Model SPC-44-Row Stalk Puller / Chopper

Model SPC-66-Row Stalk Puller / Chopper

Owner's NameDealer's NameSerial NumberDate Purchased

Model No.

CAT5117th EditionBeginning S/N: 500000Revised April 21, 2015

TABLE OF CONTENTS

CAT5117th Edition

June 1, 2012Revised Sept. 12, 2013Revised June 12, 2014Revised April 21, 2015

Model SPC-44-Row Stalk Puller / Chopper

Model SPC-66-Row Stalk Puller / Chopper

SPC-4 4-Row Frame & Shields...........................................................................SPC-4 4-Row Drives............................................................................................SPC-4 4-Row Rotor Assembly.............................................................................SPC-6 6-Row Frame & Shields...........................................................................SPC-6 6-Row Drives............................................................................................SPC-6 6-Row Rotor Assembly.............................................................................Wheel Puller Unit...................................................................................................Decals....................................................................................................................Numerical Parts Index...........................................................................................Warranty

3 579

1113151718

PageSection

The Terms "Left" and "Right" used in the description of parts are determined byfacing the direction of travel of the machine.

"A/R" found in the "Qty. Req'd" column denotes "As Required"."OPT" found in the "Qty. Req'd" column denotes "Optional".

NOTES

23

4

5

8

9

10

11

12

13

14

15

1

1

10

3 2

15

15

15

13

4

5

PA

GE

2

DIRECTIONOF

TRAVEL

6

7

17

18

7

16

ITEM PART NUMBER DESCRIPTION QTY SHOWN QTY REQ'D COMMENTS1 1465 PIN, LYNCH; 7/16 X 2 HD 22 2056 PIN, HITCH; 3/4 DIA. X 4-3/4 LONG 23 2196 PIN, PLATED HAIR COTTER; 3-9/16 X .178 24 2515 PLUG, 2" MALE PIPE; GALV. 25 7024 HOOK, SPRING LOADED; 90 DEGREE 26 20421 PIN, SNAPPER; 3/8 DIA. X 3 LONG 17 21080 PIN, CAT III/IV; LOWER 28 93594 FRAME, SPC-4 19 93595 BOX, WEIGHT 1

10 93608 LEG, SUPPORT 211 126636 SHIELD, LOWER; PULLER/CHOPPER 112 126660 SHIELD, LOWER CHAIN 113 126661 SHIELD, GEARBOX & DRIVELINE 214 127150 SHIELD, DRIVES 115 12935M HINGE, 3-1/2 INCH 416 G271957 SCREW,1-1/4 X 7 USS CAP GR8 117 G9419533 LOCKNUT, 1-1/4-7, GRADE 8 118 S21087 ASM, CAT IV TOPLINK PIN 1

SPC-4 4-ROW FRAME & SHIELDS

PAGE 3

1

2

4

5

6

7

8 9

10

12

13

14

15

17

18

19

20

21

22

17

17

17

8

8

8

9

9

18

18

18

5

2

22

5

18

182

13

11

11

11

11

16 14

3

3

3

PA

GE

4

DIRECTIONOF

TRAVEL

23

--SEE NOTE 1--

-- NOTE 1--

10751 SHAFT, MAIN DRIVE; 36" ROW 1 SPC-4-3610752 SHAFT, MAIN DRIVE; 38" ROW 1 SPC-4-3810753 SHAFT, MAIN DRIVE; 40" ROW 1 SPC-4-40

-- NOTE 2 -- PTO COMPONENTS--

1

--NOTE 3 -- U-JOINT COMPONENTS--11344A KIT, CROSS & BEARING; SIZE 411345B YOKE, 1-3/8 6-SPLINE 1

1

ITEM PART NUMBER DESCRIPTION QTY SHOWN QTY REQ'D COMMENTS1 1191 KEY, 3/8 X 1 12 3087 COLLAR, 2-3/16 ECCENTRIC LOCKING 3 INCLUDED WITH BEARING3 3148 INSERT, 2-3/16 BEARING, NONRELUB.; ECCENTRIC 34 5663 BUSHING, Q1 2-7/16 15 5691 BUSHING, Q1 - 2-3/16 36 10750 SHAFT, JACK 17 10751 SHAFT, MAIN DRIVE; 36" ROW 18 11343 GEARBOX, 2050 1:1 1-3/8-6 TEE B 49 11344 PTO, 1-3/8 - 6 SIZE 4 QD 450MM CTOC 3 --SEE NOTE 2--

10 11346 CLUTCH, RATCHET; SIZE 4 111 11369 JOINT, DBL U 1-3/8-6X1-3/8-6 RS,SIZE 4 4 --SEE NOTE 3--12 20592 STANDOFF, 5/8 BORE X 1-1/2 LONG 113 51405 IDLER,80A12,5/8 BORE 214 61563 ADJUSTER, SCREW; 5/8-11; 3/8-16 215 61564 ADJUSTER, CHAIN 116 61756 ADJUSTER, CHAIN 117 124869 SHIM, GEARBOX MOUNT 4 1618 3108-1 FLANGETTE,100MSZP FOR 2-3/16" BRG;ZINC PLATED 619 4365D-62 CHAIN, NO.80, 61 PITCHES+CONNECTOR 120 4365D-103 CHAIN, NO.80, 101 PITCHES+CONNECTOR+OFFSET 121 80Q17 SPROCKET, 80Q17 122 80Q18 SPROCKET, 80Q18 223 80Q24 SPROCKET, 80Q24 1

PART NO. DESCRIPTION QTY REQ'D COMMENTS

11344A KIT, CROSS & BEARING; SIZE 4 211344B YOKE, 1-3/8 6-SPLINE SIZE 4 PIN DISCONNECT 211344C YOKE, INNER, W/MALE TUBE 111344D YOKE, INNER, W/FEMALE TUBE

2

11345C JOINT, MIDDLE/DOUBLE UNIVERSAL11369A YOKE, 1-3/8 6-SPLINE RS 1

SPC-4 4-ROW DRIVES

PAGE 5

2

6

9

10

12

14

6

4

5

11

15

5

7

8

1

13

PA

GE

6

DIRECTIONOF

TRAVEL

5

5

3

3

INCLUDED IN OPTIONAL KIT #70642

INCLUDED IN OPTIONAL KIT #70642

INCLUDED IN OPTIONAL KIT #70642

ITEM PART NUMBER DESCRIPTION QTY SHOWN QTY REQ'D COMMENTS1 1830 WASHER, 1-1/4 OD X 7/16 ID X 10 GA GALV. 1 1922 2515 PLUG, 2" MALE PIPE; GALV. 13 3269 BEARING, 2-7/16 QM PILLOWBLOCK 2 (WITH COLLAR)4 51609 ROTOR, SPC-4 1 -- SEE NOTE 1 --5 61517 BLADE, 8" ANGLED 4 326 93759 PLATE, BEARING; SPC-4 27 127573 MOUNT, GUARD 1 32 INCLUDED IN OPTIONAL KIT #706428 127575 GUARD, POLYETHYLENE 1 329 G121574 LOCKWASHER, 5/8 1 410 G131016 WASHER, 5/8 SAE FLAT 1 411 G121200-8 NUT, 1/2-13 DEF. HEAD FLANGE; GRADE 8 1 9612 G121358-8 NUT, 5/8-18 SAE; GRADE 8 1 413 G180122T SCREW, 3/8-16 X 1 USS SELF-TAPPING HEX 1 19214 G271752-8 SCREW, 5/8-18 X 3 SAE CAP; GRADE 8 1 415 G451800-8 SCREW, 1/2-13 X 1-1/2 FLANGEHEAD CAP, GR 8 1 96

SPC-4 4-ROW ROTOR ASSEMBLY

PAGE 7

-- NOTE 1 --PART NUMBER DESCRIPTION COMMENTS51517 ROTOR, STALK PULLER/CHOPPER; 4 ROW SERIAL NO. 390000 - 40019951609 ROTOR, SPC-4; NON-GUSSETED BEGINNING SERIAL NO. 400200

23

4

5

8

9

10

11

12

16

23

16

16

16

4

5

8

14

15

15

14

PA

GE

8

DIRECTIONOF

TRAVEL

1

6

7

18

19

17

11

13

17

ITEM PART NUMBER DESCRIPTION QTY SHOWN QTY REQ'D COMMENTS1 1465 PIN, LYNCH; 7/16 X 2 HD 22 2056 PIN, HITCH; 3/4 DIA. X 4-3/4 LONG 23 2196 PIN, PLATED HAIR COTTER; 3-9/16 X .178 24 2515 PLUG, 2" MALE PIPE; GALV. 25 7024 HOOK, SPRING LOADED; 90 DEGREE 26 20421 PIN, SNAPPER; 3/8 DIA. X 3 LONG 17 21080 PIN, CAT III/IV; LOWER 28 93608 LEG, SUPPORT 29 93688 BOX, WEIGHT; SPC-6 1

10 93795 FRAME, SPC-6 111 127292 SHIELD, GEARBOX & DRIVELINE 212 127321 SHIELD, DRIVES 113 127454 SHIELD, LOWER; SPC-6 114 127470 SHIM 2 A/R15 127471 SPACER 216 12935M HINGE, 3-1/2 INCH 417 G271957 SCREW,1-1/4 X 7 USS CAP GR8 118 G9419533 LOCKNUT, 1-1/4-7, GRADE 8 119 S21087 ASM, CAT IV TOPLINK PIN 1

SPC-6 6-ROW FRAME & SHIELDS

PAGE 9

1

3

4

5

8

10

12

13

15

16

17

22

1

17

17

17

17

17

1

22

16

1616

16

16

1616

1616

1616

1616

1616

1616

1616

1616

1616

3

6

7

9

6

6

6

6

9

9

9

9

9

7

7

7

7

20

10

13

6

14

18

2

19

21

2

2

PA

GE

10

DIRECTIONOF

TRAVEL

11

ITEM PART NUMBER DESCRIPTION QTY SHOWN QTY REQ'D COMMENTS1 3087 COLLAR, 2-3/16 ECCENTRIC LOCKING 32 3148 INSERT, 2-3/16 BEARING, NONRELUB.; ECCENTRIC 33 5691 BUSHING, Q1 - 2-3/16 24 10822 SHAFT, JACK 15 10827 SHAFT, MAIN DRIVE; 38" ROW, SPC-6 1 10751 SHAFT, MAIN DRIVE; 36" ROW6 11343 GEARBOX, 2050 1:1 1-3/8-6 TEE B 67 11344 PTO, 1-3/8 - 6 SIZE 4 QD 450MM CTOC 5 -- SEE NOTE 1 --8 11346 CLUTCH, RATCHET; SIZE 4 19 11369 JOINT, DBL U 1-3/8-6X1-3/8-6 RS,SIZE 4 6 -- SEE NOTE 2 --

10 51405 IDLER,80A12,5/8 BORE 211 51475 BUSHING, SF 2-3/16 112 51601 BUSHING, SF 2-7/16 113 61563 ADJUSTER, SCREW; 5/8-11; 3/8-16 214 61564 ADJUSTER, CHAIN 115 61756 ADJUSTER, CHAIN 116 124869 SHIM, GEARBOX MOUNT 2417 3108-1 FLANGETTE,100MSZP FOR 2-3/16" BRG;ZINC PLATED 618 4365D-58 CHAIN, NO.80 DIAMOND, 57 PITCHES+CONNECTOR 119 4365D-109 CHAIN, NO.80, 107 PITCHES+CONNECTOR+OFFSET 120 80Q19 SPROCKET, 80Q19 121 80Q21 SPROCKET, H80Q21 122 80SF20 SPROCKET, 80SF20 2

SPC-6 6-ROW DRIVES

PAGE 11

-- NOTE 1 -- PTO COMOPONENTS --PART NO. DESCRIPTION QTY REQ'D COMMENTS

11344A KIT, CROSS & BEARING; SIZE 4 211344B YOKE, 1-3/8 6-SPLING SIZE 4 PIN DISCONNECT 211344C YOKE, INNER, W/MALE TUBE 111344D YOKE, INNER, W/FEMALE TUBE 1

-- NOTE 2 -- U-JOINT COMPONENTS --11344A KIT, CROSS & BEARING; SIZE 4 211345B YOKE, 1-3/8 6-SPLINE 111345C JOINT, MIDDLE/DOUBLE UNIVERSAL 111369A YOKE, 1-3/8 6-SPLINE RS 1

8

11

15

1

3

4

4

4

4

4

4

8

5

6

7

12

6

5

7

PA

GE

12

DIRECTIONOF

TRAVEL

2

2

9

10

13

14

ITEM PART NUMBER DESCRIPTION QTY SHOWN QTY REQ'D COMMENTS1 2515 PLUG, 2" MALE PIPE; GALV. 12 3270 BEARING, 2-15/16 QM PILLOWBLOCK 2 (WITH COLLAR)3 51614 ROTOR, SPC-6 14 61517 BLADE, 8" ANGLED 6 605 80663 GUARD,MUD; 21" LG. 2 206 80664 GUARD,MUD; 23" LG. 2 207 80665 GUARD,MUD; 25" LG. 2 208 93797 PLATE, BEARING; SPC-6 29 G131017 WASHER, 3/4 SAE FLAT 1 4

10 G131046 LOCKWASHER, 3/4 1 411 G121200-8 NUT, 1/2-13 DEF. HEAD FLANGE; GRADE 8 1 18012 G180079T SCREW, 5/16-18 X 1 TAP. WASHERHEAD 1 18013 G271799-8 SCREW, 3/4-16 X 3-1/2 SAE CAP GRADE 8 1 414 G426099-8 NUT, 3/4-16 SAE; GRADE 8 1 415 G451800-8 SCREW, 1/2-13 X 1-1/2 FLANGEHEAD CAP, GR 8 1 180

SPC-6 6 ROW ROTOR ASSEMBLY

PAGE 13

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

19

20

23

1

2

3

6

7

7

7

8

9

10

11

11

11

12

13

14

16

17

20

23

18

PAGE 14

SPACER, WHEEL PULLER UNIT

ITEM PART NUMBER DESCRIPTION QTY SHOWN QTY REQ'D COMMENTS1 1207 KEY, 3/8 X 2 22 3240 BEARING, 80MM X 40MM X 28MM 23 3241 BEARING, 90MM X 40MM X 23MM 24 10792 SHAFT, DRIVE WHEEL 15 10793 SHAFT, IDLER WHEEL 16 20635 RING, 40MM EXT.RETAINING; 0.120 GROOVE 27 20636 RING, 80MM INT. RET; .120 GRV 48 20723 RING, EXTERNAL RETAINING; 5" 2 OPT9 51794 HUB, SPC 2

10 51795 COLLAR, SPC HUB 211 70392 SPRING, BELLEVILLE DISC; 1-7/8 OD 412 80329 SEAL, 90MM X 40MM X 10MM DOUBLE LIP 213 80379 SEAL, 80MM X 60MM X 10MM TC 214 80410-L-S WHEEL ASSEMBLY, 18X9.5;4P;4ON4 215 93342 HEAD, WHEEL PULLER UNIT; CSP02 116 124882 SHIELD, U-JOINT 217 127036 DISC, DIRT SHIELD 2 OPT18 129663 SPACER, WHEEL PULLER UNIT 1 -- SEE NOTE 1 --19 80113E BOLT, LUG 1 820 G181680-SS SCREW, 7/16-20X3-1/2 HEX CAP 304 SS 221 G271506-SS NUT, 7/16-20 304 SS 222 G271507-8 NUT,7/16-20 SERRATED FLANGE; GR8 223 G271547 SCREW, 5/8-11 X 1-1/2 USS CAP 2

PAGE 15

-- NOTE 1 --PART NUMBER DESCRIPTION QTY REQ'D COMMENTS

129663 SPACER, WHEEL PULLER UNIT 1 1/4 THICK129091 OPT 3/8 THICK

WHEEL PULLER UNIT

Page 16

1

3

2

DECAL, "CAUTION" (LIST)DECAL, DO NOT OPERATE WITHOUT SHIELDS

ITEM PART NUMBER DESCRIPTION QTY SHOWN QTY REQ'D COMMENTS1 80935 DECAL, CAUTION: READ OPERATOR'S MANUAL 12 80936 13 80941 1

THE FOLLOWING DECALS ARE USED BUT ARE NOT SHOWN8343 DECAL, AMADAS "AMERICAN MADE" 180417 DECAL, SPC-4 2 SPC-480452 DECAL, SPC-6 2 SPC-680418 DECAL, "AMADAS"; 28-1/2" 28424 DECAL, 3M HONEYCOMB YELLOW REFLECTIVE A/R8425 DECAL, 3M HONEYCOMB RED REFLECTIVE A/R8519 DECAL, SLOW MOVING VEHICLE 180684 DECAL, RED/WHITE STRIPE A/R80875 DECAL, "CHECK DAILY ..." 1

DECALS

PAGE 17

4

NUMERICAL PARTS INDEX

PAGE 18

PART NO. PAGE PART NO. PAGE PART NO. PAGEG121200-8 7, 13 1830 7 80941 17G121358-8 7 20421 3, 9 8343 17G121574 7 2056 3, 9 8424 17G131016 7 20592 5 8425 17G131017 13 20635 15 8519 17G131046 13 20636 15 93342 15G180079T 13 20723 15 93594 3G180122T 7 21080 3, 9 93595 3G181680-SS 15 2196 3, 9 93608 3, 9G271506-SS 15 2515 3, 7, 9 93688 9G271507-8 15 2515 13 93759 7G271547 15 3087 5, 11 93795 9G271752-8 7 3108-1 5, 11 93797 13G271799-8 13 3148 5, 11G271957 3, 9 3240 15G426099-8 13 3241 15G451800-8 7, 13 3269 7G9419533 3, 9 3270 13S21087 3, 9 4365D-103 510750 5 4365D-109 1110751 5 4365D-58 1110752 5 4365D-62 510753 5 51405 5, 1110792 15 51475 1110793 15 51517 710822 11 51601 1110827 11 51609 711343 5, 11 51614 1311344 5, 11 51794 1511344A 5, 11 51795 1511344B 5, 11 5663 511344C 5, 11 5691 5, 1111344D 5, 11 61517 7, 1311345B 5, 11 61563 5, 1111345C 5, 11 61564 5, 1111346 5, 11 61756 5, 1111369 5, 11 7024 3, 911369A 5, 11 70392 151191 5 80Q17 51207 15 80Q18 5124869 5, 11 80Q19 11124882 15 80Q21 11126636 3 80Q24 5126660 3 80SF20 11126661 3 80113E 15127036 15 80329 15127150 3 80379 15127292 9 80410-L-S 15127321 9 80417 17127454 9 80418 17127470 9 80452 17127471 9 80663 13127573 7 80664 13127575 7 80665 13129091 15 80684 1712935M 3, 9 80875 17129663 15 80935 171465 3, 9 80936 17

ONE-YEAR LIMITED WARRANTYFor AMADAS INDUSTRIES STALK PULLER/CHOPPER

A. General ProvisionsThe Warranties described below are provided by AMADAS INDUSTRIES (“AMADAS”) through its authorized

dealers to the original purchaser of each new AMADAS Stalk Puller / Chopper. AMADAS will repair or replace, atits option, any part covered under warranty which is found to be defective in material or workmanship during theapplicable period of warranty. This warranty is applicable only to the cost of the part replaced or repaired and doesnot cover labor costs involved in installing the replaced or repaired defective part.

B. What is Warranted?All parts of any new AMADAS Stalk Puller / Chopper are warranted for 12 months. The warranty period will

begin when the Stalk Puller / Chopper is delivered to the purchaser. AMADAS will repair or replace, at its option,any new part or component under the above warranty, if a defect in material or workmanship appears in such partor component and is reported to AMADAS before the expiration of the applicable equipment warranty.

Used equipment is not warranted by AMADAS unless it is specifically covered by a separate warrantydocument. The above warranties cover only defective material and workmanship. The warranties do not cover anydepreciation or failure caused by normal wear, lack of proper maintenance or use, misuse, lack of proper protectionduring storage, or accident. The purchaser shall pay all costs of routine maintenance and/or replacement ofmaintenance and wear items.

C. Unapproved Service or ModificationAll Obligations of AMADAS under this warranty are terminated if the Stalk Puller / Chopper is modified or

altered in ways not approved by AMADAS.

D. Securing Warranty ServiceTo secure warranty service, the purchaser must (1) report the product defect and request repair within the

applicable warranty period, (2) present evidence of the date of delivery of the Stalk Puller / Chopper, and (3) makethe Stalk Puller / Chopper available to an AMADAS authorized dealer within a reasonable period of time.

E. No Dealer WarrantyThe selling dealer makes no warranty of his own on any item warranted by AMADAS, and makes no warranty

on other items. The dealer has no authority to make any representation or promise on behalf of AMADAS, or to modifythe terms or limitations of this warranty in any way.

F. What are your Responsibilities?a. Read the operator’s manual before operating the equipment.b. Perform all necessary maintenance as described in the operator’s manual.c. Deliver the machine to an AMADAS authorized dealer at your expense during normal working hours for any

needed warranty services.d. Contact an AMADAS authorized dealer promptly on any claim for warranty service.e. Sign the AMADAS machinery delivery form, which will be given to you by the dealer.

G. DisclaimerThere are no warranties that extend beyond the description here. ANY WARRANTIES OF MERCHANTA-

BILITY AND FITNESS FOR ANY PARTICULAR PURPOSE ARE SPECIFICALLY DISCLAIMED AS ARE ALLOTHER REPRESENTATIONS TO THE PURCHASER. AMADAS specifically excludes any liability on behalf of thecompany for any incidental or consequential damages including, but not limited to, crop loss, loss of profits, rentalof substitute equipment, or other commercial losses. AMADAS shall not be responsible for expenses orinconveniences that you might incur or experience with respect to the AMADAS Stalk Puller / Chopper, nor shallAMADAS be liable for defects, damage, or failures caused by improper storage, unreasonable use, or abuse, oraccident, including the failure to provide reasonable and specified maintenance. This warranty applies only to theoriginal purchaser of the equipment. Because some states do not allow the exclusion of limitations of incidental orconsequential damages, the above limitation may not apply to you. This warranty gives you specific legal rights. Youmay also have other rights, which vary from state to state. Where there is a conflict between a provision of this warrantyand the provision of any state, the state legislation prevails.