Monthly Notifications Register - SUTN...Title : Maintenance - Specific terminology for the group transportation field Scope : The standard gives guidance to the group transportation

Information procedure Page 1

Monthly Notifications Register

Notifications registered at CCMC from 2013-01-01 to 2013-01-31

Register issued on : 2013-02-06

A list of subsectors can be found at the end of this document.




Sector A : SERVICES


Subsector A03: POSTAL SERVICES

Subsector : A03 Registration Date : 2013-01-25Organization : AFNORCountry : FranceProject ID : FA181589/0001 Project EstablishedICS :National Ref : PR NF D 27-402Title : Letter boxes others than those with large opening - Indoor installations

Relatedness :National : New

Subsector : A03 Registration Date : 2013-01-25Organization : AFNORCountry : FranceProject ID : FA181590/0001 Project EstablishedICS :National Ref : PR NF D 27-404Title : Letter boxes with large opening recommanded for dwelling places and covered by order

1802 of June 29, 1979 - Indoor installations


Subsector : A03 Registration Date : 2013-01-25Organization : AFNORCountry : FranceProject ID : FA181591/0001 Project EstablishedICS :National Ref : PR NF D 27-405Title : Letter boxes with large opening recommanded for dwelling places and covered by order

1802 of June 29, 1979 - Outdoor installations


Subsector : A03 Registration Date : 2013-01-25Organization : AFNORCountry : FranceProject ID : FA181592/0001 Project EstablishedICS :National Ref : PR NF D 27-407Title : Letter boxes with reduced capacity and with large opening for indoor installation -

Requirements and testing


Subsector : A03 Registration Date : 2013-01-25Organization : AFNORCountry : FranceProject ID : FA181593/0001 Project EstablishedICS :National Ref : PR NF D 27-408Title : Letter boxes with reduced capacity and with large opening for outdoor installation -

Requirements and testing


** End of Subsector **

Subsector A05: MAINTENANCE SERVICES

Subsector : A05 Registration Date : 2013-01-07Organization : UNICountry : ItalyProject ID : 49040670/0001 Project EstablishedICS : 03.080.10National Ref : U49040670Title : Maintenance - Maintenance ratios for the group transportation fieldScope : The standard gives guidance to the group transportation field by road or by railways, for

the proper application of the ratios included in the UNI EN15341, enlarged, explained or simplified following the specific exigences.

Relatedness :National : REV/AMD UNI 11134:2005

Subsector : A05 Registration Date : 2013-01-07Organization : UNICountry : ItalyProject ID : 49040700/0001 Project EstablishedICS : 01.040.01National Ref : U49040700Title : Maintenance - Specific terminology for the group transportation fieldScope : The standard gives guidance to the group transportation field by road or by railways, for

the proper application of the basic terminology. The basic terminology is enlarged, explained or simplified following the specific exigencies.



Subsector A06: BUILDING AND CONSTRUCTION SERVICES

Subsector : A06 Registration Date : 2013-01-14Organization : ASICountry : AustriaProject ID : 00025526/0001 Project EstablishedICS : 91.100.25National Ref : ÖNORM B 3200Title : Clay masonry elements - Requirements, tests, classification and marking -

Title : Complementary provisions to ÖNORM EN 771-1Scope : The scope of this Austrian Standard covers all factory-made masonry bricks for load-

bearing masonry according to ÖNORM B 1996 (all Parts) and ÖNORM EN 1996 (all Parts) (EUROCODE 6) as well as all factory-made masonry bricks for non-load-bearing masonry according to ÖNORM B 3358-1 and -2, intended for production of masonry elements in building construction and civil engineering.



Subsector A11: SAFETY AND SECURITY

Subsector : A11 Registration Date : 2013-01-22Organization : TSECountry : TurkeyProject ID : tst91153/0001 Project EstablishedICS : 03.080.30, 39.040.01National Ref :Title : Competent services – Microprocessor Controlled Voltage Regulators – RulesScope : This standard includes microprocessor controlled voltage regulators competent services’

rules about technical equipment, operation management, structural situation and functions of staff


Subsector : A11 Registration Date : 2013-01-22Organization : TSECountry : TurkeyProject ID : tst91155/0001 Project EstablishedICS : 03.080.30, 39.040.01National Ref :Title : Competent services – Satellite Based Positioning Equipments – RulesScope : This standard includes satellite based positioning equipments competent services’ rules

about technical equipment, operation management, structural situation and functions of staff


Subsector : A11 Registration Date : 2013-01-22Organization : TSECountry : TurkeyProject ID : tst91224/0001 Project EstablishedICS : 03.080.30, 91.140.90National Ref :Title : Competent services – Rules for Control Panels or Control Boards used in Elevators,

Escalators and Passenger ConveyorsScope : This standard includes Control Panels or Control Boards used in Elevators, Escalators and

Passengers Conveyors competent services’ rules about technical equipment, operation management, structural situation and functions of staff


Subsector : A11 Registration Date : 2013-01-22Organization : TSECountry : TurkeyProject ID : tst91285/0001 Project EstablishedICS : 03.080.30, 29.120.70National Ref :Title : Competent services – Rules for Electronic and Electromagnetic Relays and Control

equipments (Temperature, Humidity, Speed, Counter, Axis)Scope : This standard includes Rules for Electronic and Electromagnetic Relays and Control

Equipments (Temperature, Humidity, Speed, Counter, Axis) competent services’ rules about technical equipment, operation management, structural situation and functions of staff


Subsector : A11 Registration Date : 2013-01-22Organization : TSECountry : TurkeyProject ID : tst91286/0001 Project EstablishedICS : 03.080.30, 91.140.90National Ref :Title : Competent services – Rules for Control Panels or Control Boards used in Elevators,

Escalators and Passenger ConveyorsScope : This standard includes Control Panels or Control Boards used in Elevators, Escalators and

Passengers Conveyors competent services’ rules about technical equipment, operation management, structural situation and functions of staff



Subsector A99: UNDETERMINED

Subsector : A99 Registration Date : 2013-01-24Organization : TSECountry : TurkeyProject ID : t1010836/0001 Project EstablishedICS : 03.080.30, 67.120.10National Ref :Title : Work places - Meat products manufacturing places - General rulesScope : This standard places of manufactured meat products, structural features, management,

employees, covers the general requirements on the features and technical equipment.


Subsector : A99 Registration Date : 2013-01-24Organization : TSE

Country : TurkeyProject ID : t3008358/0001 Project EstablishedICS : 03.080.30National Ref :Title : Work places - Pest control in houses, work places and residential areas - General rules Scope : This standard, home, workplace and residential area pest (pest) will provide businesses

struggle with physical structure, technical equipment, management, and employees of the properties of the principles and procedures includes rules for spraying.



** End of Sector **




Sector B : BUILDING AND CONSTRUCTION


Subsector B01: FIRE PROTECTION

Subsector : B01 Registration Date : 2013-01-18Organization : SFS Draft Issue Date : 2012-12-14Country : Finland Latest Date for Comments : 2013-02-15Project ID : 0000E289/0001 Draft for public enquiryICS :National Ref :Title : Characteristics and requirement levels of smoke control dampers in different

applications


Subsector : B01 Registration Date : 2013-01-18Organization : SFS Draft Issue Date : 2012-12-14Country : Finland Latest Date for Comments : 2013-02-15Project ID : 0000E290/0001 Draft for public enquiryICS :National Ref :Title : Characteristics and requirement levels of smoke duct sections in different applications


Subsector : B01 Registration Date : 2013-01-21Organization : EVSCountry : EstoniaProject ID : 00112228/0001 Project EstablishedICS : 13.220, 13.220.40National Ref : prEVS 620-6 Title : Fire safety - Textiles and textile productsScope : Standard specifies fields of application of textile furnishing materials for different room

functions, depending on burning behaviour classification of textile.

Relatedness :National : REV/AMD EVS 620-6:2003

Subsector : B01 Registration Date : 2013-01-21Organization : EVSCountry : EstoniaProject ID : 00112229/0001 Project EstablishedICS : 13.220.50, 91.040.01, 91.140.30National Ref : prEVS 812-2 Title : Fire safety of constructions - Part 2: Ventilation systemsScope : Standard specifies fire safety requirements for design, construction and maintenance of

ventilation systems in buildings. Covered are ventilation systems for several fire-protection compartments and considered are existing Estonian construction norms experience and climatic situation.


Subsector : B01 Registration Date : 2013-01-21Organization : EVSCountry : EstoniaProject ID : 00112230/0001 Project EstablishedICS : 13.220.01, 91.040.20National Ref : prEVS 812-5 Title : Fire safety of constructions. Part 5: Gas stations, fuel tanks and oil product storageScope : Standard provides the technical solution for design and installation stationary fuel

containers and tanks. Its specifies the distances between fuel containers and tanks and filling station fire fighting systems levels. The object of this standard is also to provide technical solutions for fuel terminals from the point of fire safety.


Subsector : B01 Registration Date : 2013-01-28Organization : BSICountry : United KingdomProject ID : 01203927/0001 Project EstablishedICS :National Ref : BS 5446-3Title : Fire detection and fire alarm devices for dwellings. Specification for

smoke alarm kits for deaf and hard of hearing people


Subsector : B01 Registration Date : 2013-01-17Organization : DINCountry : GermanyProject ID : 03100804/0001 Project EstablishedICS :National Ref : 03100804Title : Fire fighting and rescue service vehicles - Vehicles for roller containers - General

requirements


Subsector : B01 Registration Date : 2013-01-02Organization : NENCountry : NetherlandsProject ID : 50001795/0001 Project EstablishedICS : 13.220.50National Ref : NEN 6068:2012 Concept nlTitle : Determination of the resistance to fire movement between spacesScope : This standard gives a method for the determination of the resistance to fire movement

between spaces. This standard is applicable for the determination to fire movement between spaces in buildings.



Subsector B02: STRUCTURES

Subsector : B02 Registration Date : 2013-01-14Organization : ASICountry : AustriaProject ID : 00025525/0001 Project EstablishedICS : 91.010.30National Ref : ÖNORM B 1800Title : Determination of areas and volumes of buildingsScope : This Austrian Standard shall be applied jointly with ÖNORM EN 15221-6 for Determination

of areas and volumes of buildings. Case-specific and geometry-detailed issues have to be solved in accordance with the principles of this Standard.


Subsector : B02 Registration Date : 2013-01-18Organization : UNMZ Draft Issue Date : 2013-02-01Country : Czech Republic Latest Date for Comments : 2013-03-31Project ID : 73009412/0001 Project EstablishedICS :National Ref :Title : Designing of roofs - Basic provisionsScope : The aim of the modification is unification of related Czech standards using new

information for designing of roofs

Relatedness :National : REV/AMD CSN 73 1901 (2011)


Subsector B03: CONCRETE

Subsector : B03 Registration Date : 2013-01-14Organization : LSTCountry : LithuaniaProject ID : 10001243/0001 Project EstablishedICS : 91.100.30National Ref :Title : Concrete. Test methods. Determination of frost resistance by one - sided freezingScope : This standard applies to normal concrete and concrete products with surface finishing (eg.

facades, retaining walls, caches, etc.) determination of frost resistance by one - sided freezing


Subsector : B03 Registration Date : 2013-01-18Organization : UNMZ Draft Issue Date : 2013-02-01Country : Czech Republic Latest Date for Comments : 2013-03-31Project ID : 73006912/0001 Project EstablishedICS :

National Ref :Title : Loading test of celular concrete building elementsScope : The aim of the revision is specification of loading test of celular concrete building elements


Subsector : B03 Registration Date : 2013-01-18Organization : UNMZ Draft Issue Date : 2013-02-01Country : Czech Republic Latest Date for Comments : 2013-03-31Project ID : 73009712/0001 Project EstablishedICS :National Ref :Title : Concrete - Specification, performance, production and conformityScope : The aim of the modification is unification of National Annex on CSN EN 206-1 using new

information for specification, performance, production and conformity of concrete

Relatedness :National : REV/AMD CSN EN 206-1 (2001)


Subsector B05: FIRE TESTS

Subsector : B05 Registration Date : 2013-01-18Organization : UNMZ Draft Issue Date : 2013-02-01Country : Czech Republic Latest Date for Comments : 2013-03-31Project ID : 34001612/0001 Project EstablishedICS :National Ref :Title : Fire protection and fire alarm systems - Guidelines for planning, gesign, installation,

commisioning, checks use and maintenanceScope : The aim of the modification is unification of related Czech Standards using of new

information for fire protection and fire alarm systems in buldings.



Subsector B07: GLASS

Subsector : B07 Registration Date : 2013-01-22Organization : TSECountry : TurkeyProject ID : tst90633/0001 Project EstablishedICS : 81.040.30National Ref :Title : Evacuated tube solar collectors manufactured from borosilicate glass- Used for water

heating applicationsScope : This standard covers descriptions, classification , requirements for safety measures,

strength, and insulaton provided by convection and radiation heat transfer principles, inspections and tests for evacuated tube solar collectors(ETC), which were manufactured from borosilicate glass 3.3, used in water heating applications. It does not cover flat plate solar collectors (FPC). It also does not specify heat pipe- type ETCs used for other water

Scope : and space heating applications.



Subsector B08: DOORS AND WINDOWS

Subsector : B08 Registration Date : 2013-01-14Organization : ASICountry : AustriaProject ID : 00025522/0001 Project EstablishedICS : 91.010.30, 91.060.50, 91.090National Ref : ÖNORM B 5320Title : Fitting for windows, door height windows and doors in external construction elements -

Principles for design, execution of work and materialScope : This Austrian Standard shall be applied to the design and execution for fitting of windows,

door height windows and external doors in conditioned and non-conditioned buildings or building parts being in direct contact to external climate. Furthermore, this Standard also applies to the fitting of windows between conditioned and non-conditioned rooms. Hereinafter, windows, door height windows and external doors will be shortly referred to as "windows. This Austrian Standard applies to new construction, rehabilitation as well as to the exchange of windows. The present ÖNORM neither covers repair and/or reconstruction of existing windows, nor works in the field of monument protection. Moreover, the present ÖNORM is not applicable to roof windows, roof lights, etc. For fire protection requirements, the applicability has to be checked for each specific case. This Standard does not deal with connection joints within coupled window constructions; these have to fulfil the requirements of ÖNORM B 5300.


Subsector : B08 Registration Date : 2013-01-28Organization : BSI Draft Issue Date : 2013-01-22Country : United Kingdom Latest Date for Comments : 2013-03-31Project ID : 01203920/0001 Draft for public enquiryICS :National Ref : BS 6375-3:2009+A1Title : Performance of windows and doors. Classification

for additional performance characteristics and guidance on selection and specification. Amendment


Subsector : B08 Registration Date : 2013-01-28Organization : BSICountry : United KingdomProject ID : 01203921/0001 Project EstablishedICS :National Ref : BS 8607

Title : Mechanically operated digital locks. Requirements and test methods



Subsector B09: THERMAL MATTERS

Subsector : B09 (Secondary Subsector)

Registration Date : 2013-01-22

Organization : TSECountry : TurkeyProject ID : tst90633/0001 Project EstablishedICS : 81.040.30National Ref :Title : Evacuated tube solar collectors manufactured from borosilicate glass- Used for water


strength, and insulaton provided by convection and radiation heat transfer principles, inspections and tests for evacuated tube solar collectors(ETC), which were manufactured from borosilicate glass 3.3, used in water heating applications. It does not cover flat plate solar collectors (FPC). It also does not specify heat pipe- type ETCs used for other water and space heating applications.



Subsector B12: MASONRY

Subsector : B12 Registration Date : 2013-01-25Organization : AFNORCountry : FranceProject ID : FA181579/0001 Project EstablishedICS :National Ref : PR NF DTU 20.1 P1-1Title : Building works - Small masonry unit walls - Part 1-1 : Technical specifications


Subsector : B12 Registration Date : 2013-01-25Organization : AFNORCountry : FranceProject ID : FA181580/0001 Project EstablishedICS :National Ref : PR NF DTU 20.1 P1-2Title : Building works - Small masonry unit walls - Part 1-2 : General criteria for choice of

materials

Relatedness :

National : New

Subsector : B12 Registration Date : 2013-01-25Organization : AFNORCountry : FranceProject ID : FA181581/0001 Project EstablishedICS :National Ref : PR NF DTU 20.1 P2Title : Building works - Small masonry unit walls - Part 2 : Contract bill of special clauses



Subsector B13: SOLAR ENERGY

Subsector : B13 (Secondary Subsector)

Registration Date : 2013-01-22

Organization : TSECountry : TurkeyProject ID : tst90633/0001 Project EstablishedICS : 81.040.30National Ref :Title : Evacuated tube solar collectors manufactured from borosilicate glass- Used for water


strength, and insulaton provided by convection and radiation heat transfer principles, inspections and tests for evacuated tube solar collectors(ETC), which were manufactured from borosilicate glass 3.3, used in water heating applications. It does not cover flat plate solar collectors (FPC). It also does not specify heat pipe- type ETCs used for other water and space heating applications.



Subsector B14: GEOTECHNICS

Subsector : B14 Registration Date : 2013-01-04Organization : ISRM

Country :Former Yugoslav Republic of Macedonia

Project ID : 00042146/0001Project

EstablishedICS : 93.020National Ref : prМКС 1004:2012Title : Geotechnical investigation and testing – Field testing – Determination of bulk density -

Sand-Cone methodScope : This Macedonian standard describes the procedure for determination of soil bulk density

with Sand-Cone method in field conditions.Estimation of soil compaction and verification

Scope : of density during execution of earthworks and construction civilengineering structures


Subsector : B14 Registration Date : 2013-01-25Organization : AFNORCountry : FranceProject ID : FA174709/0001 Project EstablishedICS :National Ref : PR NF P94-281Title : Geotechnical design - Retaining structures - Gravity walls



Subsector B18: SCAFFOLDING

Subsector : B18 Registration Date : 2013-01-28Organization : BSICountry : United KingdomProject ID : 01203942/0001 Project EstablishedICS :National Ref : BS 1139-2.2:2009+A1Title : Metal scaffolding. Couplers. Aluminium couplers and special

couplers in steel. Requirements and test methods. Amendment



Subsector B20: DRAINAGE EQUIPMENT

Subsector : B20 Registration Date : 2013-01-14Organization : ASICountry : AustriaProject ID : 00025529/0001 Project EstablishedICS : 13.060.99National Ref : ÖNORM B 5101Title : Separator systems for light liquids (e.g. oil and petrol) - Supplementary requirements to

ÖNORMEN EN 858-1 and -2Scope : This standard includes additional requirements for ÖNORM EN 858-1 as well as the proof of

conformity of products according to ÖNORM EN 858-1 and -2, where fuel oil according to ISO 8217, named ISO-D-DMA (without addition of biogene substrates), is determined as testing fluid. This standard can be used for a maximum addition of 10 % (mass) of biogene components to fossil fuels. For higher percentages the performance of cleaning, the durability of materials and the necessity of manual shut-off valve after site has to be considered separately.


Subsector : B20 Registration Date : 2013-01-17Organization : DINCountry : GermanyProject ID : 11903607/0001 Project EstablishedICS : 23.040.50National Ref : DIN 4266-3Title : Drainage pipes for landfills - Part 3: Drainage pipes and fittings and their joints made

from concrete



Subsector B25: GAS DISTRIBUTION INSTALLATION AND RELATED EQUIPMENT

Subsector : B25 Registration Date : 2013-01-04Organization : ISRM


Project ID : 00042968/0002Draft for public

enquiryICS : 91.140.40National Ref : prМКС 1007:2012Title : Gas pipelines and fittings indication labelsScope : This standard specifies requirements for indication labels for gas pipelines and fittings.


Subsector : B25 Registration Date : 2013-01-07Organization : UNICountry : ItalyProject ID : 01049470/0001 Project EstablishedICS : 91.140.40National Ref : E01049470Title : LPG plants for domestic use not fed by a distribution network - Design, installation,

service and maintenanceScope : This standard describes criteria for the design, installation, operation and maintenance of

LPG for domestic and similar use not fed by a distribution network, including the installation and replacement of LPG cylinders used in the users served. Such plants can be fed from a single LPG cylinder, by more LPG cylinders connected to each other, or by a deposit of LPG for domestic use.



Subsector B26: ROAD BUILDING AND MAINTENANCE

Subsector : B26 Registration Date : 2013-01-10Organization : SNV Draft Issue Date : 2013-01-08Country : Switzerland Latest Date for Comments : 2013-02-15Project ID : CH130001/0001 Draft for public enquiry

ICS : 93.020National Ref : SN 640492Title : Foundation layers of

asphalt concrete in cold construction; requirements to the mix, designing, execution requirements of the built-in layers

Relatedness :National : REV/AMD SN 640506a (1995)


Subsector B27: WATERPROOFING MATERIALS

Subsector : B27 Registration Date : 2013-01-29Organization : UNICountry : ItalyProject ID : 87026620/0001 Project EstablishedICS : 91.060.20National Ref : U87026620Title : Criteria for design, execution, testing and maintenance of roof gardenScope : The standard establishes criteria for design, execution, testing and maintenance of roof

garden, in respect of environmental parameters, type of construction and intended use of a building. Requirements, classification criteria and functional layer are also specified. Materials and components commonly used according the current state of art are described.


Subsector : B27 Registration Date : 2013-01-25Organization : AFNORCountry : FranceProject ID : FA181584/0001 Project EstablishedICS :National Ref : PR NF DTU 52.2 P1-1-1/A1Title : Building works - Ceramics and similars tiles fixing with adhesives - natural stones - Part

1-1-1 : Contract bill of technical model clauses for inside walls


Subsector : B27 Registration Date : 2013-01-02Organization : TSECountry : TurkeyProject ID : tst02810/0001 Project EstablishedICS : 91.100.50, 91.120.30National Ref :Title : Jointing materials for construction and expansion joints in concrete work – Rubber

waterstopsScope : This standard covers the general properties of rubber waterstops used as a jointing

materials for construction and expansion joints in concrete work


International : Modified ASTM D 2240:2010




Relatedness :National : NewInternational : Modified ASTM D 395:2008










Subsector B28: FLOOR COVERINGS

Subsector : B28 Registration Date : 2013-01-25Organization : AFNORCountry : FranceProject ID : FA181582/0001 Project EstablishedICS :National Ref : PR NF DTU 54.1 P1-2/A1

Title : Building works - Cast in situ synthetic resin flooring - Part 1-2 : General criteria for selection of materials



Subsector B30: FLOOR AND SURFACING

Subsector : B30 Registration Date : 2013-01-25Organization : AFNORCountry : FranceProject ID : FA181583/0001 Project EstablishedICS :National Ref : PR NF DTU 26.2 P1-1/A1Title : Building works - Screeds and slabs with a base of hydraulic binders - Part 2: Contract

bill of special administrative model clauses


Subsector : B30 Registration Date : 2013-01-25Organization : AFNORCountry : FranceProject ID : FA181782/0001 Project EstablishedICS :National Ref : PR NF P90-152Title : INFILL FOR SYNTHETIC TURF RESISTANCE TO WEARING INFILL FOR

SYNTHETIC TURF RESISTANCE TO WEARING INFILL FOR SYNTHETIC TURF RESISTANCE TO WEARING INFILL FOR SYNTHETIC TURF RESISTANCE TO WEARING



Subsector B32: PRECAST CONCRETE PRODUCTS

Subsector : B32 Registration Date : 2013-01-08Organization : LSTCountry : LithuaniaProject ID : 10000911/0001 Project EstablishedICS : 91.100.30National Ref :Title : Foundation blocks – SpecificationsScope : 1.1 This standard is for solid foundation and basement wall units (hereinafter - blocks),

which are manufactured from normal and lightweight concrete conforming to LST EN 206-1 and LST 1974 requirements. 2.1 The blocks are used in the construction of buildings and underground basement walls. Blocks can be used for installation of foundation pad as well as for installing foundations in wet soils were the environment is non-aggressive. Under the latter conditions waterproof insulation shall be installed. When blocks are used in hostile environments, the requirements of LST EN 206-1 5.3 and of LST EN 13369 4.3.7 must be taken into account.

Scope : 1.3 In terms of flammability blocks classified as "A" class do not necessitate to further test in accordance with LST EN 13369 4.3.4. 1.4 Detailed production drawings are to be prepared in accordance with applicable regulatory documents.



Subsector B33: BUILDING DESIGN

Subsector : B33 Registration Date : 2013-01-21Organization : EVSCountry : EstoniaProject ID : 00112250/0001 Project EstablishedICS : 91.010, 91.020National Ref : prEVS 865-2Title : Description of building design - Part 2: Design note of detailed designScope : The standard gives recommendations for drawing up design note for detailed design

documentation for a building, utility networks, site plan and landscape architecture


Subsector : B33 Registration Date : 2013-01-18Organization : UNMZ Draft Issue Date : 2013-02-01Country : Czech Republic Latest Date for Comments : 2013-03-31Project ID : 73001512/0001 Draft for public enquiryICS :National Ref :Title : Security standard on the physical protection of critical infrastructure facilitiesScope : The aim of the standard is to give recommendations for the owners/operators concerning

design, reconstruction and refurbishment of critical infrastructures to eliminate or minimise the impacts of relevant threats and set optimum level in terms of physical protection of critical infrastructures.


Subsector : B33 Registration Date : 2013-01-25Organization : AFNORCountry : FranceProject ID : FA181570/0001 Project EstablishedICS :National Ref : PR NF P99-610Title : Furniture for street comfort and cleanness. Public seats. Rubustness and stability seats



Subsector B99: UNDETERMINED

Subsector : B99 Registration Date : 2013-01-18Organization : SFS Draft Issue Date : 2012-12-14Country : Finland Latest Date for Comments : 2013-02-28Project ID : 0000E288/0001 Draft for public enquiryICS :National Ref :Title : Characteristics and requirements of windows and external pedestrian doorsets in

different applications


Subsector : B99 Registration Date : 2013-01-02Organization : NENCountry : NetherlandsProject ID : 50001794/0001 Project EstablishedICS : 03.080.30National Ref : NTA 8336:2012 nlTitle : Window cleaner register - Requirements and assessment proceduresScope : A national register for window cleaners will be developed. Individual window cleaners can

register themselves so it will be transparent where cleaning services are offered by whom. The specifications for this registers are given is this technical agreement.


Subsector : B99 Registration Date : 2013-01-10Organization : SNV Draft Issue Date : 2013-01-09Country : Switzerland Latest Date for Comments : 2013-02-22Project ID : CH130002/0001 Draft for public enquiryICS : 93.010National Ref : SN 671101Title : Terminals of the combined transport; Basics and design


Subsector : B99 Registration Date : 2013-01-25Organization : SNV Draft Issue Date : 2013-01-21Country : Switzerland Latest Date for Comments : 2013-03-06Project ID : CH130003/0001 Draft for public enquiryICS : 13.080.20National Ref : SN 670349Title : Tests on soils - oedometer test CRS (Constant Rate of Strain)



** End of Sector **




Sector C : CHEMICALS, CHEMICAL ENGINEERING AND FOOD PRODUCTS


Subsector C01: Food products

Subsector : C01 Registration Date : 2013-01-03Organization : TSECountry : TurkeyProject ID : t1001070/0001 Project EstablishedICS : 67.120.10National Ref :Title : Turkish sucukScope : This standard specifies Turkish sucuk, it doesn't specify heat-treated sucuk.


Subsector : C01 Registration Date : 2013-01-02Organization : TSECountry : TurkeyProject ID : t1003958/0001 Project EstablishedICS : 67.080.10National Ref :Title : Sour Cherry JamScope : This Standard comprises jams that are produced from cherry (Prunus cernausus L.), but

doesn’t comprise special cherry jam intended for diet.


Subsector : C01 Registration Date : 2013-01-02Organization : TSECountry : TurkeyProject ID : t1004186/0001 Project EstablishedICS : 67.080.10National Ref :Title : Strawberry JamScope : This Standard contains the jams manufactured by using fruit of strawberry (Fragaria vesca

L.) and does not contain special strawberry jam manufactured for diet.


Subsector : C01 Registration Date : 2013-01-02Organization : TSECountry : TurkeyProject ID : t1012303/0001 Project EstablishedICS : 67.200.10National Ref :Title : Edible coconut oilScope : This standard covers only edible natural and refined coconul oil ıt does not cover the oil

which lost its edible propertly and esterified oils which changes the compositun of futly acids or consistency.


Subsector : C01 Registration Date : 2013-01-02Organization : TSECountry : TurkeyProject ID : t2008371/0001 Project EstablishedICS : 67.080.10National Ref :Title : Hazelnut PasteScope : This standard specifies hazelnut paste.


Subsector : C01 Registration Date : 2013-01-02Organization : TSECountry : TurkeyProject ID : t3002419/0001 Project EstablishedICS : 67.220.10National Ref :Title : Red pepper- Ground (Powdered)Scope : This standard , includes ground (powdered) red pepper.


Subsector : C01 Registration Date : 2013-01-03Organization : TSECountry : TurkeyProject ID : tst02540/0002 Project EstablishedICS : 67.120.30National Ref :Title : Frozen AnchoviesScope : This standard applies to frozen anchovies which is defined in clause 0.2.1.


Subsector : C01 Registration Date : 2013-01-03Organization : TSECountry : TurkeyProject ID : tst11860/0001 Project EstablishedICS : 67.100.30National Ref :Title : Whey PowderScope : This standard covers the whey powder.



Subsector C02: PAINTS AND RELATED PRODUCTS

Subsector : C02 Registration Date : 2013-01-17Organization : DINCountry : GermanyProject ID : 00200796/0001 Project EstablishedICS :National Ref : 00200796Title : Paints and varnishes - Electro-deposition paints - Part 1: Terminology and general

principles


Subsector : C02 Registration Date : 2013-01-17Organization : DINCountry : GermanyProject ID : 00200797/0001 Project EstablishedICS :National Ref : 00200797Title : Paints and varnishes - Scratch test using a crockmeter


Subsector : C02 Registration Date : 2013-01-17Organization : DINCountry : GermanyProject ID : 00200799/0001 Project EstablishedICS :National Ref : 00200799Title : Paints and varnishes - Wettability - Part 6: Measurement of dynamic contact angle


Subsector : C02 Registration Date : 2013-01-17Organization : DINCountry : GermanyProject ID : 00200800/0001 Project EstablishedICS :National Ref : 00200800Title : Paints and varnishes - Wettability - Part 7: Measurement of the contact angle ...


Subsector : C02 Registration Date : 2013-01-17Organization : DINCountry : GermanyProject ID : 00200801/0001 Project EstablishedICS :

National Ref : 00200801Title : Determination of hydroxyl value - Part 3: High-spped method


Subsector : C02 Registration Date : 2013-01-28Organization : BSICountry : United KingdomProject ID : 01300122/0001 Project EstablishedICS :National Ref : BS 6150:2006+A1Title : Painting of buildings. Code of practice. Amendment



Subsector C03: CHEMISTRY

Subsector : C03 Registration Date : 2013-01-17Organization : DINCountry : GermanyProject ID : 06234120/0001 Project EstablishedICS :National Ref : 06234120Title : pH measurement - Measuring methods with potentiometric cells - Terms and definitions



Subsector C06: ESSENTIAL OILS

Subsector : C06 Registration Date : 2013-01-02Organization : AENORCountry : SpainProject ID : P0040655/0001 Project EstablishedICS :National Ref : PNE 84303Title : Essential oils. Essential oil of thyme containing thymol, Spanish type (Thymus zygis

(Loefl.) L.)Scope : This standard specifies certain characteristics of the Essential oil of Thyme containing

thymol, Spanish type (Thymus zygis (Loefl.), in order to facilitate assessment of its quality.

Relatedness :National : REV/AMD UNE 84303:2006, UNE 84303:2006 ERRATUM:2009

Subsector : C06 Registration Date : 2013-01-02Organization : AENORCountry : SpainProject ID : P0040656/0001 Project EstablishedICS :National Ref : PNE 84310Title : Essential oils. Essential oil of sage, Spanish (salvia lavandulifolia Vahl).Scope : This standard specifies certain characteristics of the Essential Oil of Sage, Spanish (Salvia

lavandulifolia Vahl), in order to facilitate assessment of its quality.

Relatedness :National : REV/AMD UNE 84310:2001


** End of Sector **




Sector F : FUNDAMENTAL STANDARDS


Subsector F01: TECHNICAL DRAWINGS

Subsector : F01 Registration Date : 2013-01-25Organization : AFNORCountry : FranceProject ID : FA181588/0001 Project EstablishedICS :National Ref : PR XP E 04-007Title : Geometrical product specifications (GPS) - Discreet modal decomposition



Subsector F05: MEASURING INSTRUMENTS

Subsector : F05 Registration Date : 2013-01-28Organization : BSICountry : United KingdomProject ID : 01300123/0001 Project EstablishedICS :National Ref : BS 7898Title : Guide to hydrometric data management



Subsector F08: SURFACES

Subsector : F08 Registration Date : 2013-01-25Organization : AFNORCountry : FranceProject ID : FA181586/0001 Project EstablishedICS :National Ref : PR NF E 03-110Title : Geometrical product specification (GPS) - Screw threads - Direct measuring methods


Subsector : F08 Registration Date : 2013-01-25Organization : AFNORCountry : FranceProject ID : FA181587/0001 Project EstablishedICS :National Ref : PR NF E 01-005Title : Mechanical products - Ecodesign methodology


Subsector : F08 Registration Date : 2013-01-25Organization : AFNORCountry : FranceProject ID : FA181601/0001 Project EstablishedICS :National Ref : PR NF E 11-011Title : Length measuring instruments - Plain ring standard grauges


Subsector : F08 Registration Date : 2013-01-25Organization : AFNORCountry : FranceProject ID : FA181602/0001 Project EstablishedICS :National Ref : PR NF E 11-012Title : Length measuring instruments - Plain plug standard gauges and standard discs


Subsector : F08 Registration Date : 2013-01-25Organization : AFNORCountry : FranceProject ID : FA181603/0001 Project EstablishedICS :National Ref : PR NF E 11-019Title : Geometrical product specification (GPS) - Specific standards - Rules of design and

characteristics


Subsector : F08 Registration Date : 2013-01-25Organization : AFNORCountry : FranceProject ID : FA181604/0001 Project EstablishedICS :National Ref : PR NF E 11-101Title : Measuring instruments - Measuring plates


Subsector : F08 Registration Date : 2013-01-25Organization : AFNORCountry : FranceProject ID : FA181605/0001 Project EstablishedICS :National Ref : PR NF E 11-102

Title : Measuring instruments - Vee blocks


Subsector : F08 Registration Date : 2013-01-25Organization : AFNORCountry : FranceProject ID : FA181606/0001 Project EstablishedICS :National Ref : PR NF E 11-104Title : Measuring instruments - Knife edge rules


Subsector : F08 Registration Date : 2013-01-25Organization : AFNORCountry : FranceProject ID : FA181607/0001 Project EstablishedICS :National Ref : PR NF E 11-107Title : Geometrical product specifications (GPS) - Metrological spheres



Subsector F14: GRAPHICAL TECHNOLOGY, SIGN-BOARDS AND NAMEPLATES

Subsector : F14 Registration Date : 2013-01-02Organization : AENORCountry : SpainProject ID : P0040621/0001 Project EstablishedICS :National Ref : PNE 54130-1Title : Visual corporative identity's manual. Part 1: Sections.Scope : This standard defines recommendations of visual corporative identity.

Relatedness :National : REV/AMD UNE 54130-1:2008


Subsector F15: MATERIAL TESTING IN GENERAL

Subsector : F15 Registration Date : 2013-01-17Organization : DINCountry : GermanyProject ID : 06234127/0001 Project EstablishedICS : 17.060National Ref : DIN 51366

Testing of mineral oil hydrocarbons - Measurement of kinematic viscosity by means of

Title : the Cannon-Fenske viscometer for opaque liquids



Subsector F21: VALUE ANALYSIS AND PROJECT NETWORK

Subsector : F21 Registration Date : 2013-01-30Organization : EVSCountry : EstoniaProject ID : 00112522/0001 Project EstablishedICS : 03.060, 03.080, 91.040, 93.010National Ref : prEVS 875-10Title : Property valuation - Part 10: Inspection of Property and Data CollectionScope : The standard series EVS 875 applies to property valuation. These standards are to be used

for valuation activities and using valuations, especially for activities dealing with lending and financial reporting. The users of these standards are real estate specialists, construction specialists, environment specialists, financial reporting specialists (accountants, auditors), credit institutions, higher education institutions. These standards create a basis for unified approach to property valuation, satisfying the needs of private and public sector.



Subsector F99: UNDETERMINED

Subsector : F99 Registration Date : 2013-01-17Organization : UNMZ Draft Issue Date : 2013-02-28Country : Czech Republic Latest Date for Comments : 2013-04-30Project ID : 01000713/0001 Project EstablishedICS :National Ref :Title : Corporate social responsibility management system - RequirementsScope : The standard specifies requirements for the management system of social responsibility;

specifically incorporates management system requirements, requirements for individual CSR pillars (economic, environmental and social) and improvement requirements (in accordance with the PDCA cycle).



** End of Sector **




Sector H : PRODUCTS FOR HOUSEHOLD AND LEISURE USE


Subsector H06: HOROLOGY

Subsector : H06 Registration Date : 2013-01-25Organization : AFNORCountry : FranceProject ID : FA181487/0001 Project EstablishedICS :National Ref : PR NF S87-500Title : Horology - Time transmission from masterclock to secondary clocks by coded signals on

double-wound or wireless - Requirements


Subsector : H06 Registration Date : 2013-01-25Organization : AFNORCountry : FranceProject ID : FA181488/0001 Project EstablishedICS :National Ref : PR NF S81-550Title : Horology - Method for the inspection of the quality of quartz watches



Subsector H09: FURNITURE

Subsector : H09 Registration Date : 2013-01-07Organization : UNICountry : ItalyProject ID : 40006170/0001 Project EstablishedICS : 97.140National Ref : U40006170Title : Surface finishings for wood and furniture - Determination of surface resistance to

temperature changesScope : The standard describes two methods for evaluating the effect of rapid temperature changes

on finished panels forming furniture elements. The scope is to assess any alteration of the surface under test and the possible interactions among the combination of two or more materials. The methods are suitable for both a comparison of panels with different coating systems and as a test to ensure that a given level of performance is maintained or achieved. The standard applies to furniture surfaces. The standard does not apply to surfaces made of leather, leather imitations, natural and synthetic fabrics.


Subsector : H09 Registration Date : 2013-01-25Organization : AFNORCountry : FranceProject ID : FA181572/0001 Project EstablishedICS :

National Ref : PR NF D60-001Title : Furniture - Terminology


Subsector : H09 Registration Date : 2013-01-25Organization : AFNORCountry : FranceProject ID : FA181573/0001 Project EstablishedICS :National Ref : PR NF D60-002Title : Furniture - Rules for the presentation of the descriptive characteristics of furniture and

chairs


Subsector : H09 Registration Date : 2013-01-25Organization : AFNORCountry : FranceProject ID : FA181575/0001 Project EstablishedICS :National Ref : PR NF D64-011Title : Domestic and contract furniture - Mattresses for children cos - Safety requirements and

test methods


Subsector : H09 Registration Date : 2013-01-25Organization : AFNORCountry : FranceProject ID : FA181576/0001 Project EstablishedICS :National Ref : PR NF D61-060Title : Outside furniture. Seats. General characteristics. Tests. Requirements


Subsector : H09 Registration Date : 2013-01-02Organization : AENORCountry : SpainProject ID : P0040704/0001 Project EstablishedICS :National Ref : PNE 56875Title : Kitchen furniture. Specifications, requirements, and test methods.Scope : This Standard establishes specifications, requirements and test methods (strength,

durability, surfacing materials, and physical) for kitchen furniture at two levels of use (intense and standard). Mechanical test and their corresponding requirements are based on EN 16122 and prEN 16121 standards. This standard is not applicable to kitchen furniture

Scope : intended for use in collectivities.

Relatedness :

National :REV/AMD UNE 56841:2001, UNE 56842:2001, UNE 56843:2001, UNE 56842:2002 ERRATUM

European : Not Equivalent to EN 16122:2012

Subsector : H09 Registration Date : 2013-01-02Organization : AENORCountry : SpainProject ID : P0040704/0001 Project EstablishedICS :National Ref : PNE 56875Title : Kitchen furniture. Specifications, requirements, and test methods.Scope : This Standard establishes specifications, requirements and test methods (strength,

durability, surfacing materials, and physical) for kitchen furniture at two levels of use (intense and standard). Mechanical test and their corresponding requirements are based on EN 16122 and prEN 16121 standards. This standard is not applicable to kitchen furniture intended for use in collectivities.

Relatedness :

National :REV/AMD UNE 56841:2001, UNE 56842:2001, UNE 56843:2001, UNE 56842:2002 ERRATUM

European : Not Equivalent to prEN 16121


Subsector H14: CARAVANS

Subsector : H14 Registration Date : 2013-01-25Organization : AFNORCountry : FranceProject ID : FA181780/0001 Project EstablishedICS :National Ref : NF S56-300Title : Caravans Elementary technical inspection without dismanting


Subsector : H14 Registration Date : 2013-01-25Organization : AFNORCountry : FranceProject ID : FA181785/0001 Project EstablishedICS :National Ref : NF S 56-300Title : Caravans - Elementary technical inspection without dismanting



Subsector H29: HEAT PUMPS

Subsector : H29 Registration Date : 2013-01-29Organization : UNICountry : ItalyProject ID : 0206D570/0001 Project EstablishedICS : 03.100National Ref : E0206D570Title : Heat pump geothermal systems - Requiremets for operators qualification of firms that

build geothermal exchangerScope : The Techincal Specification defines the knowledge, competence, formation and valuation

requirements for operators qualification of firms that build geothermal exchanger. In the standard "operators" are defined as both those who make the geothermal implant, those who take responsability for it and those who verify its correspondancy to standards and its functionality.



Subsector H30: EQUIPMENT FOR CHILDREN

Subsector : H30 Registration Date : 2013-01-25Organization : AFNORCountry : FranceProject ID : FA181574/0001 Project EstablishedICS :National Ref : PR NF S54-045Title : Children's rest beds for domestic or collective use - Safety requirements and test

methods



Subsector H31: DEDICATED LPG APPLIANCES

Subsector : H31 Registration Date : 2013-01-02Organization : NENCountry : NetherlandsProject ID : 50001707/0001 Project EstablishedICS : 23.020.30National Ref : NPR 2578:2007/A1:2011 Concept nlTitle : Management and maintenance of LPG, propane and butane installationsScope : This code of practice gives rules for the installation and use of LPG-installations in the

Netherlands in accordance with NEN-EN 12820. It concerns standard installations for the use or trade of LPG.



Subsector H33: FOOTWEAR (EXCLUDING PROTECTIVE FOOTWEAR)

Subsector : H33 Registration Date : 2013-01-25

Organization : AFNORCountry : FranceProject ID : FA181489/0001 Project EstablishedICS :National Ref : PR NF S86-604Title : Horology - Characterization of metallic bracelets for watches



Subsector H34: CHILD SAFETY

Subsector : H34 Registration Date : 2013-01-25Organization : AFNORCountry : FranceProject ID : FA181502/0001 Project EstablishedICS :National Ref : PR NF B51-001Title : Timber - Technical and chemical characteristics of timber



Subsector H99: UNDETERMINED

Subsector : H99 Registration Date : 2013-01-17Organization : DINCountry : GermanyProject ID : 04000307/0001 Project EstablishedICS :National Ref : 04000307Title : Methods for measuring of the energy use from equipment for commercial kitchens - Part

14: Water supply connected drinking water disruption systems with cooling and CO2 enrichment



** End of Sector **




Sector I : MECHANICAL ENGINEERING


Subsector I01: SCREW THREADS

Subsector : I01 Registration Date : 2013-01-11Organization : TSECountry : TurkeyProject ID : tst04069/0002 Project EstablishedICS : 21.060.20National Ref :Title : Nuts With Holes Metric Scope : This standard covers nuts with holes metric

Relatedness :National : NewEuropean : Modified DIN 1816:1971




Relatedness :National : NewEuropean : Modified DIN 6327-1:2004



Subsector : I01 Registration Date : 2013-01-11Organization : TSE

Country : TurkeyProject ID : tst04069/0002 Project EstablishedICS : 21.060.20National Ref :Title : Nuts With Holes Metric Scope : This standard covers nuts with holes metric





Relatedness :National : NewEuropean : Not Equivalent to DIN 547:2006

Subsector : I01 Registration Date : 2013-01-24Organization : TSECountry : TurkeyProject ID : tst04070/0002 Project EstablishedICS : 21.060.20National Ref :Title : Tommy Nuts Metric Scope : This standard covers tommy nuts, metric


Subsector : I01 Registration Date : 2013-01-24Organization : TSECountry : TurkeyProject ID : tst04070/0002 Project EstablishedICS : 21.060.20

National Ref :Title : Tommy Nuts Metric Scope : This standard covers tommy nuts, metric


Subsector : I01 Registration Date : 2013-01-24Organization : TSECountry : TurkeyProject ID : tst04070/0002 Project EstablishedICS : 21.060.20National Ref :Title : Tommy Nuts Metric Scope : This standard covers tommy nuts, metric


Subsector : I01 Registration Date : 2013-01-24Organization : TSECountry : TurkeyProject ID : tst04071/0002 Project EstablishedICS : 21.060.20National Ref :Title : Slpotted Nuts, MetricScope : This standard covers slotted nuts mteric






Subsector : I01 Registration Date : 2013-01-11Organization : TSECountry : TurkeyProject ID : tst04093/0002 Project EstablishedICS : 21.060.20National Ref :Title : Eye Nuts, Metric Scope : This standard covers eye nuts, metric






Subsector : I01 Registration Date : 2013-01-11Organization : TSECountry : TurkeyProject ID : tst04094/0002 Project EstablishedICS : 21.060.20National Ref :Title : Knurled Nuts, Metric Scope : This standard covers knurled nuts metric






Subsector : I01 Registration Date : 2013-01-24Organization : TSECountry : TurkeyProject ID : tst04096/0002 Project EstablishedICS : 21.060.20National Ref :Title : Octogonal Nuts, With Metric and Withworth ThreadScope : This standard covers octogonal nuts with metric and withword thread.


Subsector : I01 Registration Date : 2013-01-24Organization : TSECountry : TurkeyProject ID : tst04096/0002 Project EstablishedICS : 21.060.20National Ref :Title : Octogonal Nuts, With Metric and Withworth ThreadScope : This standard covers octogonal nuts with metric and withword thread.



Subsector I09: SMALL TOOLS

Subsector : I09 Registration Date : 2013-01-17Organization : DINCountry : GermanyProject ID : 12101999/0001 Project EstablishedICS :National Ref : 12101999Title : MQL processing technology - Part 4: Tapping chuck and tab/cold forming tab



Subsector I13: GAS CONTAINERS

Subsector : I13 Registration Date : 2013-01-17Organization : DINCountry : GermanyProject ID : 01600973/0001 Project EstablishedICS :National Ref : 01600973Title : Gas cylinder valves for cylinder test pressures up to 300 bar - Part 7: Gauges for

tapered thread W 31,3 × 1/14 (acetylene)



Subsector I14: GEARS

Subsector : I14 Registration Date : 2013-01-25Organization : AFNORCountry : FranceProject ID : FA181639/0001 Project EstablishedICS :National Ref : PR NF E22-165Title : Spring retaining rings - Axially mounted circlips for shafts bores



Subsector I16: INTERNAL COMBUSTION ENGINES

Subsector : I16 Registration Date : 2013-01-25Organization : AFNORCountry : FranceProject ID : FA181610/0001 Project EstablishedICS :National Ref : PR NF E37-503Title : Gas turbines - Procurement - Basic procurement information for combined-cycle plants



Subsector I19: NUCLEAR ENERGY

Subsector : I19 Registration Date : 2013-01-14Organization : ASICountry : AustriaProject ID : 00025521/0001 Project EstablishedICS : 11.040.50National Ref : ÖNORM S 5276Title : Acceptance testing of gamma camerasScope : This ÖNORM is both the basis for the legally required acceptance testing and the basis for

the review of its supply agreement with the manufacturer. Since the determination of all parameters specified by NEMA is an extremely time-consuming task, in this ÖNORM a subset of measurements is defined that which can help in identifying significant problems. The purpose of this ÖNORM is to check the significant points provided by the manufacturer's specification in an abbreviated procedure. It is therefore essential for selected test positions, which are achieved with meaningful test equipment, carried out acceptance tests. If necessary, the tests according to NEMA are replaced by simplified custom procedures. Reference values specifying tolerance values for the following consistency checks arer set to ensure optimal image quality at low dose to the patient.


Subsector : I19 Registration Date : 2013-01-25Organization : AFNORCountry : FranceProject ID : FA181585/0001 Project EstablishedICS :National Ref : NF M60-780-2Title : Nuclear energy - Measurement of radioactivity in the environment - Bioindicators - Part

2 : sampling of biological bioindicators from dulçaquicole environment.



Subsector I31: VALVES

Subsector : I31 Registration Date : 2013-01-02Organization : AENORCountry : SpainProject ID : P0040747/0001 Project EstablishedICS :National Ref : PNE 60713-1:2007/2MTitle : Stainless steel flexible hoses with connections for conduction of gaseous fuels up to a

pressure of 0,4 bar with a maximal length of 2 m. Part 1: Flexible hoses with stainless steel connections.

Scope : This standard aims to set the dimensions, technical and operating specifications, as well as testing to be met by stainless steel tubing with stainless steel fittings for joining reception facilities for fixed appliances that use gas as fuel.

Relatedness :National : REV/AMD UNE 60713-1:2007, UNE 60713-1:2007/1M:2010

Subsector : I31 Registration Date : 2013-01-02Organization : AENORCountry : SpainProject ID : P0040749/0001 Project EstablishedICS :National Ref : PNE 60719:2011/1MTitle : Fittings for hand operated metallic valves for installations using gaseous fuels.Scope : This standard establishes the dimensions of those fittings needed for the connection of

metallic valves and other elements of the gas receiving installations.



Subsector I32: FLANGES

Subsector : I32 Registration Date : 2013-01-25Organization : AFNORCountry : FranceProject ID : FA181599/0001 Project EstablishedICS :National Ref : PR NF E29-260Title : Industrial pipes - Pipe components with PTFE - FEP - PFA - fluorocarbon resin



Subsector I99: UNDETERMINED

Subsector : I99 Registration Date : 2013-01-02Organization : AENORCountry : SpainProject ID : P0040750/0001 Project EstablishedICS :National Ref : PNE 60715-2Title : Metallic flexible hoses for connection of installations to burning appliances. Assemblies

of flexible connection with security socket and thread. Part 2: Continuous helicoidal corrugated stainless steel flexible connection assemblies.

Scope : This standard is to define the technical and performance characteristics and the tests to be fulfilled by the stainless steel flexible connections with safety plug, for connecting gas appliances to receiving facilities.



** End of Sector **




Sector M : METALLIC MATERIALS


Subsector M05: WELDING

Subsector : M05 Registration Date : 2013-01-25Organization : AFNORCountry : FranceProject ID : FA181600/0001 Project EstablishedICS :National Ref : PR NF A 89-422Title : Resistance welding - Method for the assessment of coated and uncoated weld bondes

sheet materials



** End of Sector **




Sector N : NON-METALLIC MATERIALS


Subsector N03: PETROLEUM PRODUCTS

Subsector : N03 Registration Date : 2013-01-17Organization : TSECountry : TurkeyProject ID : tst01538/0001 Project EstablishedICS : 75.080National Ref :Title : Determination of the acidity of hydrocarbon liquids and distillation residues Scope : This standard specifies a test method for the determination of the acidity of hydrocarbon

liquids and distillation residues


Subsector : N03 Registration Date : 2013-01-17Organization : TSECountry : TurkeyProject ID : tst01763/0001 Project EstablishedICS : 75.160.20National Ref :Title : Determination of napthalene hydrocarbons in aviation turbine fuels by ultraviolet

spectrophotometryScope : This standard specifies a test method for the determination of naphathalene hydrocarbons

by ultraviolet spectrometry.



Subsector N06: RUBBER

Subsector : N06 Registration Date : 2013-01-25Organization : AFNORCountry : FranceProject ID : FA181594/0001 Project EstablishedICS :National Ref : PR NF T 46-047Title : Rubber and rubber products - Determination of composition of vulcanizates and uncured

compounds by thermograrvimetry



Subsector N07: SAWN TIMBER

Subsector : N07 Registration Date : 2013-01-28Organization : BSICountry : United KingdomProject ID : 01203945/0001 Project EstablishedICS :National Ref : BS 8605-1

Title : External timber cladding. Specification


Subsector : N07 Registration Date : 2013-01-25Organization : AFNORCountry : FranceProject ID : FA181490/0001 Project EstablishedICS :National Ref : PR NF P21-220-1-1Title : Timber stairs with timber handrails - Part 1-1: Technical specifications


Subsector : N07 Registration Date : 2013-01-25Organization : AFNORCountry : FranceProject ID : FA181491/0001 Project EstablishedICS :National Ref : PR NF P21-220-1-2Title : Timber stairs with timber handrails - Part 1-2: General criteria for choice of materials


Subsector : N07 Registration Date : 2013-01-25Organization : AFNORCountry : FranceProject ID : FA181492/0001 Project EstablishedICS :National Ref : PR NF P21-220-2Title : Timber stairs with timber handrails - Part 2: Special clauses


Subsector : N07 Registration Date : 2013-01-25Organization : AFNORCountry : FranceProject ID : FA181499/0001 Project EstablishedICS :National Ref : PR NF X41-568Title : Wood preservatives - Laboratory method for obtaining samples for analysis to measure

losses by leaching into water or synthetic sea water


Subsector : N07 Registration Date : 2013-01-25

Organization : AFNORCountry : FranceProject ID : FA181501/0001 Project EstablishedICS :National Ref : PR NF B50-002Title : Wood - Vocabulary


Subsector : N07 Registration Date : 2013-01-25Organization : AFNORCountry : FranceProject ID : FA181507/0001 Project EstablishedICS :National Ref : PR NF B50-100-4Title : Durability of wood and wood- based products ? Definition of use classes - Part 4:

National declaration on the situation of biological agents


Subsector : N07 Registration Date : 2013-01-25Organization : AFNORCountry : FranceProject ID : FA181508/0001 Project EstablishedICS :National Ref : PR NF X41-542Title : Wood preservatives - Anti-termite treatment product for floors, walls, foundations, and

masonry work - Accelerated ageing test of treated materials prior of biological testing - Percolation test


Subsector : N07 Registration Date : 2013-01-25Organization : AFNORCountry : FranceProject ID : FA181509/0001 Project EstablishedICS :National Ref : PR NF X41-543-1Title : Wood preservatives - Determination of the efficacy of a bait-trap system - Part 1:

Efficacy of the insecticide formulation ? Laboratory method


Subsector : N07 Registration Date : 2013-01-25Organization : AFNORCountry : FranceProject ID : FA181510/0001 Project EstablishedICS :

National Ref : PR NF X41-551Title : Termites - Determination of the effectiveness against termites of products or materials

used as barrier designed for ground and/or wall - Requirements for effectiveness


Subsector : N07 Registration Date : 2013-01-25Organization : AFNORCountry : FranceProject ID : FA181511/0001 Project EstablishedICS :National Ref : PR NF X41-550Title : Termites - Determination of the effectiveness against termites of products or materials

used as barrier designed for ground and/or wall - Laboratory method


Subsector : N07 Registration Date : 2013-01-25Organization : AFNORCountry : FranceProject ID : FA181512/0001 Project EstablishedICS :National Ref : PR NF X41-547Title : Wood preservatives - Determination of fongicide efficacy of temporary wood protectives

for green sawn timber - Laboratory method



Subsector N09: PLASTICS

Subsector : N09 Registration Date : 2013-01-04Organization : ISRM


Project ID : 00043238/0001Draft for public

enquiryICS : 83.080National Ref : prМКС 1009:2012Title : Methods for the assessment of the oxo-biodegradation of plastics and of the phyto-

toxicity of the residues in controlled laboratory conditions Scope : The standard defines a testing scheme to characterize the behaviour of plastics when

exposed to photo-degradation or heat degradation. The two degradation mechanisms are also referred to as “oxo-degradation”.



Subsector N11: WOOD-BASED PANELS

Subsector : N11 Registration Date : 2013-01-25Organization : AFNORCountry : FranceProject ID : FA181686/0001 Project EstablishedICS :National Ref : PR NF B54-040/A1Title : Wood profiles for floor decking - Specifications

Relatedness :National : REV/AMD NF B54-040:201010 (B54-040)


** End of Sector **




Sector S : HEALTH, ENVIRONMENT AND MEDICAL EQUIPMENT


Subsector S04: PROTECTIVE CLOTHING AND EQUIPMENT

Subsector : S04 Registration Date : 2013-01-28Organization : BSICountry : United KingdomProject ID : 01203943/0001 Project EstablishedICS :National Ref : BS 7985Title : Code of practice for the use of rope access for industrial purposes



Subsector S09: WATER QUALITY AND WATER SUPPLY

Subsector : S09 Registration Date : 2013-01-21Organization : EVSCountry : EstoniaProject ID : 00112248/0001 Project EstablishedICS : 13.060.30, 91.010.30National Ref : prEVS 847-3Title : Municipal water supply - Part 3: Design of water supply systemScope : The standard applies to water supply systems, regardless of their form of ownership, and is

intended for use with the public system, including pumping stations, and designing watertanks, pipes, pumps, and other auxiliary equipment dimensioning and selection. Standard is used in the construction of a new system and an existing public water supply system extensions and conversions. Standard accessories include informative, auxiliary materials recommended designers.


Subsector : S09 Registration Date : 2013-01-21Organization : EVSCountry : EstoniaProject ID : 00112249/0001 Project EstablishedICS : 13.060.30, 91.010.30National Ref : prEVS 835Title : Design of site water supplyScope : This Standard applies to property water supply, which are connected to the city or town

public water supply system or the local water supply source. Property water supply system is defined with the inner plumbing of cold and hot water piping, water supply facilities, and underground water pipes within and out of the property until main valve. Standards must be followed in the design, installation, testing and re-construction of existing water supply systems.

Relatedness :National : REV/AMD EVS 835:2003

Subsector : S09 Registration Date : 2013-01-17Organization : DINCountry : Germany

Project ID : 11903417/0001 Project EstablishedICS :National Ref : 11903417Title : German standard methods for the examination of water, waste water and sludge -

Jointly determinable substances (group F) - Part 43: Determination of selected easily volatile organic compounds in water - Method using gas chromatography (GC-MS) after headspace (HS-GC-MS) (F 43)


Subsector : S09 Registration Date : 2013-01-17Organization : DINCountry : GermanyProject ID : 11903418/0001 Project EstablishedICS :National Ref : 11903418Title : German standard methods for the examination of water, waste water and sludge -

Jointly determinable substances (group F) - Part 35: Determination of selected neutral and alkaline plant treatment agents using high performance liquid chromatography and mass spectrometric detection (HPLC-MS/MS) (F 36)



Subsector S10: SURGICAL IMPLANTS

Subsector : S10 Registration Date : 2013-01-25Organization : AFNORCountry : FranceProject ID : FA181649/0001 Project EstablishedICS :National Ref : PR NF S94-057Title : Implants for surgery - Metallic materials - Forgeable and cold-formed cobalt-chromium-

nickel-molybdenum-iron alloy


Subsector : S10 Registration Date : 2013-01-25Organization : AFNORCountry : FranceProject ID : FA181764/0001 Project EstablishedICS :National Ref : NF S94-071Title : Materials for surgical implants - Determination of surface finish of coatings used for

biomedical applications



Subsector S16: AIDS FOR THE DISABLED

Subsector : S16 Registration Date : 2013-01-29Organization : UNICountry : ItalyProject ID : 42009630/0001 Project EstablishedICS : 11.180National Ref : U42009630Title : Mass-produced orthopedic footwear - Safety and performance requirements and test

methodsScope : This standard specifies safety and performance requirements and test methods of mass-

produced orthopedic footwear designed to accomodate an arch support.



Subsector S20: WASTE COLLECTION, HANDLING AND TRANSPORTATION

Subsector : S20 Registration Date : 2013-01-14Organization : ASICountry : AustriaProject ID : 00025528/0001 Project EstablishedICS : 91.010.99, 91.040.01National Ref : ÖNORM B 2131Title : Recycling-oriented deconstructionScope : These ÖNORM describes the necessary measures in planning and execution of a defined

recycling-oriented deconstruction and lays down the principles for the separation of the individual groups of materials and fractions determined in terms of recovery or disposal. The recovery-oriented deconstruction will be carried out in that way that the greatest possible utilization of the demolition materials can be made.


Subsector : S20 Registration Date : 2013-01-17Organization : DINCountry : GermanyProject ID : 05100773/0001 Project EstablishedICS :National Ref : 05100773Title : Radio-frequency identification of waste containers by transponder technology using

frequencies below 135 kHz, text in German and English



** End of Sector **




Sector T : TRANSPORT, MECHANICAL HANDLING AND PACKAGING


Subsector T01: SHIPBUILDING AND MARITIME STRUCTURES

Subsector : T01 Registration Date : 2013-01-02Organization : AENORCountry : SpainProject ID : P0040665/0001 Project EstablishedICS :National Ref : PNE 27007Title : Civil shipbuilding and ship repairing. Standardised components. Mooring elements:

Welded steel bollardScope : This standard specifies the designs, sizes dimensions and technical requirements for welded

steel mooring bollards suitable for installation on sea-going vessels to meet normal mooring and towing requirements.

Relatedness :National : REV/AMD UNE 27007:1950International : Not Equivalent to ISO 13776:2012


Cruciform bollardScope : This standard specifies the designs, sizes dimensions and technical requirements for welded

steel mooring cruciform bollards, suitable for installation on sea-going vessels to meet normal mooring and towing requirements.

Relatedness :National : NewInternational : Not Equivalent to ISO 13797:2012


Steel rollersScope : This standard specifies the designs, sizes dimensions and technical requirements for steel

rollers for guide mooring ropes of ships.

Relatedness :

National :REV/AMD UNE 27009-1:1976, UNE 27009-2:1976, UNE 27009-3:1976, UNE 27009-4:1976, UNE 27009-5:1976, UNE 27009-6:1976, UNE 27009-7:1976

Subsector : T01 Registration Date : 2013-01-02Organization : AENORCountry : SpainProject ID : P0040669/0001 Project EstablishedICS :National Ref : PNE 27011

Title : Civil shipbuilding and ship repairing. Standardised components. Mooring elements: Single open fairlead

Scope : This Standard specifies the designs, sizes and technical requirements for single open fairleads suitable for installation on sea-going vessels to meet normal mooring requirements.



Double open fairleadScope : This Standard specifies the designs, sizes and technical requirements for double open

fairleads suitable for installation on sea-going vessels to meet normal mooring requirements.


Subsector : T01 Registration Date : 2013-01-02Organization : AENORCountry : SpainProject ID : P0040675/0001 Project EstablishedICS :National Ref : PNE 27017Title : Civil shipbuilding and ship repairing Standardised components. Mooring elements:

CleatsScope : This standard specifies the design, sizes and technical requirements for mooring cleats

suitable for installation on sea-going vessels to meet mooring service normal requirements.



ChocksScope : This standard specifies the designs, sizes and technical requirements for mooring chocks

suitable for installation on sea-going vessels to meet normal mooring and towing requirements.

Relatedness :National : REV/AMD UNE 27021:1950International : Not Equivalent to ISO 13713:2012


Panama chocksScope : This Standard specifies the designs, sizes and technical requirements for panama type

chocks suitable for installation on sea-going vessels to meet normal mooring and towing requirements.



Pedestal fairleadScope : This standard specifies the designs, sizes and technical requirements for pedestal fairleads

used for guide of mooring rope suitable for installation on sea-going vessels to meet normal mooring requirements.

Relatedness :National : REV/AMD UNE 27025-1:1978International : Not Equivalent to ISO 13776:2012


Shipside roller fairleadsScope : This Standard specifies the designs, sizes and technical requirements for shipside roller

fairleads for guide mooring ropes of ships, suitable for installation on sea-going vessels to meet normal mooring requirements.



Subsector T02: AEROSPACE

Subsector : T02 Registration Date : 2013-01-28Organization : BSICountry : United KingdomProject ID : 01300159/0001 Project EstablishedICS :

National Ref : BS 4A 113:1999+A1:2012 CorrigendumTitle : Specification for cadmium-plated, mushroom-headed, unified-thread,slotted drive

bolts. Corrigendum


Subsector : T02 Registration Date : 2013-01-17Organization : DINCountry : GermanyProject ID : 13114982/0001 Project EstablishedICS :National Ref : 13114982Title : Aerospace; vented nickel-cadmium storage batteries, 24 V 15 Ah; Inactive for new

design



Subsector T09: MATERIALS HANDLING AND STORAGE EQUIPMENT

Subsector : T09 Registration Date : 2013-01-25Organization : AFNORCountry : FranceProject ID : FA181609/0001 Project EstablishedICS :National Ref : PR NF E24-404Title : Belt drives - V-ribbed belts - Determinationof measurement of pitch, angle and cord

position



Subsector T14: PACKAGING

Subsector : T14 Registration Date : 2013-01-29Organization : UNICountry : ItalyProject ID : 40006141/0001 Project EstablishedICS : 55.160National Ref : U40006141Title : Wood packages for bulk capacity over 300 kg - Part 1: Terms and definitionsScope : This standard establishes the terms and the definitions relating to the construction

elements and to the construction and operating methods of wood packages for bulk capacity over 300 kg.

Relatedness :National : REV/AMD UNI 9151-1:1998

Subsector : T14 Registration Date : 2013-01-29Organization : UNICountry : ItalyProject ID : 40006142/0001 Project EstablishedICS : 55.160National Ref : U40006142Title : Wood packages

Documents

Monthly Notifications Register - SUTN...Title : Maintenance - Specific terminology for the group transportation field Scope : The standard gives guidance to the group transportation