Upload
others
View
5
Download
0
Embed Size (px)
Citation preview
MIRO
4 MIRO INTRODUCTION
6 SPECIFICATION GUIDE 9 DESK 12 TABLES 13 STORAGE 18 ACCESSORIES
20 FINISH GUIDE
21 MIRO DETAILS
23 MIRO PRICE LIST 24 DESKS 29 WORKSURFACES 34 TABLES 39 STORAGE 45 ACCESSORIES
4 Watson
MIRO INTRODUCTION
Desk Miro desks include eight stand-alone shapes that can be configured individually or combined with other shapes to create a wide range of workstation configurations and sizes. For Specification Guide see page 9.
Underdesk Support Storage Surfaces may also be supported at one or both ends by a variety of storage components to form traditional or perpendicular configurations. For Specification Guide see page 16.
Worksurfaces Combining multiple surfaces with a single shared bridge leg provides a variety of functional options at a cost effective price point. For Specification Guide see page 9.
Miro Conference Tech-Ready Conference Tables are offered in a variety of heights and support a broad range of meeting applications from formal to informal. For Specification Guide see page 12.
Designed with the executive private office in mind, Miro shapes and configurations support both classic and emerging work styles. The crisp lines and elevated design details complement both traditional and contemporary private office and adjacent administration settings.
Miro Catalog 5
Combo Expansive storage towers that combine compartments for supplies as well as filing.
For Specification Guide see page 16.
Underdesk Storage For compact offices, Miro storage provides functional and efficient storage options for the modern worker. For Specification Guide see page 16.
Credenza Beautiful horizontal proportions and useful storage combinations for offices or meeting rooms.
For Specification Guide see page 17.
Wardrobe Compact cabinets equipped with all the hardware for suits and running gear alike. For Specification Guide see page 17.
Overhead Utilize vertical space with Miro Overhead storage, proportioned to match storage or worksurface in horizontal length. For Specification Guide see page 17.
Display Tower Iconic storage units for traditional private office settings, these towers celebrate the detail of the Miro mitered triangle. For Specification Guide see page 17.
6 Watson
MIRO DESK TABLES STORAGE ACCESSORIES
For pricing see page 23.
MDWEG
MTWEG
MDANG
MTANG
MS471MCCREC
MDVIG
MCCREC
MDREC
MTREC
ML550 ML550 MS552CPLTE MS570RISEN
MDVMT MCCREC
MDLPA/MDLPB
MTLPA/MTLPB
MDLSA
MTLSA
MDVER
MTVER
Rectangle
Rectangle
Single Bridge Shared Bridge Connector Plate Storage Riser
Viga Rectangle One Piece
Viga
Two Piece
Wedge
Wedge
Angle
Angle
Console TableThree Piece
Extended Primary Conference End
Extended Primary Conference End
Extended Primary
Extended Primary
Verve
Verve
Statement of Line
Desk
Worksurfaces
Worksurface Support
Tables
Meeting Conference
SPECIFICATION GUIDE
Designed to resonate with a new generation of leaders, Miro results in an unmistakable feeling of longevity and style to meet the highest standards for executive, managerial and collaborative workspaces.
A compelling alternative to traditional veneer products, Miro harnesses the precision and durability of mitered steel with the superior performance of modern laminate technology to create a furniture line that articulates a fresh vision for modern professional work environments.
Miro provides solutions for both fixed and plug-and-go technology. By introducing 28/20 depth logic, Miro helps increase spaciousness in condensed footprints by eliminating excess worksurface depth. Miro components offer configuration flexibility with table lengths and depths designed for use with modular storage elements. Breaking ground with a new aesthetic, Miro storage components are a unique combination of laminate cabinets finished with a veneer of powdercoated steel.
Miro Catalog 7
MIRO DESK TABLES STORAGE ACCESSORIES
MAWBD
MS505 MS506 MS501MS502
MCAWBD
MS503 MS567
MAGRM
MS509
MS417
MS601 MS602 MS603 MS604
MS411
MS418
MS414
MS431 MS442MS422 MS421
MACTR
Miro Whiteboard
8-12 4-4-12 4-8-1212-12
Miro Conference Whiteboard
Two Door Single Door
Grommet
Open
Short Doors
Door
4-12
Tall Doors
8-12
Open Door12-12 4-8-12
Cable Tower
Storage
Accessories
Underdesk
Credenza
Overhead
Display Tower WardrobeCombo
Privacy Screens
8 Watson
MIRO TABLES STORAGE ACCESSORIES
For pricing see page 24.
DESK
For Finish Options see page
RectangleVigaWedge
RectangleVigaWedge
Angle
Verve
Extended Primary Extended Primary Conference End
How to Specify: Miro Desk Miro provides a complete, easily specified desk with extensive surface shapes from rectangles to large corners. The worksurface floats above a geometric base formed by Miro’s iconic leg, a triangular steel tube mitered at the corners.
A
A
A
A
A
C
D
B
B
D
C
B
B
B
1. Dimensions Miro desks include eight stand-alone shapes that can be configured individually or combined with other shapes to create a wide range of workstation configurations and sizes.
2. Finishes
3. Optional Grommets For Grommet Locations, see page 10.
Laminate Powder
Edge Stain
Miro Catalog 9
MIRO TABLES STORAGE ACCESSORIESDESK
Desk
28/20 Depth Logic
28" 20"
24"
24"
30" 24"
Storage Clearance The bottom height of the rail is 26¼" and will accommodate 23" storage, with or without casters.
Viga Designed to maximize the visibility of the Miro base, the Viga configuration is always rectangular in shape and positions the rail along the longer, user and visitor sides of the table.
Bridge Leg The standard steel leg base configuration for all Miro tables is a bridge-style support positioned at the narrow ends (or end when combined with storage support) of the table.
Miro shapes were created based upon thourough study of today's work styles, technology support requirements, and personal tastes. Most tables in the Miro offering are dimensioned at 28" and/or 20" depths, rather than traditional 30" and 24" depths. This 28/20 dimensional logic capitalizes on shrinking technology to provide more free space within the workstation footprint.
10 Watson
MIRO TABLES STORAGE ACCESSORIESDESK
Grommet Locations
All grommets are two-piece diecast with a sivler finish and sized at 77mm in diameter. Grommet(s) "G" are an additional $100 per surface.
For alternate grommet locations MAGRM grommets may be ordered separately. Contact your porject coordinator for more information.
One Grommet 45" - 60" Rectangle/Wedge Desk Viga Square Desk Viga Meeting Table 54" - 60" Corners Angle Desk
Two Grommets 66"+ Rectangle/Wedge Desk Viga Rectangle 66"+ Corners Verve
Angle
Verve
Viga Rectangle and 66"+ Rectangle
45"-60" Rectangle
Extended Primary Extended Corner
Viga Square Viga Meeting Table
66"+ Wedge
45"-60" Wedge
54"-60" Extended Primary 54"-60" Ext Primary Conference End
5"
5"
A/2
A/2
5"
19½” 19½” 19½”19½”
19½” 19½” 19½”
19½” 19½”
19½”
19½”
19½”
19½”
Miro Catalog 11
MIRO DESK STORAGE ACCESSORIESTABLES
For Finishes see page 20.
Miro Conference tables are supported by a single spanning miro leg with intermittent interior supports for multiple surface tables. All wood grain laminates are grain matched from surface to surface.
60"
54"
48"
42"
36"
30"
24"
Width 24" - 288"
1. Surface Dimensions Choose Depth and Width.
2. Base Dimensions Choose Height.
3. Power Each separate surface shape can be specified with a drop-in power module. For options, see page 12.
4. Finishes
How to Specify: Miro Conference Tables
One-Piece 24"D x 24-72"W
42”
29½"
17"
One-Piece 24-60"D x 24-96"WTwo-Piece 48-60"D x 108-192"W
Three-Piece 48-60"D x 216-288"W
One-Piece 30-60"D x 30-96"W
Laminate Powder
Edge Stain
12 Watson
MIRO DESK STORAGE ACCESSORIES
For pricing see page 34.
TABLES
Tables
Conference Table Power
Miro offers a modern, sustainable, and tech-ready line of meeting tables to bring the look and feel of the boardroom into team and project rooms.
Power for Miro Conference Tables is specified per surface. Units are centered on each surface. Options include a simple grommet or power and data drop-in modules.
Grommet Drop-in 60mm grommets are available on any Miro table. (G) +$50
Small Drop-in, Plug Option Most tables have the option of a small drop-in (2 power receptacles and 1 data port). Tables longer than Miro feet have two drop-ins. (Silver/White M21PSW) +$722 (Silver/Black M21PSB) +$722 Chicago (Silver/Black M21CSB) +$722
Large Drop-in, Plug Option Large tables have the option of a large drop-in (5 power receptacles and 3 data ports). Tables longer than Miro feet have two drop-ins. (Silver/White E53PSW) +$722 (Silver/Black E53PSB) +$722 Chicago (Silver/Black E53CSB) +$722
Large Drop-in, Hardwire Option Large drop-ins are also available in a hardwire option. Hardwired drop-ins can be daisy-chained together so that only one drop to the floor is required. (Silver/White E53HSW) +$722 (Silver/Black E53HSB) +$722
Data Face Plates
AA Systimax/CommScope
AA Uniprise/CommScope
BB L-Com Keystone Modular
BB Tyco Sl, and 100 Connect Series Modular Jacks
BB Siemon Keystone Style
BB Allen Tel Versa Tap Series
BB Levitron Quick Port Series
BB Nordx Keystone Style
CC Tyco SL Coupler Series
CC Krone 6000 Series/ADC
CC Hubbell Xcelerator Keystone Series
DD Blank
EE Ortonics TracJack Series
FF Panduit Mini-Com Series
GG Microphone Jack/3-pin XLR, solder type
HH Video Monitor Jack/DB-15, panel mount solder
Miro Catalog 13
MIRO DESK TABLES ACCESSORIESSTORAGE
Storage
Metal Veneer
Many items that won’t fit easily in a traditional 6 inch drawer — water bottles, lunch boxes, running shoes, purses, etc. — typically end up in a file drawer. 4-8-12 sizing creates more usable capacity by providing an 8 inch drawer that comfortably accommodates these items, preserving the file drawer for filing.
This sizing logic also creates a 4 inch top drawer that better accommodates items like staplers, calculators, business cards, and other small office supplies. To preserve the ‘top drawer’ function expected in standard storage, pencil trays are included with 15 inch wide pedestals.
Miro height logic is referenced by drawer configuration: 4-8-12 and 12-12 units (traditionally Pencil/Box/File and File/File) are 28 inches tall. Units with 4-4-12 and 8-12 configurations are 23 inches tall (25 inches with casters), and will fit beneath Viga tables.
The signature feature of Miro storage is the unique combination of wood cabinets finished with powdercoated steel veneer. This fusion of materials exemplifies Watson’s commitment to innovative design and using environmentally preferred materials.
The steel veneer removes the visual impact of traditional plastic edge banding and creates a ‘shadow box’ effect that frames crisp design details.
High PressureLaminate
Thermally FusedLaminate
Metal Veneer
12-12 4-8-128-12
14 Watson
MIRO DESK TABLES ACCESSORIES
For pricing see page 39.
STORAGE
Storage Support
AV Option
Miro tables can be supported using a base alone or by the use of a cabinet and riser block. An expansive array of configuration options are now possible to meet functional requirements and aesthetic preferences.
Electronic presentation equipment is easily accessible from the front, while the credenza back is open for cable access and maximum ventilation.
In-Line Support Storage support cabinets can be arranged to fit directly below the desktop or they can be configured to extend 15", 18" or 21" inches beyond the end of the desk (30" wide units only). This extension provides additional worksurface space for piling and filing and adds architectural interest to the space.
Single Door Support Cabinet Miro Single Door cabinets accommodate printers and other non-CPU devices that do not require heavy ventilation beneath the desk - keeping technology within easy reach. By facilitating 90° office configurations, the Single Door cabinet allows storage to be used as a worksurface return. A touch-latch door eliminates interference. Single Door cabinets include dual grommets for wire management, a adjustable shelf to accommodate large items, and dedicated space for power strips and excess wiring. Peripherals Cabinet is not intended for CPU storage. The Single Door cabinet is configured to open at a perpendicular angle beneath the worksurface. These cabinets feature grommets and wire management cavities and provide excellent concealed storage for printers or other technology. A touch-latch replaces the cabinet handle providing better leg clearance. 28" and 36" deep surfaces overhang perpendicular storage support by 8".
Note — The open back allows for appropriate technology ventilation and easy access for cable and technology installation.
Miro Catalog 15
MIRO DESK TABLES ACCESSORIESSTORAGE
Locks
One Lock Two Locks
Credenza Credenza
Overhead
Wardrobe Combo
Underdesk
Storage locks can be specified one of three ways, non-locking “N,” factory installed “F,” or field installed “U.”
The non-locking “N” option keeps drawer and door faces clear when locks are not required. “F” locks are keyed randomly and installed by our factory. Field installed “U” locks are ordered separately and keyed alike upon installation in the field. A special order is required for lock cores numbered higher than 150.
Lock Placement Locks are placed above vertical handles on doored units; exceptions include combos, wardrobes, and overheads. Lock placement on drawer units vary; see diagram below.
“U” Field Installed Locks
COLOR PART NUMBER KEY NUMBER
SILVER 480043 LP 100-150
16 Watson
MIRO DESK TABLES ACCESSORIES
For pricing see page 39.
STORAGE
Underdesk
Combo
Available with or without casters, Miro Underdesk components increase storage density by making good use of space, especially within compact or shared spaces. Mobile units are especially useful when shared resources require ready access and transient docking.
Available in four heights, Combos are 20 inches deep and 30 inches wide. The Combo utilizes 4-8-12 or 12-12 sizing logic to provide comprehensive and multi-purpose drawer and shelf storage.
15” W
12-12
30" W 30" W
30" W
30" W
30" W
30" W
30” W
4-8-12
28”26”
75”
62”
50"
Miro Catalog 17
MIRO DESK TABLES ACCESSORIESSTORAGE
Credenza
Overhead
WardrobeDisplay Tower
Featuring signature Miro steel veneer faces, the credenzas’ narrow surface and spacious drawer bodies provide design and space value for the private office and adjacent administrative spaces. All Miro credenzas are 20 inches deep and are available in 24 inch and 28 inch heights.
The Miro Overhead provides symmetry and visual balance for the private office. The Overhead may be mounted at traditional overhead height or at the belt-line. Outer-edge, doored storage is 13" high to fit binders. Open shelves at the center of the 45 inch and 75 inch units allow additional open-access to support materials or display items.
The Miro Wardrobe is a cross-functional storage pieces that supports both formal and casual wear storage. Wardrobes ship with coat rods to keep clothing wrinkle free, and an interior hook for jackets, purses and backpacks. At 15" wide, the Miro wardrobe is available in three heights.
The Miro Display Tower offers contemporary style accented by Miro’s signature powdercoated metal veneer drawer faces. The metal shelves are sized to accommodate personal items and large binders but may be removed, making room for taller display items.
Short Doors
Tall Doors 8-12
4-12
30” W 45” W 60” W 75” W
15" W 15" W
15" W 15" W
15" W 15" W
24”
28”
14”
75”
62”
50"
75”
62”
50"
18 Watson
MIRO DESK TABLES STORAGE
For pricing see page 45.
ACCESSORIES
Accessories
Seiri Screen
Cable Tower Designed to provide seamless wire management, the Conference Cable Tower conceals power, voice, and data wiring within its hollow interior. Constructed of powdercoated steel and attached to the surface with sturdy connection brackets, a keyslot panel provides easy access to the cabling within.
Named for the Japanese term for “sorting” or “arranging,” Seiri Screens provide open plan configurations with elegant space delineation and seated privacy. Seiri Screens come in two height dimensions, providing distinct levels of space division. These tackable screens are covered in 100% recycled and recyclable fabric and ship with magnetic bins for organizing desktop items within the screen’s bottom tray.
Each screen ships with 4 steel bins per side. Bins work independently or in pairs to accommodate a array of documents and small desk items. Each bin fits snugly into the screen’s steel tray and is held firm by a magnet.
Seiri Screens are bracketed to desk edges and can only be mounted along edges without legs.
The tower has two frosted acrylic sides joined with steel corners.
Laminate interior for additional plug strip attachment, using
wood screws.
Alligator clips for wire management.
The tower attaches to the surface with two connection brackets. Brackets
offer a 4.5" adjustment range.
Removable face for cable access.
29” H
15” W
6” D
Miro Catalog 19
Grain Direction
The grain direction for Rectangles, Wedges, and Angles runs the length of the tables. For Extended Primary shapes, the grain runs the direction of the longer of two wings. Verve tables are comprised of two separate wings joined at a 45° diagonal; grains run along the length of both wings and are not matched at the joint.
Note — Verves with woodgrain laminates are not grain matched.
Note — On 60"W units, side-by-side door or drawer faces will not grain match horizontally.
Note — Vertical Faces are grain matched.
Laminate Powder
20 Watson
Miro Pull — The geometric nature of the Miro handle complements the horizontal lines of the product, while maintaining a quiet interaction with the overall design of the Miro line.
FINISH GUIDE
Standar
d
Smar
tgra
in*
LAMINATE
* Smartgrain (+$125)
Charcoal Stain Edge Option There is a $50 charge for Charcoal Stain edges. The charge reflects the extra materials and labor costs associated with the application of Charcoal stain.
Clear Powdercoat Option When clear powdercoat is specified, an additional 10% will be added to the base price of each desk or accessory ordered. Clear coat powder is for those seeking a less manufactured appearance and as such welds and weld heat bluing are visible. Surface grind and scratch marks will also show through the clear coating.
White Markerboard Laminate Option When white markerboard laminate is specified, an additional $125 will be added to the base price of each surface.
Black BK
Charcoal CH
Dark Champagne M2
Fashion Grey FQ
Frosty White FJ
Satin Gray GY
Slate SG
White Aluminum WA
Miro
Meta
l
EDGE STAIN
POWDERSolid
Charcoal CH
Natural ZE
Frosty White FJ -
Desert Zephyr DZ -
Gilded Mesh TJ -
Grey Mesh EG -
Misted Zephyr EZ -
Shadow Zephyr ZA -
Sheer Mesh EE -
Steel Mesh EK -
Twilight Zephyr IZ -
White Markerboard WM -
Asian Night JN A1
Asian Sand JS A2
Biltmore Cherry IB B8
Blond Echo EH C5
Colombian Walnut LQ -
Ebony EB -
Fine Sycamore FE -
Kensington Maple KM -
Kona KN -
Madagascar ZD DA
Monticello Maple MM QI
Natural Cane N2 -
Rio IJ RI
River Cherry RV -
Studio Teak DT TX
Tendu TU -
Tuscan Walnut TW -
Williamsburg Cherry JL W1
Xanadu DO X1
Text
ile
FABRICP.E.T.
Anchorage
Ash 2V
Smoke 7K
Charcoal 2I
Amber 9B
Angora 9A
Asteroid 6D
Birch 9H
Cumin 9U
Fossil 6X
Goose 9E
Graphite 9R
Green Apple 1G
Henna 6H
Miro Catalog 21
MIRO DETAILS
Tables Storage
available for all shapes. All grommets are two-piece die cast with a silver finish and sized at 77mm in diameter.
Edges The Miro edge is shaped by a custom profiled CNC cutting head that exposes the MDF substrate. The profile is hand finished with water-based clear coat or stain.
Dimensioning Actual Miro worksurface dimensions (length & width) are ½" shorter than stated.
Worksurface & Base Design Miro tables are shaped from double-refined, medium density fiberboard and finished with high pressure, commercial-grade laminates. The edges of the 1¼" surface are profiled with a sweeping chamfer into which bases are recessed. The thin, exposed profile and floating effect creates visual lightness atop the robust, steel foundation. The angular geometric Miro base is formed from 14 gauge, triangular steel tube elegantly mitered at the corners and fixed to the worksurface using concealed steel brackets.
Cases Storage components are made from
wood and steel. Cases are constructed from ¾", 45 lb., industrial particleboard, thermally fused with low pressure laminates on the two faces of each board. Case veneers are powdercoated, 22 gauge (.03") thick formed sheet steel. Wall-mounted overhead storage ships with continuous aluminum french rail cleats for wall attachment.
Drawers and Doors Drawer bodies are constructed of powdercoated, 16 gauge metal sides. The bottom and backs are made of ½" TFL, 45 lb. industrial particleboard. Drawer slides have full extension, 100 lb. ball bearing slides (200 lb. on lateral files). Doors feature fully concealed, self closing Euro hinges with three axis adjustment. Door and drawer faces are ¾", ultra-blend board with high pressure laminate on both faces.
Locks When specified, locks secure all drawers and doors; exceptions include 4" drawers on MS7023041, MS4311550, MS4311562, and MS4311575. Locks are keyed randomly.
Anti-tip Storage units with file drawers and lateral files are counterbalanced as required. Lateral file drawers feature an anti-tip, interlocking drawer slide that allows only one lateral drawer to open at a time. Tall Wardrobes include a strapping kit to secure to walls.
Pedestal Casters Four non-locking, swivel 165 lb., BIFMA tested, casters allow the unit to be pushed sideways through narrow doorways with stability. Casters raise the height of pedestals by 2".
Miro Pull A die cut aluminum satin chrome handle designed in Italy. A 156 mm long version is used on 15" wide faces, while a longer, 192 mm version is used on 30" wide faces and tall doors.
Miro Leg Tube The triangular Miro Leg tube is .083" thick, induction welded, cold rolled steel, mill-formed on a progressive die line from coiled 14 gauge sheet steel.
Miro Bridge Legs Miro Bridge legs are formed from tube that is CNC miter cut and TIG welded at twin 45° joints. Two identical brake-formed, 12 gauge, cold rolled sheet steel brackets use a channel structure for rigidity.
Miro Single Legs Miro single legs (used at the corners of Verve tables) are made from triangular Miro tube. The mounting plate is formed from 12 gauge, cold rolled sheet steel that is perimeter MIG welded from the top, hiding the weld for cleaner appearance and a stronger seam.
Miro Foot The cast aluminum Miro foot is mechanically secured to the Miro leg tube. A 5/16-18 leveling glide is threaded into the foot for a maximum 1" height adjustment. A octagonal head is molded into the glide to allow for in-position leveling.
Materials Miro worksurfaces are approximately 1¼" thick and are composed of synthetic laminate and backing material bonded to a 1⅛" MDF (medium density fiberboard) board. The MDF is double refined for strength and a uniform finish. Worksurfaces that have open spans in excess of 42" include heavy gauge steel reinforcement tube to reduce deflection.
Metal-to-Metal Connections Legs are fastened to desk surfaces with ¼-20 machine screws threaded into brass inserts at multiple locations for unlimited disassembly and reassembly.
Grommets Factory installed grommets are
MIRO PRICE LIST
24 Desks Rectangle Viga Rectangle Viga Square Wedge Angle Extended Primary Extended Primary Conference End Verve
29 Worksurfaces Rectangle Surface Wedge Surface Angle Surface Extended Primary Surface Extended Primary Conference End Surface Verve Surface
33 Surface Support Bridge Base Shared Bridge Base Connector Plate Storage Riser
34 Tables Viga Meeting Table One-Piece Conference Two-Piece Conference Three-Piece Conference Console Table
39 Storage Underdesk Combo Display Tower Wardrobe Credenza Overhead
45 Accessories
24 Watson
For Finishes see page 20.
MIRO WORKSURFACES TABLES STORAGE ACCESSORIES
For Specification Guide see page 9.
DESKS
A B MODEL NUMBER PRICE WEIGHT
20 45 MDREC2045 1113 55
20 48 MDREC2048 1113 59
20 54 MDREC2054 1336 66
20 60 MDREC2060 1336 73
20 66 MDREC2066 1336 81
20 72 MDREC2072 1336 88
20 75 MDREC2075 1670 92
20 78 MDREC2078 1670 95
20 84 MDREC2084 1781 103
28 48 MDREC2848 1169 82
28 54 MDREC2854 1392 92
28 60 MDREC2860 1392 103
28 66 MDREC2866 1392 113
28 72 MDREC2872 1392 123
28 75 MDREC2875 1726 133
28 78 MDREC2878 1726 133
28 84 MDREC2884 1837 144
36 60 MDREC3660 1726 132
36 66 MDREC3666 1726 145
36 72 MDREC3672 1726 158
36 75 MDREC3675 2060 171
36 78 MDREC3678 2060 171
36 84 MDREC3684 2171 184
28 60 MDVIG2860 2115 99
28 66 MDVIG2866 2115 109
28 72 MDVIG2872 2115 118
28 78 MDVIG2878 2449 128
28 84 MDVIG2884 2560 138
36 72 MDVIG3672 2449 152
36 78 MDVIG3678 2782 165
36 84 MDVIG3684 2894 177
Laminate Powder
Edge Stain
Note — 28"H Miro Underdesk storage will not fit under Viga table rails. 23"H Miro Underdesk storage (with or without casters) is sized to fit under Viga table rails. Grommet(s) "G" +$100 per surface. For placement see page 10.
Viga Rectangle
Rectangle
Desks
B
A
B
A
Miro Catalog 25
For Finishes see page 20.
MIRO WORKSURFACES TABLES STORAGE ACCESSORIESDESKS
A B MODEL NUMBER PRICE WEIGHT
36 36 MDVIG3636 1615 76
42 42 MDVIG4242 1837 104
48 48 MDVIG4848 2060 135
20 54 MDWEG2054 1392 73
20 60 MDWEG2060 1392 81
20 66 MDWEG2066 1392 89
20 72 MDWEG2072 1392 97
20 78 MDWEG2078 1726 105
20 84 MDWEG2084 1837 113
28 54 MDWEG2854 1726 102
28 60 MDWEG2860 1726 113
28 66 MDWEG2866 1726 124
28 72 MDWEG2872 1726 136
28 78 MDWEG2878 2060 147
28 84 MDWEG2884 2171 158
28 90 MDANG2890 2560 135
Laminate Powder
Edge Stain
Note — Grommet(s) "G" +$100 per surface. For placement see page 10.
Code
Stain
HAND EDGELeft L
Right R
Natural $0
Charcoal $50
Right ShownAngle
Viga Square
Desks (continued)
64"
30"
B
40”
37”
A
36”
Right ShownWedge
B
B
A
A
28”
36”
B
A
26 Watson
For Finishes see page 20.
MIRO WORKSURFACES TABLES STORAGE ACCESSORIES
For Specification Guide see page 9.
DESKS
A B MODEL NUMBER PRICE WEIGHT
42 54 MDLSA4254 1837 78
42 60 MDLSA4260 1837 87
42 66 MDLSA4266 1837 95
42 72 MDLSA4272 1837 104
42 78 MDLSA4278 2171 113
42 84 MDLSA4284 2282 121
45 54 MDLSA4554 1892 84
45 60 MDLSA4560 1892 93
45 66 MDLSA4566 1892 102
45 72 MDLSA4572 1892 111
45 78 MDLSA4578 2226 121
45 84 MDLSA4584 2337 130
48 54 MDLSA4854 1948 89
48 60 MDLSA4860 1948 99
48 66 MDLSA4866 1948 109
48 72 MDLSA4872 1948 119
48 78 MDLSA4878 2282 129
48 84 MDLSA4884 2394 139
42 54 MDLPA4254 1837 89
42 60 MDLPA4260 1837 99
42 66 MDLPA4266 1837 109
42 72 MDLPA4272 1837 119
42 78 MDLPA4278 2171 129
42 84 MDLPA4284 2282 139
45 54 MDLPA4554 1892 96
45 60 MDLPA4560 1892 106
45 66 MDLPA4566 1892 117
45 72 MDLPA4572 1892 127
45 78 MDLPA4578 2226 138
45 84 MDLPA4584 2337 149
48 54 MDLPA4854 1948 102
48 60 MDLPA4860 1948 113
48 66 MDLPA4866 1948 125
48 72 MDLPA4872 1948 136
48 78 MDLPA4878 2282 147
48 84 MDLPA4884 2394 158
Laminate Powder
Edge Stain
Note — 20" end of an Extended Primary docks with an Extended Primary Conference End to create a pocket. Grommet(s) "G" +$100 per surface. For placement see page 10.
Right ShownExtended Primary
Desks (continued)
B
20”
A
20”
Right Shown
Extended Primary Conference End
B
20”
A
28”
Miro Catalog 27
For Finishes see page 20.
MIRO WORKSURFACES TABLES STORAGE ACCESSORIESDESKS
A B MODEL NUMBER PRICE WEIGHT
42 54 MDLPB4254 2004 103
42 60 MDLPB4260 2004 115
42 66 MDLPB4266 2004 126
42 72 MDLPB4272 2004 137
42 78 MDLPB4278 2337 149
42 84 MDLPB4284 2449 160
45 54 MDLPB4554 2060 111
45 60 MDLPB4560 2060 123
45 66 MDLPB4566 2060 135
45 72 MDLPB4572 2060 147
45 78 MDLPB4578 2394 159
45 84 MDLPB4584 2505 172
48 54 MDLPB4854 2115 118
48 60 MDLPB4860 2115 131
48 66 MDLPB4866 2115 144
48 72 MDLPB4872 2115 157
48 78 MDLPB4878 2449 170
48 84 MDLPB4884 2560 183
54 54 MDVER5454 2671 89
54 60 MDVER5460 2671 99
54 66 MDVER5466 2671 109
54 72 MDVER5472 2671 118
54 78 MDVER5478 3005 128
54 84 MDVER5484 3116 138
60 54 MDVER6054 2671 99
60 60 MDVER6060 2671 110
60 66 MDVER6066 2671 121
60 72 MDVER6072 2671 132
60 78 MDVER6078 3005 142
60 84 MDVER6084 3116 153
66 54 MDVER6654 2671 109
66 60 MDVER6660 2671 121
66 66 MDVER6666 2671 133
66 72 MDVER6672 2671 145
66 78 MDVER6678 3005 157
66 84 MDVER6684 3116 169
Laminate Powder
Edge Stain
Code
Stain
HAND EDGELeft L
Right R
Natural $0
Charcoal $50
Note — Verve tables are delivered in two pieces and joined diagonally at the center. Verve corners are not grain matched. Grain directions runs lengthwise for each surface. Grommet(s) "G" +$100 per surface. For placement see page 10.
Desks (continued)
B
20”
A
36”
B
C
A
D
28C, 20D ShownVerve
Right Shown
Extended PrimaryConference End (continued)
28 Watson
For Finishes see page 20.
MIRO WORKSURFACES TABLES STORAGE ACCESSORIES
For Specification Guide see page 9.
DESKS
A B MODEL NUMBER PRICE WEIGHT
72 54 MDVER7254 2671 118
72 60 MDVER7260 2671 132
72 66 MDVER7266 2671 145
72 72 MDVER7272 2671 158
72 78 MDVER7278 3005 171
72 84 MDVER7284 3116 184
78 54 MDVER7854 3005 128
78 60 MDVER7860 3005 142
78 66 MDVER7866 3005 157
78 72 MDVER7872 3005 171
78 78 MDVER7878 3116 185
78 84 MDVER7884 3450 199
84 54 MDVER8454 3116 138
84 60 MDVER8460 3116 153
84 66 MDVER8466 3116 169
84 72 MDVER8472 3116 184
84 78 MDVER8478 3450 199
84 84 MDVER8484 3561 215
Laminate Powder
Edge Stain
Note — Verve tables are delivered in two pieces and joined diagonally at the center. Verve corners are not grain matched. Grain directions runs lengthwise. Grommet(s) "G" +$100 per surface. For placement see page 10.
Desks (continued)
B
C
A
D
28C, 20D ShownVerve (continued)
Miro Catalog 29
For Finishes see page 20.
MIRO DESKS TABLES STORAGE ACCESSORIESWORKSURFACES
A B MODEL NUMBER PRICE WEIGHT
20 45 MTREC2045 446 36
20 48 MTREC2048 446 38
20 54 MTREC2054 668 43
20 60 MTREC2060 668 47
20 66 MTREC2066 668 52
20 72 MTREC2072 668 57
20 75 MTREC2075 1002 59
20 78 MTREC2078 1002 62
20 84 MTREC2084 1113 66
28 48 MTREC2848 446 53
28 54 MTREC2854 668 60
28 60 MTREC2860 668 66
28 66 MTREC2866 668 73
28 72 MTREC2872 668 79
28 75 MTREC2875 1002 79
28 78 MTREC2878 1002 86
28 84 MTREC2884 1113 93
36 60 MTREC3660 946 75
36 66 MTREC3666 946 83
36 72 MTREC3672 946 90
36 75 MTREC3675 1280 94
36 78 MTREC3678 1280 99
36 84 MTREC3684 1391 106
20 54 MTWEG2054 696 50
20 60 MTWEG2060 696 56
20 66 MTWEG2066 696 61
20 72 MTWEG2072 696 67
20 78 MTWEG2078 1030 72
20 84 MTWEG2084 1141 78
28 54 MTWEG2854 975 70
28 60 MTWEG2860 975 78
28 66 MTWEG2866 975 85
28 72 MTWEG2872 975 93
28 78 MTWEG2878 1309 101
28 84 MTWEG2884 1420 109
Laminate Powder
Edge Stain
Code
Stain
HAND EDGELeft L
Right R
Natural $0
Charcoal $50
Note — Grommet(s) "G" +$100 per surface. For placement see page 10.
Right Shown
Rectangle Surface
Wedge Surface
Worksurfaces
B
A
B
A28”
B
A36”
30 Watson
For Finishes see page 20.
MIRO DESKS TABLES STORAGE ACCESSORIES
For Specification Guide see page 9.
WORKSURFACES
A B MODEL NUMBER PRICE WEIGHT
28 90 MTANG2890 2199 118
42 54 MTLSA4254 1503 70
42 60 MTLSA4260 1503 78
42 66 MTLSA4266 1503 86
42 72 MTLSA4272 1503 93
42 78 MTLSA4278 1837 101
42 84 MTLSA4284 1948 109
45 54 MTLSA4554 1558 75
45 60 MTLSA4560 1558 83
45 66 MTLSA4566 1558 92
45 72 MTLSA4572 1558 100
45 78 MTLSA4578 1892 108
45 84 MTLSA4584 2004 116
48 54 MTLSA4854 1615 80
48 60 MTLSA4860 1615 89
48 66 MTLSA4866 1615 98
48 72 MTLSA4872 1615 106
48 78 MTLSA4878 1948 115
48 84 MTLSA4884 2060 124
Laminate Powder
Edge Stain
Note — Worksurface ships with one bridge leg. For Extended Primary, leg is located at the “A” dimension. For Angle, leg is on the extension end. 20" end of an Extended Primary docks with an Extended Primary Conference End to create a pocket. Grommet(s) "G" +$100 per surface. For placement see page 10.
Right ShownExtended Primary Surface
Worksurfaces (continued)
Right ShownAngle Surface
B
20”
A
20”
64"
30"
B
40”
37”
A
36”
Miro Catalog 31
For Finishes see page 20.
MIRO DESKS TABLES STORAGE ACCESSORIESWORKSURFACES
A B MODEL NUMBER PRICE WEIGHT
42 54 MTLPA4254 1475 75
42 60 MTLPA4260 1475 83
42 66 MTLPA4266 1475 91
42 72 MTLPA4272 1475 99
42 78 MTLPA4278 1809 108
42 84 MTLPA4284 1920 116
45 54 MTLPA4554 1531 80
45 60 MTLPA4560 1531 89
45 66 MTLPA4566 1531 98
45 72 MTLPA4572 1531 107
45 78 MTLPA4578 1865 115
45 84 MTLPA4584 1976 124
48 54 MTLPA4854 1586 85
48 60 MTLPA4860 1586 95
48 66 MTLPA4866 1586 104
48 72 MTLPA4872 1586 114
48 78 MTLPA4878 1920 123
48 84 MTLPA4884 2032 132
42 54 MTLPB4254 1615 81
42 60 MTLPB4260 1615 89
42 66 MTLPB4266 1615 98
42 72 MTLPB4272 1615 107
42 78 MTLPB4278 1948 116
42 84 MTLPB4284 2060 125
45 54 MTLPB4554 1670 86
45 60 MTLPB4560 1670 96
45 66 MTLPB4566 1670 105
45 72 MTLPB4572 1670 115
45 78 MTLPB4578 2004 124
45 84 MTLPB4584 2115 134
48 54 MTLPB4854 1726 92
48 60 MTLPB4860 1726 102
48 66 MTLPB4866 1726 112
48 72 MTLPB4872 1726 123
48 78 MTLPB4878 2060 133
48 84 MTLPB4884 2171 143
Laminate Powder
Edge Stain
Code
Stain
HAND EDGELeft L
Right R
Natural $0
Charcoal $50
Note — Worksurface ships with one bridge leg at the “A” dimension 20" end of an Extended Primary docks with an Extended Primary Conference End to create a pocket. Grommet(s) "G" +$100 per surface. For placement see page 10.
Right ShownExtended Primary Conference End Surface
Worksurfaces (continued)
B
B
20”
20”
28”
36”
A
A
32 Watson
For Finishes see page 20.
MIRO DESKS TABLES STORAGE ACCESSORIES
For Specification Guide see page 9.
WORKSURFACES
A B MODEL NUMBER PRICE WEIGHT
60 60 MTVER6060 1976 85
60 66 MTVER6066 1976 93
60 72 MTVER6072 1976 101
60 78 MTVER6078 2310 110
60 84 MTVER6084 2422 118
66 60 MTVER6660 1976 93
66 66 MTVER6666 1976 102
66 72 MTVER6672 1976 112
66 78 MTVER6678 2310 121
66 84 MTVER6684 2422 130
72 60 MTVER7260 1976 101
72 66 MTVER7266 1976 112
72 72 MTVER7272 1976 122
72 78 MTVER7278 2310 132
72 84 MTVER7284 2422 142
78 60 MTVER7860 2310 110
78 66 MTVER7866 2310 121
78 72 MTVER7872 2310 132
78 78 MTVER7878 2422 143
78 84 MTVER7884 2755 154
84 60 MTVER8460 2422 118
84 66 MTVER8466 2422 130
84 72 MTVER8472 2422 142
84 78 MTVER8478 2755 154
84 84 MTVER8484 2867 165
Laminate Powder
Edge Stain
Note — Worksurface ships with one corner leg. Verve tables are delivered in two pieces and joined diagonally at the center. Verve corners are not grain matched. Grain directions runs lengthwise. Grommet(s) "G" +$100 per surface. For placement see page 10.
Worksurfaces (continued)
28C, 20D ShownVerve Surface
B
C
A
D
Miro Catalog 33
For Finishes see page 20.
MIRO DESKS TABLES STORAGE ACCESSORIESWORKSURFACES
A B MODEL NUMBER PRICE WEIGHT
20 29 ML5502029 390 15
28 29 ML5502829 390 17
36 29 ML5503629 390 18
40 29 ML5504029 446 21
56 29 ML5505629 502 24
72 29 ML5507229 557 26
MS552CPLTE 85 2
Laminate Powder
Edge Stain
Code
Stain
HAND EDGELeft L
Right R
Natural $0
Charcoal $50
Note — Miro leg depth must match worksurface depth. Miro Shared Bridge Leg is intended for pairing two tables of equal depth. Connecting plate kits are recommended for leg clearance optimization. Field installation only. Connceting Plate comes in a Recovered Pewter finish.
Single Surface
Two Surfaces
Bridge Base
Shared Bridge Base
Connector Plate
Surface Support
34 Watson
For Finishes see page 20.
MIRO DESKS WORKSURFACES STORAGE ACCESSORIES
For Specification Guide see page 12.
TABLES
A B MODEL NUMBER PRICE WEIGHT
48 72 MDVMT48072 3339 143
48 84 MDVMT48084 3673 167
48 96 MDVMT48096 4007 190
24 24 MCCREC2424-17 1602 48
24 30 MCCREC2430-17 1644 58
24 36 MCCREC2436-17 1644 58
24 42 MCCREC2442-17 1687 68
24 48 MCCREC2448-17 1687 68
24 60 MCCREC2460-17 1860 79
24 72 MCCREC2472-17 1902 89
24 24 MCCREC2424-29 1602 48
24 30 MCCREC2430-29 1623 53
24 36 MCCREC2436-29 1644 58
24 42 MCCREC2442-29 1665 63
24 48 MCCREC2448-29 1687 68
24 60 MCCREC2460-29 1860 79
24 72 MCCREC2472-29 1902 89
30 30 MCCREC3030-29 1664 63
30 36 MCCREC3036-29 1665 69
30 42 MCCREC3042-29 1707 76
30 48 MCCREC3048-29 1708 82
30 60 MCCREC3060-29 1935 69
30 72 MCCREC3072-29 1977 107
30 84 MCCREC3084-29 2325 120
Laminate Powder
Edge Stain
Note — When selecting a table, approximately 36-48" of space between the edge of the table and the wall or other furniture is recommended. Power is specified per segment. For details, see page 12.
29"H Conference
17"HOccasional Table
One-Piece
Viga Meeting Table
B
B
B
A
A
A
Tables
Miro Catalog 35
For Finishes see page 20.
MIRO DESKS WORKSURFACES STORAGE ACCESSORIESTABLES
A B MODEL NUMBER PRICE WEIGHT
36 36 MCCREC3636-29 1808 76
36 42 MCCREC3642-29 1849 84
36 48 MCCREC3648-29 1850 91
36 60 MCCREC3660-29 2148 106
36 72 MCCREC3672-29 2244 121
36 84 MCCREC3684-29 2751 136
36 96 MCCREC3696-29 2847 150
42 42 MCCREC4242-29 1926 113
42 48 MCCREC4248-29 1926 113
42 60 MCCREC4260-29 2224 133
42 72 MCCREC4272-29 2320 152
42 84 MCCREC4284-29 2827 172
42 96 MCCREC4296-29 2869 191
48 48 MCCREC4848-29 1926 113
48 60 MCCREC4860-29 2224 133
48 72 MCCREC4872-29 2320 152
48 84 MCCREC4884-29 2827 172
48 96 MCCREC4896-29 2869 191
54 60 MCCREC5460-29 2300 160
54 72 MCCREC5472-29 2343 184
54 84 MCCREC5484-29 2903 208
54 96 MCCREC5496-29 2946 232
60 60 MCCREC6060-29 2300 160
60 72 MCCREC6072-29 2343 184
60 84 MCCREC6084-29 2903 208
60 96 MCCREC6096-29 2946 232
Laminate Powder
Edge Stain
Note — When selecting a table, approximately 36-48" of space between the edge of the table and the wall or other furniture is recommended. Power is specified per segment. For details, see page 12.
Stain
EDGENatural $0
Charcoal $50
Plug
Har
dwire
Chicag
oPOWER+DATA
DROP-IN2 + 1 $722 - $722
5 + 3 $1496 $1774 $1496
Plug 120" Hardwire 180"
Chicago 15"
One Piece (continued)
B
A
Tables (continued)
29"H Conference
36 Watson
For Finishes see page 20.
MIRO DESKS WORKSURFACES STORAGE ACCESSORIES
For Specification Guide see page 12.
TABLES
A B MODEL NUMBER PRICE WEIGHT
30 30 MCCREC3030-42 1664 63
30 36 MCCREC3036-42 1665 69
30 42 MCCREC3042-42 1707 76
30 48 MCCREC3048-42 1708 82
30 60 MCCREC3060-42 1935 94
30 72 MCCREC3072-42 1977 107
30 84 MCCREC3084-42 2325 120
36 36 MCCREC3636-42 1808 76
36 42 MCCREC3642-42 1849 84
36 48 MCCREC3648-42 1850 91
36 60 MCCREC3660-42 2148 106
36 72 MCCREC3672-42 2244 121
36 84 MCCREC3684-42 2751 136
36 96 MCCREC3696-42 2847 150
42 42 MCCREC4242-42 1926 113
42 48 MCCREC4248-42 1926 113
42 60 MCCREC4260-42 2224 133
42 72 MCCREC4272-42 2320 152
42 84 MCCREC4284-42 2827 172
42 96 MCCREC4296-42 2869 191
48 48 MCCREC4848-42 1926 113
48 60 MCCREC4860-42 2224 133
48 72 MCCREC4872-42 2320 152
48 84 MCCREC4884-42 2827 172
48 96 MCCREC4896-42 2869 191
54 60 MCCREC5460-42 2300 160
54 72 MCCREC5472-42 2343 184
54 84 MCCREC5484-42 2903 208
54 96 MCCREC5496-42 2946 232
60 60 MCCREC6060-42 2300 160
60 72 MCCREC6072-42 2343 184
60 84 MCCREC6084-42 2903 208
60 96 MCCREC6096-42 2946 232
Laminate Powder
Edge Stain
Note — When selecting a table, approximately 36-48" of space between the edge of the table and the wall or other furniture is recommended. Power is specified per segment. For details, see page 12.
Tables (continued)
One Piece (continued)
B
A
42"H Standing Height
Miro Catalog 37
For Finishes see page 20.
MIRO DESKS WORKSURFACES STORAGE ACCESSORIESTABLES
A B MODEL NUMBER PRICE WEIGHT
48 108 MCCREC48108-29 6141 300
48 120 MCCREC48120-29 6453 336
48 132 MCCREC48132-29 6713 363
48 144 MCCREC48144-29 6875 391
48 156 MCCREC48156-29 7877 418
48 168 MCCREC48168-29 8669 447
48 180 MCCREC48180-29 8821 474
48 192 MCCREC48192-29 8983 501
54 108 MCCREC54108-29 6288 347
54 120 MCCREC54120-29 6600 388
54 132 MCCREC54132-29 6750 397
54 144 MCCREC54144-29 6916 452
54 156 MCCREC54156-29 8026 506
54 168 MCCREC54168-29 8816 517
54 180 MCCREC54180-29 8970 549
54 192 MCCREC54192-29 9132 581
60 108 MCCREC60108-29 6288 347
60 120 MCCREC60120-29 6600 388
60 132 MCCREC60132-29 6750 397
60 144 MCCREC60144-29 6916 452
60 156 MCCREC60156-29 8026 506
60 168 MCCREC60168-29 8816 517
60 180 MCCREC60180-29 8970 549
60 192 MCCREC60192-29 9132 581
48 168 MCCREC48168-42 8669 447
48 180 MCCREC48180-42 8821 474
48 192 MCCREC48192-42 8983 501
54 168 MCCREC54168-42 8816 517
54 180 MCCREC54180-42 8970 549
54 192 MCCREC54192-42 9132 581
60 168 MCCREC60168-42 8816 517
60 180 MCCREC60180-42 8970 549
60 192 MCCREC60192-42 9132 581
Laminate Powder
Edge Stain
Note — When selecting a table, approximately 36-48" of space between the edge of the table and the wall or other furniture is recommended. Power is specified per segment. For details, see page 12.
Stain
EDGENatural $0
Charcoal $50
Plug
Har
dwire
Chicag
oPOWER+DATA
DROP-IN2 + 1 $722 - $722
5 + 3 $1496 $1774 $1496
Plug 120" Hardwire 180"
Chicago 15"
Tables (continued)
H
Two-Piece
Two-Piece (continued)
B
B
A
A
29"H Conference
42"H Standing Height
38 Watson
For Finishes see page 20.
MIRO DESKS WORKSURFACES STORAGE ACCESSORIES
For Specification Guide see page 12.
TABLES
A B MODEL NUMBER PRICE WEIGHT
48 216 MCCREC48216-29 9415 560
48 240 MCCREC48240-29 10986 633
48 264 MCCREC48264-29 11829 680
48 288 MCCREC48288-29 12677 750
54 216 MCCREC54216-29 9459 648
54 240 MCCREC54240-29 11189 735
54 264 MCCREC54264-29 12035 789
54 288 MCCREC54288-29 12898 868
60 216 MCCREC60216-29 9459 648
60 240 MCCREC60240-29 11189 735
60 264 MCCREC60264-29 12035 789
60 288 MCCREC60288-29 12898 868
48 216 MCCREC48216-42 9415 560
48 240 MCCREC48240-42 10986 633
48 264 MCCREC48264-42 11829 680
48 288 MCCREC48288-42 12677 750
54 216 MCCREC54216-42 9459 648
54 240 MCCREC54240-42 11189 735
54 264 MCCREC54264-42 12035 789
54 288 MCCREC54288-42 12898 868
60 216 MCCREC60216-42 9459 648
60 240 MCCREC60240-42 11189 735
60 264 MCCREC60264-42 12035 789
60 288 MCCREC60288-42 12898 868
20 45 MS4714529 2236 111
20 45 MS4714534 2257 105
Laminate Powder
Edge Stain
Note — When selecting a table, approximately 36-48" of space between the edge of the table and the wall or other furniture is recommended. Power is specified per segment. For details, see page 12. Interior drawer dimensions for Console Tables are 2¼"H x 12"W x 16⅜"D.
Three-Piece
Three Piece (continued)
Console Table
B
B
A
A
W D
H
Tables (continued)
29"H Conference
42"H Standing Height
Miro Catalog 39
For Finishes see page 20.
MIRO DESKS WORKSURFACES TABLES ACCESSORIESSTORAGE
A B C MODEL NUMBER PRICE WEIGHT
20 30 28 MS5092030 1392 86
28 30 28 MS5092830 1558 203
20 30 28 MS5032030 1392 145
28 30 28 MS5032830 1558 203
20 30 28 MS5072030 1481 53
20 15 23 MS5052015 1113 73
28 15 23 MS5052815 1281 102
Laminate Powder
Code
HAND Code
LOCKLeft L
Right R
Factory Installed L
Field Installed U
Non-Locking N
Note — 23"H Underdesk storage (with or without casters) is sized to fit under Viga table rails. 28"H Underdesk storage will not fit under Viga table rails. 20"D Underdesk Support storage can support a 20" or 28"D worksurface. 28"D Underdesk Support storage can support a 28" or 36"D worksurface. Two Door unit ships with one adjustable shelf.
28" Underdesk units may be used for Surface Support using the Storage Riser. For pricing, see page 40.
Two Door
Open
Storage
Underdesk
8-12 Underdesk
Single Door
40 Watson
For Finishes see page 20.
MIRO DESKS WORKSURFACES TABLES ACCESSORIES
For Specification Guide see page 13.
STORAGE
A B C MODEL NUMBER PRICE WEIGHT
20 15 28 MS5022015 1169 73
28 15 28 MS5022815 1336 102
20 30 28 MS5022030 1670 145
28 30 28 MS5022830 1837 203
20 15 23 MS5062015 1281 73
28 15 23 MS5062815 1447 102
20 15 28 MS5012015 1336 73
28 15 28 MS5012815 1503 102
20 30 28 MS5012030 1781 145
28 30 28 MS5012830 1948 203
3 14 1 MS570RISEN 112 3
Laminate Powder
Note — 23"H Underdesk storage (with or without casters) is sized to fit under Viga table rails. 28"H Underdesk storage will not fit under Viga table rails. 20"D Underdesk Support storage can support a 20" or 28"D worksurface. 28"D Underdesk Support storage can support a 28" or 36"D worksurface. A standard plastic pencil tray ships with 15"W storage cabinets with 4" drawers.
Code
HAND Code
LOCKLeft L
Right R
Factory Installed L
Field Installed U
Non-Locking N
Underdesk (continued)
4-4-12 Underdesk
4-8-12 Underdesk
Code
BASEFixed F
Mobile +$20 C
*Casters add 2" to unit height.
12-12 Underdesk
Storage Riser
Miro Catalog 41
For Finishes see page 20.
MIRO DESKS WORKSURFACES TABLES ACCESSORIESSTORAGE
A B C MODEL NUMBER PRICE WEIGHT
20 30 50 MS4223050 2449 180
20 30 62 MS4223062 2671 224
20 30 75 MS4223075 2894 270
20 30 50 MS4213050 2560 180
20 30 62 MS4213062 2782 224
20 30 75 MS4213075 3005 270
20 15 50 MS4311550 2004 106
20 15 62 MS4311562 2226 131
20 15 75 MS4311575 2449 159
20 15 50 MS4421550 1336 97
20 15 62 MS4421562 1558 120
20 15 75 MS4421575 1781 145
Note —
Laminate Powder
Code
HAND Code
LOCKLeft L
Right R
Factory Installed L
Field Installed U
Non-Locking N
Note — 50"H Combo units ship with 1 adjustable shelf. 62"H Combo units ship with 1 fixed + 1 adjustable shelf. 75"H Combo units ship with 1 fixed + 2 adjustable shelves. 50"H Display Tower units ship with 1 removable, fixed shelf. 62"H Display Tower units ship with 2 removable, fixed shelves. 75"H Display Tower units ship with 3 removable, fixed shelves.
Display Tower shelves are metal construction and will always match the case color. 50"H Wardrobe units have no shelves. 62"H Wardrobe units ship with 1 fixed shelf. 75"H Wardrobe units ship with 2 fixed shelves.
62"H Shown
62"H Shown
62"H Shown
62"H Left Shown
12-12 Combo
4-8-12 Combo
Display Tower
Wardrobe
Combo
42 Watson
For Finishes see page 20.
MIRO DESKS WORKSURFACES TABLES ACCESSORIES
For Specification Guide see page 13.
STORAGE
A B C MODEL NUMBER PRICE WEIGHT
20 45 24 MS4174524 2505 130
20 60 24 MS4176024 2727 173
20 75 24 MS4177524 3395 216
20 45 28 MS4184528 2616 152
20 60 28 MS4186028 2839 202
20 75 28 MS4187528 3506 252
Note —
Laminate Powder
Note — Credenzas are not intended for underdesk use or to be placed adjacent to other Miro storage units; heights will not match. Credenzas shown here ship with two adjustable and removable shelves. Metal, open shelves are non-adjustable but may be removed. Interior faces of open shelves will always match case color.
On 60"W units, side-by-side drawer faces will not grain match horizontally.
Short Doors Credenza
Tall Doors Credenza
Credenza
CodeA/V OPTION
Cutout +$75 V
For more info, see page 14.
Miro Catalog 43
For Finishes see page 20.
MIRO DESKS WORKSURFACES TABLES ACCESSORIESSTORAGE
A B C MODEL NUMBER PRICE WEIGHT
20 45 24 MS4114524 2839 183
20 60 24 MS4116024 3172 243
20 75 24 MS4117524 3840 304
20 45 28 MS4144528 2950 183
20 60 28 MS4146028 3284 243
20 75 28 MS4147528 3951 304
Note —
Laminate Powder
Code
HAND Code
LOCKLeft L
Right R
Factory Installed L
Field Installed U
Non-Locking N
Note — Credenzas are not intended for underdesk use or to be placed adjacent to other Miro storage units; heights will not match. Metal, open shelves are non-adjustable but may be removed. Interior faces of open shelves will always match case color. On 60"W units, side-by-side drawer faces will not grain match horizontally.
4-12 Credenza
8-12 Credenza
Credenza (continued)
44 Watson
For Finishes see page 20.
MIRO DESKS WORKSURFACES TABLES ACCESSORIES
For Specification Guide see page 13.
STORAGE
A B C MODEL NUMBER PRICE WEIGHT
14 30 15 MS6013015 1169 52
14 45 15 MS6024515 1726 78
14 60 15 MS6036015 2060 104
14 75 15 MS6047515 2727 129
Note —
Laminate Powder
Note — Overhead shelves will always match the case color. Overhead open shelves are metal construction and are non-adjustable, but are removable. Open shelves may be specified as a contrasting color. Overhead interior is 11¼"D.
On 60"W units, side-by-side drawer faces will not grain match horizontally. Overheads attach to the wall with an aluminum french cleat.
Door
Overhead
Miro Catalog 45
For Finishes see page 20.
MIRO DESKS WORKSURFACES TABLES STORAGE ACCESSORIES
A B MODEL NUMBER PRICE WEIGHT
45 30 MAWBD4530 502 41
45 45 MAWBD4545 668 52
45 60 MAWBD4560 779 65
45 75 MAWBD4575 891 73
45 90 MAWBD4590 1002 91
40 30 MCAWBD4030 557 41
40 45 MCAWBD4045 735 52
40 60 MCAWBD4060 857 65
40 75 MCAWBD4075 980 73
40 90 MCAWBD4090 1102 91
45 30 MCAWBD4530 557 41
45 45 MCAWBD4545 735 52
45 60 MCAWBD4560 857 65
45 75 MCAWBD4575 980 73
45 90 MCAWBD4590 1102 91
6 15 MACTR061529 841 2
Note —
Laminate Powder
Note — Whiteboards mount to the wall with supplied sheet metal cleats. Whiteboard ships with two magnetic Seiri Bins. Proper care and simple weekly maintenance will prolong markerboard life. The brand and color of marker may impact performance
Cable Tower — Consists of 2 acrylic faces attached to powder coated steel sides, 1 acrylic face is attached by magnet for easy access to technology cables. Multiple zip-tie points are included for clean cable management. Ships with 5 zip-ties. Recommended for use on 48" and 60" wide tables. The total footprint is 4"D x 14"W and fits 29"H tables only. Connects to surface with two table connection brackets and wing nuts.
with tray & bins
with magnatic rail
Miro Whiteboard
Miro Conference Whiteboard
Accessories
Miro Conference Cable Tower
W
See Finish Guide for options.
WATSON ACCESSORIES
46 Watson
H W MODEL NUMBER PRICE WEIGHT
13 36 WAPRS1336 641 11
13 42 WAPRS1342 641 13
13 45 WAPRS1345 641 14
13 48 WAPRS1348 641 15
13 54 WAPRS1354 696 17
13 60 WAPRS1360 696 19
13 66 WAPRS1366 724 20
13 72 WAPRS1372 724 22
13 78 WAPRS1378 752 24
13 84 WAPRS1384 752 26
16 36 WAPRS1636 641 14
16 42 WAPRS1642 641 16
16 45 WAPRS1645 641 17
16 48 WAPRS1648 641 18
16 54 WAPRS1654 696 20
16 60 WAPRS1660 696 23
16 66 WAPRS1666 724 25
16 72 WAPRS1672 724 27
16 75 WAPRS1675 724 28
16 78 WAPRS1678 752 29
16 84 WAPRS1684 752 32
19 36 WAPRS1936 641 16
19 42 WAPRS1942 641 19
19 45 WAPRS1945 641 20
19 48 WAPRS1948 641 22
19 54 WAPRS1954 696 24
19 60 WAPRS1960 696 27
19 66 WAPRS1966 724 30
19 72 WAPRS1972 724 32
19 75 WAPRS1975 724 33
19 78 WAPRS1978 752 35
19 84 WAPRS1984 752 37
Fabric Powder
Note — Single Sided Seiri Screen ships with 4 bins. Dual Sided Seiri Screen ships with 8 bins.Desk Mounted Seiri Screens are fully tackable. Seiri Bins fix magnetically to trays.
Single Sided
Privacy
Seiri Screens
W
H
See Finish Guide for options.
WATSON ACCESSORIES
Watson Accessories Catalog 47
H W MODEL NUMBER PRICE WEIGHT
13 36 WAPRN1336 537 11
13 42 WAPRN1342 537 13
13 45 WAPRN1345 537 14
13 48 WAPRN1348 537 15
13 54 WAPRN1354 592 17
13 60 WAPRN1360 592 19
13 66 WAPRN1366 620 20
13 72 WAPRN1372 620 22
13 78 WAPRN1378 648 24
13 84 WAPRN1384 648 26
16 36 WAPRN1636 537 14
16 42 WAPRN1642 537 16
16 45 WAPRN1645 537 17
16 48 WAPRN1648 537 18
16 54 WAPRN1654 592 20
16 60 WAPRN1660 592 23
16 66 WAPRN1666 620 25
16 72 WAPRN1672 620 27
16 75 WAPRN1675 620 28
16 78 WAPRN1678 648 29
16 84 WAPRN1684 648 32
19 36 WAPRN1936 537 16
19 42 WAPRN1942 537 19
19 45 WAPRN1945 537 20
19 48 WAPRN1948 537 22
19 54 WAPRN1954 592 24
19 60 WAPRN1960 592 27
19 66 WAPRN1966 620 30
19 72 WAPRN1972 620 32
19 75 WAPRN1975 620 33
19 78 WAPRN1978 648 35
19 84 WAPRN1984 648 37
Fabric Powder
Note — Desk Mounted Seiri Screens are fully tackable.
Trayless
Seiri Screens (continued)
W
H
See Finish Guide for options.
WATSON ACCESSORIES
48 Watson
H W MODEL NUMBER PRICE WEIGHT
13 36 WAPRD1336 808 14
13 42 WAPRD1342 808 16
13 45 WAPRD1345 808 17
13 48 WAPRD1348 808 18
13 54 WAPRD1354 864 20
13 60 WAPRD1360 864 22
13 66 WAPRD1366 891 25
13 72 WAPRD1372 891 27
13 78 WAPRD1378 919 29
13 84 WAPRD1384 919 31
16 36 WAPRD1636 808 17
16 42 WAPRD1642 808 19
16 45 WAPRD1645 808 21
16 48 WAPRD1648 808 22
16 54 WAPRD1654 864 25
16 60 WAPRD1660 864 28
16 66 WAPRD1666 891 30
16 72 WAPRD1672 891 33
16 75 WAPRD1675 891 34
16 78 WAPRD1678 919 36
16 84 WAPRD1684 919 38
19 36 WAPRD1936 808 20
19 42 WAPRD1942 808 23
19 45 WAPRD1945 808 25
19 48 WAPRD1948 808 26
19 54 WAPRD1954 864 29
19 60 WAPRD1960 864 33
19 66 WAPRD1966 891 36
19 72 WAPRD1972 891 39
19 75 WAPRD1975 891 41
19 78 WAPRD1978 919 42
19 84 WAPRD1984 919 45
Fabric Powder
Note — Dual Sided Seiri Screen ships with 8 bins. Desk Mounted Seiri Screens are fully tackable. Seiri Bins fix magnetically to trays.
Dual Sided
Seiri Screens (continued)
W
H
See Finish Guide for options.
WATSON ACCESSORIES
Watson Accessories Catalog 49
H W MODEL NUMBER PRICE WEIGHT
13 36 WAPRW1336 585 16
13 42 WAPRW1342 585 19
13 45 WAPRW1345 585 20
13 48 WAPRW1348 585 21
13 54 WAPRW1354 641 24
13 60 WAPRW1360 641 26
13 66 WAPRW1366 668 29
13 72 WAPRW1372 668 32
13 78 WAPRW1378 696 34
13 84 WAPRW1384 696 37
16 36 WAPRW1636 585 20
16 42 WAPRW1642 585 23
16 45 WAPRW1645 585 24
16 48 WAPRW1648 585 26
16 54 WAPRW1654 641 29
16 60 WAPRW1660 641 32
16 66 WAPRW1666 668 35
16 72 WAPRW1672 668 39
16 75 WAPRW1675 668 40
16 78 WAPRW1678 696 42
16 84 WAPRW1684 696 45
19 36 WAPRW1936 585 23
19 42 WAPRW1942 585 27
19 45 WAPRW1945 585 29
19 48 WAPRW1948 585 31
19 54 WAPRW1954 641 34
19 60 WAPRW1960 641 38
19 66 WAPRW1966 668 42
19 72 WAPRW1972 668 46
19 75 WAPRW1975 668 48
19 78 WAPRW1978 696 50
19 84 WAPRW1984 696 53
WABIN 107 1
Fabric Powder
Note — Wall mounted Seiri Screens mount to the wall with supplied sheet metal cleats. Wall Mounted Seiri Screen ships with 4 bins. Wall Mounted Seiri Screens are fully tackable. Seiri Bins fix magnetically to trays.
Wall Mounted
W
H
Seiri Screens (continued)
Seiri Bin Set
See Finish Guide for options.
WATSON ACCESSORIES
50 Watson
H W MODEL NUMBER PRICE WEIGHT
13 24 WASTL1324 277 6
13 30 WASTL1330 281 8
13 36 WASTL1336 286 9
13 42 WASTL1342 293 10
13 48 WASTL1348 298 12
13 54 WASTL1354 304 13
13 60 WASTL1360 309 15
13 66 WASTL1366 315 16
13 24 WAMOD1324 557 6
13 30 WAMOD1330 557 8
13 36 WAMOD1336 613 9
13 42 WAMOD1342 613 10
13 48 WAMOD1348 668 12
13 54 WAMOD1354 668 13
13 60 WAMOD1360 724 15
13 66 WAMOD1366 724 16
Note —
Powder
Acrylic
Steel
Note — Steel Modesty Shields are 16 gauge, powdercoated steel with fabric lining on the user side. Acrylic Modesty Shield is frosted acrylic with powdercoated steel detail and mounting brackets.
In some circumstances, the placement of the modesty shield may interfere with pre-installed grommets. It is recommended to use field installed grommets when specifying a modesty shield.
Modesty Shields
W
W
H
H
TERMS & CONDITIONS
Terms of Sale This Price List and these Terms of Sale supercede all previous price lists and terms. These prices and terms are subject to change without notice.
Prices List prices include freight costs as specified below. No other charges are included in Watson’s list prices unless otherwise specified in writing.
Terms of Payment Terms of payment will be established based on the credit rating and credit information provided by and for specific customers. Orders are invoiced at time of shipment. Standard payment terms are 50/50; 50% due at time of order and 50% due at time of shipment. Approved credit levels may be extended to net thirty (30) days. Past due accounts will be charged the lesser of 1-1/2% per month or the highest rate permitted by law plus all collection costs, including reasonable attorney’s fees and expenses.
Taxes The Customer shall pay all sales, use, excise and other taxes applicable to the sale. Resale and/or exemption certificates must be forwarded to Watson at the time of order.
Order Acceptance All orders must be submitted in writing. Watson does not accept an order until the order is verified complete by Watson, which will include price information and anticipated arrival date. The Order Confirmation is the final expression of the contract between the Customer and Watson.
Order Changes and Cancellations Purchase orders may not be changed or cancelled, in whole or in part, without prior written consent of Watson. Orders for which production has started may not be cancelled. Orders for non-standard products and non-standard finishes may not be cancelled.
Order changes may affect delivery dates. Expenses incurred because of order changes will be charged to the Customer. In the event of cancellations prior to the start of production for standard products, Customer will be liable for reasonable cancellation charges established by Watson.
Returns The return of Products to Watson shall not be accepted.
Landed Freight Program Order Minimums Order minimums have been determined to help us accurately compensate for our freight expenses on low-volume orders. Minimum order and freight charge rates for all territories have been specified below by zone. Overseas and non-contiguous US shipments made to a prearranged departure port in any zone, will adhere to the defined order minimum and freight charges in that zone. All shipments requiring cartoning are subject to an additional charge of 5% list. This charge applies when cartoning is requested by the customer for delivery in the contiguous US and Canada. ZONE 1 King, Pierce, and Kitsap Counties, WA No freight charge. All prices are landed and Watson will pay freight.
ZONE 2 WA (outside King, Pierce, and Kitsap Counties), OR, and CA For all orders less than $10,000 list, a freight charge of 5% list will be applied.
ZONE 3 Contiguous US (outside of WA, OR, and CA) and Canada For all orders less than $15,000 list, a freight charge of 5% list will be applied.
Shipping Program Watson employs an environmentally friendly shipping program that reduces costs and helps ensure furniture is delivered in the same condition as it left the factory. This careful handling may occasionally lengthen shipping times on LTL shipments. At Watson’s discretion and if it is determined in the best interest of customers, alternative shipping methods may be used. Special requests including special shipping methods, delivery outside normal hours (8 a.m. to 5 p.m. Monday through Friday), inside delivery, etc. shall be subject to an additional charge. Watson utilizes 53 foot trailers as standard. Accommodations requiring alternative trailer sizes shall be subject to an additional charge.
Freight Claims Watson assumes responsibility for seeking recourse against third-party freight carriers provided the following provisions are met: (i) any damage to delivered product must be noted on the Bill of Lading (BOL), (ii) Watson retains the rights to deny responsibility for any damage not noted on BOL, (iii) any damage or missing product must be reported to Watson immediately and any claim not made within 7 days of delivery may not be accepte, (iv) any items requiring replacement must be photo-documented and are subject to approval by Watson.
26246 Twelve Trees Lane NW, Poulsbo, Washington 98370800.426.1202 watsonfurniture.com
Packaging Worksurfaces and storage components are sent blanket wrapped. Frames are sent in cartons. The Customer may specify cartoning. When specifying cartoning for all items, add 5% of total list price.
Storage Watson will transfer Product to storage at the Customer’s risk and expense if the Customer is unable to take delivery of product as scheduled. Watson will invoice the Customer on a monthly basis for storage fees and the Customer will make payments in accordance with Watson’s standard payment terms.
Loss, Damage or Delay Watson shall not be liable for any loss, damage or delay resulting from forces beyond its reasonable control including fire, flood, strike or other labor difficulty, act of God, inability to obtain necessary labor, materials, or manufacturing facilities from usual sources, failure of suppliers to meet their contractual obligations, or due to any cause beyond its reasonable control. In the event of any such delay, delivery will be postponed by such length of time as may be reasonably necessary to accommodate for the delay.
Customer’s Own Material (COM) Customers may request fabrics, surface materials, and powdercoats that are not standard to Watson’s finish offering according to the guidelines below (FRAMES not included). Watson Customer Service will apprise customers of any possible impact on lead times resulting from the use of COM. Watson shall not be responsible for the appearance or performance of any COM material and customer shall hold Watson harmless for any damages or losses arising out of, or related to, the use of the COM on the Product. All requests for COM fabric must be tested and approved by Watson. An 8 inch by 8 inch sample swatch must be submitted to Watson for testing. Watson will notify customer of test results within 5 business days and provide written approval and a request form. Standard lead-time begins upon receipt of COM for production. No price adjustments will be made for COM fabric.
Special Order Laminates Non-specialty laminates from suppliers that are not on our finish card will be available subject to a $500 list up-charge for recycling excess materials. For requests concerning specialty laminates, please contact Customer Service, which will determine availability, schedule, and pricing. Evaluation of requests will take no longer than three business days.
Warranty Watson warrants to the original Customer that the Products it manufactures are free of defects in craftsmanship and materials found during normal single shift usage of the products during the warranty period. Watson shall, upon prompt written notice, repair or replace, at its option and costs, the affected part or parts. All separate component parts not manufactured by Watson (keyboard mechanisms, electric and data devices, etc.) shall be covered by the original manufacturer’s warranty. This warranty does not apply to: Damage caused by a carrier Normal wear and tear Defects caused by improper installation Third party materials applied to the products Products subjected to improper use and conditions Damage resulting from misuse, negligence, accident or alterations Etch Markerboard writing surfaces
Warranty Period Lifetime – All components manufactured by Watson Three Years – Motors and other electrical components. Two Years – Etch Markerboard writing surfaces All Other Components not Manufactured by Watson (period covered by the original manufacturer’s warranty)
EXCEPT AS STATED ABOVE, WATSON MAKES NO EXPRESS OR IMPLIED WARRANTIES AS TO ANY PRODUCT AND IN PARTICULAR MAKES NO WARRANTY OF FITNESS FOR ANY PARTICULAR PRODUCT EXCEPT FOR USE AS STANDARD OFFICE FURNITURE. PRODUCT REPAIR OR REPLACEMENT IS THE CUSTOMER’S EXCLUSIVE REMEDY FOR ANY AND ALL PRODUCT DEFECTS.
The remedies provided above are the Customer’s sole remedies for any failure of Watson to comply with its obligations regarding the workmanship of its products.
11/2014