POLARIS PREDATOR NERF BAR

ATTACH FOOT PEG TO BRACKET USING SUPPLIED HARDWARE:(2) ¼-20 HEX HEAD BOLTS(2) ¼-20 LOCK NUTSTORQUE 4.3 Ft Lbs.

1. Maintenance: Periodically, check all fasteners for tightness and re-torque to above specs.2. Care and Cleaning: Use only mild soap and water to clean.3. Customer Service: For further information contact Pro Armor (714) 520-5390

THREAD WEB THROUGH CLIP AS SHOWNTHREAD WEB THROUGH TABS AS

INSTALLTO RIGHT FOOT PEG USING:(2) 3/8-16 X 1" LG BUTTON HEAD BOLTS NOTE: TORQUE TO 35 FT-LBS

INSTALL RIGHT WEB STRAPS TO FRAME USING: (2) WEB CLIPS AS SHOWN. SEE FIG 1

SECURE RIGHT NERF BAR TO FRONT MOUNT BRACKET WITH:(1) 3/8-16 X 1-3/4" LG BOLT(1) 3/8 or M10 FLAT WASHER(1) 3/8-16 NYLOCK NUTNOTE: TORQUE TO 35 FT-LBS

INSTALL RIGHT WEB STRAPS TO WELDED NERF BAR TABS AS SHOWN. SEE FIG 2

INSTALL FRONT MOUNT BRACKET,TO FRAME USING:(2) 1/4-20 X 3/4" LG HEX BOLTS(2) 1/4-20 WASHERS(2) 1/4-20 NYLOCK NUTSNOTE: TORQUE TO 10 FT-LBS

INSTALL FENDER BRACKET TO FENDER USING O.E.M. HARDWARE

INSTALL RIGHT NERF BAR SUPPORT PLATE TO FOOT PEG USING:(2) 1/4-20 X 3/4" LG HEX BOLTS, (2) 1/4-20 WASHERS AND(2) 1/4-20 NYLOCK NUTS. NOTE: TORQUE TO 10 FT-LBS

fig 1 fig 2

1) Maintenance: Periodically check all fasteners for tightness and re-tighten as required. Customer service: For further information call Pro Armor at 951-270-0559

P042050