3
Drass Tecnologie Sottomarine 1 Oxygen Shock Test Machine and Test Facilities This testing facility is composed of a dedicated unit for oxygen adiabatic compression test; this test can be applied to fittings, valves, pressure reducer, gauges, and flexible hoses; the test qualifies the validity of the equipment subject to testing for oxygen use at a given pressure Description FD37-0003

Oxygen Shock Test Machine and Test Facilities - DRASS...EN ISO 10297:2006 6.14 Transportable gas cylinder – Cylinder valves – Specification and type testing. O2 shock test management

  • Upload
    others

  • View
    1

  • Download
    0

Embed Size (px)

Citation preview

  • DrassTecnologie Sottomarine

    1

    Oxygen Shock Test Machine and Test Facilities

    This testing facility is composed of a dedicated unit for oxygen adiabatic compression test; this test can be applied to fittings, valves, pressure reducer, gauges, and flexible hoses; the test qualifies the validity of the equipment subject to testing for oxygen use at a given pressure

    DescriptionFD37-0003

  • .

    2

    The equipment design allows to carry out the tests according to the following Rules: EN ISO 10524-2:2006 6.2.7 Pressure regulators for use with medical gas. The rule is specifically dedicated to test ignition resistance of pressure regulators.EN ISO 10297:2006 6.14 Transportable gas cylinder – Cylinder valves – Specification and type testing.

    O2 shock test management system

    The equipment is completely followed by a management program, installed on a dedicated test station, that allows to acquire signals coming from the instruments, and to drive the pressurization and depressurization. Test parameters can also be changed so as to configure the machine to different standards.The software manages the steps of the adiabatic test in full safety, with sequential checks on the test parameters and sensor data.The data acquisition stage is crucial for the success of the test since it allows to display both the curve of the cycle of impact, and the correct temperature of the pre-heating oxygen; the program also automatically issues a report for immediate reading of the test data.

  • 3

    As a result of the tests, a complete photographic report covering the inspection of the tested equipment is issued. Customer surveyors can attend the tests together with a third part (RINA, DNV, Lloyd’s, etc).

    Oxygen Shock Test Machine and Test Facilities

    DRASS GROUP OF COMPANIESVia Padre Nicola Magri, 112, 57121 – Livorno, ItalyPhone +39 (0) 586 421221 Fax +39 (0) 586 421223em@il: [email protected]