PAG Camera Support Product Catalogue

Industry PioneersPAG began designing and manufacturing production andpost-production equipment for the film industry over 40years ago. During the 1980s the demand for power for thefirst portable electronic cameras led the company into theBroadcast Television arena.

• PAG introduced one of the industry’s earliest batterymounting systems, the PAGlok System, which is stillwidely used today.

• PAG pioneered microcomputer-controlled fast-chargingfor broadcast camera batteries with the introduction ofPAG ACS (Advanced Charging System). It had previouslybeen believed that fast-charging was dangerous andwould result in reduced battery life. PAG proved theopposite was possible.

Premier QualityIt is PAG’s intention to create the highest quality product forthe market. Safety, reliability and durability are the primeconcerns at all stages of a product’s development. The name‘PAG’ on a battery, charger or light is an assurance that onlythe highest-quality materials have been used in itsconstruction, and that it has been designed to have thelongest possible service life.

Technological InnovationPAG has always maintained its own Research &Development facility, which has enabled the company todevelop the world-leading technology that is embodiedthroughout its product range today:

• PAGlink is the only battery system that enables you tolink multiples of batteries.

• PAG’s unique charging software is the best forextending battery life.

• Paglight is the only halogen, HMI and LED on-boardcamera light.

Bespoke PowerPAG can adapt or develop its products to the specificrequirements of your organisation’s working preferences.This bespoke service is possible because PAG is theoriginator, designer and manufacturer of its products.PAG’s specialist knowledge and experience is invaluablein helping you achieve the perfect portable power andcamera lighting system for your company.

PAG is Your Partner in Power

2

Intro

duct

ion

Welcome to the PAG Product Catalogue.

Here you will find information to help you choose the best portable powerand lighting products for a wide range of equipment including HD DSLRcameras, handheld camcorders, broadcast ENG cameras, high-definitiondigital cinema and 3D camera set-ups.

PAG offers high-performance batteries to meet all your powerrequirements; chargers that intelligently and efficiently achieve the bestfrom your batteries, even after years of demanding use; and camera lightsthat give you the correct source of illumination for any professionalsituation, in the most versatile and economic way. Safety, reliability anddurability come as standard.

PAG is the British-based designer and manufacturer of the mosttechnologically advanced power and lighting products for broadcastingorganizations, cinematographers, video production companies, equipmenthire companies, professional videographers, the military and civilauthorities.

When you buy a PAG product you enter into a partnership with a companythat will support you throughout that product’s lifetime, into your nextpurchase, and right through your professional career.

Service SupportPAG provides full technical support throughout aproduct’s lifetime, which includes servicing, repairsand technical advice. The quality of this service issecond-to-none, and is one of the major reasonsthat broadcast organisations choose PAG.

PAG’s authorised service centres share PAG’sspecialist knowledge and experience. Using thesecompanies ensures the continuation of the qualitystandard for which you first chose PAG products.

Worldwide AvailabilityPAG products are available via a worldwide networkof companies and agents as well as our on-linesales service at www.paguk.com

ContentsSYSTEMS DIAGRAM 4

BATTERIES 5

PAG’s Total Battery Design Philosophy 5

PAGlink Batteries 7

PAG L95e Batteries 8

PAG L95 & L110 Time Batteries 9

PAG L190e Batteries 10

PAG ZL-Series Batteries 11

Pagbelt NMH 12

CHARGERS 13

PAG Chargers Extend Battery Life 13

PAG Cube Simultaneous Chargers 14

PAG Rack-Mountable Chargers 15

PAG Universal Chargers (PAGlok, NP1 etc) 16

PAG Low-cost Chargers 17

PAG Charge Adaptors 18

LIGHTING 19

Standard Paglight (12V) 20

Standard Paglight Accessories 23

Standard Paglight Kits 24

Mini Paglight (12V) 25

Paglight C6 (6V) 26

Paglight 250W 27

Mounting Options (all Paglights) 28

CAMERA SUPPORTS 29

7.2V POWER SOLUTIONS 30

BATTERY MOUNTS & ADAPTORS 31

Dual Battery Mounts 32

CONTINUOUS POWER UNITS 33

RADIO MIC RECEIVER BRACKETS 33

AIR TRANSPORTATION 34

WARRANTY AND SERVICE 35

3

Contents

PAG V-Mount System

PAG Advanced Battery Systems

PAGlok System

PAG Snap-on System

4

9752 Quasar/PSU9726 Quasar

9792 AR124PLD

9613 Freelancer

9522/-PAGlok

Connector

9727 QUASAR

9795 PULSAR

All-Chemistry PAG chargers incorporating patented slidingSnap-on compatible connectors, suitable for charging PAGLi-Ion and some Anton-Bauer batteries (not Dionic). PAGlokand V-Mount batteries can also be charged via the front PP90sockets using the appropriate charge adaptor.

9753 QUASAR/PSU

9551Power Plate dualbattery mount forPAGlok batteries

9613V PAG V22-channel

sequential charger

9522V/-V-Mount

Connector

9702V PAG Cube4-channel simultaneous

charger featuring IntelligentParallel Charging

PAG V-Mount batteries canalso be charged using theappropriate Sony charger

Other formats can be charged via the front PP90sockets of AR124PLD & Quasar chargers usingthe appropriate charge adaptor.

9702 Cube iPC

9383L95 TimeBattery

9302AL110 Time

Battery

9310AL95e

Battery

9522/64V-Mount to

PAGlok Adaptor

9518Snap-on to

PAGlok Adaptor

9551VPower Plate dualbattery mount forV-Mount batteries

9302L110 Time

Battery

9310L95e

Battery

9316ZL-150Battery

9315ZL-50Battery

9382L95 TimeBattery

9317ZL-125 Time

Battery

9365L190eBattery

9512PAGlok to

V-Mount Adaptor

9510Snap-on to

V-Mount Adaptor

9553VPower Plate

dual battery mount forV-Mount batteries

9303PL96eBattery

9553Power Plate

dual battery mount forPAGlok batteries

9302VL110 Time

Battery

9360L95 TimeBattery

9317VZL-125 Time

Battery

9552VPower Plate dualbattery mount forV-Mount batteriesto camera withAnton-Bauer Mount

9552Power Plate dualbattery mount forPAGlok batteriesto camera withAnton-Bauer Mount

Batte

ries

9304PL96T

Time Battery

9511V-Mount to

Snap-onAdaptor

9517PAGlok toSnap-onAdaptor

NEW PAGlinkSystem High-Power LinkingBatteries

9310VL95e

Battery

9316VZL-150Battery

9315VZL-50Battery

9365VL190eBattery

PAG’s Total Battery Design Philosophy

Technologically AdvancedPAG batteries are the most technologically advanced in the industry.They incorporate many unique proprietary features designed to assistthe cameraman and prolong battery life.

PAG batteries are manufactured to withstand the strains and stressesof use in the harshest environments, and to perform consistently overtheir natural lifetime.

PAG uses only the highest quality components in the construction ofits batteries. Safety, reliability, and durability are the prime concerns,from conception to final assembly.

CompatibilityPAG has always embraced universality. It is the only manufacturer thatoffers products that are compatible with the four most popular batterymounting systems: V-Mount, PAGlok, Snap-on (Anton Bauer) and NP1.PAG also offers mount adaptors that enable you to convert systems.

Why Li-Ion?Modern cameras and working conditions require lightweight, reliablebatteries, with extended run-times, longer cycle lives and accuraterun-time information. PAG Li-Ion batteries are designed for suchconditions. They utilise advanced, high-quality Li-Ion cell-technologythat possesses a high energy density, making it particularly well-suitedto powering a wide range of modern cameras.

Two 95 watt-hour PAG Li-Ion batteries will provide enough power for aday’s shooting for most broadcast camera set-ups that include anon-board light. PAG Li-Ion batteries are compact and can betransported easily in your camera bag.

PAGlink Li-Ion batteries can be linked to provide a much highercurrent draw capability, often required for powering high-definitioncameras and accessories used for digital cinematography.

One of the benefits of Li-Ion technology is the low self-discharge rate.This means that batteries do not have to be topped-up if they have notbeen used for a few days. There is also no ‘memory effect’ as Li-Ionbatteries do not suffer long term problems as a result of partialcharging and discharging.

Latest Cell-TechnologyPAG uses only the latest, premium-quality, branded Li-Ion cells in itsproducts. High-quality cells are a vital prerequisite to the creation of asafe Li-Ion battery. Low-quality cells, which have crept into ourindustry, are susceptible to internal shorts. The name ‘PAG’ on abattery is an assurance that only the highest-quality materials havebeen used in its construction.

PAG’s cell-testing programs continuously assess all relevant cells fromreputable manufacturers and the company selects the best using anumber of criteria, including headline capacity, cycle life, voltage hold-up under load, and most importantly, safety. However, safety andreliability are not merely determined by the choice of cell - it is thetotal battery design philosophy that is important.

No Cell-ImbalanceThe Li-Ion cells are matched to extremely close tolerances so that thebattery pack is perfectly balanced. Severely imbalanced batteries canleak electrolyte and Li-Ion cells cannot be rebalanced after assembly.The low-resistance inter-cell nickel strapping and cell layout areconstructed to optimize current sharing, reducing one of the commoncauses of cell-imbalance.

PAG is Synonymous with SafetyPAG invests a great deal of time and money designing andmanufacturing safe battery systems which meet very stringenttechnical requirements.

PAG ensures that the battery is allowed to operate only within strictlimits. PAG could allow higher charging voltages, and lower dischargevoltages, which would create a battery with a slightly higher capacity.PAG could also allow a higher current to be drawn, however, the resultwould be reduced battery life and an increased chance of electrolyteleakage. Accordingly, the battery’s internal protection circuits and thesophisticated protection software have been set conservatively, withsafety and battery longevity as the prime considerations.

PAG’s electronic protection system guards against: over-voltage,under-voltage, over-current, over-charge, over-discharge, over-temperature, under-temperature and inappropriate charge sources.The protection circuits are fast-acting, and able to withstand high-voltage transients and reverse voltages.

Multiple-levels of safety, backed-up with proven software-drivenmechanisms, are included so that safe operation is not totallydependent upon the continual operation of a single protection circuit.

The circuit boards within the battery are designed so that all points ofhigh voltage are separated by the maximum possible isolation gap,thereby negating the chances of a problem even if electrolyte were toleak across the board.

As a final, absolute protection against electrolyte leakage, the circuitboards are completely coated with Parylene, a conformal coating thatis usually reserved for specialist aerospace and medical applications.In long-term tests, Parylene was the only circuit coating material whichwas not softened and eventually penetrated by the cell electrolyte.This expensive, but essential process is unique to PAG batteries andeffectively guarantees that there will not be a fire in the event ofelectrolyte leakage.

Polycarbonate CasesThe mechanical design of the battery provides protection in the eventof accident or abuse, cradling the cells against damaging shock andvibration. PAG battery cases are manufactured from high-impact,injection-moulded polycarbonate. The material is inherently verystrong (it is used for motorcycle crash helmets) and is unaffected bythe solvent powers of the battery electrolyte. Commonly usedmaterials, such as ABS, are dissolved and weakened by the electrolyte.PAG cases also feature non-slip external features for secure handling.

continued over

5

Batteries

Batteries

PAG’s Total Battery Design Philosophy

Two button presses on-loadactivates the time display.The ‘HRS’ LED flashes twice.

The number of hours is indicatedby the number of lit LEDs:1 LED = 1 hour.

The ‘MINS’ LED then flashestwice.

The number of minutes isindicated: 1 LED = 10 mins.

5 LED Run-Time & Capacity IndicatorCapacity is displayed as a percentage (each LED = 20% approx.)1 LED flashing = less than 10% of capacity available.

6

Batte

ries

Numeric LCD Run-Time & Capacity IndicatorPAG Time Batteries incorporate a numeric LCD that displays remaining run-time and battery capacity.At the press of a button it shows run-time against load...

...followed by percentage (1%increments).

...followed by minutes....in hours... Available capacity is alsodisplayed, in ampere-hours(0.1Ah increments)...

UN TestingPAG Li-Ion batteries are tested, by an independent test facility, forcompliance with United Nations specifications (a requirement of airtransport and civil aviation authorities). Testing is required becausepoorly constructed Li-Ion batteries have been known to break downinternally and self-ignite (See Air Transportation on Page 34).

A test report for each of PAG’s Li-Ion batteries, and not just theindividual cells, can be obtained from PAG Ltd.

Charger Communication & Longer Battery LifePAG Li-Ion batteries incorporate an integral digital communicationsystem which speaks to PAG chargers and determines the right chargeregime for the battery; thereby achieving the maximum capacity safely,and ensuring a longer battery cycle life.

Viewfinder Data DisplayPAG batteries support various viewfinder data displays, to supply thestate-of-charge stored in the battery’s integral computer, for display inthe camera viewfinder.

• The PAGlink battery system allows multiple batteries, working asone, to report their collective state-of-charge information for displayin the camera viewfinder. PAGlink supports all viewfinderinformation systems and adapts automatically once connected.

• The PAG V-Mount L95e (Model 9310V) displays available capacityas a percentage in the Sony camera viewfinder.

• The PAG L95eR (Model 9310R) displays available capacity as apercentage in the Red One camera viewfinder.

• The PAG Snap-on L95e (Model 9310A) displays availablecapacity in the viewfinder of cameras that use the Anton-Bauersystem.

Upgradeable FirmwarePAG batteries are firmware upgradeable, so that the program can beupdated in the field, if necessary, without the need to open the batterycase.

Service and Technical SupportPAG provides full technical support throughout a product’s lifetime.The quality of this back-up service is second-to-none because PAG isthe concept originator, design authority and manufacturer of itsproducts. It is one of the main reasons why broadcast organisationschoose PAG.

Capacity IndicationPAG’s battery capacity indication technology is the most advanced inthe industry. PAG Time Batteries incorporate a built-in capacityindicator and run-time display that is more accurate than any otheravailable. It is one of the best examples of superior PAG technology.

PAG’s revolutionary integral battery display software was designed anddeveloped at a time when the LED ‘fuel-gauge’ was state-of-the-art.The Time Battery features an alpha-numeric LCD that provides acontinually updated prediction of remaining equipment run-time,on-load, to a resolution of 1 minute. Capacity is displayed in Ah(to a resolution of 0.1Ah) and percentage (to a resolution of 1%).

The battery’s internal processor achieves this by taking into accountthe changes of load that occur during use, the charge status, thecondition of the cells, and the ambient temperature. PAG is the onlycompany to have achieved this.

PAG’s lower-cost e-series batteries incorporate a 5-LED capacityindicator that is able to show percentage state-of-charge, and on-loadrun-time to a resolution of 10 minutes. Additionally, the followinginformation is available via the battery display: battery software versionnumber; total cycle count to date; state-of-charge; and internal celltemperature.

7

Batteries

• A one-system power solution for all cameras

• The only system that allows you tolink multiples of batteries

• Smaller, lighter V-Mount Li-Ion batterieswith a higher energy density

• Transportable by passenger aircraftwithout quantity restriction

• Higher capacities and longer run-times

• Draw up to 12A when linked, ideal forHD or 3D camera set-ups

• Built-in run-time indication

• Compatible with all viewfinder capacityindication systems

• Hot-swap the rear battery while linkedfor constant power

• Charge batteries individually or linked usingany reputable V-Mount charger

• Improved low-temperature performance

PL96T Time Battery V-Mount• 14.8V 6.5Ah, 96 Watt-Hours• Max discharge 8A (12A when

linked)• Numeric LCD run-time indicator• Compatible with all viewfinder

capacity displays• Chargers: Cube (9702V), RMC4X

(9702VR), V2 (9613V) or Sony &IDX equivalents

• 133 x 84 x 50mm / 0.73kg

Model 9304

Power for all CamerasPAGlink is a one-system power solution for allprofessional cameras. It has been designed topower the full range of equipment used bybroadcast stations, hire facilities andproduction companies, such as HD DSLRs,handheld camcorders, broadcast cameras andhigh-end HD digital cinematography and 3Dcamera setups.

Smarter, Smaller, LighterPAGlink V-Mount Li-Ion batteries link togetherto multiply capacity and run-time, allowinghigher-currents to be drawn. PAGlink is a

Comparison of Linking Battery Systems:

IDX Powerlink HL9 PAGlink PL96e

Capacity 88Wh 96Wh

Current Draw 10A 12A

High-current No Yespin contacts

Run-Time Indication No Yes

Viewfinder Display IDX only Sony, IDX,Anton-Bauer & Red

Number of batteries 2 8that can be linked

Weight 0.74kg 0.73kg

Dimensions 140 x 85 x 58mm 133 x 84 x 50mm

Charge linked No Yes

External linking latch No Yes

system of smarter, smaller and lighterbatteries, with a greater energy density thanother linking battery systems. These high-quality, 96 watt-hour battery packs areindependently UN tested, fully IATA compliant,and can be legally transported by passengeraircraft to any location, without quantityrestriction.

Link Multiples of BatteriesPAGlink batteries incorporate heavy dutycontacts, engineered for high-drainapplications. It is the only system that allowsyou to link multiples of batteries; two, three or

PL96e Battery V-Mount• 14.8V 6.5Ah, 96 Watt-Hours• Max discharge 8A (12A when

linked)• 5 LED run-time indicator• Compatible with all viewfinder

capacity displays• Chargers: Cube (9702V), RMC4X

(9702VR), V2 (9613V) or Sony &IDX equivalents

• 133 x 84 x 50mm / 0.73kg

Model 9303

more on your camera. Three linked batteries,weighing less than 2.2kg, create a single unit ofnearly 20Ah (288 watt-hours), greatlyextending run-time, and allowing up to 12Acurrent to be drawn.

Intelligent NetworkThe PAGlink system creates an intelligentnetwork enabling batteries to communicate andoperate seamlessly as one. This unique systemallows batteries to be charged as well asdischarged whilst linked. The collective state-of-charge can be communicated automaticallyto any viewfinder information system.

PAGlink High-Power Linking Batteries

PAG L95e V-Mount• 14.8V 6.5Ah, 95Wh• Max discharge 7A• 5 LED run-time indicator• Capacity displayed in Sony

viewfinder• Chargers: Cube (9702V), RMC4X

(9702VR), V2 (9613V) andSony Li-Ion

• 130 x 86 x 47mm / 0.75kgModel 9310V

PAG L95eR V-Mount• 14.8V 6.5Ah, 95Wh• Max discharge 7A• 5 LED Run-Time indicator• Capacity displayed in Red One

viewfinder• Chargers: Cube (9702V), RMC4X

(9702VR), V2 (9613V)• 130 x 86 x 47mm / 0.75kgModel 9310R

PAG L95e PAGlok• 14.8V 6.5Ah, 95Wh• Max discharge 7A• 5 LED Run-Time indicator• Chargers: Cube (9702), RMC4X

(9702R) AR124PLD, Quasar(9726, 9752), Freelancer

• 130 x 86 x 42mm / 0.75kgModel 9310

PAG L95e Snap-on• 14.8V 6.5Ah, 95Wh• Max discharge 7A• 5 LED Run-Time indicator• Capacity displayed in camera

viewfinder via the Anton BauerInterActive feature

• Chargers: Pulsar (9795) Quasar(9727, 9753), Anton-Bauer Li-Ion

• 130 x 86 x 52mm / 0.76kgModel 9310A



The ‘MINS’ LED then flashes twice. The number of minutes is indicated:1 LED = 10 mins.

5 LED Capacity and Run-Time IndicatorCapacity is displayed as a percentage, each LED = 20% approx.1 LED flashing = less than 10% of capacity available.

• Low-cost, high-quality Li-Ion broadcast batteries

• High-capacity and long-life cells

• 5 LED capacity and run-time display

• Viewfinder capacity indication

• V-Mount, PAGlok and Snap-on models

• Advanced electronic protection system

• Circuits Parylene coated

• No service charge required

• Reset after cut-out with display button

• Combine capacities to create a 190Wh powersource using a PAG Power Plate

• UN tested and IATA compliant

• 18 month warranty

8

PAG L95e low-cost Li-Ion batteriesBa

tterie

s

PAG L95 V-Mount• 14.8V 6.5Ah, 95 Watt-Hours• Max discharge 7A• Power & Time Display: run-time indication

with 1 minute resolution• Chargers: Cube (9702V), RMC4X (9702VR),

V2 (9613V), Sony Li-Ion• 130 x 86 x 47mm / 0.75kgModel 9360

PAG L110 V-Mount• 14.8V 7.5Ah, 110 Watt-HoursModel 9302V

PAG L95 PAGlok• 14.8V 6.5Ah, 95 Watt-Hours• Max discharge 7A• Power & Time Display: run-time indication

with 1 minute resolution• Chargers: Cube (9702), RMC4X (9702R)

AR124PLD, Quasar (9726, 9752), Freelancer• 130 x 86 x 42mm / 0.75kgModel 9382

PAG L110 PAGlok• 14.8V 7.5Ah, 110 Watt-HoursModel 9302

PAG Time Batteries The industry’s premier batteries

PAG L95 Snap-on• 14.8V 6.5Ah, 95 Watt-Hours• Max discharge 7A• Power & Time Display: run-time indication

with 1 minute resolution• Chargers: Pulsar (9795), Quasar (9727, 9753)• 130 x 86 x 52mm / 0.76kgModel 9383

PAG L110 Snap-on• 14.8V 7.5Ah, 110 Watt-HoursModel 9302A

PAG Time Batteries incorporate a numeric LCD that displays remaining run-time and battery capacity.At the press of a button it shows run-time against load...

...followed by percentage (1%increments).

...followed by minutes....in hours... Available capacity is alsodisplayed, in ampere-hours(0.1Ah increments)...

• The highest quality broadcast batteries


• Power & Time Display, resolution of1 minute, 0.1Ah and 1%

• V-Mount, PAGlok and Snap-on models

• 95Wh and 110Wh models

• Advanced electronic protection system


• Choose to maximise capacity or cyclelife when charging with PAG chargers

• Combine capacities to create a 190Whor 220Wh power source using a PAGPower Plate

• UN tested and IATA compliant

• 2 year warranty

9

Batteries

PAG L190e More power for HD set-ups

• High-quality Li-Ion battery for high-definition cameras and accessories

• Designed for 10A current loads

• 190 watt-hour capacity

• High-capacity and long life cells

• 5 LED capacity and run-time display

• Viewfinder capacity indication

• V-Mount and PAGlok models

• Electronic protection system


• No service charge required

• Reset after cut-out with display button


Air TransportationThe PAG L190e has a capacity above 160Wh and is therefore unsuitablefor transportation by passenger aircraft. For this reason PAG has limitedthe availability of the L190e to customers in the UK and mainlandEurope. A capacity of 190Wh can be achieved by linking two new 96WhPAGlink batteries. These batteries can be legally transported bypassenger aircraft without quantity restriction.

PAG L190e V-Mount• 14.8V 13Ah, 190 Watt-Hours• Max discharge 10A• 5 LED Run-Time Indicator• Displays capacity in either Sony or Red One

camera viewfinder• Chargers: Cube (9702V), RMC4X (9702VR),

V2 (9613V), Sony Li-Ion• 175 x 125 x 53mm / 1.47kgModel 9365V

Charger CompatibilityIf your charger has NOT been updated for charging the PAG L95e, thefollowing chip-updates are available that will enable you to charge boththe L190e and the L95e:Model 9670E for AR Series 2 chargersModel 9670QE for Quasar chargersFreelancer chargers must be returned to PAG to receive the update.

PAG L190e PAGlok• 14.8V 13Ah, 190 Watt-Hours• Max discharge 10A• 5 LED Run-Time Indicator• Chargers: Cube (9702), RMC4X (9702R)

AR124PLD, Quasar (9726, 9752), Freelancer• 175 x 125 x 45mm / 1.44kgModel 9365



The ‘MINS’ LED then flashes twice. The number of minutes is indicated:1 LED = 10 mins.

5 LED Capacity and Run-Time IndicatorCapacity is displayed as a percentage, each LED = 20% approx.1 LED flashing = less than 10% of capacity available.

10

Batte

ries

PAG ZL-150 V-Mount• 14.4V 10Ah, 150 Watt-Hours• Max discharge 10A• Chargers: Cube (9702V), RMC4X

(9702VR), V2 (9613V)• 208 x 125 x 52mm / 2.35kgModel 9316V

PAG ZL-150 PAGlok• Chargers: Cube (9702), RMC4X

(9702R), AR124PLD, Quasar(9726, 9752), Freelancer

• 208 x 125 x 44mm / 2.35kgModel 9316


(9702R) AR124PLD, Quasar(9726, 9752), Freelancer

• 208 x 125 x 44mm / 2.2kgModel 9317

PAG ZL-125 V-Mount• 13.2V, 125 Watt-Hours• Max discharge 10A• Power & Time Display: run-time

with 1 minute resolution• Chargers: Cube (9702V), RMC4X



(9702R), AR124PLD, Quasar(9726, 9752), Freelancer

• 130 x 86 x 42mm / 0.88kgModel 9315

PAG ZL-50 V-Mount• 14.4V 3.2Ah, 50 Watt-Hours• Max discharge 7A• 4 LED capacity indicator• Chargers: Cube (9702V), RMC4X


PAG ZL-Series Zero-Lithium Travel-Packs

• Zero-Lithium travel packs enable you toavoid air-travel restrictions on batteries

• 10A current draw capability

• 150Wh, 125Wh or 50Wh capacities

• High-capacity and long-life Ni-MH cells

• Power & Time Display, resolution of 1 minute,0.1Ah and 1% (ZL-125 only)

• V-Mount, PAGlok and NP1 models


PAG ZL-NP• 13.2V 3Ah, 40 Watt-Hours• Max discharge 7A• 4 LED capacity indicator• Chargers: AR124NPD (9793)• 71 x 182 x 25mm / 0.73kgModel 9314

The Latest Ni-MH TechnologyPAG ZL-Series batteries employ the latest Ni-MH cell-technology,which has greatly improved since its introduction to the industryapproximately a decade ago. Customers can now expect a longercycle life, if batteries are always charged with PAG chargers.

Air TransportationCertain airlines have refused to let Li-Ion ENG batteries on-boardaircraft in hand luggage, despite legitimate air safety certification thatproves compliance with IATA regulations for lithium content and UnitedNations testing. For this reason, PAG has introduced ZL-Series TravelPacks, a range of flight-friendly batteries that contain zero-lithium, andare always welcome aboard.

11

Batteries

Ouput from the the Pagbelt NMH is via twoXLR4F connectors

Pagbelt NMH For broadcast cameras or 24V/30V lighting

• High-quality Ni-MH battery belts

• Top-quality, deep-moulded leatherpockets

• 12V, 13.2V, and 14.4V models forpowering lighting and cameras

• 24V and 30V models for poweringlighting


• Over-Discharge Protection preventscell imbalance and extends battery life

• Integral overnight charger

• Widerange AC input for worldwideoperation

• 10 year warranty on leather cases

Fast-charge the 24V and 30V Pagbelt NMHusing PAG 30V AR Series chargers (single-channel Model 9763, and four-channelModel 9765)

Pagbelt NMH 24V 10Ah• 24V 10Ah, 240 Watt-Hours• Output via 2 x XLR4 connectors• Over-discharge protection• Integral Overnight Charger (100V-250V AC

input)• Fast-chage using a PAG 30V AR Series

charger and charge lead XLR4F to XLR4MModel 9449

• Clip-on shoulder harness included• 4.7kgModel 9224

Pagbelt NMH 30V 10Ah• 30V 10Ah, 300 Watt-Hours• 5.5kgModel 9230

Pagbelt NMH 12V 10Ah• 12V 10Ah, 120 Watt-Hours• Output via 2 x XLR4 connectors• Over-discharge protection• Integral Overnight Charger (100V-250V AC

input)• Fast-chage using any PAG universal charger

and charge lead PP90M to XLR4M Model9455

• 2.6kgModel 9212

Pagbelt NMH 13.2V 10Ah• 13.2V 10Ah, 132 Watt-Hours• 2.8kgModel 9213

The Latest Ni-MH TechnologyPagbelt NMH battery belts employ the latestNi-MH cell-technology, which has greatlyimproved since its introduction to theindustry approximately a decade ago.Customers can now expect a longer cyclelife, if the battery belt is always charged withPAG chargers.

Pagbelt NMH 14.4V 10Ah• 14.4V 10Ah, 144 Watt-Hours• 3.0kgModel 9213

12

Batte

ries

PAG chargers are the secret to extended battery life

PAG Advanced Charging SystemsPAG is the pioneer of microcomputer-controlled fast-charging forbroadcast industry batteries. PAG chargers are the most versatile andadvanced battery management systems available; they are easy tooperate and the latest models are fully automatic.

The proprietary software that controls the charging process will extendthe working life of your batteries beyond anything that can be achievedusing other systems.

PAG’s latest chargers incorporate iPC Intelligent Parallel Charging,designed for the simultaneous fast-charging of PAG, Sony and IDXLi-Ion batteries.

PAG ACS is a sequential Advanced Charging System suitable for fast-charging PAG Li-Ion batteries as well as Ni-MH and Ni-Cd batteries ofany reputable manufacturer.

PAG Intelligent Parallel ChargingPAG’s unique Intelligent Parallel Charging software incorporates threephases. First it prepares batteries which are shut down or deeplydischarged for charge acceptance. Then it determines the type and state-of-charge of the batteries, and the maximum current that can be applied.Finally, it shares the current intelligently between the channels, brieflyaddressing the most discharged batteries first, before simultaneouslyfully-charging all batteries as quickly and efficiently as possible.

PAG Advanced Charging SystemPAG introduced accurate fast-charging for broadcast camera batterieswhen it was thought wrongly to be damaging. The PAG ACS software hasevolved over time as new battery technologies have been adopted by theindustry. PAG ACS chargers are intelligent, requiring only the positive andnegative connections to analyse the battery and apply and monitor thecharging process.

Fast-Charge TerminationTo perform properly, batteries must be charged by exactly the rightamount. Undercharging gives less than full capacity and a shorterrun-time, whereas overcharging can permanently damage the battery.To ensure that the fast-charge current is stopped at the correct time,and in order to detect the many varied problems associated with faultybatteries, the PAG ACS microcomputer uses a combination of severalcut-off algorithms. The software developed to do this is the mostpowerful and complex part of the PAG ACS charger.

Automatic Charge-Rate SelectionIn acknowledgement of the wide variety of batteries that are available tothe camera operator, PAG has incorporated further revolutionary softwarein its chargers that provides an easy and efficient system of batterymanagement. When a battery is connected to the charger, a period ofanalysis ensues in order to detect the battery’s cell-chemistry, state-of-charge, capacity and condition. The charger then automatically appliesthe correct regime to achieve a fully charged battery with the maximumcapacity and cycle life.

A Variety of FeaturesThe features of each PAG charger can vary to include either 2 or 4channels, a built-in camera power supply or special charging programs.

Discharge/ChargeBatteries which have been repeatedly subjected to partial discharging willbenefit from the analytic Discharge/Charge program which also measuresand displays available battery capacity.

Li-Ion RecoveryPAG chargers will automatically recover PAG Li-Ion batteries when theoutput has been shut down by the battery’s internal protection circuit.

Recovery ChargeThe Recovery Charge Program can be used to regain battery capacity lostas a result of extended storage or operation under adverse conditions.

Maintenance ChargeAn automatic Maintenance Charge is applied to Ni-Cd and Ni-MH batteries,after full charging, to keep them in peak condition and ready for instantuse. This program is not required for Li-Ion batteries.

Information DisplaysLarge backlit LCD displays indicate the status of the battery and thecharger, providing information such as charge loaded and battery voltage.

AC Camera PowerSeparate Camera Power Adaptors are available for use with the Cubechargers that enable you to power your camera from an AC mains supply.The PAG CPA outputs approximately 100W and is suitable for use withmodern broadcast cameras which can be powered by 14.8VLi-Ion batteries.

Certain Quasar charger models incorporate a Camera Power Supply thatprovides a nominal 50W suitable for powering most professionalbroadcast cameras. In power supply mode the Quasar displays anaccurate digital bar-graph of power consumption.

Charge a Greater Variety Of BatteriesThe latest PAG Cube chargers will simultaneously fast-charge PAG, Sonyand IDX Li-Ion batteries, as well as sequentially charging Ni-MH and Ni-Cdbatteries of any reputable manufacturer within the ranges 4.8V to 14.8V,1Ah to 10Ah. PAGlok and V-Mount models are available.

PAG Universal Chargers are available with a variety of battery connections:PAGlok, V-Mount, Snap-on (for PAG Snap-on batteries only) and NP1pockets. They incorporate PP90 sockets on their front panels, and arecapable of charging a great variety of batteries, within the chargers broadrange, via the appropriate charge adaptor.

ConstructionPAG chargers are designed for location use. They are quiet, cool-runningand have a lightweight impact-resistant moulded construction. The latestCube models incorporate an aluminium frame and a strong, moulded,retractable handle that enables you to carry the charger with four batteriesconnected.

All PAG chargers are designed to high electrical standards, with RFIcertification, and are suitable for use in all broadcast environments.

PAG charging systems automatically adjust to operate from AC mainssupplies worldwide.

13

Chargers

Chargers

PAG Cube A high-powered simultaneous Li-Ion charger

Intelligent Parallel ChargingThis high-powered charger iscapable of supplying 6A at 16.8V,approximately 100W. Charging isfast, efficient and fully-automaticthanks to PAG's unique IntelligentParallel Charging. PAG iPCsoftware incorporates threephases:

Phase 1 Pre-Charge:Prepares batteries that have beenshut down or deeply dischargedfor charge acceptance.

Phase 2 Testing:Determines the type and state-of-charge of the batteries, and themaximum current that can beapplied.

Phase 3 Charging:The charger then shares thecurrent intelligently between thechannels, briefly addressing themost discharged batteries first,before simultaneously fully-charging all batteries as quicklyand efficiently as possible.

PAG Cube PAGlok• 4 x PAGlok connectors• Intelligent Parallel Charging for

latest PAG Li-Ion batteries• Sequential charging for older

PAG Li-Ion batteries, Ni-MH andNi-Cd batteries in the ranges:4.8V to 14.8V, 1Ah to 10Ah

• 157 x 150 x 150mm / 1.19kgModel 9702

PAG Cube V-Mount• 4 x V-Mount connectors• Intelligent Parallel Charging for

latest PAG, Sony and IDX Li-Ionbatteries

• Sequential charging for olderPAG Li-Ion batteries, and Ni-MHbatteries

• 157 x 157 x 157mm / 1.19kgModel 9702V

PAG CPA V-Mount• AC Camera Power Adaptor for

use with V-Mount Cube Charger• Suitable for powering all

modern broadcast cameras• Outputs 100W (16.8V at 5.5A)• Requires Model 9450 XLR4

male to female connector• 130 x 86 x 47mm / 0.02kgModel 9701V

PAG CPA PAGlok• AC Camera Power Adaptor for

use with PAGlok Cube Charger• Suitable for powering all

modern broadcast cameras• Outputs 100W (16.8V at 5.5A)• Requires Model 9450 XLR4

male to female connector• 130 x 86 x 47mm / 0.02kgModel 9701

• Low-cost simultaneous charger forPAG, Sony & IDX Li-Ion batteries

• PAG Intelligent Parallel Charging

• High-power 100W output


• Backlit LCD screen

• Ultra-compact, lightweight androbust construction

• Quiet and cool-running

• Retractable handle

• Ideal for location use

• Accepts firmware upgrades viabattery connectors

• Worldwide operation

14

Char

gers

PAG RMC4X Rack-mountable battery charger for OB Vehicles

RMC4X-P Charger PAGlok• 4 x XLR4 to PAGlok charging connectors• Intelligent Parallel Charging for latest PAG

Li-Ion batteries• Sequential charging for older PAG Li-Ion

batteries, and Ni-MH & Ni-Cd batteries in theranges: 4.8V to 14.8V, 1Ah to 10Ah

• 210 x 201 x 44mm / 1.8kgModel 9702R

RMC4X-V Charger V-Mount• 4 x XLR4 to V-Mount charging connectors• Intelligent Parallel Charging for latest PAG,

Sony and IDX Li-Ion batteries• Sequential charging for older PAG Li-Ion

batteries, and Ni-MH batteries• 210 x 201 x 44mm / 1.8kgModel 9702VR

• Simultaneous charger for PAG, Sony& IDX Li-Ion batteries

• PAG Intelligent Parallel Charging

• High-power 100W output


• Backlit LCD screen

• 1 unit fits in a 9.5” rack and 2fit side-by-side in full 19” rack

• Measures 1U high

• Ideal for use in outside broadcastvehicles or workshops

• Quiet and cool-running

• Accepts firmware upgrades viabattery connectors


Two Units Fit a 19” RackThe RMC4X is designed to be mounted in ahalf-width (9.5”) racking system, andmeasures 1U high. However, two units canbe mounted side by side in a standard full-width 19-inch rack, by using connectingplates, available from PAG.

The charging connectors can be verticallymounted alongside the rack.

15

Chargers

Battery Charging Connectors• The RMC4X Charger is configured for use

with either V-Mount or PAGlok batteries• Each charger is supplied with four battery

charging connectors that incorporate a 1mlong cable terminated with an XLR4connector, suitable for connection to theXLR4 sockets situated on the back panel ofthe charger

• PAG is able to provide a mounting board forthe charging connectors, made to yourspecification, at an additional cost

PAG Universal Chargers Charge a broader range of batteries

AR124PLD PAGlok• 4 x PAGlok connectors, 4 x PP90 sockets• Sequentially charges PAG Li-Ion batteries,

Ni-Cd and Ni-MH batteries in the ranges4.8V to 14.8V, 1Ah to 10Ah

• Discharge/Charge Program• 82 x 168 x 240mm / 1.23kgModel 9792

Pulsar Snap-on• 4 x Snap-on connectors, 4 x PP90 sockets• Sequentially charges PAG Li-Ion batteries,


• Discharge/Charge Program• Talk-Circuits communicate with L95 Time

Battery Model 9383• 82 x 168 x 240mm / 1.23kgModel 9795

Quasar PAGlok• 2 x PAGlok connectors, 2 x PP90 sockets• Sequentially charges PAG Li-Ion batteries,


• 72 x 135 x 185mm / 0.88kgModel 9726• Incorporating 50W camera power supplyModel 9752

Quasar Snap-on• 2 x Snap-on connectors, 2 x PP90 sockets• Sequentially charges PAG Li-Ion batteries,


• 80 x 135 x 185mm / 0.84kgModel 9727• Incorporating 50W camera power supplyModel 9753

AR124NPD NP1• 4 x NP1 pockets, 4 x PP90 sockets• Sequentially charges PAG Li-Ion batteries,


• Discharge/Charge Program• 78 x 142 x 240mm / 1.07kgModel 9793

• Sequential, all-chemistry chargers fora broad range of batteries

• 4.8V to 14.8V, 1Ah to 10Ah

• PAGlok, Snap-on and NP1 models

• Front PP90 sockets allow thecharging of batteries via PAGcharge adaptors

• 2 or 4 channels

• PAG ACS microcomputer-controlled charging extendsbattery life

• Recovery Charge regainscapacity lost during storage

• Li-Ion battery recovery

• Backlit LCD screen display battery status

• Forward compatible via chip-upgrade kits

Discharge/Charge ProgramFour-channel models feature PAG’s analytic Charge/Discharge program,which ‘repairs’ batteries that have been repeatedly subjected to partialdischarging. The program measures and displays battery capacity.

High Build StandardPAG universal chargers are designed to high electrical standards, with RFIcertification, and are suitable for use in all broadcast environments.

Auto Charge-Rate SelectionThis feature provides the easiest and most efficient way ofmanaging batteries that vary in terms of cell chemistry, voltageand capacity. The program detects the battery’s cell chemistry,state-of-charge, capacity and condition, and then applies thecorrect regime to achieve a fully charged battery with themaximum capacity and cycle life. The charge rate can also bemanually set at 2A, 3A or 4A.

16

Char

gers

PAG Freelancer and V2 Low-cost chargers

V2 Charger V-Mount• 2 x V-Mount connectors• Sequentially charges PAG and Sony V-Mount

Li-Ion and Ni-MH batteries• 72 x 112 x 133mm / 0.43kgModel 9613V

Freelancer PAGlok• 2 x PAGlok connectors• Sequentially charges PAGlok Li-Ion, Ni-MH

and Ni-Cd batteries in the ranges 12V to14.8V, 1.5Ah to 10Ah

• 55 x 115 x 135mm / 0.41kgModel 9613

• Sequential, all-chemistry chargers for PAG Li-Ion,Ni-Mh and Ni-Cd batteries

• 12V to 14.8V, 1.5Ah to 10Ah


• Fully-automatic

• 2 channels

• PAG ACS microcomputer-controlledcharging extends battery life

• Li-Ion battery recovery

• LED display indicates battery status

• Ultra-compact and lightweight


• Forward compatible via chip-upgrade kits

17

Vehicle Battery Power Converter• A DC/DC Converter that enables you to

power a PAG charger from your vehicle’sbattery, via the cigar lighter socket

• Suitable for use with PAG AR Series 2,Freelancer, Quasar and Pulsar chargers

• 111 x 60 x 30mm / 500gModel 9774

AR Series 2 Chip Update• Chip-update for charging the L95e and

L190e batteries• For AR Series 2 chargers 9792, 9793, 9794

and 9795 (green or yellow labels)Model 9670E

Quasar Chip Update• Chip-update for charging the L95e and

L190e batteries• For Quasar chargersModel 9670QE

Charger Chip UpdatesVehicle Power

Chargers

XLR4M to XLR4F Straight• Charging cable for 30V AR Series Chargers• Lead length 1mModel 9449

XLR4M to XLR4F Coiled• Cable for connecting the PAG Camera Power

Adaptor to the camera• Lead length 650mmModel 9450

PP90M to XLR4M• Charging cable for 30V AR Series Chargers• Lead length 1mModel 9455

PP90M to PAGlok• For charging PAGlok batteries via the front

PP90 sockets of PAG Universal Chargers(AR Series 2, Pulsar and Quasar)

• Lead length 370mmModel 9514

PP90 In-line SocketModel 9686

XLR4F to PAGlok• For charging PAGlok batteries via the front

XLR4 sockets of PAG 30V AR Series chargers• Lead length 450mmModel 9520

XLR4F to NP1• For charging NP1 batteries via the front

XLR4 sockets of PAG 30V AR Series chargers• Lead length 400mmModel 9579

PP90M to NP1• For charging NP1 batteries via the front PP90

sockets of PAG Universal Chargers(AR Series 2, Pulsar and Quasar)


PP90M to XLR4F• Lead length 150mmModel 9687

PAG Charge Adaptors & Cables/Connectors

18

PP90M to V-Mount (Intelligent)• Incorporates circuits required for charging

Sony Li-Ion batteries via the front PP90sockets of PAG Universal Chargers(AR Series 2, Pulsar and Quasar)


PP90M to V-Mount• Charge Adaptor for PAG V-Mount compatible

batteries, for charging via the front PP90sockets of PAG Universal Chargers(AR Series 2, Pulsar and Quasar)


PP90M to Snap-on• Charge Adaptor for PAG Snap-on compatible

batteries, for charging via the front PP90sockets of PAG Universal Chargers(AR Series 2, Pulsar and Quasar)


Char

gers

Paglights Award-winning camera lights

The Broadcast Industry’s first dedicated camera lightThe Standard 12V Paglight was the first on-board camera lightdesigned specifically to meet the requirements of the broadcastindustry. PAG now offers a family of lights, designed to fulfil avariety of professional requirements, but sharing many of theunique features that made Paglight the industry standard.

Halogen, HMI and LEDPaglights are robust, light-in-weight, cool-running and fully-focusable. Their versatility has been achieved as a result of PAG’spatented plug-in lamp holder feature. This is best illustrated in theStandard 12V Paglight which is capable of tungsten halogen output,metal-halide arc and LED.

LED Technology has gradually improved, addressing the problemsthat early examples displayed, such as poor spectral distributionand colour temperature. Using improved LED technology, PAGoffers a plug-in LED option for the Paglight, to further increase itsversatility and provide you with the most economical LED solution.

Plug-in lamp holder options for this light also include Softstart,for use with Li-Ion batteries, and the power saving, regulatedPowerMax unit, which incorporates a dimming facility calledVariLux.

Smaller lights for smaller camerasThe Mini Paglight was introduced to suit the dimensions of thesmaller, digital camcorders. This miniaturised version of the 12VPaglight can be powered from a range of 12V to 14.8V batterypacks and belts. The plug-in PowerArc option makes the MiniPaglight the industry’s most compact yet powerful arc light.A Softstart lamp holder is also available for use with Li-Ionbatteries. The Mini Paglight can be mounted to the camerausing a variety of detachable power bases (see Page 25).

For users of small, handheld camcorders, whether professional orconsumer, the Paglight C6 Kit is an ideal solution. This high-quality6V system provides everything you need: Paglight, diffuser,dichroic, barn doors, battery and charger at a price to suit anyequipment budget (see Page 26).

250W handheld location lightingThe Paglight 250W is an ideal ‘basher’ or fill-light, available in 24Vand 30V models. It can be used hand-held or stand-mounted onlocation and incorporates many of the features of the StandardPaglight: quick and easy lamp-changing, detachable power baseand a range of accessories (see Page 27).

Standard Paglight (12V)• The original halogen or arc

12V broadcast camera lightis now LED also (Page 18).

Dimensions:• 70mm wide x 103mm long

x 115mm high• Reflector size: 45mm dia.

Mini Paglight (12V)• Miniaturised version of the

12V Paglight for use withsmaller digital camcorders.Features detachable powerbase (Page 25).



Paglight C6 Kit (6V)• An all-inclusive 6V lighting

kit, incorporating 6V batteryand charger, designed foruse with small camcorders(Page 26).



Paglight 250W• A 250W hand-held location

fill-light or ‘basher’ availablein 24V and 30V models(Page 27).

Dimensions:• Reflector size: 60mm dia.

19

Lighting

Lighting

Used throughout the world by news broadcasting organisations andvideographers, Paglights are the ultimate in camera lighting

surge from activating theover-current protection circuitswithin Li-Ion batteries. (This is notrequired when using the lampoutput on a Sony camera).

PowerMaxControl/VariLuxA voltage regulatedunit that prolongsbattery run-time and saveshalogen lamp filament life. VariLuxis a lamp dimming facility whichalso conserves battery power.

PowerArcPaglight can beinstantly convertedto HMI by plugging-in the PowerArc unit.The unit consumes only 32W butprovides the equivalent of almost100W tungsten, but at daylightcolour temperature.

LED DimmerThe highlyenergy efficientplug-in LED moduleconsumes only 11W,greatly extending battery run-time.The LED Dimmer Unit has a colourtemperature that matches daylightand an output of 850 lux at 2m.The LED Unit’s dimming facilityenables you to control light

Standard Paglight (12V) The industry standard

Halogen, HMI or LED - Paglight does it all

Plug-in LED Dimmer Unit

intensity, in addition to Paglight’sspot and flood capability.

Rotatable Accessory KitThis accessory ringholds any combin-ation of snap-inaccessories,including barn doors(tapered or parallel),dichroic filters thatcorrect the colour temperatureof the output, and a diffuser.The accessory ring is expanded tofit over the front of the light, can berotated 360° to achieve the desiredconfiguration, and then tightenedto maintain its position.

Softlight Diffuser & Filter KitThis kit includes a filter holdingassembly that fits onto the barndoors of any Standard or MiniPaglight (including Paglight C6).It enables you to attach a super-soft light diffuser screen or colourcorrection filters.

Revolutionary by DesignPaglight is a revolutionary cameralight, the first specifically designedto suit professional ENG/EFPrequirements, and answer the manyrequests for an all-embracing,single operator camera light.

Fully FocusablePaglight is continuously focusablewith a beam angle that is variablefrom spot to flood. It has a soft,even spectral distribution with nohot spots or flaws.

Cool and VersatilePAG's unique patented designmakes Paglight the coolestrunning and most versatile cameralight in the industry. Interchange-able plug-in lamp holders fit intothe back of the lamp body. Variantsof wattage and unit type can beexchanged without handling thelamp. There are five different lampholder options available.

Standard Halogen Lamp HolderAccepts 20W, 35W, 50W, 75W and100W tungsten halogen bi-pinlamps.

SoftstartA halogen lampholder that preventsthe cold lamp start-up

20

Paglight Power BasesLow-profile, hot-shoe Power Basesenable the Paglight to be easily andquickly mounted to the camera, orremoved after shooting. PowerBases are available with a choice ofconnector, such as PP90, D-Tapand XLR4. Various lead lengths areavailable, suitable for use withmost cameras. The base allows thePaglight to be mounted to thecamera via a variety of mountingoptions suitable for all Paglights,including an extender arm and acamera clamp (see Page 28).

Ligh

ting

Paglight LED (D-Tap/150mm)• LED Dimmer unit• Hot-shoe Power Base with a D-Tap connector

(lead length 150mm) for use with light outputon Sony cameras

• Stud Adaptor & Shoe PlateModel 9966LD

Paglight LED (PP90)• LED Dimmer unit• Hot-shoe Power Base with a PP90 connector

(lead length 500mm) for use with light outputon a PAGlok Connector


Paglight LED (D-Tap/500mm)• LED Dimmer unit• Hot-shoe Power Base with a D-Tap connector

(lead length 500mm) for use with the lightoutput on an Anton-Bauer battery mount


LED

Paglight LED (XLR4)• LED Dimmer unit• Hot-shoe Power Base with an XLR4 connector

(lead length 1.5m) for use with XLR4 outputon camera or Pagbelt NMH


LED Accessory Kit• LED to halogen conversion filter• Diffuser• 2 x parallel barn doors• 360° Rotatable accessory ringModel 9959D

Paglight Softstart (D-Tap/500mm)• Softstart halogen lamp holder suitable for use

with Li-Ion batteries• Hot-shoe Power Base with a D-Tap connector

(lead length 500mm) for use with the lightoutput on an Anton Bauer battery mount

• 20W or 35W lamps required• Stud Adaptor & Shoe PlateModel 9945

Paglight Standard (D-Tap/150mm)• Standard halogen lamp holder (Sony camera

has Softstart function for use with Li-Ionbatteries)

• Hot-shoe Power Base with a D-Tap connector(lead length 150mm) for use with the lightoutput on Sony cameras


Paglight Softstart (PP90)• Softstart halogen lamp holder suitable for use

with Li-Ion batteries• Hot-shoe Power Base with a PP90 connector

(lead length 500mm) for use with the lightoutput on a PAGlok Connector


Paglight Standard (D-Tap/500mm)• Standard halogen lamp holder suitable for use

with Ni-MH or Ni-Cd batteries• Hot-shoe Power Base with a D-Tap connector


• Stud Adaptor & Shoe PlateModel 9965

Standard Paglight (12V)

LED LED

LED LED HAL

HAL HAL HAL

21

Lighting

Standard Paglight (12V)

Paglight PowerMax (PP90)• PowerMax halogen lamp holder that provides

voltage regulation for longer battery run-time,and a dimming facility

• Suitable for use with Ni-MH or Ni-Cd batteries• Hot-shoe Power Base with a PP90 connector



Paglight Standard (XLR4)• Standard halogen lamp holder suitable for

use with Ni-MH or Ni-Cd batteries• Hot-shoe Power Base with an XLR4 connector

(lead length 1.5m) for use with the XLR4output on a Pagbelt NMH


Paglight PowerMax (D-Tap/500mm)• PowerMax halogen lamp holder that

provides voltage regulation for longer batteryrun-time and a dimming facility

• Suitable for use with Ni-MH or Ni-Cd batteries• Hot-shoe Power Base with a D-Tap connector



Paglight PowerMax (XLR4)• PowerMax halogen lamp holder that provides

voltage regulation for longer battery run-timeand a dimming facility

• Suitable for use with Ni-MH or Ni-Cd batteries• Hot-shoe Power Base with an XLR4 connector

(lead length 1.5m) for use with the XLR4output on a Pagbelt NMH


Paglight Standard (PP90)• Standard halogen lamp holder suitable for

use with Ni-MH or Ni-Cd batteries• Hot-shoe Power Base with a PP90 connector



Halogen Accessory Kit• Halogen to daylight conversion filter• Diffuser• Parallel barn doors• 360° Rotatable accessory ringModel 9959

HAL HAL HAL

HAL HAL HAL

22

Ligh

ting

Standard Paglight (12V) Accessories

23

9963 TaperedBarn Doors

9955 PowerArc

9967 Arc Lamp

9983 Softlight Diffuserand Filter Kit for ultra-softor colour lighting effects.Comprises:2 x Filter holders2 x Softlight diffusers2 x Full CT blue filters2 x Half CT blue filters2 x Half CT orange filters(See price list for ModelNos. of individual parts).

9953Rotatable

Accessory Holder

9958 PowerMax/VariLux

9938 Softstart

9950 Standard Lamp Holder

9962 D-Tap Power Base (150mm)

9968 Lamp

9930 20W

9931 35W

9912 50W

9932 75W

9911 100W

9987 Base Locking Adaptor


9957 PP90 Power Base (500mm)

9960 XLR4 Power Base (1.5m)

9959 RotatableAccessory Kitfor halogenPaglights9959D RotatableAccessory Kitfor LED Paglights

Registered Design No. 2071515, Patent No. 2335027

9954 ParallelBarn Doors

9997D LED Dimmer Unit

9951 DichroicFilter (halogen

to daylight)

9973 PowerArcConversion Filter

(PowerArc tohalogen)

9952 Diffuser9998 LEDConversion Filter(LED to halogen)

12V Lamps

See Universal Mounting Options on Page 28

Power-to-light Adaptors

PAG PTLA (PAGlok)• Power interface for a 12V

Standard Paglight enabling it tobe powered using a PAGlokbattery

Model 9991• For 12V Mini PaglightModel 9994

PAG PTLA (V-Mount)• Power interface for a 12V

Standard Paglight enabling it tobe powered using a V-Mountbattery

Model 9991V• For 12V Mini PaglightModel 9994V

Location Lighting Power InterfacePAG Power-to-light Adaptors are aconvenient, alternative way ofpowering and positioning anadditional light source on location.The PTLA is a power interface thatconnects the 12V StandardPaglight to the battery. The batteryacts as a stable support base forthe Paglight and enables it to bepositioned on any convenient flatsurface, such as a table top orbook shelf.

Models are also available for usewith the 12V Mini Paglight.

PAG PTLA (Snap-on)• Power interface for a 12V

Standard Paglight enabling it tobe powered using a PAG Snap-on or Anton Bauer battery

Model 9992• For 12V Mini PaglightModel 9995

Lighting

Paglight Kits Incorporating Pagbelt NMH

Paglight Kit 12V 10Ah• Standard 12V Paglight• XLR4 Power Base (length 1.5m)• Standard halogen lamp holder• A choice of 2 halogen lamps• Rotatable Accessory Kit comprising:

1 dichroic filter, 1 diffuser and 2 parallelbarn doors

• 12V 10Ah Pagbelt NMH with integralovernight charger and a power lead suitablefor country of use

• Handle 1/4” Whit. bush/stud• Camera shoe plate and stud adaptorModel 9875N

Paglight Kit 13.2V 10Ah• Standard 12V Paglight• XLR4 Power Base (length 1.5m)• Standard halogen lamp holder• A choice of 2 halogen lamps• Rotatable Accessory Kit comprising:


• 13.2V 10Ah Pagbelt NMH with integralovernight charger and a power lead suitablefor country of use

• Handle 1/4” Whit. bush/stud• Camera shoe plate and stud adaptorModel 9878N

Paglight Kits PowerArc & LED Field Kits

Paglight PowerArc Field Kit• Standard 12V Paglight• Choice of Power Base (PP90, D-Tap 150mm

or 500mm, or XLR4)• 2 standard halogen lamp holders• A choice of 2 halogen lamps• PowerArc Unit, arc lamp and protector• Rotatable Accessory Kit comprising:


• Tapered barn doors (pair)• PowerArc to halogen conversion filter• Handle 1/4” Whit. bush / stud• Camera Clamp 1/4” Whit. bush• Camera shoe plate and stud adaptor• Fitted Flight Case• 468 x 386 x 109mm / 3kgModel 9825

Paglight LED Field Kit• Standard 12V Paglight• Choice of Power Base (PP90, D-Tap 150mm

or 500mm, or XLR4)• 2 standard halogen lamp holders• A choice of 2 halogen lamps• LED Dimmer Unit and protector• Rotatable Accessory Kit comprising:


• Tapered barn doors (pair)• LED to halogen conversion filter• Handle 1/4” Whit. bush / stud• Camera Clamp 1/4” Whit. bush• Camera shoe plate and stud adaptor• Fitted Flight Case• 468 x 386 x 109mm / 3kgModel 9825L

Complete On-Camera Lighting KitPaglight Kits are designed to provide everythingrequired for a professional lighting source thatcan be used either on or off camera.

Halogen Light SourceThe Paglight is supplied with a standardhalogen lamp holder and a choice of two bi-pinhalogen lamps (20W, 35W, 50W, 75W or100W). The light is fitted with the halogenrotatable accessory kit. A handle is included foroff-camera use. A stud adaptor and a camerashoe plate are included for mounting the lightto the camera.

Ni-MH Battery BeltThe XLR4 Power Base enables the Paglight tobe powered from the Pagbelt NMH battery beltsupplied. The 10Ah Ni-MH power source,available in 12V or 13.2V formats, ideal forpowering lights of up to 100W. The Pagbeltincorporates an integral overnight charger.

Flight CaseThe kit is supplied in a compact, impactresistant flight case for convenience andprotection.

HMI or LED Lighting KitThere are two Paglight Field Kits, one thatincorporates the PAG PowerArc HMI unit, andone that incorporates the PAG LED DimmerUnit. Each kit includes two standard halogenunits, enabling you to take full advantage of theunique plug-in lamp holder system that makesPaglight the industry’s most versatile cameralight. Converting the Paglight from halogen toArc or LED takes a matter of seconds.

Tailored to Your NeedsThe kit is tailored to your requirements with achoice of Power Base, suitable for the lightouput on most cameras (PP90, D-Tap or XLR4),and a choice of two halogen lamps (20W, 35W,50W, 75W or 100W).

The light is fitted with a halogen rotatableaccessory kit. A dichroic filter that converts thelight output to match halogen is included foruse with the PowerArc and the LED unit.

A stud adaptor and a camera shoe plate areincluded for mounting the light to the camera. Ahandle is included dor handheld use. A CameraClamp is included for mounting the Paglight to acamera handle.

24

Ligh

ting

Mini Paglight (12V) Top-light for handheld camcorders

Mini Paglight PP90• Standard halogen lamp holder• Hot-shoe Power Base with a

PP90 connector (lead length1.5m) for use with the lightoutput on a PAGlok Connector

• Stud Adaptor & Shoe PlateModel 9001L

Mini Paglight D-Tap/500mm• Standard halogen lamp holder• Hot-shoe Power Base with a

D-Tap connector (lead length500mm) for use with a D-Taplight output


Mini Paglight XLR4• Standard halogen lamp holder• Hot-shoe Power Base with an

XLR4 connector (lead length1.5m) for use with the lightoutput on a Pagbelt NMH


Accessory Kit• Halogen to daylight conversion

filter• Diffuser• Parallel barn doors• 360° Rotatable accessory ringModel 9007

• Broadcast quality 12V miniaturecamera light

• Soft, clean output, no hotspots

• Plug-in Softstart lamp holder for usewith Li-Ion batteries

• Plug-in PowerArc HMI for high-powerdaylight output

• Fully-focusable from spot to flood

• Cool-running patented design

• Detachable hot-shoe Power Basewith choice of connector

• Power from 12V to 14.8V batterypacks or belts


25

9016 Standard Lamp Holder

9017 Softstart Lamp Holder

9018 12V 10W

9019 12V 20W

9020 12V 35W

12V Lamps

9021 LampProtector

9008 AccessoryHolder (ring only)

9010 Diffuser

9011 Barn Doors (pair)

9013 XLR-4 Power Base (1.5m)

9012 PP90 Power Base (500mm), 9986 (1.5m)



9007 Rotatable Accessory Kit

9009 Dichroic Filter9023 PowerArc

Conversion Filter

9022 PowerArc9025 PowerArc

Lamp

Lighting

14

Paglight C6 Low-cost lighting kit for handheld camcorders

• Miniature 6V broadcast quality halogencamera light

• Soft, even output, no hotspots

• Plug-in lamp holder makes lampchanging quick and easy

• Daylight filter, diffuser and barndoors included

• Supplied with 20W halogen lamp(10W and 30W also available)

• Cool-running patented design

• 6V 8Ah Ni-MH battery powersthe light for 2 hrs 45 mins

• Battery fully charged in 3 to4 hrs from fully-discharged

• 6V charger with AC adaptorfor country of use

Paglight C6 Kit• 6V Paglight C6 camera light• Plug-in lamp holder and 20W lamp• 360° Rotatable accessory ring, daylight filter,

diffuser and barn doors• PAG C6 PowerPack (6V 8Ah Ni-MH)

including a detachable shoulder strap• PAG Power Charger with detachable plug

of choice (UK, Euro, US/Japan, Australia)• Camera Shoe PlateModel 1001

C6 PowerPack• 6V 8Ah rechargeable Ni-MH C6 PowerPack• Provides 2 hrs 45 mins continuous

run-time with 20W lamp• Can be charged in 3 to 4 hours using

PAG C6 Power Charger• Includes shoulder strapModel 1008H

Belt Clip• Alternative to the shoulder strap provided

with the C6 PowerPack• Mounts to the rear of the battery and

enables it to be worn on a trouser beltModel 1022

C6 Power Charger• Charges C6 PowerPacks in 3 to 4 hours• Requires AC input connection plug (UK,

Euro, US/Japan or Australia)Model 1002

• UK AC plug for C6 Power ChargerModel 1004• Euro AC plug for C6 Power ChargerModel 1003• US/Japan AC plug for C6 Power ChargerModel 1005• Australia AC plug for C6 Power ChargerModel 1006

1009 Lamp Holder& Lamp Protector

1010 10W

1011 20W

1012 30W

6V Lamps

9972 CameraShoe Plate

1014Diffuser

1013Dichroic

Filter

1016Accessory

Ring

1019BarnDoor

Short Extender Arm• Mounts to the camera’s

accessory shoe andallows the Paglight C6plus one otheraccessory to bemounted

Model 1020

Accessory Bracket• Mounts to the 1/4" Whit. bush

on the base of the cameraand allows Paglight C6 plusone other accessory tobe mounted

Model 1021See Mounting Options

(all Paglights) on Page 28

26

Ligh

ting

Paglight 250W Handheld location lighting

Paglight 250W 24V• Halogen lamp holder for use with 24V 250W

lamp Model 9913• Hot-shoe Power Base with XLR4 connector

(lead length 1.5m) for use with XLR4 outputon Pagbelt NMH battery belts

• 60mm dia. reflector• Stud Adaptor & Shoe PlateModel 9031

Paglight 250W 30V• Halogen lamp holder for use with 30V 250W

lamp Model 9914• Hot-shoe Power Base with XLR4 connector

(lead length 1.5m) for use with XLR4 outputon Pagbelt NMH battery belts

• 60mm dia. reflector• Stud Adaptor & Shoe PlateModel 9032

Rotatable Accessory Kit• Halogen to daylight conversion filter• Diffuser• 2 x parallel barn doors• 360° Rotatable accessory ringModel 9033

Paglight 250W Kits Incorporating Pagbelt NMH

• Hot-shoe power base with XLR4 connector (lead length 1.5m)• Plug-in 24V halogen lamp holder• Accessory ring, diffuser, halogen to daylight filter, parallel barn doors• 2 x 250W lamps• Handle• 24V 10Ah Pagbelt NMH incorporating integral overnight charger• AC power lead for country of use• Fitted flight caseModel 9042N

• Plug-in 30V halogen lamp holder• 30V 10Ah Pagbelt NMH incorporating integral overnight charger• AC power lead for country of useModel 9044N

• Compact and portable 250W ‘basher’

• Use handheld or stand-mounted on location

• 24V and 30V models available

• Soft, clean output, no hotspots

• Fully-focusable from spot to flood

• Plug-in lamp holder makes lamp changingquick, easy and safe

• Designed to maximise heat dissipation

• Detachable Power Base

• Fully positionable, multi-directional mounting

• Power from 24V or 30V Ni-MH battery belts


• Multiple mounting options available

27

Lighting

Stud Adaptormale to male1/4” Whit.Model 9971

CameraShoe Plate1/4” Whit.Model 9972

Camera Clamp• Enables you to clamp the Paglight

to the handle of the camera• Mounts to the Paglight via its 1/4”

Whit. bush and stud adaptorModel 9971 (not included)

Model 9807

Paglight Handle• For handheld use• Incorporates a 1/4” Whit.

stud and a 1/4” Whit. bush• Length 127mmModel 9906

Spigot Adaptor1/2” dia. to1/4” Whit.Model 9985

Multi-Configuration SpigotAdaptor: 5/8", 1/2" and 1/4”dia. in-line or 90° conversionModel 9977

Spigot Pin5/8” dia. to1/4” Whit.Model 9976

Thread Adaptor3/8” dia. to1/4” Whit.Model 9974

Paglight Extender Arm• Enables you to position the camera

light to the side of the subject oraway from the microphone to avoidcasting a shadow

• Includes fittings for mounting to acamera shoe or a camera bush

Model 9990

Mounting Adaptor Kit• Comprises 9971, 9974,

9975, 9976 & 9977Model 9978

Paglight 250W Accessories

28

Mounting Options (All Paglights)These useful accessories enable any Paglight to be mounted to any camera, tripod, lighting rig or gaff grip

Spigot Pin1/2” dia. to1/4” Whit.Model 9975

9039 24V Lamp Holderand Protector

9913 24V 250W lamp

9960 XLR-4 Power Base (1.5m)

9038Tapered Barn Doors (pair)

9036 Diffuser 9035 Dichroic Filter

9037Parallel Barn Doors (pair)

9033 Rotatable Accessory Kit:Ring, Diffuser, Dichroic and

Parallel Barn Doors

9034Accessory Holder

9040 30V Lamp Holderand Protector

9914 30V 250W lamp

See Mounting Options (all Paglights) below

Ligh

ting

PAG Orbitor Advanced Camera Support

PAG Orbitor• A two-handed assembly, that provides 3-axis

control, and added support for extendedshooting

• The camera mounting plate is compatiblewith the Manfrotto tripod

• 1/4” Whit. camera mounting• Maximum weight supported 4.5kg• Belt fits waists up to 46"• Total weight 3.9kgModel 2002

PAG X1A• Economical, single-handed support, with pan

and tilt facility, for use with smaller, lightercameras

• The camera mounting plate is compatiblewith the Manfrotto tripod

• 1/4” Whit. camera mounting• Total weight 3.1kgModel 2001

PAG X1A Conversion Kit• Converts the PAG X1A into a PAG Orbitor

advanced camera supportModel 2003

Camera Power AccessoriesIn place of the counterbalance weight on theOrbitor back plate a variety of camera poweroptions can be mounted, including:• V-Mount Connector Model 9522/78V• PAGlok Connector Model 9522/78• C6 PowerPack Model 1008HThe camera may require a DC Adaptor, See7.2V Power Solutions on Page 30.

Professional AccessoriesWireless receivers, remote controls andviewing monitors can be easily clamped tothe Orbitor’s rigid but lightweight structure.

• A balanced and stable shooting platformfor handheld camcorders and DSLRs

• Reduces fatigue on long shoots

• The camera feels weightless and controlis effortless

• It enables a wide range of professionalshooting techniques

• Pan tilt and roll with 3 axis control

• Shoot at right-angles to your body

• Quick-release camera plate compatible withManfrotto tripod

• Telescopic suspension rod supports the camerafrom beneath and helps absorb camera shake

• Fully adjustable

• Quick and simple set-up

• Tough, lightweight construction

PAGlok Connector forOrbitor Back PlateModel 9522/78

PAG V-MountConnector for OrbitorBack PlateModel 9522/78V

29

Camera Supports

Down-Converter Leads for use with broadcast batteries

Model Camcorder Connector

9680/01 Canon XF305, EOS 7D PP90

9680/02 Sony DSR 200 PP90

9680/03 Sony PD150, PD170, A1E PP90

9680/04 Panasonic DVX100, HVX200 PP90

9680/05 Sony Z1, Z5, Z7 PP90

9680/06 Canon EOS 5D MKII PP90

Battery Mounts for use with 9680/-

9522/60 PAGlok Belt Clip

9522/60V PAG V-Mount Belt Clip

9522/78 PAGlok Connector for Orbitor Back Plate

9522/78V PAG V-Mount Connector for Orbitor Back Plate

Down-Converter Mounts for use with broadcast batteries

9522/75 PAGlok Connector for JVC HD100

9522/77 PAGlok Connector Canon XL-H1

Down-Converter Leads for use with 12V to 14.4V Pagbelt NMH


9655/01 Canon XF305, EOS 7D XLR4

9655/02 Sony DSR 200 XLR4

9655/03 Sony PD150, PD170, A1E XLR4

9655/04 Panasonic DVX100, HVX200 XLR4

9655/05 Sony Z1, Z5, Z7 XLR4

9655/06 Canon EOS 5D MKII XLR4

Up-Converter Leads for use with 6V C6 PowerPack


1023/01 Canon XF305, EOS 7D C6

1023/02 Sony DSR 200 C6

1023/03 Sony PD150, PD170, A1E C6

1023/04 Panasonic DVX100, HVX200 C6

1023/05 Sony Z1, Z5, Z7 C6

1023/06 Canon EOS 5D MKII C6

Power Solutions for 7.2V to 8.4V Camcorders & DSLRs

Broadcast Power for HandheldCamcorders and DSLR CamerasPAG has developed a series of productsthat enable you to power 7.2V to 8.4Vcameras using a range of PAG batteriesincluding higher voltage PAG L95ebroadcast packs and Pagbelt NMHbelts.

There are three types of PAG DCAdaptor available. They allow you topower the camera using either:• 12V to 14.8V V-Mount or PAGlok

batteries• 12V to 14.4V PAG battery belts• The 6V battery supplied as part

of the Paglight C6 kit

PAG Down-Converter Leads foruse with V-Mount or PAGlokBatteriesThe DC Adaptor plugs into the batteryport of the camcorder, and into thePP90 power port of a PAGlok or PAGV-Mount Connector (see Page 31).These professional battery mounts canbe worn on a trouser waistband or belt,or fitted to the back plate of a PAGOrbitor camera stabiliser.

PAG Down-Converter Mounts foruse with PAGlok or V-MountBatteriesPAG offers a battery mount thatincorporates a built-in DC Adaptor forcertain camcorders. These mounts canbe fitted to the rear of the camcorder.They feature a PP90 output socket thatcan be used to power a 12V MiniPaglight or other 12V accessories.

PAG Down-Converter Leads foruse with Pagbelt NMHThese DC Adaptor leads connect to thecamcorder in the same way as the PP90model, but incorporate an XLR4connector that enables you to power thecamera from a 12V, 13.2V or 14.4VPagbelt NMH battery belt, worn aroundyour waist.

PAG Up-Converter Leads for usewith the C6 BatteryThese DC Adaptor leads are aimed atcamcorder users who don’t already own12V batteries and chargers, and whoare looking for an economic, all-in-onecamera power and lighting solution.The Paglight C6 Kit contains aprofessional quality on-board 6Vhalogen light, a 6V 8Ah Ni-MH battery,and a designated charger (see Page26). The appropriate DC Adaptor willboost the 6V output of the C6 battery topower the 7.2V to 8.4V camera,providing extended run-time. The samebattery can be used to simultaneouslypower the 6V Paglight C6. The DCAdaptor attaches to the camcorder viathe battery port. If you purchase anadditional C6 PowerPack with yourPaglight C6 Kit, you will be able to runyour camcorder and camera light fortwice as long, without stopping tocharge a battery.

30

7.2V

Pow

er S

olut

ions

ADAPTORS PAG Battery Mounts and Mount Adaptors

PAG V-Mount Connector• Provides a secure mechanical and electrical

connection between the battery and thecamera/equipment

• Camera specific• PP90 or D-Tap output socketModel 9522/-V

V-Mount to PAGlok Adaptor• Adapts the Sony V-Mount for use with all

PAGlok batteriesModel 9522/64

PAGlok to V-Mount Adaptor• Adapts the PAGlok Connector for use with

V-Mount batteriesModel 9512

Snap-on to PAGlok Adaptor• Adapts the Anton-Bauer Snap-on camera

mount for use with PAGlok batteriesModel 9518

PAGlok Belt Clip• Clips onto your trouser belt• 2 x PP90 output sockets for powering a

camera light and a 7.2V camcorder via adown-converter lead

Model 9522/60

V-Mount Belt Clip• Clips onto your trouser belt• 2 x PP90 output sockets for powering a

camera light and a 7.2V camcorder via adown-converter lead

Model 9522/60V

Belt-Mounted PAGlok Connectors• Use any PAGlok battery to power camera

accessories independent of camera battery• Replacement battery conveniently placed• Two full-size PAGlok Connectors• Adjustable, lightweight belt with quick

release buckle• Single XLR4 outputModel 9523

Belt-Mounted V-Mount Connectors• Use any V-Mount battery to power camera

accessories independent of camera battery• Replacement battery conveniently placed• Two full-size PAG V-Mount Connectors• Adjustable, lightweight belt with quick

release buckle• Single XLR4 outputModel 9523V

Battery Mount AdaptorsAdaptors that provide compatibility between theAnton-Bauer and PAG systems have alwaysbeen available from PAG.

PAG now provides adaptors that allowcompatibility between Sony and PAG products,including PAG Snap-on compatible batteries.

PAGlok Connector• Provides a secure mechanical and electrical

connection between the battery and thecamera/equipment

• Camera specific• PP90 output socketModel 9522/-

PAG Battery Mount Adaptors

Battery MountsThe PAGlok Connector was one of the broadcastindustry’s earliest battery mounting systems.A PAGlok Connector can be provided for virtuallyany broadcast equipment power application.Now that Sony’s V-Mount system has beenwidely adopted, PAG provides its own versionof the V-Mount battery connector for use witha wide range of cameras and equipment.

Belt-Mounted Battery MountsBelt-mounted battery mounts are a convenientway of carrying two batteries (PAGlok or V-Mount) to provide off-camera power for arange of applications. Output is via an XLR-4socket. The batteries’ voltages and capacitiesare not connected in any way and power is notcontinuous.

31

Battery Mounts &

Adaptors

PAG Battery Mount Adaptors

PAGlok to Snap-on Adaptor• Adapts the PAGlok connector for use with

Snap-on batteriesModel 9517

Snap-on to V-Mount Adaptor• Adapts the Anton-Bauer Snap-on camera

mount for use with V-Mount batteriesModel 9510

V-Mount to Snap-on Adaptor• Adapts the Sony V-Mount connector for use

with Snap-on batteriesModel 9511

Power Plate PAGlok to PAGlok• Accepts 2 PAGlok Batteries

(L110, L95, L95e or ZL-50)• For camera with PAGlok Connector• 215 x 132 x 39mm / 0.39kgModel 9551

Power Plate PAGlok to Snap-on• Accepts 2 PAGlok Batteries

(L110, L95, L95e or ZL-50)• For camera with Anton Bauer battery

mount• 215 x 132 x 40mm / 0.40kgModel 9552

Power Plate PAGlok to V-Mount• Accepts 2 PAGlok Batteries

(L110, L95, L95e or ZL-50)• For camera with Sony V-Mount• PP90 DC output for camera light• 215 x 132 x 55mm / 0.42kgModel 9553

Power Plate V-Mount to PAGlok• Accepts 2 V-Mount Batteries

(L110, L95, L95e or ZL-50)• For camera with PAGlok Connector• 215 x 136 x 44mm / 0.39kgModel 9551V

Power Plate V-Mount to Snap-on• Accepts 2 V-Mount Batteries

(L110, L95, L95e or ZL-50)• For camera with Anton Bauer battery

mount• 215 x 136 x 45mm / 0.41kgModel 9552V

Power Plate V-Mount to V-Mount• Accepts 2 V-Mount Batteries

(L110, L95, L95e or ZL-50)• For camera with Sony V-Mount• PP90 DC output for camera light• 215 x 136 x 60mm / 0.43kgModel 9553V

PAG Dual Battery Mounts for All Systems

• Combine the capacities of two L95e batteries

• Create a 190Wh power source that can handlea high current draw of up to 10A

• Use Power Plate to convert your batterymounting system, if required

• Travel by air with 190Wh of power and complywith air transport regulations

• Ensure that your high-definition set-up doesnot over-discharge the power source

• The Power Plate and two L95e batteries weighonly 1.87kg, and are an ideal counterbalancefor the lens

• Maintain in-the-viewfinder capacity data

• PP90 camera light output (9553 and 9553V)

32

Batte

ry M

ount

Ada

ptor

s

PAG Continuous Power Units

PAGlok Power Module• Supplies continuous power

from two PAGlok batteries forediting equipment, remotecameras or microwave links

• 12V to 14.8V output via XLR4socket

• A third power source, such as aPagbelt, can be connected viathe XLR4 input

• Two Power Modules can belinked to provide seamlesspower from up to five powersources using connecting leadModel 9664

• Includes carrying strap• 135 x 115 x 55mm / 0.4kgModel 9661

• Version, for use with PAGV-Mount batteries

Model 9661V

PAGlok Power Module• Supplies continuous power

from two PAGlok batteries forediting equipment, remotecameras or microwave links

• 12V to 14.8V output via XLR4socket

• 7.2V output via connector ofyour choice

• A third power source, such as aPagbelt, can be connected viathe XLR4 input

• Two Power Modules can belinked to provide seamlesspower from up to five powersources using connecting leadModel 9664

• Includes carrying strap• 135 x 115 x 55mm / 0.4kgModel 9663


Model 9663V

Series/Parallel Module• Connects two PAGlok batteries

in series to produce an outputvoltage equal to the sum of thetwo batteries’ individual voltages(up to 30V), for applicationssuch as powering lighting ormicrowave links

• Connects two PAGlok batteriesin parallel to produce a capacityequal to the sum of the twobatteries’ individual capacities(up to 14Ah) for extendedequipment run-time and cont-inuous operation

• Output via XLR4 socketModel 9581


Model 9581V

Series/Parallel Belt• Connects two PAGlok batteries

in series to produce an outputvoltage equal to the sum of thetwo batteries’ individual voltages(up to 30V), for applicationssuch as powering lighting ormicrowave links

• Connects two V-Mount batteriesin parallel to produce a capacityequal to the sum of the twobatteries’ individual capacities(up to 14Ah) for extendedequipment run-time andcontinuous operation

• Output via XLR4 socket• Quick-release buckleModel 9527


Model 9527V

PAG Radio Mic Receiver Brackets

Left Side-Facing Kit• For use with cameras fitted with

the PAGlok connector (notincluded)

• Enables the mounting of a radiomicrophone receiver

Model 9620

Right Side-Facing Kit• For use with cameras fitted with



Model 9621

Dual Kit• For use with cameras fitted with


• Enables the mounting of tworadio microphone receivers

Model 9622

9522/58 & 64 Kit• For use with PAGlok to V-Mount

Adaptors Models 9522/58 &9522/64.


Model 9623

33

Continuous Power Units

34

UN TestingThe International Air Transport Association (IATA) in association withthe International Civil Aviation Organisation (ICAO) and the UnitedNations (UN) set clearly defined rules regarding the air transportationof Li-Ion batteries.

From January 1st 2009, the 50th Edition of the IATA Dangerous Goodsregulations requires the independent testing of each type of Li-Ionbattery, not just the individual cells, to ensure that the design andconstruction are compliant with the stringent regulations. This is acostly process for the manufacturer, but it should assure you, thecustomer, that the battery design is safe and of the highest possibleprofessional standard.

PAG Li-Ion batteries have been tested and certified to comply withUnited Nations Specification ST/SG/AC.10/11/Rev 4. Copies of thetest reports can be obtained from PAG Ltd.

Air TransportationThe IATA regulations also affect individuals carrying Li-Ion batterieson-board civil aircraft, and influence the way they are classified,labeled and packed when transported as air cargo or by road freight.Restrictions are imposed on batteries that have capacities greater than100Wh.

PAG Ltd. hereby declares that PAG PL96, L95 and L95e Lithium-Ionbatteries have a watt-hour rating of less than 100 watt-hours. Thisrating is in compliance with Section 2.3.5.9 of the 50th Edition ofthe IATA Dangerous Goods Regulations (2009).

The following information will assist you when travelling with orshipping Li-Ion batteries:

Transport by Commercial Airline / Personal Luggage

• Check-in of Li-Ion batteries is not allowed unless the battery isattached to the camera or the equipment it powers

• An individual may take on-board, in hand luggage, an unlimitednumber of Li-Ion batteries that have capacities of 100Wh or less.

• Li-Ion batteries that have capacities greater than 100Wh, but lessthan 160Wh, are restricted to 2 items per person, in hand luggage.

• Li-Ion batteries that have capacities greater than 160Wh cannotbe taken as hand luggage or checked-in under any circumstances.

PAG recommends that customers also confirm with their carrier ofchoice, to determine any local rules and policies, before travelling.

Your PAG Li-Ion batteries are fully protected against short-circuit andover-current. However, it is recommended that you make sure they areobviously safe and inspire confidence in the airport check-in staff:

• Put tape over the contacts.

• Place each battery in a plastic bag.

• Pack batteries in your hand-luggage in a safe and secure manner.

We advise that you carry a copy of the PAG Air TransportationCertificate supplied with each PAG PL96, L95 or L95e battery, ordownload a copy from the PAG website:

http://www.paguk.com

For more information regarding Travelling Safety with Batteries andBattery-Powered Devices, please see the following website:

http://safetravel.dot.gov/whats_new_batteries.html

Transport by Air Freight and Road Freight

• Li-Ion batteries that have capacities of 100Wh or less can beshipped by air or road, without restriction, as long as they complywith Packing Instruction 965.

• Li-Ion batteries over 100Wh, when shipped by road or air, areclassified as dangerous goods and subject to special packagingcertification and approval from external specialists.

The correct forms and packaging labels for shipping PAG Li-Ionbatteries can be obtained from PAG Ltd. or downloaded from thePAG website.

Air Transportation of Li-Ion BatteriesAi

r Tr

ansp

orta

tion

PAG Warranty, Service & Support

35

The PAG WarrantyThe PAG Warranty guarantees each product for a period of 18 months,unless otherwise stated.

PAG L95 and L110 Time Batteries, PAG Chargers and 12V Paglightscarry a 2 year warranty.

Refer to the product Instruction Manual for full warranty terms andconditions.

ManufacturingExcellenceISO 9001:2008 is a standard that relates to quality managementsystems and is designed to help ensure that companies meet theneeds of their customers. PAG is proud to have been certified toISO 9001:2008 standard in recognition of the seriousness with whichthe company takes matters of quality control.

Service & SupportPAG provides full technical support throughout a product’s lifetime,which includes servicing, repairs and technical advice. The quality ofthis service is second-to-none because PAG is the concept originator,design authority and manufacturer of its products.

PAG maintains a worldwide network of Authorised Service Centres.These facilities have a wealth of specialist knowledge, which is theresult of PAG’s 40 years of experience. Using PAG’s Authorised ServiceCentres is the only way to ensure the continuation of the qualitystandard for which you first chose PAG products.

For servicing outside of the UK contact your nearest PAG Agent via thePAG website at www.paguk.com

For servicing in the UK contact the PAG Service Department at theLondon headquarters, or email [email protected]

RecellingPAG batteries should only be recelled by PAG. A cell replacement bya company other than PAG degrades the build standard of the productand leaves you with a battery of dubious quality, and a potential safetyconcern. As an alternative to recelling your battery, PAG offers UKcustomers a 25% discount on the price of a new battery of equivalentor greater specification, including a full warranty.

RecyclingPAG provides a recycling service for all of its expired batteries. Simplyreturn your batteries by prior arrangement to your PAG Agent, or toPAG Ltd. London. This ensures that the materials involved in theirmanufacture are recovered for future use, where possible, or disposedof in accordance with the appropriate legislation.

TrademarksThe following are trademarks of PAG Ltd:‘PAG Professional Broadcast Equipment’ ‘PAGlink’ ‘Time Battery’‘Power & Time Display’ ‘Pagbelt’ ‘PAG ACS’ ‘PAG AR Series 2’ ‘PAGPulsar’ ‘PAG Quasar’ ‘PAG Cube’ ‘PAG iPC’ ‘PAG Freelancer’ ‘PAG PowerPlate’ ‘PAGlok Connector’ ‘Paglight’ ‘Softstart’ ‘PowerArc’ ‘PowerMax’

All third party trademarks are acknowledged as such.

PAG Ltd. retains the right to change the specifications contained hereinwithout notice.

Warranty and Service

PAG Ltd.565 Kingston RoadRaynes ParkLondon SW20 8SAUnited Kingdom

E [email protected] +44 (0)20 8543 3131F +44 (0)20 8540 4116www.paguk.comwww.pagstore.com

PAG is a UK distributor for Angenieux,Cartoni, Tiffen, Transvideo & 16x9 Inc.

© 2011 PAG Ltd.

Documents

PAG Camera Support Product Catalogue