No.ERYT031H

Original om Ron EU DECLARATION OF CONFORMITY

1. Product Models/Products:

G9SX-NS series. D40A-1 C series

2. Name and address of the manufacturer:

OMRON Corporation

Shiokoji Horikawa. Shimogyo-Ku. Kyoto. 600-8530 Japan

3. This declaration of conformity is issued under the sole responsibility of the manufacturer.

4. Objects of the declaration:

G9SX-NS series. D40A-1 C series. Safety Control Device

5. The objects of the declaration described above are in conformity with the relevant Union

harmonisation legislation:

2014/30/EU EMC Directive

2006/42/EC Machinery Directive

6. References to the relevant harmonised standards used or references to the other

technical specifications in relation to which conformity is declared:

EMC Directive: EN 61000-6-4: 2007/A1: 2011. EN 61000-6-2:2005

Machinery Directive: EN ISO 13849-1: 2015, EN 60947-5-3: 2013

Signed and on behalf of: OM RON Corporation

Place and date of issue: Kyoto. Japan ).!} , J !.A/ . ").-.0/ b

Signature:

Name: Function:

Jaehyounq Yu Industrial Automation Company, Safety Division Safety Product Management Group. Manager

Name and address of contact in EU

OMRON Europe B.V.

Quality & Environment Department

Attn: J.J.P.W. Vogelaar. European Quality & Environment Manager

Zilverenberg 2. 5234 GM. 's-Hertogenbosch. The Netherlands

1/2 GQ-151845Al

Additional information

Types List for EU Directive

1. Safety Controller, Type G9SX-NS series

Model

G9SX-NSA222-T03-RC

G9SX-NSA222-T0 3-RT

G9SX-NS202-RC

G9SX-NS202-RT

G9SX-NS202-300-RT

G9SX-NSA222-T03-300-RT

2. Non-Contact Switch, Type D40A-1 C series

Model

D40A-1C2

D40A-1C5

D40A-1 C004-F

D40A-1C015-F

No.ERYT031H

2/2 GQ-151845Al

No.ERYT040E

Original om Ron EU DECLARATION OF CONFORMITY

1. Product Models/Products:

G9SX-NS series, D40A-S1 series, D40A-A1 series

2. Name and address of the manufacturer:

OMRON Corporation

Shiokoji Horikawa, Shimogyo-Ku, Kyoto, 600-8530 Japan

3. This declaration of conformity is issued under the sole responsibility of the manufacturer.

4. Objects of the declaration:

G9SX-NS series, D40A-S1 series, D40A-A1 series, Safety Control Device

5. The objects of the declaration described above are in conformity with the relevant Union

harmonisation legislation:

2014/30/EU EMC Directive

2006/42/EC Machinery Directive

6. References to the relevant harmonised standards used or references to the other

technical specifications in relation to which conformity is declared:

EMC Directive: EN 61000-6-4: 2007/A1: 2011, EN 61000-6-2:2005

Machinery Directive: EN ISO 13849-1: 2015, EN 6094 7-5-3: 2013

Signed and on behalf of: OMRON Corporation }

Place and date of issue: Kyoto, Japan ?-1 ' JLA! . ~v/6

Signature:

Name: Function:

1£~~! Jaehyoung Yu Industrial Automation Company, Safety Division Safety Product Management Group. Manager

Name and address of contact in EU

OMRON Europe B.V.

Quality & Environment Department

Attn: J.J.P.W. Vogelaar, European Quality & Environment Manager

Zilverenberg 2, 5234 GM, 's-Hertogenbosch, The Netherlands

112 GQ-151845Al

Additional information

Types List for EU Directive

1. Safety Controller, Type G9SX-NS series

Model

G9SX-NSA222-T03-RC

G9SX-NSA222-T0 3-RT

G9SX-NS202-RC

G9SX-NS202-RT

G9SX-NS202-300-RT

G9SX-NSA222-T03-300-RT

2. Non-Contact Switch, Type D40A-S1C series

Model

D40A-S1C2

D40A-S1C5

3. Actuator, Type D40A-A 1 series

Model

D40A-A1

No.ERYT040E

2/2 GQ-151845Al

..,. 0

CERTIFICATE No. Z10 1512 39656 305

Holder of Certificate: Omron Corporation Shiokoji Horikawa,Shimogyo-ku Kyoto

Certification Mark:

Product:

600-8530 JAPAN

Safety components Safety Control Device

Product Service

The product was tested on a voluntary basis and complies with the essential requirements. The certification mark shown above can be affixed on the product. It is not permitted to alter the certification mark in any way. In addition the certification holder must not transfer the certificate to third parties. See also notes overleaf.

Test report no.:

Valid until:

Date, 2016-01-07

Page 1 of 4

717500613

2021-01-06

( Peter Weiss )

TOV SOD Product Service GmbH · Zertifizierstelle · RidlerstraBe 65 · 80339 MUnchen . Germany

CERTIFICATE Product Service

No. Z10 15 12 39656 305

Model(s):

Parameters:

Tested according to:

F actory(ies):

Page 2 of4

Safety Controller: G9SX-NS series For nomenclature of product type see attachment Non contact switch: D40A series For nomenclature of product type see attachment

Controller: Line Voltage: Power consumption:

Protection class: Non contact switch: Protection class:

2006/42/EC IEC 61508-1(ed.2) (SIL 1-3) IEC 61508-2(ed.2) (SIL 1-3) IEC 61508-3(ed.2) (SIL 1-3) EN 61508-1:2010 (SIL 1-3) EN 61508-2:2010 (SIL 1-3) EN 61508-3:2010 (SIL 1-3) IEC 60204-1 (ed.5);am1 EN 60204-1:2006/A1:2009 IEC 60947-5-3(ed.2) (PDDB) EN 60947-5-3:2013 (PDDB) EN ISO 14119:2013 EN 50178:1997

24VDC -15/+10% G9SX-NSA222 4W max. G9SX-NS 202 3W max. IP 20

IP 67

ISO 13849-1 :2006 (Cat.3, PL d) EN ISO 13849-1:2008 (Cat.3, PL d)

56891

, .. ",® TOV SOD Product Service GmbH · Zertifizierstelle · Ridlerstra~e 65 · 80339 MOnchen · Germany 1uv

ATTACHMENT TO CERTIFICATE No. Z10 15 12 39656 305

Nomenclature of Product type

G9SX - (I) (II) (Ill) (IV)-(V)-(VI)-(VII)

(I) Function

Number Function

NSA Non-contact Switch Controller with Extra function

(Connection with G9SX-EX and mechanical switches)

NS Non-contact Switch Controller

(II) Numbers of safety instantaneous output elements

Number Numbers of safety output elements

2 2 output elements

_(Ill} Numbers of off-delayed safety output elements

Number Number of off-delayed safety output elements

0 None (NS only)

2 2 output elements (NSA only)

(IV) Numbers of auxiliary non-safety output elements

Number Number of auxiliary non-safety outputs

2 2 output elements

(V) Off-delay time

Number Off-delay time

T03 0-3 sec changeable (NSA only, max. 3sec)

None None

(VI) Additional suffix

Number Additional suffix

None Standard type

XXX Additionalletter(s), number(s), and/or dash:

Identification for specific customer product.

Note: The difference of product is no influence to safety functions.

(VII) Plug type

Number Plug type

RT Removable COMBICON plugs

RC Removable COMBICON spring cage plugs

Page 3 of4

Product Service

TOV SOD Product Service GmbH · Zertifizierstelle · RidlerstraBe 65 · 80339 Mlinchen · Germany

:::

ATTACHMENT TO CERTIFICATE No. Z10 15 12 39656 305

D40A - (I) (II) (Ill) (IV)-(V)

(I) Sales conformation

Number Type

None Sensor and Actuator

s Sensor only

A Actuator only

(II) Type

~~umw I Type

(Ill) Auxiliary output

Number Auxiliary output

c PN P transistor output

None Actuator only

(IV) Cable length

Number Cable length

004 4cm

015 15cm

2 2m

5 5m

None Actuator only

(V) Wiring connection

Number Number of auxiliary non-safety outputs

None When (I) = None or S, Pre-wired.

When (I) = A, Actuator only.

F M12 FA Connector

Page 4 of4

Product Service

TOV SOD Product Service GmbH · Zertifizierstelle · Ridlerstrage 65 · 80339 Miinchen · Germany

5/30/2018 NRGF.E239047 - Programmable Safety Controllers

http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/showpage.html?name=NRGF.E239047&ccnshorttitle=Programmable+Safety+Controllers&objid=10770

NRGF.E239047 Programmable Safety Controllers

Page Bottom

Programmable Safety Controllers See General Information for Programmable Safety Controllers OMRON CORP E239047SAFETY STANDARDS GROUPIAB GLOBAL QUALITY CENTERSHIOKOJI HORIKAWASHIMOGYO-KU, KYOTO 600-8530 JAPAN

Programmable safety controller, open type, Series G9SX followed by AD, BC, EX or ADA, followed by 0, 1, 2, 3 or 4, followed by 0, 1, 2, 3 or4, followed by 0, 1 or 2, may be followed by 1 or 2, may be followed by T, T005, T01, T15 or T150, may be followed by additional suffix, followedby RT or RC.

Open-type programmable safety controllers, Type NE1A followed by -SCPU, followed by 01 or 02, may be followed by -L or -EIP, may befollowed by -V1, may be followed by -SM, may be followed by additional letter(s) and/or number(s) for sales purpose.

Open type programmable safety controller, Series G9SX followed by NSA or NS, followed by 0 or 2, followed by 0 or 2, followed by 0 or 2,followed by blank or T03, may be followed by additional suffix, followed by RT or RC.

Open-type programmable safety controller accessory, Remote I/O Terminal, Model DST1 followed by -ID12SL-1, -ID12SL-1-SM, -MD16SL-1, -MD16SL-1-SM, -MRD08SL-1, -MRD08SL-1-SM, -MRD08SL-1-BH or -XD0808SL-1.

Open type programmable safety controllers, G9SX-GS226-T15-RC,G9SX-GS226-T15-RT.

Open-type, programmable safety controller, Type NE0A followed by -SCPU, followed by 01, may be followed by additional letter(s) and/ornumber(s) for sales purpose.

Open-type, programmable safety controller , NE2A Series made up of the following system components: Safety CPU Units - Model NE2A-SCPU01, End Cover - Model NE2A-TER01, End Unit - Model NE2A-END, Power Supply Units - Model NE2A-PD025, Safety I/O Units Inputs - ModelNE2A-SID4-1, Safety I/O Units Outputs - Model NE2A-SOD4-1, DeviceNet Safety Units - Model NE2A-DNS21, EtherNet/IP Safety Units - ModelNE2A-ENS21.

Trademark and/or Tradename: and/or

Last Updated on 2016-02-02

Questions? Print this page Terms of Use Page Top

© 2018 UL LLC

The appearance of a company's name or product in this database does not in itself assure that products so identified have been manufacturedunder UL's Follow-Up Service. Only those products bearing the UL Mark should be considered to be Certified and covered under UL's Follow-UpService. Always look for the Mark on the product.

UL permits the reproduction of the material contained in the Online Certification Directory subject to the following conditions: 1. The GuideInformation, Assemblies, Constructions, Designs, Systems, and/or Certifications (files) must be presented in their entirety and in a non-misleadingmanner, without any manipulation of the data (or drawings). 2. The statement "Reprinted from the Online Certifications Directory with permissionfrom UL" must appear adjacent to the extracted material. In addition, the reprinted material must include a copyright notice in the followingformat: "© 2018 UL LLC".

Here are the links to the following OMRON UL File: NRGF.E239047 - Programmable Safety Controllers Put the cursor on the link (underlined & highlighted in blue), press Ctrl, then Click. This will bring you to UL’s Online Directory for that UL File Company Name Category Name Link to File

OMRON CORP Programmable Safety Controllers NRGF.E239047

5/30/2018 NRAQ.E95399 - Programmable Controllers

http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/showpage.html?name=NRAQ.E95399&ccnshorttitle=Programmable+Controllers&objid=1074109164&c

NRAQ.E95399 Programmable Controllers

If you notice a change to your NRAQ Listing Card, click here to learn more.

Page Bottom

Programmable Controllers See General Information for Programmable Controllers OMRON CORP E95399SAFETY STANDARDS GROUPIAB GLOBAL QUALITY CENTERSHIOKOJI HORIKAWASHIMOGYO-KU, KYOTO 600-8530 JAPAN

Trademark and/or Tradename: ,

Investigated to ANSI/UL 508

3F88L Series cam positioners Model(s) 3F88L-160, 3F88L-162

Accessory connector harness Model(s) XW2Z Series, followed by -, followed by a three digit suffixs, followed by X, K or Y.*

Accessory motion module to wire terminal cables Model(s) XW2Z followed by 001 thru 999, followed by J-, followed by A28, A30 or A31.*

Analog I/O terminals Model(s) SRT2 followed by -AD or -DA, may be followed by -02 or -04, may be followed by -300 thru -999.

Analog I/O units Model(s) GT1, followed by -AD, -DA or -TS, may be followed by -04 or -08, may be followed by -T or -P, may be followed by -MX, may be followed by CST, may be followed by -300 thru-999.

Analog input/output terminals Model(s) DRT1 may be followed by AD, DA or TS, may be followed by 02 or 04, may be followed by H, P or T.

SRM1, may be followed by C, may be followed by 01 or 02, may be followed by V1 or V2, may be followed by -300 thru -999.

Battery units Model(s) ZEN-BAT01*

C500 input temperature modules Model(s) C500-TS501*

Communication adaptors Model(s) ITNC-SGB01

Communication interface units Model(s) ZEN-CIF01*

Communication modules, profibus DP slave units Model(s) PRT1-COM*

Communication units Model(s) DRT1-COM*

Communication units connecting to device net Model(s) DRT1, followed by -232C, may be followed by -2, -3 or -4, may be followed by -300thru -999.

Communication units connecting to device net, open type Model(s) NT-DRT21*

Counter units for communication units Model(s) GT1, followed by -CT01, may be followed by -300 thru -999.

Counter units, for use with Sereis C200H programmable controllers Model(s) C500-CT021

Coupling modules, microinterfaces Model(s) P2RVC-8-I-D, P2RVC-8-I-F, P2RVC-8-O-D, P2RVC-8-O-F

CPM2C Series power supplies Model(s) CQM2C-PA201

5/30/2018 NRAQ.E95399 - Programmable Controllers

http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/showpage.html?name=NRAQ.E95399&ccnshorttitle=Programmable+Controllers&objid=1074109164&c

CPU units Model(s) ZEN followed by 10 or 20, followed by C, followed by 1, 2, 3 or 4, followed by A, followed by R, followed by A, followed byV2*

ZEN, followed by 10 or 20, followed by C, followed by 1 or 2, followed by A or D, followed by R or T, followed by A or D.*

ZEN, followed by 10 or 20, followed by C, followed by 1, 2, 3 or 4, followed by D, followed by R or T, followed -D, followed by -V2.*

ZEN-8E1DR*, ZEN-8E1DT*

CV500 temperature controller data link units Model(s) CV500-TDL21

Ethernet switching bubs, "W4S1 Series" Model(s) W4S1-03B*, W4S1-05B*

Expansion I/O units Model(s) ZEN-4EAR*, ZEN-4EDR*, ZEN-8E1-AR*, ZEN-8EAR*, ZEN-8EDR*, ZEN-EDR*

FL remote IDs Model(s) B680-HAM81*, B680-HAM91*, V680-HAM42-DRT*, V680-HAM42-FRT*

G9SX Series programmable controllers, open type Model(s) G9SX followed by AD, BC, EX or ADA, followed by 0, 1, 2, 3 or 4, followed by 0,1, 2, 3 or 4, followed by 0, 1 or 2, may be followed by 1 or 2, followed by blank, T, T005, T01, T15 or T150, may be followed by additional suffix,followed by RT or RC.

GRT1 Series slice remote terminals, counter units, open type Model(s) GRT1-CT1*, GRT1-CT1-1*

GRT1 Series slice remote terminals, counter/positioner units, open type Model(s) GRT1-CP1-L*

GRT1 Series slice remote terminals, digital input units, open type Model(s) GRT1-IA4-1*, GRT1-IA4-2*, GRT1-ID8*, GRT1-ID8-1*

GRT1 Series slice remote terminals, digital output units, open type Model(s) GRT1-OD4G-1*, GRT1-OD4G-3*, GRT1-OD8*, GRT1-OD8-1*,GRT1-OD8G-1*

GRT1 Series slice remote terminals, mechatrolink II communication units, open type Model(s) GRT1-ML2*

GRT1 Series slice remote terminals, memory end units, open type Model(s) GRT1-END-M*

GRT1 Series slice remote terminals, power connection units, open type Model(s) GRT1-PC8*, GRT1-PC8-1*

GRT1 Series slice remote terminals, power feed units, open type Model(s) GRT1-PD2G*, GRT1-PD8*, GRT1-PD8-1*

GRT1 Series slice remote terminals, profibus communication units, open type Model(s) GRT1-PRT*

GRT1 Series slice remote terminals, profinet I/O communication units, open type Model(s) GRT1-PNT*

GRT1 Series slice remote terminals, temperature input units, open type Model(s) GRT1-TS2T*

GRT1 Series slice remote terminals, terminal end units, open type Model(s) GRT1-END*

HSH Series accessories, connecting cables Model(s) NSH5, followed by 232 or 422, followed by UL, followed by 3M or 10M, may be followedby additional letter(s) and/or number(s).

I/O modules same as Sysmac-C250 Series I/O cables Model(s) Sysmac I/O cables (Sysmac-C120 and C500 Series)

ID sensor units Model(s) CJ1W-V680C11*, CJ1W-V680C12*, CS1W-V680C11*, CS1W-V680C12*

Inductive power coupler receivers Model(s) B7AP-M1, B7AP-M1C

Inductive power coupler transmitters Model(s) B7AP-S1, B7AP-S1C

Interactive displays Model(s) NT20S, followed by S, followed by N or T, followed by 1, followed by 1, 2 or 6, followed by 1 thru 8, may befollowed by B, may be followed by V1 thru V9.

NT600S, followed by S, followed by T, followed by 1 or 2, followed by 1 or 2, followed by 1 or 8, may be followed by B, may be followed by V1thru V9.

Interface units Model(s) CPM2C-CIF, E58-CIFM1

Low speed monitoring units, open type Model(s) G9SX-LM followed by 0 or 2, followed by 2 or 3, followed by 2 or 4, followed by F10 or none,followed by RT or RC.

Memory units Model(s) ZEN-ME01*

Motion control boards, open type Model(s) R88A-MCW151-DRT-E, R88A-MCW151-E

Multi channel power controllers (MCPC) Model(s) G3ZA followed by 4H or 8A, followed by 2 or 4, followed by 03, may be followed by FLK.*

NSH Series accessories, connecting cables Model(s) NSH-232UL-10M, NSH-232UL-3M, NSH-422UL-10M, NSH-422UL-3M

NSH Series programmable terminals Model(s) NSH, followed by 5, followed by T, S or M, followed by S, V or Q, followed by a letter, followedby 0 thru 9, followed by 0 or 1, may be followed by B.*

Open type, Programmable controllers Model(s) CJ1W-MC221

G9SX followed by NSA or NS, followed by 0 or 2, followed by 0 or 2, followed by 0 or 2, may be followed by T03, followed by Blank or additionalsuffix, followed by RT or RC

PLC terminal units, "XW2B Series" Model(s) XW2B-20G4*, XW2B-40G4*, XW2B-50G4*

Porgrmmable controllers Model(s) CPM2C followed by MAD11, SRT21, TS001 or TS101, may be followed by a number from 300 thru 999.

CPM2C, followed by -S, followed by 0 or 1, may be followed by 0 or 1, followed by 0, followed by C or M, may be followed by -DRT, may befollowed by 300 thru 999.

5/30/2018 NRAQ.E95399 - Programmable Controllers

http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/showpage.html?name=NRAQ.E95399&ccnshorttitle=Programmable+Controllers&objid=1074109164&c

Temperature controller units Model(s) CQM1-TC may be followed by 0, 1, 2 or 3, followed by 0, may be followed by 1, 2, 3 or 4, may befollowed by letters and/or numbers, may be followed by -300 thru -999.

Terminals Model(s) DRT1 or SRT2, followed by ID or OD, followed by 04 or 08, followed by CL, may be followed by 1*

Trajexia TJ1 and TJ2 Series CANopen slave units, open type Model(s) TJ1-CORT

Trajexia TJ1 and TJ2 Series DeviceNet slave units, open type Model(s) TJ1-DRT

Trajexia TJ1 and TJ2 Series EtherCat master units, open type Model(s) TJ2-ECT04, TJ2-ECT16, TJ2-ECT64

Trajexia TJ1 and TJ2 Series flexible axis units, open type Model(s) TJ1-FL02

Trajexia TJ1 and TJ2 Series G5 Serial interface units, open type Model(s) TJ2-KS02

Trajexia TJ1 and TJ2 Series Mechatrolink-II master units, open type Model(s) TJ1-ML04, TJ1-ML16

Trajexia TJ1 and TJ2 Series motion control units, open type Model(s) TJ1-MC04, TJ1-MC16, TJ2-MC02, TJ2-MC64

Trajexia TJ1 and TJ2 Series profibus DP slave units, open type Model(s) TJ1-PRT

Trajexia TJ1 and TJ2 Series terminator units, open type Model(s) TJ1-TER

Wireless communication transceivers Model(s) WD30-ME or WD30-SE, may be followed by 01, may be followed by letter(s) and/or number(s)(1 to 4 digits).

Wireless terminals Model(s) WT30-M may be followed by 01, ID or MD, may be followed by 16, may be followed by -1, may be followed by -FLK, may be followed by AT001, AT002 or AT003, may be followed by 30 thru 99 or 200 thru 299.

Investigated to UL 61010-1 and UL 61010-2-201

Compact vision system, FH series, Controller Model(s) FH followed by -L, followed by 550, may be followed by -10, may be followed byadditional letter(s) or number(s) for sales purpose

Enclosed, Industrial, Programmable controllers, "GX series" Model(s) GX-ILM08C#

Enclosed, Industrial, Programmable controllers Model(s) V780-HMD68($)

Enclosed, Programmable controllers Model(s) V680S-HMD63, followed by -EIP or -PNT, V680S-HMD64-EIP, V680S-HMD64-PNT, V680S-HMD66, followed by -EIP or -PNT

I/O Relay Terminals, Open type Model(s) G70V, followed by -SID or -SOC, followed by 16, followed by P, may be followed by -1, may befollowed by -C16 or -C4, may be followed by any suffix(es)

Open-type, Compact vision system, FH series Model(s) FH(a)

Investigated to

Enclosed, Programmable controllers Model(s) V680S followed by HMD, followed by 63, followed by ETN may be followed by additional letter(s)and/or number(s) for sales purposes.

# - Above type names may be followed by additional letter(s) and/or number(s) for sales purposes.

(a) - followed by -20 or -50, followed by 5, followed by 0, may be followed by -10 or -20, may be followed by additional letter(s) or number(s) forsales purpose.

* - May be followed by letters and/or numbers.

Last Updated on 2018-05-21

Questions? Print this page Terms of Use Page Top

© 2018 UL LLC

The appearance of a company's name or product in this database does not in itself assure that products so identified have been manufacturedunder UL's Follow-Up Service. Only those products bearing the UL Mark should be considered to be Certified and covered under UL's Follow-UpService. Always look for the Mark on the product.

UL permits the reproduction of the material contained in the Online Certification Directory subject to the following conditions: 1. The GuideInformation, Assemblies, Constructions, Designs, Systems, and/or Certifications (files) must be presented in their entirety and in a non-misleadingmanner, without any manipulation of the data (or drawings). 2. The statement "Reprinted from the Online Certifications Directory with permissionfrom UL" must appear adjacent to the extracted material. In addition, the reprinted material must include a copyright notice in the followingformat: "© 2018 UL LLC".

5/30/2018 NRAQ7.E95399 - Programmable Controllers Certified for Canada

http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/showpage.html?name=NRAQ7.E95399&ccnshorttitle=Programmable+Controllers+Certified+for+Canad

NRAQ7.E95399 Programmable Controllers Certified for Canada

If you notice a change to your NRAQ7 Listing Card, click here to learn more.

Page Bottom

Programmable Controllers Certified for Canada See General Information for Programmable Controllers Certified for Canada OMRON CORP E95399SAFETY STANDARDS GROUPIAB GLOBAL QUALITY CENTERSHIOKOJI HORIKAWASHIMOGYO-KU, KYOTO 600-8530 JAPAN

Investigated to CAN/CSA C22.2 No. 142

3F88L Series cam positioners Model(s) 3F88L-160, 3F88L-162

Accessory connector harness Model(s) XW2Z Series, followed by -, followed by a three digit suffixs, followed by X, K or Y.*

Accessory motion module to wire terminal cables Model(s) XW2Z followed by 001 thru 999, followed by J-, followed by A28, A30 or A31.*

Analog I/O terminals Model(s) SRT2 followed by -AD or -DA, may be followed by -02 or -04, may be followed by -300 thru -999.

Analog I/O units Model(s) GT1, followed by -AD, -DA or -TS, may be followed by -04 or -08, may be followed by -T or -P, may be followed by -MX, may be followed by CST, may be followed by -300 thru-999.

Analog input/output terminals Model(s) DRT1 may be followed by AD, DA or TS, may be followed by 02 or 04, may be followed by H, P or T.

SRM1, may be followed by C, may be followed by 01 or 02, may be followed by V1 or V2, may be followed by -300 thru -999.

Battery units Model(s) ZEN-BAT01*

Communication adaptors Model(s) ITNC-SGB01

Communication interface units Model(s) ZEN-CIF01*

Communication modules, profibus DP slave units Model(s) PRT1-COM*

Communication units Model(s) DRT1-COM*

Communication units connecting to device net Model(s) DRT1, followed by -232C, may be followed by -2, -3 or -4, may be followed by -300thru -999.

Communication units connecting to device net, open type Model(s) NT-DRT21*

Counter units for communication units Model(s) GT1, followed by -CT01, may be followed by -300 thru -999.

Counter units, for use with Sereis C200H programmable controllers Model(s) C500-CT021

CPM2C Series power supplies Model(s) CQM2C-PA201

CPU units Model(s) ZEN followed by 10 or 20, followed by C, followed by 1, 2, 3 or 4, followed by A, followed by R, followed by A, followed byV2*

ZEN, followed by 10 or 20, followed by C, followed by 1 or 2, followed by A or D, followed by R or T, followed by A or D.*

ZEN, followed by 10 or 20, followed by C, followed by 1, 2, 3 or 4, followed by D, followed by R or T, followed -D, followed by -V2.*

ZEN-8E1DR*, ZEN-8E1DT*

CV500 temperature controller data link units Model(s) CV500-TDL21

Ethernet switching bubs, "W4S1 Series" Model(s) W4S1-03B*, W4S1-05B*

5/30/2018 NRAQ7.E95399 - Programmable Controllers Certified for Canada

http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/showpage.html?name=NRAQ7.E95399&ccnshorttitle=Programmable+Controllers+Certified+for+Canad

Expansion I/O units Model(s) ZEN-4EAR*, ZEN-4EDR*, ZEN-8E1-AR*, ZEN-8EAR*, ZEN-8EDR*, ZEN-EDR*

FL remote IDs Model(s) B680-HAM81*, B680-HAM91*, V680-HAM42-DRT*, V680-HAM42-FRT*

G9SX Series programmable controllers, open type Model(s) G9SX followed by AD, BC, EX or ADA, followed by 0, 1, 2, 3 or 4, followed by 0,1, 2, 3 or 4, followed by 0, 1 or 2, may be followed by 1 or 2, followed by blank, T, T005, T01, T15 or T150, may be followed by additional suffix,followed by RT or RC.

GRT1 Series slice remote terminals, counter units, open type Model(s) GRT1-CT1*, GRT1-CT1-1*

GRT1 Series slice remote terminals, counter/positioner units, open type Model(s) GRT1-CP1-L*

GRT1 Series slice remote terminals, digital input units, open type Model(s) GRT1-IA4-1*, GRT1-IA4-2*, GRT1-ID8*, GRT1-ID8-1*

GRT1 Series slice remote terminals, digital output units, open type Model(s) GRT1-OD4G-1*, GRT1-OD4G-3*, GRT1-OD8*, GRT1-OD8-1*,GRT1-OD8G-1*

GRT1 Series slice remote terminals, mechatrolink II communication units, open type Model(s) GRT1-ML2*

GRT1 Series slice remote terminals, memory end units, open type Model(s) GRT1-END-M*

GRT1 Series slice remote terminals, power connection units, open type Model(s) GRT1-PC8*, GRT1-PC8-1*

GRT1 Series slice remote terminals, power feed units, open type Model(s) GRT1-PD2G*, GRT1-PD8*, GRT1-PD8-1*

GRT1 Series slice remote terminals, profibus communication units, open type Model(s) GRT1-PRT*

GRT1 Series slice remote terminals, profinet I/O communication units, open type Model(s) GRT1-PNT*

GRT1 Series slice remote terminals, temperature input units, open type Model(s) GRT1-TS2T*

GRT1 Series slice remote terminals, terminal end units, open type Model(s) GRT1-END*

HSH Series accessories, connecting cables Model(s) NSH5, followed by 232 or 422, followed by UL, followed by 3M or 10M, may be followedby additional letter(s) and/or number(s).

I/O modules same as Sysmac-C250 Series I/O cables Model(s) Sysmac I/O cables (Sysmac-C120 and C500 Series)

ID sensor units Model(s) CJ1W-V680C11*, CJ1W-V680C12*, CS1W-V680C11*, CS1W-V680C12*

Inductive power coupler receivers Model(s) B7AP-M1, B7AP-M1C

Inductive power coupler transmitters Model(s) B7AP-S1, B7AP-S1C

Interactive displays Model(s) NT20S, followed by S, followed by N or T, followed by 1, followed by 1, 2 or 6, followed by 1 thru 8, may befollowed by B, may be followed by V1 thru V9.

NT600S, followed by S, followed by T, followed by 1 or 2, followed by 1 or 2, followed by 1 or 8, may be followed by B, may be followed by V1thru V9.

Interface units Model(s) CPM2C-CIF, E58-CIFM1

Low speed monitoring units, open type Model(s) G9SX-LM followed by 0 or 2, followed by 2 or 3, followed by 2 or 4, followed by F10 or none,followed by RT or RC.

Memory units Model(s) ZEN-ME01*

Motion control boards, open type Model(s) R88A-MCW151-DRT-E, R88A-MCW151-E

Multi channel power controllers (MCPC) Model(s) G3ZA followed by 4H or 8A, followed by 2 or 4, followed by 03, may be followed by FLK.*

NSH Series accessories, connecting cables Model(s) NSH-232UL-10M, NSH-232UL-3M, NSH-422UL-10M, NSH-422UL-3M

NSH Series programmable terminals Model(s) NSH, followed by 5, followed by T, S or M, followed by S, V or Q, followed by a letter, followedby 0 thru 9, followed by 0 or 1, may be followed by B.*

Open type, Programmable controllers Model(s) CJ1W-MC221

G9SX followed by NSA or NS, followed by 0 or 2, followed by 0 or 2, followed by 0 or 2, may be followed by T03, followed by Blank or additionalsuffix, followed by RT or RC

PLC terminal units, "XW2B Series" Model(s) XW2B-20G4*, XW2B-40G4*, XW2B-50G4*

Porgrmmable controllers Model(s) CPM2C followed by MAD11, SRT21, TS001 or TS101, may be followed by a number from 300 thru 999.

CPM2C, followed by -S, followed by 0 or 1, may be followed by 0 or 1, followed by 0, followed by C or M, may be followed by -DRT, may befollowed by 300 thru 999.

CPM2C, followed by 8, 10, 16, 20, 24 or 32, may be followed by C or E, may be followed by 1, may be followed by D, may be followed by R, T orT1, may be followed by C or M, may be followed by D, may be followed by a number from 300 thru 999.

Power supplies for use in Sysmac C200H Model(s) DL404W

Power supply units Model(s) CQM1-PA216

Programmable controllers, "Sysmac-C200H Series" Model(s) Sysmac-C200H

Programmable controllers, "Sysmac-C200HS Series" Model(s) Sysmac-C200HS

Programmable controllers, "Trajexia Series" Model(s) TJ1

5/30/2018 NRAQ7.E95399 - Programmable Controllers Certified for Canada

http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/showpage.html?name=NRAQ7.E95399&ccnshorttitle=Programmable+Controllers+Certified+for+Canad

Trajexia TJ1 and TJ2 Series terminator units, open type Model(s) TJ1-TER

Wireless communication transceivers Model(s) WD30-ME or WD30-SE, may be followed by 01, may be followed by letter(s) and/or number(s)(1 to 4 digits).

Wireless terminals Model(s) WT30-M may be followed by 01, ID or MD, may be followed by 16, may be followed by -1, may be followed by -FLK, may be followed by AT001, AT002 or AT003, may be followed by 30 thru 99 or 200 thru 299.

Investigated to CAN/CSA-C22.2 No.61010-1 and CAN/CSA-C22.2 No.61010-2-201

Compact vision system, FH series, Controller Model(s) FH followed by -L, followed by 550, may be followed by -10, may be followed byadditional letter(s) or number(s) for sales purpose

Enclosed, Industrial, Programmable controllers, "GX series" Model(s) GX-ILM08C#

Enclosed, Industrial, Programmable controllers Model(s) V780-HMD68($)

Enclosed, Programmable controllers Model(s) V680S-HMD63, followed by -EIP or -PNT, V680S-HMD64-EIP, V680S-HMD64-PNT, V680S-HMD66, followed by -EIP or -PNT

I/O Relay Terminals, Open type Model(s) G70V, followed by -SID or -SOC, followed by 16, followed by P, may be followed by -1, may befollowed by -C16 or -C4, may be followed by any suffix(es)

Open-type, Compact vision system, FH series Model(s) FH(a)

Investigated to

Enclosed, Programmable controllers Model(s) V680S followed by HMD, followed by 63, followed by ETN may be followed by additional letter(s)and/or number(s) for sales purposes.

# - Above type names may be followed by additional letter(s) and/or number(s) for sales purposes.

(a) - followed by -20 or -50, followed by 5, followed by 0, may be followed by -10 or -20, may be followed by additional letter(s) or number(s) forsales purpose.

* - May be followed by letters and/or numbers.

Trademark and/or Tradename: ,

Last Updated on 2018-05-21

Questions? Print this page Terms of Use Page Top

© 2018 UL LLC

The appearance of a company's name or product in this database does not in itself assure that products so identified have been manufacturedunder UL's Follow-Up Service. Only those products bearing the UL Mark should be considered to be Certified and covered under UL's Follow-UpService. Always look for the Mark on the product.

UL permits the reproduction of the material contained in the Online Certification Directory subject to the following conditions: 1. The GuideInformation, Assemblies, Constructions, Designs, Systems, and/or Certifications (files) must be presented in their entirety and in a non-misleadingmanner, without any manipulation of the data (or drawings). 2. The statement "Reprinted from the Online Certifications Directory with permissionfrom UL" must appear adjacent to the extracted material. In addition, the reprinted material must include a copyright notice in the followingformat: "© 2018 UL LLC".

Links to OMRON Corp Programmable Controllers: D40A, G9SX-NS, NE1A-SCPU01, DST1, CQM1-SF200, CS1W-SF200, G9SX, G9SX-GS, etc. G9S Series: G9S, G9SP, G9SA, G9SB, (and various OMRON Programmable Controllers - intended for use as components of complete equipment submitted for investigation)

Company Name Category Name Link to File

OMRON CORP Programmable Controllers NRAQ.E95399

OMRON CORP Programmable Controllers - Component NRAQ2.E95399

OMRON CORP Programmable Controllers Certified for Canada NRAQ7.E95399

OMRON CORP Programmable Controllers Certified for Canada - Component NRAQ8.E95399

See General Information for Programmable Controllers See General Information for Programmable Controllers Certified for Canada See General Information for Programmable Controllers - Component See General Information for Programmable Controllers Certified for Canada - Component

No.ESDD007D

Original om Ron EU DECLARATION OF CONFORMITY

1. Product Models/Products:

D40Z series

2. Name and address of the manufacturer:

OMRON Corporation

Shiokoji Horikawa, Shimogyo-Ku, Kyoto, 600-8530 Japan

3. This declaration of conformity is issued under the sole responsibility of the manufacturer.

4. Objects of the declaration:

D40Z series. Non-Contact Switch

5. The objects of the declaration described above are in conformity with the relevant Union

harmonisation legislation:

2014/30/EU EMC Directive

2006/42/EC Machinery Directive

6. References to the relevant harmonised standards used or references to the other

technical specifications in relation to which conformity is declared:

EMC Directive: EN 61000-6-4: 2007/A 1: 2011. EN61 000-6-2:2005

Machinery Directive: EN ISO 13849-1: 2015. EN 6094 7-5-3: 2013

Signed and on behalf of: OMRON Corporation

Place and date of issue:

Signature:

Name: Function:

Kyoto, Japan

Jaehyoung Yu Industrial Automation Company, Safety Division Safety Product Management Group. Manager

Name and address of contact in EU

OMRON Europe B.V.

Quality & Environment Department

Attn: J.J.P.W. Vogelaar, European Quality & Environment Manager

Zilverenberg 2, 5234 GM, 's-Hertogenbosch, The Netherlands

112 GQ-151845Al

Additional information

Types List for EU Directive

Non-Contact Switch, Type D40Z series

Model

D40Z-1C2

D40Z-1C5

D40Z-1C2-S

D40Z-1 C5-S

D40Z-1C-A

No.ESDD007D

2/2 GQ-151845Al

CERTIFICATE No. Z10 160439656314

Holder of Certificate: Omron Corporation

Shiokoji Horikawa, Shimogyo-ku

Kyoto

Factory(ies):

Certification Mark:

Product:

Model(s):

Parameters:

600-8530 JAPAN

56891

Safety components Safety control device

Non contact switch: D40Z-1C2/-1C5 Sensor: D40Z-1 C2-S/-1 C5-S Actuator: D40Z-1 C-A

Operating voltage: Power consumption: Operating temperature: Protection cl ass:

24Vdc -15/+10% 0,5W -10°C to +65°C IP 67

Product Service

Conditions: For usage with safety controller G9SX-NS series

Tested according tO:

2006/42/EC IEC 61508-1(ed.2) (SIL3) IEC 61508-2(ed.2) (SIL3) IEC 61508-3(ed.2) (SIL3) EN 61508-1:2010 (SIL3) EN 61508-2:2010 (SIL3) EN 61508-3:2010 (SIL3) EN 60204-1:2006/A1:2009 EN 60947-5-3:2013 EN ISO 14119:2013 EN 50178: 1997 ISO 13849-1:2006 EN ISO 13849-1:2008 (Cat 4 PL e)

The product was tested on a vOluntary basis and complies with the essential requirements. The certification mark shown above can be affixed on the product. It is not permitted to alter the certification mark in any way. In addition the certification holder must not transfer the certificate to third parties. See also notes overleaf.

Test report no.: 717502027

Valid until: 2021-05-10

. �-Date, 2016-05-11

Page 1 of 1

TÜV SÜD Product Service GmbH . Zertifizierstelle . Ridlerstraße 65 . 80339 München . Germany

5/25/2018 NKCR.E76675 - Auxiliary Devices

http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/showpage.html?name=NKCR.E76675&ccnshorttitle=Auxiliary+Devices&objid=1074106589&cfgid=107

NKCR.E76675 Auxiliary Devices

If you notice a change to your NKCR Listing Card, click here to learn more.

Page Bottom

Auxiliary Devices See General Information for Auxiliary Devices OMRON CORP E76675SAFETY STANDARDS GROUPIAB GLOBAL QUALITY CENTERSHIOKOJI HORIKAWASHIMOGYO-KU, KYOTO 600-8530 JAPAN

Trademark and/or Tradename: ,

Investigated to ANSI/UL 508

Emergency Stop Pushbutton Switches Model(s) Series A22NE, followed by -S, -M or -L, may be followed by P, may be followed by RC, RO, RSor TN, followed by -P, followed by 0, 1, 2, A, B or C, followed by 0, 1, 2, A, B or C, followed by 0, 1, 2, A, B or C, followed by -N, -A, -B, -C, -D or-E, may be followed by -B, -S or -SB.

Auxilary Device Enclosed Model(s) Switches, type D4SL-N; followed by 1, 2, 3 or 4; followed by A, B, C, D, E, F, G, H, J, K, L, M, N, P, Q or R;followed by F or D; followed by A or G; may be followed by C or D; may be followed by 4; followed by C; followed by 1, 3 or 5 may be followed byadditional letter(s) and/or number(s).

Auxilary Device Enclosed Key-type Selector Switch Model(s) A22LK, followed by 2RLA or 2RLB,followed by 22,13,or 04,may be followed byK, followed by 01, may be followed by up to 10 letters and/or numbers.

Auxilary Device Open type Model(s) G9SE Series followed by 2, 4, followed by 0, 2, followed by 1, followed by blank, T05, or T30.

Door lock switches Model(s) D4GL, followed by 1, 2, 3 or 4, followed by A thru H or J thru M, followed by B, F, L, R, D, E, G or H, followed by A,G or N, may be followed by A, B or C, may be followed by 4, may be followed by N.*

Door switches Model(s) D4BL Series, followed by 1, 2, 3 or 4, followed by C, D, E or F, followed by A, B C, D, E, F or G, followed by blank, A, B,C, D, E or F, followed by blank, 12-30 or T, followed by blank or up to six letters and/or numbers.

D4BS-11BSF1*, D4BS-11FSF1*, D4BS-11LSF1*, D4BS-11RSF1*

D4GS-N, followed by 1, 2, 3 or 4, followed by R or T, may be followed by 3, 5 or up to two letter and/or numbers, may be followed by up to sixletters and/or numbers.

D4JL, followed by 1, 2, 3 or 4, followed by A thru H, J thru N or P thru R, followed by D or F, followed by A or G, followed by C or D, followed by 5,6, 7, or 8, followed by blank, followed by blank, Y or Z, may be followed by four alphanumeric code, may be followed by six digit maximumalphanumeric code.

D4N 9120GP

D4N, may be followed by A or H, followed by 1 thru 9 or A, B or C, followed by 1, 2 or A thru G, followed by 20, 21, 21-TK, 22 thru 29, 2B, 2C,2D, 2G, 2H, 2J, 2L, 31, 32, 34, 62, 63, 72, 80, 87, RE, LE, AS, BC or AS1, may be followed by R.*

D4NL, followed by 1, 2, 3 or 4, followed by A thru H, J thru N, P or Q, followed by B, D, E, F, G, L or R, followed by A, B, C, D, E, F, G, H, J, K or L,may be followed by A thru F, may be followed by 4, may be followed by S, may be followed by Z.*

D4NS, followed by 1 thru 9 or A, B or C, followed by A thru F, followed by B, D, E, F, G, H, L or R.*

Illuminated Pushbutton Switches Model(s) Series A22N, followed by L, followed by BN, BP, BG, BM, MN, MP, MG, MM, RN, RP, or RM, followedby A or M, followed by TR, TG, TY, TW, TA, or TO, followed by A, followed by G or P, followed by 0,1,2,A,B,or C, followed by 0, followed by

5/25/2018 NKCR.E76675 - Auxiliary Devices

http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/showpage.html?name=NKCR.E76675&ccnshorttitle=Auxiliary+Devices&objid=1074106589&cfgid=107

0,1,2,A,B,or C, followed by R, G, Y, W, A, or O, followed by A, B, C, D, or E.

Illuminated Pushbuttons Switches Model(s) Series A30N, followed by L, followed by MN, MP, MG, or MM, followed by A or M, followed by TR,TG, TY, TW, TA, or TO, followed by A, followed by G or P, followed by 0,1,2,A,B,or C, followed by 0, followed by 0,1,2,A,B,or C, followed by R, G,Y, W, A, or O, followed by A, B, C, D, or E.

Illuminated Selector Switches Model(s) Series A22N, followed by W, followed by 2B, 2M, 2R, 3B, 3M, or 3R, followed by M, L, R, or B, followedby TR, TG, TY, TW, TA, or TO, followed by A, followed by G or P, followed by 0,1,2,A,B,or C, followed by 0, followed by 0,1,2,A,B,or C, followed byR, G, Y, W, A, or O, followed by A, B, C, D, or E.

Series A30N, followed by W, followed by 2M or 3M, followed by M, L, R, or B, followed by TR, TG, TY, TW, TA, or TO, followed by A, followed by Gor P, followed by 0,1,2,A,B,or C, followed by 0, followed by 0,1,2,A,B,or C, followed by R, G, Y, W, A, or O, followed by A, B, C, D, or E.

Key Selector Switches Model(s) Series A22N, followed by K, followed 2B, 2M, 2R, 3B, 3M, or 3R, followed by M, L, R, or B, followed by 01,followed by A, B, C, D, E, F, or G, followed by A, followed by G or P, followed by 0,1,2,A,B or C, followed by 0,1,2,A,B or C, followed by 0,1,2,A,Bor C.

Series A30N, followed by K, followed 2M or 3M, followed by M, L, R, or B, followed by 01, 02, 03, 04, 05, or 06, followed by A, B, C, D, E, F, or G,followed by A, followed by G or P, followed by 0,1,2,A,B or C, followed by 0,1,2,A,B or C, followed by 0,1,2,A,B or C.

Lamp Block Model(s) Series A22N, followed by Z, followed by T, followed by A, B, C, D, or E follow by P or blank, followed by blank or N.

Limit switches Model(s) D4A, followed by 3, may be followed by E, followed by 01-06, 07-V, 07-H, 08-12, 14-20 or 24, may be followed by N,followed by GM or KGM.*

D4B, followed by -1, -2, -3, -4, -5, -6, -7 or -8, followed by 1, 2, 3, 4, 5, 6, 7, 8, A, B, C or D, followed by 1 thru 8 or 00, may be followed by upto two numbers or letters, followed by N, may be followed by LD or LE.*

D4B-F, followed by 1, 2, 3 or 4, followed by 1, 2 or 3, followed by 11, 15, 1F or 1R, followed by F, may be followed by 1.*

D4BS, followed by -1, -2, -3, -4, -5, -6, -7 or -8, followed by 5, 6, 7, 8, A or B, followed by F, R, L or B, followed by S, may be followed by LD orLE.*

D4C, followed by 10, 20, 30, A0, C0 or D0, followed by a two digit number, followed by DRAJ01 or ARAJ01.*

D4C-1*, D4C-2*, D4C-3*, D4C-4*, D4C-5*, D4C-6*, D4CC-1*, D4CC-2*, D4CC-3*, D4CC-4*, D4CC-5*, D4CC-6*

D4F, followed by 1 thru 5, followed by 0 or 2, followed by 0, 2, 3, G or H, followed by a number, followed by R, L or D.*

SHL, followed by D, Q or W, with or without 1 or 2 digit number, followed by 55, followed by blank, followed by blank, L, L6 or L7, followed byblank, MD, ML or MR, followed by blank, 2 or 3, followed by blank, TC or TH, followed by blank or 11, followed by blank or T, followed by blank orup to six additional letters and/or numbers.

WL, may be followed by M, followed by RCA2-, CA2-##, CA-##, CA12-##, CL##-##, CAL##-##, RG2-, G2-##, G12-##, GL##-##, GAL##-##, RCA2-2, CA2-2##, CA-2##, CA12-2##, CL##-2##, CAL##-2##, RCA2-2N, CA2-2##N, CA-2##N, CA12-2##N, CL##-2##N orCAL##-2##N, RGCA-, GCA2-##, GCA12-##, GCL##-##, GCAL##-##, RCA32-, CA32-###, D###-, D2###-, D3###-, SD###-, SD2###-,SD3###-, NJ-###, NJ-S### or GNJ-###, may be followed by P1, TH or TC55, may be followed by E2 or P2, may be followed by 139 to 145,RP4# or RP6#, followed by LD or LR, may be followed by 2 or 3, may be followed by A or F, may be followed by S or S2, followed by -M1J###,-M1GJ###, -M1JB###, -DGJ###, -DGJS###, -DHJS###-A, -DK1CJ###, -DK1EJ###, -DK1EJ2###, -M1TJ###, -M1TJB###, -M1TGJ###, -DTGJ###, -DTGJS###, -DTK1EJ###, K13, K15, K17, K41, K42, K43 or K51, may be followed by -Q, followed by -N, may be followed by optionalletter(s) and/or number(s). ($)

WL, may be followed by M, followed by RCA2-, CA2-##, CA-##, CA12-##, CL##-##, CAL##-##, RG2-, G2-##, G12-##, GL##-##, GAL##-##, RCA2-2, CA2-2##, CA-2##, CA12-2##, CL##-2##, CAL##-2##, RCA2-2N, CA2-2##N, CA-2##N, CA12-2##N, CL##-2##N or,CAL##-2##N, RGCA-, GCA2-##, GCA12-##, GCL##-##, GCAL##-##, RCA32-, CA32-###, D###-, D2###-, D3###-, SD###-, SD2###-,SD3###-, NJ-###, NJ-S### or GNJ-###, may be followed by P1, RP, RP7, RP8, RP9 or E10, may be followed by 55, may be followed by TH orTC, may be followed by E2 or P2, may be followed by 139 to 145, RP4# or RP6#, may be followed by A or F, may be followed by S or S2, followedby -AGJ### or -AK1EJ###, may be followed by -Q, followed by -N, may be followed by optional letter(s) and/or number(s).($)

WL, may be followed by M, followed by RCA2-, CA2-##, CA-##, CA12-##, CL##-##, CAL##-##, RG2-, G2-##, G12-##, GL##-##, GAL##-##, RCA2-2, CA2-2##, CA-2##, CA12-2##, CL##-2##, CAL##-2##, RCA2-2N, CA2-2##N, CA-2##N, CA12-2##N, CL##-2##N or,CAL##-2##N, RGCA-, GCA2-##, GCA12-##, GCL##-##, GCAL##-##, RCA32-, CA32-###, D###-, D2###-, D3###-, SD###-, SD2###-,SD3###-, NJ-###, NJ-S### or GNJ-###, may be followed by P1, RP, RP7, RP8, RP9 or E10, may be followed by 55, may be followed by TH orTC, may be followed by E2 or P2, may be followed by 139 to 145, RP4# or RP6#, may be followed by A or F, may be followed by S or S2, followedby -M1J###,-M1GJ###, -M1JB###, -DGJ###, -DGJS###, -DHJS###-A, -DK1CJ###, -DK1EJ###, -DK1EJ2###, -M1TJ###, -M1TJB###, -M1TGJ###, -DTGJ###, -DTGJS### or, -DTK1EJ###, K13, K15, K17, K41, K42, K43 or K51, may be followed by -Q, followed by -N, may befollowed by optional letter(s) and/or number(s). ($)

WL, may be followed by M, followed by RCA2-, CA2-##, CA-##, CA12-##, CL##-##, CAL##-##, RG2-, G2-##, G12-##, GL##-##, GAL##-##, RCA2-2, CA2-2##, CA-2##, CA12-2##, CL##-2##, CAL##-2##, RCA2-2N, CA2-2##N, CA-2##N, CA12-2##N, CL##-2##N or,CAL##-2##N, RGCA-, GCA2-##, GCA12-##, GCL##-##, GCAL##-##, RCA32-, CA32-###, D###-, D2###-, D3###-, SD###-, SD2###-,SD3###-, NJ-###, NJ-S### or GNJ-###, may be followed by P1, RP, RP7, RP8, RP9 or E10, may be followed by 55, may be followed by TH orTC, may be followed by E2 or P2, may be followed by RP60U, may be followed by G1, G, Y or TS, may be followed by A or F, may be followed by Sor S2, may be followed by -Q, followed by -N, may be followed by optional letter(s) and/or number(s). ($)

WL, may be followed by M, followed by RCA2-, CA2-##, CA-##, CA12-##, CL##-##, CAL##-##, RG2-, G2-##, G12-##, GL##-##, GAL##-##, RCA2-2, CA2-2##, CA-2##, CA12-2##, CL##-2##, CAL##-2##, RCA2-2N, CA2-2##N, CA-2##N, CA12-2##N, CL##-2##N or,CAL##-2##N, RGCA-, GCA2-##, GCA12-##, GCL##-##, GCAL##-##, RCA32-, CA32-###, D###-, D2###-, D3###-, SD###-, SD2###-,SD3###-, NJ-###, NJ-S### or GNJ-###, may be followed by P1, TH or TC55, may be followed by E2 or P2, may be followed by 139 to 145,RP4# or RP6#, followed by LD or LR, may be followed by 2 or 3, may be followed by A or F, may be followed by S or S2, followed by -AGJ### or-AK1EJ###, may be followed by -Q, followed by -N, may be followed by optional letter(s) and/or number(s). ($)

WL, may be followed by M, followed by RCA2-, CA2-##, CA-##, CA12-##, CL##-##, CAL##-##, RG2-, G2-##, G12-##, GL##-##, GAL##-##, RCA2-2, CA2-2##, CA-2##, CA12-2##, CL##-2##, CAL##-2##, RCA2-2N, CA2-2##N, CA-2##N, CA12-2##N, CL##-2##N or,CAL##-2##N, RGCA-, GCA2-##, GCA12-##, GCL##-##, GCAL##-##, RCA32-, CA32-###, D###-, D2###-, D3###-, SD###-, SD2###-,SD3###-, NJ-###, NJ-S### or GNJ-###, may be followed by P1, TH or TC55, may be followed by E2 or P2, may be followed by RP60U, may

5/25/2018 NKCR.E76675 - Auxiliary Devices

http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/showpage.html?name=NKCR.E76675&ccnshorttitle=Auxiliary+Devices&objid=1074106589&cfgid=107

be followed by G1, G, Y or TS, followed by LE, may be folowed by 2 or 3, may be followed by A or F, may be followed by S or S2, may be followedby -Q, followed by -N, may be followed by optional letter(s) and/or number(s). ($)

WL, may be followed by M, followed by RCA2-, CA2-##, CA-##, CA12-##, CL##-##, CAL##-##, RG2-, G2-##, G12-##, GL##-##, GAL##-##, RCA2-2, CA2-2##, CA-2##, CA12-2##, CL##-2##, CAL##-2##, RCA2-2N, CA2-2##N, CA-2##N, CA12-2##N, CL##-2##N,CAL##-2##N, RGCA-, GCA2-##, GCA12-##, GCL##-##, GCAL##-##, RCA32-, CA32-###, D###-, D2###-, D3###-, SD###-, SD2###-,SD3###-, NJ-###, NJ-S### or GNJ-###, may be followed 55, may be followed by E2 or P2, may be followed by 139 to 145, RP4# or RP6#,followed by LE, may be followed by 2 or 3, may be followed by A or F, may be followed by S or S2, followed by -AGJ### or -AK1EJ###, may befollowed by -Q, followed by -N, may be followed by optional letter(s) and/or number(s). ($)

WL, may be followed by R, followed by C, D, G, H, NJ, or SD, followed by a number, may be followed by LD, followed by GM, KGM or K-GM.*

WL, may be followed by R, may be followed by 01, may be followed by A or B, may be followed by M, followed by C#, D#, G#, H#, NJ#, or SD#where # is up to a ten-digit symbol of letter(s) and/or number(s), may be followed by E2, may be followed by RP, 10, or 31, may be followed byP1, may be followed by 55, may be followed by TC, TC2, TH, or T, may be followed by 13##, RP4##, RP5##, RP6##, or 14##, where ## is aone or two digit symbol of letter(s) and/or number(s), may be followed by G1, G, Y, TS, or C, may be followed by LE, LD, LDN, LR or R, may befollowed by 2 or 3, may be followed by A or F, may be followed by S, may be followed by DGJ###, DTGJ###, DK1CJ###, DK1EJ###,DTK1EJ###, M1J###, M1TJ###, M1GJ###, M1TGJ###, M5J###, DHJS###, AGJ###, AK1EJ####, AK1J###, AK4EJ### or K###, where### is up to a five digit symbol of letter(s) and/or number(s), may be followed by up to a five digit symbol of letter(s) and/or number(s).

ZE, ZV or ZV2, may be followed by -01 or Y, followed by N or Q, followed by six letters and/or numbers, may be followed by 2, may be followedby G, G1, S or Y, may be followed by TC or TH.*

Limit switches, actuator heads Model(s) D4A-0001N*, D4A-0002N*, D4A-0003N*, D4A-0004N*, D4A-0005N*, D4A-0006N*, D4A-0007HN*,D4A-0007VN*, D4A-0008N*, D4A-0009N*, D4A-0010N*, D4A-0011N*, D4A-0012N*, D4A-0014N*, D4A-0015N*, D4A-0016N*, D4A-0017N*,D4A-0018N*, D4A-0019N*, D4A-0020N*, D4A-0024N*

Limit switches, bodies Model(s) D4A-0000N*, D4A-0100N*, D4A-0300N*, D4A-0500N*, D4A-0700N*, D4A-0900N*, D4A-0E00N*

Limit switches, receptacles Model(s) D4A-1000*, D4A-1000N*, D4A-2000*, D4A-2000N*, D4A-3000*, D4A-3000N*, D4A-4000*, D4A-4000N*, D4A-5000*, D4A-5000N*, D4A-6000*, D4A-6000N*

Limit swtiches Model(s) WL, may be followed by M, followed by RCA2-, CA2-##, CA-##, CA12-##, CL##-##, CAL##-##, RG2-, G2-##, G12-##, GL##-##, GAL##-##, RCA2-2, CA2-2##, CA-2##, CA12-2##, CL##-2##, CAL##-2##, RCA2-2N, CA2-2##N, CA-2##N, CA12-2##N,CL##-2##N or, CAL##-2##N, RGCA-, GCA2-##, GCA12-##, GCL##-##, GCAL##-##, RCA32-, CA32-###, D###-, D2###-, D3###-,SD###-, SD2###-, SD3###-, NJ-###, NJ-S### or GNJ-###, may be followed by P1, TH or TC55, may be followed by E2 or P2, may befollowed by RP60U, may be followed by G1, G, Y or TS, followed by LD or LR, may be followed by 2 or 3, may be followed by A or F, may befollowed by S or S2, may be followed by -Q, followed by -N, may be followed by optional letter(s) and/or number(s). ($)

Magnetically actuated switches Model(s) D40B-1B10, D40B-1B3, D40B-1D10, D40B-1D3, D40B-2B10, D40B-2B3, D40B-2D10, D40B-2D3,D40B-3D5C, D40B-3E5C, D40B-A1, D40B-A2, D40B-A3, D40B-J1, D40B-J2, D40B-S1B10, D40B-S1B3, D40B-S1D10, D40B-S1D3, D40B-S2B10,D40B-S2B3, D40B-S2D10, D40B-S2D3, D40B-S3D5C, D40B-S3E5C

Non-contact door switches Model(s) D40A-1C, followed by 2, 5, or a three digit number, may be followed by -F.+

D40Z, followed by 1, followed by C, may be followed by 2 or 5, may be followed by S or A.*

Non-contact door switches, actuators only Model(s) D40A-A1

Non-contact door switches, sensors only Model(s) D40A-A1C2, D40A-A1C5

Pendant enable switches Model(s) A4EG-, followed by B or C, followed by 00, E1, E2, M2, P1 or P2, followed by 0, B, R, Y or G, followed by 0,followed by 1, 2 or 4, followed by 0 or 1, may be followed by SH, may be followed by up to six number(s) and/or letter(s) except for A.

Pilot Light Model(s) Series M22N, followed by BN, BP, BG or BC, followed by TR, TG, TY, TW, TA, Or TO, followed by A, followed by R, G, Y, W, A,or O, followed by A, B, C, D, or E, followed by P or blank

Pilot Lights Model(s) Series M30N, followed by MN, MP, MG, or MC, followed by TR, TG, TY, TW, TA, Or TO, followed by A, followed by R, G, Y,W, A, or O, followed by A, B, C, D, or E, followed by P or blank.

Pushbutton Switch Model(s) Series A22N, followed by N, followed by BN, BP, BG, BM, MN, MP, MG, MM, RN, RP, or RM, followed by A or M,followed by NR, NG, NY, NW, NA, NB, UR, UG, UY, UW, UA or UO, followed by A, followed by G or P, followed by 0,1,2,A,B or C, followed by0,1,2,A,B or C, followed by 0,1,2,A,B or C, followed by N, followed by N.

Pushbuttons Switches Model(s) Series A30N, followed by N, followed by MN, MP, MG, or MM, followed by A or M, followed by NR, NG, NY, NW,NA, NB, UR, UG, UY, UW, UA or UO, followed by A, followed by G or P, followed by 0,1,2,A,B or C, followed by 0,1,2,A,B or C, followed by0,1,2,A,B or C, followed by N, followed by N.

Selector Switches Model(s) Series A22N, followed by S, followed by 2B, 2M, 2R, 3B, 3M, or 3R, followed by M, L, R, or B, followed by NR, NG,NY, NW, NA, or NB, followed by A, followed by G or P, followed by 0,1,2,A,B or C, followed by 0,1,2,A,B or C, followed by 0,1,2,A,B or C, followedby N, followed by N.

Series A30N, followed by S, followed by 2M or 3M, followed by M, L, R, or B, followed by NR, NG, NY, NW, NA, or NB, followed by A, followed by Gor P, followed by 0,1,2,A,B or C, followed by 0,1,2,A,B or C, followed by 0,1,2,A,B or C, followed by N, followed by N.

Switch Contact Block Model(s) Series A22N followed by Z, followed by S, followed by G or P, followed by 1 or 2, followed by A,B or C, followedby blank or N.

Terminal relays Model(s) F3SP-T01

($) - ##: w/wo Maximum 2 digits number(s), ###: w/wo Maximum 3 digits number(s)

* - May be followed by additional number(s) and/or letter(s).

+ - Additional functional safety investigation was completed to UL 991 and IEC 60947-5-3.

Last Updated on 2017-08-04

5/25/2018 NKCR7.E76675 - Auxiliary Devices Certified for Canada

http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/showpage.html?name=NKCR7.E76675&ccnshorttitle=Auxiliary+Devices+Certified+for+Canada&objid=

NKCR7.E76675 Auxiliary Devices Certified for Canada

If you notice a change to your NKCR7 Listing Card, click here to learn more.

Page Bottom

Auxiliary Devices Certified for Canada See General Information for Auxiliary Devices Certified for Canada OMRON CORP E76675SAFETY STANDARDS GROUPIAB GLOBAL QUALITY CENTERSHIOKOJI HORIKAWASHIMOGYO-KU, KYOTO 600-8530 JAPAN

Investigated to CAN/CSA C22.2 No. 14-13

Emergency Stop Pushbutton Switches Model(s) Series A22NE, followed by -S, -M or -L, may be followed by P, may be followed by RC, RO, RSor TN, followed by -P, followed by 0, 1, 2, A, B or C, followed by 0, 1, 2, A, B or C, followed by 0, 1, 2, A, B or C, followed by -N, -A, -B, -C, -D or-E, may be followed by -B, -S or -SB.

Auxilary Device Enclosed Key-type Selector Switch Model(s) A22LK, followed by 2RLA or 2RLB,followed by 22,13,or 04,may be followed byK, followed by 01, may be followed by up to 10 letters and/or numbers.

Auxilary Device Open type Model(s) G9SE Series followed by 2, 4, followed by 0, 2, followed by 1, followed by blank, T05, or T30.

Illuminated Pushbutton Switches Model(s) Series A22N, followed by L, followed by BN, BP, BG, BM, MN, MP, MG, MM, RN, RP, or RM, followedby A or M, followed by TR, TG, TY, TW, TA, or TO, followed by A, followed by G or P, followed by 0,1,2,A,B,or C, followed by 0, followed by0,1,2,A,B,or C, followed by R, G, Y, W, A, or O, followed by A, B, C, D, or E.

Illuminated Pushbuttons Switches Model(s) Series A30N, followed by L, followed by MN, MP, MG, or MM, followed by A or M, followed by TR,TG, TY, TW, TA, or TO, followed by A, followed by G or P, followed by 0,1,2,A,B,or C, followed by 0, followed by 0,1,2,A,B,or C, followed by R, G,Y, W, A, or O, followed by A, B, C, D, or E.

Illuminated Selector Switches Model(s) Series A22N, followed by W, followed by 2B, 2M, 2R, 3B, 3M, or 3R, followed by M, L, R, or B, followedby TR, TG, TY, TW, TA, or TO, followed by A, followed by G or P, followed by 0,1,2,A,B,or C, followed by 0, followed by 0,1,2,A,B,or C, followed byR, G, Y, W, A, or O, followed by A, B, C, D, or E.

Series A30N, followed by W, followed by 2M or 3M, followed by M, L, R, or B, followed by TR, TG, TY, TW, TA, or TO, followed by A, followed by Gor P, followed by 0,1,2,A,B,or C, followed by 0, followed by 0,1,2,A,B,or C, followed by R, G, Y, W, A, or O, followed by A, B, C, D, or E.

Key Selector Switches Model(s) Series A22N, followed by K, followed 2B, 2M, 2R, 3B, 3M, or 3R, followed by M, L, R, or B, followed by 01,followed by A, B, C, D, E, F, or G, followed by A, followed by G or P, followed by 0,1,2,A,B or C, followed by 0,1,2,A,B or C, followed by 0,1,2,A,Bor C.

Series A30N, followed by K, followed 2M or 3M, followed by M, L, R, or B, followed by 01, 02, 03, 04, 05, or 06, followed by A, B, C, D, E, F, or G,followed by A, followed by G or P, followed by 0,1,2,A,B or C, followed by 0,1,2,A,B or C, followed by 0,1,2,A,B or C.

Lamp Block Model(s) Series A22N, followed by Z, followed by T, followed by A, B, C, D, or E follow by P or blank, followed by blank or N.

Limit switches Model(s) WL, may be followed by M, followed by RCA2-, CA2-##, CA-##, CA12-##, CL##-##, CAL##-##, RG2-, G2-##, G12-##, GL##-##, GAL##-##, RCA2-2, CA2-2##, CA-2##, CA12-2##, CL##-2##, CAL##-2##, RCA2-2N, CA2-2##N, CA-2##N, CA12-2##N,CL##-2##N or CAL##-2##N, RGCA-, GCA2-##, GCA12-##, GCL##-##, GCAL##-##, RCA32-, CA32-###, D###-, D2###-, D3###-,SD###-, SD2###-, SD3###-, NJ-###, NJ-S### or GNJ-###, may be followed by P1, TH or TC55, may be followed by E2 or P2, may befollowed by 139 to 145, RP4# or RP6#, followed by LD or LR, may be followed by 2 or 3, may be followed by A or F, may be followed by S or S2,followed by -M1J###,-M1GJ###, -M1JB###, -DGJ###, -DGJS###, -DHJS###-A, -DK1CJ###, -DK1EJ###, -DK1EJ2###, -M1TJ###, -M1TJB###, -M1TGJ###, -DTGJ###, -DTGJS###, -DTK1EJ###, K13, K15, K17, K41, K42, K43 or K51, may be followed by -Q, followed by -N,may be followed by optional letter(s) and/or number(s). ($)

WL, may be followed by M, followed by RCA2-, CA2-##, CA-##, CA12-##, CL##-##, CAL##-##, RG2-, G2-##, G12-##, GL##-##, GAL##-##, RCA2-2, CA2-2##, CA-2##, CA12-2##, CL##-2##, CAL##-2##, RCA2-2N, CA2-2##N, CA-2##N, CA12-2##N, CL##-2##N or,CAL##-2##N, RGCA-, GCA2-##, GCA12-##, GCL##-##, GCAL##-##, RCA32-, CA32-###, D###-, D2###-, D3###-, SD###-, SD2###-,SD3###-, NJ-###, NJ-S### or GNJ-###, may be followed by P1, RP, RP7, RP8, RP9 or E10, may be followed by 55, may be followed by TH or

5/25/2018 NKCR7.E76675 - Auxiliary Devices Certified for Canada

http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/showpage.html?name=NKCR7.E76675&ccnshorttitle=Auxiliary+Devices+Certified+for+Canada&objid=

TC, may be followed by E2 or P2, may be followed by 139 to 145, RP4# or RP6#, may be followed by A or F, may be followed by S or S2, followedby -AGJ### or -AK1EJ###, may be followed by -Q, followed by -N, may be followed by optional letter(s) and/or number(s).($)

WL, may be followed by M, followed by RCA2-, CA2-##, CA-##, CA12-##, CL##-##, CAL##-##, RG2-, G2-##, G12-##, GL##-##, GAL##-##, RCA2-2, CA2-2##, CA-2##, CA12-2##, CL##-2##, CAL##-2##, RCA2-2N, CA2-2##N, CA-2##N, CA12-2##N, CL##-2##N or,CAL##-2##N, RGCA-, GCA2-##, GCA12-##, GCL##-##, GCAL##-##, RCA32-, CA32-###, D###-, D2###-, D3###-, SD###-, SD2###-,SD3###-, NJ-###, NJ-S### or GNJ-###, may be followed by P1, RP, RP7, RP8, RP9 or E10, may be followed by 55, may be followed by TH orTC, may be followed by E2 or P2, may be followed by 139 to 145, RP4# or RP6#, may be followed by A or F, may be followed by S or S2, followedby -M1J###,-M1GJ###, -M1JB###, -DGJ###, -DGJS###, -DHJS###-A, -DK1CJ###, -DK1EJ###, -DK1EJ2###, -M1TJ###, -M1TJB###, -M1TGJ###, -DTGJ###, -DTGJS### or, -DTK1EJ###, K13, K15, K17, K41, K42, K43 or K51, may be followed by -Q, followed by -N, may befollowed by optional letter(s) and/or number(s). ($)

WL, may be followed by M, followed by RCA2-, CA2-##, CA-##, CA12-##, CL##-##, CAL##-##, RG2-, G2-##, G12-##, GL##-##, GAL##-##, RCA2-2, CA2-2##, CA-2##, CA12-2##, CL##-2##, CAL##-2##, RCA2-2N, CA2-2##N, CA-2##N, CA12-2##N, CL##-2##N or,CAL##-2##N, RGCA-, GCA2-##, GCA12-##, GCL##-##, GCAL##-##, RCA32-, CA32-###, D###-, D2###-, D3###-, SD###-, SD2###-,SD3###-, NJ-###, NJ-S### or GNJ-###, may be followed by P1, RP, RP7, RP8, RP9 or E10, may be followed by 55, may be followed by TH orTC, may be followed by E2 or P2, may be followed by RP60U, may be followed by G1, G, Y or TS, may be followed by A or F, may be followed by Sor S2, may be followed by -Q, followed by -N, may be followed by optional letter(s) and/or number(s). ($)

WL, may be followed by M, followed by RCA2-, CA2-##, CA-##, CA12-##, CL##-##, CAL##-##, RG2-, G2-##, G12-##, GL##-##, GAL##-##, RCA2-2, CA2-2##, CA-2##, CA12-2##, CL##-2##, CAL##-2##, RCA2-2N, CA2-2##N, CA-2##N, CA12-2##N, CL##-2##N or,CAL##-2##N, RGCA-, GCA2-##, GCA12-##, GCL##-##, GCAL##-##, RCA32-, CA32-###, D###-, D2###-, D3###-, SD###-, SD2###-,SD3###-, NJ-###, NJ-S### or GNJ-###, may be followed by P1, TH or TC55, may be followed by E2 or P2, may be followed by 139 to 145,RP4# or RP6#, followed by LD or LR, may be followed by 2 or 3, may be followed by A or F, may be followed by S or S2, followed by -AGJ### or-AK1EJ###, may be followed by -Q, followed by -N, may be followed by optional letter(s) and/or number(s). ($)

WL, may be followed by M, followed by RCA2-, CA2-##, CA-##, CA12-##, CL##-##, CAL##-##, RG2-, G2-##, G12-##, GL##-##, GAL##-##, RCA2-2, CA2-2##, CA-2##, CA12-2##, CL##-2##, CAL##-2##, RCA2-2N, CA2-2##N, CA-2##N, CA12-2##N, CL##-2##N or,CAL##-2##N, RGCA-, GCA2-##, GCA12-##, GCL##-##, GCAL##-##, RCA32-, CA32-###, D###-, D2###-, D3###-, SD###-, SD2###-,SD3###-, NJ-###, NJ-S### or GNJ-###, may be followed by P1, TH or TC55, may be followed by E2 or P2, may be followed by RP60U, maybe followed by G1, G, Y or TS, followed by LE, may be folowed by 2 or 3, may be followed by A or F, may be followed by S or S2, may be followedby -Q, followed by -N, may be followed by optional letter(s) and/or number(s). ($)

WL, may be followed by M, followed by RCA2-, CA2-##, CA-##, CA12-##, CL##-##, CAL##-##, RG2-, G2-##, G12-##, GL##-##, GAL##-##, RCA2-2, CA2-2##, CA-2##, CA12-2##, CL##-2##, CAL##-2##, RCA2-2N, CA2-2##N, CA-2##N, CA12-2##N, CL##-2##N,CAL##-2##N, RGCA-, GCA2-##, GCA12-##, GCL##-##, GCAL##-##, RCA32-, CA32-###, D###-, D2###-, D3###-, SD###-, SD2###-,SD3###-, NJ-###, NJ-S### or GNJ-###, may be followed 55, may be followed by E2 or P2, may be followed by 139 to 145, RP4# or RP6#,followed by LE, may be followed by 2 or 3, may be followed by A or F, may be followed by S or S2, followed by -AGJ### or -AK1EJ###, may befollowed by -Q, followed by -N, may be followed by optional letter(s) and/or number(s). ($)

Limit swtiches Model(s) WL, may be followed by M, followed by RCA2-, CA2-##, CA-##, CA12-##, CL##-##, CAL##-##, RG2-, G2-##, G12-##, GL##-##, GAL##-##, RCA2-2, CA2-2##, CA-2##, CA12-2##, CL##-2##, CAL##-2##, RCA2-2N, CA2-2##N, CA-2##N, CA12-2##N,CL##-2##N or, CAL##-2##N, RGCA-, GCA2-##, GCA12-##, GCL##-##, GCAL##-##, RCA32-, CA32-###, D###-, D2###-, D3###-,SD###-, SD2###-, SD3###-, NJ-###, NJ-S### or GNJ-###, may be followed by P1, TH or TC55, may be followed by E2 or P2, may befollowed by RP60U, may be followed by G1, G, Y or TS, followed by LD or LR, may be followed by 2 or 3, may be followed by A or F, may befollowed by S or S2, may be followed by -Q, followed by -N, may be followed by optional letter(s) and/or number(s). ($)

Pilot Light Model(s) Series M22N, followed by BN, BP, BG or BC, followed by TR, TG, TY, TW, TA, Or TO, followed by A, followed by R, G, Y, W, A,or O, followed by A, B, C, D, or E, followed by P or blank

Pilot Lights Model(s) Series M30N, followed by MN, MP, MG, or MC, followed by TR, TG, TY, TW, TA, Or TO, followed by A, followed by R, G, Y,W, A, or O, followed by A, B, C, D, or E, followed by P or blank.

Pushbutton Switch Model(s) Series A22N, followed by N, followed by BN, BP, BG, BM, MN, MP, MG, MM, RN, RP, or RM, followed by A or M,followed by NR, NG, NY, NW, NA, NB, UR, UG, UY, UW, UA or UO, followed by A, followed by G or P, followed by 0,1,2,A,B or C, followed by0,1,2,A,B or C, followed by 0,1,2,A,B or C, followed by N, followed by N.

Pushbuttons Switches Model(s) Series A30N, followed by N, followed by MN, MP, MG, or MM, followed by A or M, followed by NR, NG, NY, NW,NA, NB, UR, UG, UY, UW, UA or UO, followed by A, followed by G or P, followed by 0,1,2,A,B or C, followed by 0,1,2,A,B or C, followed by0,1,2,A,B or C, followed by N, followed by N.

Selector Switches Model(s) Series A22N, followed by S, followed by 2B, 2M, 2R, 3B, 3M, or 3R, followed by M, L, R, or B, followed by NR, NG,NY, NW, NA, or NB, followed by A, followed by G or P, followed by 0,1,2,A,B or C, followed by 0,1,2,A,B or C, followed by 0,1,2,A,B or C, followedby N, followed by N.

Series A30N, followed by S, followed by 2M or 3M, followed by M, L, R, or B, followed by NR, NG, NY, NW, NA, or NB, followed by A, followed by Gor P, followed by 0,1,2,A,B or C, followed by 0,1,2,A,B or C, followed by 0,1,2,A,B or C, followed by N, followed by N.

Switch Contact Block Model(s) Series A22N followed by Z, followed by S, followed by G or P, followed by 1 or 2, followed by A,B or C, followedby blank or N.

Investigated to CAN/CSA C22.2. No. 14-10

Auxilary Device Enclosed Model(s) Switches, type D4SL-N; followed by 1, 2, 3 or 4; followed by A, B, C, D, E, F, G, H, J, K, L, M, N, P, Q or R;followed by F or D; followed by A or G; may be followed by C or D; may be followed by 4; followed by C; followed by 1, 3 or 5 may be followed byadditional letter(s) and/or number(s).

Door lock switches Model(s) D4GL, followed by 1, 2, 3 or 4, followed by A thru H or J thru M, followed by B, F, L, R, D, E, G or H, followed by A,G or N, may be followed by A, B or C, may be followed by 4, may be followed by N.*

Door switches Model(s) D4BL Series, followed by 1, 2, 3 or 4, followed by C, D, E or F, followed by A, B C, D, E, F or G, followed by blank, A, B,C, D, E or F, followed by blank, 12-30 or T, followed by blank or up to six letters and/or numbers.

D4BS-11BSF1*, D4BS-11FSF1*, D4BS-11LSF1*, D4BS-11RSF1*

5/25/2018 NKCR7.E76675 - Auxiliary Devices Certified for Canada

http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/showpage.html?name=NKCR7.E76675&ccnshorttitle=Auxiliary+Devices+Certified+for+Canada&objid=

D4GS-N, followed by 1, 2, 3 or 4, followed by R or T, may be followed by 3, 5 or up to two letter and/or numbers, may be followed by up to sixletters and/or numbers.

D4JL, followed by 1, 2, 3 or 4, followed by A thru H, J thru N or P thru R, followed by D or F, followed by A or G, followed by C or D, followed by 5,6, 7, or 8, followed by blank, followed by blank, Y or Z, may be followed by four alphanumeric code, may be followed by six digit maximumalphanumeric code.

D4N 9120GP

D4N, may be followed by A or H, followed by 1 thru 9 or A, B or C, followed by 1, 2 or A thru G, followed by 20, 21, 21-TK, 22 thru 29, 2B, 2C,2D, 2G, 2H, 2J, 2L, 31, 32, 34, 62, 63, 72, 80, 87, RE, LE, AS, BC or AS1, may be followed by R.*

D4NL, followed by 1, 2, 3 or 4, followed by A thru H, J thru N, P or Q, followed by B, D, E, F, G, L or R, followed by A, B, C, D, E, F, G, H, J, K or L,may be followed by A thru F, may be followed by 4, may be followed by S, may be followed by Z.*

D4NS, followed by 1 thru 9 or A, B or C, followed by A thru F, followed by B, D, E, F, G, H, L or R.*

Hand mixers Model(s) KJ-805

Limit switches Model(s) D4A, followed by 3, may be followed by E, followed by 01-06, 07-V, 07-H, 08-12, 14-20 or 24, may be followed by N,followed by GM or KGM.*

D4B, followed by -1, -2, -3, -4, -5, -6, -7 or -8, followed by 1, 2, 3, 4, 5, 6, 7, 8, A, B, C or D, followed by 1 thru 8 or 00, may be followed by upto two numbers or letters, followed by N, may be followed by LD or LE.*

D4B-F, followed by 1, 2, 3 or 4, followed by 1, 2 or 3, followed by 11, 15, 1F or 1R, followed by F, may be followed by 1.*

D4BS, followed by -1, -2, -3, -4, -5, -6, -7 or -8, followed by 5, 6, 7, 8, A or B, followed by F, R, L or B, followed by S, may be followed by LD orLE.*

D4C, followed by 10, 20, 30, A0, C0 or D0, followed by a two digit number, followed by DRAJ01 or ARAJ01.*

D4C-1*, D4C-2*, D4C-3*, D4C-4*, D4C-5*, D4C-6*, D4CC-1*, D4CC-2*, D4CC-3*, D4CC-4*, D4CC-5*, D4CC-6*

D4F, followed by 1 thru 5, followed by 0 or 2, followed by 0, 2, 3, G or H, followed by a number, followed by R, L or D.*

SHL, followed by D, Q or W, with or without 1 or 2 digit number, followed by 55, followed by blank, followed by blank, L, L6 or L7, followed byblank, MD, ML or MR, followed by blank, 2 or 3, followed by blank, TC or TH, followed by blank or 11, followed by blank or T, followed by blank orup to six additional letters and/or numbers.

WL, may be followed by R, followed by C, D, G, H, NJ, or SD, followed by a number, may be followed by LD, followed by GM, KGM or K-GM.*

WL, may be followed by R, may be followed by 01, may be followed by A or B, may be followed by M, followed by C#, D#, G#, H#, NJ#, or SD#where # is up to a ten-digit symbol of letter(s) and/or number(s), may be followed by E2, may be followed by RP, 10, or 31, may be followed byP1, may be followed by 55, may be followed by TC, TC2, TH, or T, may be followed by 13##, RP4##, RP5##, RP6##, or 14##, where ## is aone or two digit symbol of letter(s) and/or number(s), may be followed by G1, G, Y, TS, or C, may be followed by LE, LD, LDN, LR or R, may befollowed by 2 or 3, may be followed by A or F, may be followed by S, may be followed by DGJ###, DTGJ###, DK1CJ###, DK1EJ###,DTK1EJ###, M1J###, M1TJ###, M1GJ###, M1TGJ###, M5J###, DHJS###, AGJ###, AK1EJ####, AK1J###, AK4EJ### or K###, where### is up to a five digit symbol of letter(s) and/or number(s), may be followed by up to a five digit symbol of letter(s) and/or number(s).

ZE, ZV or ZV2, may be followed by -01 or Y, followed by N or Q, followed by six letters and/or numbers, may be followed by 2, may be followedby G, G1, S or Y, may be followed by TC or TH.*

Limit switches, actuator heads Model(s) D4A-0001N*, D4A-0002N*, D4A-0003N*, D4A-0004N*, D4A-0005N*, D4A-0006N*, D4A-0007HN*,D4A-0007VN*, D4A-0008N*, D4A-0009N*, D4A-0010N*, D4A-0011N*, D4A-0012N*, D4A-0014N*, D4A-0015N*, D4A-0016N*, D4A-0017N*,D4A-0018N*, D4A-0019N*, D4A-0020N*, D4A-0024N*

Limit switches, bodies Model(s) D4A-0000N*, D4A-0100N*, D4A-0300N*, D4A-0500N*, D4A-0700N*, D4A-0900N*, D4A-0E00N*

Limit switches, receptacles Model(s) D4A-1000*, D4A-1000N*, D4A-2000*, D4A-2000N*, D4A-3000*, D4A-3000N*, D4A-4000*, D4A-4000N*, D4A-5000*, D4A-5000N*, D4A-6000*, D4A-6000N*

Magnetically actuated switches Model(s) D40B-1B10, D40B-1B3, D40B-1D10, D40B-1D3, D40B-2B10, D40B-2B3, D40B-2D10, D40B-2D3,D40B-3D5C, D40B-3E5C, D40B-A1, D40B-A2, D40B-A3, D40B-J1, D40B-J2, D40B-S1B10, D40B-S1B3, D40B-S1D10, D40B-S1D3, D40B-S2B10,D40B-S2B3, D40B-S2D10, D40B-S2D3, D40B-S3D5C, D40B-S3E5C

Non-contact door switches Model(s) D40A-1C, followed by 2, 5, or a three digit number, may be followed by -F.+

D40Z, followed by 1, followed by C, may be followed by 2 or 5, may be followed by S or A.*

Non-contact door switches, actuators only Model(s) D40A-A1

Non-contact door switches, sensors only Model(s) D40A-A1C2, D40A-A1C5

Pendant enable switches Model(s) A4EG-, followed by B or C, followed by 00, E1, E2, M2, P1 or P2, followed by 0, B, R, Y or G, followed by 0,followed by 1, 2 or 4, followed by 0 or 1, may be followed by SH, may be followed by up to six number(s) and/or letter(s) except for A.

Terminal relays Model(s) F3SP-T01

($) - ##: w/wo Maximum 2 digits number(s), ###: w/wo Maximum 3 digits number(s)

* - May be followed by additional number(s) and/or letter(s).

+ - Additional functional safety investigation was completed to UL 991 and IEC 60947-5-3.

Here are the links to the following OSTI UL Files: NKCR2.E76675 - Auxiliary Devices NKCR8.E76675 - Auxiliary Devices Certified for Canada Put the cursor on the link (underlined & highlighted in blue), press Ctrl, then Click. This will bring you to UL’s Online Directory for that UL File Company Name Category Name Link to File

OMRON CORP Auxiliary Devices - Component NKCR2.E76675

OMRON CORP

Auxiliary Devices Certified for Canada - Component NKCR8.E76675

Here are the links to the following OSTI UL Files: NKCR.E76675 - Auxiliary Devices NKCR7.E76675 - Auxiliary Devices Certified for Canada Put the cursor on the link (underlined & highlighted in blue), press Ctrl, then Click. This will bring you to UL’s Online Directory for that UL File Company Name Category Name Link to File

OMRON CORP Auxiliary Devices NKCR.E76675

OMRON CORP Auxiliary Devices Certified for Canada NKCR7.E76675

OMRON CANADA, INC. • HEAD OFFICEToronto, ON, Canada • 416.286.6465 • 866.986.6766 • www.omron247.com

OMRON ELECTRONICS DE MEXICO • HEAD OFFICEMéxico DF • 52.55.59.01.43.00 • 01-800-226-6766 • mela@omron.com

OMRON ELECTRONICS DE MEXICO • SALES OFFICEApodaca, N.L. • 52.81.11.56.99.20 • 01-800-226-6766 • mela@omron.com

OMRON ELETRÔNICA DO BRASIL LTDA • HEAD OFFICESão Paulo, SP, Brasil • 55.11.2101.6300 • www.omron.com.br

OMRON ARGENTINA • SALES OFFICECono Sur • 54.11.4783.5300

OMRON CHILE • SALES OFFICESantiago • 56.9.9917.3920

OTHER OMRON LATIN AMERICA SALES54.11.4783.5300

Authorized Distributor:

J89I-E-01 11/14 Note: Specifications are subject to change. © 2014 Omron Electronics LLC Printed in U.S.A.

Printed on recycled paper.

Automation Control Systems• Machine Automation Controllers (MAC) • Programmable Controllers (PLC) • Operator interfaces (HMI) • Distributed I/O • Software

Drives & Motion Controls • Servo & AC Drives • Motion Controllers & Encoders

Temperature & Process Controllers • Single and Multi-loop Controllers

Sensors & Vision• Proximity Sensors • Photoelectric Sensors • Fiber-Optic Sensors• Amplified Photomicrosensors • Measurement Sensors• Ultrasonic Sensors • Vision Sensors

Industrial Components • RFID/Code Readers • Relays • Pushbuttons & Indicators• Limit and Basic Switches • Timers • Counters • Metering Devices • Power Supplies

Safety • Laser Scanners • Safety Mats • Edges and Bumpers • Programmable Safety Controllers • Light Curtains • Safety Relays • Safety Interlock Switches

OMRON AUTOMATION AND SAFETY • THE AMERICAS HEADQUARTERS • Chicago, IL USA • 847.843.7900 • 800.556.6766 • www.omron247.com

OMRON EUROPE B.V. • Wegalaan 67-69, NL-2132 JD, Hoofddorp, The Netherlands. • +31 (0) 23 568 13 00 • www.industrial.omron.eu