OFF-SYSTEM BRIDGE INSPECTION EC-1426

OFF-SYSTEM BRIDGE INSPECTIONEC-1426

T A B L E O F C O N T E N T S

01

02

03

EC-1426, OFF-SYSTEM BRIDGE INSPECTIONOklahoma Department of Transportation

Letter of Interest

Organizational Chart

Experience

CAP 255

FAR Audit

July 31, 2012

Oklahoma Department of TransportationAttn: Ms. Kathy HurstProject Management Division200 N.E. 21st Street, Room 1C-4AOklahoma City, OK 73105-3204

Dear Ms. Hurst:

Cobb Engineering Company has been providing off system bridge inspection services for the Oklahoma Department of Transportation for more than ten years. We are confident that our team’s experience and commitment to excellence will result in your projects exceeding expectations.

WHAT MAKES US DIFFERENT?Cobb was founded in 1921 by the late Fred Cobb. As one of the oldest and most reliable firms in the State of Oklahoma, our clients have come to rely on us for comprehensive services and stability. Cobb only does business in Oklahoma; therefore, your investment in this project is personal for us as well. As you review the information submitted in this proposal and make comparisons of our team with other respondents, we specifically request that you focus on:

• The proven process that will be used on these projects;• Cobb’s commitment to provide ODOT with quality services on time and within budget;• Our desire to continue to be a part of your team.

PROJECT APPROACHCobb has invested in our bridge inspection team to include quality technology, equipment and training. You can depend on Cobb to provide inspections that are completed in accordance with National Bridge Inspection Standards, the ODOT PONTIS Manual, the FHWA Manual “Recording and Coding Guide for the Structure Inventory and Appraisal of the Nation’s Bridges”, latest edition of the “AASHTO Manual for Bridge Evaluation”, and ODOT policies. Cobb meets the special qualifications identified in the solicitation for Project Manager and team leaders.

Please feel free to contact me if you have any questions related to our experience. We look forward to the next step in the consultant selection process, and we hope to maintain a successful relationship with ODOT.

Sincerely,

Sincerely,COBB ENGINEERING COMPANY

Aaron FinleyProject Manager

EC-1426, Off-System Bridge InspectionRe:

LETTER OF INTEREST

W h e r e i n t e l l i g e n t t h i n k i n g l e a d s t o i n n o v a t i v e s o l u t i o n s . . .

0 2ORGANIZATIONAL CHART

QUALITY CONTROLDon Steel, P.E.Taylor Barnes, P.E.

PROGRAM MANAGERAaron Finley, P.E.

DATA ENTRY & REPORTINGMike BaldwinNathan HarrisZach LinamJeff Howell

INSPECTION TEAM LEADERSAaron Finley, P.E.Taylor Barnes, P.E.Greg WilsonMike BaldwinNathan Harris

INSPECTION ASSISTANTSJohnny ChandlerBen Knipstein, E.I.John Hawkins, E.I.

LOAD RATINGSAaron Finley, P.E.Don Steel, P.E.Travis Collins, P.E.Jonathan Hisey, P.E.

0 3EXPERIENCE

OFF-SYSTEM INSPECTION AREASCaddo CountyCarter CountyComanche CountyCotton CountyGrady CountyJefferson CountyLove CountyOklahoma CountyStephens CountyDuncanChickashaOklahoma CityDel CityVillageChoctawPonca City

ON-SYSTEM INSPECTION AREASCaddo CountyComanche CountyCotton CountyGrady CountyStephens County

Statewide Bridge InspectionsOklahoma Department of Transportation

HIGHLIGHTSProject Manager - Aaron Finley, P.E.2 year contractApproximately 3,000 Bridges - On-System & OFF-System

REFERENCEWalt PetersODOT200 N.E. 21st StreetOklahoma City, OK 73105405.521.2606

STATUSOn Going

DESCRIPTIONCEC has contracted with several counties, municipalities and ODOT to provide bridge inspection services for the past 20 years. The type of structures inspected range from small county road structures to the existing I-40 Crosstown Bridge, which is classified as fracture critical, requiring additional expertise in the evaluation of bridges. CEC also provides speciality inspections, such as Truss Bridge Inspections, that require climbing to complete the inspection.

CEC has the first expert climbing bridge inspection team in the state. These individuals are involved in rigorous training to ensure OSHA safety measures are met.

0 4EXPERIENCE

Off-System Bridge Inspection ServicesOklahoma Department of Transportation

HIGHLIGHTSProject Manager - Aaron Finley, P.E.12 CountiesProvided these services on this contract from more than 10 years

REFERENCELynn CobbODOT200 NE 21st StreetOklahoma City, OK 73105-3204580.255.7586

STATUSOn Going

DESCRIPTIONCEC has been providing off-system bridge inspection services for ODOT for more than ten years. We know your standards and procedures and have a well-trained staff and equipment dedicated to these services.

CEC is currently providing off-system bridge inspection services for the following:

GRAND TOTAL = 2,553

Municipalities InspectionsChickasha 28

Duncan 32El Reno 31Guthrie 9

Oklahoma City 571Ponca City 16

Sapulpa 10Stillwater 27

Total 724

Counties InspectionsCaddo 324Carter 200

Comanche 278Cotton 115Grady 305

Jefferson 88Love 62

Oklahoma 165Stephens 292

Total 1,829

0 5EXPERIENCE

Off-System Truss Bridge InspectionsOklahoma Department of Transportation

HIGHLIGHTSProject Manager - Aaron Finley, P.E.Location - StatewideFirst Contract: 2008-2010Second Contract: 2010-2012

REFERENCEWalt PetersODOT200 NE 21st StreetOklahoma City, OK 73105-3204405.521.2606

STATUS2008-2010: 154 inspections on 134 bridges2010-2012: more than 150 inspections on 93 bridges

DESCRIPTIONCobb Engineering performed fracture-critical inspections on off-system truss bridges across the state. As a local presence, we have been able to be responsive to county commissioners’ needs and can be an effective liaison between ODOT and counties. Teamed with Keith Harris (Hazcom Training Services, LLC), who provided rope access training and inspection assistance.

2008 2010Atoka AlfalfaBryan CanadianCaddo GarfieldCarter Kay

Choctaw KingfisherComanche Logan

Craig NobleCreek OklahomaGarvin PayneGrady Woodward

JefersonLogan

MuskogeeNowata

OklahomaOsageOttawaPawnee

Stephens

0 6EXPERIENCE

On-System Truss Bridge InspectionsOklahoma Department of Transportation

HIGHLIGHTSProject Manager - Taylor Barnes, P.E.2 Year ContractLocation - Statewide48 Bridges Inspected28,108 Spans (5.3 Miles)

REFERENCEWalt PetersODOT200 NE 21st StreetOklahoma City, OK 73105-3204405.521.2606

STATUSComplete

DESCRIPTIONCobb Engineering was contracted by ODOT to provide specialized inspection services on truss bridges throughout Oklahoma. These services required special training and the use of equipment that has never been used in Oklahoma before. Cobb teamed with Hazcom and Keith Harris for specialized equipment and ropes training. Cobb now has the first expert climbing bridge inspection team. These individuals are involved in rigorous training to ensure OSHA safety measures are met.

This was the first contract that ODOT has awarded of this kind. The first year included hands-on inspections that included rigging equipment, climbing, the Tracker, and a man lift. The second year involved random spot checks of cracked stringers located during the first year.

0 7EXPERIENCE

Statewide Underwater Bridge InspectionsOklahoma Department of Transportation

HIGHLIGHTSProject Manager - Aaron Finley, P.E.2005-2006: 322 piers, 44 bridges2007-2008: 154 piers, 47 bridges2010-2012: 150 piers, 16 bridgesScheduling and CoordinationDetailed Executive Summary

REFERENCEWalt PetersOklahoma Department of Transportation200 N.E. 21st StreetOklahoma City, OK 73105405.521.2606

STATUSComplete

DESCRIPTIONCobb Engineering Company served as the Program Manager for Statewide Underwater Bridge Inspections from 2005-2008. CEC provided the initial scheduling, data collection and coordination of Infrastructure Engineers, Inc. CEC provided quality control on all inspections that were performed and completed the report phase for the Oklahoma Department of Transportation. CEC implemented a detailed Executive Summary supplying a quick reference for the ODOT review staff.

CEC provided a project team leader to be on the boat with diving personnel. The two teams of CEC and Infrastructure Engineers were completely integrated during this contract. There were no personality clashes and our personnel worked semlessly together to provide quality inspection and report services for the Oklahoma Department of Transportation.

CEC will begin work soon on our recently awarded 2012-2014 contract for statewide underwater bridge inspections.

DCS/CAP - FORM 255 (07/2005) THIS FORM MAY BE COPIED OR COMPUTER GENERATED FORM 255 PAGE 1 OF 72

State of Oklahoma Department of Central Services Construction and Properties

INSTRUCTIONS FOR COMPLETING DCS-CAP FORM 255

DCS-CAP Form 255 is the companion form to CAP Form 254 which permits Architects, Landscape Architects, Engineers and Land Surveyors to respond to invitations to be considered for design projects from the State of Oklahoma. It permits consultants to tailor their response to the specific project being considered by an agency. This form is used in conjunction with DCS-CAP Form 254 in the same manner as Federal Standard Forms 254 and 255 are used for Federal selections. DCS-CAP Form 255 is to be used for a specific project and DCS-CAP Form 254 is used to be registered for consideration. These forms have been designed to be as similar as possible to the Federal forms but SF254 and SF255 MAY NOT be used for State registration and selection. This form is divided into (6) break sections. To easily view where these sections occur, use the “View/Normal” command. The first section contains a table, is unprotected, and allows for the first sheet/instructions to be deleted. The table can be deleted by selecting the whole table and using the “Edit/Cut” command. The second section (Items 1 thru 5a) are protected and contains fields that can be filled in with the appropriate information. The third and fourth sections (Item 6.) are unprotected and don’t contain any fields. This allows for the whole table to be copied and pasted so that additional “Brief resumes…” can be input. The table can be copied by selecting the whole table and using the “Edit/Copy” And “Edit/Paste” commands. The fifth and sixth sections (Items 7, 8, 9, 10) are protected and contain fields that can be filled in. To better assist you in inputting information, you can turn on “Form Field Shading” and “Show Gridlines” using the forms toolbar.

Item 1. Enter the description of the project, as it appears in the letter you received announcing the project. If the agency has used a number to identify the project, include that number. Item 2a. Enter the date of the letter announcing the project. You must reply to the agency as specified, to be considered. This completed form must accompany your letter of interest. Item 2b. Enter the name of the agency from which you received the announcement letter. Item 3. List the legal name and address of the firm or joint- venture submitting this form. Item 3a. All firms, other than individuals practicing under their own license, or joint ventures must be certified by the Oklahoma Board of Registration for Professional Engineers and Land Surveyors or the Oklahoma Board of Governors for Licensed Architects and Landscape Architects. Item 3b. Enter the firm's Tax ID Number. Item 3c. Enter the name, title, and telephone number of the principal representing the firm or joint-venture submitting this form. Item 3d. Enter the address of the office that will perform the work on this project, if it is different from that shown in item 3. Item 4. List the number of personnel, by discipline, to be used on THIS PROJECT. List them only once by primary function. If functions are not shown, add them in the blanks provided. Item 5. If a joint-venture is planned for this project, list the member firms and their respective areas of expertise here. All members must be registered with Construction and Properties. Provide total number of employees permanently employed by the firm listed. Do not include

employees of consultants or sub-consultants. A separate DCS-CAP Form 255 is required for additional consultants or sub-consultants. Item 6. This page is for the resumes of the key personnel. It may be copied as necessary. It should be noted that Oklahoma law requires that design work for Oklahoma projects require the seals of architects and engineers licensed in the State of Oklahoma. Item 7. This page is for the listing of projects accomplished by the (P)artnership, (C)orporation, (J)oint- (V)enture, or (I)ndividual, which best represents the qualifications of the firm for the type of project similar to the one announced. Do not include projects of consultants or sub-consultants. Item 8. This area may be used to provide any other information not covered elsewhere on the form, which is pertinent to this project. List any special qualifications, which are applicable to this project. Item 9. All prospective design consultants must be aware of the quoted section of law from Title 61 of the Oklahoma Statutes. The signature in Item 11 acknowledges that the excerpt has been read. Item 10. A principal of the firm must sign and date the questionnaire for it to be accepted. Original signatures are required. Return this completed form to the agency issuing the invitation with a letter requesting consideration for the proposed project.


STATE OF

OKLAHOMA

1. Project Name/Location for which firm is filing:

July Solicitations Packet

2a. Date of Announcement:

7/10/2012

2b. Agency originating announcement:

ODOT

Consultant Services For A Specific Project

3. Firm (or Joint-Venture) Legal Name and Address:

Cobb Engineering Company 4516 NW 36th Street 15 N 9th Street, Suite 301 4617 E. 91st St South Oklahoma City, OK 73122 Duncan, OK 73533 Tulsa, OK 74137 18314 CR 1557 Ada, OK 74820

3c. Name, Title, & Telephone Number of Principal Contact:

Martin P. Hepp, P.E., President (405) 415-9400

3a. Certificate of Authority Number: 32 3d. Address of office to perform work if different from Item 3:

3b. FEI/Tax ID Number: 73-0760206

4. Personnel by Discipline: (List each person only once, by primary function.) 12 Administrative Economists Mechanical Engineers 3 Airport Engineers

Architects 2 Electrical Engineers Mining Engineers 4 Construction Managers 22 CAD/CADD Technicians 5 Estimators 3 Planners: Urban/Regional 5 Transportation Engineers

Chemical Engineers Geologists 2 Sanitary Engineers 3 Utiliites Coordinator 9 Civil Engineers 1 Hydrologists Soil Engineers 5 Bridge Inspectors

20 Construction Inspectors Interior Designers 7 Specification Writers 8 Energy Technicians 17 Draftsmen Landscape Architects 4 Structural Engineers

Ecologists 3 Land Surveyors 15 Surveyors 150 Total Personnel

5. If submittal is by a JOINT-VENTURE, list participating firms and outline specific areas of responsibility (including administrative, technical and financial) for each firm: All firms and the joint venture MUST be registered with Construction and Properties, Department of Central Services, 2401 N. Lincoln Blvd., Suite 106, P. O. Box 53448, Oklahoma City, OK 73152-3448.

5a. Has this Joint-Venture previously worked together? Yes No If YES, how many times?


6. Brief resume of key persons, specialists, and individual consultants employed by sub-consultants anticipated for THIS PROJECT. a. Name and Title:

James D. Cobb, P.E., P.L.S. – Director

a. Name and Title:

Martin P. Hepp, P.E. - President b. Project Assignment:

Quality Control/Quality Assurance

b. Project Assignment: Principal-In-Charge

c. Name of firm with which associated: Cobb Engineering Company


d. Years experience: With this firm 51 With other firms 0 d. Years experience: With this firm 27 With other firms 2 e. Education: Degree(s)/Year/Specialization

BS in Civil Engineering, 1959, Oklahoma State University MS in Civil Engineering, 1960, Oklahoma State University

e. Education: Degree(s)/Year/Specialization BS in Civil Engineering, 1984, University of Oklahoma

f. Active Registration: State/Year first registered/Discipline/Oklahoma License Number Oklahoma, 1963, P.E., 5720 Oklahoma, 1968, L.S., 19

f. Active Registration: State/Year first registered/Discipline/ Oklahoma License Number Oklahoma, 1990, P.E., 16032

Oklahoma Certificate of Authority (if any) 32 Oklahoma Certificate of Authority (if any) 32 g. Other experience and qualifications relevant to the proposed project:

Mr. Cobb is responsible for Directing the Quality Assurance of each project produced by Cobb Engineering Company. He ensures that Cobb Engineering’s core values are upheld in every design, plan sets, contract documents, reports, and presentations. Jim encourages a “learning environment” for engineers in training, inspectors, surveyors, and other professional opportunities within the organization. Mr. Cobb is experienced with project management, planning, and feasibility studies for highways, turnpikes, bridges, drainage facilities, sanitary sewers, water distribution, surveys, traffic signalization, traffic studies, and land development. Some of Jim’s clients include the Oklahoma Department of Transportation, Oklahoma Transportation Authority, Oklahoma Department of Mines, City of Oklahoma City, Cities of Weatherford, Clinton, Elk City, Edmond, and Stillwater, University of Oklahoma, Oklahoma State University, Langston University, and the Counties of Custer, Oklahoma, Johnston, Murray, Cleveland, Ellis, Atoka, McClain, Logan, and Payne, as well as the U.S. Government: Tinker Air Force Base, Fort Sill Military Reservation, Oklahoma Air National Guard, and Altus Air Force Base. Mr. Cobb is an active member in the American Society of Civil Engineers, Oklahoma Society of Professional Engineers, American Consulting Engineers Council (served as National Director), Consulting Engineers Council of Oklahoma (past President), the American Public Works Association, Oklahoma Society of Land Surveyors and the Oklahoma Heartland Rotary. Mr. Cobb received the Bill Skeith Stewardship Award in 2004 from the Oklahoma Good Roads and Transportation Association. He also received the Distinguished Vocational Award in 2004 from the Heartland Rotary. He is a Member of the Oklahoma State University College of Engineering, Architecture and Technology Hall of Fame and Oklahoma State University Alumni Hall of Fame.

g. Other experience and qualifications relevant to the proposed project: Mr. Hepp is responsible for the supervision and administration of all projects for Cobb Engineering Company. He joined Cobb Engineering in 1984. He has served as president since 1991 and managing partner since 1997. His responsibilities include the project management of large projects, business development, business management and supervision of the day-to-day operations of Cobb Engineering Company. His clients include the Oklahoma Department of Transportation, Oklahoma Transportation Authority, Oklahoma Conservation Commission, Cities of Oklahoma City, Fairview, Clinton, and Bartlesville, Oklahoma and Choctaw Counties and the Natural Resource Conservation Service (NRCS) Mr. Hepp is an active member in the American Society of Civil Engineers and the American Council of Engineering Companies (ACEC) of Oklahoma, as well as the National Society of Professional Engineers. He is an active participant within the Oklahoma City Chamber of Commerce. He serves on the steering committee for partnering with ODOT and ACEC.


6. Brief resume of key persons, specialists, and individual consultants employed by sub-consultants anticipated for THIS PROJECT. a. Name and Title: J. Taylor Barnes, P.E. – Vice President a. Name and Title: Matthew Chernicky – Right-Of-Way Team Leader, Environmental

Coordinator b. Project Assignment:

Technical Quality Assurance

b. Project Assignment: Right-Of-Way Team Leader/ Environmental Coordinator /CAD Technician



d. Years experience: With this firm 13 With other firms 1 d. Years experience: With this firm 10 With other firms e. Education: Degree(s)/Year/Specialization

BS in Civil Engineering, 1998, Oklahoma State University

e. Education: Degree(s)/Year/Specialization Certified CAD Specialist, Francis Tuttle Vo-Tech

f. Active Registration: State/Year first registered/Discipline/Oklahoma License Number Oklahoma, 2003, P.E., 21098

f. Active Registration: State/Year first registered/Discipline/Oklahoma License Number


Mr. Barnes is responsible for the coordination and project management of transportation and right-of-way/land acquisition projects. He coordinates CAD Technicians and project teams to accommodate client schedules. He is experienced in all aspects of transportation design. His clients include the Oklahoma Department of Transportation, Oklahoma Transportation Authority, Cities of Oklahoma City, Norman, Weatherford and Moore. He assists in county projects and manages some BIA transportation projects. His Indian Nation clients include the Chickasaw Nation, Citizen Pottawatomie Nation, Apache and Kiowa Tribes and the Bureau of Indian Affairs. Mr. Barnes is an active member of the American Society of Civil Engineers and the Civil Engineering Council of Oklahoma. Projects include, but are not limited to geometric design, drainage analysis, hydrologic and hydraulic studies, environmental clearance and engineering studies, pavement design, traffic signal plans, and review of geotechnical studies for design. All of this culminates in the development of detailed design plans to be let to contract for construction. I-40 Crosstown Realignment, Oklahoma City, Oklahoma – Project Manager for the I-40 Crosstown realignment through downtown Oklahoma City. Mr. Barnes was responsible for the entire design of the corridor including roadway, bridge, traffic, drainage and utility design.

g. Other experience and qualifications relevant to the proposed project: Mr. Chernicky is responsible for producing working plans from preliminary stage through final plans. He is proficient in the process of right-of-way engineering including: plotting ownerships from title abstracts, writing legal descriptions for warranty deeds, developing right-of-way plans, plot plans, misery reports, and other right-of-way design and planning functions. Mr. Chernicky is currently working with the Oklahoma Department of Transportation for On Demand Right-of-Way services for the Right-Of-Way Division. He assists in the development and production of all plan documents and provides support services to the transportation, county, municipal, planning, and airport teams at CEC. He also is responsible for coordinating Environmental Specialists and compiling Specialists reports with other researched data to create an Environmental Document and is currently working with the Oklahoma Department of Transportation for On Demand Planning and NEPA services and On Demand CIRB NEPA services for the Environmental Division. Mr. Chernicky is proficient in the use of Autodesk AutoCAD software, and uses EaglePoint, MicroStation, InRoads, Google Earth Professional and the MS Office Suite. He is an active member in the Francis Tuttle CADD/CAM Advisory Committee.


6. Brief resume of key persons, specialists, and individual consultants employed by sub-consultants anticipated for THIS PROJECT. a. Name and Title: Travis Collins, PE, Team Leader, Structural Engineering a. Name and Title: Aaron Finley, PE. – Project Engineer , Structural b. Project Assignment:

Structural Engineering Design

b. Project Assignment: Structural Engineering Design




MS in Civil Engineering, 2003, Oklahoma State University (Structures)

e. Education: Degree(s)/Year/Specialization BS in Civil Engineering, 2004, Oklahoma State University MS in Civil Engineering, 2006, Oklahoma State University (Structures)

f. Active Registration: State/Year first registered/Discipline/ Oklahoma License Number Oklahoma/2006/PE No. 22794

f. Active Registration: State/Year first registered/Discipline/Oklahoma License Number Oklahoma/ 2010/ PE No. 24264


Mr. Collins, a project manager with eight years of experience in bridge/structural design, has designed a variety of types of structures, including bridges, parking garages, and building structures. He has worked with various construction materials, including reinforced concrete, prestressed concrete, wood, masonry and steel. Prior to joining Cobb Engineering Company he was a project manager with an Oklahoma City based structural engineering design firm. He is responsible for the design, damage inspection, and plan development for construction or rehabilitation of the previously mentioned structure types His clients have included

Oklahoma Department of Transportation Oklahoma Turnpike Authority City of Oklahoma City Integris Baptist Medical Center Numerous architectural firms, and Numerous civil engineering design firms.

Mr. Collins is currently a member of

Oklahoma Structural Engineers Association American Institute of Steel Construction American Society of Civil Engineers and American Concrete Institute.

g. Other experience and qualifications relevant to the proposed project: Mr. Finley participates in the design and inspection of bridges for Cobb Engineering Company’s Bridge Division and serves on the Truss Bridge Inspection Climbing Team. He is an ODOT certified bridge inspector and is experienced in rope access, is ropes certified, and has completed ladder training. He has completed classes “FHWA-NHI-130055: Safety Inspection of In-Service Bridges” and “FHWA-NHI-130078: Fracture Critical Inspection Techniques for Steel Bridges.” He is also well versed in hydraulic modeling using HEC-RAS and is proficient in the use of AutoCAD, Microsoft Office Suite and bridge design software including LEAP, MDX, BAR7, and BRASS-Culvert. Mr. Finley’s representative project experience includes:

US270/SH3, Seiling, OK, Division 6 Load Posted Bridges US283, Harper Co., OK, Bridge over Spring Creek Harvard Avenue/Joe Creek Bridge Rehabilitation, Tulsa, OK I-35, Indian Hills Road to Main Street, Norman, OK, Three Bridges US-287, Boise City, OK, Two Bridges SH-66, Creek Co., OK, Two bridges over Sand Creek, US-60 Craig Co., OK, Two bridges on over Big Cabin Creek, Statewide, OK, On-System Fracture Critical Truss Inspection Statewide, OK, Off-System Fracture Critical Truss Inspection,


6. Brief resume of key persons, specialists, and individual consultants employed by sub-consultants anticipated for THIS PROJECT. a. Name and Title: Jonathan Hisey, P.E. - Engineer a. Name and Title: Jeffery D. Howell - CAD Technician b. Project Assignment:

Civil Engineer

b. Project Assignment: Transportation Division – Bridge Design





e. Education: Degree(s)/Year/Specialization Associates in applied science-CAT/CAD / 2010 / OCCC CAD Technician Certification / 2009 / Francis Tuttle Technology Center CAD Specialist Certification / 2010/ Francis Tuttle Technology Center

f. Active Registration: State/Year first registered/Discipline/ Oklahoma License Number Oklahoma, 2008, P.E. 23127

f. Active Registration: State/Year first registered/Discipline/ Oklahoma License Number


Mr. Hisey serves as project engineer in transportation design. His experience prior to joining Cobb Engineering Company, was as construction engineer on roadway and bridge projects for the Kansas Department of Transportation and as project design engineer for a large national A&E firm.

His responsibilities include hydraulic and drainage analysis, bridge design, general structural design, and electrical transmission line design. Current clients include the Oklahoma Department of Transportation, Oklahoma County, Oklahoma Gas & Electric and the City of Oklahoma City. His representative experience includes:

ODOT Maintenance Facilities, Statewide: Designed multiple prototype structures for totally new ODOT maintenance facilities. Structures included salt storage building, fuel pump canopy, salt/sand spreader racks and foundations for several pre-engineering metal buildings.

US 281 over Relay Creek: New 133’ single span P.C. Beam Bridge and two RCB extensions.

Council Road over Deer Creek and Soldier Creek: New 150’ three span P.C. Beam Bridge and a rehabilitation of a 100’ three span I-Beam Bridge. Project included multiple hydraulic analysis simulations of drainage structure configurations and roadway elevations to improve the overtopping frequency of Council Road.

NW 164th Street, Western Ave. to Pennsylvania Ave., Oklahoma City, OK: Street widening project, two to four lanes, plus intersection improvements with signalization. Project included two at grade bridge size RCBs.

Film Exchange District Streetscape, Downtown Oklahoma City, OK: New concrete pavement, sidewalks, storm sewer, traffic signals, street lighting, decorative intersection design and landscaping.

g. Other experience and qualifications relevant to the proposed project:

Mr. Howell provides CAD technical support to various Divisions at Cobb Engineering Company. His support is representative by the following:

Taking information from the Bridge Design Engineer and putting it in detailed design plan form,

Revamping and updating City and County District maps for Bridge Inspections,

Input of bridge inspection information into the Pontis program,

Providing support in

All aspects of Transportation Design

Power Distribution and Transmission Power Line Restoration

.


6. Brief resume of key persons, specialists, and individual consultants employed by sub-consultants anticipated for THIS PROJECT. a. Name and Title: Ben Knipstein, E.I.

a. Name and Title: Tyler Nottnagel - Draftsman

b. Project Assignment: Engineering Intern, Project Engineer Technician

b. Project Assignment: AutoCAD Technician



d. Years experience: With this firm 1 With other firms d. Years experience: With this firm 3 With other firms e. Education: Degree(s)/Year/Specialization

B.S. in Civil Engineering, 2009, Texas Tech University M.S. in Civil Engineering, 2011, Northwestern University

e. Education: Degree(s)/Year/Specialization Mid America Technology Center – 2 Year CAD Certification

f. Active Registration: State/Year first registered/Discipline/ Oklahoma License Number Texas, 2011 (2009 exam), E.I.T., No. 45635



Mr. Knipstein is involved in Transportation Design and Structural Design at Cobb Engineering Company. His responsibilities and duties have required him to work closely with project managers, engineers, and technicians on various projects. He has utilized his engineering education by performing engineering calculations, executing design operations, and demonstrating problem solving abilities. He has worked on on a variety of projects for cities, counties, and the State of Oklahoma. Mr. Knipstein, as a project engineer technician, is responsible for assisting the project manager with project design, plan production, and communication during the design process. Projects representative of his experience with ODOT include:

I44 Over Lynn Lane, Tulsa, Oklahoma. Project Engineer Technician. Structural Design of a three span PC beam conventional bridge. Design Includes Phased construction. State Bridge Rehabilitations, State of Oklahoma. Project Engineer Technician. Structural rating and design for rehabilitation of existing bridge structures.

g. Other experience and qualifications relevant to the proposed project: Mr. Nottnagel is involved in all phases of the production of construction plans, from conceptual through final design. He assists with all divisions at Cobb Engineering Company. His computer skills include:

AutoCAD 2008

AutoCAD 2009

AutoCAD 2011

Microsoft Word

Microsoft Excel


6. Brief resume of key persons, specialists, and individual consultants employed by sub-consultants anticipated for THIS PROJECT. a. Name and Title: Reece Pryor, CAD Technician a. Name and Title: Bryan W. Richards, P.E. – Division Manager b. Project Assignment:

CAD Technician b. Project Assignment:

Project Manager/ Project Engineer



d. Years experience: With this firm 2 With other firms d. Years experience: With this firm 8 With other firms 11.5 e. Education: Degree(s)/Year/Specialization

Associates in Computer Aided Design





Proficient in the use of AutoCAD 2009, Mr. Pryor has developed three-dimensional drainage plans for surveying of bridges, RCB’s and other piped facilities. This work also included determining of drainage areas for these sites. Mr. Pryor’s project experience has included:

Rock Creek Road over I-35 bridge in Norman, OK

US 281 over North Canadian River in Watonga, OK

US 281 over North Canadian O’Flow in Watonga, OK

Western Avenue Widening over Deep Fork in Oklahoma City, OK

Penn over WW Steel rail spur in Oklahoma City, OK

Off System and On System bridge inspection filing.

Hwy 64 to I-244 on ramp in Tulsa, OK

US 270 over Persimmon Creek in Woodward County

Several Construction management Sod comparisons


Mr. Richards is responsible for the management of the municipal and private land development divisions at Cobb Engineering Company. His responsibility includes the supervision of personnel (drafting technicians, project managers, and team leaders) to accomplish client goals, project deliverables, and to meet schedules. He is experienced in all aspects of public works and private development. His clients include municipalities, architects, and private developers.

His representative project experience includes:

ODOT Maintenance Facility Study and Prototypical Building Design, Statewide Description: Statewide maintenance facility study and prototypical building designs for the Oklahoma Department of Transportation. Study and design consisted of site visits to each ODOT division, preparation of site adaptations and conditional building prototypes. Site adaptations elements included, land acquisition, site preparation, concrete and asphalt paving, vehicle movements, utilities, public sewer and water connection, storm water detention basin, evaporation ponds, and fuel station design. Preliminary structural plans for additional buildings including, salt sheds and equipment/truck storage were also developed.

Armed Forces Reserve Center, Muskogee, Oklahoma Description: Thirty four acre Design Build project for a 50 acre tract of land for the Oklahoma Military Department. Work included developing a 93,000 SF Main Facility, 6,700 SF Maintenance Facility, 300+ private vehicle parking spaces, 180,00 SF military equipment yard, wash bay facility and fuel containment area. Project includes full utility design (water, sanitary sewer and storm drainage/detention). Project complies with LEED NC 2.2 requirements.


6. Brief resume of key persons, specialists, and individual consultants employed by sub-consultants anticipated for THIS PROJECT. a. Name and Title: Toby Baker, P.E., L.S.I. – Project Manager a. Name and Title: Jason Davis, Design Technician b. Project Assignment:

Airport Division Project Team Leader

b. Project Assignment: Design & Drafting




BS in Civil Engineering/2007/Oklahoma State University

e. Education: Degree(s)/Year/Specialization , 2 year CAD Certification, 1998, Platt College

f. Active Registration: State/Year first registered/Discipline/ Oklahoma License Number Oklahoma, 2007, P.E., 25491 Oklahoma, 2008, L.S.I. 123



Mr. Baker, an instrument rated commercial pilot in both single and multi-engine aircraft, serves as Project Manager in Cobb Engineering Company's Airport Division. He is responsible for the design and coordination of all Airport Planning and Design projects under the direction of the Division Manager. Having worked extensively for Cobb Engineering Company's Survey Division during high school and college, he can facilitate timely delivery of survey data for his projects.

He has completed several Airport Layout Plans, and is familiar with the ever-changing Federal Aviation Regulations and Advisory Circulars. He knows what is required for airport sponsors to secure FAA funding, and provides grant administration services for each of his FAA funded projects.

Mr. Baker’s representative project experience includes: Construct Parallel Taxiway, Okmulgee Regional Airport. This project consisted of the construction of a new parallel taxiway system at a strength matching that of the existing runway. The 10 month project was phased so that the runway was only closed for a total of 30 days.

Widen, Extend and Light Runway 17-35, Thomas Municipal Airport. Designed the widening, extension and lighting of the full runway, installation of Precision Approach Path Indicators, and coordinated an obstruction survey in support of the development of new instrument approaches.

Rehabilitate Runway 17-35, Bartlesville Municipal Airport. Coordinated the construction management and administration for the overlay of the runway and partial reconstruction of the connecting taxiways, and installation of new runway lighting.

g. Other experience and qualifications relevant to the proposed project: Mr. Davis is responsible for the designing and drafting of construction plans for Cobb Engineering Company projects which included private, city, county, state and federal clients. He is proficient in the use of AutoCAD up to Versions 2011 & in AutoCAD Civil 3D 2011. His representative project experience includes: Design Build Experience: Muskogee Armed Force Reserve Center Municipal Experience: Meridian Road in Carter County (Street Widening Project) Oklahoma Avenue in Oklahoma City (One Way - Two Way Conversion) ODOT Experience: Port of Entry, Beckham County, OK Subdivisions Kingsway Housing Addition in Yukon, OK Bella Mira Gated Community, Oklahoma City, OK Commercial

Tulsa Hills Shopping Center – 300 acre site, Tulsa, OK (Target, JC Penney, Belks, Lowes, Best Buy, McDonalds) University Town Center, 300 acre site, Norman, OK Shoppes at Del City (layout of parking & utilities, Buffalo Wild Wings) Several CVS Stores in the Oklahoma Market Penn Crossing, Oklahoma City, OK Waffle House, Midwest City, OK Steak ‘N Shake, Edmond, OK Ted’s Escandido, Norman, OK Senior Assisted Living Center, Midwest City, OK Katy Bike & Pedestrian Trail, Oklahoma City, OK


6. Brief resume of key persons, specialists, and individual consultants employed by sub-consultants anticipated for THIS PROJECT. a. Name and Title: Brian Griffith – Technician a. Name and Title: Kyle L. Morse, E.I. – Project Engineer Technician b. Project Assignment:

Production Support

b. Project Assignment: Design




Architectural Technology Associates A.A.S., 2006 Oklahoma State University, OKC

e. Education: Degree(s)/Year/Specialization Bachelors in Civil Engineering / May 2010 / Oklahoma State University


f. Active Registration State/Year first registered/Discipline/ Oklahoma License Number Oklahoma / 2010 / EI / 14583


Mr. Griffith is responsible for the designing and drafting of construction plans for numerous Cobb Engineering projects which have included private, city, county, state and federal clients. He has a working knowledge of the drafting guidelines for these various client types and is proficient in the use of AutoCAD Map 2009, Civil 3D 2009, Civil 3D 2011, and Sketchup Pro version 7 and 8. Mr. Griffith’s recent project experience has included:

Bella Mira Gated Community in North OKC University Town Center, 300 acre site in Norman, OK The Bridges of Spring Creek, 30 acre site in Edmond, OK Crystal Beach, site, water, and sewer design for Woodward, OK Colonnade Shopping Center, Commercial Site, NW OKC Mid America Bible College, Oklahoma City, OK Armed Forces Reserve Center, Muskogee, OK MidDel Christian School, Del City, OK Mark Aldridge, Residential, Oklahoma City, OK ODOT Maintanence Facilities, Div 2, Div 6, and Div 7 Heartland Bible College, Site design in NW OKC Putnam Heights Elementary, MAPS for Kids, NW OKC WC-0468 42” water main, NW OKC SC-0772 sanitary sewer relief lines SE OKC PC-0375 Britton Road widening, NW OKC ODOT Port of Entry Beckham County Oklahoma Mangum Scott Field, re-grade asphalt apron, Mangum OK Okmulgee Regional Airport, stripe Runway, light Taxiway, Okmulgee, OK ODOT Maintenance Facilities: Div. 02 McAlester, OK, Div. 06 Shattuck, OK And Div. 07 Walters, OK Bartlesville Municipal Airport, Design and Grading for Proposed Apron and Hangar Enid Woodring Airport, Design and Grading for Proposed Aprons and Hangars


Mr. Morse serves as project civil engineer technician and assists the project manager with project design, planning, coordination and communication. to produce detailed design plans, specifications and estimates. He is skilled in the use of Autodesk’s Civil 3D computer design software. His representative project experience includes

WC-0468 42” Phase I Water Main Extension, Oklahoma City. A water main from inside the Lake Hefner Water Treatment Plant extending to the west to provide additional supply and redundancy in the City’s water distribution system. Major elements of the design include minimizing impact to existing utilities and roadways while also ensuring that Lake Hefner Dam is not negatively impacted. Construction on Phase II is currently underway and being facilitated by CEC, while Phase one is in design.

PC-0375 Britton Road Widening, Oklahoma City. Paired together with Phase I of WC-0468, this project widens Britton Road between Macarthur and Rockwell from a 2 lane to a 4 lane road. A Drainage study for the project area was carried out so that inlet hoods and grates could be properly sized and located to keep water off of the proposed roadway and meet demand during heavy storm events.

I-40 Exit 82 Area Traffic Study, Weatherford, Oklahoma. Weatherford has seen significant economic growth in the southeast portion of the city and expects more in the near future. The purpose of the study was to determine whether or not the increase in traffic in this area of Weatherford merits new construction to alleviate traffic congestion and if so, how that might best be accomplished.

Washington Avenue Sidewalk Design, Weatherford, Oklahoma. This is a project to provide a pedestrian rout from W. Main Street north to Weatherford High School on Washington Avenue. Primary goals with this project are providing a safe, accessible path designed so that finished grades and ramps meet ADA requirements while actively minimizing cost and impact to the City.


6. Brief resume of key persons, specialists, and individual consultants employed by sub-consultants anticipated for THIS PROJECT. a. Name and Title: David J. Littlejohn - Specialist a. Name and Title: Patrick Solomon, Airport Inspector/Design Technician b. Project Assignment:

Production Support

b. Project Assignment: Airport Inspector/Design Technician



d. Years experience: With this firm 5 With other firms d. Years experience: With this firm 1 With other firms 4 e. Education: Degree(s)/Year/Specialization

A.A.S. in Computer Aided Technology, CAD/Manufacturing/Architectural. (2006) BA in Geography with an emphasis on Geographic Information Systems. (2011)

e. Education: Degree(s)/Year/Specialization BA/2009/Corllins University


f. Active Registration: State/Year first registered/Discipline/Oklahoma License Number U.S. Army Corps of Engineers Contractor Quality Control Certification Environmental Protection Agency Certified Type I, II. Type II Hazardous Waste Certified Confined Space Entry Certified Lift Certified (i.e., Boom lift, Scissor lift, 1 man lift, articulating lift). Fork Lift Instructors Certified OSHA 30


Mr. Littlejohn provides design and drafting support for the Transportation, Municipal, and Airport divisions of Cobb Engineering which have included projects for the Oklahoma Department of Transportation, the Department of Central Services, and the Department of Public Services. He also provides map creation and GIS data processing support for GPS survey projects and is proficient in the use of AutoCAD Map, and ArcGIS. Mr. Littlejohn’s recent project experience and work elements have included:

ODOT Fiber Optic GIS development ODOT Sign Inventory NRCS – GIS boundary data processing Map Creation Data Processing Quality Assurance


Mr. Solomon’s responsibilities in the Airport Division of Cobb Engineering Company is to provide technical support during the design phase and inspection and oversight during construction. Prior to joining Cobb Engineering Company, he served as construction inspector for Tinker AFB and was responsible for the construction management of projects which included inspection, and construction oversight. As such he was responsible for alterations, maintenance and repair projects on buildings, streets, runways, utility systems and all other real property. installed He coordinated all engineering decisions with the lead project engineer, Corp of Engineers, Facility Users, and the project subcontractors. He is experienced in both Design/Build and Bid/Build projects with the Corp of Engineers as the base liaison.

Mr. Solomon also served as the Airfield Driving Program Manager where he was responsible for all of Corp of Engineers Airfield Drivers on Tinker AFB. His duties included: verifying the need of training for unit personnel, providing initial, annual refresher, and re-certification training, to over 500 Airfield drivers in our program. He conducted or provided practical airfield orientation, including day and night time rides on the ramps and airfield. He administered the written and airfield diagram tests, provided color vision tests and directed light gun signal recognition training. When all requirements have been met, he prepared and submitted AF Form 483t. His duties included the maintaining the unit’s portion of Tinker airfield driving database online and maintaining a unit airfield driver’s program continuity binder with all required materials included.


6. Brief resume of key persons, specialists, and individual consultants employed by sub-consultants anticipated for THIS PROJECT. a. Name and Title: Darren M. Smith, P.L.S. – Vice President a. Name and Title: Jared Bechtol - Survey Technician b. Project Assignment:

Survey Division Manager – Quality Control/Quality Assurance

b. Project Assignment: Survey Crew Member, Drafting Support



d. Years experience: With this firm 14 With other firms 12 d. Years experience: With this firm 0.5 With other firms 0 e. Education: Degree(s)/Year/Specialization

Southwestern Oklahoma State University, 1982-1983 Platt College, 1984-1985 Oklahoma City Community College, 1986

e. Education: Degree(s)/Year/Specialization B.S in Agricultural Sciences and Natural Resources from Oklahoma State University in Stillwater, OK

f. Active Registration: State/Year first registered/Discipline/ Oklahoma License Number Oklahoma, 2002, L.S., 1552


Oklahoma Certificate of Authority (if any) 32 Oklahoma Certificate of Authority (if any) 32 g. Mr. Smith directs the survey division for CEC. He is responsible for the coordination and

review of all survey projects for both Cobb Engineering Company and direct clients. He coordinates projects in both the Oklahoma City and Tulsa offices for several clients including the following:

Oklahoma Department of Transportation Municipalities Counties Natural Resources and Conservation Service Oklahoma Aeronautics Commission Architects Educational Institutions including Oklahoma State University, Mid America Bible

College and Mustang Public Schools Mr. Smith oversees the production for a variety of surveys including:

Boundary, property, lot, subdivision and ALTA/ASCM surveys Topographic surveys Route and Utility surveys Site Development and Architectural surveys Roadway, bridge and airport design surveys Construction and Right-of-Way Staking

Mr. Smith is also responsible for maintaining communication with co-workers, clients and the public while performing the surveys as well as generating proposals, cost estimates and schedules.

g. Other experience and qualifications relevant to the proposed project: Mr. Bechtol serves as a Survey Technician and is responsible for support of the Survey Party Chief to complete projects for several clients including the following:

Oklahoma Department of Transportation Oklahoma Transportation Authority Municipalities Counties Natural Resources and Conservation Service Oklahoma Aeronautics Commission Architects Educational Institutions including Oklahoma State University, Mid America Bible

College and Mustang Public Schools Mr. Bechtol is also responsible for field preparation and post-processing as well as the field work for a variety of surveys including:

Boundary, property, lot, subdivision and ALTA/ASCM surveys Topographic surveys Route and Utility surveys Site Development and Architectural surveys Roadway, bridge and airport design surveys Construction and Right-of-Way Staking GIS


6. Brief resume of key persons, specialists, and individual consultants employed by sub-consultants anticipated for THIS PROJECT. a. Name and Title: Shane Carroll - Survey Technician a. Name and Title: Abdulnabe Abdulrahman – Survey Technician b. Project Assignment:

Survey Crew Member, Drafting Support

b. Project Assignment: Production Support



d. Years experience: With this firm 4 (part-time) With other firms 0 d. Years experience: With this firm 1 With other firms e. Education: Degree(s)/Year/Specialization

Finishing a bachelor’s degree in business management at the University of Central Oklahoma in the fall of 2012. Also, plan to pursue a degree in Civil Surveying from Oklahoma State University in Oklahoma City.

e. Education: Degree(s)/Year/Specialization




Mr. Carroll serves as a Survey Technician and is responsible for support of the Survey Party Chief to complete projects for several clients including the following:


College and Mustang Public Schools Mr. Carroll is also responsible for field preparation and post-processing as well as the field work for a variety of surveys including:


g. Other experience and qualifications relevant to the proposed project: Mr. Abdulrahman serves as a Survey Technician and is responsible for support of the Survey Party Chief to complete projects for several clients including the following:


College and Mustang Public Schools Mr. Abdulrahman is also responsible for field preparation and post-processing as well as the field work for a variety of surveys including:



6. Brief resume of key persons, specialists, and individual consultants employed by sub-consultants anticipated for THIS PROJECT. a. Name and Title: Bartley W. Estes – GIS Specialist a. Name and Title: Joe Farmer, PLS – Oklahoma City Survey Branch Manager/Survey

Party Chief b. Project Assignment:

Production Support

b. Project Assignment: Project Manager/Survey Party Chief/Drafting Support



d. Years experience: With this firm 1.5 With other firms d. Years experience: With this firm 5 With other firms 10 e. Education: Degree(s)/Year/Specialization

BA in Cartography and Geography with an emphasis in Geotechniques (2011)

e. Education: Degree(s)/Year/Specialization BS in Aviation Sciences, Oklahoma State University (Minor in Marketing) USAF, Basic Military Training(Honor Graduate)/Tech School(Command and Control)/ANG-Academy of Military Science(Distinguish Graduate)


f. Active Registration: State/Year first registered/Discipline/Oklahoma License Number Oklahoma, 2012, PLS, 1799


Mr. Estes provides design and drafting support for the Transportation, Municipal, and Airport divisions of Cobb Engineering which have included projects for the Oklahoma Department of Transportation. He also provides map creation and GIS data processing support for GPS survey projects and is proficient in the use ArcGIS. Mr. Estes’s recent project experience and work elements have included:

ODOT Sign Inventory NRCS – GIS Boundary Info Processing Map Creation Data Processing Quality Assurance

g. Mr. Farmer is the Survey Branch Manager for the CEC Oklahoma City Branch office. His primary role is to serve as Project Coordinator and/or Party Chief for projects for several clients including the following:

Oklahoma Department of Transportation Oklahoma Transportation Authority Municipalities and Counties Natural Resources and Conservation Service Oklahoma Aeronautics Commission Architects Educational Institutions

Mr. Farmer is responsible for managing survey crews, equipment and draftsmen along with performing a variety of surveys including:


Mr. Farmer is also responsible for maintaining communication with co-workers, clients and the public while performing the surveys as well as generating proposals, cost estimates and schedules.


6. Brief resume of key persons, specialists, and individual consultants employed by sub-consultants anticipated for THIS PROJECT. a. Name and Title: William Biles – Survey Technician a. Name and Title: Adam Hinds, PLS – Survey Party Chief/Technician b. Project Assignment:

Production Support

b. Project Assignment: Survey Party Chief/Survey Technician/ Quality Control - Tulsa



d. Years experience: With this firm >1 With other firms d. Years experience: With this firm 5 With other firms 0.5 e. Education: Degree(s)/Year/Specialization

e. Education: Degree(s)/Year/Specialization Associates in Civil/ Survey Technology, 2007, Oklahoma State University-SW, OKC


f. Active Registration: State/Year first registered/Discipline/Oklahoma License Number Oklahoma, 2002, PLS, 1781


Mr. Biles serves as a Survey Technician and is responsible for support of the Survey Party Chief to complete projects for several clients including the following:


College and Mustang Public Schools Mr. Billes is also responsible for field preparation and post-processing as well as the field work for a variety of surveys including:



Mr. Hinds is Assistant Survey Manager for Cobb Engineering Company. His primary role is to serve as Project Coordinator and/or Party Chief for projects for several clients including the following:


College and Mustang Public Schools

He is responsible for managing survey crews, equipment and draftsmen along with performing a variety of surveys including:


Mr. Hinds is also responsible for maintaining communication with co-workers, clients and the public while performing the surveys as well as generating proposals, cost estimates and schedules.


6. Brief resume of key persons, specialists, and individual consultants employed by sub-consultants anticipated for THIS PROJECT. a. Name and Title: Samuel McGee - Survey Technician a. Name and Title: Eric Mentzer, Survey Technician b. Project Assignment:

Survey Crew Member, Drafting Support

b. Project Assignment: Survey Technician, Drafting Support



d. Years experience: With this firm 0.5 With other firms 1 d. Years experience: With this firm 1 With other firms 3.5 e. Education: Degree(s)/Year/Specialization

Pursuing degree in Civil Surveying from Oklahoma State University in Oklahoma City

e. Education: Degree(s)/Year/Specialization AAS in Architectural Drafting & Design, 2006, Oklahoma State University-OKC



Oklahoma Certificate of Authority (if any) Oklahoma Certificate of Authority (if any) g. Other experience and qualifications relevant to the proposed project:

Mr. McGee serves as a Survey Technician and is responsible for support of the Survey Party Chief to complete projects for several clients including the following:


College and Mustang Public Schools Mr. McGee is also responsible for field preparation and post-processing as well as the field work for a variety of surveys including:


g. Other experience and qualifications relevant to the proposed project: Mr. Mentzer serves as a Survey Technician and is responsible for support of the Survey Crew to complete projects for a variety of clients such as


College and Mustang Public Schools Mr. Mentzer is also responsible for field preparation and post-processing as well as the field work for a variety of surveys including:



6. Brief resume of key persons, specialists, and individual consultants employed by sub-consultants anticipated for THIS PROJECT. a. Name and Title: Robert Rockers – Geographic Information Systems Manager a. Name and Title: Corey D. Simmons, Survey Technician b. Project Assignment:

Geographic Information Systems Manager

b. Project Assignment: Survey Crew Member, Drafting Support




BA in Business Administration & Computer Science, 2000, Drury University


f. Active Registration: State/Year first registered/Discipline/ Oklahoma License Number Red Hat Certified Engineer # 803004149910637


Oklahoma Certificate of Authority (if any) 32 Oklahoma Certificate of Authority (if any) 32 g. Mr. Rockers manages Geographic Information System (GIS) projects for Cobb

Engineering Company where he provides coordination and development support for all GIS and information systems. He is additionally responsible for maintaining communication with co-workers, clients, and the public while performing his GIS services. Mr. Rocker also participates in proposal development, cost estimating, and scheduling. Mr. Rockers has four years of experience architecting enterprise grade n-tier applications and six years as a software engineer and project manager. He has more than 3 years experience working with and developing Geographic Information Systems. He has more than ten years of experience in software development. Mr. Rockers’ GIS services project experience and work elements include:

Data Collection Digitization & Geoprocessing CAD/GIS Conversion Digital Quality Assurance Multimedia Collection and Geotagging. Reporting and Data Mining Software Development and Scripting

Prior to joining the Cobb Engineering Company team, Mr. Rockers worked for the Department of Public Safety where he wrote the Department’s web publishing policy, designed the agency’s application development infrastructure, and was project manager for their x86 software development team.

g. Other experience and qualifications relevant to the proposed project: Mr. Simmons serves as a Survey Technician and is responsible for support of the Survey Crew to complete projects for a variety of clients such as


College and Mustang Public Schools He is also responsible for field preparation and post-processing as well as the field work for a variety of surveys including:



6. Brief resume of key persons, specialists, and individual consultants employed by sub-consultants anticipated for THIS PROJECT. a. Name and Title: Rebecca Robichaux, CAD Technician a. Name and Title: Tanner Wentworth – Survey Party Chief/Crew Member/Technician b. Project Assignment:

Survey Technician, Drafting Support

b. Project Assignment: Survey Party Chief/Drafting Support/CAD Technician



d. Years experience: With this firm >1 With other firms d. Years experience: With this firm 4 With other firms 0 e. Education: Degree(s)/Year/Specialization

e. Education: Degree(s)/Year/Specialization Associates in Civil/Survey Technician/Oklahoma State University-OKC Pursing a BS in Civil/Survey




Ms. Robichaux serves as a Survey Technician and is responsible for support of the Survey Crew to complete projects for a variety of clients such as


College and Mustang Public Schools Ms. Robichaux is also responsible for field preparation and post-processing as well as the field work for a variety of surveys including:


g. Other experience and qualifications relevant to the proposed project: Mr. Wentworth serves as a survey Party Chief and his primary role is to lead survey field crews on projects for several clients including the following:




Mr. Wentworth also assists in generating proposals and fee estimates.


6. Brief resume of key persons, specialists, and individual consultants employed by sub-consultants anticipated for THIS PROJECT. a. Name and Title: Firouz Mollaian, P.E. – Civil Engineer a. Name and Title: Don Steel, P.E. – Transportation Division Manager b. Project Assignment:

Bridge Inspection

b. Project Assignment: Division Manager/Staff Engineer/Project Manager/




Oklahoma State University


f. Active Registration: State/Year first registered/Discipline/ Oklahoma License Number Oklahoma, P.E., 8153



Mr. Mollaian, retired from Oklahoma Department of Transportation where he was an Bridge Division Engineering Manager, serves on Cobb Engineering Company’s Bridge Inspection Team. He has completed the NHI Bridge inspection course and NHI Fracture Critical Members bridge inspection course. As member or bridge inspection team he has performed on-system truss bridge inspections and is an active inspector for the I-40 cross-town bridge inspections. Mr Mollaian’s representative project experience includes:

Northwest Passage Bridges, OK Interstate-44 Bridges, Tulsa, OK US-62 Bridges, Lawton, OK

g. Other experience and qualifications relevant to the proposed project: Mr. Steel serves as the Transportation Division Manager. He has extensive experience with state, county, municipal highway projects. He is involved in all aspects of a highway projects including planning, environmental clearances, estimating, design, hydrology, drainage, right-of-way, utility coordination and bidding services. He has knowledge of materials, methods and techniques used in design, construction and maintenance of highways, bridges and related structures. Mr. Steel also has served as project manager and project engineer for various transportation projects. He is experienced in all aspects of transportation design. Mr. Steel’s current clients include the Oklahoma Department of Transportation – Local Government Division, City of Oklahoma City, Bureau of Indian Affairs, Garvin, Caddo, Carter, Choctaw, Comanche, Cotton, Grady, Jefferson, Love, Murray, Oklahoma and Stephens counties. Mr. Steel is an active member of the American Society of Civil Engineers and American Council of Engineering Companies.


6. Brief resume of key persons, specialists, and individual consultants employed by sub-consultants anticipated for THIS PROJECT. a. Name and Title: Amanda Baker, E.I. – Project Coordinator, Design Technician a. Name and Title: Mike Baldwin – Technician/Bridge Inspector b. Project Assignment:

Technician

b. Project Assignment: Production Support/CAD Technician/Bridge Inspection Program



d. Years experience: With this firm 2.7 With other firms 1.5 d. Years experience: With this firm 8 With other firms 3 e. Education: Degree(s)/Year/Specialization



f. Active Registration: State/Year first registered/Discipline/ Oklahoma License Number Oklahoma, 2012, E.I., 14941

f. Active Registration: State/Year first registered/Discipline/ Oklahoma License Number 2004 licensed Bridge Inspector


Mrs. Baker is involved in roadway and bridge design, with an emphasis on hydrology and hydraulic analysis for several projects. She has also performed various types of traffic analysis, and has been very involved in the Reconnaissance Data projects for ODOT. She has assisted in the Environmental Clearance and documentation process including public meetings. She has developed National Environmental Policy Act (NEPA) documents from research and has performed field visits in the coordination and production of special studies. Mrs. Baker has been trained in the use of the Federal Highway Administration Traffic Noise Model (FHWA TNM) 2.5. She understands noise modeling concepts and knows how to set up projects, perform the analysis, and present the results. She is currently participating in the Sign Inventory project for ODOT as an assistant project manager, providing QA/QC in the project. She also coordinates project activities including collection of sign data, incorporating information and aerial photography into the GIS database for the ODOT staff’s use.

g. Other experience and qualifications relevant to the proposed project: Mr. Baldwin is responsible for data entry (using the PONTIS program), preparing reports on bridge inspections, drafting of working plans from preliminary stages through final plans. He is proficient in the use of AutoCAD and EaglePoint software, and is a licensed bridge inspector for the state of Oklahoma. His Project experience has included:

ODOT Division 7, various eagle point projects in

ODOT Division 7, Off-system county bridge inspections

On Sytem Bridge Inspections:

o I-44

o I-35

County Bridge Inspections: Caddo, Comanche, Cotton, Grady, Oklahoma & Stephens

Oklahoma City, Bridges inspections

Special Truss Bridge Inspections


6. Brief resume of key persons, specialists, and individual consultants employed by sub-consultants anticipated for THIS PROJECT. a. Name and Title: John Chandler –Bridge Inspection Assistant/Survey Technician a. Name and Title: G. Wayne Clark , CAD Technician b. Project Assignment:

Bridge Inspection Assistant / Survey Crew Member

b. Project Assignment: CAD Technician Utility Coordinator




BA in Communication, 1992, University of Oklahoma

e. Education: Degree(s)/Year/Specialization AS Architectural Technologies – 2009 – Oklahoma State University at Oklahoma City




Mr. Chandler assists Greg Wilson with bridge inspection services for the county system. This includes both on and off-system inspections. Cobb Engineering Company provides these inspection services for state, municipal and county clients. Mr. Chandler has attended ODOT QC/QA session in 2007 & 2008 to further his education in Bridge Inspection. Mr. Chandler also serves as a Survey Technician and is responsible for support of the Survey Party Chief to complete projects for several clients including the following: • Oklahoma Department of Transportation • Oklahoma Transportation Authority • Municipalities • Counties • Natural Resources and Conservation Service • Oklahoma Aeronautics Commission • Architects • Educational Institutions including Oklahoma State University, Mid America Bible College and Mustang Public Schools

g. Other experience and qualifications relevant to the proposed project: Mr Clark assist in coordinating the office work for Bridge Inspection Reporting. He has 1 year of experience in Utility Coordination and 2 years of experience with the production of County and BIA Roadway & Bridge plans. He is proficient in the use of AutoCAD Civil 3D, Eagle Point and Pontis Lite. Project experience has included:

Radio Tower Road, Caddo County, OK

Lee Boulevard, Comanche County, OK

Oswalt Road, Love County, OK

Noble Wray, Jefferson County, OK

Sara Road, Grady County, OK

Several county bridge replacement projects

Numerous Bridge Inspection Reports in 12 counties and 13 municipalities


6. Brief resume of key persons, specialists, and individual consultants employed by sub-consultants anticipated for THIS PROJECT. a. Name and Title: Nathan Harris – Bridge Inspection Assistant / Rope Access

Technician a. Name and Title: Zachary Linam – Design Technician

b. Project Assignment: Bridge Inspection




d. Years experience: With this firm 0.75 With other firms 0 d. Years experience: With this firm 5 With other firms e. Education: Degree(s)/Year/Specialization

Emergency Medical Technician – Basic,2008, Oklahoma City Community College

e. Education: Degree(s)/Year/Specialization CADD Specialist Certificate, 2005, Canadian Valley Technology Center Theocratic Ministry School, 1998 - Present




Mr. Harris participates in Cobb Engineering Company’s bridge inspection services for the county system, including both on and off-system inspections. These inspection services are provided for state, municipal and county clients. He has also participated in Cobb Engineering Company’s Underwater bridge inspection services for state clients. Mr Harris’ project experience includes:

On-System Fracture Critical Bridge Inspection On-System Routine Bridge Inspection Off-System Fracture Critical Bridge Inspection Off-System Fracture Critical Bridge Inspection Underwater Bridge Inspection

g. Other experience and qualifications relevant to the proposed project: Mr. Linam has supported numerous divisions of Cobb Engineering Company whose clients have included private, city, county, state and federal entities. Mr. Linam has more than two years experience working with a team of engineers to produce bridge design plans for ODOT as well as county entities. He has been responsible for CAD drafting support from preliminary stages through to final plans. He has over one year of experience working with OG&E creating electrical circuit rehabilitation plans using ArcFm Designer. His current assignment involves regular use of PONTIS to record and prepare bridge inspection assessments while working closely with field personnel. Mr. Linam’s computer skills include:

AutoCAD Civil 3D 2011 ArcFM Designer PONTIS GIMP 2.0 Microsoft Word Microsoft Excel

Mr. Linam’s recent project experience and work elements have included:

Bridge Design Support OG&E System Hardening Projects PONTIS Database for ODOT Map Creation with AutoCAD Data Processing Quality Assurance


6. Brief resume of key persons, specialists, and individual consultants employed by sub-consultants anticipated for THIS PROJECT. a. Name and Title: Jessica Miller, CAD Technician a. Name and Title: Greg Newton – Lead Technician b. Project Assignment:

CAD Technician

b. Project Assignment: CAD Production Team Leader



d. Years experience: With this firm 1.25 With other firms 1 d. Years experience: With this firm 3 With other firms 7.5 e. Education: Degree(s)/Year/Specialization

BFA, 2007, University of Central OK

e. Education: Degree(s)/Year/Specialization Drafting and Design, 1999, Platt College Pursuing degree at Oklahoma State University, Oklahoma City

f. Active Registration: State/Year first registered/Discipline/ Oklahoma License Number n/a



Ms. Miller assists the design technician &/or engineer in executing plans for transportation projects. Her responsibilities includes, but are not limited to calculating and presenting quantities for all aspects of the projects, managing drainage structures, preparing plan & profile drawings as well as cross sections in order to accurately communicate the engineer's proposed design.

With approximately 2 years of experience in the civil engineering field she has worked in the areas of transportation, municipal and land development, pool design, and bridge inspection. She utilizes AutoCAD Civil 3D 2011 to interpolate field data for ODOT plans and platting. In addition to plan production her duties include data entry, and technical assistance.

Ms. Miller’s computer skills include:

AutoCAD Civil 3D 2011

AutoCAD Map 2009 & earlier versions

AutoCAD Architecture 2011 & earlier versions

MicroStation V8i

Eagle Point 2010 & earlier versions

Microsoft Excel

Microsoft Publisher

Microsoft Word

Power Point

g. Other experience and qualifications relevant to the proposed project: Mr. Newton serves as the Production Team Leader for the Oklahoma City office of Cobb Engineering Company. He is proficient in the use of

AutoCAD Map 2005 Civil 3D EaglePoint Microstation, Inroads.

His project experience has included various Oklahoma Department of Transportation Roadway projects such as

I-40 Crosstown, Oklahoma City I-35/US-77, Cleveland Co. US Highway 59, Adair County US 270/US 183, Woodward Co. US 270/SH 3, Dewey Co. US 281/ US 270, Blaine Co. US 287, Cimarron Co. SH 32, Love Co. US 281, Woods Co. SH 15, Noble Co. NS-270 CIRB, Cotton Co. BR.


6. Brief resume of key persons, specialists, and individual consultants employed by sub-consultants anticipated for THIS PROJECT. a. Name and Title: Erica Nottnagel, E.I. a. Name and Title: Danny Powell, E.I. b. Project Assignment:

Project Engineer

b. Project Assignment: Project Engineer




B.S. in Civil Engineering/2010/Oklahoma State University

e. Education: Degree(s)/Year/Specialization BS Civil Engineering, 2009, University of Oklahoma

f. Active Registration: State/Year first registered/Discipline/Oklahoma License Number Oklahoma E.I. No. 14650

f. Active Registration: State/Year first registered/Discipline/Oklahoma License Number Oklahoma, 2009, E.I., 14420

Oklahoma Certificate of Authority (if any) 32 Oklahoma Certificate of Authority (if any) 32


Mrs. Nottnagel has 3 years of experience in drafting and design. While at CEC she has utilized AutoCAD 2009, along with EaglePoint, to produce plans for multiple projects.

Generated hydraulic models and sized drainage pipes using HEC-RAS and HY-8.

Composed an Environmental Categorical Exclusion (CE) report and researched property owners for right-of-way work.

Calculated earthwork, roadway and bridge quantities for various projects.

g. Other experience and qualifications relevant to the proposed project: Mr. Powell has more than 10 years of experience in drafting and design of roadway, bridges, drainage, pavement, signage and construction sequencing projects. His site design experience includes grade, drainage and utilities. His experience also includes 3 years of materials testing and 2 years of construction inspection. His representative project experience includes:

John Kilpatrick Turnpike, Oklahoma City, Oklahoma. Construction inspection on P.C. beam bridges, signing and striping. Deer Creek Wastewater Treatment Plant, Oklahoma City, Oklahoma. Construction inspection on expansion of the wastewater treatment plant. I-40 Crosstown, Oklahoma City, Oklahoma. Drafting, design and plan production for new construction from just west of May Ave. to just east of Penn Ave. S.H. 51, Stillwater, Oklahoma. Drafting, design and plan production for new construction of divided highway and five-lane curb and gutter from Country Club Road to Western Ave. S.H. 54, Hooker, Oklahoma. Drafting, design and plan production for new construction of divided highway, four-lane curb and gutter. S.H. 54, Woods County, Oklahoma. Drafting, design and plan production for new construction of new alignment for replacement of load posted bridge structures. Noble County Jail, Noble County, Oklahoma. Drafting, design, coordination and plan production for civil drawings for new construction of county jail facility. Pawnee Jail, Pawnee Oklahoma. Drafting, design, coordination and plan production for civil drawings for new construction of county jail facility. Morgan Road, Oklahoma City, Oklahoma. Drafting, design and plan production for new construction of five-lane curb and gutter from SW 15th to SW 29th. Oliver Park, Oklahoma City, Oklahoma. Drafting, design and plan production for new construction of City Park and flood overflow facility.


6. Brief resume of key persons, specialists, and individual consultants employed by sub-consultants anticipated for THIS PROJECT. a. Name and Title: Russell Steel – Technician III a. Name and Title: Ed Stroud – Assistant Branch Manager, Duncan b. Project Assignment:

Design Technician

b. Project Assignment: Technical Design




e. Education: Degree(s)/Year/Specialization B.A., 1971; Masters of Regional and City Planning, 1973



Oklahoma Certificate of Authority (if any) 32 Oklahoma Certificate of Authority (if any) g. Other experience and qualifications relevant to the proposed project:

Mr. Steel is responsible for providing technical drafting support and design for the Transportation Division of Cobb Engineering Company. He has also served as a Survey Technician and Bridge Inspection assistant. Typical of his Oklahoma Department of Transportation projects are

US Highway 281 in Watonga, US Highway 287 in Boise City. Interstate 35 through Norman

His Bureau of Indian Affairs, County, and Oklahoma City projects include

Radio Tower Road, Council Road, Sara Road, and 164th street from Western to Penn.

Mr. Steel is proficient in the use of the following equipment and programs. Trimble 5700 rtk GPS Survey Units Topcon Total Station AutoCAD Map 2011 AutoCAD 2009 AutoCAD 2011 Land XML Eagle Point 2010 HEC-RAS Civil 3D 2011 HY-8 Guide Sign Carlson 2009 Visual Lighting Software Bentley InRoads V8i Bentley Microstation V8i Estimator

g. Other experience and qualifications relevant to the proposed project: Mr. Stroud is primarily involved the production of county roadway,bridge and right-of-way plans for a total of 9 counties. He is proficient in the use of AutoCAD Map and Eaglepoint software. His Project experience has included:

Radio Tower Road, Caddo County, OK

Lee Boulevard, Comanche County, OK

Noble Wray Road, Jefferson County, OK

Homer-Francis Road, Pontotoc County, Chickasaw Nation

Numerous county bridge replacement projects


6. Brief resume of key persons, specialists, and individual consultants employed by sub-consultants anticipated for THIS PROJECT. a. Name and Title: Justin R. Willis, E.I.

a. Name and Title: Greg Wilson – Bridge Inspector


b. Project Assignment: Bridge Inspection Team Leader/Survey Party Chief




B.S. in Civil Engineering, 2010, Oklahoma State University

e. Education: Degree(s)/Year/Specialization Oklahoma Baptist University, 1982-83

f. Active Registration: State/Year first registered/Discipline/ Oklahoma License Number Oklahoma, 2006, E.I., No. 14496

f. Active Registration: State/Year first registered/Discipline/Oklahoma License Number OK, 2000, Highway Construction Materials Technician, No. 2238 ODOT Certified Bridge Inspector, 2005 NBIS Fracture Critical Class, 2007


Mr. Willis is involved in Construction Management and Transportation Design at Cobb Engineering Company. His responsibilities and duties have required him to work closely with project managers, engineers, and technicians on various projects. He has utilized his engineering education by performing field measurements and engineering calculations, executing design operations, and demonstrating problem solving abilities. He has worked on on a variety of projects for cities, counties, and the State of Oklahoma. Mr. Willis, as a project engineer technician, is responsible for assisting the project manager with project design, plan production, and communication during the design process. Projects representative of his experience with ODOT include:

U.S. 281/270 in Blaine County, Watonga, Oklahoma. Project Engineer Technician responsible for production of plans for grading, draining, and surfacing 2.3 miles of divided highway south of Watonga. S.H. 32 in Love County, Marietta, Oklahoma. Design of plans to reconstruct 8 miles of 2-lane highway west of Marietta. Design includes overlay sections as well as offset alignments for full depth reconstruction. Interstate 35 in Kay County, Braman, Oklahoma. Project Engineer Technician responsible for production of roadway plans for grading, draining, and surfacing of I-35 north and south of S.H. 177.

g. Other experience and qualifications relevant to the proposed project: Mr. Wilson is responsible for all bridge inspections including on-system, off-system, county, municipal, fracture critical and underwater for Cobb Engineering Company. He also served as a Survey Party Chief for the Survey Division and as a construction management inspector. Provides drafting support as needed, and is proficient in the use of the following survey and bridge inspection equipment: Pontis Snooper trucks, lifts

Trimble 5700 rtk GPS Survey Units Topcon Total Station Data Collectors for all Field Equipment Dell Laptop – Field Computer AutoCAD, Microstation and EaglePoint Microsoft Project for Scheduling

. His Project experience has included:

Bridge Inspections: 12 counties, 13 municipalities including City of Oklahoma City, Crosstown, On and Off-system truss inspections.

Survey: Numerous municipal, state, Indian, NRCS, and private surveys including topographic, boundries, and construction staking.

Construction inspector: Danforth and Santa Fe and 15th street in Edmond, Hefner Road between Rockwell and Council in OKC, NE 63th street Bridge in OKC, and State Capital Complex.


6. Brief resume of key persons, specialists, and individual consultants employed by sub-consultants anticipated for THIS PROJECT. a. Name and Title: Dwain Brown, County Marketing a. Name and Title: Veldo Goins, P.E. – Project Engineer b. Project Assignment:

Project Laison, Quality Control

b. Project Assignment: Quality Control Bridge Plans/Underwater Bridge Inspection




Oklahoma State Tech,. Drafting Certificate




Oklahoma Certificate of Authority (if any) Oklahoma Certificate of Authority (if any) 32 g. Other experience and qualifications relevant to the proposed project:

Mr. Brown serves on Cobb Engineering Company’s County Transportation Team. He previously worked for the Local. Government Division of ODOT for almost 23 years. His representative project experience includes:

Local. Government Division project quality control, and project management for all phases of the projects from initial programming to bid letting.

g. Other experience and qualifications relevant to the proposed project: Mr. Goins, formerly Assistant Director of Preconstruction in ODOT’s Bridge Division, assists with bridge inspections and quality control for bridge designs at Cobb Engineering Company. He is responsible for the quality control coordination of bridge inspection reports and ensures that they are completed according to ODOT’s standards. He occasionally serves as an on-site resident engineer for inspection services. He currently provides quality control for the I-40 Crosstown fracture critical bridge inspections in Oklahoma City, as well as the Underwater Bridge Inspection program which Cobb Engineering administers for the Oklahoma Department of Transportation.


6. Brief resume of key persons, specialists, and individual consultants employed by sub-consultants anticipated for THIS PROJECT. a. Name and Title: Sid Terry, P.E. – Project Engineer a. Name and Title: Tommy Bond, Technician 1 b. Project Assignment:

Electrical Design

b. Project Assignment: Designer/Map Editor


c. Name of firm with which associated: Cobb Engineering Cobb Engineering Company


BS Electrical Engineering, University of Oklahoma

e. Education: Degree(s)/Year/Specialization Oklahoma University/2007-2008/Film Studies East Central University/2008-2009/Cartography Oklahoma City University/2010-Present/Film Production




Mr. Terry, retired from OG&E, has served as Cobb Engineering Company’s lead engineer on the following projects:

2008 Transformer Load Management (TLM) project 2008 Underground proactive cable replacement project, PCB no-load transformer project System Hardening Transmission Restoration

He has directed Cobb Engineering Company’s transition to using ArcFM Designer software in the design and production of projects. While with OG&E, Mr. Terry served as a Manager of Major Distribution Projects for most of his years in the Power Delivery Department (Electric Services) of OG&E. He also was the Project Leader of the GIS Implementation team for Electric Services. He has been involved with engineering projects that include

Downtown network Automatic Throw Over (ATO) system, Reliability projects, System projects in Oklahoma and Western Arkansas.

Mr. Terry also has experience serving as a resource for OG&E

Development of their GIS system, Participating in the Capacitor power factor project in 2008, 2009, Program Coordinator for the ODOT Sign Inventory Project.

g. Other experience and qualifications relevant to the proposed project: Mr. Bond studied Cartography at East Central University, learning how to use the ArcFM Program to create maps, to learn about GIS and many other map-making techniques. At Cobb Engineering, Mr. Bond uses the ArcFM Program to create and edit maps for use in gathering and recording field data. He also uses the Designer aspect of ArcFM, to create project products for submittals for OG&E. Some of Mr. Bond’s recent projects include:

Map Creation for Sara Rd, Haymaker Substation

Map Creation for 50 +/- Substation projects for OG&E.

Creation of a training PowerPoint for new Power Division employees.

Completion of a nearly 6,000 sheet aerial scanning job for ODOT.


6. Brief resume of key persons, specialists, and individual consultants employed by sub-consultants anticipated for THIS PROJECT. a. Name and Title: Tara L. Brandon, Electrical Engineer In Training, Level 3 a. Name and Title: Matthew Gray – Technician 1 b. Project Assignment:

Engineer in Training – Power Transmission and Distribution

b. Project Assignment: System Hardening



d. Years experience: With this firm 2.5 With other firms 0 d. Years experience: With this firm 1 With other firms e. Education: Degree(s)/Year/Specialization

B.S. in Electrical Engineering, 2003, University of Oklahoma


f. Active Registration: State/Year first registered/Discipline/ Oklahoma License Number Oklahoma / 2009 / EI 14308



Ms. Brandon is proficient in the use of: ArcFM/Designer Deuces MicroStation ProjectWise

Ms. Brandon has served as project engineer technician at Cobb Engineering Company on the following recent projects:

OG&E - Transformer Load Management (TLM) project OG&E - PCB no-load transformer project OG&E - Distribution System Hardening project OG&E - Watt-Var Meter project for System Protection & Control Oklahoma Department of Transportation – Sign inventory project


Mr. Gray supports the engineering design work for distribution and System Hardening by utilizing ArcFM/Designer. He has also collected field data for System Hardening. His recent System Hardening projects have included:

Classen Substation System Hardening, Oklahoma County, OK

Valley View Substation System Hardening, Pontotoc County, OK

Southgate Substation System Hardening, Oklahoma County, OK

Westoaks Substation System Hardening, Oklahoma County, OK


6. Brief resume of key persons, specialists, and individual consultants employed by sub-consultants anticipated for THIS PROJECT. a. Name and Title: Matthew Greenhaw – Engineer Intern -1 a. Name and Title: Randall Knowles Technician b. Project Assignment:

Engineer in Training Power Transmission and Distribution

b. Project Assignment: Power Transmission and Distribution



d. Years experience: With this firm 0.5 With other firms 0 d. Years experience: With this firm .5 With other firms e. Education: Degree(s)/Year/Specialization

BS in Electrical Engineering, 2011, University of Oklahoma

e. Education: Degree(s)/Year/Specialization B.S. in Mass Communications, Olivet Nazarene University, 2009

f. Active Registration: State/Year first registered/Discipline/Oklahoma License Number f. Active Registration: State/Year first registered/Discipline/Oklahoma License Number


Mr. Greenhaw supports the engineering design work for distribution and System Hardening by utilizing ArcFM/Designer. He has also collected field data for System Hardening. His recent projects have included:

System Hardening Voltage Conversions

g. Other experience and qualifications relevant to the proposed project: Mr. Knowles has been involved with transmission restoration and system hardening projects for OG&E. He has also been involved with a sign inventory project for the Oklahoma Department of Transportation. He is proficient in the use of Microstation


6. Brief resume of key persons, specialists, and individual consultants employed by sub-consultants anticipated for THIS PROJECT. a. Name and Title: Greg Lewellen – Survey Technician a. Name and Title: Shawn C. Lovett – Project Coordinator b. Project Assignment:

GIS Survey, Power Pole Inspection Survey Crew Member, Drafting Support, Bridge Inspection Assistant




d. Years experience: With this firm 8 With other firms d. Years experience: With this firm 5 With other firms e. Education: Degree(s)/Year/Specialization

Associates in Architecture, 1982, Oklahoma State University - OKC

e. Education: Degree(s)/Year/Specialization Oklahoma City Community College – 1 Year towards design degree Youth Ministry and Education, 2005, Mid America Christian University




Mr. Lewellen serves as a Survey Technician and is responsible for support of the Survey Party Chief to complete projects for several clients including the following:


College and Mustang Public Schools . OG&E Mr. Lewellen is also responsible for field preparation and post-processing as well as the field work for a variety of surveys including:

Boundary, property, lot, subdivision and ALTA/ASCM surveys Topographic surveys Route and Utility surveys Site Development and Architectural surveys Roadway, bridge and airport design surveys Construction and Right-of-Way Staking GIS Power Utility Inspection and Restoration

g. Other experience and qualifications relevant to the proposed project: Mr. Lovett coordinates the project flow between Cobb Engineering Company and OG&E. He is proficient in the use of

AutoCAD Map 2005, EaglePoint, AutoCAD 2006, Pontis, Microstation, ArcFM/Designer Deuces.

He has been involved in system hardening, transformer load management (TLM), proactive cable replacement, PCB contaminated transformers and capacitor power factor program. Some of Mr. Lovett’s’s recent projects include:

Circuit Conversions

System Hardening

Transformer Load Management

Underground Cable Replacement

Transmission Restoration

Underground Vault Work


6. Brief resume of key persons, specialists, and individual consultants employed by sub-consultants anticipated for THIS PROJECT. a. Name and Title: Jeff Myers - Design Tech 2 a. Name and Title: J. Nolan Randolph Technician b. Project Assignment:

Design Drafter

b. Project Assignment: Power Transmission and Distribution



d. Years experience: With this firm 1.25 With other firms d. Years experience: With this firm 3 Months With other firms e. Education: Degree(s)/Year/Specialization

Oklahoma City Community College – 1 Year towards design degree Francis Tuttle - CAD Specialist Certificate

e. Education: Degree(s)/Year/Specialization B.S. in Industrial Safety, University of Central Oklahoma, 2004




Mr. Myers is proficient in the use of

AutoCAD 2008,

Projectwise, and

Microstation.

At Cobb Engineering Company, he creates and edits Transmission drawings. He has been involved in Transmission Restoration and System Hardening. Some of Mr .Myers’ recent projects include:

PEC TransCanada Transmission Line, Coal County, OK

Exchange Ave Relocation, Oklahoma County, OK

g. Other experience and qualifications relevant to the proposed project: Mr. Randolph has been involved in System Hardening, Field Transmission inspections, and 4kV Conversion projects for OG&E. Has been involved with sign inventory project for the Oklahoma Department of Transportation. Has been a part of field crew performing surveys for National Resource Conservation Service and Airport Design. Mr. Randolph has knowledge in the use of ArcFM/Designer and Deuces Mr. Randolph also has experience in the safety profession as an trainer of all required OSHA topics, DDC 8 Defensive Driving, and First Aid and CPR. Has Performed numerous field audits and was part of a Confined Space Rescue Team.


6. Brief resume of key persons, specialists, and individual consultants employed by sub-consultants anticipated for THIS PROJECT. a. Name and Title: Kim D. Stewart, Contractor a. Name and Title: Mark Blundell - Contractor

b. Project Assignment: Transmission Restoration / ODOT Sign Inventory

b. Project Assignment : Transmission Line Relocation, New Line Design, Transmission Restoration



d. Years experience: With this firm 1.2 With other firms d. Years experience: With this firm 2 With other firms 35

e. Education: Degree(s)/Year/Specialization e. Education: Degree(s)/Year/Specialization 3 years of college-no degree

f. Active Registration: State/Year first registered/Discipline/ Oklahoma License Number f. Active Registration: State/Year first registered/Discipline/ Oklahoma License Number

Oklahoma Certificate of Authority (if any) Oklahoma Certificate of Authority (if any) 32

g. Other experience and qualifications relevant to the proposed project: At Cobb Engineering Company, Mr. Stewart has been contracted to

Inspect Transmission & Distribution Lines,

Aid in the design of new Transmission Lines,

Assemble packets for restoration projects for OG&E,

Inventory ODOT right of way signs.

g. Other experience and qualifications relevant to the proposed project: Mr. Blundell has been responsible for the design and construction document preparation for:

3.5 miles of wood, single pole 69kV Line to radial feed an oil field substation Approximately 20 miles of line that included:

o 3 miles of wood, single pole 138kV o Approximately 15 miles of adding a horizontal bundled, 345kV construction

circuit that operated at 138kV to an existing double circuit 345kV tower line utilizing a vacant circuit position

o 1.5 miles of base plated, double circuit 69/138kV steel pole construction which included distribution underbuild

o This line terminated at three substations Approximately 2 miles of 69/138kV line that reconfigured the 69kV system and

constructed new 138kV line sections to serve a new 138kV substation Designed the recon and restoration project for 44 miles of a wood, single pole, 69kV

line Designed the recon and restoration of a 20 mile wood, H-Frame, 345kV line Managed contractors that performed wood pole restoration for various line segments

over a 2 year period Relocated approximately 4 miles of steel, 69kV single pole line with distribution

underbuild to accommodate the road widening of a state highway Constructed new line segments and converted approximately 6 miles of 69kV line to

138kV line in conjunction with a conversion project of 4 substations Coordinated with Manufacturer Field Consultants for the repair and replacement of an

oil filled UG transmission cable at a local Air Force Base Numerous projects to install 69-161kV switches to provide service to new substations

or line taps in conjunction with new construction Numerous small projects to relocate 69-345kV transmission lines due to bridge and

road widening projects Provided design and field investigation for storm restoration due to small or

significantly large storms. Voltages ranged up to 345kV


6. Brief resume of key persons, specialists, and individual consultants employed by sub-consultants anticipated for THIS PROJECT. a. Name and Title: George “Mike” Gevaza, P.E. – Electrical Engineer a. Name and Title: Jim Locke – Contractor b. Project Assignment:

Electrical Instrumentation Design

b. Project Assignment: Power Transmission & Distribution Engineering



d. Years experience: With this firm 1 With other firms 35 d. Years experience: With this firm .25yrs. With other firms; Oklahoma Gas & Electric Co. – 31yrs.

e. Education: Degree(s)/Year/Specialization Stevens Institute of Technology Hoboken, NJ BE/1974/Electrical and Computer Application

e. Education: Degree(s)/Year/Specialization: Associates Degree in Engineering Technology, OSU, Civil, Architectural & Electrical Engineering


f. Active Registration: State/Year first registered/Discipline/Oklahoma License Number None.


Mr. Gevaza, retired from OG&E, has served as Cobb Engineering Company’s lead engineer on the Distribution System Hardening and Distribution Conversion Projects for OG&E and has participated in the development of a proposal for Substation Development and Design for City of Edmond and GRDA. Additionally, has lead the development of a proposal for Smart Grid Deployment for City of Edmond. While with OG&E, he served as Manager for Transmission and Distribution Planning and Operations for most of his years for the Electric Utility of OG&E Energy Corp. He led OG&E development of Smart Grid Technology including smart meters and bi-directional breakers. He also has experience on Substation/System Protection Maintenance Programs and Practices; He served as Chairman of The Southwest Power Pool (SPP) Transmission Working Group. Mr. Gevaza has designed SCADA systems for 3 regional control centers which monitored and controlled devices at 157 substations throughout the state of Oklahoma and Arkansas. During this four-year period, he was also responsible for the day-to-day operations of the transmission and distribution control centers. Mr. Gevaza also has served as a resource for Smart Grid Development through various Electric Power Research Institute (EPRI) committees on Solid State Transformer, Fault Anticipator, and Bi-Directional Breakers. He has been Chairman of DV2010, a consortium of seven utilities for development of Smart Grid Technology.


Mr. Locke serves as a consultant to Cobb Engineering Company’s Power Section, providing engineering design support for OG&E’s System Protection & Control group and Substation Engineering group’s expansion, maintenance and upgrade initiatives. He is proficient in the use of: Microstation, SAP and OG&E’s Deuces program.

Mr. Locke, after 31 years of service, is retired from OG&E where he served in various capacities which included 25 years in Corporate Engineering’s System Protection & Control group, as a Senior Designer. He was a Senior Designer for a brief time in the System Integrity’s Standards group where he updated specifications for large power equipment and integrated and documented their processes. He also worked for 2.5 years as the Electrical System Procurement Coordinator in the OG&E Purchasing Department where his primary duties were purchasing large power equipment, transmission and distribution line equipment and managing vendor alliances for the electrical and communications side of the business.

After retirement, he served as a consultant for OG&E’ Purchasing/Procurement Section for 20 months in this same capacity as prior to retirement.

Mr. Locke, has designed SCADA Protection and Control systems for individual substations at voltages ranging from 4kv through 500kV including breaker-and-a-half and ring-bus applications. He designed and produced the construction drawings and assisted with the installation of the field wiring for the last two internal package generators interconnected from within the OG&E system (HSL 9 & 10).

His current projects include upgrades at 15 OG&E Substation locations.


6. Brief resume of key persons, specialists, and individual consultants employed by sub-consultants anticipated for THIS PROJECT. a. Name and Title: La Fayette W. Williams Jr. Contractor a. Name and Title: Brian E. Glover, P.E. – Construction Division Manager b. Project Assignment:

Power Division Field Inspector

b. Project Assignment: Construction Division Manager-Resident Engineer



d. Years experience: With this firm 1.5 With other firms 33 d. Years experience: With this firm 7 With other firms 19 e. Education: Degree(s)/Year/Specialization

Associate in Electronics BS in math

e. Education: Degree(s)/Year/Specialization BS in Civil Engineering, 1985, University of Missouri, Rolla




Mr. Williams, retired form OG&E. provides field verification inspections for an OG&E system hardening project, TLM.

g. Other experience and qualifications relevant to the proposed project: Mr. Glover is responsible for the coordination and supervision of the Construction Management Division. Staff includes: Three Professional Engineers, one Engineer Intern, five office personnel and eleven field inspectors. He also provides constructability reviews for Quality Assurance/Quality Control on major design projects. He has 11 years of experience working with the Oklahoma Department of Transportation, four of them as a Resident Engineer. As a consultant Mr. Glover has designed, managed and inspected numerous interstate, highway, street and bridge projects. He has managed projects ranging from small county bridges to a $700 million turnpike expansion program. Mr. Glover has devoted his entire career to the planning, design, and construction of transportation, airport, and water resource projects. He has provided both project and program management on numerous high profile interstate highway projects. His technical specialties include traffic engineering, bridge rehabilitation, storm drainage design, contract administration, and program management. Mr. Glover’s clients include the Oklahoma Department of Transportation, Oklahoma Transportation Authority, Central Oklahoma Transportation and Parking Authority (COTPA), City of Edmond, Norman Oklahoma City, Tulsa and Bartlesville.


6. Brief resume of key persons, specialists, and individual consultants employed by sub-consultants anticipated for THIS PROJECT. a. Name and Title: Richard N. Bond, P.E. – Division Manager of Construction

Management a. Name and Title: Joshua B. Black, P.E. – Construction Engineer

b. Project Assignment: Construction Management/Resident Engineer

b. Project Assignment: Construction Project Manager/Resident Engineer




MBA , 2010, Southern Nazarene University BS in Civil Engineering, 1985, University of Oklahoma

e. Education: Degree(s)/Year/Specialization BS in Civil Engineering, 2004, Oklahoma State University MS in Civil Engineering, 2005, Oklahoma State University (Project Management)



Oklahoma, 2009, P.E. 24024

Temporary Traffic Control Certification Attended: ASCE Pavement Rehabilitation Techniques


Mr. Bond serves as the Division Manager (South) of Cobb Engineering Company’s Construction Management Division. He is responsible for project staffing, engineering oversight, materials testing coordination, inspection, and documentation of all projects in the southern area of the state.

He has more than 20 years of experience working for the Oklahoma Department of Transportation. He served as a Project Engineer for the El Reno Residency, Resident Engineer in Buffalo, Field Division VI, Area Maintenance Engineer and Assistant Division Engineer for Construction and Maintenance for Field Division III.

He is supported by a team of more than 12 certified inspectors statewide. On grading, drainage & bridge projects, Mr. Bond has been responsible for engineering oversight, construction inspection, materials sampling and testing, construction survey, contract administration and project management, completing numerous bridge replacement projects in Oklahoma which have included:

Coon Creek / SH-19 , Pontotoc County SH-99/US-377 Four Lane near Ada (Byng By-Pass) SH-27/North Canadian River Bridge, Okfuskee County I-35 Pavement Rehabilitation, Garvin County

g. Other experience and qualifications relevant to the proposed project: Mr. Black serves Cobb Engineering Company as the Resident Engineer for various types of construction projects. His responsibilities include coordination and engineering oversight per client standards. His clients include Oklahoma Department of Transportation, Oklahoma Transportation Authority, municipalities, counties and other public entities. He is experienced with all aspects of construction management and inspection. He has had a role in every aspect of a construction project, including project inspector, auditor and resident engineer. His graduate level education focused on construction estimating and equipment management with an emphasis on project management and project scheduling. Mr. Black’s has also worked with consulting engineers, in structural engineering, and the U.S. Army Corps of Engineers, Fort Sill Resident Office, where he applied engineering concepts to resolve contract disputes between the government and the contractor. He solved unexpected problems that arose in the field, provided quality assurance and contract compliance, and developed recovery plans on an assortment of projects. This allowed the contractor to eliminate delays and to comply with the project schedule. Projects representative of his experience include:

Belle Isle Bridge Rehabilitation, I-44 & Ramps over SH-3A & Belle Isle Blvd. ODOT, SBR-ISSN(634)SB Oklahoma County J/P 24883(04) $648,245 Grade, Drain, Surface, and Bridge Post Road from SE 15th Street, Extend N. in Midwest City. STP-STIM(517) Oklahoma County J/P 21978(04) $3,206,824


6. Brief resume of key persons, specialists, and individual consultants employed by sub-consultants anticipated for THIS PROJECT. a. Name and Title: Steve Breshears – Construction Inspector a. Name and Title: Scott Claxton – Lab Technician b. Project Assignment:

Construction Inspector - Tulsa

b. Project Assignment: CM Lab Technician






f. Active Registration: State/Year first registered/Discipline/Oklahoma License Number ACI Certification ODOT Certified In:

Soils Materials Sampling Aggregates

144 hours of National Highway Institute Training. Oklahoma Certificate of Authority (if any) 32 Oklahoma Certificate of Authority (if any) 32 g. Other experience and qualifications relevant to the proposed project:

Mr. Breshears is responsible for providing inspection services on transportation and utility projects for municipal clients as well as the Tulsa International Airport. Prior to joining Cobb Engineering, he was involved in commercial and residential concrete construction and installation of fiber optic lines. He is Oklahoma Department of Transportation (ODOT) certified for Inspection and Materials. Representative of Mr. Brashears’ experience are the following projects:

24-Inch Waterline Loop, East 31st Street, Phase 5, Tulsa Metropolitan Utility Authority: Two miles of 12-inch water main along Admiral Place from 225th East Avenue to 257th East Avenue. He served as project representative inspecting the work full time, preparing daily and weekly reports to the TMUA staff, participating in project meetings, and preparing Record Drawings. 24-Inch Waterline Loop, East 31st Street, Phase 6, Tulsa Metropolitan Utility Authority: Three miles of 24-inch water main along 257th East Avenue from 31st Street South to Admiral Place. He served as project representative inspecting the work full time, preparing daily and weekly reports to the TMUA staff , participating in project meetings, and preparing Record Drawings. Airport Hanger Aprons, Enid, Oklahoma: Existing asphalt apron was removed and replaced with new concrete paving. Project also included storm drainage rehabilitation. He was co-resident inspector observing the work and preparing daily and weekly reports. Runway Extension, Thomas, Oklahoma: Extension of existing runway, including new runway lighting. Resident inspector observing the work and preparing daily and weekly reports.

g. Other experience and qualifications relevant to the proposed project: Mr. Claxton has 2 years experience in construction materials testing, and has tested materials for a variety of clients and projects. He has served private commercial clients as well a public clients such as the Oklahoma Department of Transportation, the Oklahoma Transportation Authority, and the US Army Corps of Engineers, for projects at Tinker Air Force Base. He is experienced with the following tests:

Sand Cone Nuclear Density Fresh Concrete Tests Concrete Compressive Tests Concrete Flexural Beam Tests Proctor Soil Classification Profilograph Pier Inspections Aggregate Gradations

Representative of Mr. Claxton’s experience are the following projects: Robinson Street. Cleveland Co. Norman, OK, ODOT Project TCSP-OH68(007) Salt and Bruno Creek Seminole Co., OK, ODOT Project BRFY 67C(210)HP Rock Creek Rd. Cleveland Co., OK, ODOT Project STP-114B(143)AG Airport Improvements, Thomas, OK


6. Brief resume of key persons, specialists, and individual consultants employed by sub-consultants anticipated for THIS PROJECT. a. Name and Title: Jim Corzette – Project Manager a. Name and Title: Zoey Culpepper - Secretary b. Project Assignment:

Project Management / Construction Inspection

b. Project Assignment: Clerical Support/Receptionist/Front Desk Reception/Construction Management Support




BS/BA, 1988, Columbia College MA Management, 1990, Webster University





Mr. Corzette has served the construction industry for more than 30 years, and has provided quality inspection and observation services for Cobb Engineering Company the last nine years. Some projects representative of his experience include:

Kickapoo Street and McArthur Street Intersection Upgrade, Shawnee, Oklahoma: Project consisted of widening, resurfacing, and traffic signals upgrade on this arterial street intersection. The project included extensive relocation of water and sewer lines. CEC provided design as well a detailed construction management services for this project.. Bartlesville Municipal Airport, Bartlesville, Oklahoma – AIP-3-40-007-004-2003: Phase I – Improve Runway 17 Safety Area. Construction Cost, $1,666,700.. Phase II – Complete Runway Safety Area, Construction of 850 feet of concrete drainage structure. Construction cost, $2,669,100.. US 62 Highway, STPY-026B(232), Grady County, Division 7, Oklahoma Department of Transportation: New centerline lane construction from Blanchard to Middleburg. Construction cost, $9,777,000. R. L. Jones Jr. Airport, Jenks Oklahoma – AIP 3-40-0098-023-2010: Rehabilitation Of Taxiway Zulu And Various Taxilanes Construction Cost 1,456,300. Soundwall USH 169 And Creek Turnpike Tulsa Oklahoma Construction Cost, $3,536,000. Capitol Complex Phases II & III, South Capitol Plaza, Oklahoma City: Construction to make all sidewalks within the Capital Complex comply with current ADA standards, including wheel chair ramps, and reconstruction of south Capitol entrance steps. The project included relocation and modifications to existing water, sewer, stormwater and irrigation systems. Construction cost, $2,300,000.

g. Other experience and qualifications relevant to the proposed project: Mrs. Culpepper is responsible for the reception of a multi-line phone system, walk-in guest, outgoing correspondence, disbursement of incoming mail, faxes and carrier documents, and providing administrative support for Cobb Engineering Company. She updates the company Wiki page as well. Mrs. Culpepper, more specifically, provides administrative support for the Construction Management Division in our Tulsa office. Her responsibilities include, auditing contractor payrolls, ticket audits, entering data into Sitemanager, correspondence for ongoing jobs, and putting together reports for the CEC Tulsa lab.


6. Brief resume of key persons, specialists, and individual consultants employed by sub-consultants anticipated for THIS PROJECT. a. Name and Title: Justin Green – Inspector a. Name and Title: Charles Hinkle – Inspector b. Project Assignment:

Project Inspector

b. Project Assignment: Project Inspector




e. Education: Degree(s)/Year/Specialization High school degree with 2 years at Seminole State College




ODOT Sampling and Testing School Mr. Green is responsible for the construction inspection for various highway and bridge construction projects for Cobb Engineering Company. His experience includes all phases of construction, including earthwork, paving, bridge and miscellaneous construction activities. He is currently the field inspector for a $7 million state highway re-alignment and bridge project.

g. Other experience and qualifications relevant to the proposed project: Mr. Hinkle is responsible for the construction inspection for an assortment of highway and bridge construction projects for Cobb Engineering Company. He is experienced in all phases of construction, including earthwork, paving, bridge and miscellaneous construction. He is currently the field inspector and Materials tester for an I35 Cable Barrier Project. He has recently finished the final phase of a city street in Norman Ok, and has over seen bridge construction for Pottawatomie Co. from beginning to end. His other representative project experience include:

Rock Creek Road Cleveland County,OK, ODOT: Level III full resident engineering services including oversight, construction inspection, materials sampling and testing, construction survey, contract administration, and project management. Bridge and Approaches, Pottawatomie County, OK, ODOT: County Rd, 0.5 miles North and 2.9 miles East of St. Louis. I-35 Cable Barrier McClain County, OK, ODOT: Level III services for 4.68 miles of Safety Improvement (Cable Barrier), on I-35 from 0.25 miles South of the Garvin County Line extending North


6. Brief resume of key persons, specialists, and individual consultants employed by sub-consultants anticipated for THIS PROJECT. a. Name and Title: Joe Hooper - Inspector a. Name and Title: Harold Hopkins – Construction Inspector b. Project Assignment:

Construction Management, Inspection and Materials Testing

b. Project Assignment: Construction Inspector/Survey Technician




Business Administration, 1978, South Oklahoma City Junior College Nuclear Density Gauge Safety Training, 1989 NICET Certified Level II Soils, Asphalt, Concrete Certification No. 097234 RIEI Quality Assurance, Entry Level Certified Concrete Technician, Grade I, ACI OSHA Construction Safety & Health ODOT Sampling and Testing School #2205 Confined Spaces Entry Training School Protective Coatings School





Mr. Hooper is responsible for inspection and construction management services on transportation projects for a variety of clients, including Oklahoma Transportation Authority, City of Norman, City of Durant, and Oklahoma State University. He has eleven years of experience involving field sampling, testing and inspection, performing laboratory testing of soils, aggregate, and concrete. Mr. Hooper is currently inspecting road & bridge projects for the Oklahoma Department of Transportation where he is responsible for all field operations. Representative of Mr. Hooper’s experience are the following projects:

Division III, Oklahoma Department of Transportation: Telephone Road Cleveland County, widen, resurface and install drainage structures. Oklahoma Transportation Authority: Bridge over Black Bear Creek Cimarron Turnpike rehab (10) span bridge, Cimarron Turnpike (7) miles of cols milling and overlay of divided roadway with rumble strip and striping. Division III Oklahoma Department of Transportation: 36th & Main Street Norman Ok. Cleveland County, Widen intersection, Signals, stabilization, asphalt and concrete. Bridge over I-35 at S.19th Street Moore Okla. Cleveland County, Rehab bridge, and add turn lane with signals. Rock Creek Road Norman Okla. Cleveland County, Widen 1.25 miles of roadway with intersection, signals, concrete, sod, striping. Division IV Oklahoma Department of Transportation: Post Road, STP-STIM(517)AG Oklahoma County, Grading, Drainage, Surfacing, Bridge & Erosion Control.

g. Other experience and qualifications relevant to the proposed project: Mr. Hopkins is responsible for the construction inspection for an assortment of highway and bridge construction projects for Cobb Engineering Company. He is experienced in all phases of construction, including earthwork, paving, bridge and miscellaneous construction. Representative of Mr. Hopkins’’s experience are the following projects:

I-40/Arkansas River Bridge Reconstruction in Webbers Falls, OK: I-35 Highway through Ardmore, OK: Galleria Parking Garage, Oklahoma City, OK


6. Brief resume of key persons, specialists, and individual consultants employed by sub-consultants anticipated for THIS PROJECT. a. Name and Title: Scott W. Hunt - Inspector a. Name and Title: Jeff Nielsen – Construction Management Administrative Assistant

b. Project Assignment: Construction Inspector - Tulsa

b. Project Assignment:



d. Years experience: With this firm 3 With other firms 1.5 d. Years experience: With this firm 1 With other firms e. Education: Degree(s)/Year/Specialization

e. Education: Degree(s)/Year/Specialization Bachelor of Science, Business Administration – Oklahoma State University




Mr. Hunt is an experienced field engineering technician who has performed quality control and quality assurance through various types of testing to verify that heavy construction projects are completed in accordance with specifications. Various tests have been performed on concrete and soil specimens. In addition, he has conducted special inspections on structural construction that included post tension cables and steel reinforcing. His experience includes inspection of stadiums, parking decks, airport paving, storm drainage systems, pavement rehabilitation, and multiple story building structures. He is certified as follows:

American Concrete Institute (ACI): Concrete Field Testing Troxler: Hazmat Certification (To transport nuclear gages)

Mr. Hunt’s representative experience includes 24-Inch Waterline Loop, East 31st Street, Phase 6, Tulsa Metropolitan Utility Authority: Two miles of 12-inch water main along Admiral Place from 225th East Avenue to 257th East Avenue. He served as backup project representative when the regular inspector was unavailable. Airport Hanger Aprons, Enid, Oklahoma: Existing asphalt apron was removed and replaced with new concrete paving. Project also included storm drainage rehabilitation. He was co-resident inspector observing the work and preparing daily and weekly reports. Taxiway Rehabilitation, Bartlesville, Oklahoma: Existing taxiway was milled and a 5-inch asphalt overlay placed. Project also included new lighting. Resident inspector observing the work and preparing daily and weekly reports. Apron, Altus, Oklahoma: Construction of a new concrete apron and rehabilitation of drainage system. Resident inspector observing the work and preparing daily and weekly reports.

g. Other experience and qualifications relevant to the proposed project: Mr. Nielsen assists the construction management division with maintaining documentation and records on active projects. He is responsible for coordinating and scheduling meetings for upcoming and current projects. Mr. Nielsen is also responsible for filing and maintaining fleet documentation and updating information on the Cobb database.


6. Brief resume of key persons, specialists, and individual consultants employed by sub-consultants anticipated for THIS PROJECT. a. Name and Title: Jeriah Orth, Lab Technician a. Name and Title: Tony D. Palmer – Construction Inspector b. Project Assignment:

CM Lab Technician

b. Project Assignment: Construction Inspection



d. Years experience: With this firm 2 With other firms d. Years experience: With this firm 10 With other firms

e. Education: Degree(s)/Year/Specialization ODOT Soils Certified ODOT Aggregates Certified ODOT Materials Sampler Certified

e. Education: Degree(s)/Year/Specialization Assoc. in Applied Science, Construction Technology, 2001 Oklahoma State University – OKC United States Army 1985 to 1991 Combat Infantry Badge 101 Airborne ODOT Sampling and Testing School, 2007

f. Active Registration: State/Year first registered/Discipline/Oklahoma License Number f. Active Registration: State/Year first registered/Discipline/ Oklahoma License Number

Oklahoma Certificate of Authority (if any) ODOT Certification # 3181 Oklahoma Certificate of Authority (if any) 32 g. Other experience and qualifications relevant to the proposed project:

Mr. Orth serves as a technician in the Cobb Engineering Company Materials Testing Laboratory. . He assists in performing tess on soils, aggregates and concrete specimen. These tests include the following:

Concrete Compressive Tests Proctor Soil Classification Aggregate Gradations California Bearing Ratio Soluble Sulfate Testing Soil PH Testing

g. Other experience and qualifications relevant to the proposed project: Mr. Palmer is responsible for the construction inspection for an assortment of highway and bridge construction projects for Cobb Engineering Company. He is experienced in all phases of construction, including earthwork, paving, bridge and miscellaneous construction. In addition to Mr. Palmer’s field expertise he has extensive experience in auditing and paper work and is a key element in the finalization process of many of Cobb’s ODOT projects. He is currently responsible for the inspection of Post Rd. Oklahoma Co. STP-STIM(517) Representative of Mr. Palmer’s’s experience are the following projects:

Belle Isle Bridge Rehabilitation, Oklahoma Co., OK, ODOT Project SBR-155N(634)SB

I-35 Dowel-bar Retrofit & Diamond Grinding, Oklahoma Co., OK, ODOT Project IM-STIM(177)000 3R

US-62 Bridge McClain Co. Newcastle, OK, ODOT Project STP-STIM(423)AG


6. Brief resume of key persons, specialists, and individual consultants employed by sub-consultants anticipated for THIS PROJECT. a. Name and Title: John Riggs – Lab Manager a. Name and Title: Darren Sikes – CM Lab Technician b. Project Assignment:

OKC CM Lab Manager




d. Years experience: With this firm 3 With other firms 13 d. Years experience: With this firm 1 With other firms ? e. Education: Degree(s)/Year/Specialization

ODOT Materials Sampling Certification ACI Grade I Certification PTI Level II Certification ODOT Aggregates Certification ODOT Soils Certification

e. Education: Degree(s)/Year/Specialization ODOT Soils Apprentice ODOT Aggregates Apprentice ODOT Material Sampler Apprentice



Oklahoma Certificate of Authority (if any) Certification # 2311 Oklahoma Certificate of Authority (if any) g. Other experience and qualifications relevant to the proposed project:

Mr. Riggs has over 16 years experience in construction materials testing. He has tested materials for a variety of clients and projects ranging from private commercial to ODOT and OTA to USACE projects at Tinker Air Force Base. Mr. Riggs is currently responsible for verifying and certifying CEC’s materials sampling and testing records for all of our projects. He is supervising four employee and is coordinating with all of our inspectors. He is experienced with the following tests:

Sand Cone Nuclear Density Fresh Concrete Tests Concrete Compressive Tests Concrete Flexural Beam Tests Proctor Soil Classification Profilograph Pier Inspections Aggregate Gradations California Bearing Ratios

Representative of Mr. Riggs”’s experience are the following projects: Redbud Power Plant (Luther Ok) Oklahoma National Weather Center (Norman OK) Rock Creek Rd. Widening. ODOT Project STP-114B(143)AG

g. Other experience and qualifications relevant to the proposed project: Mr. Sikes serves as a technician in the Cobb Engineering Company Materials Testing Laboratory. He assists in performing test on soils, aggregates and concrete specimen. These test include the following:

Concrete Compressive Tests Proctor Soil Classification Aggregate Gradations


6. Brief resume of key persons, specialists, and individual consultants employed by sub-consultants anticipated for THIS PROJECT. a. Name and Title: Bill Bethel – Lab Manager a. Name and Title: Christopher A. Smith - Inspector b. Project Assignment:

Tulsa CM Lab Manager

b. Project Assignment: Construction Inspector/Survey Technician




Bachelors Degree in Business Associates Degree in Electrical Mechanical Technology ODOT Materials Sampling Certification ACI Grade I Certification ODOT Aggregates Certification Troxler Safety Certified ODOT Asphalt Certification PTI level one inpection

e. Education: Degree(s)/Year/Specialization EMT Certification 1999,Oklahoma City Community College ODOT Materials Sampling and Testing, 2001 Temporary Traffic Control Certification, 2001 FHAA Bridge Construction Inspection Certification 2007 Asphalt Construction Inspection Certification 2011 Earthwork Construction Inspection Certification 2011


f. Active Registration: State/Year first registered/Discipline/ Oklahoma License Number Highway Construction Materials Technician #2483


Mr. Bethel performs lab testing for quality assurance out of the Tulsa lab. His clients have included OTA, ODOT, FAA, the U.S. Army Corps of Engineering, municipalities and commercial developers. His OTA projects have been on the Cimarron Turnpike, Will Rogers Turnpike and Indian Nations Turnpike. ODOT projects include Highway 169, Interstate 44, Highway 75 in the Tulsa Area, Corp of Engineer projects include Mcallister Army Ammo Depot, and Lake Tenkiller Dam.FAA projects include Tulsa International Airport, Bartlesville Airport ,and Pogue Airport. Mr. Bethel coordinates with inspectors to ensure sampling and testing is in accordance with governing criteria. He is certified on Troxler nuclear gauge. He is ODOT certified Materials Sampler, Aggregates, Asphalt, Soils, and Asphalt Mix Design (Level I and Level II).


Mr. Smith is responsible for the construction inspection for an assortment of highway and signalization construction projects for Cobb Engineering Company, where he also mentors less experienced staff. He is experienced in all phases of construction, including earthwork, paving, bridge and miscellaneous construction. Mr. Smith is currently responsible for the inspection of a $6.6 million project for ODOT SH-39 and Bridge McClain County. STPY 144C(121)

Representative of Mr. Smith’s experience are the following projects:

I-35 Pavement Rehabilitation, Pauls Valley, OK, ODOT, 6.57 miles $27 million.

Main Street Roundabout, City of Norman, OK, $3.2 million

I-40/Arkansas River Bridge Reconstruction, Webbers Falls, OK, ODOT: Replace-ment of bridge spans knocked out by a barge in 2001. I-35 Pavement Rehabilitation Ardmore, OK, ODOT: 8 bridge overlays, $11 Million Galleria Parking Garage Downtown, City of Oklahoma City: Rehabilitation of joints and structural concrete


6. Brief resume of key persons, specialists, and individual consultants employed by sub-consultants anticipated for THIS PROJECT. a. Name and Title: Terry Swayze, Resident Construction Manager a. Name and Title: Jason Tauer Inspector/Lab Technician b. Project Assignment:

Construction Management/Inspection Services

b. Project Assignment: Construction Management/Inspection Services


c. Name of Firm with which associated: Cobb Engineering Company

d. Years experience: With this firm 1 With other firms 28 d. Years experience: With this firm .75 With other firms 5 e. Education: Degree(s)/Year/Specialization


f. Active Registration: State/Year first registered/Discipline/ Oklahoma License Number Certified Public Manager, 2008

f. Active Registration: State/Year first registered/Discipline/Oklahoma License Number Oklahoma Certificate of Authority (if any) 32

Oklahoma Certificate of Authority (if any) Other experience and qualifications relevant to the proposed project: ODOT Materials Sampling Certification ACI Grade 1 Certification PTI Level 1 Certification

g. Other experience and qualifications relevant to the proposed project: Mr. Swayze, with 28 years experience working with the Oklahoma Department of Transportation, is responsible for coordination and supervision of one office person, seven field inspectors, and two lab personnel. He has managed a variety of projects, from county bridge rehabilitation/replacement highway reconstruction projects costing up to $12 million. In addition Mr. Swayze was a member of the Residency that repaired the Webbers Falls Bridge. Mr. Swayze’s project experience includes:

Yale Avenue (Admiral Place to Pine Street) STP-STIM(282)IG Tulsa County J/P 26701(04) Soundwalls Safety Improvements US-169 (between Memorial Drive and Mingo Rd) SAP-172N(293) Tulsa County J/P 22508(05) . E. 131st Street Improvements City of Bixby STP-STIM(263)IG Intersection of 131st Street & Memorial Tulsa County 26683(04) Grading, Drainage, Erosion Control and Surfacing Repairs on Moonshine Road, 2.2 Mile North of US-64 at EW-101.5 & NS-446.1 ERSTP-168C(201)ER Sequoyah County J/P 26591(05)

g. Mr. Tauer has over 5 years experience in Construction Materials Testing and has tested materials for a variety of clients and projects ranging from private commercial to ODOT to projects at Tinker Air Force Base. Mr. Tauer is experienced with the following tests:

Sand Cone Nuclear Density Fresh Concrete Test Concrete Compressive Test Concrete Flexural Beam Test Pier Inspections Procter Soil Classifications Aggregate Gradations

Representative of Mr. Tauer’s experience are the following projects

Clinton Regional Airport : Installing Runway lights and Taxiway Signs Thomas Airport: Install 2 PAPI systems OSU Parking Lot #74 Hobby Lobby Warehouse #5: Pier Inspection, Soil Densities, Concrete Cylinders OU Stadium Expansion OU Utility Plant # 4: Pier Inspection, Soil Densities, Concrete Cylinders I-44 Dowel Bar installation Cleveland County Justice Center: Pier Inspection, Soil Densities, Concrete Cylinders OKC Zoo, Asia Exhibit: Pier Inspection, Soil Densities, Concrete Cylinders


6. Brief resume of key persons, specialists, and individual consultants employed by sub-consultants anticipated for THIS PROJECT. a. Name and Title: Delbert Carman, P.E. – Auditor a. Name and Title: Ronda Jack, CAD Technician b. Project Assignment:

Auditor/Sub-Consultant

b. Project Assignment: Drafting



d. Years experience: With this firm 11 With other firms 43 d. Years experience: With this firm >1 With other firms 1 e. Education: Degree(s)/Year/Specialization


e. Education: Degree(s)/Year/Specialization 2 year CAD Certification, 2009, Mid-America Technology Center

f. Active Registration: State/Year first registered/Discipline/ Oklahoma License Number Oklahoma, 1961, P.E. 6214



Mr. Carman, retired from the Oklahoma Department of Transportation, where he served as Construction Engineer and Chief Engineer, is responsible for compiling final records on construction projects and reviewing for accuracy and completeness. He ensures that the project audit is complete in accordance with municipal, Oklahoma Department of Transportation, and/or Oklahoma Transportation Authority guidelines. He also assists, when needed on dam inspections, bridge inspections and various structural design support services. Some projects representative of his experience include:

g. Other experience and qualifications relevant to the proposed project: Ms. Jack is responsible for the drafting of site design, municipal, and land development drawings for Cobb Engineering Company projects which include private, city, county, state and federal clients. She is proficient in the use of AutoCAD up to Versions 2011. Her representative project experience includes: Municipal Experience: Chickasha Traffic Modeling Exhibit ODOT Experience: Subdivisions Commercial Sandridge Parking Lot Film Row Parking Lot


6. Brief resume of key persons, specialists, and individual consultants employed by sub-consultants anticipated for THIS PROJECT. a. Name and Title: Kenneth Prater – Inspector a. Name and Title: Doug Glenn, P.E., CFM – Branch Manager, Tulsa b. Project Assignment:

Construction Inspection

b. Project Assignment: Project Management and Engineering Design



d. Years experience: With this firm .5 With other firms 36 d. Years experience: With this firm 7 With other firms 1 e. Education: Degree(s)/Year/Specialization




f. Active Registration: State/Year first registered/Discipline/Oklahoma License Number Oklahoma, 2007, P.E., 23070 Certified Flood Plain Manager, 2006, OK-06-00009


Mr. Fletcher is retired from the Oklahoma Department of Transportation, where he was Assistant Resident at Muskogee Division I (July 2006-December 2010). He supervised Inspectors, conducted final inspections, attended plan-in-hand meetings, checked plans, etc. He also has various experience in overlays, new asphalt pavement projects, utility relocations and rail road crossing projects. Specific project experience includes:

US-69 and Peak Boulevard – Muskogee Co. 2, 4-lane Bridges 2 Miles of 4-Lane CRCP

Coweta, Rail Road Bridge Signal Lights 5-Lane Concrete Pavement

I-40 from McIntosh Co. line to the east approximately 10 miles 4-Lane Reconstruction

South Canadian Bridge, US-69 Widening & Rehabilitation 4-Lane

Highway 51 Navigation Bridges in Wagner Co.

g. Other experience and qualifications relevant to the proposed project: Mr. Glenn serves as both the Tulsa Branch Manager and as a Project Manager. His representative experience as design engineer includes:

Southwest Boulevard Rehabilitation, Tulsa, OK.

Hunter’s Pointe Unsewered Area, Tulsa, OK.

Water System Model, Oklahoma State University.

Athletic Training Facility - NE Oklahoma A&M College, Miami, OK.

101st Street and Yale Avenue Intersection, Tulsa, OK.

Inter-dispersal Loop, South Leg, Tulsa, Ok.


6. Brief resume of key persons, specialists, and individual consultants employed by sub-consultants anticipated for THIS PROJECT. a. Name and Title: Jeremy Colibert – Production Team Leader a. Name and Title: Lynda Crowley – Tulsa Secretary/Receptionist b. Project Assignment:

CAD Technician/Draftsman - Tulsa

b. Project Assignment: Clerical Support/Receptionist/Front Desk Reception


c. Name of firm with which associated: Cobb Engineering Company – Tulsa Office

d. Years experience: With this firm 5 With other firms d. Years experience: With this firm 4 ½ months With other firms 39 yrs e. Education: Degree(s)/Year/Specialization

e. Education: Degree(s)/Year/Specialization High School graduate. Many years of on-the-job training.




Mr. Colibert serves as a design technician responsible for the support of the Tulsa branch office primarily specializing in municipal and ODOT projects. Mr. Colibert is proficient in the use of AutoCAD Map 3d 2005-2009, Civil 3D 2011, Autodesk Architectural Desktop, Autodesk 3d Studio Max, Eagle Point, Inroads XM-V8i, Microstation V7-V8i, Arc Fm “GIS Software,” Adobe Suite – Photo Editing, Video and Editable PDF creation, and Google Earth Pro. Some of his recent projects have included:

2009 Waterline Improvements, Stillwater, OK I-44 & Lynn Lane Interchange, Tulsa, ok SH-66, Creek County US-60, Craig County Turner Turnpike Rehabilitation, Tulsa, OK Maintenance Zone 9043, Tulsa, OK Southwest Boulevard Rehabilitation, Tulsa, OK R.L. Jones Airport Taxilanes, Jenks, OK Aspen & Creek Turnpike Interchange, Broken Arrow, OK Tuxedo Avenue, Bartlesville, OK 71st Street Rehabilitation, Tulsa, OK 101st and Yale Intersection, Tulsa, OK

g. Other experience and qualifications relevant to the proposed project: Mrs. Crowley is responsible for the reception of a multi-line phone system, walk-in guest, outgoing correspondence, disbursement of incoming mail, faxes, carrier documents, and providing administrative support for Tulsa and Oklahoma City projects at Cobb Engineering Company. Mrs. Crowley provides administrative support for the Airport Planning and Design. She establishes and maintains current project files as well as archived files. Her experience consist of many years working on multi tasks projects many of which were deadline oriented, AP/AR accounts using Soloman accounting software, marketing design of company brochures, travel arrangements, maintaining year-to-date sales revenues, typing purchase orders, running company reports for accounting and purchasing departments, designing office forms and any administrative support required.


6. Brief resume of key persons, specialists, and individual consultants employed by sub-consultants anticipated for THIS PROJECT. a. Name and Title: Eric Oldham – Survey Technician a. Name and Title: Stephen King, PE. – Project Engineer b. Project Assignment:

Production Support

b. Project Assignment: Site/Roadway Project Management and Engineering Design



d. Years experience: With this firm >1 With other firms d. Years experience: With this firm 0.5 With other firms 6 e. Education: Degree(s)/Year/Specialization

e. Education: Degree(s)/Year/Specialization BS in Civil Engineering, 2004 Mississippi State University


f. Active Registration: State/Year first registered/Discipline/Oklahoma License Number Oklahoma, 2008, PE No. 23717 Certified Professional in Erosion and Sediment Control (CPESC No. 4090), 2007


Mr. Oldham serves as a Survey Technician and is responsible for support of the Survey Party Chief to complete projects for several clients including the following:


College and Mustang Public Schools Mr. Oldham is also responsible for field preparation and post-processing as well as the field work for a variety of surveys including:



Mr. King serves as project engineer in civil engineering and site design at Cobb Engineering Company’s Tulsa Office. He is responsible for project design of urban and rural highways, city streets, parking lots, and site civil design. His responsibilities include hydraulic and drainage analysis, utility layout and design, estimating quantities, and project coordination. Current clients include the City of Tulsa, Corgan Associates, and the City of Enid. His representative experience includes:

36th Street. North, Harvard Avenue to Yale Avenue, Tulsa, OK. Project Engineer for the design and production of engineering plans for this arterial street rehabilitation.

BlueCross BlueShield Regional Headquarters Renovation, Tulsa, OK. Project Engineer responsible for civil site design, plan production, specifications, and construction administration for improvements on a 2.68-acre commercial site. Design responsibilities included storm sewer, paving design, erosion control, and utilities. Responsible for replatting and vacation of public way.

Enid Woodring Regional Airport Drainage Study, Enid, OK. Modeled and analyzed the storm sewer system for Woodring Airport, and provided report with analysis and recommendations on improving the overall efficiency of the system.


6. Brief resume of key persons, specialists, and individual consultants employed by sub-consultants anticipated for THIS PROJECT. a. Name and Title: Bill Petree, CAD Technician a. Name and Title: Steve Sharples, – Senior Design Technician b. Project Assignment:

Survey Technician, Drafting Support

b. Project Assignment: Design Technician / CAD Production - Tulsa




e. Education: Degree(s)/Year/Specialization BS in Industrial Technology, 1988, Northeastern State University Associate Science Degree, Engineering and Surveying, 1982, Tulsa Junior College Associate Science Degree, Applied Sciences, 1976, Tulsa Junior College Drafting, 1968, Tulsa Vo-Tech School


f. Active Registration: State/Year first registered/Discipline/ Oklahoma License Number Certified Flood Plain Manager, 2000, Now Lapsed


Mr. Petree serves as a Survey Technician and is responsible for support of the Survey Crew to complete projects for a variety of clients such as


College and Mustang Public Schools Mr. Petree is also responsible for field preparation and post-processing as well as the field work for a variety of surveys including:



Mr. Sharples has 43 years experience in public works design and production. His experience with other firms and municipalities includes wastewater treatment plants, water storage and distribution, stormwater, roadways and commercial site development. He currently serves as a Team Leader in the Tulsa office for civil design projects covering transportation, water, wastewater, and site development. Projects representative of his experience include:

24-Inch East Waterline Loop, East 31st Street, Tulsa, OK, Design of water main loop around the Fair Oaks area consisting of 7 miles of 24-inch and 2 miles of 12-Inch water main. Hunter’s Pointe Unsewered Area Tulsa, OK, Design development for construction of approximately 10,100 linear feet of gravity sewer serving the Hunter’s Pointe Addition. Two-inch Water Main Replacements, Tulsa, OK. Design of 6-inch water mains to replace over 10,000 feet of existing 2-inch water line in an older residential area of north central Tulsa. Southwest Boulevard Rehabilitation, Tulsa, OK, Project to rehabilitate concrete pavement, replacement of 12-inch water line and rehabilitation of sanitary sewer lines on approximately 4,200 lineal feet of Southwest Boulevard, from 23rd Street to the Arkansas River Bridge. 101st Street and Yale Avenue Intersection, Tulsa, OK, Project to upgrade this Intersection and Yale Avenue from 101st Street to the Creek Turnpike. The existing two lane roadway was widened to five lanes. Athletic Training Facility - NE Oklahoma A&M College, Civil site design for a new Athletic Training Facility located directly north of the existing football field end zone at Northeastern Oklahoma A&M College in Miami, OK.


6. Brief resume of key persons, specialists, and individual consultants employed by sub-consultants anticipated for THIS PROJECT. a. Name and Title: Travis Smith - CAD Technician a. Name and Title: J. Carthal Cobb, P.E. – Tulsa Quality Control Director b. Project Assignment:

Drafting Production Support

b. Project Assignment: Quality Control




Certification in Computer Aided Drafting: AutoCad , AutoCad Mapping

e. Education: Degree(s)/Year/Specialization BS in Civil Engineering, 1966, University of Arkansas MS in Civil Engineering, 1967, University of Arkansas


f. Active Registration: State/Year first registered/Discipline/Oklahoma License Number Oklahoma, P.E., 8812


Mr. Smith provides drafting support for the Transportation, Municipal, and Airport divisions of Cobb Engineering. His recent project experience includes:

Yale Avenue/36th Street North Interchange, Tulsa, OK

101st Street South /Yale Avenue, Waterline Relocation, Tulsa, OK

Cow Creek Stabilization, Payne County, OK

K Place Widening, Jenks, OK

I-44 / Lynn Lane Interchange, Broken Arrow, OK

Aspen Interchange, Creek Turnpike, Broken Arrow, OK

US 66 & Sand Creek Bridge Replacement, ODOT Division 8, OK

US 60 and Big Cabin Bridge Rehabilitation, Vinita, Oklahoma.

g. Other experience and qualifications relevant to the proposed project: Mr. Cobb, with over 40 years of experience, serves as the Quality Control Manager for all projects in Tulsa and for the company as a whole as needed. His experience includes a wide variety of civil and public works projects in the areas of water, wastewater, stormwater, transportation, aviation, and structures. His representative projects include:

Shawnee Avenue Rehabilitation and Extension, Bartlesville, Oklahoma. Main Street Streetscape Enhancement Project, Owasso, Oklahoma. East Sewer Line Extension, Clinton, Oklahoma. Lexington Lift Station Relief, Tulsa, Oklahoma. Legion Park Lift Station, Blackwell, Oklahoma. 24” East Tulsa Water Line Loop, Tulsa , Oklahoma. Water System Vulnerability Assessments, Oklahoma. 42"/36” Water Main, Hefner WTP to Morgan Road/Britton Road, and Pump Station

Expansion, Oklahoma City, Oklahoma. Project Quality Assurance 42-inch and 36” water main and upgrade of existing

water pump station from 4 to 8 mgd. Constituent Monitoring Stations & Master Meters, Tulsa, Oklahoma. Standard Specifications and Construction Drawings, Norman, Oklahoma. Broken Arrow South Loop Turnpike, Broken Arrow, Oklahoma.


6. Brief resume of key persons, specialists, and individual consultants employed by sub-consultants anticipated for THIS PROJECT. a. Name and Title: Maria L. Wilson – Secretary-Treasurer; Business Manager a. Name and Title: Amber D. Clark – Accounting Assistant b. Project Assignment:

Controller; Administration Division Manager

b. Project Assignment: Accounting Assistant



d. Years experience: With this firm 13 With other firms 14 d. Years experience: With this firm With other firms 3 e. Education: Degree(s)/Year/Specialization

BBA in Management, 1985, Oklahoma Baptist University

e. Education: Degree(s)/Year/Specialization AAS specialized in Business Management, 2010, Oklahoma City Community College




Mrs. Wilson is responsible for the administration of Cobb Engineering Company’s day-to-day operations, including all accounting functions, human resources, purchasing, and supervision of administration and IT. Mrs. Wilson serves as Quality Control in reviewing contract documents, marketing materials, and general correspondence. Mrs. Wilson served as an Analyst for the Federal Reserve Bank of Kansas City – Oklahoma City Branch from 1985 – 1993. Mrs. Wilson served as Executive Assistant to the Operations Manager for AFS, Inc., Oklahoma City from 1980 – 1985.

g. Other experience and qualifications relevant to the proposed project: Ms. Clark is responsible for creating, reviewing, and tracking all invoices sent out to clients as well as other accounts receivable functions. She also regularly updates all financial reports pertaining to the company.


6. Brief resume of key persons, specialists, and individual consultants employed by sub-consultants anticipated for THIS PROJECT. a. Name and Title: Shane Lambert – Information Systems Administrator a. Name and Title: Melissa Meadows-Leyba, Administrative Assistant b. Project Assignment:

IT System Support

b. Project Assignment: Administrative Assistant








Mr. Lambert is CEC’s Information Systems Administrator. He is responsible for the upkeep and maintenance of all technology. Mr. Lambert also assisted in organizing and constructing Cobb’s network infrastructure in their newest building in OKC. He was responsible for migrating Cobb’s Microsoft Exchange email system to a new Exchange server. Mr. Lambert also took the lead in designing and constructing CEC's network topology in the new Duncan office location as well as CEC’s new Tulsa CM Materials Testing Lab. He is experienced with managing Active Directory, Microsoft Exchange, troubleshooting desktop and laptop workstations, Windows 2000, 2003, and 2008 R2 with HyperV servers. Mr. Lambert has also implemented a private cloud environment for CEC consisting of Cybernetic iSCSI storage solutions and desktop and server virtualization. Mr. Lambert is an active member of the Association of Information Technology Professionals.

g. Other experience and qualifications relevant to the proposed project: Mrs. Leyba processes accounts payable transactions, inputs time data for all employees, creates invoices for accounts receivable, and assists with other administrative tasks.


6. Brief resume of key persons, specialists, and individual consultants employed by sub-consultants anticipated for THIS PROJECT. a. Name and Title: Karen D. Nathman – Contract Administrator a. Name and Title: Kelly E. Farmer – Operations Analyst b. Project Assignment:

Contract Administration –project tracking

b. Project Assignment: Operations Analysis, Accounts Receivable




Certified Paralegal – 1981, Paralegal Institute Bachelor of Liberal Arts in Music Education, 1989, University of Texas at Arlington Master of Music Education , 1993, University of Central Oklahoma PhD (ABD) Music Education, 2007, University of Oklahoma

e. Education: Degree(s)/Year/Specialization BS in Mathematics, 2000, Oklahoma State University




Mrs. Nathman has one year of experience providing administration of contracts, documentation, and records management. She has experience on varying levels of documentation with projects including municipal, tribal, county, state, and federal transportation facilities. Mrs. Nathman is responsible for initiating, reviewing, implementing, and tracking all contracts as well as accounting reports.

g. Other experience and qualifications relevant to the proposed project: Mrs. Farmer is responsible for the oversight of contracts and accounts receivable as well as providing analytical reports for the company.


6. Brief resume of key persons, specialists, and individual consultants employed by sub-consultants anticipated for THIS PROJECT. a. Name and Title: Linda Provence – Secretary/Receptionist a. Name and Title: Steve Williams- Information Technology/Information Systems Admin

b. Project Assignment: Clerical Support/Receptionist/Front Desk Reception

b. Project Assignment: IT Systems Support



d. Years experience: With this firm 6 With other firms 27 d. Years experience: With this firm 1 With other firms 12

e. Education: Degree(s)/Year/Specialization One year college business related courses. Various career oriented courses at Francis Tuttle and Kiamichi Vo-Tech, as well as Oklahoma Christian University.

e. Education: Degree(s)/Year/Specialization Associates Degree of Applied Science-Computer Networking and Information Systems 2003 Certificates Degree in: CCNA-Cisco Certification MCSE-Microsoft Certification Systems Engineer A+-Hardware and Software Certification EMT-EMT B Certification CompTIA A+ and Microsoft MCP Certified, Dell DCSE in Printers, Notebooks and Workstations/Servers, Gateway Notebooks and Desktops, Sony Notebooks




Ms. Provence is responsible for the reception of a multi-line phone system, walk-in guest, outgoing correspondence, disbursement of incoming mail, faxes and carrier documents, and providing administrative support for Cobb Engineering Company. Ordering, receiving and stocking of supplies for use by staff. Maintaining a welcoming atmosphere for guest, and fellow employees. Provides updates of the master contact list with new hires and changing company contacts as well. Coordinates facility issues with providers of services Ms. Provence provides administrative support for the Airport Planning and Design Division as well as other divisions of Cobb Engineering. She establishes and maintains project files, contract billing files and payable files. Her experience consist of five years with ODOT, three years as a deputy county clerk, ten years as deputy county treasurer, 14 years in administrative retail, which encompassed payroll, AP/AR inventory control and H/R functions.

g. Other experience and qualifications relevant to the proposed project: Assistant to Shane in the upkeep and maintenance of the network and all attached devices and peripherals. Update software and hardware as needed on all computers and servers as needed. Perform preventative maintenance on all company computer equipment as needed. Troubleshooting software and hardware issues as the arise and solve them within a timely manner. Active member in AITP


6. Brief resume of key persons, specialists, and individual consultants employed by sub-consultants anticipated for THIS PROJECT. a. Name and Title: Steven P. Johnson, P.E. – Business Development Manager a. Name and Title: Ashleigh Dunham – Marketing Coordinator b. Project Assignment:

Project Manager/Project Engineer / Business Development

b. Project Assignment: Marketing



d. Years experience: With this firm 10 With other firms d. Years experience: With this firm 2.5 With other firms e. Education: Degree(s)/Year/Specialization


e. Education: Degree(s)/Year/Specialization BA in Journalism and Broadcasting, 2008, Advertising and Public Relations

f. Active Registration: State/Year first registered/Discipline/ Oklahoma License Number Oklahoma, 2007, P.E., 23071/Texas, 2011, P.E., 107898/Arkansas, 2011, P.E., 14626



Mr. Johnson serves as Business Development Manager of Cobb Engineering Company. He is responsible for the major functions of developing new and existing business in the areas of engineering and construction supervision. His major responsibility is to create vision for continued marketing efforts with existing clients as well as establishing new opportunities for new business with new clients. Mr. Johnson provided project design and coordination of the I-40 Crosstown (West Interchange). Coordination efforts included budgeting, scheduling, value engineering, and administrative efforts involving such entities as the Oklahoma Department of Transportation, the Federal Highway Administration, the City of Oklahoma City, the Project Management Consultant (PMC), the Design Engineering Firms (DEFs), and internal staff. He has provided projects for various municipal clients including Tulsa, Broken Arrow, Owasso, Stillwater and Jenks. These projects include transportation design and studies, utility design, and site design. Mr. Johnson is an active member of the American Society of Civil Engineers and the Society of American Military Engineers.

g. Other experience and qualifications relevant to the proposed project: Ms. Dunham started working for CEC in May 2009. She coordinates with CEC project managers and all current clients, potential clients and sub consultants, concerning upcoming design or management projects. She also prepares the proposals and interview materials CEC uses to acquire new projects. Ms. Dunham also manages and produces the company’s monthly newsletter so all employees’ stay up-to-date with relative news at CEC. She coordinates and plans several events for and at CEC, and serves as a design resource for any marketing need, such as commemorative pieces, sponsorship advertisements and company activities. She also manages the CEC Website and social media accounts. Ms. Dunham is proficient in Adobe Creative Suite: InDesign, Illustrator and Photoshop.


6. Brief resume of key persons, specialists, and individual consultants employed by sub-consultants anticipated for THIS PROJECT. a. Name and Title: Colt Schroder – Survey Technician a. Name and Title: Newbi John, Lab Technician b. Project Assignment:

Production Support




d. Years experience: With this firm >1 With other firms d. Years experience: With this firm 1 With other firms e. Education: Degree(s)/Year/Specialization

e. Education: Degree(s)/Year/Specialization ODOT Soils Certified (Apprentice) ODOT Aggregates Certified (Apprentice) ODOT Materials Sampler Certified (Apprentice) Scheduled to certify in Fall 2012 & Spring 2013



Oklahoma Certificate of Authority (if any) 32 Oklahoma Certificate of Authority (if any) ODOT Certification # 3181 g. Other experience and qualifications relevant to the proposed project:

Mr. Schroder serves as a Survey Technician and is responsible for support of the Survey Party Chief to complete projects for several clients including the following:


College and Mustang Public Schools Mr. Schroder is also responsible for field preparation and post-processing as well as the field work for a variety of surveys including:



Mr. John serves as a technician in the Cobb Engineering Company Materials Testing Laboratory. . He assists in performing tests on soils, aggregates and concrete specimen. These tests include the following:

Concrete Compressive Tests Proctor Soil Classification Aggregate Gradations California Bearing Ratio Soluble Sulfate Testing Soil PH Testing

Resistivity


6. Brief resume of key persons, specialists, and individual consultants employed by sub-consultants anticipated for THIS PROJECT. a. Name and Title: Rance Jones Lab Technician a. Name and Title: Skyler Forth, Lab Technician b. Project Assignment:

b. Project Assignment:

CM Lab Technician



d. Years experience: With this firm .5 With other firms 7 d. Years experience: With this firm >1 With other firms 2.5 e. Education: Degree(s)/Year/Specialization

e. Education: Degree(s)/Year/Specialization ODOT Apprentice A030 ACI Level I (10/23/13) ODOT Material Sampler – aggregates, asphalt, materials sampler, soils Troxler (1/19/13)

f. Active Registration: State/Year first registered/Discipline/Oklahoma License Number Oklahoma Certificate of Authority (if any)


Other experience and qualifications relevant to the proposed project: ODOT Materials Sampling Certification ACI Grade 1 Certification PTI Level 1 Certification

Oklahoma Certificate of Authority (if any) ODOT Certification # 3181

g. Mr. Jones has over 5 years experience in Construction Materials Testing and has tested materials for a variety of clients and projects ranging from private commercial to ODOT to projects at Tinker Air Force Base. Mr. Jones is experienced with the following tests:

Nuclear Density Fresh Concrete Test Concrete Compressive Test Concrete Flexural Beam Test Pier Inspections Proctor Soil Classifications Aggregate Gradations

Representative of Mr. Jones experience are the following projects

Yampa Valley Regional Airport (Craig Co.) Cast & break flexural beams OSU Student Union Expansion: Soil Densities, Concrete Cylinders Hobby Lobby Warehouse #5: Pier Inspection, Soil Densities, Concrete Cylinders OU Student Union: Pier Inspection, Soil Densities, Concrete Cylinders & Rebar OU Utility Plant # 4: Soil Densities, Concrete Cylinders, Masonry testing Chickasaw T.P. & Hwy 177 Ramps: Soil Densities, Concrete Cylinders Cleveland County Justice Center: Pier Inspection, Soil Densities, Concrete Cylinders OG&E OU Sprit Wind (Woodward OK) OKC Zoo, Asia Exhibit: Soil Densities, Concrete Cylinders


Mr. Forth serves as a technician in the Cobb Engineering Company Materials Testing Laboratory. He assists in performing tests on the following: Nuclear Density Fresh Concrete Test Concrete Compressive Test Pier Inspections Proctor Soil Classifications Aggregate Gradations


6. Brief resume of key persons, specialists, and individual consultants employed by sub-consultants anticipated for THIS PROJECT. a. Name and Title Jessie Sullivan – Field Technician a. Name and Title: Shannon Roach – Construction Specialist b. Project Assignment:

Construction Management/Inspection Services

b. Project Assignment: Construction Management



d. Years experience: With this firm >1 With other firms 1.5 d. Years experience: With this firm >1 With other firms 11 e. Education: Degree(s)/Year/Specialization

e. Education: Degree(s)/Year/Specialization Oklahoma State University BS/2001/Environmental Science opt. Natural Resources Minor/2001/Soil Science


f. Active Registration: State/Year first registered/Discipline/Oklahoma License Number ODOT Aggregates Troxler Safety Course ACI Level I ODOT Material Sampler Oklahoma Certificate of Authority (if any) 32

Oklahoma Certificate of Authority (if any) 32 g. Other experience and qualifications relevant to the proposed project:

ODOT Materials Sampler – 12/1/16 ACI Concrete Field Testing Technician – Grade 1 – 7/19/16 .

.

g. Other experience and qualifications relevant to the proposed project: Ms. Roach serves as a construction specialist in the Cobb Engineering Company Materials Testing Laboratory. She is certified in the following: ODOT Aggregates (3/14/13) ODOT Soils (4/26/14) ACI Concrete Strength Testing Technician (3/30/17) Nuclear Density Gauge Safety Training ACI Laboratory Testing Technician – Level 1 (3/30/17) Experience in Lab Tests: Proctor Soil Classification CBR Gradations Soil Unconfined Compression Concrete Flexural Beam Compressive Test Specific Gravity Coarse/Fine Aggregates Organic Impurities Test Project experience includes – OSU Forensics Science Building, OU Schusterman Center


6. Brief resume of key persons, specialists, and individual consultants employed by sub-consultants anticipated for THIS PROJECT. a. Name and Title: Felicia Jackson, P.E. a. Name and Title: Curt Avant PMP CP1 b. Project Assignment:

Transportation Project Manager

b. Project Assignment: CM, GIS & Power



d. Years experience: With this firm With other firms 15 d. Years’ experience: With this firm With other firms 34 e. Education: Degree(s)/Year/Specialization

BS in Civil Engineering, 1994, Prairie View A&M University

e. Education: Degree(s)/Year/Specialization Electrical Technology OCCC


Oklahoma PE No. 22820

f. Active Registration: State/Year first registered/Discipline/ Oklahoma License Number PMP NACE CP1


Mrs. Jackson has more than 15 years of experience in the civil engineering industry. Areas of focus include, transportation design, drainage, utility relocation coordination, and right-of-way plans. She has served as project manager for various state highway, county and city projects. She is experienced in all aspects of transportation design.

g. Other experience and qualifications relevant to the proposed project: During his time at OGE Curt developed a relationship between OGE & Cobb Engineering Company resulting in the following projects as well as others:

Transformer Load Management (TLM) project Underground proactive cable replacement project PCB no-load transformer project System Hardening Tinker Base Privatization Various other capital improvement projects

In his 34 years with OG&E, Curt performed a variety of functions, spending most of his career in distribution design and project management. Upon retirement he was managing a group of project managers and analyst responsible for a very large portfolio of projects. Curt lead this group for the last 5 years of his tenure with OGE. Some of the projects he and his group where responsible for include:

System Hardening Tinker Base Privatization TLM Devon World Headquarters All forced relocations including the I-40 relocation Various system improvement projects in Oklahoma and Western Arkansas

Curt also has experience serving as a resource or lead for OGE on the following:

Development of their GIS system Development of process for providing ETOR to customers in outage situations Reliability Coordinator


6. Brief resume of key persons, specialists, and individual consultants employed by sub-consultants anticipated for THIS PROJECT. a. Name and Title: Austin C. Burton, E.I. – Project Engineer Technician a. Name and Title: Sarah Vickers, Design Technician b. Project Assignment:

Design

b. Project Assignment: Design & Drafting



d. Years experience: With this firm 1 With other firms 0 d. Years experience: With this firm 2 months With other firms 8 e. Education: Degree(s)/Year/Specialization

Bachelors in Civil Engineering / May 2011 / Oklahoma State University

e. Education: Degree(s)/Year/Specialization 2 year CAD Certification, 2004, Mid-America Technology Center

f. Active Registration State/Year first registered/Discipline/ Oklahoma License Number Oklahoma / 2011 / EI / 14688



Mr. Burton serves as project civil engineer technician and assists the project manager with project design, planning, coordination and communication to produce design plans, specifications and estimates. He is skilled in the use of Autodesk’s Civil 3D computer design software. His representative project experience includes:

ODOT Fiber Optic Design, Western Oklahoma. This project provided detailed plans for the construction of fiber optic cable throughout the State. The purposed of these fiber optic lanes was to connect institutions and municipalities in rural Oklahoma to the larger Oklahoma cities for the sake of connectivity and data sharing/storage. CEC operated as the project manager for 6 other firms to complete the project. In addition, CEC had its own segment of the project to design.

PC-0431 N.W. 178th Street Widening, Oklahoma City. This project widens N.W. 178th St. between May Avenue and Pennsylvania Avenue from a 2 lane to a 4 lane road. The preliminary report has been completed and discusses existing traffic, utilities, and right-of-way in relation to the proposed widened road. A preliminary drainage study for the project area was also completed in order to later size inlet hoods and grates to keep water off of the proposed roadway and meet demand during heavy storm events. This project is currently in the utility and right-of-way coordination phase.

Lone Oaks East Traffic Impact Analysis, Oklahoma City, Oklahoma. Oklahoma City has seen significant residential and commercial growth in the northwest portion of the city and expects more in the near future. The purpose of the study was to determine the traffic impact that Lone Oaks East residential development would have on the surrounding area and to offer several conceptual solutions to alleviate the potential traffic congestion.

Mangum Municipal Airport Taxiway Design & Hangar Apron Rehab, Mangum, Oklahoma. This FAA-programmed project aims to improve airport safety and convenience by connecting two hangars with a new parallel taxiway. Also included in this design is the reconstructing of two hangar aprons to better serve airport patrons. This project is set for construction in 2012.

g. Other experience and qualifications relevant to the proposed project: Mrs. Vickers is responsible for the designing and drafting of construction plans for Cobb Engineering Company projects which included private, city, county, state and federal clients. She is proficient in the use of AutoCAD up to Versions 2011 & in AutoCAD Civil 3D 2011. Her representative project experience includes: Design Build Experience: Emerson School CEC Building including utilities Municipal Experience: Oklahoma State University Institute of Technology water and sewer line replacements Britton Road paving and waterline ODOT Experience: Recon-pulling property legals, plotting and detour maps


6. Brief resume of key persons, specialists, and individual consultants employed by sub-consultants anticipated for THIS PROJECT. a. Name and Title: James Hill – Inspector a. Name and Title: Joe Grose – Inspector b. Project Assignment:

CM Inspector b. Project Assignment:

CM Inspector c. Name of Firm with which associated:

Cobb Engineering Company



BS – Engineering Physics/Math Minor


f. Active Registration: State/Year first registered/Discipline/Oklahoma License Number ODOT Materials Sampling #3323 ACI Grade I Certified Certified by the Corp. of Engineers as a Quality Control Manager Oklahoma Certificate of Authority (if any) 32

f. Active Registration: State/Year first registered/Discipline/Oklahoma License Number ODOT Materials Certified in – Soils, Materials Sampling, Asphalt, Concrete and Aggregates Oklahoma Certificate of Authority (if any) 32


Mr. Hill has more than 5 years of experience in construction materials testing & Inspection clients include: Corp. of Engineering, U.S. Air Force, City of Tulsa, city of Muskogee, City of Collinsville, City of Skiatook, Walmart, Creek Nation, Watonga Airport, and Tonkawa Airport. Mr. Hill is experienced in the following tests: Nuclear Density, fresh Concrete Test, concrete compressive test. He maintains experience in overseeing all aspects of quality control and safety. Including documenting daily project progress, inspecting and overseeing formwork, concrete placements, posttensioning and grouting, painting, etc. He also has experience in handling the submittal process of materials and procedures for government approvals.

g. Other experience and qualifications relevant to the proposed project: ODOT Surveyor (5 years) ODOT Inspection of Roadway & Bridges (10 years) Worked in and/or Supervised Various Registered Labs (13 years) ODOT Training Center Instructor/Evaluator (1.5 years) Taught material techs proper testing procedures, evaluated techs to determine if proper procedures were used (soils, materials sampling, aggregates, asphalt, concrete) Carter Burgess (now Jacobs Engineering) (10 years) Established and Managed Testing Lab Major Projects ODOT – 4 Lane US-81 Rush Springs to Marlow Cross-town Reconstruct and Overlay US-62 4-Lane Asphalt & Concrete I-35 Asphalt overlay, mile markers 40 & 48 Various County Bridges & City Streets in Div. 7 & 4 Jacobs – Various City Streets in OKC, Norman and other surrounding cities Testing Manager for various projects including, Si Ver star, Apac, T&G Asphalt I-35 Reconstruction Pauls Valley (south approximately 7 miles)


6. Brief resume of key persons, specialists, and individual consultants employed by sub-consultants anticipated for THIS PROJECT. a. Name and Title: Bill Trott – Lab Technician a. Name and Title: Jackie Reich – Residency Auditor b. Project Assignment:

CM Lab Technician

b. Project Assignment: Construction Management




e. Education: Degree(s)/Year/Specialization ODOT Apprentice A030 ACI Level I (10/23/13) ODOT Material Sampler – aggregates, asphalt, materials sampler, soils Troxler (1/19/13)

f. Active Registration: State/Year first registered/Discipline/Oklahoma License Number ODOT Aggregates Troxler Safety Course ACI Level I ODOT Material Sampler Oklahoma Certificate of Authority (if any) 32


Oklahoma Certificate of Authority (if any) ODOT Certification # 3181

g. Other experience and qualifications relevant to the proposed project: Mr. Trott serves as a technician in the Cobb Engineering Company Materials Testing Laboratory. These tests include the following: Nuclear Density Fresh Concrete Test Compressive Test Concrete Cylinder Concrete Flexural Beam Test Aggregates Gradations Proctor for Soils Project experience includes: OSU Stadium West End Zone I-44 Rehab (Tulsa) I-244 Rehab (Tulsa) Various projects for the City of Tulsa


Mr. Reich as 32 years of experience with ODOT (1980-2012). A list of the several divisions he has been involved during his time at ODOT is below. Survey Crew (2 years) Asphalt Testing Lab (3 years) Highway Inspector (3 years) Residency Auditor (20 years) Office Manager (4 years) Audited projects consisting of county, city and state projects, as well as multi-million dollar interstate projects.


6. Brief resume of key persons, specialists, and individual consultants employed by sub-consultants anticipated for THIS PROJECT. a. Name and Title: Patrick Maehs a. Name and Title: Matthew Overall, LSI – Survey Crew Chief b. Project Assignment:

Project Manager / Design Technician Manager

b. Project Assignment: Survey Crew Chief/Drafting Support/CAD Technician




Associate Degree in Architecture – Oklahoma State University – OKC

e. Education: Degree(s)/Year/Specialization LSI




Mr. Maehs began working in the civil engineering field in 1977. His experience includes a wide variety of projects including: Municipal and rural water distribution system, sanitary sewer collection system, force mains, lift stations, water and sewer treatment facilities, rural and city roadway design, general aviation, subdivision design, private, public & federal land development sites, sports field complexes, streetscape projects, storm sewer systems including underground piping and channelization, storm water management, hazardous waste facilities, green belt / plaza areas, natural gas distribution systems, shopping centers with outparcels site development, university campus wide site, utility, drainage, greenbelt and architectural project coordination, preparation of easements, construction inspection, survey coordination. His project management experience is diverse with both small and large projects with duties including project correspondence & coordination, client care, local, state and federal office coordination, project budgeting, personnel assignment, project due diligence, coordination of project disciplines. Mr. Maehs has been involved in the civil design and project coordination on numerous sites including retail stores and shopping centers, restaurants, educational facilities, hazard waste sites, solid waste transfer facilities, truck stop/travel centers, churches, electrical substations, college campus dormitories, sport complexes, sport field houses and concession areas, campus plaza areas, medical clinics, hospitals and retirement centers. Experience includes design of municipal sanitary sewer systems, water distribution systems, roadways for municipalities in Oklahoma.

g. Other experience and qualifications relevant to the proposed project: Mr. Overall serves as a survey Crew Chief and his primary role is to lead survey field crews on projects for several clients including the following:




Mr. Overall also assists in generating proposals and fee estimates.


6. Brief resume of key persons, specialists, and individual consultants employed by sub-consultants anticipated for THIS PROJECT. a. Name and Title: Towns Holmboe – Power Engineer a. Name and Title: Bobbye DeWitte – Technician 1 b. Project Assignment:

Transmission Design/Relocation

b. Project Assignment: CAD Technician



d. Years experience: With this firm 2 months With other firms d. Years experience: With this firm With other firms 13 years e. Education: Degree(s)/Year/Specialization

BS Civil Engineering, University of Oklahoma

e. Education: Degree(s)/Year/Specialization Francis Tuttle – Student/CAD Specialist Certificate OSUOKC – Associate of Science in Architectural Technology Southern Oklahoma Area Vocational Technical Center – Drafting Certificate




AutoCAD PLS CAD (training current) Attended Design of Transmission Lines, Structures, and Foundations – University of Wisconsin-Madison Recent Projects include: Altus – Little Spadra Relocation S.E. Landfill Relocation


Ms. DeWitte is proficient in the use of

AutoCAD 2012, MicroStation and Microsoft Office

At Cobb Engineering Company, she creates and edits Transmission and Substation drawings.


6. Brief resume of key persons, specialists, and individual consultants employed by sub-consultants anticipated for THIS PROJECT. a. Name and Title: Jeff Keena Inspector/Lab Technician a. Name and Title: Gary Chaffin Inspector b. Project Assignment:

CM Inspector/Lab Technician

b. Project Assignment: CM Inspector



d. Years experience: With this firm .5 With other firms 30 d. Years experience: With this firm .25 With other firms 37 e. Education: Degree(s)/Year/Specialization

e. Education: Degree(s)/Year/Specialization Bachelor’s Degree in Business Management, University of Oklahoma, 1992



Other experience and qualifications relevant to the proposed project: ODOT Materials Sampling Certification, 2124 ODOT Aggregates Certification, 2124

g. Mr. Keena has over 30 years of experience with the Oklahoma Department of Transportation. 13 years were spent at the El Reno Residency performing Survey, Inspection, and Lab duties. 18 years were spent at the ODOT Materials Division performing Liaison duties in multiple field divisions. Mr. Keena is experienced with the following tests:

Nuclear Density Fresh Concrete Test Concrete Compressive Test Procter Soil Classifications Aggregate Gradations

g. Mr. Chaffin has over 37 years of experience with the Oklahoma Department of Transportation. 11 years were spent at the Wewoka Residency with duties ranging from Survey to Audit to oversight of the Materials Testing Lab. He spent one year in the Local Government section of the Division III headquarters before becoming the Risk Manager for Division III for 25 years. Duties at Division III also included a stint as the acting Assistant Division Engineer for Maintenance for periods totaling 1 year.


6. Brief resume of key persons, specialists, and individual consultants employed by sub-consultants anticipated for THIS PROJECT. a. Name and Title Dewey Peters, E.I. a. Name and Title: Andy Blankenship, E.I. b. Project Assignment:

Engineering Intern, Project Engineer Technician




d. Years experience: With this firm >1 With other firms 20+ d. Years experience: With this firm >1 With other firms e. Education: Degree(s)/Year/Specialization

Associates of Science/1983/Drafting and Design Technology Bachelor of Science/2011/Civil Engineering

e. Education: Degree(s)/Year/Specialization B.S. Civil Engineering, 2012 University of Arkansas, Fayetteville

f. Active Registration: State/Year first registered/Discipline/Oklahoma License Number Oklahoma, 2012, E.I. 14895



Mr. Peters serves as project civil engineer technician and assists the project manager with project design, planning, coordination and communication. His representative project experience includes: Various City of Tulsa Street rehabilitation projects.

Tuxedo Boulevard Replacement and Rehabilitation, City of Bartlesville, Oklahoma. AutoCAD Civil 3D was for the design of the roadway along with the relocation of an existing waterline. Site planning and design

.

g. Other experience and qualifications relevant to the proposed project: Mr. Blankenship serves as project civil engineer technician and assists the project manager with project design, planning, coordination and communication. His representative project experience includes: Various City of Tulsa Street rehabilitation projects.

Tuxedo Boulevard Replacement and Rehabilitation, City of Bartlesville, Oklahoma. AutoCAD Civil 3D was for the design of the roadway along with the relocation of an existing waterline. Site planning and design


6. Brief resume of key persons, specialists, and individual consultants employed by sub-consultants anticipated for THIS PROJECT. a. Name and Title: Dwayne Dunfee, Transportation Inspector III/Design Technician a. Name and Title: Matthew Overall, LSI – Survey Crew Chief b. Project Assignment:

Airport Inspector/Design Technician

b. Project Assignment: Survey Crew Chief/Drafting Support/CAD Technician



d. Years experience: With this firm >1 With other firms 26 d. Years experience: With this firm >1 With other firms 6 e. Education: Degree(s)/Year/Specialization

AS/1996/University of California, Modesto JC. Survey Technology.

e. Education: Degree(s)/Year/Specialization LSI

f. Active Registration: State/Year first registered/Discipline/Oklahoma License Number LSIT, CA, #6792



Mr. Dunfee’s responsibilities in the Airport Division of Cobb Engineering Company is to provide technical support during the design phase and inspection and oversight during construction. Prior to joining Cobb Engineering Company, he served as construction inspector for the City of Ceres, and City of Escalon, CA and was responsible for the construction management of projects which included inspection, and construction oversight. As such he was responsible for alterations, maintenance and repair projects on buildings, streets, utility systems and all other real property. installed He coordinated all engineering decisions with the lead project engineer, City Engineers, Facility Users, and the project subcontractors. He is experienced in both Design/Build and Bid/Build projects with the City of Ceres, and Escalon as the City’s liaison.

Mr. Dunfee also is an LSIT, and has numerous years of Land Surveying experience, providing construction support, land boundary knowledge, slope staking, and alignment control.

Projects that Mr. Dunfee has worked on include a shoulder widening of a 9000 ft runway, an MALSR extension, reconstruction and widening of access roads, and drainage reconstruction for the Bert Mooney Regional Airport, Butte, MT.

g. Other experience and qualifications relevant to the proposed project: Mr. Overall serves as a survey Crew Chief and his primary role is to lead survey field crews on projects for several clients including the following:




Mr. Overall also assists in generating proposals and fee estimates.


6. Brief resume of key persons, specialists, and individual consultants employed by sub-consultants anticipated for THIS PROJECT. a. Name and Title: Katie Johnson-CADD Tech a. Name and Title John Hawkins, E.I. b. Project Assignment:

Design Drafter




d. Years experience: With this firm Less than 1 year With other firms d. Years experience: With this firm <1 With other firms

e. Education: Degree(s)/Year/Specialization ITT-Technical Institute 2 years Associates Degree in Computer Aided Drafting and Design (2011)

e. Education: Degree(s)/Year/Specialization B.S. in Civil Engineering, 2010, Oklahoma State University M.S. in Civil Engineering, 2012, Oklahoma State University


f. Active Registration: State/Year first registered/Discipline/Oklahoma License Number Oklahoma, 2011 (2009 exam), E.I.T., No. 14560


Capstone Project-Architectural design for a 4,000 sq. ft. residential home.


Mr. Hawkins is involved in Transportation Design and Structural Design at Cobb Engineering Company. His responsibilities and duties have required him to work closely with project managers, engineers, and technicians on various projects. He has utilized his engineering education by performing engineering calculations, executing design operations, and demonstrating problem solving abilities. He has worked on a variety of projects for cities, counties, and the State of Oklahoma.


6. Brief resume of key persons, specialists, and individual consultants employed by sub-consultants anticipated for THIS PROJECT. a. Name and Title: Bryan A. Salsieder – GIS Specialist a. Name and Title: Brian Bird, LSI, Survey Party Chief b. Project Assignment:

Production Support

b. Project Assignment: Survey Party Chief, Drafting Support




BS in Geography with emphasis in GIS technologies, 2011

e. Education: Degree(s)/Year/Specialization BS in Biology,2000, University of Kansas AAS in Civil/Survey Technology, Oklahoma State University – OKC




Mr. Salsieder’s provides design and drafting support for the Transportation, Municipal and Airport divisions of Cobb Engineering Company, which have included projects for the Oklahoma Department of Transportation. He also provides map creation and GIS data processing support for GPS survey projects and is proficient in the use of ArcGIS. Mr. Salsieder’s recent project experience and work elements have included:

ODOT Sign Inventory Map Creation Data Processing Quality Assurance

g. Other experience and qualifications relevant to the proposed project: Mr. Bird serves as a survey Party Chief and his primary role is to lead survey field crews on projects for several clients including the following:


College and Mustang Public Schools In addition to leading field crews Mr. Bird is responsible for field preparation and post-processing of a variety of surveys including:


Mr. Bird also assists in generating proposals and fee estimates.


7. Work by firm or members which best illustrates current qualifications relevant to THIS PROJECT (list not more than 10 projects).

a. Project Name and Location "P", "C",

"JV" or "I" b. Nature Of Firms Responsibility c. Project Owner’s Name and Address d. Completion

Date e. Est. Cost (000’s)

Entire Project

Firm’s Portion

1. On Demand Engineering Services C Survey, Engineering Deisgn, Software Design, Construction Management and Inspection, Studies and Planning

Oklahoma Department of Transportation 200 N.E. 21st Street Oklahoma City, OK 73105

2007 250 250

2. On Demand Survey Services C Survey Services Oklahoma Department of Transportation 200 N.E. 21st Street Oklahoma City, OK 73105

2008 250 250

3. On Demand Construction Management Services

C Construction Management and Inspection Services


2007 N/A N/A

4. Truss Bridge Inspections - Statewide

C Bridge Inspections with the use of specialized equipment including snooper truck, tracker, manlift and climbing equipment


2007 N/A N/A

5. Muskogee Turnpike-Muskogee, OK

C Muskogee Turnpike Construction Observation and Quality Assurance Engineering and Testing Services

Oklahoma Turnpike Authority P.O. Box 11357 Oklahoma City, OK 73136

2007 N/A N/A

6. County Improvemetns for Roads and Bridges (CIRB)

C Program Manager for Caddo, Carter, Comanche, Cotton, Grady, Jefferson, Love, Murray and Stephens Counties


2007 N/A N/A

7. On Demand NEPA Support Services

C NEPA Support Services Oklahoma Department of Transportation 200 N.E. 21st Street Oklahoma City, OK 73105

2007 250 250

8. EC-1010, Bridge Rehabilitations C Bridge Rehabilitiations for ODOT Field Divisions 5 and 6


2007 N/A 80

9. EC-1087, SAB Bridge Replacements

C Bridge Replacements, Design, Coordination, specifications


2007 614 50

10. On Demand Engineering Services C Engineering, Survey & Construction Management and Inspection Services

Department of Central Services 2401 N. Lincoln Blvd. Oklahoma City, OK 7310

2007 100 100


8. Use this space to provide any additional information or description of resources (including any computer design capabilities) supporting your firm's qualifications for the proposed project.

Vision Statement The vision of Cobb Engineering Company is to empower our people to continuously deliver technically superior and highly professional services in a consistent, ethical and cost effective manner.

To our employees, we will maintain an environment that respects your contributions and personal growth, while challenging you to achieve even greater professional accomplishments.

To our clients, we will commit our reputation and resources to become an indispensable partner in every aspect of our relationship with you, providing innovative thingking, client-focused service and results-oriented performance that consistently meets project objectives and exceeds your expectations.

To the Community, we will be accountable for the delivery of leading edge planning, design and construction services that precisely fit your needs, use and expectations.

History Cobb Engineering Company was established in 1921 by the late Fred Cobb. In 1968, James D. Cobb, P.E., P.L.S. purchased the company from his father and began his quest for providing quality professional engineering services. With his core values firmly embedded in the sooner state's red soil, Jim Cobb has grown his company with integrity and a strong pursuit of ethical business practices. Mr. Cobb currently serves as the Director, utilizing more than 45 years of experience for Quality Control reviews. Daily operations of Cobb Engineering are managed by Martin P. Hepp, P.E., President.

Cobb Engineering Company consists of more than 85 employees throughout four Oklahoma offices, Oklahoma City, Duncan, Ada and Tulsa. CEC has established firm relationships with highly respected subconsultants throughout Oklahoma. CEC understand and believes in the importance of maintaining strong relationships within this industry.

9. 61 O.S., § 64. Offenses Any consultant or person doing architectural, surveying or engineering work for the State of Oklahoma, their agents, servants or employees, who shall receive gratuity from any contractor or builder of any public building or works, or solicit, receive or make any political contribution from or to a contractor or a builder of any public building or works, or who attempts to interfere with the competitive bidding process of the State of Oklahoma in any manner, is guilty of a misdemeanor, and upon conviction thereof shall be fined not less than One Hundred Dollars ($100.00) nor more that Five Hundred Dollars ($500.00), and by imprisonment in the county jail for not less than six (6) months nor more than one (1) year. Any contractor or builder of any public building or works, their agents, servants or employees, who shall offer any gratuity or political contribution to any consultant doing architectural, surveying or engineering work for the State of Oklahoma, or who attempts to interfere with the competitive bidding process of the State of Oklahoma in any manner, is guilty of a misdemeanor, and upon conviction thereof shall be fined not less than One Hundred Dollars ($100.00) nor more than Five Hundred Dollars ($500.00), and by imprisonment in the county jail for not less than six (6) months nor more than one (1) year.

10. The foregoing is a statement of facts. My signature below indicates I have read the above excerpt from Title 61 of the Oklahoma Statutes. Date: Return this form along with your letter expressing interest to the agency from whom you received the notice of this project.

Signature: ________________________________ Typed Name and Title: Martin P. Hepp, P.E., President 7/31/2012

Documents

OFF-SYSTEM BRIDGE INSPECTION EC-1426