OverviewAir distribution & fire safety products

Skinnskatteberg, Sweden: Group Head office, distribution center & largest production facility with one of Europe’s most ad-vanced R&D-centers. Frico’s central warehouse is also located here.

Windischbuch, Germany: Production of fans & modular air handling units, engineered products (e.g. tunnel and jet fans). Distribution center.

Langenfeld, Germany: Production of air curtains.

Mülheim an der Ruhr, Germany:Menerga a leading European producer of AHU’s for swimming pool halls and comfort ventilation.

Hässleholm, Sweden: VEAB a leading European manufacturer of elec-tric duct heaters, coils, electric and water based.

Ukmerge, Lithuania:Production of smaller air handling units with energy recovery systems.

Maribor, Slovenia: Specialized in centrifugal smoke extract fans, EN certified.

Hasselager, Denmark: Production of modular air handling units.

Dal, Eidsvoll, Norway: Production of air handling units Bratislava, Slovakia: Manufactures air distribution products and EN certified fire and smoke dampers.

Madrid, Spain: Production of air handling units

Milan, Italy: Manufactures a wide range of air conditioner.

Waalwijk, Netherlands:Holland Heating a leading manufacturer of air handling units.

Tillières-sur-Avre, France: Production of air conditioning products.

Istanbul, Turkey:Systemair-HSK is Turkey‘s leading manufacturer of air handling units.

Bouctouche, Canada: Production of air handling units and inline fans for commercial and residential applications.

Tillsonburg, Canada: Manufacture school classroom ventilation equipment for the American market.

Kansas City, USA: Production of fans for the US market.

Sao Paulo, Brazil:Production of air handling units.

Johannesburg, South Africa:Production of axial fans.

Kuala Lumpur, Malaysia :Production of Tunnel and garage ventilation products

Hyderabad, India: Production of air distribution products, fans & air handling units.

Greater Noida (Near New Delhi), India: Production of axial and box fans, air distribution products & air handling units.

Wujiang, China:Production of air handling units for the Asian market.

Systemair A Worldwide Partner

Fresh air is essential for people to feel good and to increase the life of your computers and machines. By investing in an energy efficient ventilation system from Systemair you get a healthy indoor environment while reducing your operating costs. Additionally, it prepares you for future environmental requirements and thus increases the value of your property. In other words, pure profit.

Systemair provides professional ventilation solutions for all types

of buildings, from single-family and multi-family buildings to

shopping centers, hospitals and industrial facilities. We adapt the

solution to your particular type of business. Regardless if it is a new

construction or a retrofit project, our products are second to none in

quality, reliability and length of service life. You can always trust that

Systemair delivers energy efficient ventilation solutions for health,

comfort and success.

Fresh air is pure profit.

Systemair India

Certifications • Axial fans certified as per AMCA international. • BSI certificate of constancy of performance, EN12101-3: 2015 for Axial fans & AJR Jet Fans tested to 300oC/2hrs. • Follows ETL testing lab U.S.A for performance testing of air distribution products like grilles & diffusers. • Combination fire & smoke dampers certified & listed as UL555 for 90 min fire rating & UL555 S for Class 1 leakage. • Fire damper series FSD-A-L, FSD-A-S certified as per UL555 for 90 min fire rating. • Fire dampers certified by CBRI Roorkee (as per UL555 for 120 mins) and also certified as per BS-476 Part 20. • Fusible link fire dampers certified for 1.5 hrs of fire rating as per UL555 • Sound attenuators certified in SRL, U.K for the static insertion loss as per BS 4718-1971. • EUROVENT certified BA series of AHUs. • EUROVENT hygienic certification for BA-H series of AHUs. • BS/EN1886:2008 for casing strength, tightness, thermal resistance, thermal bridging & filter bypass leakage for AHU. • EN13053 / 2006 for air flow-static pressure performance, heat transfer and heat recovery performance.

Systemair India Pvt. Ltd. (100% owned subsidiary of Systemair AB, Sweden) is having sales offices in 9 cities- Noida, Hyderabad, Bengaluru, Chennai, Kochi, Kolkata, Pune, Mumbai and Ahmedabad. There are 2 ultra-modern manufactur-ing plants having 15000 sq mts area located at Greater Noida & Hyderabad. The Greater Noida unit is a LEED Platinum certified building, rated by the U.S green building council under the New Construction Rating System. It has modern laboratory for testing Air Terminal Devices (ATD) built in compliance with EN & ASHRAE standards for determining air flow pattern and measuring velocity profile of air terminal devices.

The strategically located production units provide professional ventilation solutions and support to local market needs with minimum possible time for delivery. Our wide range of products cater to all types of buildings, from single-family and multi-family buildings to shopping centers, hospitals and industrial facilities. We adapt the solution to your particular type of business. Regardless if it is a new construction or a retrofit project, our products are second to none in quality, reliability and length of service life. You can always trust that Systemair delivers energy efficient ventilation solutions for health, comfort and success.

Air Distribution & Fire Safety ProductsRange of supply & exhaust diffusers, iris dampers, grilles & fire dampers.

Air Handling UnitsCompact & modular AHU’s used for industry, commerce, schools, hospitals etc. It also includes the Hygiene air handling units.

FansThis includes circular & rectangular duct fans, roof fans, box fans & axial fans.

Leading-edge product range

Greater Noida India: LEED certified Platinum rated manufacturing facility.

6 | Air distribution products Air distribution products | 7

Balance-E

Size : Available in Ø100, Ø125, Ø160 & Ø200 mm

- Return air valve- Manufactured from polypropylene in white finish- Fixing: Standard through spring system - Accessories : Mounting frame

Balance-S

Size : Available in Ø100, Ø125 & Ø160 mm

- Supply air valve- Manufactured from polypropylene in white finish- Fixing: Standard through spring system- Accessories : Mounting frame

EFF

Size : Available in Ø100, Ø150, Ø160 & Ø200 mm

- Return air valve- Manufactured from galvanized steel powder painted white- RAL 9010- Fixing: Standard through spring system- Accessories : Mounting frame and plenum box

AL

Size : Ø125 mm

- Regulating air valve- Manufactured from polypropylene in white finish- Fixing: Direct mounting on the wall- Accessories : Mounting sleeves with different diameters and collar- Removable grid divided into several colours : White (standard)

AESize : Ø125 mm

- Regulating air valve with humidity sensor- Manufactured from polypropylene in white finish- Fixing: Direct mounting on the wall with 230V power- Accessories : Mounting sleeves with different diameters and collar- Removable grid divided into several colors : White (standard)

Elegant - AT, VE, VI, VS and VT

Size : Available in Ø100, Ø125 & Ø160 mm

- Supply air valves- Manufactured from galvanized steel, powder painted in white (Type AT painted in black)- Fixing: Direct mounting to round duct as standard- Accessories : Type VT available with plug damper system

BHC

Size : Available in Ø100 & Ø125 mm

- Return air regulator with pressure & humidity sensor- Manufactured from polypropylene in white finish- Fixing: Direct mounting on the wall or the ceiling- Motorized 24V AC

Sinus-BR & BS

Size : Inlet Ø100, 125, 160 & 200 mm

- Nozzle diffuser for supply and return air- Manufactured from galvanized steel and powder painted white- Fixing: Mounted to plenum assembly as standard- Accessories : Side or rear entry plenum box

1H, 2H, 1V & 2V

Size : 100 x 100 mm to 1200 x 1200 mm

- Single or double adjustable deflection grill for supply and return air with 25mm frame border, standard with horizontal front row blades

- Manufactured from aluminium extrusion, powder painted white - Fixing: Standard by screws or concealed fixing on demand- Accessories : Opposed blade damper and equalizing deflectors- Optional extra : Natural anodized finish on request

NOVA-B

Size : 225 x 75 mm to 1225 x 425 mm

- Adjustable blade single or double deflection grilles used for supply and return air- Manufactured from galvanised steel- Fixing: Screws through front face- Accessories : Counter frame and 3 different damper solutions

8 | Air distribution products Air distribution products | 9

3HG, 3HJ, 3HK & 3HF

Sizes : 100 x 100 mm to 1200 x 1200 mm

- Linear fixed bar return air grille with standard border frame of 20mm - Manufactured from aluminum extrusion, powder painted white- Available with blade deflection 00 3HG, 150 3HJ or 450 3HF- Fixing: Standard by screws or concealed fixing on demand- Accessories : Opposed blade damper and equalizing deflectors- Optional extras : Natural anodized finish on request, removable core on request

ALG, ALJ, ALK, ALF, AL1 & AL15

Sizes: 100 x 100 mm to 1800 x 600 mm

- Linear fixed bar grille for supply & return air with 3mm & 5mm bar profile- Manufactured from aluminum extrusion, powder painted white- Available with blade deflection 00 ALG, 150 ALJ, 300 ALK or 450 ALF - Fixing: Standard by screws or concealed fixing on demand- Accessories: Opposed blade damper- Optional extra: Natural anodized finish on request

CS-F

Sizes : 1 to 8 slots, from 300 mm to 1800 mm length in one piece.

- Continuous linear slot diffuser with adjustable directional blades- Manufactured from aluminium, powder painted white- Fixing: Hidden screw through slot opening/ directly to the plenum outlet /duct neck- Accessories : End caps, damper and plenum box- Optional extra : 900 mitered corners in section of 300 mm

Hella - A

Sizes : 1 to 8 slots, from 300 mm to 1800 mm length in one piece.

- Low profile continuous linear slot diffuser with adjustable directional blades- Manufactured from aluminium, powder painted white- Fixing: Hidden screw through slot opening /directly to the plenum outlet /duct neck- Accessories : End caps, damper and plenum box- Optional extras : 900 mitered corners in section of 300 mm

DSL

Sizes: 1 to 6 slots, 1 or 2-way deflection with standard length of 600, 1200 or 1800 mm single piece, continious lengths are available on demand.

- Linear ceiling diffuser with fixed deflectors- Manufactured from extruded aluminium, powder painted white- Fixing: Hidden screw in slot opening/ directly to the plenum outlet/ duct neck- Accessories : End caps, damper and plenum box (insulated or non-insulated)

GC5

Sizes 100 x 100 to 600 x 600 mm

- Egg crate grille used for return air- Manufactured from aluminium, powder painted white- Fixing: Standard through screws- Accessories : Opposed blade damper & plenum box- Optional extra : Natural anodized finish on request

NS

Sizes : L x H from : 200 x 100 to 1200 x 600 mm

- Non vision air transfer grille/ door transfer grille- Manufactured from aluminum extrusion, powder painted white- Fixing : With screw system or by sealant - Fixed combinations between the above dimensions are also available

DSRX

Sizes : 325 x 125 mm to 1225 x 445 mm

- Accoustic transfer grille- Manufactured from aluminum extrusion, powder painted white- Ideal for duct, door or wall mounting for transmission loss- Fixing : Screw system

PER

Sizes : 100 x 100 mm to 1200 x 1200 mm, Standard border frame of 25mm

- Return air exhaust grille with perforated core or expanded aluminum mesh- Manufactured from aluminum and galvanized steel or aluminum only- Fixing: Standard through screws or concealed fixing on demand- Accessories : Opposed blade damper and equalizing deflectors- Optional extra : Powder painted white

NOVA-C

Sizes : 225 x 75 mm to 1225 x 225 mm

- Adjustable blade single or double deflection round duct grille used for supply and return air- Manufactured from galvanised steel, powder painted white- Fixing: Standard through spring system - Accessories : Damper- Stainless steel version available on request

10 | Air distribution products Air distribution products | 11

AFD

Sizes: Ø200 mm

- Circular floor swirl diffuser for supply air- Manufactured from casted aluminium and plastic with metal dirt trap and internal

swirl deflector volume damper- Fixing: By clamps- Accessories : Connection plenum box and dirt trap

Sinus-DR & DC

Sizes: 1001 - 1504 mm

- Adjustable nozzle diffusers for supply air used in square & round duct installation- Manufactured from galvanized steel and powder painted white- Fixing: Spring system as standard- Accessories : Counter frame, opposed blade damper and plenum box

TSOI-T

Sizes: Ø125, Ø160, Ø200, Ø250 and Ø315 mm

- Perforated face diffuser for supply & return air application- Manufactured from galvanized sheet steel painted white - Fixing: Mounted to plenum box or rigid duct diffuser face size 595 x 595 mm (for

ceiling T-panel 600 x 600 mm)- Accessories : Top or side plenum box- Options : Other RAL upon request ( Oval dimensions)

LFD

Sizes: 600 x 600, 900 x 600 and 1200 x 600mm

- Laminar floor diffuser or perforated face diffusers- Manufactured from aluminum to suit flush mounted ceilings, powder painted white- Accessories: Includes top entry plenum and opposed blade damper with operation

lever through front face as standard- Options: Also available with hepa filter

AFG

Sizes : 300 x 300 mm to 600 x 600 mm

- Linear fixed bar floor grille used for supply and return air- Manufactured from extruded aluminum blades & galvanised steel frame, powder painted white- Fixing: Drop in floor opening or mounting frame- Accessories : Opposed blade damper

KVADRA

Sizes: Neck size of 150 x 150 to 600 x 600 mm, standard deflection of 4 Way

- Multicone louver faced ceiling diffuser used for supply and return air - Manufactured from stamped aluminium painted white- Removable core for neck mounting into the duct - Accessories: Opposed blade damper- Optional extra: Top entry plenum box , Anti-Smug frame code AS, Anodized satin finish or powder painted white

PLD

Sizes: Neck size of 150 x 150 to 450 x 450 mm with face size of 595 x 595 for 600 x 600 mm (T-Bar panel replacement on request)

- Plaque type architectural ceiling diffuser used for supply and return air - Manufactured from aluminium, powder painted white- Single or double slot opening with removable core for neck mounting into the duct- Accessories : Opposed blade damper

SCS

Sizes: Ø200, 250 mm, 1-4 slots, overall size 595 x 595 mm

- Square slot diffuser with central core can be fixed or panelled with the same material as the suspended ceiling

- Manufactured from steel plate & extruded aluminium profiles powder painted white- Fixing: By screw on the plenum box or drop rods on ceiling- Accessories : Plenum box, panelled version central core, damper

WTF

Sizes: Neck inlet of Ø315 & 400 mm with 595 x 595 front face

- Swirl ceiling diffuser with fixed blades and conic outlet- Manufactured from aluminium sheet/steel sheet, powder painted white - Fixing: Screw on the plenum box, drop rods on ceiling, suitable for installation in 600 x 600 T- Bar ceiling- Accessories : Damper and plenum box

ACD

Sizes: 250 x 250 to 600 x 600, other sizes on demand

- Ceiling aluminum supply diffusers for variable duty with adjustable curved blades- Manufactured in extruded aluminum powder painted white- Flow pattern : 4-way. 1-way, 2-way and 3-way on demand- Fixing: Screw through front face or concealed - Optional extras: Opposed blade damper

12 | Air distribution products Air distribution products | 13

VVKN

Sizes: 300 to 625 mm

- Swirl ceiling diffuser for air supply and return with fixed blades front panel- Manufactured from steel sheet, powder painted white - Fixing: Central screw through diffuser front plate to plenum box- Accessories: Plenum box, butterfly damper, 3 types of front plates

VVKR - Series

Sizes: 400/16 deflectors, 500/16 deflectors, 600/16 or 24/32/48 deflectors

- Swirl ceiling diffuser for air supply or return with adjustable blades- Manufactured from steel sheet powder painted white- Fixing: Central screw through diffuser front plate - Accessories: Plenum box

DF-T

Sizes: Neck size of 150 x 150 to 450 x 450 mm face size of 595 x 595 for 600 x 600mm (T-Bar panel replacement on request)

- Square ceiling grid diffuser for supply & return air with multi aperture core- Manufactured from extruded and stamped aluminium, powder painted white- Fixing: Removable core for neck mounting into the duct, standard 1 to 5 slot openings- Accessories: Opposed blade damper

CAP-F

Sizes: 125 to 315 mm with face size 595 x 595

- Square multi nozzles ceiling diffuser with directionally adjustable nozzles for supply and return air - Manufactured from galvanized steel, powder painted white- Fixing: Flush mounting in false ceiling, directly suspended in the T-bar framework - Accessories : PER plenum box

CAP-G

Sizes: Ø125 to Ø315 mm

- Square multi nozzles ceiling diffuser for supply & return air, specially designed for flush mounting in false ceiling

- Manufactured from galvanized steel, powder painted white - Fixing: Screwing on the plenum box, drop rods on ceiling or directly suspended in the

T-bar framework carrying structure- Accessories : PER plenum box

Konika-AT

Sizes: Neck Ø160, Ø200, Ø250 & Ø315 mm

- Circular adjustable vanes ceiling diffuser for supply and return air- Manufactured from aluminium, powder painted white- Fixing: By screw to a circular duct/ plenum box/ pop rivets /directly suspended in

the T-bar framework carrying structure- Accessories: Butterfly damper or side entry PER plenum box

SCSR

Sizes: 2-3 slots, overall size 595 x 595 mm

- Square slot diffuser with supply & return integrate in the same plate- Manufactured from extruded aluminium profiles and central perforated plate,

powder painted white- Fixing: By screw on the plenum box, drop rods on ceiling- Accessories : Plenum box, damper

CRS

Sizes: Round inlet Ø125 to Ø400 mm

- Circular swirl diffuser with fixed blades- high induction capacity, used in VAV sys-tems with large variations in air flow rate

- Manufactured from steel, powder painted white - Fixing: Mounting bridge or screws on the plenum box, drop rods on ceiling, or

directy to supply duct connection- Accessories: Mounting bridge, damper and plenum box

CRSP

Sizes: Neck size Ø125, Ø160, Ø180, Ø200 & Ø250mm - Swirl diffuser with fixed deflector designed to achieve larger air volume capaci-

ties with high induction levels for ceiling installations of 2.7 to 3.5 meter- Manufactured from PP & has standard white color - Fixing: Standard central screw fixing system for M6 or M8 mounting screw

Konika

Sizes: Neck size Ø160, 200, 250 and 315 mm

- Circular ceiling diffuser for supply or return air with fixed deflector cones- Manufactured from aluminium, powder painted white- Adjustable central cone for heating and cooling application- Fixing: Ideal for round ducting

14 | Air distribution products Air distribution products | 15

CFD

Sizes: Round neck Ø160 to Ø315 mm

- Adjustable circular perforated ceiling diffuser for supply with internal adjustable code to provide the desired throw and airflow pattern

- Manufactured from galvanised steel, powder painted white- Fixing: Screw or pop rivets on the plenum box or connected directly onto a duct- Accessories: Plenum box, TPP ceiling plate (600 x 600 mm)

Konika-A

Sizes: Standard round neck Ø160 to Ø500 mm

- Circular adjustable vanes ceiling diffuser for supply and return air - Manufactured from steel, powder painted white- Fixing: Directly to a circular duct or plenum box by screw or pop rivets- Accessories: PER plenum box

DGVAC

Sizes: Ø200 - Ø630 mm

- Variable geometry diffuser with manually and individually movable blades from 0° (completely open) to 90° (completely closed) and equalizing grid.

- Manufactured from aluminium with steel blades, powder painted white - Fixing: Screws through the neck on the plenum box, or rigid ducting- Accessories: Plenum box with damper, equalising plate

RSD

Sizes: Ø4”, Ø8”, Ø12”, Ø16”, Ø20”

- Spot jet nozzle diffuser for supply air into large areas- Manufactured from aluminium, powder painted white- Fixing: Mounted directly to the flange or wall with screws through the front frame- Accessories: Butterfly type damper2 flap type

Sinus-C/T

Sizes: Ø100 to Ø315 mm

- Circular nozzle ceiling diffuser with adjustable external plate, complete of plenum box for visible installation with top connection

- Manufactured from galvanised sheet steel, powder painted white- Fixing: Screwing up into the ceiling from the inside of the unit. TSP has a M8 blind

rivet for suspension- Accessories: Damper and measuring taps for balancing

Sinus-C

Sizes: Ø100 to Ø200 mm

- Circular nozzle ceiling diffuser with adjustable external plate, complete of plenum box for visible installation

- Manufactured from galvanised sheet steel, powder painted white- Fixing: Screwing up into the ceiling from the inside of the unit. TSP has a M8 blind

rivet for suspension- Accessories : Damper and measuring taps for balancing

IKD

Sizes: Ø180 to Ø500 mm

- Circular ceiling diffuser with inlet cone & an inner & outer cage with openings for supply air in the peripheral surface & the underside.

- Manufactured from galvanised sheet steel, powder painted white - Fixing: Screws in the duct or combined with plenum box, installation height

between 4 & 15 meter - Accessories: Plenum box, damper, actuator

RWH

Sizes: 250, 315, 380 and 450 mm

- Circular multi-cone high flow jet diffuser for supplying air to large areas with adjustable throw and distribution pattern

- Manufactured from aluminium, powder painted white- Fixing: With screws or pop rivets to a round duct or a mounting plate- Accessories: With mounting plate code RWH

AJD

Sizes: Ø100, Ø125, Ø160, Ø200, Ø250, Ø315, Ø400 & Ø500 mm

- Long throw jet nozzles, aesthetic design with decorative ring, used for spot cooling, adjustable in all directions up to a max of 40°

- Manufactured from aluminium, powder painted white- Fixing: Concealed screws

DJD

Sizes: No. 906 to 3510

- Drum jet louver diffusers with adjustable deflectors, used for long throw & high air volume, adjustable up to a max of 30° inclination

- Manufactured from aluminium powder painted to white - Fixing: Screws through front face frame - Accessories: Opposed blade dampers

16 | Air distribution products Air distribution products | 17

SDD

Sizes: Inlet Ø160 to Ø630 mm Available in rectangular, circular, semi-circular, quadrant construction

- High capacity displacement diffusers for cooling & ventilation of large spaces with minimal energy

- Manufactured from double perforated steel, powder painted white- Fixing: Duct mounted from the top or bottom to facilitate installation- Accessories: Volume control damper

SPM

Sizes: Ø160 to Ø400 mm

- Iris damper for measuring & adjusting the air flow with more choking ability than the SPI model

- Manufactured from galvanised sheet steel and fitted with a rubber seal tested for air-tightness

- Fixing: Screws or pop rivets in the duct - Accessories: RLL access door for cleaning

SPI

Sizes: Ø80 to Ø800 mm

- Iris damper for measuring and adjusting the air flow, low noise level, centrically-formed air flow and fixed test points

- Manufactured from galvanised sheet steel and fitted with a rubber seal tested for air-tightness

- Fixing: Screws or pop rivets in the duct - Accessories: RLL access door for cleaning

SPI-F

Sizes: Ø100 to Ø315 mm

- Iris damper fitted with a motor designed for controlling the air flow using two predetermined settings

- Manufactured from galvanised sheet steel & fitted with a rubber seal tested for air-tightness

- Fixing: With screws or pop rivets in the duct - Accessories: RLL access door for cleaning

RDR

Sizes: Ø80 to Ø250 mm, Operating pressure : 50 to 200 Pa

- Constant Air Volume (CAV) device for air volumes up to 200 l/s- Manufactured from plastic in fire reaction class M1 (F), grey color - Fixing: Bayonet with perimeter gasket seals, can be installed in the duct both

horizontally and vertically- Accessories: Spacers and shims

RPK-R

Sizes: Ø80 to Ø315 mm

- Non-insulated or insulated constant air volume unit- Manufactured from galvanized steel- Fixing: To the duct by tight spigot as standard- Optional extra: Powder painted white

RPK-S

Sizes: 200 x 100 mm to 600 x 600 mm

- Non-insulated or insulated constant air volume unit- Manufactured from galvanized steel, regulation with damper blade (number of

blades correspond to the size of the unit)- Fixing: By flanges- Optional extra: Powder painted white

RA

Sizes: Ø125, 160, 200, 250, 315 and 400 mm

- Round variable air volume terminal units with/without external acoustic cladding - Manufactured from galvanized mild steel, operated with compact controller as

standard- Optional extra: Outlet silencers, pneumatic & pressure controlled controllers,

compact controller with BAC net communication

RSV & RSV-I

Sizes: Ø125 to 400 mm

- Variable air volume terminal units with internal insulation or double skin- Manufactured from galvanized steel sheet with actuator as standard- Optional extra: Outlet silencers, Multi-outlet plenum boxes, compact controller with BAC net communication

RPV-S

Sizes: 200 x 200 mm to 1200 to 1000 mm

- Non- insulated or insulated square variable air volume unit- Regulation with opposed blades- Manufactured from galvanized steel with actuator as standard- Fixing: By flanges

18 | Air distribution products Air distribution products | 19

WDD

Sizes: 150 x 150 mm to 1200 x 1200 mm

- Regulating volume control damper with low leakage- Facilitates smooth control of the air volume with locking quadrant or motor-base

& extended shaft- Manufactured from extruded aluminium blade & frame- Damper blade axis are set into self lubricating nylon bearings

WDD-GI

Sizes: 150 x 150 mm to 1200 x 1200 mm

- Regulating volume control damper for a smooth control of the air volume with locking quadrant or motor-base and extended shaft

- Manufactured from galvanized steel sheet frame & reinforced single skin or aerofoil blades

- Damper blade axis are set into self lubricating bronze bearings- Lateral seals and damper blade rubber seals to assure low leakage

WLDX

Sizes: 1200 x 1200 mm to 6000 X 3000mm

- Regulating volume control damper for a smooth control of the air volume with locking quadrant or motor-base and extended shaft

- Manufactured from galvanized steel sheet frame with aerofoil interlocking galvanised steel blades, for minimum leakage.

- Operating gear out of ducted airway with electric or manual control options.

KK & KKT

Sizes: Ø100 to Ø800 mm

- Spigot damper, round duct balancing damper & round duct shut-off damper- Used for continuous regulation of air flow - Manufactured from galvanized steel sheet as standard- Can be operated manually with quadrant or with actuator

PRD

Sizes: 300 x 300 to 1000 x 1000 mm

- Pressure regulating damper for supply and exhaust air application- Manufactured from high quality aluminium alloy extrusion, powder painted white- The blade pivot mechanism incorporates nylon bushes and stainless steel pins- Balanced aerofoil blade principal requires no power supply

RSK

Sizes : 100 to 630 mm

- Back draft damper for circular ducts- Manufactured from galvanised sheet steel- Fixing: The damper can be mounted horizontally or vertically

VKK

Sizes : 100 to 400 mm

- Back draft damper for installation in horizontal ducts- Manufactured from galvanised sheet steel, louver is manufactured from nylon- Fixing: Directly to the duct

GL

Sizes : 150 x 150 to 1000 x 1000 mm

- Gravity louvers - Manufactured from galvanised steel sheet and aluminium- Fixing: To the wall and duct- Availability of bigger sizes in partition

EWL-YG/WG

Sizes: 150 x 150 to 1200 x 1200 mm & above size as part

- External weather louvers- Manufactured from high quality aluminium alloy extrusion, powder painted white

complete with bird screen- Optional: Natural anodized finish or steel (GI) on request

SL

Sizes: 300 x 300 mm to 1200 x 1200 mm

- Sand trap louvers ideal for preventing sand entering ventilation system- Manufactured from heavy duty aluminium frame and blades - Integral collection chute

20 | Air distribution products Air distribution products | 21

FSD Series (UL listed)

Sizes: 8 X 8 inch to 36 X 36 inch

- Fire dampers are UL555 classified for 90 minute fire rating - Fire and smoke damper are UL555 and UL555 S classified with Class 1 leakage- Double skin aerofoil blade- Heavy duty interlocking blades with fully enclosed blade linkage mechanism- High performance blade seal and precised stainless steel side seal- Options: Flanges on request

FSD(F)-F Series (UL listed)

Sizes: Modular construction upto 2000 X 2000 mm

- FSD(F)-F series Fusible link fire dampers are UL 555 classified for fire rating 90 minutes- Manufactured in leaf type blade - Heavy duty interlocking blades with fully enclosed blade linkage mechanism- Fixing: Inside the duct with screws-Options: Available in sleeve

RSA

Sizes: Ø300 to Ø1600 mm

- Round sound attenuators- Manufactured from heavy gauge galvanized steel sheet. Accoustic insulation made

of fiberglass tissue protected by aluminum perforated plate- Fixing: Through flat ended flanges with threaded inserts- Attenuators above Ø500 have guiding fins and attenuating centre pod to decrease

turbulence and increase attenuation

SSA

Sizes: 300 X 300 mm to 2000 x 1200 mm or above

- Square and rectangular sound attenuators- Manufactured from heavy gauge galvanized steel sheet. Accoustic insulation made

of fiberglass tissue protected by aluminum perforated plate- Attenuating splitters are constructed from press formed frame- Attenuator casing is welded and sealed with mastic to assure low casing leakage

WGD / WGDRS1

- Motorised Fire and smoke damper & fusible link fire damper- Manufactured from 16 gauge galvanized steel blade and frame- Fire tested by CBRI Roorkee for 120 minutes fire rating as per UL555-1995- Heavy duty interlocking blades and fully enclosed blade linkage mechanism- Constructed with stainless steel lateral blade seals and self lubricating sintered

bronze bushes- WGDRS1 Fire tested as per BS-476 Part 20, 120 minutes constructed with

areofoil 20 gauge galvanized steel blade and stainless steel parts

RFDU & RFDI

Sizes: 100mm diamter to 50mm diameter in standard length of 25 feet

- Flexible duct is Class 1 air duct , light weight ,strong fully flexible.- Manufactured from double lamination of films permanently bonded to a coated

spring tough steel wire helix- Thermal efficiency is provided by wrapping the exterior with a blanket of fiber-

glass wool insulation in various densities & thickness- Available both in insulated and not insulated

Hella-A-PB

Sizes : 600 to 2400 mm

- Side entry square plenum box for Hella-A- Manufactured from galvanised sheet steel- Fixing: On to the ceiling with drop rods to plenum connection brackets- Limited sizes are stock articles other options on demand

Certifications

Certificate No: 176390-2015-AQ-IND-RvA Place and date: Chennai, 09, April, 2018

Appendix to Certificate

Systemair lndia Pvt. Ltd.Locations included in the certification are as follows:

Site Name Site Address Site ScopeSystemair lndia Pvt. Ltd. HO & Unit 1: Plot No.3,

Ecotech-1, Sector-31, Kasna, Greater Noida – 201 308, Uttar Pradesh, India

Design, development, manufacture, marketing, supply and service of HVAC products

Systemair lndia Pvt. Ltd. Unit 2: Plot No. 8-84/14/11,Opp. Sai Geetha Ashram,Devaryamzal, Medchal Dist.,Hyderabad – 500 078,Telangana, India

Manufacture, marketing, supply and service of HVAC products

Lack of fulfilment of conditions as set out in the Certification Agreement may render this Certificate invalid.ACCREDITED UNIT: DNV GL Business Assurance B.V., ZWOLSEWEG 1, 2994 LB, BARENDRECHT, NETHERLANDS. TEL:+31102922689. assurance.dnvgl.com

Page 1 of 1

C E R T I F I C A T E O F C O M P L I A N C E

Certificate Number 20180410-R27629 Report Reference R27629-20180226

Issue Date 2018-APRIL-10

Bruce Mahrenholz, Director North American Certification Program UL LLC Any information and documentation involving UL Mark services are provided on behalf of UL LLC (UL) or any authorized licensee of UL. For questions, please contact a local UL Customer Service Representative at http://ul.com/aboutul/locations/

Page 1 of 1

Issued to: SYSTEMAIR INDIA PVT LTD PLOT NO.-03, SECTOR-31 ECOTECH-1,SITE IV KASNA, GREATER NOIDA Uttar Pradesh 201308 INDIA

This is to certify that representative samples of

DAMPERS FOR FIRE BARRIER AND SMOKE APPLICATIONS Fire Dampers for use in static systems Models No: FSD (F)-F-V-S-F90, FSD (F)-F-V-L-F90, FSD (F)-F-V-M-F90.

Have been investigated by UL in accordance with the Standard(s) indicated on this Certificate.

Standard(s) for Safety: UL 555 - Standard for Safety for Fire Dampers Additional Information: See the UL Online Certifications Directory at

www.ul.com/database for additional information

Only those products bearing the UL Certification Mark should be considered as being covered by UL's Certification and Follow-Up Service. Look for the UL Certification Mark on the product.

22 | Air distribution products Air distribution products | 23

Hella - A

KonikaFixed cone diffuser

SDDHigh capacity displacement diffuser

Manufactured in India.

LFDLaminar floordiffuser

Size:600-1200mm

Floo

r/Di

spla

cem

ent

Diff

user

s

Linear diffuser for continuous ceiling application

AFD

CAP-F CAP-G

DGVAC

200 -630mm

FSD Series

RPV-SSquare Variable air volume unit

KK & KKTSpigot damper, round duct balancing damper

RSKBack draft damper

Hella- A-PB

WGD SeriesRated for 2hrs fire rating & CBRI standard

NORTH / EXPORT

NoidaA-19, First Floor, Sector-64 Noida, U.P 201307Tel: +91 120 4639 700

EAST

Kolkata92/2A Bidhan Nagar Road, Kolkata, West Bengal 700067 Tel: +91 983 0420 473

WEST

Ahmedabad138/1655, Karnavati Appartment, Paras Nagar, Sola Road, Naranpura, Ahmedabad-380063 Tel: +91 9624 448 912

MumbaiOffice No. G 16, Neo Corporate Plaza, RamChandra Lane Ext., Kanchpada, Malad W, Mumbai-400064Tel: +91 08108124863

PuneOffice No 7B , B wing Manorama Apartments Near Leapbridge School, Lane no 7, Prabhat Road, Pune-411004 Tel: +91 20 66215872

SOUTH

HyderabadPlot No. 8-84/14/11; Opp. Sai Geetha AshramDevaryamzal, Medchal Dist, Hyderabad 500078, India Tel: + 91 40 40176396

Bengaluru40 Sindhoora, MLA Layout, Block 4, RMV 2nd Stage, Bengaluru, Karnataka - 560094 Tel: +91 80 2341 7922 / 6922

Cochin53/1690 B, 2nd Floor. Meppullil Building,Near to EVM Honda Kachappilly Road, Vyttila Ernakulam,Kerala -682019 Tel: +91 904 8181 300

Syst

emai

r IN

/ A

DP

/ 0

5/ 2

018

Systemair India (H.O)

Plot No.03, ECOTECH I,Sector-31, Kasna, Greater Noida, U.P 201308

Tel: +91 120 4763 100 Fax: +91 120 4763 101

www.systemair.com