Monthly Notifications Register - 31.45.242.21831.45.242.218/pdf/MNR/201008CENmnr.pdf · National annex to Eurocode 1 - Actions on structures - Part 3: ... ÖNORM EN 1337-10 and ÖNORM

Information procedure Page 1

Monthly Notifications Register

Notifications registered at CCMC from 2010-08-01 to 2010-08-31

Register issued on : 2010-09-02

A list of subsectors can be found at the end of this document.




Sector A : SERVICES


Page 3Subsector A04: TRANSPORTATION SERVICES

Subsector : A04 Registration Date : 2010-08-10Organization : DINCountry : GermanyProject ID : 04300564/0001 Project EstablishedICS :National Ref : 04300564Title : Business forms - Forwarding instruction

Relatedness :National : New

** End of Subsector **

Subsector A06: BUILDING AND CONSTRUCTION SERVICES

Subsector : A06 Registration Date : 2010-08-27Organization : EVSCountry : EstoniaProject ID : 00098190/0001 Project EstablishedICS : 03.060, 91.010National Ref : project 98190Title : Standard applicable to the conclusion and content of liability insurance contracts

concluded with regard to construction-related activitiesScope : The aim of the standard is to unify the terms and conditions of optional liability insurance

contracts which are concluded in connection with construction-related activities. The aims of the standard would be completely achieved if the insurance providers would refer to the standard as a set of general terms in the insurance policies of the insurance agreements concluded by such insurance providers.



Subsector A08: FUNERAL SERVICES

Subsector : A08 Registration Date : 2010-08-03Organization : BSICountry : United KingdomProject ID : 01001929/0001 Project EstablishedICS :National Ref : BS 8210Title : Guide to facilities maintenance management



Subsector A99: UNDETERMINED

Subsector : A99 Registration Date : 2010-08-11Organization : NENCountry : Netherlands

Page 4

Project ID : 50001581/0001 Project EstablishedICS : 53.020.99, 97.200.99National Ref : NPR 8020-15:2010 Concept nlTitle : Entertainment - Rigging - Securing of loadsScope : This code of practice is applicable to the design and use of securing steel cables in the

entertainment industry preventing loads from falling down. This code of practice deals with securing applications in combination with fasteners.



** End of Sector **




Sector B : BUILDING AND CONSTRUCTION


Page 6Subsector B01: FIRE PROTECTION

Subsector : B01 Registration Date : 2010-08-10Organization : DINCountry : GermanyProject ID : 03100757/0001 Project EstablishedICS :National Ref : 03100757Title : Water conduit for fire extinguishing - Planning, installation, operation and maintenance

of fire hose systems and pillar fire hydrant and underground fire systems


Subsector : B01 Registration Date : 2010-08-11Organization : NENCountry : NetherlandsProject ID : 50001586/0001 Project EstablishedICS : 13.220.20National Ref : NPR 6095-2:2010 Concept nlTitle : Smoke and heat control systems - Part 2: Guidelines on design and installation of

pressurisation installationsScope : In this code of practice design and assessment guidelines for installation technical facilities

creating and maintaing excessive pressure in case of fire, to keep certain rooms free from smoke


Subsector : B01 Registration Date : 2010-08-11Organization : NENCountry : NetherlandsProject ID : 50001587/0001 Project EstablishedICS : 13.220.20National Ref : NEN 2654-3:2010 Concept nlTitle : Management, control and maintenance of fire safety systems - Part 3: Smoke and heat

control systemsScope : Smoke and heat control systems include smoke and heat exhaust control systems, pressure

differential systems in staircases and lift shafts, ventilation systems in parking garages and tunnels.



Subsector B02: STRUCTURES

Subsector : B02 Registration Date : 2010-08-19Organization : SIST Draft Issue Date : 2010-09-01Country : Slovenia Latest Date for Comments : 2011-01-01Project ID : 00005273/0001 Project EstablishedICS : 91.010, 91.010.30National Ref : SIST EN 1991-3:2006/A101:2010

National annex to Eurocode 1 - Actions on structures - Part 3: Actions induced by

Page 7

Title : cranes and machineryScope : This document specifies actions, self-weights and loads associated with hoists, crabs and

cranes on runway beams, static and dynamic actions induced in supporting structures by machinery and permanent, variable and accidental actions induced by transport vehicles


Subsector : B02 Registration Date : 2010-08-19Organization : SIST Draft Issue Date : 2010-09-01Country : Slovenia Latest Date for Comments : 2011-01-01Project ID : 00005274/0001 Project EstablishedICS : 91.010, 91.010.30National Ref : SIST EN 1991-4:2006/oA101:2010Title : National annex to Eurocode 1 - Actions on structures - Part 4: Silos and tanksScope : National Annex to SIST EN 1991-4:2006 Eurocode 1 - Actions on structures - Part 4: Silos

and tanks - This part provides national parameters for general principles and actions for the structural design of silos for the storage of particulate solids and tanks for the storage of fluids in conjunction with EN 1990, other parts of EN 1991 and EN 1992 to EN 1999


Subsector : B02 Registration Date : 2010-08-11Organization : ASICountry : AustriaProject ID : 00023378/0001 Project EstablishedICS : 91.010.30National Ref : ÖNORM B 1991-1-4Title : Eurocode 1: Actions on structures - Part 1-4: General actions - Wind actions - National

specifications concerning ÖNORM EN 1991-1-4 and national supplementsScope : This Austrian Standard specifies national parameters to ÖNORM EN 1991-1-4 and shall be

applied jointly with ÖNORM EN 1991-1-4 in Austria. EN 1991-1-4 gives guidance on the determination of natural wind actions for the structural design of building and civil engineering works for each of the loaded areas under consideration. This includes the whole structure or parts of the structure or elements attached to the structure, e. g. components, cladding units and their fixings, safety and noise barriers. This Part is applicable to: Buildings and civil engineering works with heights up to 200 m. Bridges having no span greater than 200 m, provided that they satisfy the criteria for dynamic response. This part is intended to predict characteristic wind actions on land-based structures, their components and appendages. Certain aspects necessary to determine wind actions on a structure are dependent on the location and on the availability and quality of meteorological data, the type of terrain, etc. These need to be provided in the National Annex and Annex A, through National choice by notes in the text as indicated. Default values and methods are given in the main text, where the National Annex does not provide information. Annex A gives illustrations of the terrain categories and provides rules for the effects of orography including displacement height, roughness change, influence of landscape and influence of neighbouring structures.


Page 8

Subsector : B02 Registration Date : 2010-08-11Organization : ASICountry : AustriaProject ID : 00023379/0001 Project EstablishedICS : 93.040National Ref : ÖNORM B 4022Title : Bridge bearings - Requirements for the structure, the installation of bearings and the

exchange of bearings Scope : In this standard all specific requirements on bridge bearings concerning transport, storage,

installation inspection, maintenance and exchange of bearings. This standard supplements ÖNORM EN 1337-10 and ÖNORM EN 1337-11.


Subsector : B02 Registration Date : 2010-08-10Organization : DINCountry : GermanyProject ID : 00515327/0001 Project EstablishedICS :National Ref : 00515327Title : Masonry - Part 4: Prefabricated masonry compound units


Subsector : B02 Registration Date : 2010-08-04Organization : ASRO Draft Issue Date : 2010-09-30Country : Romania Latest Date for Comments : 2010-11-30Project ID : 19911722/0001 Project EstablishedICS : 91.010.30National Ref : SR EN 1991-1-7:2007 NB:2011Title : Eurocode 1 - Actions on structures - Part 1-7: General actions – Accidental actions.

National AnnexScope : The standard defines SR EN 1991-1-7:2007 requirements applicable to the design on the

territory of Romania

Relatedness :National : REV/AMD SR EN 1991-1-7:2007

Subsector : B02 Registration Date : 2010-08-13Organization : NBN Draft Issue Date : 2010-08-16Country : Belgium Latest Date for Comments : 2011-01-16Project ID : BE611135/0001 Draft for public enquiryICS : 91.010.30National Ref : prNBN EN 1991-1-7 ANBTitle : Eurocode 1 - Actions on structures - Part 1-7 : General actions - Accidental actions -

National annex



Page 9Subsector B04: CEMENT

Subsector : B04 Registration Date : 2010-08-10Organization : DINCountry : GermanyProject ID : 00515207/0001 Project EstablishedICS :National Ref : 00515207Title : Floor screeds - Part 4: Screeds laid on separated layer


Subsector : B04 Registration Date : 2010-08-10Organization : DINCountry : GermanyProject ID : 00515208/0001 Project EstablishedICS :National Ref : 00515208Title : Floor screeds - Part 7: Heavy-duty screeds (industrial screeds)



Subsector B17: LIGHTING EQUIPMENT AND LIGHTING APPLICATION TECHNOLOGY

Subsector : B17 Registration Date : 2010-08-11Organization : NENCountry : NetherlandsProject ID : 50001584/0001 Project EstablishedICS : 91.140.50National Ref : NPR 5310:2007/A1 Concept nlTitle : Netherlands interpretation guide for NEN 1010Scope : Netherlands interpretation guide for NEN 1010



Subsector B20: DRAINAGE EQUIPMENT

Subsector : B20 Registration Date : 2010-08-12Organization : UNMZ Draft Issue Date : 2010-09-01Country : Czech Republic Latest Date for Comments : 2010-11-30Project ID : 75002910/0001 Project EstablishedICS :National Ref :Title : Design, construction and service rainfall seepage devicesScope : The aim of the project is to create new standard suitable for design, construction and

service rainfall seepage devices.

Relatedness :

Page 10

National : REV/AMD ČSN 75 9010

Subsector : B20 Registration Date : 2010-08-12Organization : UNMZ Draft Issue Date : 2010-06-20Country : Czech Republic Latest Date for Comments : 2010-09-30Project ID : 75003010/0001 Draft for public enquiryICS :National Ref :Title : Construction and testing of drains and sewersScope : Development of national annex that will contain some supplementary information from

withdrawn national standard ČSN 73 3050 Earth works.

Relatedness :National : REV/AMD CSN EN 1610

Subsector : B20 Registration Date : 2010-08-12Organization : UNMZ Draft Issue Date : 2010-11-01Country : Czech Republic Latest Date for Comments : 2011-02-28Project ID : 75004510/0001 Project EstablishedICS :National Ref :Title : Sewer systems and drainsScope : The aim of the revision is unification of terminology with contemporary legislation.

Relatedness :National : REV/AMD ČSN 75 6101 (2004)


Subsector B25: GAS DISTRIBUTION INSTALLATION AND RELATED EQUIPMENT

Subsector : B25 Registration Date : 2010-08-11Organization : NENCountry : NetherlandsProject ID : 50001575/0001 Project EstablishedICS : 91.140.40National Ref : NPR 3378-23:2010 Concept nlTitle : Guidelines for NEN 1078-Part 23: Type C gasfired airheaters in commercial parks and

repairshops for motorvehiclesScope : In this code of practice possibilities are described for the installation of type C gasfired

airheaters in garages. Also showrooms are included.



Subsector B26: ROAD BUILDING AND MAINTENANCE

Subsector : B26 Registration Date : 2010-08-25Organization : SUTNCountry : SlovakiaProject ID : 73006310/0001 Project Established

Page 11

ICS : 93.080.10National Ref : STN 73 6126Title : Road building. Unbound courses Scope : EN 13285 determines requirements for unbound mixtures by means of citations on EN

13242. STN 73 6126:1996 determines besides specifications for aggregates also conditions for building works of unbound mixtures. Discrepancy between national and European standards solves the revision of the national standard.

Relatedness :National : REV/AMD STN 73 6126

Subsector : B26 Registration Date : 2010-08-25Organization : SUTNCountry : SlovakiaProject ID : 73006410/0001 Project EstablishedICS : 93.080.10National Ref : STN 73 6125Title : Road building. Stabilised basesScope : Series of standards EN 14227 determines requirements for hydraulically bound mixtures by

means of citations on EN 13242. STN 73 6124:1996 determines besides specifications for aggregates also conditions for building works of stabilised bases. Discrepancy between national and European standards solves the revision of the national standard.


Subsector : B26 Registration Date : 2010-08-25Organization : SUTNCountry : Slovakia

Project ID : 73006510/0001Project

Established

ICS :19.060, 91.100.10, 91.100.30, 93.080.10

National Ref : STN 73 6124Title : Road building. Agregates cemented with hydraulic binderScope : Series of standards EN 14227 determines requirements for hydraulically bound mixtures by

means of citations on EN. STN 73 6124:1996 determines besides specifications for aggregates also conditions for building works of aggregates cemented with hydraulic binder. Discrepancy between national and European standards solves the revision of the national standard.


Subsector : B26 Registration Date : 2010-08-19Organization : SNV Draft Issue Date : 2010-08-18Country : Switzerland Latest Date for Comments : 2010-10-08Project ID : CH100016/0001 Draft for public enquiryICS : 93.080.30National Ref : SN 640065aTitle : Easy two-wheeled traffic; identification of needs and location of parking systems

Page 12

Relatedness :National : REV/AMD SN 640065 (1996)

Subsector : B26 Registration Date : 2010-08-19Organization : SNV Draft Issue Date : 2010-08-18Country : Switzerland Latest Date for Comments : 2010-10-08Project ID : CH100017/0001 Draft for public enquiryICS : 93.080.30National Ref : SN 640066aTitle : Easy two-wheeled traffic; design of parking systems

Relatedness :National : REV/AMD SN 640066 (1996)


Subsector B29: AGGREGATES

Subsector : B29 Registration Date : 2010-08-11Organization : ASICountry : AustriaProject ID : 00023375/0001 Project EstablishedICS : 73.020, 91.100.15National Ref : ÖNORM EN 1097-8/ATitle : Tests for mechanical and physical properties of aggregates - Part 8: Determination of

the polished stone value (Amendment)Scope : This Standard describes the reference method used for type testing and in cases of dispute

for determining the polished stone value (PSV) of a coarse aggregate used in road surfacings. For other purposes, in particular factory production control, other methods may be used provided that an appropriate working relationship with the reference method has been established. Annex A describes an optional method for the determination of the aggregate abrasion value (AAV).



Subsector B33: BUILDING DESIGN

Subsector : B33 Registration Date : 2010-08-03Organization : BSICountry : United KingdomProject ID : 01001804/0001 Project EstablishedICS :National Ref : BS XXXXTitle : Design of accessible housing. Code of practice



Subsector B99: UNDETERMINED

Page 13

Subsector : B99 (Secondary Subsector)

Registration Date : 2010-08-11

Organization : NENCountry : NetherlandsProject ID : 50001584/0001 Project EstablishedICS : 91.140.50National Ref : NPR 5310:2007/A1 Concept nlTitle : Netherlands interpretation guide for NEN 1010Scope : Netherlands interpretation guide for NEN 1010



** End of Sector **




Sector C : CHEMICALS, CHEMICAL ENGINEERING AND FOOD PRODUCTS


Page 15Subsector C99: UNDETERMINED

Subsector : C99 Registration Date : 2010-08-10Organization : DINCountry : GermanyProject ID : 02000822/0001 Project EstablishedICS :National Ref : 02000822Title : Hooks for meat and other food - Tubular track roller hook - Safety



** End of Sector **




Sector F : FUNDAMENTAL STANDARDS


Page 17Subsector F05: MEASURING INSTRUMENTS

Subsector : F05 Registration Date : 2010-08-11Organization : ASICountry : AustriaProject ID : 00023376/0001 Project EstablishedICS : 17.040.30National Ref : ÖNORM M 1349Title : Verification of measuring and test equipment - Testing instruction for measuring tapesScope : This ÖNORM defines - based on the principles of the verification of measuring and test

equipment according to ÖNORM M 1340 - inspection instructions for measuring tapes with winder frames or winder cases made of steel and other materials with specific characteristics (modulus of elasticity, thermal coefficient of expansion) for linear measure. The inspection instructions has to be used for the qualification test as well as the performance test.



Subsector F07: DOCUMENTATION AND INFORMATION

Subsector : F07 Registration Date : 2010-08-10Organization : DINCountry : GermanyProject ID : 14002750/0001 Project EstablishedICS :National Ref : 14002750Title : Application of standards and other technical rules for defence products and services -

Order of preference; priorities



Subsector F12: INFORMATION PROCESSING SYSTEMS

Subsector : F12 Registration Date : 2010-08-11Organization : NENCountry : NetherlandsProject ID : 50001576/0001 Project EstablishedICS : 01.140.20National Ref : NPR 2083:2010 Concept nlTitle : Integrated application of ISO standards in information managementScope : In this code of practice attention is drawn to EN-ISO 9001, ISO 15489-1 en ISO/IEC 27001.

Guidance is given how to integrate these standards into companies management.


Subsector : F12 Registration Date : 2010-08-11Organization : NENCountry : Netherlands

Page 18

Project ID : 50001588/0001 Project EstablishedICS : 11.020, 35.240.80National Ref : NTA 7508:2010 Concept nlTitle : Health Informatics - Messages in healthcare - Basic structure for messages on medical

microbiology and medical immunologyScope : This technical agreement concerning health informatics is meant for the following users:

health suppliers of medical records software for specialists, suppliers of information systems of general practitioners and developers of laboratory softeware.


Subsector : F12 Registration Date : 2010-08-11Organization : NENCountry : NetherlandsProject ID : 50001589/0001 Project EstablishedICS : 03.120, 13.160National Ref : NTA 8009:2010 Concept nlTitle : Safety management system for hospitals and institutions which deliver hospital careScope : Gives specifications to set up a system for safety in hospitals for patients and employees.

Gives definitions for safety, responsibilities and the requirements for employees.



Subsector F20: QUALITY ASSURANCE

Subsector : F20 Registration Date : 2010-08-03Organization : BSICountry : United KingdomProject ID : 01002247/0001 Project EstablishedICS :National Ref : BS 5760-0Title : Reliability of constructed or manufactured products, systems, equipment and

components. Part 0. Introductory guide to reliability



** End of Sector **




Sector H : PRODUCTS FOR HOUSEHOLD AND LEISURE USE


Page 20Subsector H01: CINEMATOGRAPHY

Subsector : H01 Registration Date : 2010-08-10Organization : DINCountry : GermanyProject ID : 14900069/0001 Project EstablishedICS :National Ref : 14900069Title : Radiation sensitive films - cellulose nitrate film - Part 3: terminology, properties,

utilization, storage



** End of Sector **




Sector I : MECHANICAL ENGINEERING


Page 22Subsector I09: SMALL TOOLS

Subsector : I09 Registration Date : 2010-08-10Organization : DINCountry : GermanyProject ID : 02000820/0001 Project EstablishedICS :National Ref : 02000820Title : Garden tools - Non-motorized tools for using in soil - Sand shovel, rounded Dutch type


Subsector : I09 Registration Date : 2010-08-10Organization : DINCountry : GermanyProject ID : 02000821/0001 Project EstablishedICS :National Ref : 02000821Title : Garden tools - Non-motorized tools for using in soil - Digging fork


Subsector : I09 Registration Date : 2010-08-10Organization : DINCountry : GermanyProject ID : 12101692/0001 Project EstablishedICS :National Ref : 12101692Title : Round punches with straight shaft up to 20 mm cutting diameter


Subsector : I09 Registration Date : 2010-08-10Organization : DINCountry : GermanyProject ID : 12800227/0001 Project EstablishedICS :National Ref : 12800227 gelöschtTitle : Tabular layouts of properties - Part 95: Interface coding for tools and clamping devices


Subsector : I09 Registration Date : 2010-08-10Organization : DINCountry : GermanyProject ID : 12800228/0001 Project EstablishedICS :National Ref : 12800228

Page 23

Title : Tabular layouts of properties - Part 175: ...Titel ergänzen...



Subsector I18: MINING

Subsector : I18 Registration Date : 2010-08-10Organization : DINCountry : GermanyProject ID : 00802199/0001 Project EstablishedICS :National Ref : 00802199Title : Chain connectors - Part 1: Flat type connectors


Subsector : I18 Registration Date : 2010-08-10Organization : DINCountry : GermanyProject ID : 00802201/0001 Project EstablishedICS :National Ref : 00802201Title : Chain connectors - Part 3: Block type connectors



Subsector I19: NUCLEAR ENERGY

Subsector : I19 Registration Date : 2010-08-10Organization : DINCountry : GermanyProject ID : 06233528/0001 Project EstablishedICS :National Ref : 06233528Title : Nuclear facilities - Protection of metallic surfaces of structural parts from damage from

assembly aids, gaskets, packings, packaging material and thermal insulating materials


Subsector : I19 Registration Date : 2010-08-10Organization : DINCountry : GermanyProject ID : 06233529/0001 Project EstablishedICS :National Ref : 06233529Title : Nuclear facilities - Surface cleanliness of components

Page 24


Subsector : I19 Registration Date : 2010-08-10Organization : DINCountry : GermanyProject ID : 06233530/0001 Project EstablishedICS :National Ref : 06233530Title : Primary-coolant clean-up system in nuclear power plants with light water reactors



** End of Sector **




Sector M : METALLIC MATERIALS


Page 26Subsector M01: STEEL

Subsector : M01 Registration Date : 2010-08-11Organization : ASICountry : AustriaProject ID : 00023380/0001 Project EstablishedICS : 91.080.40National Ref : ÖNORM B 4758Title : Prestressing steel - Requirements, classification and conformity assessmentScope : This ÖNORM gives requirements and classes for prestressing steel, which are used for the

prestressing of concrete, but also for other applications in building works. Following different kinds of prestressing steel are given in this standard: wires, strands and bars. In this standard the system of conformity is described (initial type testing, factory production control, third party control), whereas the given requirements of prestressing steel have to be verified. There exist also a European work item on this subject. After publication of the European standard, this standard B 4758 will be adjusted according the European standard or withdrawn.



Subsector M14: NICKEL

Subsector : M14 (Secondary Subsector)


Organization : BSICountry : United KingdomProject ID : 01002231/0001 Project EstablishedICS :National Ref : BS 3HR 2:2010+A1Title : Specification for nickel-chromium-cobalt-titanium-aluminium heat-resisting alloy billets,

bars, forgings and parts (nickel base, Cr 19.5, Co 18.0, Ti 2.5, Al 1.5)



Subsector M15: METALLIC CORROSION

Subsector : M15 Registration Date : 2010-08-03Organization : BSICountry : United KingdomProject ID : 01002079/0001 Project EstablishedICS :National Ref : BS 7195:1989+A1Title : Guide for prevention of corrosion of metals caused by vapours from organic materials



** End of Sector **




Sector N : NON-METALLIC MATERIALS


Page 28Subsector N04: REFRACTORIES

Subsector : N04 Registration Date : 2010-08-03Organization : UNICountry : ItalyProject ID : 1312C970/0001 Project EstablishedICS : 83.100National Ref : E1312C970Title : Flexible cellular polymeric materials - Determination of resistance to dynamic fatigue by

constant deformationScope : The standard describes a method for determining the dynamic fatigue by constant

deformation of a flexible cellular polymeric materials by measuring the percentage change in thickness and in the compression stress (CV40) that undergoes after being subjected to cycles of compression / decompression. The standard applies in particular to the materials used as padding.

Relatedness :National : REV/AMD UNI 6356-2:1988

Subsector : N04 Registration Date : 2010-08-03Organization : UNICountry : ItalyProject ID : 1325602H/0001 Project EstablishedICS : 13.030.50, 83.080.01National Ref : E1325602HTitle : Plastic raw-secondary materials - Blends of heterogeneous plastics based on

polyolefins from industrial residue and/or from post consumer materials to be used for reducing processes in blast furnace - Part 17: Requirements and test methods

Scope : This standard applies to plastic raw-secondary materials from made from recycling of plastics from industrial residue and/or from post consumer materials; it defines the requirements and the tests methods of heterogeneous mixtures base on recycled polyolefins to be used alone or in blends with other materials for reducing processes in blast furnace.


Subsector : N04 Registration Date : 2010-08-03Organization : UNICountry : ItalyProject ID : 1325602I/0001 Project EstablishedICS : 13.030.50, 83.080.01National Ref : E1325602ITitle : Plastic raw-secondary materials - Blends of heterogeneous plastics based on

polyolefins from industrial residue and/or from post consumer materials to be used for conversion into liquid and/or gas fuel - Part 18: Requirements and test methods

Scope : This standard applies to plastic raw-secondary materials from made from recycling of plastics from industrial residue and/or from post consumer materials; it defines the requirements and the tests methods of heterogeneous mixtures base on recycled polyolefins to be used alone or in blends with other materials, for the production of unconventional liquid fuels and / or gas by thermal conversion and / or catalytic (or other equivalent technology).


Page 29


** End of Sector **




Sector S : HEALTH, ENVIRONMENT AND MEDICAL EQUIPMENT


Page 31Subsector S06: VIBRATION & SHOCK

Subsector : S06 Registration Date : 2010-08-10Organization : DINCountry : GermanyProject ID : 00100829/0001 Project EstablishedICS :National Ref : 00100829Title : Mechanical vibration - Resilient elements used in railway tracks - Part 9: Laboratory test

procedures for resilient elements of rail fastening systems and rail supports



Subsector S08: AIR QUALITY

Subsector : S08 Registration Date : 2010-08-10Organization : DINCountry : GermanyProject ID : 09500247/0001 Project EstablishedICS :National Ref : 09500247Title : SWeRF (Size Weighted Respirable Fraction) and SWeRFcs (Size Weighted Respirable

Fraction of Crystalline Silica)



Subsector S09: WATER QUALITY AND WATER SUPPLY

Subsector : S09 Registration Date : 2010-08-10Organization : DINCountry : GermanyProject ID : 11902770/0001 Project EstablishedICS :National Ref : 11902770Title : German standard methods for the examination of water, waste water and sludge -

Sludge and sediments (group S) - Part 14: Determination of selected polyfluorinated compounds (PFC) in sludge, sediment and soil - Method using high performance liquid chromatography and mass spectrometric detection (HPLC-MS/MS) (S 14)


Subsector : S09 Registration Date : 2010-08-12Organization : UNMZ Draft Issue Date : 2010-09-01Country : Czech Republic Latest Date for Comments : 2010-10-31Project ID : 75004610/0001 Project EstablishedICS :National Ref :Title : Water supply - Requirements for systems and components outside buildingsScope : Development of national annex that will contain some supplementary information from

Page 32

Scope : withdrawn national standard ČSN 73 3050 Earth works.

Relatedness :National : REV/AMD Amendment of CSN EN 805 (2001)


Subsector S17: RESPIRATORY PROTECTIVE DEVICES

Subsector : S17 Registration Date : 2010-08-10Organization : DINCountry : GermanyProject ID : 02702344/0001 Project EstablishedICS :National Ref : 02702344Title : Respiratory protective devices - Reactorfilters for protection against radioactive

Methyliodide and radioactive particles - Requirements, testing, marking



Subsector S20: WASTE COLLECTION, HANDLING AND TRANSPORTATION

Subsector : S20 Registration Date : 2010-08-10Organization : DINCountry : GermanyProject ID : 05100735/0001 Project EstablishedICS :National Ref : 05100735Title : Mobile waste containers - Waste containers with two wheels with a capacity from 60 l to

360 l for diamond lifting devices - Amendment A1



Subsector S24: SOIL QUALITY

Subsector : S24 Registration Date : 2010-08-10Organization : DINCountry : GermanyProject ID : 11903001/0001 Project EstablishedICS :National Ref : 11903001Title : Soil quality


Subsector : S24 Registration Date : 2010-08-11Organization : NENCountry : Netherlands

Page 33

Project ID : 50001592/0001 Project EstablishedICS : 13.030.10, 13.080.10National Ref : NEN 6972:2008/A1:2010 Concept nlTitle : Soil quality - Extraction with acetone and petroleum ether for the determination of

organic componentsScope : This standard describes a method for the sample preparation and extraction with acetone.

The method is applicable to soil, sediment and building materials. The extract is suitable for the determination of organic parameters important for NEN 5740.



Subsector S26: ENVIRONMENTAL MANAGEMENT

Subsector : S26 Registration Date : 2010-08-11Organization : NENCountry : NetherlandsProject ID : 50001590/0001 Project EstablishedICS : 13.040.40National Ref : NTA 7379:2010 Concept nlTitle : Guidelines for Predictive emission monitoring systems 9PEMS) - Realization and quality

assuranceScope : In this technical agreement guidance is given for the set up of a PMS and a method for the

quality assurance of a PMS.Quality assurance for PMS for large installations should join in with the systematics of NEN-EN 14181 and strive for CEMS quality level.



Subsector S27: WASTE - CHARACTERIZATION, TREATMENT AND STREAMS

Subsector : S27 Registration Date : 2010-08-11Organization : ASICountry : AustriaProject ID : 00023377/0001 Project EstablishedICS : 13.030.40, 13.030.99National Ref : ÖNORM S 2084Title : Requirements for gas evacuation in landfills and old depositsScope : This ÖNORM sets requirements for gas evacuation for landfills and old deposits in which

due to relevant shares of biodegradable waste gas production is to expect. This applies to landfills with organic waste (household type), landfills for mechanical-biological treatment waste, old deposits (organic reaction potential, formation of landfill gas (methane, carbon dioxide). This ÖNORM describes methods of active and passive degassing.



Subsector S99: UNDETERMINED

Subsector : S99 Registration Date : 2010-08-10

Page 34

Organization : DINCountry : GermanyProject ID : 06301402/0001 Project EstablishedICS :National Ref : 06301402Title : Co-operative use of electronic health records - Part 1: Management summary


Subsector : S99 Registration Date : 2010-08-10Organization : DINCountry : GermanyProject ID : 06301403/0001 Project EstablishedICS :National Ref : 06301403Title : Co-operative use of electronic health records - Part 2: Functional requirements


Subsector : S99 Registration Date : 2010-08-10Organization : DINCountry : GermanyProject ID : 06301404/0001 Project EstablishedICS :National Ref : 06301404Title : Co-operative use of electronic health records - Part 3: Technical services


Subsector : S99 (Secondary Subsector)


Organization : NENCountry : NetherlandsProject ID : 50001588/0001 Project EstablishedICS : 11.020, 35.240.80National Ref : NTA 7508:2010 Concept nlTitle : Health Informatics - Messages in healthcare - Basic structure for messages on medical

microbiology and medical immunologyScope : This technical agreement concerning health informatics is meant for the following users:

health suppliers of medical records software for specialists, suppliers of information systems of general practitioners and developers of laboratory softeware.


Subsector : S99 (Secondary Subsector)


Organization : NEN

Page 35

Country : NetherlandsProject ID : 50001589/0001 Project EstablishedICS : 03.120, 13.160National Ref : NTA 8009:2010 Concept nlTitle : Safety management system for hospitals and institutions which deliver hospital careScope : Gives specifications to set up a system for safety in hospitals for patients and employees.

Gives definitions for safety, responsibilities and the requirements for employees.



** End of Sector **




Sector T : TRANSPORT, MECHANICAL HANDLING AND PACKAGING


Page 37Subsector T01: SHIPBUILDING AND MARITIME STRUCTURES

Subsector : T01 Registration Date : 2010-08-10Organization : DINCountry : GermanyProject ID : 13202244/0001 Project EstablishedICS :National Ref : 13202244Title : Corrosion of metals in sea water and sea atmosphere - Part 1: Definitions, basic

information; Text in German and English


Subsector : T01 Registration Date : 2010-08-10Organization : DINCountry : GermanyProject ID : 13202261/0001 Project EstablishedICS :National Ref : 13202261Title : Corrosion of metals in sea water and sea atmosphere - Part 2: Free corrosion in sea

water


Subsector : T01 Registration Date : 2010-08-10Organization : DINCountry : GermanyProject ID : 13202265/0001 Project EstablishedICS :National Ref : 13202265Title : Corrosion of metals in sea water and sea atmosphere - Part 3: Galvanic corrosion in sea

water; Text in German and English


Subsector : T01 Registration Date : 2010-08-10Organization : DINCountry : GermanyProject ID : 13202266/0001 Project EstablishedICS :National Ref : 13202266Title : Corrosion of metals in sea water and sea atmosphere - Part 4: Corrosion in sea

atmosphere; Text in German and English



Subsector T02: AEROSPACE

Page 38

Subsector : T02 Registration Date : 2010-08-03Organization : BSICountry : United KingdomProject ID : 01002231/0001 Project EstablishedICS :National Ref : BS 3HR 2:2010+A1Title : Specification for nickel-chromium-cobalt-titanium-aluminium heat-resisting alloy billets,

bars, forgings and parts (nickel base, Cr 19.5, Co 18.0, Ti 2.5, Al 1.5)


Subsector : T02 Registration Date : 2010-08-03Organization : BSICountry : United KingdomProject ID : 01002232/0001 Project EstablishedICS :National Ref : BS SP 10 AND 11:1949+A2Title : Specification for washers for aircraft purposes (primarily for facing purposes)


Subsector : T02 Registration Date : 2010-08-03Organization : BSICountry : United KingdomProject ID : 01002233/0001 Project EstablishedICS :National Ref : BS SP 57 AND 58:1955+A3Title : Specifications for rivet burrs for aircraft


Subsector : T02 Registration Date : 2010-08-03Organization : BSICountry : United KingdomProject ID : 01002234/0001 Project EstablishedICS :National Ref : BS SP 122 TO 125:1958+A2Title : Washers for unified hexagons for aircraft (primarily for packing purposes)


Subsector : T02 Registration Date : 2010-08-03Organization : BSICountry : United KingdomProject ID : 01002235/0001 Project EstablishedICS :National Ref : BS SP 126 AND 127:1959+A2

Page 39

Title : Washers for unified hexagons for aircraft (primarily for facing purposes)


Subsector : T02 Registration Date : 2010-08-10Organization : DINCountry : GermanyProject ID : 13114611/0001 Project EstablishedICS :National Ref : 13114611Title : Aerospace - Bolts, with MJ threads, in titanium alloys, strength class 1100 MPa -

Procurement specification (ISO 9152:1998, modified)



Subsector T20: TRAM- AND RAILWAY ENGINEERING

Subsector : T20 Registration Date : 2010-08-10Organization : DINCountry : GermanyProject ID : 08700698/0001 Project EstablishedICS :National Ref : 08700698Title : State of railway vehicles - Basic principles and production technology - Part 6: Welding


Subsector : T20 Registration Date : 2010-08-10Organization : DINCountry : GermanyProject ID : 08700796/0001 Project EstablishedICS :National Ref : 08700796Title : State of railway vehicles - Terms and definitions for the reliable state of railway vehicles



** End of Sector **

2010-08

List of non-electrotechnical subsectors

Sector A: Services

Subsector Title ISO/TC CEN/TC

reference reference

A01 Tourist services / 329; CEN/WS ETO

A02 Cleaning services / 328

A03 Postal services / 331

A04 Transportation services / 320; CEN/WS 016

A05 Maintenance services / 319

A06 Building and construction services / 330

A07 Translation services /

A08 Funeral services / CEN/BT/TF 139

A09 Facility management / 348

A10 Services of Real Estate Agents / CEN/BT/TF 180,

373

A11 Security Services / CEN/BT/TF 167;

391; 384; 370;

CEN/WS 044

A12 Consultancy Services / 395; 381

A99 Undetermined / CEN/WS 002 CEN/WS 004 CEN/WS 037 CEN/WS 039 CEN/WS 041 CEN/WS 051 375; 374; 376; 385 404

Sector B: Building and construction


reference reference

B01 Fire protection 21 70; 72; 191; 192

B02 Structures 59; 98 166; 167; 250; 277;

346; 349 284; 288; 297; 340;

B03 Concrete 71 104; CEN/WS 009

B04 Cement 74; 77 51

B05 Fire tests 92 127

B06 Gypsum / 241

B07 Glass 160 129

B08 Doors and windows 162 33

B09 Thermal matters 163 88; 89; 371

CEN/BT WG 173 CEN/WS 036

B10 Timber structures 165 124

B11 Metal structures 167 135

B12 Masonry 179; 196 125; 246

B13 Solar energy 180 312

B14 Geotechnics 182 341; 396

B15 Sanitary appliances / 163; 7

B16 Taps / /

B17 Lighting equipment and lighting / 50; 169 application technology

B18 Scaffolding / 53

B19 Ceramic tiles 189 67

B20 Drainage equipment / 165

B21 Baths / /

B22 Wallcoverings / 99

B23 District heating / 107

B24 Auxiliary and handicraft work / /

B25 Gas distribution installation and / 234; 235; 282 related equipment

B26 Road building and maintenance / 178; 227

B27 Waterproofing materials / 128; 254; 361; 314

B28 Floor coverings 38/SC 12 134

B29 Aggregates / 154

B30 Floor and surfacing / 217; 303; 323; 390

B31 Heating systems in buildings / 228; 247

B32 Precast concrete products / 177; 229 B33 Building design 205 315; 325; 388

B34 Building and construction – Environmental aspect 350; 351

B99 Undetermined / /

Sector C: Chemicals, chemical engineering and food products


reference reference

C01 Food products 34 174; 275; 302; 360 307; 327; 338; 387 CEN/WS 008 CEN/WS 018

C02 Paints and related products 35 139; 298; 173

C03 Chemistry 47 317; 363

C04 Laboratory glassware 48 332

C05 Lac / /

C06 Essential oils 54 /

C08 Pesticides 81 /

C09 Surfactants 91 276

C10 Starch 93 /

C11 Tobacco 126 401

C12 Glass plant / /

C13 Fertilizers 134 223; 260

C16 Wood preservatives / /

C17 Trees and plants / /

C18 Adhesives / 193

C19 Chemical analysis 201; 202 382; 347

C20 Explosives and firework / 212; 321

C21 Cosmetics 217 392

C99 Undetermined / 386

Sector F: Fundamental standards


reference reference

F01 Technical drawings 10 /

F02 Units & symbols 12 /

F03 Preferred numbers 19 /

F04 Sieves 24 /

F05 Measuring instruments 30; 113 92; 171; 176; 237;

294; 318; 244; 367 141; CEN/WS 011

F06 Terminology principles 37 /

F07 Documentation and information 46 304; CEN/WS 024 CEN/WS 010 CEN/WS 023 CEN/WS 028 CEN/WS 014 CEN/WS 050 CEN/WS 006 368

F08 Surfaces / 290

F09 Banking 68 /

F10 Statistics 69 /

F12 Information processing systems 204 224; 225; 251; 278; CEN/WS CPF CEN/WS CIS CEN/WS ODR CEN/WS CID 287; 311; 365

F13 Environmental tests / /

F14 Graphical technology, 130 / sign-boards and nameplates

F15 Material testing in general 135 138; CEN/WS 007 CEN/WS 021 CEN/WS 033

F16 Graphical symbols 145 /

F17 Administrative documents 154 CEN/WS MMU

F18 Micrographics 171 /

F19 Optics 172; 187 123; 170

F20 Quality assurance 176 CEN/CLC/TC1 CEN/CLC/WG QS CEN/WS 030 362

F21 Value analysis and project / 279 network

F22 Logistics / 379; 273

F23 Energy 203 CEN/CLC/JWG 3 CEN/CLC/JWG 4 CEN/WS 027

F99 Undetermined / 389

Sector H: Products for household and leisure use


reference reference

H01 Cinematography 36 372

H02 Photography 42 /

H03 Consumer questions / 291

H04 Sports equipment 83 136

H05 Oil and gas burners / 47; 131

H06 Horology 114 /

H07 Space heating 116 62; 110; 130; 179; 180

H08 Sizing systems 133; 137 /

H09 Furniture 136 207

H10 Sewing machines 148 /

H11 Heater controls 161 58

H12 Ceramic and glass-ware for food 166 /

H13 Jewellery 174 CEN/WS 047

H14 Caravans 177 245

H15 Toys 181 52

H17 Oil stoves / 46

H18 Central heating boilers / 48; 57; 109; 269

H19 Non-electric cookers and barbecues / 49; 281; 295

H22 Smokers’ lighters and matches / 355; 87

H23 Ladders / 93

H24 Tactile danger warnings / /

H25 Large gas appliances / 106; CEN/CLC/JWG FCGA

H26 Sealing materials / 108; 208

H27 Educational equipment / /

H28 Hunting 191 /

H29 Heat pumps / 113

H30 Equipment for children / 252

H31 Dedicated LPG appliances / 181

H32 Culinary utensils 186 194

H33 Footwear (excluding protective / 309 footwear)

H34 Child safety / CEN/BT/WG 117 398

H99 Undetermined / 299; 364; 369; 402

Sector I: Mechanical engineering


reference reference

I01 Screw threads 1 /

I02 Fasteners 2 185

I03 Limits & fits / /

I04 Rolling bearings 4 /

I05 Iron pipes 5 203

I06 Pressure vessels 11 54

I07 Shafts 14 /

I08 Agricultural machines 23 144, 334

I09 Small tools 29 213

I10 Splines / /

I11 Machine tools 39 142; 143; 145; 255

I12 Pulleys & belts 41 188

I13 Gas containers 58 23; 286

I14 Gears 60 /

I15 Equipment for petroleum industry 67 12

I16 Internal combustion engines 70; 192 270

I17 Machinery in general 72; 199 114; 153; 214; 313 (including safety) 271, 337; 399; 397 CEN/WS 025

I18 Mining 82 196

I19 Nuclear energy 85 /

I20 Refrigeration 86 44; 182

I21 Chains and chain wheels 100 /

I22 Vacuum technology 112 /

I23 Pumps 115 197

I24 Industrial fans 117 356

I25 Compressors 118 232

I26 Plain bearings 123 /

I27 Earth moving and construction 127; 195 151 equipment

I28 Fluid power 131 /

I29 Gas cleaning / 195

I30 Air distribution / 156

I31 Valves 153; 185 69; 236; 105

I32 Flanges / 74

I33 Information processing in 184 310 automation

I34 Non-ferrous metallic pipes / /

I35 Leisure and recreational machines / 152

I36 Thermoprocessing technology / 186

I37 Printing and paper machines / 198

I38 Leather production, tannery and / 200; 201 related machinery

I39 Machines for metal processing / 202; 322

I40 Industrial piping networks / 267

I41 Membrane filters / 272

I42 Potentially explosive atmospheres / 305

I43 Hydrogen energy 197 /

I44 Nanotechnologies 229 352

I99 Undetermined / CEN/CLC/JTF PE; CEN/CLC/TC 2

65, 157

Sector M: Metallic materials


reference reference

M01 Steel 17 CEN/TC 342; 344; ECISS/TC 6 ECISS/TC 7 ECISS/TC 9 ECISS/TC 10 ECISS/TC 11 ECISS/TC 12 ECISS/TC 13 ECISS/TC 15 ECISS/TC 19 ECISS/TC 20 ECISS/TC 21 ECISS/TC 22 ECISS/TC 23 ECISS/TC 24 ECISS/TC 26 ECISS/TC 27 ECISS/TC 28 ECISS/TC 29 ECISS/TC 5 ECISS/TC 14 ECISS/TC 100 ECISS/TC 102 ECISS/TC 103 ECISS/TC 104 ECISS/TC 105 ECISS/TC 106 ECISS/TC 107 ECISS/TC 108 ECISS/TC 109 ECISS/TC 110

M02 Zinc / 209

M03 Foundry technology, 25 190; ECISS/TC 31 ECISS/TC 111 including cast iron

M04 Copper 26 133

M05 Welding 44 121

M06 Dimensions of wrought products / /

M07 Manganese and chromium 65 /

M08 Light alloys 79 132

M09 Iron ores 102 /

M10 Metallic coatings 107 240

M11 Powder metallurgy 119 /

M12 Aluminium ores 129 /

M13 Ferroalloys 132 /

M14 Nickel 155 /

M15 Metallic corrosion 156 262; 219

M16 Mechanical tests for metals 164 ECISS/TC 1 ECISS/TC 2 ECISS/TC 101

M17 Heavy metal ores 183 /

M18 Metal wire products / ECISS/TC 30 CEN/BT/TF 196

378

M20 Tin and tin alloys / 220

M21 Precious metals / 283

M22 Lead and lead alloys / 306

M99 Undetermined / /

Sector N: Non-metallic materials


reference reference

N01 Paper and board 6 172

N02 Solid fuels 27 335; 343;383 CEN/WS 019

N03 Petroleum products 28 19; 336 CEN/WS 038

N04 Refractories 33 187

N05 Textiles 38 189; 248

N06 Rubber 45 218; 366 CEN/WS 003

N07 Sawn timber 55 38; 175

N08 Mica / /

N09 Plastics 61 249

N10 Cork 87 /

N11 Wood-based panels 89 112

N12 Timber products 99 /

N13 Leather 120 289

N14 Plastics pipes 138 155

N17 Fluorspar 175 /

N18 Glass-fibre reinforced plastics / /

N19 Tapes / 253

N20 Ceramics 206 184

N21 Gaseous fuels and combustible gas 158; 193 238

N22 Feather and related materials / 222

N99 Undetermined / /

Sector S: Health, environment and medical equipment


reference reference

S01 Acoustics and sound 43 126; 211 insulation

S02 Transfusion equipment 76 /

S03 Syringes 84 /

S04 Protective clothing and equipment 94 85; 158; 159; 160; 161; 162 CEN/WS 026

S05 Dentistry 106 55

S06 Vibration & shock 108 231

S07 Anaesthetic and respiratory 121 215 equipment

S08 Air quality 146 137; 243; 264; CEN/CLC WG/CMI

S09 Water quality and water supply 147 164; 230; CEN/WS 001 CEN/WS 034

S10 Surgical implants 150 285; CEN/CLC JWG/AIMD

S11 Contraceptives 157 /

S12 Gas analysis / /

S13 Ergonomics 159 122

S14 Prosthetics 168 /

S15 Surgical instruments 170 /

S16 Aids for the disabled 173 293

S17 Respiratory protective devices / 79

S18 Sterilization of equipment 198 102; 204

S19 First aid equipment and rescue systems / 239

S20 Waste collection, handling and / 183 transportation

S21 Laboratory medicine, clinical 194 140; 206; 233; pathology and biosafety 257; 258; 316 CEN/CLC/TC 3 CEN/WS 031 CEN/WS 053

S22 Energy saving / CEN/WS 005 CEN/WS 015

S23 Personal & property protection against aggression/Burglary protection / 263

S24 Soil quality 190 345; CEN/WS 032

S25 Chemical disinfectants and / 216 antiseptics

S26 Environmental management 207 CEN/WS 040

S27 Waste - Characterization, treatment / 292; 308; and streams CEN/BT/TF 120

S28 Demining / CEN/WS 029 CEN/WS 013

S99 Undetermined / 205; CEN/BT/TF 127 394; 259; 357; 358; 359; 380; 400; 403 CEN/WS PCEC CEN/WS 012 CEN/WS 020

Sector T: Transport, mechanical handling and packaging


reference reference

T01 Shipbuilding and maritime 8; 188 15; 300 structures

T02 Aerospace 20 274; AECMA; ECSS 377

T03 Road vehicles 22 301; 326 CEN/WS IMA

T04 Tyres 31 /

T05 Pallets 51 /

T06 Metal and plastic containers 52 210; 221; 265; 266; 268; 296 393

T07 Glass containers 63 /

T08 Cranes 96 147

T09 Materials handling and 101 148; 149 storage equipment

T10 Freight containers 104 119; 280

T11 Steel wire ropes 105 /

T12 Industrial trucks 110 150; 324

T13 Lifting chains, hooks and ropes 111 168

T14 Packaging 122 261; 120

T15 Cycles 149 333

T16 Lifts & escalators 178 10; 242

T17 Builders hoists / /

T18 Elevating platforms / 98

T19 Road safety / 226; 339

T20 Tram- and railway engineering / 256; / CEN/CLC WG/FPR

T21 Packaging machines / 146

T22 Off-road vehicles / 354

T99 Undetermined / CEN/WS TAF

Sector Z: Information technology


Z01 Radiocommunication for IT / /

Z02 Telephony, telegraphy for IT / CEN/CLC - ETSI

Z03 Common O.S.I. activities / CEN/CLC - EWOS

Z99 Undetermined / 353; CEN/WS DFA CEN/WS DIR CEN/WS EBES CEN/WS ECH CEN/WS ECO CEN/ES EFI CEN/WS ESI CEN/WS FAS CEN/WS FUN CEN/WS IEC CEN/WS JXF CEN/WS LCT CEN/WS LTS CEN/WS MDC CEN/WS MET CEN/WS POR CEN/WS URI CEN/WS XFS CEN/WS ORC CEN/WS CTC CEN/WS XML CEN/WS MEE CEN/WS SCE CEN/WS MES CEN/WS UDP CEN/WS MMI CEN/WS FS2 CEN/WS AUT CEN/WS ICT CEN/WS KMA CEN/WS TEX CEN/WS SAN CEN/WS DPP CEN/WS HIC CEN/WS MLX CEN/WS eGO CEN/WS BII CEN/WS ADN CEN/WS CAT CEN/WS CST CEN/WS DIS CEN/WS ESR CEN/WS EUR CEN/WS FIN CEN/WS GEN CEN/WS ISD CEN/WS NEA CEN/WS NOM

CEN/WS QIS CEN/WS TWE CEN/WS WAC CEN/WS eIN CEN/WS ePR

Documents

Monthly Notifications Register - 31.45.242.21831.45.242.218/pdf/MNR/201008CENmnr.pdf · National annex to Eurocode 1 - Actions on structures - Part 3: ... ÖNORM EN 1337-10 and ÖNORM