Metal Framing Clip Connector and Framing Hardware

  • View
    67

  • Download
    3

Embed Size (px)

DESCRIPTION

metal framing connections and framing materials structural connections of cold formed metal framing clark dietrich

Text of Metal Framing Clip Connector and Framing Hardware

  • Deflection Clips &Connectors

    Head-of-Wall Deflection Systems

    Rigid Connectors

    Floor Joist FramingConnectors

    Bridging, Bracing &Backing Systems

    Truss Framing

    Fire-Rated Connectors

    Specialty Clips,Connectors & Fasteners

    Drywall FinishingAccessories

    The place to stopbefore the building starts!SM

    About Worthington IndustriesWorthington Industries is a leading diversified metal processing company with annual sales of approximately$3 billion. The Columbus, Ohio, based company is North Americas premier value-added steel processor anda leader in manufactured metal products such as metal framing, metal ceiling grid systems, pressure cylinders,automotive past model service stampings and laser welded blanks. The company employs more than 8,000people and operates 64 facilities in 10 countries.

    Copyright 2008 by Dietrich Industries, Inc. All rights reserved. DMF08/2008Printed in USA Form# 155 25M 09-08

    Plant LocationsWorld Headquarters

    200 Old Wilson Bridge Rd.

    Columbus, OH 43085

    800-873-2604

    United StatesArizona Phoenix ............... 602-447-0204

    California Colton ................ 909-824-9717Stockton .............. 209-547-9066

    Colorado Denver ................ 303-289-4092Florida Miami .................. 305-652-5423

    Georgia McDonough........ 678-304-5500Hawaii Kapolei ................ 808-682-5747Illinois Joliet ................... 815-207-0110

    Indiana Hammond ........... 219-931-3741Kansas Lenexa ................ 913-599-2026

    Maryland Baltimore............. 410-477-8700Massachusetts Lunenburg........... 978-342-9742

    New Jersey Boonton............... 973-335-3240Ohio Warren ................ 330-372-4014

    Texas Baytown .............. 281-383-1617Hutchins .............. 972-225-1100

    Washington Renton ................ 425-251-1497International Miami .................. 305-652-5423

    CanadaEdmonton ....................................... 780-469-9850Montreal ......................................... 514-368-7005Toronto ........................................... 905-565-9665Vancouver ...................................... 604-434-3737

    Other Dietraich DivisionsAccelerated Building Technologies 412-490-5037Aegis Metal Framing ...................... 314-851-2200Vinyl Corp. ...................................... 800-648-4695Dietrich Design Group North .......... 800-873-2443

    or ............................... 219-853-9474Dietrich Design Group South.......... 800-873-2443

    or .............................. 678-304-5525Dietrich Design Group West ........... 800-873-2443

    or .............................. 760-931-0465

    dietrich metalframing com

    $12.95

    D

    i

    e

    t

    r

    i

    c

    h

    M

    e

    t

    a

    l

    F

    r

    a

    m

    i

    n

    g

    T

    h

    e

    M

    e

    t

    a

    l

    F

    r

    a

    m

    i

    n

    g

    C

    l

    i

    p

    ,

    C

    o

    n

    n

    e

    c

    t

    o

    r

    ,

    &

    F

    r

    a

    m

    i

    n

    g

    H

    a

    r

    d

    w

    a

    r

    e

    C

    a

    t

    a

    l

    o

    g

    A

    W

    o

    r

    t

    h

    i

    n

    g

    t

    o

    n

    I

    n

    d

    u

    s

    t

    r

    i

    e

    s

    C

    o

    m

    p

    a

    n

    y

    081016 DMF_ClipExp08_ofc&obc:DMF_ClipExp07_ofc&obc 6/24/10 3:29 PM Page 1

  • dietrichmetalframingcomThe place to stopbefore the building starts!SM

    Take your own personal tour of North Americasmost advanced resource for metal framing.

    dietrich metalframing comrequest a quote online @

    CADLibraryTo assist you with

    designing and

    detailing. Our entire

    library is available in

    DWG, DXF and PDF

    file formats.

    ProjectSubmittalsDietrichs on-line

    submittal system is the

    easiest way to create job submittals.

    Point, click and print for fast, professional project submittals.

    We make it easy for you to do business!

    www.dietrichmetalframing.com is one of the most advanced

    resources for metal framing information in the industry. From

    extensive product information, to on-line catalogs, to video

    installations, this site is your resource to building better, faster

    and more profitably.

    dietrich metalframing com

    INTRODUCTION

    Dietrich Metal Framing is the largest producer of cold-formedmetal framing products in the world. As the industry leader,Dietrich provides the widest selection of products, systems,services and companies to provide the construction industrywith integrated, low-cost, single-source cold-formed framingsolutions. Dietrich believes leadership is about action notsimply position. Thats why we continually strive to expandour existing markets, develop framing technologies, createvalue-added systems and introduce countless new productsto meet the ever-changing demands of the building andconstruction industry.

    The Dietrich Clip ExpressSM delivery service is one of thenewest innovations from Dietrich Metal Framing. TheDietrich Clip ExpressSM delivery service is a dedicated productand delivery service specializing in meeting the connector, connection, support and framing hardware needs of the commercial and residential building industry. This highly specialized and focused support arm of Dietrich Metal Framingprovides you with the widest array of rigid, deflection, bridging and general-purpose clips, connectors, and light-gaugeframing hardware.

    Clips, Connectors and Framing Hardware The Dietrich Clip ExpressSM service is your one stop shop for the widest and most cost-effective array of rigid, deflection, bridging and general-purpose clips, connectors,supports and framing hardware for light-gauge steel framing. Having the right products,at the right time and at the right price is critical to getting the job done. Turn to Dietrich ClipExpresssm as your source for:

    Deflection Clips & Connectors Head-of-Wall Deflection Systems Rigid Connectors Floor Joist Framing Connectors Bridging, Bracing & Backing Systems Shear Wall and Header Connectors Truss Framing Fire-Rated Connectors Specialty Clips, Connectors

    and Fasteners Drywall Finishing Accessories

    Why Choose Dietrich?When you choose Dietrich Metal Framing clips,connectors and hardware you not only get thehighest-quality product available, you get thepeace-of-mind knowing your project is backedand supported by the largest light-gauge framingmanufacturer in the world. You get the peace-of-mind knowing that our products have beenextensively tested at our ICC certified testinglaboratory. Thats not all. You get:

    Industrys Widest Product Selection Single Sourcing Low Cost to Lowest Installed

    Costs Products

    Next Day Delivery Available Engineered Systems-Minimized Liability Labor Saving Solutions Product and Installation Training FastClip Deflection Technology Total Light-Gauge System Responsibility Local Manufacturing with

    Global Distribution

    Expert Technical Support LEED Certification

    081016 DMF_ClipExp07_ifc&ibc:DMF_ClipExp07_IFC&IBC 6/24/10 3:18 PM Page 1

  • 1Whats InsideSection Page(s)

    Overview . . . . . . . . . . . . . . . . . . . . 117

    Deflection Connectors . . . . . . . . 1839

    Rigid Connectors . . . . . . . . . . . . 4081

    Floor Framing Connectors . . . . 82105

    Bridging, Bracing & Backing . . . . . . . . . . . . . 106117

    Roof and Truss Connectors . . . 118125

    Specialty Clips and Connectors. . . . . . . . . . 126135

    Drywall Finishing Products . . 136142

    HDS Preliminary Sizing Sheet . . . 143Material Certification . . . . . . . 144145LEED Certification . . . . . . . . . . . . . 146Specification Options . . . . . . . . . . . 147CAD Detials . . . . . . . . . . . . . . . 148149Index . . . . . . . . . . . . . . . . . . . . 150152

    Typical Clip & Connector ProjectsCOMMERCIAL High-Rise Mid-Rise Low-Rise Retail Office Buildings Hotels/Motels

    INSTITUTIONAL Universities Schools Medical Centers Religious Hospitals

    RESIDENTIAL Single Family Multi-Family Assisted Living Military Housing Manufactured

    & Modular Housing Apartments

    & Condominiums

    What You Get You get what you want, when you want it and how you want it. You get real service, not lip service.You will find the most knowledgeable, responsive can-do attitudes in the industry. At DietrichMetal Framing, customer service is simply not a department...its a contagious attitude.

    How and When You Get It You decide. If we get your order today, you can have it tomorrow. The Dietrich Clip ExpressSM

    delivery service offers a wide array of shipping options from standard ground to overnight express.We understand that in todays fast track construction environment, keeping a project on schedule is critical. Count on us to get it where, when and how you want it.

    PRICE IS IMPORTANT...Dietrich Delivers Both.

    ...service even more

    Cover photo courtesy of AA Stucco & Drywall, Inc. Naples, FL

    081016 DMF Catalog 1-17.qxd:Pgs 1-17 6/24/10 3:33 PM Page 1

  • dietrich metalframing com

    PhoenixColton

    Stockton

    Renton

    Vancouver

    Edmonton

    Kapolei, HI

    about DIETRICHCLIP EXPRESS

    The Dietrich Clip ExpressSM Service is a dedicated and streamlined support and delivery system for steel framing connection products. Its your source for fast and economicalconnection solutions. No matter what your needs, The DietrichClip ExpressSM Service can provide you with the products, pricingand quantities you need to keep your project moving. With hugefinished product inventories and a ship-it-now mentality, wellkeep you on-time and under budget. With over 100 varieties ofclips and connectors to select from you can decide what worksbest for you. Choose from low cost products to our high performance line of lowest installed cost products or systems.

    Look for the Blue and Orange Bucket. Your clip and connector orders areshipped in waterproof, easy to carry, easy to spot bright orange and bluebuckets. The buckets are easily resealable and when the clips are gonethey can be used for a variety of jobs around the construction site.

    2

    TM

    081016 DMF Catalog 1-17.qxd:Pgs 1-17 6/24/10 3:33 PM Page 2

  • 3Your Local SupplierWith more than 40 manufacturing and service locations

    strategically positioned throughout North America,were your local company ready to deliver what you

    need, when you need it. Many customersrequire technical engineering support,breadth of products and procurementsourcing programs unavailable fromsmaller regional or local competitors.

    Manufacturing and Sales Locations

    United StatesArizona Phoenix ............... 602-447-0204

    California Colton ................ 909-824-9717

    Stockton .............. 209-547-9066

    Colorado Denver ................ 303-289-4092

    Florida Miami .................. 305-652-5423

    Georgia McDonough........ 678-304-5500

    Hawaii Kapolei ................ 808-682-5747

    Illinois Joliet ................... 815-207-0110

    Indiana Hammond ........... 219-931-3741

    Kansas Lenexa ................ 913-599-2026

    Maryland Baltimore............. 410-477-8700

    Massachusetts Lunenburg........... 978-342-9742

    New Jersey Boonton............... 973-335-3240

    Ohio Warren ................ 330-372-4014

    Texas Baytown .............. 281-383-1617

    Hutchins .............. 972-225-1100

    Washington Renton ................ 425-251-1497

    International Miami .................. 305-652-5423

    Clip Express ........................... 866-638-1908

    CanadaEdmonton ....................................... 780-469-9850Toronto ........................................... 905-565-9665Vancouver ...................................... 604-434-3737

    Other Dietrich DivisionsDietrich Metal Framing Canada ..... 780-437-1763

    Accelerated Building Technologies 412-490-5037

    Aegis Metal Framing ...................... 314-851-2200

    Vinyl Corp. ...................................... 800-648-4695

    Dietrich Design Group North .......... 800-873-2443

    or ............................... 219-853-9474

    Dietrich Design Group South.......... 800-873-2443

    or .............................. 678-304-5525

    Dietrich Design Group West ........... 800-873-2443

    or .............................. 760-931-0465

    Dietrich Metal Framing, a Worthington Industries Company, is the leading manufacturer of light-gauge framingand finishing products, systems and services for commercial and residential construction. Dietrich offers thelargest selection of cold-formed framing and finishing products including drywall and structural framing, floorjoists, roof trusses, metal lath, fire-rated assemblies, clips and connectors, numerous deflection systems andan extensive line of metal, vinyl, veneer, paper-faced, plaster and stucco beads and trims.

    Dietrich Metal Framing companies and divisions include Dietrich Metal Framing CANADA, Dietrich DesignGroup, Aegis Metal Framing, Vinyl Corp., and Accelerated BuildingTechnologies Systems. Together, we provide superior, cost-effective,single-source building and framing solutions.

    Dietrich Metal Framing, Dietrich Clip Express, and Dietrich, are tradenames, trademarks and/or service marks of Dietrich Industries, Inc.Dietrich and its divisions operate more than 40 manufacturing andservice locations throughout North America.

    Miami

    Baytown

    Hutchins

    Lenexa

    Denver Joliet

    Warren

    CLIP EXPRESS HUBS1.866.638.1908

    LunenburgToronto

    ton

    Boonton

    Baltimore

    McDonough

    Corporate Headquarters

    200 Old Wilson Bridge Rd.

    Columbus, OH 43085

    800-873-2604

    Hammond

    081016 DMF Catalog 1-17.qxd:Pgs 1-17 6/24/10 3:34 PM Page 3

  • dietrich metalframing com

    Connections play a vital role in the performance of light-gaugeframing assemblies. Connectors, clips or framing hardware areused to either make or support cold-formed framing connections. The most common types of connections are rigid( fixed) connections and deflection (movement) connections.Dietrich Metal Framing provides one of the widest selections ofconnectors, clips, supports and framing hardware for just aboutevery rigid or deflection connection. This wide selection ofoptions gives the designer the ability to attain optimalperformance at the most economical costs.

    4

    understanding FRAMINGCONNECTIONS

    Rigid Connectors Rigid connectors and supports are used in a variety of ways to secure cold-formed framingmembers to each other or to the building structure. Some of the most common types ofrigid or fixed connections include joist connections, punched openings, beam/wall connections and bridging, header and truss connections.

    Dietrich Metal Framing provides one of the widestselections of rigid connectorsand supports available. Thisextensive line provides a widearray of options to provide themost efficient load transferpath.

    Design Considerations One of the most important considerations is load transfer. Whensizing a connector, it is important to consider forces in all directions. This could include shear, vertical or horizontal, tension, compression or moments. For the purpose of this catalog,the load capacities are defined by direction as listed below.

    F1 = Shear F2 = Tension F3 = Compression M = Moment or Rotation

    When we developed our extensive line of clips, connectors andframing hardware we did so with two key elements in mind:Provide cost effective solutions that satisfy design and performance requirements and reduce or streamline installation. By partnering with architects, specifiers,designers, engineers and installers, we were able to learn,understand and ultimately develop products and technologiesthat provide highly cost-effective solutions that satisfy buildingrequirements. Many of our products were developed by or inconjunction with framing installers who desperately sought efficient solutions to common framing problems. We delivered.

    FastClip Technology Many of the Dietrich clips are embossed andprepunched to ensure accurate fastener placement and proper clip performance. TheFastClips and Uni-Clips also feature reinforced and stiffened corners that providesuperior design values for maximum performance and economy.

    PRODUCTand performanceENHANCEMENTS

    F3

    F2

    F1

    M

    081016 DMF Catalog 1-17.qxd:Pgs 1-17 6/24/10 3:34 PM Page 4

  • 5Easy-to-Read and Clearly Marked Connectors All too often, clips, connectors and supports arefabricated or made from local job shops or onthe jobsite from generic or surplus framing materials, which may or may not be the proper gauge,strength or coating needed to meet specific performance criteria.

    In order to alleviate any liability or performance issues, Dietrich embosses almost every clip, connector or support with easy-to-find andeasy-to-read product identifiers so you can quickly verify that the properclip or connector is being used. When you design or specify by part nameor number, you know youre getting an engineered connector and willeliminate any weak link between design and installation.

    FastClipDeflection

    Screw

    Deflection DistancesDeflection distance is a measure of the maximum vertical distance that the primary structure is anticipated to move due to the imposition and orremoval of live loading. Dietrich deflection productspermit deflection ranging from 1/2" to over 4" based on thespecific product. Each catalog page indicates the range ofdeflection so the designer can easily and economically choosethe correct connector to meet their specific requirements.

    Standoff DistancesStandoff distance is defined as the distancebetween the secondary frame andthe primary frame. The primary frame is the mainbuilding structural supportusually consisting of red ironor concrete. The secondary frame isthe curtain-wall assembly comprised ofcold-formed light steel framing. Thestandoff distance allows for the framerto install the cold-formed framing in atrue line while the structure of the building may vary either in or out or mayvary out of plumb from floor to floor. Dietrichdeflection clips permit or accept standoff fromas little as 1/8" up to 21" inches to accommodate just about every framing condition. Custom products are available to accommodate even greater standoff.

    FastClip Fasteners Many of the Dietrich deflection clips includeour proprietary FastClip deflection screwthat has been specifically designed to providefriction-free deflection. These fasteners feature a smooth shoulder that eliminate drag,binding or resistance that can often occur withcommon fasteners. FastClip deflection screw:

    Ensures friction-free deflection Reduces the potential for over

    tightening

    Eliminates the chance of using wrongfasteners

    Correctly indicates proper fastenerplacement

    No bushings or additional pieces thatfall out, get lost or never get used.

    DeflectionConnectors Deflection or movement connectionsare designed to permit movement of the primary structure of the building without imposingany axial loading onto the exterior curtain wall orinterior head of wall. Movement of the primarystructure may result from thermal expansion and contraction, seismic disturbances, foundation settling or normal head ofwall compression. Deflection connectors are used in awide array of framing conditions including exterior,bypass, head of wall or infill and interior head of wall.Dietrich Metal Framing provides one of thewidest selections of deflection and slipconnections available. Thisextensive line provides awide array of options fromlowest installed costs tolowest unit costs so you candecide what works best for yourparticular situation. Many of the Dietrich

    deflection clips feature FastClip technology. These FastClips areembossed with fastening patterns toensure accurate and proper placement of fasteners. SpecialtyFastClip Deflection Screws are also provided with each clip to ensure friction-free deflection.

    081016 DMF Catalog 1-17.qxd:Pgs 1-17 6/24/10 3:34 PM Page 5

  • Screw Connections Self-Drilling Screws are externally threaded fasteners with the ability to drill their own hole andform, or tap, their own internal threads without deforming their thread and without breakingduring assembly. These screws are high-strength, one-piece installation fasteners and are used if theconnection is multiple thicknesses of 33 mil steel or thicker. One of the more common self-drillingscrews is a #10-16 x 5/8 HWH SD, which indicates a 10 diameter shaft, 16 threads per inch, 5/8length, hex washer head self-drilling screw.

    FastClip Deflection Screws Many of the Dietrich deflection clipsinclude our proprietary FastClip

    fastener that has been specificallydesigned to provide friction-freedeflection. These fasteners eliminatedrag, binding or resistance that canoften occur with common fasteners.

    dietrich metalframing com

    FASTENING OPTIONS

    Connections can be made using a variety of fastening options.It is critical to specify the proper fastener to ensure the properperformance of the connections used in light-gauge (cold formed)steel construction. The most common and widely used connectionmethods include screw connections, welding connections andpowder-driven fastener connections. Each type of connectionmethod has various advantages and disadvantages. Therefore,we provide data for the three most common types so you canchoose your preferred connection method.

    6

    #8 Screws (.16" Dia) #10 Screws (.19" Dia) #12 Screws (.21" Dia) 1/4" Dia ScrewsGauge Fy (ksi)

    Shear Pullover Pullout Shear Pullover Pullout Shear Pullover Pullout Shear Pullover Pullout20 33 129 154 56 140 231 66 147 309 73 158 309 8418 33 191 201 73 208 301 86 219 401 96 234 401 10916 33 267 252 91 293 378 109 308 505 120 329 505 13716 50 267 382 139 373 573 165 467 765 182 499 765 20814 33 267 317 115 373 476 137 435 635 151 465 635 17314 50 267 481 174 373 722 207 533 962 229 693 962 26212 33 267 453 164 373 680 195 533 906 216 693 906 24612 50 267 686 249 373 1030 296 533 1373 327 693 1373 37310 33 267 553 201 373 830 238 533 1107 263 693 1107 30110 50 267 838 304 373 1258 361 533 1677 399 693 1677 456

    Allowable Screw Design Values (lb)

    Average Ultimate Shear 2400 lbsNASPEC 2001 ASD Factor of Safety 3.0Average Allowable Shearload 800 lbs

    FastClip Deflection Screw

    Assumed screw head diameter is 3/8".Screw ultimate shear capacity is based on Buildex DATA as a minimum.

    The load value listed is for single shear. There maybeother controlling shear failure modes specific to theapplication (e.q. pull-through from slot, bearing failure)which are to be considered seperately in the design ofthat perticular application.

    081016 DMF Catalog 1-17.qxd:Pgs 1-17 6/24/10 3:34 PM Page 6

  • 7WeldsGauge Fy (ksi)

    FilletFlare

    Groove20 33 *** ***18 33 482 40516 33 606 51016 50 721 51014 33 762 64114 50 907 64112 33 1087 91512 50 1294 91510 33 1328 111810 50 1581 1118

    Allowable Weld Design Values(lbs) per inch of weld

    PinGauge and Yield Strength (ksi) of Connected Part

    Diameter20 18 16 14 12 1033 33 33 50 33 50 33 50 33 50

    0.145" 179 233 292 443 368 558 526 796 642 9720.177" 218 285 357 541 450 681 642 972 783 1187

    Allowable Hilti* Bearing Against Sheet Steel Design Values (lbs)

    Fastener Shank 1/8" Steel 3/16" Steel 1/4" Steel 3/8" Steel 1/2" Steel 3/4" SteelType Diameter Shear Tension Shear Tension Shear Tension Shear Tension Shear Tension Shear Tension

    X-EDNI .145" 230 110 425 455 620 800 680 810 605 850 545 500DS .177" 795 390 625 620 780 780 810 560

    Allowable Hilti* Powder-Driven Fastener Design Values in Structural Steel (lbs)

    Shear values shall be checked against allowable bearing design values. The minimum value shall be used for design.Tension values shall be checked against pullout or pullover values and the minimum value used.Reference Hilti North America Products Technical Guide 2001 section 3.2.3.

    Fastener Shank Min 2000 psi 3000 psi 4000 psi 6000 psiType Diameter Embed. Shear Tension Shear Tension Shear Tension Shear Tension

    5/8" 60 45

    X-DNI .145"3/4" 95 70 110 90 125 110 95 751" 140 90 160 120 185 155 195 130

    1-1/2" 230 165 280 190 335 215 DS .177" 1-7/16" 250 150 285 205 330 275

    Allowable Hilti* Powder Driven Fastener Design Values in Normal Weight Concrete (lb)

    Shear values shall be checked against allowable bearing design values and the minimum value used.Tension values shall be checked against pullout or pullover values and the minimum value used.Reference Hilti North America Products Technical Guide 2001 section 3.2.3.1

    Powder-Actuated Connections Powder-actuated or low velocity driven-fasteners are commonly used to attach cold-formed steelframing members to concrete or structural steel supports. Drive pins are used for permanentattachments and are the most common type used for cold-formed construction.

    Flare Bevel

    Powder Driven Fasteners in Concrete

    Minimum Fastener Spacing and Edge Distances:Light-Gauge SteelMinimum Slab Thickness: 3"

    4"

    Powder-Driven Fasteners in Steel

    Flare V

    4"

    Minimum Fastener Spacing and Edge Distances:Light-Gauge Steel

    Welded Connections Fillet welds are used to make lap joints, cornerjoints and T-joint connections. As the illustrationsuggests, the fillet weld is roughly triangular incross-section, although its shape is not alwaysa right triangle or an isosceles triangle. Weldmetal is deposited in a corner formed by thefit-up of the two members and penetrates andfuses with the base metal to form the joint.

    Flare welds, including Flare Bevel and Flare V,are used to join rounded or curved pieces.

    A Flare Bevel groove weld is commonly usedto join a rounded or curved piece to a flat piece.

    A Flare V groove weld is commonly used to jointwo rounded or curved parts.

    NOTE: For graphical clarity, the weld illustrationsdo not show the penetration of the welded material.Weld penetration is critical in determining thequality of the weld.

    Fillet welds

    .5"1.5"

    *Based on E60XX electrodes.

    *Hilti is a registered trademark of the Hilti Aktiengeseilschaft Corporation.

    081016 DMF Catalog 1-17.qxd:Pgs 1-17 6/24/10 3:34 PM Page 7

  • dietrich metalframing com

    how to USEthis MANUAL

    This catalog is designed to help you select the right product orsystem for your construction applications. It is one of the mostcomprehensive light gauge steel connector, clip, support andframing hardware manuals in the industry. This catalog is dividedinto seven major sections that are color coded for easy reference. Deflection Clips and Connectors Rigid Connectors Floor Framing Clips, Stiffeners, Supports and Hangers Bridging, Bracing and Backing Systems Roof and Truss Connectors Specialty Connectors and Fasteners Drywall Finishing Accessories

    8

    Product LabelingThe majority of the connectors in this catalog followa very simple A, B, and C product code letteringsystem. Its what we refer to as the A, B, Cs, oflight steel framing connectors. Each clip, connectoror support is clearly embossed with anidentifiable code so the installer can easily identifyand use the proper connection hardware. For theengineer or architect, the embossed markingsprovide a very easy way to field verify the correctconnector or hanger is used.

    The majority of clips are packaged in distinct,easy to spot blue and orange buckets. Eachbucket is clearly labeled with the product code,gauge, size, length, dimensions, piece counts,and any special markings as requested. Basedon order quantity, buckets will be packed inskids for easy handling. Each skid is clearlyidentified with master skid labels that displayproduct, gauge, size, length, piece count and anyspecial skid markings as requested.

    Product Page OverviewEach product page includes an extensive product overview, benefits, features andproduct and application renderings. In additionto application renderings each product pagefeatures common CAD details available atwww.dietrichmetalframing.com. Reference chartscontain size availability and packaging information.Each chart also includes metric sizing for yourconvenience.

    All load tables are presented with multiple fasteningoptions including welding, powder driven fasteningand screw connections so you can determine themost efficient fastening method thats right foryou. Each page also provides detailed fasteninginstructions including fastening patterns toachieve various levels of performance based oncondition requirements.Each section features a detailed building cutaway that showcases

    the products for that particular section.

    Comprehensive IndexA comprehensive index can be found at the back of the catalog for a quick reference guide to ourcomplete product and system offering, so you can easily locate the specific Dietrich product or sys-tem that meets your needs. This index includes common names, synonyms and even industryslang to help you quickly find exactly what youre seeking.

    Photo courtesy of AA Stucco & Drywall, Inc.

    081016 DMF Catalog 1-17.qxd:Pgs 1-17 6/24/10 3:34 PM Page 8

  • 9Yield Strength, Fy/(psi or ksi)Yield strength is the property by which the strength of steel is typicallydefined. The majority of clips, connectors, supports and framing hardwareare manufactured from mill certified, ASTM A 1003 Structural Grade 50Type H (340 MPa) steel. KSI is short for kips per square inch. One kip isequal to 1,000 pounds.

    Protective CoatingsDietrich Metal Framing offers a variety ofgalvanized products that can be selected tomeet the specific requirements of a project.

    Non-structural products have a corrosion resistantgalvanized coating that conforms to ASTMspecification A1003 G40 coating weight orequivalent corrosion protection. This coating is inaccordance with the industry standard coatingrequirements of ASTM C 645. These productscan also be ordered with enhanced coatings forspecial applications.

    Structural Framing products are available with avariety of protective coatings. G60 zinc coatingsmeet the most widely applicable building codesand we are able to provide certified G60 productthat meets the G60 coating weight provisions ofASTM to C 955. Certified G90 coatings are anenhanced option that can be requested for highlycorrosive environments. G60E coatings are aneconomical choice. G60E coatings for structuralproducts will pass the 100-hour salt spray testapplicable to equivalent coatings under ASTMA 1003, but cannot be certified by any supplierto meet the G60 minimum coating standardunder ASTM C 955. The buyer is solely responsi-ble to assure that products purchased properlysatisfy any applicable code or specification.

    Steel Thickness (Gauge)The steel thickness of a connector, clip, support or hanger is referenced in terms of gauge or mils. Thethickness or gauge is a key contributor to the strength of the product.

    Note: All products comply with ASTM standards and Federal specifications as shown in Certification ofMaterials in the back of this catalog. Minimum thickness is 95% of the design thickness per AISI code.The trend today is to refer to steel thickness in terms of mil rather than gauge. This catalog includesboth for ease of use. One mil is equivalent to 1/1000, (0.001) of an inch. The mil thickness measuresthe uncoated base metal material. A 20-gauge stud measuring the minimum uncoated base metal at0.030 inches is 30 mils thick.

    Thickness

    Gauge Mils Design Thickness Minimum ThicknessInches mm Inches mm

    20 DW 30 0.0312 0.792 0.0296 0.75120 STR 33 0.0346 0.879 0.0329 0.835

    18 43 0.0451 1.146 0.0428 1.08716 54 0.0566 1.438 0.0538 1.36714 68 0.0713 1.811 0.0677 1.72012 97 0.1017 2.583 0.0966 2.454

    Steel Thickness

    Section Title Product Illustrationswith Dimensions

    Subsection TitleLoad Tables

    Load Table Notes Color Tab

    ApplicationIllustrations

    Sizing andPackagingInformation

    ProductName and Code

    FeaturesandBenefits

    InstallationInstructions CAD

    Drawings

    *ASTM is a registered trademark of the American Society for Testing and Materials.

    081016 DMF Catalog 1-17.qxd:Pgs 1-17 6/24/10 3:34 PM Page 9

  • dietrich metalframing com10

    how to USEthis MANUAL

    continued

    Standards & SpecificationsAll structural properties are developed in accordancewith the American Iron and Steel Institutes (AISIs)Specification for the Design of Cold-Formed SteelStructural Members.

    Metric SpecificationsAt your request, Dietrich Metal Framing will providesoft metric conversions on its products and systems to help specifiers match metric designsizes. In addition, some products are availablewith hard metric dimensions from selected manufacturing facilities.

    WarrantyOur products are manufactured in accor-dance with company standards and/orindustry standards, as applicable. AllDietrich Metal Framing products are covered by our standard warranty which is contained in our Standard Terms and Conditions of Sale and which will beprovided upon request. Generally, we warrant our products will be free fromdefects in material and workmanship at thetime of shipment, subject to the limitationsstated in the warranty. Unless specificallyagreed in writing by us with respect to specific orders, we do not make any warranty of merchantability or fitness for aparticular purpose. The buyer is responsibleto assure that buyer orders the appropriateproduct for any applicable code or specifi-cation requirements.

    NOTICE: Our liability is expressly limited toreplacement of defective products. We shallnot be liable for incidental and consequentialdamages, nor for any loss caused by misuseor misapplication of our products. Any claimshall be deemed waived unless made in writing to us within thirty (30) days fromthe date it was or reasonably should havebeen discovered.

    WARNING: Not All LoadTables are Created Equal

    It is critical that the allowable load tables for clips, connectorsand fasteners are interpreted correctly. Especially when comparing the performance criteria from one companys clip toanother. The allowable load for a clip assembly is governed notonly by the capacity of the clip, but also by the method of attachment to the structure. Some manufacturers provide tablesthat display allowable loads for the clip, while ignoring theattachment to the structure. Unfortunately, when attaching aclip to the structure with pins, screws, welds or concrete anchorsthe overall capacity can often be lower than the publishedvalue. Load tables that ignore the attachment to the structureessentially imply that the clip or connector must be welded toachieve the stated values. More often than not, clips and connectors will not be welded based on the installation costs.

    In order to provide more accurate and realistic data, DietrichMetal Framing publishes its values for multiple attachmentmethods. That way the designer or engineer will have the proper information to correctly determine the appropriate clipor connector and have confidence that all load requirementshave been satisfied. As an example, the tabulated valuesDietrich provides for the FastClip includes data for 0.145 Hilti* X-EDNI pins and Buildex** #12-24 screws.

    *Hilti is a registered trademark of the Hilti Aktiengeseilschaft Corporation.

    **Buildex is a registered trademark of Illinois Tool Works, Inc.

    Be aware and make sure you arent comparing apples to oranges.

    081016 DMF Catalog 1-17.qxd:Pgs 1-17 6/24/10 3:34 PM Page 10

  • 11

    General NotesThe data contained in this brochure is intendedto be used as a general guideline only and doesnot replace the judgments and designs of aqualified architect and/or engineer. Product,application renderings and photographs areprovided as a tool to show the general intent ofthe framing or finishing application only. Theserenderings or photographs may or may not beapplicable to a specific project. They do notreplace or supercede the architect or engineer ofrecord, ASTM guidelines, national or localbuilding codes or approved industry standards.It is the responsibility of the design engineer toproperly detail project drawings and documentsfor proper clip installation.

    Install products per installationinstructions detailed in this catalog.

    Install all connectors and fastenersbefore load application.

    Do not modify, change or alter any connector in this catalog.

    Do not bend connectors unless they are specifically designed to be bent.Connectors that are not designed to be bent may fracture. Fractured steel will not carry load and must bereplaced. Connectors that are designedto be bent shall only be bent one time.

    Install fasteners per the manufacturersinstructions.

    Load tables have been developed using the following fastener data:

    Hilti 0.145 dia. X-EDNI fasteners Reference 2002 Edition of the Hilti North American Product Technical Guide, page 29 for 3/16 steel

    Hilti Kwik-Con II Reference 2002Edition of the Hilti North AmericanProduct Technical Guide, page 180

    #10-16 Screws As applicable,capacities calculated according to the AISI North American Specificationfor the Design of Cold-Formed SteelMembers. The ultimate nominal screw shear capacity must be 1400# or greater.

    Tabular footnotes must be followed and supercede general notes when in conflict.

    Fasteners other that those specified may be substituted with the approval of the engineer of record

    Allowable loads and material data listed in this catalog supercedes allinformation in previous publications

    Allowable loads, in some cases, havebeen increased 1/3rd per allowablecodes. It is important to verify that the actual installation meets therequirements to allow the 1/3rdincrease. If not the engineer of recordshould adjust the loads down.

    Listed loads are the maximummonotonic design loads to be applied to the connection based on testing or calculations. Load tables have been developed using Allowable Stress Design methodologies.

    Allowable loads are the maximum forcesapplied in one direction only. When loadsare applied in multiple directions theengineer of record is responsible toverify the maximum capabilities basedon an appropriate interaction equation

    Where maximum movements (deflections) are specified they are the total movement in both directions. The fastener positioning and size will affect the amount of allowable movement.

    Dietrich Metal Framing strongly recommendsthe following language be included in plansand specifications: Dietrich Metal Framing con-nectors were utilized in developing the plansand specifications for this project. Before substi-tuting another brand, the engineer of recordmust verify the load capacities and approve thesubstitution in writing.

    Dietrich Metal Framing reserves the rightto change or modify the information and tech-nical data contained in this catalog withoutprior notice or obligation. The informationin this catalog supercedes all previously pub-lished data. Products and systems may beimproved and/or changed after this catalog isprinted.

    All products described here may not be avail-able in all geographic markets. Consult yourlocal sales office for information.

    PatentsU.S. Patent Nos. 5,784,850; 6,021,618; 6,694,695;

    5,689,922; 6,301,854; 6,691,478;6,418,694; 6,430,890, 6,688,069 and 6,708,460 are owned by Dietrich Industries, Inc.

    U.S. Patent Nos. 5,467,570; 6,230,467 are owned by Simpson Strong-Tie Company, Inc.

    U.S. Patent No. RE39,462 is owned by SlipTrack Systems, Inc.

    U.S. Patent No. 5,836,133 is owned by B&D Industries, Inc.

    U.S. Patent No. 6,705,056 is owned by Daniel W. Tollenaar.

    TrademarksDietrich Metal Framing and Dietrich are trade names, trademarksand service marks of Dietrich Industries, Inc.

    TRADEREADY, SPAZZER, FAST CLIP, EASYCLIP, FAST TOP,FAST STRUT, UNI-CLIP, DOUBLETRACK, THIS BUCKET COULDSAVE YOUR BUTT!, ONE CALL CAN DO IT ALLSM, THE PLACETO STOP BEFORE THE BUILDING STARTSSM, SPAZZER andDesign, BEST VALUE and Design, YOUR BEST VALUE,DIETRICH CLIP EXPRESSSM, DIETRICH CLIP EXPRESS andDesignSM, BAR GUARD, B-SERIES, BP-SERIES, C-SERIES,CA-SERIES, CS-SERIES, CHN-SERIES, DT-SERIES,DTN-SERIES, E-SERIES, FC-SERIES, M400-SERIES,OT-SERIES, QC-SERIES, S-SERIES, TD-SERIES, TR-SERIES,TS-SERIES, U-SERIES, X-SERIES, ZF-SERIES, EVERYTHINGYOU NEED, WHEN YOU NEED IT, HOW YOU NEED IT AND WHERE...YOU NEED ITSM, HDS Header System are owned by DietrichIndustries, Inc.

    ULTRA-SPAN is a registered trademark of Aegis Metal Framing LLC

    QUICKCLIP is a registered trademark of B & D Industries.

    DANBACK is a trademark of Daniel W. Tollenaar

    GRABBER and are registered trademarks of GRABBER SUPERDRIVE John Wagner Associates, Inc.

    LOX DRIVE is a registered trademark of JJCT Enterprises, Inc.

    SIMPSON and are trademarks of SIMPSON STRONG-TIE Simpson Strong-Tie Company, Inc.

    SLP-TRK is a registered trademark of Sliptrack Systems, Inc.

    UL and UL and Design are trademarks of Underwriter's Laboratories, Inc.

    TAPCON is a registered trademark of Illinois Tool Works, Inc.

    2007 Dietrich Industries, Inc. All rights reserved. Printed in U.S.A.

    WARNING: Handling of this productwithout the proper use of hand and eyeprotection may result in injury.

    081016 DMF Catalog 1-17.qxd:Pgs 1-17 6/24/10 3:34 PM Page 11

  • dietrich metalframing com

    the CLIP EXPRESSSMdifference

    More productsmore optionsand more value with fast,accurate and reliable service at economical prices. Its whatyou expect from a leaderits what you get from Dietrich ClipExpress.SM

    12

    Single SourcingOne company provides the entire light-gaugeframing package from design to delivery.

    Industrys WidestProduct SelectionThe industrys widest selection of framingconnectors and clips for deflection, rigid, floor,roof, truss, header, shear wall and specialtyconnections.

    Engineered ProductsWhen you design or specify by Dietrich productname or number you get fully engineered andrigorously tested connectors. Eliminate anychance that inferior or untested job shop or jobsite modified connectors or clips are beingused.

    Lowest Installed CostMany of our products are specifically designedto achieve or provide lowest cost installationalternatives. Based on the design requirements and installation proceduresthese products provide significant installedsavings.

    Superior QualityZero defects is our goal. You get the samehigh quality, consistent, precision-formedproducts each and every time. Your and ourreputation depend on it.

    EVERYTHING you need, when you need it,

    081016 DMF Catalog 1-17.qxd:Pgs 1-17 6/24/10 3:34 PM Page 12

  • 13

    System Responsibility and Limited LiabilityWhen you specify, design or build with the entire line of Dietrich framingand connection products, you are using engineered systems by one company and one material source. Eliminate multiple liability concerns byusing tested, approved and reliable engineered systems.

    Fast DeliveryWe ship most orders the same day they are received. You choose theshipping option from standard ground service to overnight express. Wellget it there when, how and where you want it.

    National Distribution40+ manufacturing and service locations in North America with facilitiesin or near most major metropolitan cities servicing all 50 states andCanada. Dietrich is the acknowledged leader when it comes to supportingthe supply requirements of large national and multi-national customers.

    Labor Saving SolutionsMany of our connectors were developed by or in conjunction with framinginstallers in order to develop and deliver the lowest installed cost, highestperformance products.

    Expert Technical SupportThe finest light gauge technical assistance and support in the world. From shopdrawings, to design assistance, we respond to over 30,000 calls per year.

    Extensively Tested Products & AssembliesOur products have been rigorously and extensively tested under the AmericanIron and Steel Institutes specifications to ensure product performance.

    Peace-of-MindThats what youll get when you design, engineer or build with the entireline of Dietrich Metal Framing products, connectors, clips, supports andhangers. Youll have peace-of-mind knowing the entire framing system isbacked by the largest light gauge framing and light gauge engineeringcompany in the world.

    New Product DevelopmentWe continually develop and introduce countless new products, systemsand services to meet the expanding needs of the construction industry.We continually focus on developing products that keep costs down andproductivity up.

    Product & TrainingOur field representatives are recognized as experts in the industry. Theyprovide comprehensive product, installation and sales training.

    LEED CertificationDietrich Metal Framing can significantly contribute towards achievingLEED credits in several areas including 4.1 and 4.2.

    *LEED is a registered trademark of the Green Building Council.

    You Get What You Pay for

    You can always find someone with a cheaperprice. But no one will offer a lower overall costand better value. We go far beyond supplyingproducts. No matter where you are in the supply chain, Dietrich will streamline thedesign, procurement and building processwhile improving reliability, quality, productivityand your bottom line.

    how you need it and where

    YOU NEED IT.SM

    081016 DMF Catalog 1-17.qxd:Pgs 1-17 6/24/10 3:34 PM Page 13

  • AEC supportand SERVICES

    Dietrich offers unparalleled support, training, education andproject assistance to design, engineering and building profes-sionals. We have the products, systems, services and compa-nies that can help you drive cost out of the building process.

    Architects and Specifiers CEU On-Site and On-Line Learning Technical Assistance LEED* Accredited Professionals On-Line Specifications, Certifications and Code-Body Approval Reports Integrated Light-Gauge Framing Systems National and World-Wide Availability Design/Build Support and Assistance Extensive Light-Gauge CAD Library Prefabricated and Turnkey Light-Gauge Building Systems

    Engineering and Design Professionals Broadest Product Selection for Cost Effective Design and Building Boxed-Lunch Learning Sessions Certified/Sealed Shop Drawing

    in all 50 States

    Extensive Light-Gauge CAD Library

    Design Build Assistance Advanced Light-Gauge Framing

    Technologies

    Contractors and Builders On-Site Product Demonstrations Certified/Sealed Shop Drawing

    in all 50 States and Canada

    Technical Support On-Line Submittal Builder Products and Services that Reduce Costs

    and Improve Productivity

    * LEED is a trademark of the Green Building Council.14

    HOPSON SP

    ECIALTY S

    YSTEMS

    DRYWALL C

    ONSTRUCT

    ION

    ACOUSTICA

    L CEILING

    S LATHIN

    G AND PLA

    STERING

    SPRAYED

    FIREPROO

    FING DE

    MOUNTAB

    LE PARTITI

    ONS

    SOUND CO

    NTROL E

    XTERIOR I

    NSULATION

    FINISH SY

    STEMS IN

    SULATION

    RELATED M

    ATERIALS

    February

    5, 2004

    Re: A de

    served t

    estimoni

    al

    Dietrich

    Design

    Group

    1414 Fie

    ld Stree

    t

    Building

    C

    Suite 1

    Hammond,

    Indiana

    46320

    Attentio

    n: Mr Mi

    chael C.

    Kerner,

    Manager

    of Tech

    nical Se

    rvices

    Dear Mik

    e,

    Our rela

    tionship

    with Di

    etrich s

    pans man

    y years.

    This is

    our twe

    nty-fift

    h year a

    nd throu

    ghout

    our hist

    ory, we

    can say

    with all

    candor

    that Die

    trich De

    sign Gro

    up has b

    een a si

    lent par

    tner in

    aiding u

    s to att

    ain a st

    rong pre

    sence in

    the col

    d-formed

    metal f

    raming s

    ector of

    the mar

    ket

    which we

    serve.

    We have

    said in

    the past

    and con

    tinue to

    believe

    that

    our destin

    y, indee

    d

    Dietrich

    Industr

    ies, Inc

    .?s dest

    iny too, r

    ests squ

    arely on

    the sho

    ulders o

    f Dietri

    ch Desig

    n Group,

    since me

    tal fram

    ing cont

    inues to

    be the

    product

    of choic

    e in the

    commerc

    ial cons

    truction

    market a

    nd conti

    nues to

    develop

    a presen

    ce in th

    e light

    commerci

    al as we

    ll as th

    e reside

    ntial

    sector.

    ignGrou

    p elevat

    es metal

    framing

    from be

    ing just

    another

    commodi

    ty item

    essen

    -

    through

    its well

    -staffed

    , well-e

    ducated,

    dedicat

    ed and c

    ommitted

    enginee

    r

    -

    is the

    ftenthan

    not, on

    e speaks

    with a

    REAL per

    sonand

    for

    is neces

    sary, hu

    man foll

    ow-up AL

    WAYS occ

    urs.

    dramatic

    ally; it

    is rare

    that a

    week

    ious mem

    bers of

    your

    with DDG

    .

    081016 DMF Catalog 1-17.qxd:Pgs 1-17 6/24/10 3:34 PM Page 14

  • 15

    TECHNICAL assistance& SUPPORTSpecialized Services forSpecialized Needs

    FREE Preliminary DesignDietrich Design Group provides unparalleled customer support through our free preliminary designservice. Customers can e-mail or fax building cross-sections, or can express mail full-size projectplans and specifications. This valuable design service provides the critical information that can helpcustomers during the bidding process.

    FREE Technical Support HotlineWe respond to more than 30,000 calls each year through our Technical Support Hotline. This uniqueand value-added service provides immediate response to engineers, architects, contractors andbuilders, ranging from general questions to detailed specification interpretations.

    Certified Shop DrawingsThrough our in-house engineering staff,Dietrich Design Group provides certified shopdrawings and calculations. This service providesour customers with the most detailed, easy-to-use drawings, and the most cost-effectiveframing solutions in the industry. From multi-story load-bearing structures to curtainwallconstruction, no matter how big or small thejob, DDG is there to help. Our lead-times andfees are among the best available.

    The DietrichAdvantageDietrich Metal Framing is the industry leader insteel-framing products for the residential andcommercial markets. Dietrich Design Groupsupports these products through engineeringand technical expertise and superior customerservice. Together, customers have a one-stopresource for completing projects on time andwithin budgetall backed by safe, reliableand trusted products and technical expertise.

    Technical Assistanceand Support

    Dietrich Design Group (DDG) is the largestlight-gauge framing engineering company inthe country. DDG is licensed in all 50 statesand Canada, and can supply technical assis-tance, design assistance and shop drawingsfor projects built anywhere in the world.

    For fast, prompt assistance call, fax or mail your questions or design needs to the appropriate DDG location.

    Dietrich Design Group (North) 1414 Field Street, Building C, Suite 1Hammond, IN 463201-800-873-2443 or 219-853-9474 phone219-932-4141 fax

    Dietrich Design Group (West) 2262 Rutherford Road,Suite 104Carlsbad, CA 920081-800-873-2443760-931-0465 phone760-931-9824 fax

    Dietrich Design Group (South) 330 Greenwood PlaceMcDonough, GA 302531-800-873-2443 or 678-304-5525 phone678-304-5556 fax

    081016 DMF Catalog 1-17.qxd:Pgs 1-17 6/24/10 3:34 PM Page 15

  • dietrich metalframing com

    one CALLcan do it ALL

    ShippingNeed it fast we ship 95% of in-stock orderswithin 48 hours.

    OrderingPhone, fax, e-mail or EDI you decide.

    ServiceFar more than order takers, Dietrich CustomerCare Representatives are experts in the industry.Let us put our knowledge to work for you.

    SupportHave questions? We have the answers. Call, faxor e-mail us and we will answer your questionspromptly.

    ProductsWe have over 3,000 different products/productcombinations. The largest selection of products inthe industry. One call that truly does it all.

    CustomWhen off-the-shelf just wont do, call Dietrich.We can custom fabricate and provide made-to-order products to meet your needs.

    16

    E-BusinessWe make it easy for you to do business. Fast,flexible options to make you more efficient,reduce procurement and administrative costsand improve productivity.

    EDI Electronic Data Interchange Flexible invoicing by mail, fax, e-mail

    or EDI

    Easy payment options by check, wiretransfer or credit card

    Dietrich is committed to ongoing developmentof technologies and e-business solutions tolower procurement costs.

    SM

    081016 DMF Catalog 1-17.qxd:Pgs 1-17 6/24/10 3:34 PM Page 16

  • 17

    CUSTOMER careConvenient OrderingWith just one call, you can reach the expert sales and support team for prices, availability, ordering, technical support or additional information on our over 3,000 products.

    At Dietrich, our Customer Care Representatives are ready to help you with all your needs. Ourskilled, knowledgeable staff utilizes a sophisticated order entry system to ensure customer ordersand inquiries are handled quickly and accurately.

    We Get It Right the First TimeThe clip order you placed on Monday with another company arrives on Thursday and you find outits wrong. What a mess. Now you have to deal with that very upset contractor waiting for the material, not to mention all the paperwork, phone calls and hassles that go along with a wrongorder. Maybe next time youll turn to Dietrich. We get it right the first time.

    Starting with the order process, our Customer Care Representatives double and triple check eachand every order. Next, we send you a faxed confirmation to verify the correct size, gauge, length,piece count and price.

    Using state-of-the-art manufacturing technologies and automated production control, your order ismanufactured to exact specifications. Every step of the way numerous quality control checks aremade to ensure the highest product quality and integrity. When your order is completed and readyfor transit, each unit is automatically reconciled against the pick list using detailed bar code tracking. The truck cannot be released until the order completely reconciles. Its no wonder Dietrichhas one of the best fill-rates in the business.

    Can Do AttitudeIf there is a way, we go the extra mile to find it and do it. We know the success of your business depends on our ability to get it when you want it, how you want it and where you want it.No one works harder to exceed your expectations.

    Your Business Is Built on ServiceThats why our Customer Care Representatives are dedicated to immediate and quick response. If we cant answer your inquiry immediately, we will within 60 minutes. Its our commitment to you.

    CustomerCare

    Its all about taking care of you. We get it. Weunderstand that you are the lifeblood of ourbusiness. Our world revolves around you.Thats why we do everything in our power to make sure you experience world-class customer care each and every time.

    081016 DMF Catalog 1-17.qxd:Pgs 1-17 6/24/10 3:34 PM Page 17

  • 123

    4

    4

    5

    8

    9

    18

    Large Standoff Conditions

    Medium Standoff Conditions

    Minimal or NoStandoff Conditions

    7

    6

    081016 DMF Catalog 18-39.qxd:Pgs 18-39 6/24/10 3:31 PM Page 18

  • 19

    1 Fast Top Clip

    pages 20-21

    5 FastClip

    Slide Clippages 30-31

    7 Fast Strut

    pages 34-35

    2 Spazzer 9200 Spacing Bar

    pages 22-23

    3 Spazzer 5400 Spacing Bar

    pages 24-25

    4 Slotted SLP-TRKpages 26-29

    6 Extended FastClip

    Slide Clippages 32-33

    8 QuickClip

    pages 36-37

    9 Slide Clippages 38-39

    081016 DMF Catalog 18-39.qxd:Pgs 18-39 6/24/10 3:31 PM Page 19

  • 20

    Vertical deflection up to 2-1/2 (1-1/4 up and 1-1/4 down).

    FastClip slip technology. Available in 3-1/4

    and 4-3/4 widths.

    Positively attached. Eliminates friction-held and temporary fastening.

    Attaches within the wall cavity. FastClip deflection screws provide frictionless

    deflection connections.

    Embossed fastening patterns to ensureaccurate placement of fasteners.

    dietrich metalframing com The place to stopbefore the building starts! SMrequest a quote online @

    Dietrich Fast Top Clips are used in head-of-wall deflectionconditions for in-fill curtain wall assemblies to provide forvertical movement. These clips are used in place of or incombination with deflection track. They also make apositive attachment and do not require bridging installedcontinuously throughout the upper most punchouts. TheFast Top clip connectors can be attached to the undersideof structural members, concrete decks or floorassemblies. Studs must be cut less than fullheight to enable vertical movement up to 2-1/2" (1-1/4" up and down). Fast Top Clipsinstall quickly with welds, screws or poweractuated fasteners. FastClip deflectionscrews are used to attach the clip to thecold-formed framing and to ensurefrictionless deflection. These clips are alsoembossed with fastening patterns to ensureaccurate placement of fasteners.

    Alternative ProductsSLP-TRK Slotted Slip Track, Spazzer 9200, Spazzer 5400Fast Strut

    DMF Thickness Size Weight/Piece Packaging*Product Gauge Mils Design Thickness Inches mm lbs kg Pcs/Code Inches mm BoxFTC3 14 68 0.0713 1.811 1-1/2 x 4 x 3-1/4 38.1 x 102 x 82.6 0.410 0.186 25FTC5 14 68 0.0713 1.811 1-1/2 x 4 x 4-3/4 38.1 x 102 x 120 0.610 0.277 30

    *FTC3 Includes 55 FastClip deflection screws per box.

    *FTC5 Includes 110 FastClip deflection screws per box.

    Sizing and Packaging Fast Top Clip (FTC3 and FTC5)

    Product Dimensions1-1/2" x 4" x 3-1/4" (38.1mm x 102mm x 82.6mm)1-1/2" x 4" x 4-3/4" (38.1mm x 102mm x 120mm)

    Material SpecificationsGauge: 14 gauge (68 mils)Design Thickness: 0.0713 inches (1.811 mm)Coating: G90 (Z275) hot dipped galvanized Yield Strength: Mill-certified SS Grade 50 ksi (340 MPa)ASTM: A 653/ A 653M

    InstallationConnections to the building can be made with screws,powder-actuated fasteners, drill-in concrete anchors orwelding. Mechanical fasteners shall be equally spaced alongthe scored line of the 1.5" flange. When using the tabulatedallowable loads indicated in the table on the followingpage, connections to the building structure must be madeaccording to the table notes. FastClip deflection screwsare used to attach the clip to the cold-formed steel framing.Screws shall be driven through the slotted holes andpositioned to allow for the appropriate building deflection.Three FastClip deflection screws are required with theFTC5 and two FastClip deflection screws are requiredwith the FTC3. U.S. Patent No. 6, 688, 069

    4"3-1/4"

    4"

    1-1/2"

    1-1/2"

    Fast Top Clips are used in head-of-walldeflection conditions for exterior curtain wall and interior, nonload-bearing walls.

    4-3/4"

    FTC5

    FTC3

    Fast

    Top

    C

    lip (

    FTC

    3/FT

    C5)

    081016 DMF Catalog 18-39.qxd:Pgs 18-39 6/24/10 3:32 PM Page 20

  • 21

    FTC3 and FTC5 Table Notes

    FTC3 Clip Allowable Loads (lbs)Welded Mechanically Anchored

    Stud Thickness Slip Direct to Number PAF in PAF in 1/4" xand Yield Strength Allowance Structural of Steel Steel #12-24 1-3/4"

    (Inches) Steel Anchors (FS=5) (FS=10) Screws Kwik-Cons

    20 ga. 0.75259 2 259 252 259 245

    (33 mil)259 3 259 259 259

    33 ksi 1.25259 2 259 219 259 209259 3 259 241 259

    18 ga. 0.75471 2 471 252 471 245

    (43 mil)471 3 471 286 471

    33 ksi 1.25471 2 437 219 471 209471 3 471 241 471

    16 ga. 0.75551 2 504 252 551 245

    (54 mil)551 3 551 286 551

    33 ksi 1.25551 2 437 219 551 209551 3 482 241 551

    FTC5 Clip Allowable Loads (lbs)Welded Mechanically Anchored

    Stud Thickness Slip Direct to Number PAF in PAF in 1/4" xand Yield Strength Allowance Structural of Steel Steel #12-24 1-3/4"

    (Inches) Steel Anchors (FS=5) (FS=10) Screws Kwik-Cons386 2 386 317 386 386

    20 ga. 0.75 386 3 386 386 386 386(33 mil) 386 4 386 386 386 33 ksi 386 2 386 286 386 386

    1.25 386 3 386 338 386 386386 4 386 371 386 505 2 505 317 505 477

    18 ga. 0.75 505 3 505 389 505 473(43 mil) 505 4 505 440 505 33 ksi 505 2 505 286 505 417

    1.25 505 3 505 338 505 404505 4 505 371 505 638 2 634 317 638 477

    16 ga. 0.75 638 3 638 389 638 473(54 mil) 638 4 638 440 638 33 ksi 638 2 571 286 638 417

    1.25 638 3 638 338 638 404638 4 638 371 638 1061 2 634 317 853 477

    16 ga.0.75 1061 3 779 389 1061 473

    (54 mil)1061 4 879 440 1061

    50 ksi1061 2 571 286 791 417

    1.25 1061 3 676 338 969 4041061 4 742 371 1061

    Available for Overnight Delivery, call 866-638-1908

    1) For the FTC3, tabulated values for welds are based on3.25" of weld along each edge of the 1.5" clip leg.2) For the FTC3, tabulated values for the Hilti* PAF's andBuildex screws are based on the following: the outermostanchors are placed 1/2"(min.) away from the clip edge and/orbearing edge, anchors are spaced at 2.25" (min) when usingtwo anchors, and 1-1/8" (min) when using three anchors.3) For the FTC3, tabulated values for Hilti* Kwik-Cons arebased on the following: anchors are spaced at 2.25" o/c (min.),anchors are placed 3/4" (min.) away from edge of buildingstructure and 1/2" (min.) away from edge of the Fast Top Clip.The tabulated values are based on 3000 psi concrete.4) For the FTC5, tabulated values for welds are based on 4.5"of weld along each edge of the 1.5" clip leg. 5) For the FTC5, tabulated values for the Hilti* PAF's andBuildex** screws are based on the following: the outermostanchors are placed 1/2"(min.) away from the clip edge and/orbearing edge, anchors are spaced at 3-3/4" (min) when usingtwo anchors, 1-7/8" (min) when using three anchors, and 1-1/4" when using 4 anchors.

    6) For the FTC5, tabulated values for Hilti* Kwik-Cons arebased on the following: anchors are spaced at 3-3/4" (min.)when using 2 anchors, and 1-7/8" when using 3 anchors,anchors are placed 3/4" (min.) away from edge of buildingstructure and 1/2" (min.) away from edge of the Fast Top Clip.The tabulated values are based on 3000 psi concrete. 7) The values given for PAF's are based on Hilti* X-EDNI0.145" Dia. powder actuated fasteners with 15 mm washersin 3/16" steel.8) #12-24 screws shall have an ultimate shear capacity noless than 2100 lb..9) It is the responsibility of the design professional to detailthe project drawings for proper clip attachment.10) Contact Dietrich Design Group at 1-800-873-2443 fortechnical assistance.

    * Hilti is a registered trademark of Hilti Aktiengeseilschaft Corporation.

    ** Buildex is a registered trademark of Illinois Tool Works, Inc.

    Typical Construction Details

    dietrich metalframing comto view or download construction details in .dwg, .dxf, and .pdf formats.

    Visit our CAD Library at

    Head of Wall

    FTC3

    FTC3

    FTC5

    FTC5

    Fast Top

    Clip (FTC

    3/FTC5)

    081016 DMF Catalog 18-39.qxd:Pgs 18-39 6/24/10 3:32 PM Page 21

  • 22

    Eliminates high material cost of custom-madehead tracks.

    Requires only a single generic long leg trackto provide deflection.

    Eliminates temporary fastening. Facilitates sprayable intumescent/elastomeric

    firestops.

    Eliminates stud spacing layout at deck. Improves drywall hanging since bow is

    removed from tall studs.

    Automatically positions and rigidly holds studson 16" or 24" centers without fasteners in thehead track.

    Use with 3" long leg track for 2" deflection (1" deflection up or down).

    dietrich metalframing com The place to stopbefore the building starts! SMrequest a quote online @

    Material SpecificationsGauge: 20 gauge (33 mils)Design Thickness: 0.0346 inches (0.879mm)Coating: G40 (Z120) hot-dipped galvanized or equivalentcorrosion resistance.Yield Strength: 33 ksi (230 MPa)ASTM: A 653/A 653M

    InstallationInstall long leg track and metal studs, utilizing Spazzer

    Bars to position and rigidly hold studs without fasteners inthe head track. The Spazzer 9200 Bars are passed throughthe upper stud knockouts (must be within 12" of the headtrack) and rotated 90 to position, engaging each side ofthe knockout. Spazzer Bars should not be spaced morethan 5'-0" on center and should not be used with studswider than 6".

    U.S. Patent No. 5, 784, 850 and 6, 021, 618

    Dietrich Spazzer 9200 is a prenotched, 20-gauge,galvanized steel spacer bar engineered to handle deflectionat the head track of interior, nonload-bearing,nonstructural stud walls. The prenotched slots andgripping power of the 50-inch bar holds studs into a rigid,accurately laid out gridwork that has excellent resistance tostud rotation and displacement. The Spazzer 9200 spacerbar saves time and material by eliminating the cost ofcustom head tracks and the time required to fasten andremove screws or layout stud spacing at the deck. Hangingdrywall is also faster and easier because the Spazzer 9200spacer bar eliminates the bow that often occurs in tallinterior studs.

    Alternative ProductsSLP-TRK Slotted Slip Track, Spazzer 5400, Fast Top Clip

    Product Dimensions7/8" by 7/8" by 50" long (22.2mm x 22.2mm x 1270mm)prenotched for 16" and 24" centers.

    Long LegTrack

    Spazzer 9200

    50"

    7/8"7/8"The Spazzer 9200 Spacing Barin conjunction with long legtrack provides a rapidlyinstalled, prenotched,prespaced interiordeflection systemthat saves time andeliminates materials.

    Long

    Leg

    (D

    efle

    ctio

    n) T

    rack

    (TR

    -Ser

    ies

    ) w

    ith S

    pazz

    er

    9200

    Bar

    (SP

    ZD)

    081016 DMF Catalog 18-39.qxd:Pgs 18-39 6/24/10 3:32 PM Page 22

  • 23Available for Overnight Delivery, call 866-638-1908

    Typical Construction Details

    dietrich metalframing comto view or download construction details in .dwg, .dxf, and .pdf formats.

    Visit our CAD Library at

    Head of Wall

    DMF SSMA Thickness Size* Weight PackagingProduct Reference Gauge Mils Design Thickness Inches mm lbs/ft kg/m Pcs/ Pcs/Code Inches mm Bundle SkidTRND 362T200-18

    25 18 0.0188 0.4783-5/8 92.1 0.470 0.699 NA 100

    2" Leg 600T200-18 6 152.4 0.617 0.915 NA 72TRED 362T200-30

    20 30 0.0312 0.7923-5/8 92.1 0.777 1.154 NA 100

    2" Leg 600T200-30 6 152.4 1.019 1.512 NA 72TRNF 362T300-18

    25 18 0.0188 0.4783-5/8 92.1 0.594 0.882 NA 100

    3" Leg 600T300-18 6 152.4 0.740 1.102 NA 72TREF 362T300-30

    20 30 0.0312 0.7923-5/8 92.1 0.981 1.460 NA 100

    3" Leg 600T300-30 6 152.4 1.223 1.820 NA 72*Custom sizes available on request.

    Long Leg (Deflection) Track (TR-Series)

    DMF SSMA Thickness Size Weight/Piece PackagingProduct Reference Gauge Mils Design Thickness Inches mm lbs kg Pcs/ Pcs/Code Inches mm Bundle Skid

    SPZD NA 20 33 0.0346 0.8797/8 x 7/8 22.2 x 22.2

    1.00 0.452 NA 1350x 50 x 1270

    Spazzer 9200 (SPZD)

    Long Leg (Deflection) Track (TR-Series

    ) with Spazzer

    9200 Bar (SPZD)

    081016 DMF Catalog 18-39.qxd:Pgs 18-39 6/24/10 3:32 PM Page 23

  • 24

    Vertical deflection up to 1-1/2" (3/4" up and 3/4" down) when using 2" long leg track.

    Greater deflection can be achieved byincreasing length of long leg track andreducing stud height.

    Eliminates high material cost of custom-madehead tracks.

    Requires only a single generic long leg trackto provide deflection.

    Facilitates sprayable intumescent/elastomericfirestops.

    Eliminates stud spacing layout at deck. Automatically positions and holds studs rigidly

    on 12", 16" or 24" spacing.

    dietrich metalframing com The place to stopbefore the building starts! SMrequest a quote online @

    The TradeReady Spazzer 5400 prenotched, 16-gauge,galvanized steel spacer and bridging bar is engineered tofacilitate the rapid erection of exterior deflection wallframing. Before the Spazzer 5400 Bridging Bar, deflectionat the head track was addressed with a variety of systemsincluding double track, proprietary tracks, deep leg trackwith cold rolled channel, clip angles or welds, solid blocksand metal strap across the face of the studs or by fasteningthe studs to the top track and removing the screws prior toinstalling the wall sheathing.

    The prenotched slots and gripping power of the 50-inchSpazzer 5400 bridging bar assembles steel studs into arigid, accurate gridwork that allows for deflection andprovides excellent resistance to stud rotation anddisplacement without the use of mechanical attachmentsand welding equipment. The Spazzer Bar Guardretaining clip, Spazzer Snap-in Grommet, or screws, mustbe installed in curtain-wall and axial load-bearing wallapplications to prevent the Spazzer 5400 bridging barfrom accidentally being disengaged.U.S. Patent No. 6, 708, 460 and other Patents Pending

    Alternative ProductsSLP-TRK Slotted Slip Track, Fast Top Clip, Spazzer 9200 Spacing Bar with Long Leg Track

    The Spazzer 5400 Spacing Barin conjunction with long legtrack provides a rapidlyinstalled curtain-walldeflection assembly.

    Product Dimensions1-1/4" x 1-1/4" x 50" long (31.8mm x 31.8mm x 1270mm),prenotched for 12", 16" and 24" O.C. spacing.

    Material SpecificationsGauge: 16 gauge (54 mils)Design Thickness: 0.0566 inches (1.438mm)Coating: G60 (Z180) hot-dipped galvanized or equivalentcorrosion resistance.Yield Strength: 50 ksi (340 MPa)ASTM: A 653/A 653M

    InstallationInstall long leg track and metal studs without fasteningstuds to the top track. Install spazzer bars through the topknockout to rigidly hold studs in place. The Spazzer 5400Bars are passed through the upper stud knockouts (must be within 12" of the long leg track) and rotated 90degrees into position, engaging each side of the knockout.When 20-gauge studs are used, the Spazzer Bar Guard,Spazzer Snap-in Grommet or screws are required to keepthe bar in place in curtain wall applications when 18-gaugeor heavier studs are used, no additional fastening isrequired except for load-bearing applications. Spazzer Barsshould not be spaced more than 5' 0" O. C. horizontallyand should not be used with studs wider that 8"*.

    *When bridging 8" wall studs the allowable moment capacity calculated in accordance with Section C3.1.2.1 of the North American Specification for theDesign of Cold-Formed Steel Structural Members should be factored by 0.9 for U-Channel, and 0.8 for Spazzer 5400. Contact Dietrich Design Group at 1-800-873-2443 for additional clarification if needed.

    Spazzer

    Bar Guard

    3-1/4"

    1-1/2"

    Spaz

    zer

    5400

    (SP

    ZS)

    Spaz

    zer

    Snap

    -In G

    rom

    met

    (SP

    GR)

    and

    Spa

    zzer

    Ba

    r G

    uard

    (S

    PBG

    )

    50"

    1-1/4" 1-1/4"

    Spazzer

    5400Spazzer

    Snap-inGrommet

    081016 DMF Catalog 18-39.qxd:Pgs 18-39 6/24/10 3:32 PM Page 24

  • 25Available for Overnight Delivery, call 866-638-1908

    Typical Construction Details

    dietrich metalframing comto view or download construction details in .dwg, .dxf, and .pdf formats.

    Visit our CAD Library at

    Head of Wall

    DMF Thickness Size Weight/Piece PackagingProduct Gauge Mils Design Thickness Inches mm lbs kg Pcs/ Pcs/Code Inches mm Bundle SkidSPZS 16 54 0.0566 1.438 1-1/4 x 1-1/4 x 50 31.8 x 31.8 x 1270 2.060 0.932 NA 680

    Spazzer 5400 (SPZS)

    DMF Size Weight/Pc PackagingProduct Inches mm lbs kg Pcs/Code BoxSPBG 3-1/4 x 1-5/8 82.6 x 41.3 0.05 0.02 100SPGR 1-1/2 x 4 38.1 x 101.6 0.06 0.03 100

    Spazzer Bar Guard (SPBG) & Spazzer Snap-in Grommet (SPGR)

    Spazzer Bar Guard

    Spazzer 5400

    Spazzer 5400 (SPZS) Spazzer

    Snap-In Grom

    met (SPG

    R) and Spazzer Bar G

    uard

    (SPBG)

    081016 DMF Catalog 18-39.qxd:Pgs 18-39 6/24/10 3:32 PM Page 25

  • 26 dietrich metalframing com The place to stopbefore the building starts! SMrequest a quote online @

    SLP-

    TRK

    Slot

    ted

    Trac

    k (B

    DTK

    )

    Positive attachment that allows up to 1" of verticalmovement

    UL ***approved 1- and 2-hour systems Meets ICC, BOCA, SBCCI, ASTM, UL2079 and UBC

    building codes and standards

    Single track assembly Custom leg and slot sizes up to 4" (101.6mm) for

    larger deflection requirements

    Its a real challenge these days meeting head-of-wall codesfor fire stop and life safety issues while maintaining theability to absorb vertical movement in low-, mid- and high-rise buildings. SLP-TRK* slotted track is the solution.SLP-TRK slotted track provides a positive attachment foroverall strength and allows for vertical movement causedby normal head-of-wall and floor extension orcompression. SLP-TRK slotted track smoothly integrateswith a variety of wall installation systems and is extremelyuser-friendly as well as economical. The simple design andeasy installation reduces the cost of materials and labor.And the installer can use the head-of wall systems heprefers to work with. SLP-TRK slotted track systems

    comply with the toughest code requirements in thecountry, if not the world. It has been tested

    with a variety of leading fire-stopproducts and has outperformed the

    requirements of stringent fireand hose stream testing ofASTM E 119 and ASTM E814. SLP-TRK SlottedTrack has also met andexceeded the latest seismiccycling standards found inUL 2079 and ASTM E 1966.

    SLP-TRK

    The SLP-TRK Slotted Track is one of the most cost-effective,positively attached fire-rated deflection systems.

    1/4"

    2-1/2"

    1-1/2"

    1"1"

    Vertical slots on 1" centersallow for complete flexibilityof stud installation.

    W

    * SLP-TRK is a registered trademark of SlipTrack Systems, Inc.;** Tapcon is a registered trademark of Illinois Tool Works Inc.;*** UL and UL Classified are trademarks of Underwriters Laboratories, Inc.

    Alternative ProductsSpazzer 9200, Spazzer 5400, Fast Top Clip

    Product Dimensions2-1/2" x W x 2-1/2" (63.5mm x W x 63.5mm)W available in 2-1/2", 3-5/8", 4", 6" and 8" widths(63.5mm, 92.1mm, 102mm, 152mm and 203mm)

    Material SpecificationsGauge: 25 gauge (18 mils)Design Thickness: 0.0188 inches (0.478mm)Gauge: 20 gauge (33 mils)Design Thickness: 0.0346 inches (0.879mm)Coating: G40 (Z120) hot-dipped galvanized coating orequivalent corrosion resistance.Yield Strength: 33 ksi (230 MPa)ASTM: A 653/A 653 M, C 645, C 754, E 1966

    Gauge: 18 gauge, (43 mils)Design Thickness: 0.0451 inches (1.146mm)Coating: G60 (Z180) hot-dipped galvanized coating orequivalent corrosion resistance.Yield Strength: 33 ksi (230 MPa)ASTM: A 653/A 653 M, C 955, C 1007, E 1966

    Gauge: 16 gauge (54 mils)Design Thickness: 0.0566 inches (1.438mm)Gauge: 14 gauge (68 mils)Design Thickness: 0.0713 inches (1.811mm)Coating: G60 (Z180) hot-dipped galvanized coating orequivalent corrosion resistance.Yield Strength: Mill-certified SS Grade 50 ksi (340 MPa)ASTM: A 653/ A 653M, C 955, C 1007, E 1966

    081016 DMF Catalog 18-39.qxd:Pgs 18-39 6/24/10 3:32 PM Page 26

  • 27Available for Overnight Delivery, call 866-638-1908

    Head of Wall

    Code ApprovalsThe SLP-TRK slotted track has achieved or meets the followingbuilding code approvals and requirements: ICBO ESR 1042 UL Classified R19236 UL Certified for Canada XHL17 LA City RR25344 OSHPD R#0371 NY City MEA 285-01-M National Build Code of Canada.

    InstallationInstall slotted track at the head of wall. Secure studs toslotted top track with #8 wafer-head screws. Be sure tosecure the studs to the track by screwing through the trackslots for a positive connection. Maintain a minimumdeflection gap of 5/8" (16.5mm) between top of stud andtop of slotted track. For fire-rated construction joints, usingthe approved system, install the drywall and other fire-ratedmaterials to the wall and complete the assembly.NOTE: No mixing of approved brand namecomponents in the assembly is allowed.

    DMF Thickness Size*** Weight PackagingProduct Gauge Mils Design Thickness Inches mm lbs/ft kg/m Pcs/ Pcs/Code Inches mm Bundle Skid

    2-1/2 63.5 0.484 0.718 1123-5/8 92.1 0.556 0.826 100

    BDTK 25 18 0.0188 0.478 4 101.6 0.580 0.859 906 152.4 0.708 1.050 608 203.2 0.836 1.240 50

    2-1/2 63.5 0.882 1.309 1123-5/8 92.1 1.015 1.505 100

    BDTK 20 33 0.0346 0.879 4 101.6 1.059 1.571 906 152.4 1.294 1.922 608 203.2 1.529 2.270 50

    2-1/2 63.5 1.150 1.706 1123-5/8 92.1 1.323 1.965 100

    BDTK 18 43 0.0451 1.146 4 101.6 1.380 2.047 N/A 906 152.4 1.687 2.503 608 203.2 1.993 2.959 50

    2-1/2 63.5 1.443 2.142 1123-5/8 92.1 1.660 2.463 100

    BDTK 16 54 0.0566 1.438 4 101.6 1.732 2.571 906 152.4 2.117 3.142 608 203.2 2.502 3.713 50

    2-1/2 63.5 1.818 2.699 1123-5/8 92.1 2.091 3.103 100

    BDTK 14 68 0.0713 1.811 4 101.6 2.182 3.237 906 152.4 2.667 3.959 608 203.2 3.152 4.677 50

    * SLP-TRK is a registered trademark of SlipTrack Systems, Inc. ** UL and UL Classified are trademarks of Underwriters Laboratories, Inc.*** Custom sizes available upon request. This product is not delivered via the Dietrich Clip Express Service

    SLP-TRK Slotted Track (BDTK)

    "P = the maximum horizontal force allowed at the top of the stud for all cases. Please note that the seismic load for the weight of the wall itself and equipment attached to the wall is not required to be additive with 5 psfinterior partition wall lateral load (they are separate load cases).

    SLP-TRK Slotted Track Allowable Loads

    Table Notes

    1) Fire-rated assemblies shall comply to UL 2079Test Standard

    2) Load data based on Twining Laboratories LoadTest #95-9080 / 9/11/1995

    3) Sliptrack Systems Slotted Track SLP-TRK

    4) Track is 14, 16, 18 & 20 Gauge5) Fy = 50 ksi for 14 and 16 gauge members;

    Fy = 33 ksi for 18 and 20 gauge members6) SLP-TRK Single Track Systems: A second top

    track is not required7) The connection of the track to the structure is

    a minimum standard. The engineer of recordfor a site-specific project is responsible for thedesign of the connection to the structure.

    8) Minimum 5/8" (16.5mm) space requirementfor deflection

    9) Partition studs at 12", 16", or 24" o/c typically.Studs attached to tracks with #8 x 9/16"wafer head screws

    10) For larger details or CAD downloads visitwww.dietrichmetalframing.com

    11) One- and two-hour fire rated designs aretested perpendicular to the fluted deck per UL-2079 test standard. For various fire-ratedinstallation conditions, referencewww.bradyinnovations.com and obtain site-specific approval from the Project Architectand Building Official having jurisdiction. Submitdata and installation details via the projectsubmittal process prior to field installations.

    Typical Construction Details

    dietrich metalframing comview or download construction details in .dwg, .dxf, and .pdf formats.

    Over 60 SLP-TRK CAD Details Available on

    20 Gauge SLP-TRK 16 Gauge SLP-TRK

    P = 166 lbs P = 314 lbs

    18 Gauge SLP-TRK 14 Gauge SLP-TRK

    P = 196 lbs P = 314+ lbs

    SLP-TRK

    Slotted Track (BD

    TK)

    081016 DMF Catalog 18-39.qxd:Pgs 18-39 6/24/10 3:32 PM Page 27

  • dietrich metalframing com The place to stopbefore the building starts! SMrequest a quote online @28

    System 1 W.R. GraceWHI-495-PSV-1201

    System 2 W.R. GraceWHI-495-PSV-1333

    System 3 IsolatekWHI-495-PSV-1333

    System 4 IsolatekWHI-495-PSV-1334

    System 5 IsolatekWHI-495-PSV-1333

    System 6 W.R. GraceWHI-495-PSV-1338

    SLP-TRK Systems Fire-Rated AssembliesSystem 16 Warnok Hersey/ITS ICBO ESR-1042

    System 7STI

    UL-HW-D-0003UL-HW-D-0034UL-HW-D-0043UL-HW-D-0044UL-HW-D-0054UL-HW-D-0079UL-HW-D-0088UL-HW-D-0099UL-HW-D-0102UL-HW-D-0136UL-HW-D-0137UL-HW-D-0152UL-HW-D-0153UL-HW-D-0194UL-HW-D-0210UL-HW-D-0241UL-HW-D-0242UL-HW-D-0243UL-HW-D-0260UL-HW-D-0363UL-HW-D-0365UL-HW-D-0371

    System 8PFPP

    UL-HW-D-0024UL-HW-D-0025UL-HW-D-0036UL-HW-D-0062UL-HW-D-0063UL-HW-D-0071UL-HW-D-0072UL-HW-D-0073UL-HW-D-0162UL-HW-D-0185UL-HW-D-0191UL-HW-D-0271UL-HW-D-0272UL-HW-D-0263UL-HW-D-0278

    System 93M

    UL-HW-D-0020UL-HW-D-0021UL-HW-D-0029UL-HW-D-0031UL-HW-D-0101UL-HW-D-0111UL-HW-D-0134UL-HW-D-0170UL-HW-D-0173UL-HW-D-0205UL-HW-D-0265

    System 10HILTI

    UL-HW-D-0042UL-HW-D-0045UL-HW-D-0046UL-HW-D-0049UL-HW-D-0076UL-HW-D-0077UL-HW-D-0082UL-HW-D-0083UL-HW-D-0084UL-HW-D-0085UL-HW-D-0087UL-HW-D-0089UL-HW-D-0106UL-HW-D-0154UL-HW-D-0184UL-HW-D-0190UL-HW-D-0218UL-HW-D-0259UL-HW-D-0313UL-HW-D-0321UL-HW-D-0322UL-HW-D-0324

    System 11Johns-ManvilleUL-HW-D-0047UL-HW-D-0048UL-HW-D-0067UL-HW-D-0068UL-HW-D-0069UL-HW-D-0167UL-HW-D-0186UL-HW-D-0193UL-HW-D-0195UL-HW-D-0275UL-HW-D-0277

    System 12Rectorseal

    UL-HW-D-0032UL-HW-D-0033UL-HW-D-0058UL-HW-D-0059UL-HW-D-0104UL-HW-D-0105UL-HW-D-0127UL-HW-D-0128UL-HW-D-0129UL-HW-D-0130UL-HW-D-0179UL-HW-D-0180UL-HW-D-0221UL-HW-D-0222UL-HW-D-0297UL-HW-D-0298

    System 13GRACE-Flamesafe

    UL-HW-D-0107UL-HW-D-0108UL-HW-D-0124UL-HW-D-0144UL-HW-D-0146UL-HW-D-0147UL-HW-D-0148UL-HW-D-0165UL-HW-D-0213UL-HW-D-0217UL-HW-D-0219UL-HW-D-0257UL-HW-D-0299

    System 14EGS Nelson

    UL-HW-D-0223UL-HW-D-0224UL-HW-D-0227UL-HW-D-0228UL-HW-D-0238UL-HW-D-0239UL-HW-D-0283UL-HW-D-0288UL-HW-D-0304UL-HW-D-0305UL-HW-D-0309UL-HW-D-0310

    System 15Tremco

    UL-HW-D-0016UL-HW-D-0091UL-HW-D-0255UL-HW-D-0256UL-HW-D-0291

    System 16JohnWagner Assoc.

    UL-HW-D-0353UL-HW-D-0356UL-HW-D-0357UL-HW-D-0358UL-HW-D-0368UL-HW-D-0370

    System 17A/D Fire Protection

    Systems UL-HW-D-0247UL-HW-D-0249UL-HW-D-0314UL-HW-D-0315UL-HW-D-0316UL-HW-D-0317UL-HW-D-0320

    System 18OSI Sealants Inc.UL-HW-D-0183UL-HW-D-0341

    System 19USG

    UL-HW-D-0160

    = ShaftwallSystem

    Sliptrack SystemSliptrack has been designed to be used with multiple fire-proof materials. Below is a sequence of photographs illustrating atypical installation using chemical fire-resistive sealants (courtesy of Specified Technologies Inc.)

    Mineral wool is placed in the flutedmetal deck after the drywall is installed

    The deflection gap is filled with mineral wool.

    The head-of-wall construction joint issprayed with fire resistive sealant.

    SLP-

    TRK

    Slot

    ted

    Trac

    k (B

    DTK

    )

    081016 DMF Catalog 18-39.qxd:Pgs 18-39 6/24/10 3:32 PM Page 28

  • Available for Overnight Delivery, call 866-638-1908

    Head of Wall

    29

    SLP-TRK

    Slotted Track (BD

    TK)

    081016 DMF Catalog 18-39.qxd:Pgs 18-39 6/24/10 3:32 PM Page 29

  • 30

    Vertical movement up to 3" (1-1/2" up and 1-1/2" down).

    Rapid, one-piece installation. 3-1/2" FastClip permits up to 1" of

    standoff from the primary frame.

    5-1/2" FastClip permits up to 2" ofstandoff from the primary frame.

    FastClip Deflection Screws (included)provide frictionless slip connection.

    Stiffened corners result in superiordesign values.

    Embossed fastening patterns to ensureaccurate placement of fasteners.

    Eliminates shims and scabs.

    dietrich metalframing com The place to stopbefore the building starts! SMrequest a quote online @

    Material SpecificationsGauge: 14 gauge (68 mils)Design Thickness: 0.0713 inches (1.811mm)Coating: G90 (Z275) hot-dipped galvanized coatingYield Strength: Mill-certified SS Grade 50 ksi (340 MPa)ASTM: A 653/A 653M

    InstallationConnections to the building can be made with screws,powder-actuated fasteners or drill-in concrete anchors.Mechanical fasteners shall be located on the embossedmarks given on the scored line of the 1.5" flange. Two orthree FastClip Deflection Screws (based upon clip size)are used to attach the clip to the cold-formed steel framing.Screws shall be driven through the slotted holes andpositioned to allow for the appropriate building deflection.

    Dietrich FastClip Slide Clip deflection clips are used toattach exterior curtain wall studs to the building structureand provide for vertical building movement independent ofthe cold-formed steel framing. A Dietrich FastClip

    deflection clip installs quickly with screws or powder-actuated fasteners, and provides adjustablestandoff to ensure a plumb wall plane. FastClip DeflectionScrews are provided with each clip to ensure friction-freesliding. Each clip is also embossed with fastening patternsto ensure accurate placement of fasteners.

    Alternative ProductsFast Strut, QuickClip, Slide Clip

    Product DimensionsThe 3-1/2" (88.9mm) Fast Clip is 1-1/2" x 3-1/2" x 4-1/2"(38.1mm x 88.9mm x 114.5mm) long.The 5-1/2" (139.7mm) Fast Clip is 1-1/2" x 5-1/2" x 4-1/2"(38.1mm x 139.7mm x 114.5mm) long.

    U.S. Patent No. 6, 688, 069

    FastClip Slide Clips provide forvertical building movement up to3" (76.2mm).

    FastClip (3-1/2")

    FastClip (5-1/2")

    FastClip

    DeflectionScrew

    DMF Thickness Size Weight/Piece Packaging*Product Gauge Mils Design Thickness Inches mm lbs kg Pcs/Code Inches mm Box

    FCSC 14 68 0.0713 1.8111-1/2 x 3-1/2 38.1 x 88.9

    0.550 0.249 25x 4-1/2 x 114.5

    FCSC 14 68 0.0713 1.8111-1/2 x 5-1/2 38.1 x 139.7

    0.636 0.287 25x 4-1/2 x 114.5

    3-1/2" FCSC Includes 55 FastClip deflection screws per box.

    5-1/2" FCSC Includes 80 FastClip deflection screws per box.

    FastClip (FCSC) Deflection Clips

    4-1/2"

    4-1/2"

    5-1/2"

    3-1/2"

    1-1/2"

    1-1/2"

    Fast

    Clip

    (F

    CSC

    )

    081016 DMF Catalog 18-39.qxd:Pgs 18-39 6/24/10 3:32 PM Page 30

  • 31

    Curtain Wall/Bypass

    Location Options with (2) Anchors Location Options with (3) Anchors (4) Anchors

    Location Options with (2) Anchors Location Options with (3) Anchors (4) Anchors

    Available for Overnight Delivery, call 866-638-1908

    FastClip

    (FC

    SC)

    3-1/2" (88.9mm) FastClip Allowable Loads (lbs)Anchor

    Stud No. Allowable

    TypeThickness and Anchors LoadYield Strength to Structure (lb)

    20 ga. (33 mil) 2 587

    33 ksi3 5874 587

    18 ga. (43 mil)2 852

    33 ksi3 8524 852

    Buildex #12-2416 ga. (54 mil)

    2 852Tek 5 Self-Drilling

    50 ksi3 852

    Screws to 3/16" Steel 4 852

    14 ga. (68 mil) 2 852

    50 ksi3 8524 852

    12 ga. (97 mil)2 852

    50 ksi3 8524 852

    20 ga. (33 mil) 2 511

    33 ksi3 5874 587

    18 ga. (43 mil)2 511

    33 ksi3 767

    Hilti 0.145" X-EDNI4 852

    Powder-Actuated 16 ga. (54 mil)2 852

    Fasteners to 50 ksi3 852

    3/16" Steel4 852

    14 ga. (68 mil) 2 852

    50 ksi3 8524 852

    12 ga. (97 mil)2 852

    50 ksi3 8524 852

    5-1/2" (139.7 mm) FastClip Allowable Loads (lbs)Anchor

    Stud No. Allowable

    TypeThickness and Anchors LoadYield Strength to Structure (lb)

    20 ga. (33 mil) 2 689

    33 ksi3 6894 689

    18 ga. (43 mil)2 852

    33 ksi3 8524 852

    Buildex #12-2416 ga. (54 mil)

    2 852Tek 5 Self-Drilling

    50 ksi3 852

    Screws to 3/16" Steel 4 852

    14 ga. (68 mil) 2 852

    50 ksi3 8524 852

    12 ga. (97 mil)2 852

    50 ksi3 8524 852

    20 ga. (33 mil) 2 510

    33 ksi3 6894 689

    18 ga. (43 mil)2 510

    33 ksi3 765

    Hilti 0.1