upon requestplease consult factory


37/48



Vienza 2D Decorative Oval Emergency Luminaire Code 1E


EBVRWO28AU 1 x 28W maintained c/w white housing, opal diffuser B

EBVRBO28AU 1 x 28W maintained c/w black housing, opal diffuser B

VRWO28AU 1 x 28W mains only c/w white housing, opal diffuser B

VRBO28AU 1 x 28W mains only c/w black housing, opal diffuser B

FXC259 Round prismatic diffuser B

VRWE Round white eyelid B

VRBE Round black eyelid B

VRWS Round white skirt B

VRBS Round black skirt B

VPC Photocell kit B

Accessories

Dimensional Data

Skirt

Vienza Construction

Emergency maintained, non maintained or mains only IP65 Dual mode operation (maintained or non maintained) 1 x 28W, 2D lamp Wall or ceiling mount Vandal resistant polycarbonate Opal or clear prismatic diffusers Black or white body colour Optional mounting skirts Optional eyelids



38/48



Emergency maintained, non maintained or mains only IP65 Dual mode operation (maintained or non maintained) 1 x 28W, 2D lamp Wall or ceiling mount Vandal resistant polycarbonate Opal diffusers Black or white body colour Optional photocell kit Versatile lighting solution


Vienza 2D Decorative Square Emergency Luminaire Code 1E


Accessories

Dimensional Data

EBVSWO28AU 1 x 28W maintained c/w white housing, opal diffuser B

EBVSBO28AU 1 x 28W maintained c/w black housing, opal diffuser B

VSWO28AU 1 x 28W mains only c/w white housing, opal diffuser B

VSBO28AU 1 x 28W mains only c/w black housing, opal diffuser B

FXC261 Square prismatic diffuser B

VPC Photocell kit B

310mm

310mm


39/48



Mains and emergency versions available IP65 Energy efficient 1 x 28W, 2D lamp Polycarbonate housing and diffuser Opal diffuser White body Hinged gear tray for ease of installation High temperature nickel cadmium batteries


Patriot Code 1E

Dimensional Data

254mm

254mm

95mm


PASWO28Z 1 x 28W mains only c/w white housing, opal diffuser c/w lamp C

EBPASWO28AU 1 x 28W maintained c/w white housing, opal diffuser c/w lamp C


40/48

IP65 weatherproof Maintained & non maintained Vandal & heat resistant Fire retardant polycarbonate UV stabilised body Polycarbonate diffuser Electronic ballast technology High temperature nickel cadmium batteries Easicheck compatible CEAG Central Battery Systems compatible



Weatherproof T5 Linear Fluorescent Luminaires Code 1E

TFW128Z 1 x 28W mains only C 2.4




TFW149Z 1 x 49W mains only C

TFW249Z 2 x 49W mains only C

SWP118EMEL 1 x 18W maintained C




Accessories

TFWST12Stainless steel clip kitfor 1200mm, 28W

C

TFWST15Stainless steel clip kitfor 1500mm, 35W, 49W

C

Part no. Description Stock Wt

Weatherproof T8 Linear Fluorescent Emergency Luminaires

IP65 weatherproof

Maintained & non maintained

Vandal & heat resistant Fire retardant polycarbonate UV stabilised body Polycarbonate diffuser Electronic ballast technology High temperature nickel cadmium batteries Easicheck compatible CEAG Central Battery Systems compatible

Lamp L W D Fixing

(mm) (mm) (mm) Centres1 x 28W 1270 100 101 9182 x 28W 1270 160 101 918

1 x 35W 1570 100 101 12202 x 35W 1570 160 101 1220

1 x 49W 1570 160 101 12202 x 49W 1570 160 101 1220

EBTFW228ZAU 2 x 28W emergency C 3.4




EBTFW249ZAU 2 x 49W emergency C

Part no. Description Stock Wt

Part no. Description Stock


41/48


Emergency Power Packs & Inverters

The latest range of Convertalite conversion kits deliver optimum performance for a diverse

choice of fluorescent lamp types and wattages.

The new Z*QX series of modules simplifies the kit selection for T5 & T8 lamps, the same module

being suitable for high frequency circuits. Each module now has 4 pole output switching plus an

additional relay pole to isolate the switched live in emergency mode. Consequently, lock out of

the ballast is prevented when it returns to mains mode.

Low profile modules combined with unique chamfered batteries and end caps, ease integration

into shallow luminaires.

All Convertalite kits can be modified to operate with the advanced EasicheckTM self test system.


42/48


Emergency Power Packs & Inverters

Converts fluorescent fittings into emergency luminaires Compatible with high frequency circuits Covers a diverse choice of lamps (above) Delayed start 5 pole relay prevents mains ballast lockout Offers fast and easy conversion High temperature nickel cadmium batteries Easicheck compatible

Conversion Kits to Suit 14, 21, 28, 35, 49 & 54W T5 & Compact Fluorescent Lamps Code 1E


ZHC1-KIT 14-21W T5 inverter & 4 cell (stick) battery pack B

ZHD2-KIT 28-35W T5 inverter & 5 cell (stick) battery pack A

ZHE1-KIT 49-54W T5 inverter & 6 cell (stick) battery pack B

ZHD1-KIT 26-42W PLT inverter & 4 cell (stick) battery pack A

Converts fluorescent fittings into emergency luminaires Compatible with electronic ballasts Covers a diverse choice of lamps (above) 5 pole relay Offers fast and easy conversion High temperature nickel cadmium batteries Easicheck compatible

Conversion Kits to Suit 18, 36 & 58W T8 Fluorescent Lamps Code 1E


ZBQX2H 18W inverter module only (3 cell) A

ZCQX2H 18W, 36W & 58W inverter module only (4 cell) A

ZBXQ-KIT 18W inverter & 3 cell (stick) battery pack A

ZCQX-KIT 18W & 36W inverter & 4 cell (stick) battery pack A

ZCQX-KIT 58W inverter & 4 cell (stick) battery pack A

ZCQX-KIT22 36W inverter & battery pack (2 side by side) A

ZCQX-KIT22 58W inverter & battery pack (2 side by side) A


43/48


Emergency Inverters

Monitors local unswitched mains supply Unobtrusive emergency lighting Simple single luminaire conversion New 24, 50 and 110V AC/DC inverters 110V inverters fully compatible with both electro-magnetic & electronic ballasts Inverters will drive lamps ranging from 8W to 58W Easicheck compatible CEAG Central Battery Systems compatible

Inverters Code 1E


SMCB110HF 8-58W, 110V AC/DC Inverter (Monitors Local Unswitched Mains Supply) A

SMCB50 8-58W, 48-50V AC/DC Inverter (Monitors Local Unswitched Mains Supply) B

SMCB24 8-58W, 24V AC/DC Inverter (Monitors Local Unswitched Mains Supply) B

Inverters to Suit 8-10W lamps & Kwiklite LED Code 1E


EP601P 10W, 2 cell, 2 hour inverter PCA B

EP605A 3W LED driver and PCB assembly B

EP606 6 x 0.5W LED light strip B


44/48


Battery Packs

BAT2SLC High Temp Ni-Cad Batteries 2 Cell, 2.4V End on End Stick Pack B

BAT2FLHigh Temp Ni-Cad Batteries 2 Cell, 2.4V Side By Side Parallel PackSuits Menvier RELM Series

B

BAT2SP3High Temp Ni-Cad Batteries 2 Cell, 2.4V Stick PackSuits Menvier KLM Series

B

BAT2SP6 High Temp Ni-Cad Batteries 2 Cell, 2.4V Stick Pack c/w Spade Connector B

BAT2SP8 High Temp Ni-Cad Batteries 2 Cell, 2.4V Stick Pack c/w Spade Connector B

BAT3SLC High Temp Ni-Cad Batteries 3 Cell, 3.6V End on End Stick PackSuits Menvier ZBQX2H Inverters

B

BAT3FL High Temp Ni-Cad Batteries 3 Cell, 3.6V Side By Side Parallel Pack B

BAT4SLCHigh Temp Ni-Cad Batteries 4 Cell, 4.8V End on End Stick PackSuits Menvier ZCQX2H Inverters

B

BAT4SLC2High Temp Ni-Cad Batteries 4 Cell, 4.8V 2 x 2 Split PackSuits Menvier ZCQX2H Inverters

B

BAT4FL High Temp Ni-Cad Batteries 4 Cell, 4.8V Side By Side Parallel Pack B

BAT4FLTHigh Temp Ni-Cad Batteries 4 Cell, 4.8V Side By Side Parallel Packc/w Mounting Plate

B

BAT4SLSC High Temp Ni-Cad Batteries Sub "C" 4 Cell, 4.8V End on End Stick Pack B

BAT5FLTHigh Temp Ni-Cad Batteries 5 Cell, 6.0V Side By Side Parallel Packc/w Mounting Plate Suits Menvier UFO-SM

B

BAT5SLC High Temp Ni-Cad Batteries 5 Cell, 6.0V End on End Stick Pack B

BAT5SLC2 High Temp Ni-Cad Batteries 5 Cell, 6.0V 3 cell & 2 cell Split Pack B

BAT5SP10High Temp Ni-Cad Batteries 5 Cell, 6.0V Side By Side Parallel Packc/w Mounting Plate Suits Menvier UFO-SM-MK2

B

BAT5SP14HHigh Temp Ni-Cad Batteries 5 Cell, 6V Side By Side Parallel Packc/w Mounting Plate Suits Menvier UFO-SP & UFO-SM-MK2

B

BAT5SP18High Temp Ni-Cad Batteries 5 Cell, 6V Stick Pack, Minus End Caps

c/w Spade Connectors

B

BAT6SLC2High Temp Ni-Cad Batteries 6 Cell, 7.2V 2 x 3 cell Split PackSuits Menvier ZHE1 Inverter

B

BAT6SLC High Temp Ni-Cad Batteries 6 Cell, 7.2 End on End Stick Pack B

BAT12SLA7 12 volt 7.2 A/Hr seal lead acid battery to suit BEN3AU B

Replacement Battery Packs Code 1E



45/48


Terms and Conditions of Sale

1. General

1.1 In these Conditions of Sale (the Conditions) the Company means Cooper Safety, the Goodsmean any item of whatsoever nature which is to be sold or supplied by the Company includingservices; and the Purchaser means the person, association, firm or body corporate (collectivelyperson) which receives a quotation from the Company for, or buys or has agreed to buy, Goods.

1.2 All quotations are made and all orders are accepted subject to the following terms and

conditions and no addition thereto or variation therein shall be made unless agreed in writing bythe parties.

1.3 These Conditions shall apply to and form part of every contract of sale entered into by theCompany (a Contract). All orders are accepted and executed on the understanding that thePurchaser is bound by these Conditions. Where there is any inconsistency between theseConditions and any conditions that the Purchaser seeks to impose, these Conditions shallprevail. These Conditions, together with any special terms and conditions agreed in writing bythe parties, and any documents referred to in the Conditions or elsewhere in the Contract, shallconstitute the entire agreement between the Company and the Purchaser and supersede anyprevious agreement or arrangement between them relating to the subject matter thereof. ThisContract may not be amended or varied except in writing duly executed by the parties.

1.4 A Contract shall be formed when acceptance of the Purchasers order is confirmed in writingby the Company or by (and to the extent of) the Companys commencement of performance.

1.5 No person other than a party to a Contract shall be entitled to enforce any term of it (savefor a person to whom any rights and/or obligations contained in the Contract are assigned ornovated by written agreement to the extent of any such rights).

2. Quotations and Orders

2.1 The Company reserves the right to refuse the acceptance of a quotation unless suchquotation is stated to be open for a specific period and is not withdrawn within such period.

2.2 A quotation by the Company does not constitute an offer and the Company may withdraw or

revise any quotation at any time prior to the Companys acceptance of the Purchasers order.The Companys quotation to supply Goods is valid for 30 days from the date submitted to thePurchaser, unless withdrawn prior to receipt of the Purchasers acceptance or extended by theCompany in writing. To the extent a quotation relies on third party information and the Companylater determines a material alteration may be needed in the Goods specification or method ofmanufacture, the Company may amend or withdraw the quotation as it sees fit, regardless ofthe Purchasers prior acceptance thereof.

2.3 Orders may be accepted in whole or in part, unless previously agreed in writing to thecontrary. Shipment of less than an entire order shall be deemed acceptance of only the portionshipped. Written or oral acknowledgement of an order does not constitute acceptance of the un-shipped portion of the order.

2.4 No order accepted by the Company may be cancelled or varied by the Purchaser exceptwith the Companys agreement in writing on terms including (without limitation) indemnificationof the Company against any cost, loss or damage suffered or incurred as a result of suchcancellation or variation.

3. Prices

3.1 The price payable for Goods shall, unless otherwise stated by the Company in writing, bethe list price of the Company current at the date of despatch, and in the case of an order fordelivery by instalments the price payable for each instalment shall be the list price of theCompany current at the date of despatch of such instalment. Subject thereto, ALL PRICES

AND TERMS ARE SUBJECT TO CHANGE WITHOUT NOTICE.3.2 The Purchaser shall indemnify and hold harmless the Company in respect of any loss, costor expense incurred by the Company as a result, directly or indirectly, of the Purchasersinstructions or lack of instructions or through any failure or delay whatsoever in taking deliveryor through any other act, neglect or fault on the part of the Purchaser, its servants, agents oremployees. The price of the Goods shall be due in full to the Company in accordance with theterms of the Contract and the Purchaser shall not be entitled to exercise any set-off, lien or anyother similar right or claim.

3.3 All prices are subject to the addition of Value Added Tax and all other applicable taxes andduties at the appropriate rate.

4. Descriptive Matter and Illustrations

4.1 All descriptive and forwarding specifications, drawings and particulars of weights anddimensions issued by the Company are approximated only and are intended only to present ageneral idea of the Goods to which they refer and shall not form part of the Contract.

4.2 Any data, technical information or performance figures provided by the Company are basedon tests performed under standard conditions and cannot be guaranteed under differentconditions.

4.3 The Company may make any changes in the specification of Goods as required to conformwith any applicable safety or other statutory requirements and/or which do not materially affecttheir quality or performance.

5. Despatch Times

5.1 Any times quoted for despatch are to be treated as estimates only and the Company shallnot be liable for failure to despatch within such time unless the Purchaser has suffered lossthereby and the amount payable in respect thereof shall have been agreed in writing prior todespatch as liquidated damages, in which case the Companys liability shall be limited to theamount so agreed to be paid. In all cases, whether a time for despatch be quoted or not, thetimes for despatch shall be extended by a reasonable period if delay if despatch is caused byinstructions or lack of instructions from the Purchaser, or by industrial dispute, or by any causewhatsoever beyond the Companys reasonable control.

6. Storage

6.1 If by reasons of instructions or lack of instructions from the Purchaser despatch inaccordance with the Contract is delayed for 14 days after the Purchaser as been notified thatthe Goods are ready for despatch, the Purchaser shall take delivery or arrange for storage andfor purposes of Clause 13 (Payments) and Clause 12 (Risk and Retention of Title) the Goodsshall thereupon be deemed to have been delivered, provided that if the Purchaser should fail totake or arrange for such delivery, without prejudice to any other right or remedy available to theCompany, the Company may:

(a) store the Goods until actual delivery, and charge the Purchaser for the reasonable costs(including handling and insurance) of storage; or (b) sell the Goods at the best price readily

obtainable and (after deducting all reasonable storage and selling expenses) account to thePurchaser for the excess over the price under the Contract or charge the Purchaser for anyshortfall below the price under the Contract; or (c) terminate by written notice the Contract withimmediate effect.

7. Delivery

7.1 Unless otherwise specified in the Companys tender, the price quoted includes delivery byany method of transport at the Companys option

within Australia.

7.2 Subject to the delivery area, the Company can arrange a Next Day delivery service atadditional cost, pricing upon request.

7.3 Our minimum order value for free delivery is $150.00 On orders below $150.00 an additionalhandling charge of $10.00 will be applied.

7.4 Deliveries are to the normal agreed delivery address of the account. Deliveries to site are at

the discretion of the Company or by prior agreement in writing only and may be charged for.8. Loss or Damage in Transit

8.1 All claims related to loss, shortage, damage or breakage to Goods received shall beregistered in writing within 5 days of delivery. Claims outside this period will not normally beconsidered by the Company. Full notification in writing shall be received in the above period,notifying the Company (and carrier when delivery is arranged by the Purchaser) of Advice Notenumber, date of delivery, catalogue numbers and details of faulty and/or missing Goods. A faxnumber and an e-mail address are available to speed this process.

8.2 Subject to the above, when the price quoted includes delivery, the Company shall repair orreplace free of charge or give credit for Goods damaged in transit or not delivered inaccordance with the Advice Note, as verified by the Company, in satisfaction of any liability ofthe Company in such circumstances. Where the price does not include delivery and/or thePurchaser makes delivery arrangements, the Goods are sent at the Purchasers risk.

9. Return of Goods

9.1 Goods returned without the written permission of the Company cannot be accepted and willbe redirected to the Purchaser, at the Purchasers cost, on the next available delivery.

9.2 At the Companys discretion, Standard Products (as listed in the Companys currentPublished Price List) are acceptable for return.

This must be within one year of purchase and provided they are unused, in mint condition andthe packaging is in acceptable condition.

These will be subject to a handling charge of 15% of the original invoiced value. Application forthe return of products must be made to the

Companys local representative and permission obtained prior to the submission of a debit note.Original invoice numbers and catalogue numbers must also be quoted.

9.3 The returns facility does not apply to products containing lead acid batteries.

9.4 Custom, Modified and Obsolete products are all non-returnable.

9.5 Where Goods are debited as available for collection and are subsequently are not available,after the second attempt to collect, the debit note must be withdrawn.

10. Rejection

10.1 Unless otherwise agreed, Goods rejected by the Purchaser as not complying with theContract must be so rejected within 5 days of receipt by the Purchaser by immediate notice inwriting to the Company.

11. Force Majeure

11.1 The Company shall be under no liability for any loss or injury suffered by the Purchaserwhere the Company is prevented from carrying out any provisions of the contract as a result ofany cause beyond its reasonable control including (but not limited to) Acts of God, legislation,war, fire, drought, failure of plant or power supply or collapse of structure, lock-out, strike orother action taken by employees in contemplation of furtherance of a trade dispute or owing toany inability to procure materials required for the performance of the contract. The contract shall

be suspended during such delay but upon cessation of the cause of delay, the contract shallagain become fully operative provided that if such delay shall exceed a period of twelve months,either party may give written notice of termination of this contract and thereupon the contractshall terminate.

12. Risk and Retention of Title

12.1 The Goods shall be at the Purchasers risk of loss or deterioration or of damage to theGoods or any part thereof, subsequent to delivery.

12.2 Notwithstanding that the Purchaser, its servants, agents and employees may obtainpossession of the Goods, the property in the Goods shall remain with the Company until allsums payable at any time by the Purchaser to the Company whether under this Contract ofunder any other contract (including interest) have been discharged in full and unconditionally.The Purchaser shall as a mere bailee and on a fiduciary basis for the Company, store theGoods while in his possession in such a way that they can be readily identified as the sole andabsolute property of the Company.

12.3 Pending payment of the full purchase price of the Goods the Purchaser shall at all timeskeep the Goods comprehensively insured against loss or damage by accident, fire and theft inan amount at least equal to the balance of the price for the same from time to time remainingoutstanding.

12.4 If before such payment in full, the Goods shall be sold or otherwise disposed of to a third -party, the Company shall be entitled to all monies and rights which, but for these provisions,

would otherwise be due to the Purchaser arising from such sale or disposition and thePurchaser shall (if required by the Company) assign to the Company, or as the Company maydirect at the Purchasers cost, any claim against such

12.5 The Company reserves the right to deal with its property in any manner it think fit and shallbe at liberty at any time to retake possession of the same or any part thereof and for thatpurpose the Purchaser irrevocably authorises the Company, its officers, servants and agents toenter without notice into or upon any premises of the Purchaser or upon any premises of whichthe Purchaser has possession or control. The Purchaser irrevocably instructs all and any of itsofficers, servants or agents to deliver up any such property in their possession.

12.6 If any of the Goods shall be incorporated into other Goods which are the property of thePurchaser before the price is paid in full the property in the whole of such Goods shall be andshall remain with the Company until the price has been paid in full and all the Companys rights

hereunder in the Goods shall extend to those other Goods.

13. Payments

13.1 Subject to Clause 13.2 below, payment shall be received by the Company no later than thelast day of the month following the month of invoice, unless other payment terms have beenagreed in writing.

13.2 The granting of credit facilities is at the Companys sole discretion and the Contract shallbe subject to the Companys being satisfied as to the Purchasers credit references, and withoutprejudice to the generality of the foregoing, the Company may (in its absolute discretion),

having informed the Purchaser that the Goods are ready for despatch, refrain from deliveringthe Goods until such time as the Purchaser tenders the purchase money to the Companytogether with any outstanding amounts which may be due to the Company on any accountwhatsoever.

13.3 The time of payment of the invoiced amount shall be of the essence of the Contract.

13.4 Without prejudice to any other rights the Company reserves the right to suspend and/orcancel further deliveries of Goods under any Contract with the Purchaser without notice if thePurchaser fails to settle his account on the due date and further to charge the Purchaser


46/48

42

interest (both before and after any judgement) on the amount unpaid at the rate of 1.5 percentper annum from time to time until payment in full is made (a part of a month being treated as afull month for the purpose of calculating interest).

14. Samples

14.1 Unless expressly agreed between the parties to the contrary, samples must be returnedwithin 90 days of receipt. The Company reserves the right to charge for any product samples

not returned in good order within 90 days of receipt.15. Warranty

15.1 SUBJECT TO THE LIMITATIONS ON ITS LIABILITY SET OUT IN THIS CLAUSE 15 ANDELSEWHERE IN THESE CONDITIONS, THE COMPANY WARRANTS THAT THE GOODSWILL CORRESPOND WITH THE COMPANYS SPECIFICATION AND BE FREE OFDEFECTS IN MATERIALS OR WORKMANSHIP AT THE TIME OF DELIVERY. SAVE ASAFORESAID, ALL CONDITIONS, WARRANTIES AND REPRESENTATIONS EXPRESS ORIMPLIED WHETHER BY STATUTE, COMMON LAW OR OTHERWISE IN RELATION TO THEGOODS (APART FROM TERMS IMPLIED AS TO TITLE UNDER THE SALE OF GOODS ACT1979) ARE HEREBY EXCLUDED.

15.2 The Company will make good, by repair or by the supply of a replacement at theCompanys option, defects which, under proper use, appear in the Goods within a period oftwelve calendar months (or such period as may be advised on specific Goods from time totime) after the Goods have been delivered and arise solely a failure to conform to the warrantyabove; provided always that non-conforming parts have been returned to the Company if theCompany shall have so required. The Company shall refund the cost of carriage on suchreturned parts and the repaired or new parts will be delivered by the Company free of charge.

15.3 Nothing in these Conditions shall exclude or limit the Companys liability for fraud or fordeath or personal injury caused by its negligence or any other liability to the extent that thesame may not be excluded or limited as a matter of law (but except as so provided the

Company does not accept, and hereby excludes, any liability for negligence).15.4 The warranty given in this Clause 15 is subject to the following provisos, namely: (a) thatthe Purchaser shall have followed all instructions issued by the Company in relation to and notneglected, misused or improperly altered or repaired the Goods; (b) that (i) in the case ofdefects which would have been reasonably apparent to the Purchaser on reasonableexamination of the Goods on delivery, the Purchaser shall have notified the Company of thedefects in writing within ten working days of delivery; or (ii) in the case of any other defects, thePurchaser shall have notified the Company of the defects in writing within five working days ofthe date when the defect became apparent (provided such notice shall have been given duringthe warranty period set forth in Clause 15.1 above); (c) that the defect has not arisen from or isattributable to any drawing, design or specification supplied by the Purchaser; (d) that thewarranty in this Clause 15 does not cover fair wear and tear; (e) that the warranty in thisClause 15 does not extend to parts, materials or equipment not manufactured by theCompany; and (d) that where in discharge of its obligations under the warranty given in thisClause 15 the Company agrees that the Purchaser may undertake any repair or remedial workon its behalf, the cost of such work shall have been agreed in writing between the Purchaserand the Company before the commencement of any such repair or remedial work.

15.5 The Company shall not be liable for any costs, claims, damages or expenses arising outof any tortious act or omission or any breach of contract or statutory duty calculated byreference to profits, income, production or accruals or loss of such profits, income, production

or accruals or by reference to accrual of such costs, claims, damages or expenses on a timebasis.

15.6 Without prejudice to Clause 15.3, and notwithstanding the unenforceability or invalidity ofany other provision in these Conditions, the Companys maximum aggregate liability arising outof or in connection with Goods and/or a Contract or any collateral contract, whether arising incontract, tort (including negligence) or otherwise, shall in no circumstances exceed the contractprice of the Goods in respect of any single event or series of connected events.

16. Third Party Rights

16.1 In the event of any claims being made or action brought against the Purchaser in respectof infringements of patents, copyrights or other rights of third parties by the use, manufactureor sale of any article supplied by the Company immediate written notification must be given tothe Company, who shall be at liberty with the assistance of the Purchaser if required, at theCompanys expense to conduct all negotiations for settlement of the same or any litigation thatmay arise therefrom. Subject to such notification and control of any proceedings, the Companywill indemnify the Purchaser in respect of such claims, provided always that:

(a) the Goods in question have not been used for any purpose other than those for which theywere sold; and (b) the Purchaser has made no admission, payment or compromise in respectof the alleged infringement without the prior written consent of the Company;

(c) the Purchaser has done nothing which would or might vitiate any insurance policy or coverwhich the Purchaser might have in relation to such infringement and has used its best

endeavours to recover any sums due thereunder (and this indemnity does not apply to theextent that the Purchaser recovers any sums under any such policy or cover);

(d) the Company is entitled to the benefit of, and the Purchaser has accordingly accounted tothe Company for, any damages and costs payable to the Purchaser by any other party inrespect of any such claim; and (e) without prejudice to any duty of the Purchaser at commonlaw, the Company is entitled to require the Purchaser to take such steps

as the Company may reasonably require to mitigate or reduce any such loss, damages, costsor expenses for which the Company is liable to indemnify the Purchaser under this Clause 16.

16.2 The Purchaser shall indemnify and hold harmless the Company at all times from andagainst any and all actions, claims, losses (including, without limitation, economic loss, loss ofprofit, revenue or goodwill) damages, costs (including legal costs) and expenses incurred by, orawarded against, the Company in connection with, or paid or agreed to be paid by theCompany in settlement of, any claim for alleged infringement of any rights of any third party asa result of the carrying out by the Company, its servant, subcontractor or agent of any workrequired to be done to Goods in accordance with the requirements or specifications of thePurchaser.

17. Copyright

17.1 All drawings descriptions and other information supplied by the Company together withthe copyright therein shall remain the property of the Company.

18. Arbitration

18.1 If at any time any questions, dispute or difference whatsoever shall arise between thePurchaser and the Company upon, in relation to

or in connection with the contract, either the Purchaser or the Company may give to the othernotice in writing of the existence of such

question, dispute or difference, and the same shall be referred to the arbitration of a person tobe mutually agreed upon, or failing agreement within 14 days of receipt of such notice, of someperson appointed by the President for the time being of the Institution of Electrical Engineers,provided that either party may seek provisional or interim relief from any court of competent

jurisdiction without waiver of this Clause.

19. Insolvency

19.1 This Clause 19 applies if: (a) the Purchaser becomes insolvent or makes any voluntaryarrangement with its creditors or becomes subject to an administration order or(being an individual or firm) becomes bankrupt or (being a company) goes into liquidation(otherwise than for the purposes of amalgamation or reconstruction); or (b) an encumbrancertakes possession, or a receiver or administrative receiver is appointed, of any of the property

or assets of the Purchaser; or (c) the Purchaser ceases, or threatens to cease, to carry onbusiness; or (d) the Company reasonably apprehends that any of the events mentioned aboveis about to occur in relation to the Purchaser and notifies the Purchaser accordingly.

19.2 If this Clause 19 applies, then without prejudice to any other right or remedy available tothe Company, the Company shall be entitled to cancel the Contract or suspend any furtherdeliveries under the Contract without any liability to the Purchaser, and if the Goods have been

delivered but not paid for, the price shall become immediately due and payable notwithstanding any previous agreement or arrangement to the contrary.

20. Statutory and other Regulations

20.1 If the cost to the Company of performing its obligations under the Contract shall beincreased or reduced by reason of making or amendment after the date of tender of any law orof any orders, regulation, or bye-law having the force of law that shall affect the performance ofthe Companys obligations under the Contract, the amount of such increase or reduction shallbe added to or deducted from the contract price as the case may be.

21. Legal Construction

21.1 Failure by the Company to exercise or enforce any rights hereunder shall not be deemedto be a waiver of any such right nor operate so as to bar the exercise or enforcement thereof atany time or times thereafter.

21.2 If any provision or part of a provision of these Conditions is or shall be found by any courtof competent jurisdiction to be, invalid or unenforceable, such invalidity or unenforceability shall

not affect the other provisions or parts of such provisions of these Conditions, all of which shallremain in full force and effect.

21.3 The Purchaser may not assign all or any of its rights or obligations under any Contractwithout the prior written consent of the Company.

21.4 Any notice to be given pursuant to these Conditions shall be deemed to have been dulygiven to a party if delivered by hand or sent by special delivery or facsimile to that partysregistered office or principal place of business or such other address as may have beennotified pursuant to this provision to the party giving the notice. Notices shall be deemed tohave been served on delivery if delivered by hand or 48 hours after despatch if sent by specialdelivery and notices sent by facsimile shall be deemed to have been served when sent. Inproving service by hand delivery or by special delivery it shall be sufficient to prove that thenotice was properly addressed and delivered and in proving service by facsimile, it shall besufficient to provide evidence of a successfully completed transmission report to the relevantfacsimile number.

21.5 Unless otherwise agreed in writing the Contract shall in all respects be construed andoperate as an English contract and in conformity with Australian law.

Terms and Conditions of Sale

Our R&D team are always available to give technical assistance with product selection and installation requirements


47/48


48/48

Cooper Industries Australia

205-209 Woodpark Road

Smithfield NSW 2164

Tel: (02) 8787 2777

Fax: (02) 9609 2342

Email: [email protected]

Local Authorised Cooper Safety Distributors:

In Australia

Illuminating Solutions

PO Box 147

Dickson ACT 2602

Tel: (02) 6247 4555

In New Zealand

Ellisco

105 Morrin Road

Panmure Auckland

New Zealand

L. & J. Pretorius Pty. Ltd.

34 Innocent Street

King Meadow, TAS 7249

Tel: (03) 6344 2686

Tambar Pty. Ltd.

Unit 1/17 Camuglia Street

Townsvi lle, Nth QLD 4810

Tel: (07) 4774 5214

In Fiji

Midlink Marketing

PO Box 12944

Suva, Fiji Islands

Tel: 338 2300

Please in-sert Get

Connected

LOGO here

Documents

Menvier Cat 2009_Bussmann Lo