The Philips Hadco Story

The CS Series is built to last constructed of a heavy gauge spun aluminum shade and a cast aluminum adaptor which is equipped for several mounting options. Mix the shade cap for different contemporary styles with three distinct designs, round, flat or pointed. Five different optical packages are available making this luminaire perfect for pedestrian areas, walkways, building entrances, parking lots, shopping malls and landscape areas. Clear or opal polycarbonate lenses are available to further enhance your architectural design requirements.

The Philips Hadco Story

Philips Hadcos New RX1 LEDGINE is an excellent solution for LED Roadway and Street Lighting. The RX1 LEDGINE maximizes energy savings and provides uniform and comfortable white light. The low copper, die cast aluminum housing has a traditional cobra-head style and low profile with wide angular fins that allow for the natural removal of dirt and debris. The design and performance work in several applications including city centers, downtown streetscapes, major and minor roads. The RX140, RX164, and the RX180 are a great solution for replacing a variety of HID sources.

The Philips Hadco Story

The new Philips Hadco UX1 decorative post top is an excellent solution for LED outdoor lighting. The UX1 uses the Philips LEDGINE platform which maximizes energy savings and provides uniform and comfortable white light. The low copper, die cast aluminum housing has a modern design with traditional features and benefits. The design and performance work in several applications including residential streets, city streets, campuses, parking lots and retail centers. The UX1 is a great solution for new installations or replacing a variety of HID sources.

(Click the above product for specs)

Additional Information

Specification SheetInstruction SheetsInstruction Sheet_32001460Line ArtLine ArtProduct ShotsProduct Shot

Specifications HOUSING: Die-cast aluminum. Stem is extruded aluminum. Roof has dual stainless steel hinge with stainless steel spring-lock for tool-less entry and relamping. " NPS male threads to screw onto accessory mounting stake or junction box, sold separately.

FINISH: Thermoset polyester powdercoat is electrostatically applied after a five-stage conversion cleaning process and bonded by heat fusion thermosetting. Laboratory tested for superior weatherability and fade resistance in accordance with ASTM B-117-64 and ANSI/ASTM G53-77 specifications.

LAMPING: Philips Lumiled Rebel, Cool White (6,000K) Lamp is included with fixture.

ELECTRICAL ASSEMBLY: OptoElectronix electronic LED driver. UL Class 2 -10C to 50C mimum starting temperature. Internal surge protector built into LED driver circuit Input voltage range (VAC): 10.8 - 17.0. 6.5 total watts consumed. Connects directly to 12V AC or 12V DC power source. Low voltage transformer must be ordered to power the fixtures. 12 Volt fixture is pre-wired with 3-ft pigtail of 18-2 AWG, 105 C, SPT-1W wire. Low voltage quick connector, catalog #LVC3 included for easy hook-up to the low voltage supply cable, not included. 12 Volt system requires remote transformer, not included.

WARRANTY: Three-year limited warranty.

CERTIFICATIONS: ETL listed to U.S. safety standards for wet locations. cETL listed to Canadian safety standards for wet locations. Manufactured to ISO 9001:2008 Standards.

IP RATING: IP66: Dust-tight and sealed against direct jets of water.

Height : 20 3/8" (518mm)

Width: 7 1/4" (183mm)

Max. Weight: 2.2 lb.

Ordering Guide Example: AL4D3 A Product Code AL4D3LED Pathlyte

Finish ABlack

HBronze

GVerde

Additional Information

Specification SheetInstruction SheetsInstruction Sheet_32001460Line ArtLine ArtProduct ShotsProduct Shot

Specifications HOUSING: Die-cast aluminum. Stem is extruded aluminum. Roof has dual stainless steel hinge with stainless steel spring-lock for tool-less entry and relamping. " NPS male threads to screw onto accessory mounting stake or junction box, sold separately.

FINISH: Thermoset polyester powdercoat is electrostatically applied after a five-stage conversion cleaning process and bonded by heat fusion thermosetting. Laboratory tested for superior weatherability and fade resistance in accordance with ASTM B-117-64 and ANSI/ASTM G53-77 specifications.

LAMPING: Philips Lumiled Rebel, Cool White (6,000K) Lamp is included with fixture.

ELECTRICAL ASSEMBLY: OptoElectronix electronic LED driver. UL Class 2 -10C to 50C mimum starting temperature. Internal surge protector built into LED driver circuit Input voltage range (VAC): 10.8 - 17.0. 6.5 total watts consumed. Connects directly to 12V AC or 12V DC power source. Low voltage transformer must be ordered to power the fixtures. 12 Volt fixture is pre-wired with 3-ft pigtail of 18-2 AWG, 105 C, SPT-1W wire. Low voltage quick connector, catalog #LVC3 included for easy hook-up to the low voltage supply cable, not included. 12 Volt system requires remote transformer, not included.

WARRANTY: Three-year limited warranty.

CERTIFICATIONS: ETL listed to U.S. safety standards for wet locations. cETL listed to Canadian safety standards for wet locations. Manufactured to ISO 9001:2008 Standards.

IP RATING: IP66: Dust-tight and sealed against direct jets of water.

Height : 20 3/8" (518mm)

Width: 7 1/4" (183mm)

Max. Weight: 2.2 lb.

Ordering Guide Example: AL4D3 A Product Code AL4D3LED Pathlyte

Finish ABlack

HBronze

GVerde