Upload
others
View
9
Download
0
Embed Size (px)
Citation preview
Networked Plant Automation and Control.
NSF Engineering Research Center (ERC) forReconfigurable Manufacturing Systems (RMS)
NSF Engineering Research Center for Reconfigurable Manufacturing SystemsUniversity of Michigan College of Engineering
# 1
Dhananjay Anand, Deepak Sharma, Wajiha Shahid, Hechen Yu, Malvika Bhatia, Hari Bharat Molabanti, James Moyne and Dawn Tilbury
The University of Michigan, College of Engineering
May, 2009
Networked Networked controlcontrol
Performance ofPerformance ofPrecision time Precision time SynchronizationSynchronization
Project OverviewProject Overview
NSF Engineering Research Center for Reconfigurable Manufacturing SystemsUniversity of Michigan College of Engineering
# 2
wireless networkswireless networksSynchronizationSynchronizationand timeand time--stampingstamping
Networked Networked controlcontrol
Performance ofPerformance ofPrecision time Precision time SynchronizationSynchronization
NSF Engineering Research Center for Reconfigurable Manufacturing SystemsUniversity of Michigan College of Engineering
# 3
wireless networkswireless networksSynchronizationSynchronizationand timeand time--stampingstamping
Goals:Goals:• Understand how to use wireless in diagnostics, control and safety applications.• Work with USCAR, help the automotive industry migrate cost effectively to wireless on the factory floor.
• Interact with Vendor Partners and Standards organizations .
Deliverables:Deliverables:
• Provide a standardized testing mechanism and test plan.
SummarySummary
NSF Engineering Research Center for Reconfigurable Manufacturing SystemsUniversity of Michigan College of Engineering
# 4
• Provide a standardized testing mechanism and test plan.
• Define best practices for wireless operation in factories.
• Tools for real time fault diagnosis and QoS assessment.
• Provide a capability for “record / playback” style investigation of interference phenomenon.
• Provide design tools for the planning stage of a wireless setup.
• Report on technology trends in wireless systems for control.
Networked Networked controlcontrol
Performance ofPerformance ofPrecision time Precision time synchronizationsynchronization
NSF Engineering Research Center for Reconfigurable Manufacturing SystemsUniversity of Michigan College of Engineering
# 5
wireless networkswireless networkssynchronizationsynchronizationand timeand time--stampingstamping
Goals:Goals:• Understand industry requirements for time synchronization.• Evaluate the capabilities of IEEE 1588 hardware time synchronization for control, diagnostics and safety systems.
• Study factors affecting time precision in an industrial setting for both wired and wireless networks.
• Develop formal approaches for controller design, to utilize time stamped datafor robust operation in the face of network vagaries.
Deliverables:Deliverables:
SummarySummary
NSF Engineering Research Center for Reconfigurable Manufacturing SystemsUniversity of Michigan College of Engineering
# 6
Deliverables:Deliverables:
• A comprehensive report on time synchronization requirements for industrial networks.
• A test-bed for characterizing the application of low level time stamping on a networked control system.
• A configurable factory scale simulation tool to evaluate synchronization and to assess the need for additional time synchronization capability.
Networked Networked controlcontrol
Performance ofPerformance ofPrecision time Precision time
NSF Engineering Research Center for Reconfigurable Manufacturing SystemsUniversity of Michigan College of Engineering
# 7
Performance ofPerformance ofwireless networkswireless networks
Precision time Precision time SynchronizationSynchronizationand timeand time--stampingstamping
Protocols and Protocols and software stacksoftware stack
effectseffects
Physical layer Physical layer and medium and medium
effectseffects
Radio coverage Radio coverage mapping formapping formultimulti--cellcell
configurationsconfigurations
Real world Real world performance of performance of
NTP and NTP and IEEE 1588IEEE 1588
Control and Control and Data Acquisition Data Acquisition with low level with low level Time stampingTime stamping
Performance ofPerformance ofwireless networkswireless networks
Precision time Precision time SynchronizationSynchronizationand timeand time--stampingstamping
Protocols and Protocols and software stacksoftware stack
effectseffects
Physical layer Physical layer and medium and medium
effectseffects
Radio coverage Radio coverage mapping formapping formultimulti--cellcell
configurationsconfigurations
Real world Real world performance of performance of
NTP and NTP and IEEE 1588IEEE 1588
Control and Control and Data Acquisition Data Acquisition with low level with low level Time stampingTime stamping
NSF Engineering Research Center for Reconfigurable Manufacturing SystemsUniversity of Michigan College of Engineering
# 8
Error recovery and automated retriesPacket parsingNetwork arbitration
Performance ofwireless networks
Protocols and software stack effects
Protocol Stacks for Bluetooth and Wi-Fi are designed for data applications.
For control systems where time precision of transmission is vital, the stack is a major source of time jitter in communication.
NSF Engineering Research Center for Reconfigurable Manufacturing SystemsUniversity of Michigan College of Engineering
# 9
Also, an error in physical layer can propagate through the protocol stack to manifest as huge time delays.
We are currently in the process or isolating the time delay contribution from the protocol stack alone so that it is possible to compare protocols independent of the physical layer.
Performance ofwireless networks
Protocols and software stack effects
The Bluetooth protocol stack is particularly interesting from this perspective since it is offers a lot of flexibility in how data is handled at the lower layers.
This allows the user to
NSF Engineering Research Center for Reconfigurable Manufacturing SystemsUniversity of Michigan College of Engineering
# 10
This allows the user to write custom “profiles” for the system that can demand synchronous responses for instance.There are provisions for hardwiring data handling functions all the way to the baseband as well.
Some implementations that modify this stack to improve determinism already exist as COTS solutions.
Performance ofwireless networks
Protocols and software stack effects
A very interesting illustration of effects introduced by the protocol stack in the Bluetooth system is plotted here on the right.
When the physical medium is maintained at close to ideal we see a distinct change in the average
New result
NSF Engineering Research Center for Reconfigurable Manufacturing SystemsUniversity of Michigan College of Engineering
# 11
a distinct change in the average network latency when the data payload touches 75 Bytes
Performance ofwireless networks
Protocols and software stack effects
A very interesting illustration of effects introduced by the protocol stack in the Bluetooth system is plotted here on the right.
When the physical medium is maintained at close to ideal we see a distinct change in the average network latency when the data
New result
NSF Engineering Research Center for Reconfigurable Manufacturing SystemsUniversity of Michigan College of Engineering
# 12
network latency when the data payload touches 75 Bytes.
Performance ofwireless networks
Protocols and software stack effects
A very interesting illustration of effects introduced by the protocol stack in the Bluetooth system is plotted here on the right.
When the physical medium is maintained at close to ideal we see a distinct change in the average network latency when the data
New result
NSF Engineering Research Center for Reconfigurable Manufacturing SystemsUniversity of Michigan College of Engineering
# 13
network latency when the data payload touches 75 Bytes.
Data packets for control networks Data packets for control networks are typically sized around this value are typically sized around this value making this a serious effect to making this a serious effect to consider.consider.
Performance ofPerformance ofwireless networkswireless networks
Precision time Precision time SynchronizationSynchronizationand timeand time--stampingstamping
Protocols and Protocols and software stacksoftware stack
effectseffects
Physical layer Physical layer and medium and medium
effectseffects
Radio coverage Radio coverage mapping formapping formultimulti--cellcell
configurationsconfigurations
Real world Real world performance of performance of
NTP and NTP and IEEE 1588IEEE 1588
Control and Control and Data Acquisition Data Acquisition with low level with low level Time stampingTime stamping
NSF Engineering Research Center for Reconfigurable Manufacturing SystemsUniversity of Michigan College of Engineering
# 14
Performance with increasing distancePerformance under the influence of active radio interferencePerformance with multipath reflections
Performance ofwireless networks
Physical layer and medium effects
With radio communication, the physical channel quality is always a source of uncertainty.
Early in the course of our research we took up the task of documenting performance parameters with changing physical parameters.
NSF Engineering Research Center for Reconfigurable Manufacturing SystemsUniversity of Michigan College of Engineering
# 15
changing physical parameters. A set of results presented here shows the effect of distance and interference on network delays and jitter.
da) 802.11ab) 802.11bc) 802.11gd) Bluetooth
Performance ofwireless networks
Physical layer and medium effects
With radio communication, the physical channel quality is always a source of uncertainty.
Early in the course of our research we took up the task of documenting performance parameters with changing physical parameters.
NSF Engineering Research Center for Reconfigurable Manufacturing SystemsUniversity of Michigan College of Engineering
# 16
changing physical parameters. A set of results presented here shows the effect of distance and interference on network delays and jitter.
da) 802.11ab) 802.11bc) 802.11gd) Bluetooth
With increasing distance we see a With increasing distance we see a steady increase in the standard steady increase in the standard deviation and the average delay. deviation and the average delay.
Performance ofwireless networks
Physical layer and medium effects
With radio communication, the physical channel quality is always a source of uncertainty.
Early in the course of our research we took up the task of documenting performance parameters with changing A
verage RTT (ms)
NSF Engineering Research Center for Reconfigurable Manufacturing SystemsUniversity of Michigan College of Engineering
# 17
parameters with changing physical parameters. A tabulated set of results presented here shows the effect of distance and interference on network delays and jitter.
Average RTT (ms)
da) 802.11ab) 802.11bc) 802.11gd) Bluetooth
Performance ofwireless networks
Physical layer and medium effects
With radio communication, the physical channel quality is always a source of uncertainty.
Early in the course of our research we took up the task of documenting performance parameters with changing A
verage RTT (ms)
NSF Engineering Research Center for Reconfigurable Manufacturing SystemsUniversity of Michigan College of Engineering
# 18
parameters with changing physical parameters. A tabulated set of results presented here shows the effect of distance and interference on network delays and jitter.
Average RTT (ms)
da) 802.11ab) 802.11bc) 802.11gd) Bluetooth
With increasing interference power With increasing interference power the delays in communication are the delays in communication are bursty and sporadic.bursty and sporadic.
Performance ofwireless networks
Physical layer and medium effects
Another significant factor affecting the physical channel is multipath interference. An experiment shown below measures Bluetooth latency under conditions where there were no reflections and then in a reflection rich environment.
NSF Engineering Research Center for Reconfigurable Manufacturing SystemsUniversity of Michigan College of Engineering
# 19
Facilities and equipmentcourtesy:
Performance ofwireless networks
Physical layer and medium effects
The histograms below show the delay spread for these two runs. The distance between the two devices was fixed at 2 meters (well within the rated distance) and there were no active interference sources (the test chambers provide a -200dB attenuation to the outside world).
The reflections in the second run of the experiment result in an order of magnitude increase in the delay times.
NSF Engineering Research Center for Reconfigurable Manufacturing SystemsUniversity of Michigan College of Engineering
# 20
Performance ofwireless networks
Physical layer and medium effects
NSF Engineering Research Center for Reconfigurable Manufacturing SystemsUniversity of Michigan College of Engineering
# 21
Performance ofPerformance ofwireless networkswireless networks
Precision time Precision time SynchronizationSynchronizationand timeand time--stampingstamping
Protocols and Protocols and software stacksoftware stack
effectseffects
Physical layer Physical layer and medium and medium
effectseffects
Radio coverage Radio coverage mapping formapping formultimulti--cellcell
configurationsconfigurations
Real world Real world performance of performance of
NTP and NTP and IEEE 1588IEEE 1588
Control and Control and Data Acquisition Data Acquisition with low level with low level Time stampingTime stamping
NSF Engineering Research Center for Reconfigurable Manufacturing SystemsUniversity of Michigan College of Engineering
# 22
Network performance simulation
Protocol Stack
Device Measurement• Actual Device Pair• 1 Client 1 Server• Ideal Conditions
Application and Radio Parameters• Node Number• Node Distance• Signal Power• Application Data Requirements
Protocol Stack Delay
Interference Parameters• Coexistence Interference Source• Interference Source Distance• Interference Source Signal Power
or• Interference Model File
Wireless Control Network SimulatorWireless Control Network Simulator
NSF Engineering Research Center for Reconfigurable Manufacturing SystemsUniversity of Michigan College of Engineering
# 23
Protocol Stack Processing Delay
Estimation
Application and Radio Delay Estimation
Interference Delay
• Device Specific Wireless Protocol Stack Delay
• Delays due to arbitration• Link Management dynamics.
• Delay with Interference• Delay Output Graph• Delay output file
Stack Delay
Protocol Stack
Wireless Control Network SimulatorWireless Control Network Simulator
Control SystemSimulation.
NSF Engineering Research Center for Reconfigurable Manufacturing SystemsUniversity of Michigan College of Engineering
# 24
Protocol Stack Processing Delay
Estimation
Application and Radio Delay Estimation
Interference Delay
• Sampling Rate• System Bandwidth• Min RPI
• Optimal Sampling rate.• Ideal packet size.• Packet prioritization and determinism improvement algorithms.
• Failure Modes.• Recovery strategies.• Fault tolerance/ Robustness
Protocol Stack
Wireless Control Network SimulatorWireless Control Network Simulator
Control SystemSimulation.
NSF Engineering Research Center for Reconfigurable Manufacturing SystemsUniversity of Michigan College of Engineering
# 25
Protocol Stack Processing Delay
Estimation
Application and Radio Delay Estimation
Interference Delay
Performance ofPerformance ofwireless networkswireless networks
Precision time Precision time SynchronizationSynchronizationand timeand time--stampingstamping
Protocols and Protocols and software stacksoftware stack
effectseffects
Physical layer Physical layer and medium and medium
effectseffects
Radio coverage Radio coverage mapping formapping formultimulti--cellcell
configurationsconfigurations
Real world Real world performance of performance of
NTP and NTP and IEEE 1588IEEE 1588
Control and Control and Data Acquisition Data Acquisition with low level with low level Time stampingTime stamping
NSF Engineering Research Center for Reconfigurable Manufacturing SystemsUniversity of Michigan College of Engineering
# 26
Tool to predict signal coverage A-priori co-channel interference detectionWireless system health monitoring
Performance ofwireless networks
Radio coverage mapping
Inputs from industry suggest that implementation of wireless will first be at a production cell level. Inter-cell interference is therefore an important factor and requires layout planning ahead of installation.
To support this we are developing a simulation tool capable of predicting radio coverage over a wireless cell. Overlaying spatial representation of radio coverage over the existing cell geometry.
Using data from our performance measurement exercise we can look for
NSF Engineering Research Center for Reconfigurable Manufacturing SystemsUniversity of Michigan College of Engineering
# 27
Using data from our performance measurement exercise we can look for trouble spots in the form of weak fields, shadow zones, interference and leakage outside the cell.
We can also overlay coverage maps of non-conventional radio feeders like the leaky coax cable or directional patch antenna.
Performance ofwireless networks
Radio coverage mapping
NSF Engineering Research Center for Reconfigurable Manufacturing SystemsUniversity of Michigan College of Engineering
# 28
Performance ofPerformance ofwireless networkswireless networks
Precision time Precision time SynchronizationSynchronizationand timeand time--stampingstamping
Protocols and Protocols and software stacksoftware stack
effectseffects
Physical layer Physical layer and medium and medium
effectseffects
Radio coverage Radio coverage mapping formapping formultimulti--cellcell
configurationsconfigurations
Real world Real world performance of performance of
NTP and NTP and IEEE 1588IEEE 1588
Control and Control and Data Acquisition Data Acquisition with low level with low level Time stampingTime stamping
NSF Engineering Research Center for Reconfigurable Manufacturing SystemsUniversity of Michigan College of Engineering
# 29
Time synchronization performance in industrial networks Determining timing accuracy for distributed process control
Firmware
FirmwareController
!
Precision time Synchronization
NTP and IEEE 1588
NSF Engineering Research Center for Reconfigurable Manufacturing SystemsUniversity of Michigan College of Engineering
# 30
Sensor
Network
Firmware
Actuator
Plant
AP 3" away
020406080100120140
1 160 319 478 637 796 955 1114 1273 1432 1591 1750 1909
Packet #
RPI (m
s)
Bluetooth Performance
The testThe test--bedbed
NSF Engineering Research Center for Reconfigurable Manufacturing SystemsUniversity of Michigan College of Engineering
# 31
The testThe test--bedbed
NSF Engineering Research Center for Reconfigurable Manufacturing SystemsUniversity of Michigan College of Engineering
# 32
5000 rpm
The testThe test--bedbed
NSF Engineering Research Center for Reconfigurable Manufacturing SystemsUniversity of Michigan College of Engineering
# 33
The testThe test--bedbed
Wired control
NSF Engineering Research Center for Reconfigurable Manufacturing SystemsUniversity of Michigan College of Engineering
# 34
The testThe test--bedbed
Firmware
Sensor
FirmwareController
NSF Engineering Research Center for Reconfigurable Manufacturing SystemsUniversity of Michigan College of Engineering
# 35
Firmware
Actuator
The testThe test--bedbed
NSF Engineering Research Center for Reconfigurable Manufacturing SystemsUniversity of Michigan College of Engineering
# 36
The testThe test--bedbed
Wireless control
NSF Engineering Research Center for Reconfigurable Manufacturing SystemsUniversity of Michigan College of Engineering
# 37
The testThe test--bedbed
Wired control
NSF Engineering Research Center for Reconfigurable Manufacturing SystemsUniversity of Michigan College of Engineering
# 38
Wireless control
Precision time Synchronization
NTP and IEEE 1588
Two nodes can be precisely synchronized in time to one another
over the network.
This can be done once a real time model of transmission
delays over a network is produced.
Two prevalent techniques for this are NTP and IEEE 1588.
NSF Engineering Research Center for Reconfigurable Manufacturing SystemsUniversity of Michigan College of Engineering
# 39
NTP accuracy ~ 100 µs1588 accuracy ~ <1 µs
are NTP and IEEE 1588.
NTP implements this algorithm as a software daemon running on top the operating system.
IEEE 1588 mandates the use of dedicated firmware to perform
this function.
1588 is amenable to being grafted onto field-bus sensors and actuators.
Precision time Synchronization
NTP and IEEE 1588
Further investigation is required to understand time synchronization accuracy over wireless networks.
Initial experiments with NTP show a large increase in the
New result
NSF Engineering Research Center for Reconfigurable Manufacturing SystemsUniversity of Michigan College of Engineering
# 40
show a large increase in the jitter as estimated by the time synchronization algorithm. This reflects the degree of uncertainty in the system.
Looking at 1588 synchronization over wireless will allow us to justify the need for low level
time synchronization.
Performance ofPerformance ofwireless networkswireless networks
Precision time Precision time SynchronizationSynchronizationand timeand time--stampingstamping
Protocols and Protocols and software stacksoftware stack
effectseffects
Physical layer Physical layer and medium and medium
effectseffects
Radio coverage Radio coverage mapping formapping formultimulti--cellcell
configurationsconfigurations
Real world Real world performance of performance of
NTP and NTP and IEEE 1588IEEE 1588
Control and Control and Data Acquisition Data Acquisition with low level with low level Time stampingTime stamping
NSF Engineering Research Center for Reconfigurable Manufacturing SystemsUniversity of Michigan College of Engineering
# 41
Designing controllers capable of utilizing time stamped dataDesigning hardware with 1588 derived time stampsBest practices for time stamping
Precision time Synchronization
Low level time stamping
Once two nodes are synchronized, time stamping data at the source ensures that even with unknown delays in the transmission, information aboutwhen the event occurred is conserved in a global time frame.
Controller
NSF Engineering Research Center for Reconfigurable Manufacturing SystemsUniversity of Michigan College of Engineering
# 42
Firmware
Sensor
FirmwareController
Network
FirmwareActuator
Precision time Synchronization
Low level time stamping
Once two nodes are synchronized, time stamping data at the source ensures that even with unknown delays in the transmission, information aboutwhen the event occurred is conserved in a global time frame.
Controller
NSF Engineering Research Center for Reconfigurable Manufacturing SystemsUniversity of Michigan College of Engineering
# 43
Firmware
Sensor
FirmwareController
Network
FirmwareActuator
Precision time Synchronization
NTP and IEEE 1588 New result
offset
140
Wired Ethernet
Wireless Ethernet
NSF Engineering Research Center for Reconfigurable Manufacturing SystemsUniversity of Michigan College of Engineering
# 44
-40
-20
0
20
40
60
80
100
120
140
0.2
72
.13
4.0
05
.87
7.7
39
.60
11
.47
13
.33
15
.20
17
.07
18
.93
20
.80
22
.67
24
.53
26
.40
28
.27
30
.13
32
.00
33
.87
35
.73
37
.60
39
.47
41
.33
43
.20
45
.07
46
.93
48
.80
50
.67
52
.53
54
.40
56
.27
58
.13
60
.00
61
.87
63
.73
65
.60
67
.47
69
.33
71
.20
73
.07
74
.93
76
.80
78
.67
80
.53
82
.40
84
.27
86
.13
88
.00
89
.87
Time (minutes)
Tim
e (m
s)
offset
The testThe test--bedbed
Firmware
Sensor
FirmwareController
Position
Real time control using an embedded processor?
•Preemptive scheduling •Hard real-time execution•Minimal interrupt latency
NSF Engineering Research Center for Reconfigurable Manufacturing SystemsUniversity of Michigan College of Engineering
# 45
Firmware
Actuator Speed
•Minimal interrupt latency
Precision time Synchronization
Low level time stamping
NSF Engineering Research Center for Reconfigurable Manufacturing SystemsUniversity of Michigan College of Engineering
# 46
Precision time Synchronization
Low level time stamping
Once two nodes are synchronized, time stamping data at the source ensures that even with unknown delays in the transmission, information aboutwhen the event occurred is conserved in a global time frame.
ControllerPlant
Estimate
NSF Engineering Research Center for Reconfigurable Manufacturing SystemsUniversity of Michigan College of Engineering
# 47
Firmware
Sensor
FirmwareController
Network
FirmwareActuator
Estimate
Real Plant
Precision time Synchronization
Low level time stamping
Sensor
1588 Event 1588 Event TriggeringTriggering
RX/TX packet RX/TX packet parser injectionparser injection
NSF Engineering Research Center for Reconfigurable Manufacturing SystemsUniversity of Michigan College of Engineering
# 48
1588 Event 1588 Event TimestampingTimestamping
1588 regulated 1588 regulated scalalable clockscalalable clock
• As expected with microwave transmissions in closed spaces, multi-path propagation effects dominate system performance.
• There are algorithm improvements that in simulation show appreciable improvement.
• We can predict failure conditions in the physical
Take awaysTake aways
NSF Engineering Research Center for Reconfigurable Manufacturing SystemsUniversity of Michigan College of Engineering
# 49
• We can predict failure conditions in the physical medium banking on our catalog of device tests.
• We have to study the protocol stack from a timing perspective.
• With precise time synchronization and time stamping, control is not wholly dependent on real-time network transmission.
Milestones and Future PlansMilestones and Future Plans
• Development work on Wireless Network Simulator begun.
September 2008
November 2008
February 2009
• Device testing at Ford AMTD
• Completed comprehensive catalog of test results
March 2009 • Design approval for 1588 test-bed
NSF Engineering Research Center for Reconfigurable Manufacturing SystemsUniversity of Michigan College of Engineering
# 50
• First release of the Wireless Network Simulator• 1588 test-bed phase III
• Wireless cell layout tool• 1588 test-bed phase IV
Summer 2009
April 2009• Performance evaluation of wireless protocol stack begun
April 2009 • 1588 test-bed Phase II completed
Fall 2009
1. D. Anand, J. Moyne and D. Tilbury; Performance evaluation of wireless networks for factory2. automation applications, Submitted to Proceedings of the IEEE Conference on Automation,
Science and Engineering, August 20093. D. Anand, J. Moyne and D. Tilbury; Wireless networks for factory automation: Performance
evaluation via analysis and experimentation, Submitted to Transactions of the IJSCC special issue on 'Progress in Networked Control System, 2009
4. N. Kalappa, J Parrott, Y. Li, and J. Moyne. Practical Aspects Impacting Time Synchronization Data Quality in Semiconductor Manufacturing. In Proceedings of the IEEE 1588 Conference,
ReferencesReferences
NSF Engineering Research Center for Reconfigurable Manufacturing SystemsUniversity of Michigan College of Engineering
# 51
Data Quality in Semiconductor Manufacturing. In Proceedings of the IEEE 1588 Conference, October 2006
5. N. Kalappa, J. Baboud, Y. Li, and J. Moyne. Fab-wide Network Time Synchronization –Simulation and Analysis. In Proceedings of the AEC/APC Symposium, September 2007
6. V. Anandarajah, N. Kalappa, R. Sangole, S. Hussaini, Y. Li, J. Baboud, and J. Moyne. Precise7. Time Synchronization in Semiconductor Manufacturing. Proceedings of the IEEE 1588
Conference, October 20078. Semiconductor Manufacturing Equipment Data Acquisition Simulation for Timing Performance
Analysis”, Ya-Shian Li-Baboud, Xiao Zhu, Dhananjay Anand**, Sulaiman Hussaini, and J. Moyne 2008 International IEEE Symposium on Precision Clock Synchronization for Measurement, Control and Communication (ISPCS) 2008, Ann Arbor, Michigan, September 2008.
Thank YouThank You
NSF Engineering Research Center for Reconfigurable Manufacturing SystemsUniversity of Michigan College of Engineering
# 52
Questions?Questions?