PMAC Catalogue 2012

Zhuhai Pilot Technology Co. Ltd.

Power Meters Catalog V4.0Power metering & energy efficiency management

Established in 2000, Zhuhai Pilot Technology Co., Ltd. occupies an area of 20,000 square meters plant with nearly 400 staffs.

PILOT headquarter in Zhuhai of China, and equipped with a R&D center in Shenzhen NanshanTechnology Park.

Our business is throughout the world with over 20 branch offices in China, and distribution network in Germany, Romania, Iran, Saudi Arabia, UAE, Pakistan, India, Indonesia, Malaysia, New Zealand, Australia, Canada, Mexico, Colombia, Chile, Brazil etc.

Our products and services:

--Digital panel meters--Multifunction power meters--Energy meters--Power Quality Analyzer--Branch circuit monitor--LV motor protection and control devices--Leakage current detectors--Energy efficiency solution

Additional, our R&D team design customized products to satisfy your special requirements.

Certificate 1

Projects References 2

Product Selection Guide 4

Products

PST700Multifunction Power Meter 5

PMAC615 Single Phase Digital Panel Meter 8PMAC625 Three Phase Digital Panel Meter 9

PMAC720 Multifunction Power Meter 11PMAC727 Multifunction Power Meter 14PMAC735 Multifunction Power Meter 17PMAC760 Multifunction Power Quality Analyzer 20

PMAC901 Single Phase Din-rail Energy Meter 23PMAC903 Three Phase Din-rail Energy Meter 23PMAC905 Multifunction Energy Meter 25PMAC915 Three Phase Multi-tariff kWh Meter 27PMAC921 Single Phase Multi-tariff kWh Meter 29

CONTENTS

Page

Certificate

1

Projects References

Projects Abroad

Hindustan Zinc Limited, the Lead Plant and Silver Plant ( India)IKEA Mega Bangna - IKEA Asias Largest Complex (Thailand)Trekkpje Uranium Plant (South Africa) D.G Khan Cement Plant (Pakistan)Bandung Hydropower Plant (Indonesia)Scotts Feeds Factory Project ( U.K.)Iranian Petrochemical Project ( Iran)

Olympic Venues

Beijing Olympic Hockey CenterBeijing Olympic Beach Volleyball CenterBeijing Olympic Shooting RangeQingdao International Sailing CenterBeijing Olympic Basketball Gymnasium

Municipal Projects

Shanghai F1 International Circuit Shanghai Pudong Government Processing Center Shanghai World Expo - World Expo Axis Shanghai World Expo Village, Block B/ Block D/E plot Shanghai World Expo-China Pavilion Bank of China Shanghai Information Center Chengdu Commodity Inspection Bureau Guangzhou Baiyun International Convention and Exhibition Centre, Phase I, II, III Guangzhou International Financial Center (also known as Guangzhou West Tower) Handan Wastewater Treatment Plant Hangzhou Nanxing Water Plant Industrial and Commercial Bank of China Head Office Building, Xinjiang Nanjing Jiuhuashan TunnelNew Museum of Nanjing Massacre Memorial Hall Sichuan Cangxi Wastewater Treatment Plant Sichuan Wenjiang Water Plant Urumqi Inspection Centre Xingjiang Radio and Television Building Xinjiang Television Station Building

Power Plants / Hydropower Plants

Yunfu Power Plant of Guangdong ElectricXuangxin Power Plant in Inner MongoliaXinjiang Manasi Power Plant, Phase IIIDaihai Power Generation Co. Ltd. 4 600MW project, in Inner Mongolia"Shandong Binzhou Weiqiao Thermoelectric Co., Ltd. Zouping 3rd Thermoelectric Plant: 8 135KW Project"Inner Mongolia Yuanbaoshan Power Plant:2 600MW project Inner Mongolia JingLong (Fengzhen) Power Plant: 2 600MW projectXinjiang Hami Power PlantXinjiang Qiapuqihai Hydropower StationXinjiang Turk Yamaguchi Hydropower Station Xinjiang Karasuk Hydropower StationJilintai Hydropower Station IIExpansion Project of Qinshan Nuclear Power Station Phase II

Airports / Metro

Guangzhou New Baiyun International AirportShanghai Pudong International Airport, Phase IIShanghai Hongqiao Airport Reconstruction ProjectQingdao Luiting International AirportWuxi AirportUrumqi Airport Overnight FloorXinjiang Kanas Airport TerminalBeijing Metro Line 4#, 5#Shanghai Metro Line 6#, 7#Dalian Light Rail Line 3#Shenzhen Metro Line 1#Guangzhou Metro Line 2#/ 3#, 4#

2

Telecommunication Porjects

Shenzhen King Tin Telecommunications RoomShenzhen Fu Yong Telecommunications Room, Phase I,II,& IIIChina Netcom Building in ShanghaiChina Mobile Building in HenanChina Mobile Building in WangjingChina Unicom Building in Zhuhai

Tobacco Industry

Hongyun Group, Kunming Cigarette Factory Moving ProjectLongyan Cigarette FactoryGuiyang Cigarette FactoryHongta Group, Yuxi Cigarette FactoryHongyun Group, Honghe Cigarette FactoryShijiazhuang Cigarette Factory

Hospital / Gym/ School

Tsinhua University Environmental BuildingPalais Omnisports of Guangzhou Asian Games CityDongguan Changping Chang An HospitalShanghai Nanhui Central Hospital Shanghai Red House HospitalShanghai Donghua University, Songjiang CampusGuangzhou University City Complex Building, Phase I, II & IIIThe New Campus of Sichuan Normal UniversityShanghai StadiumFoshan Century Lotus StadiumFoshan Swimming PoolFoshan Pearl StadiumBeijing Chaoyang Hospital

Commercial/ Complex Buildings

TPL National Support Center / ShanghaiGuangzhou Science MeseumGuangdong GSM BuildingShenzhen Ho Shing Commercial CentreShenzhen Hong Long Century PlazaGuangxi TV Station/ Guangxi Science MuseumChongqing Grand TheatreBeijing Yanjing HotelBeijing Big Bell Temple Commercial Plaza Beijing Chang An Grand MallShanghai Gubei Fortune CentreShanghai Tongji Union Square Shangri-La Hotel, QingdaoHanzhong IMC Times Square in Shaanxi

Oil/ Chemical/ Light Industry

China Heavy Truck ZF Steering Project Daqing Petrochemical 1.2 million / N delayed coking Daya Bay CNOOC Phase II and petrochemical supporting project Henan Zhongzhou Aluminum Inner Mongolia Yitai Coal Chemical Project New paper mill project in Myanmar Rene Sola project in Sichuan, 3,000 tons of polysiliconShanghai Chlor-Alkali Chemical PVC project Shanghai Huayi Group, 6500 tons / year synthetic camphor agent project Shanghai No. 5 Iron and Steel Plant Shanxi Coking Group, 1 million tons of coking Shihezi Tianye Chemical, 500,000 tons of calcium carbide project Sinopec (GZ) 1 million t catalytic cracker Sinopec East Gas Transmission - Puguang gas field project Sinopec Fujian Petrochemical integration project Sinopec Refining & Chemical Project in Shijiazhuang Xinjiang Tianshan Cement, 2000 tons / D Xinjiang Yili Steel, 300,000 tons of calcium carbide project in Nilka

Projects References

3

Photo

SOE event log

Setpoint alarm

Data record

RS485 / Modbus

The 2nd RS485

Profibus

Ethernet or USB

Infrared COM

Memory card

Pulse output

Other functions

Communication

U or F deviation

Phase angle

PST700 PMAC615 PMAC625 PMAC720 PMAC735 PMAC727 PMAC760 PMAC901 PMAC903 PMAC905 PMAC915 PMAC921

Display LCD LED LED LCD LCD LCD LCD LCD LCD LCD LCD LCD

Single or 3 phase 3 single 3 3 3 3 3 single 3 3 3 single

Real-time measurement

U, I, P, Q, kWh

S

PF, F

kvarh

kVAh

Demand

Max./ min. value

Multi-tariff energy

Temperature

Power quality analysis

Harmonic

Voltage crest factor

Current K factor

Unbalance rate

Load rate

DI/ DO

Status input Relay output

Analog input

Analog output

Product Selection Guide

ModelFeatures

standard feature optional feature 4

Feature Suit for LV/ HV voltage system

For low voltage system, PST700 direct connect up to 600VAC

For high voltage system, PTS700 need to connect with PTs, PT ratio programmable

New appearance and designLarge LCD display and button, replace AI capacitor by Tam capacitor

Self-testing phase sequence error In case of error phase sequence input, PST700 will display on LCD

Real-time measurementTrue-RMS measuring parameters includes:

U, I, P, Q, S, PF, F, kWh, kvarh, kVAh, demand, max./min. value

Demand calculation mode is programmable2 kinds of demand modes: fixed mode and slip mode

Demand cycle programmable: 5/ 10/ 15/ 30/ 60mins

Slip window programmable: 1/ 2/ 3/ 5mins

Multi-tariff billing, historical data of 31 days and 12 months2 kinds of setting modes: time zone mode and holiday mode

Time zone mode: 2 time zones in one year

Holiday mode: working days ( Mon.- Fri.) and holidays ( Sat.- Sun.)

There are 2 lists of tariff rate, each list can setup 8 periods of time in 24 hours, 4 tariff rates.

Power quality analysisHarmonic analysis, crest and K factor, unbalance etc.

Optional module and upgradeablePluggable in option module, support online upgrade

Setpoint alarmUnder/ over limit alarm, monitoring objects include: U, I, PF, F, THD, unbalance

If any parameters is over or under limit and persists over the specified time, PST700 will record the event, and trip relay output signal.

High accuracyActive energy: according to IEC62053-22, class 0.5s

Reactive energy: according to IEC62053-23, class 2

Small size and thin stylePanel: 96x96x13.5mm Cut-out: 90x90mm,

Depth: 45.1mm (basic unit) + 21.5mm (optional module)

Standard IEC62053-22/ 23, CE. KEMA

PST700 Multifunction Power Meter

Optional module

Basic unit

5


2 analog output (4-20mA)

2 analog input (4-20mA)

Profibus communication

AO

AI

P

The 2nd RS485C

2 relay outputR

2 pulse outputEp

U_unbl, I_unblUnbalance

Max./ min. (U, I, P, Q)Max./ min. value

Voltage/ frequency deviation, Voltage unbalance record

THDu, THDi, TOHDu, TOHDi, TEHDu, TEHDi, HRU, RHI

Voltage crest factor, current K factor, Load rate, Voltage deviation, Frequency deviation

2 status input S

SOE (event log), Real-time clock ( yyyy-mm-dd hh:mm:ss)Record function

Optional Module

Modbus-RTU protocolRS485

3 status input + 2 relay output3DI +2 DO

Harmonic RMS-U, Harmonic RMS-IHarmonic RMS (0-31st )

Harmonic energy (1st -31st )

Power quality analysis

Dmd_I, Dmd_P, Dmd_Q ,Dmd_S

F

kWh and kvarh (4 quadrant), kVAh

PFa, PFb, PFc, PFPa, Pb, Pc, P, Qa, Qb, Qc, Q, Sa, Sb,Sc, SIa, Ib, Ic, In, Iavg

Ua, Ub, Uc, Uab, Ubc, Uca, UL-L avg, UL-N avg

Frequency

Demand & Max. demand

Multi-tariff energy

Real time metering

Harmonic (31st )

Energy

Power factor

Power

Current

Over/ under limit alarmSetpoint alarm

Voltage

Basic Function

Parameter Accuracy Resolution Measuring Range

Voltage 0.2% 0.01V

Direct: 600Vph-ph

PT primary: 0~999.9kVPT secondary: 100Vph-ph or 110V

Current 0.2% 0.001ACT primary: 0~49,999ACT secondary: 1 A or 5A

Power 0.5% 0.1W/var/ VAeach phase: 0~49994MW/ Mvar/ MVA

Total: 0~149982MW/ Mvar/ MVA

Power factor 0.5% 0.001 -1.000~+1.000

Frequency 0.01 0.01Hz 45~ 65 Hz

Active energy 0.5% 0.1kWh 0~ 99,999,999.9 kWh

Reactive energy 2.0% 0.1kvarh 0~ 99,999,999.9 kvarh

THD 1.0% 0.001 0~100.0%

Individual harmonic 1.0% 0.001 0~100.0%

Un-balance 1.0% 0.001 0~100.0%

6


Technical Specification

50MInsulation resistance

Pulse output value: 1000~9999imp/ kWh Pulse width: 60~100ms programmable

Pulse output

AC 2KV/minutePower frequency withstand voltage

4kV (peak), 1.2/50uSImpulse withstand voltage

Metering True RMS, 1 sec refresh time

Input Rate current: 1A or 5ARate voltage: direct 120 ~277Vph-N, (optional)PT secondary: 100Vph-ph or 110V, (optional)

Frequency: 50/ 60Hz

Overload 120% of rated, continuouslyInstantaneous current: 10 times/ secInstantaneous voltage: 2 times/ sec

Status input Wet contact, external power supply

Relay output Node capacity: 250VAC/5A

Surge immunity test (1, 2/50s8/20s) IEC 61000-4-5,Level 3Conducted emissions EN 55022,Class BRadiated emissions EN 55022,Class B

Standard (EMC)

Electrostatic discharge immunity test IEC 61000-4-2,Level 4Radiated immunity test IEC 61000-4-3,Level 3Electrical fast transient/burst immunity test IEC 61000-4-4,Level 4

Dimension & InstallationUnit: mm

Basic unit: approx 400gr.Weight

Power supply 86 ~265VAC99~374VDC

Power loss 2VA

Communication RS485 serial, support Modbus-RTUBaud rate: 2400, 4800, 9600, 19200, 38400bpsAddress: 1~247

Dimension(L x W x H)

Panel: 96 x 96 x 13.5 mmCut-out: 90 x 90 x 45.1 mm (basic)90 x 90 x 66.6 mm (optional module)

IP index IP52 (front panel) and IP30 (case)

Environment Operating temperature: -10~ +55 Storage temperature: -40~ +70 Humidity: 5%~95% non-condensing

Order InformationBasic unit: PST700Note: 1: Current input 5A (optional 1A)

2: Voltage input: 0~600V.3. Default PT secondary 100Vph-ph. (optional 110V)

Optional module

PAIAO

Profibus communication (under development)2 analog input (under development)2 analog output (under development)

2 status input, 2 relay outputThe 2nd RS4852 pulse output

SRC

Ep

Note: 1. Max. 3 modules for 1 meter.

2. Module A can be repeatedly chosen for 1 meter, others can not be repeatedly chosen.

7

Feature Suit for 220V or 240V low voltage system. Simultaneous sampling of Volts and Amps Compact design with all real-time measurement 10 years back-up of integrated energy data LED display, high brightness, auto-scrolling CT ratio programmable Pluggable terminals, easy to install and maintain Panel size: 110 x 65mm Standard: IEC62053-21, CE

Technical SpecificationMetering True RMS, 1 sec refresh time

Input Rate current: 5A (optional 1A)Rate voltage: 220V (optional 240V)Frequency: 50 or 60Hz


Status input 2 channels, external power supply

Relay output 1 channel, Node capacity: 220VAC/5A, 30VDC/5A

Power supply 85~265VAC, 80~300VDC

Power loss 3VA

Communication RS485 serial, support Modbus-RTUBaud rate: 4800 or 9600bpsAddress: 1~247

Environment

Operating temperature: -20~ +60

Storage temperature: -30~ +70

Humidity: 5%~95% non-condensing


Panel: 110 x 65 x 18 mmCut-out: 90 x 44.5 x 55 mm (+0.5mm)


Weight Approx 220gr.

Power frequency withstand voltage AC 2KV/minute

Insulation resistance 50M

Impulse withstand voltage 4kV (peak), 1.2/50uS

Standard (EMC)



PMAC615 Single Phase Digital Panel Meter

Note: Reactive power and power factor can be read via RS485 COM only

One RS485

One relay output

Two status input (wet contact)

COM

DO

DI

Optional FunctionMeasuring RangeResolutionAccuracyParameter

0-99,999,999.9 kWh

45 ~ 65Hz

-1.000 ~ +1.000

0 ~30MW/ Var0 ~ 50,000A

0 ~ 500Vph-ph

0.1kWh

0.01Hz

0.001

0.1 MW/ var

0.001A

0.01V

1.0%

0.01

0.5%

0.5%

0.2%

0.2%

Active energy

Real time metering

Frequency

Power factor

Power

Current

Voltage

Basic Function

Order Information

W

Z

Voltage + Current + Active Energy

Voltage + Current + Active Power + Reactive Power + Power Factor + Frequency + Active Energy

SRCC

Two External Status Input ( wet contact)One Relay Output + One RS485 COMOne RS485 COM

PMAC615----

8

Feature Suit for 220V, or 240V (ph-N) low voltage system Simultaneous sampling of Volts and Amps Compact design with all real-time measurement 10 years back-up of integrated energy data LED display, high brightness, auto-scrolling CT primary is programmable Pluggable terminals, easy to install Panel size: 96 x 96mm Password protect Standard: IEC62053-21, CE

Basic FunctionPMAC625 measures and display one or more parameters listed below:

VoltageUa, Ub, Uc, Uab, Ubc, Uca, CurrentIa, Ib, Ic, In Active power Pa, Pb, Pc, P Reactive power Qa, Qb, Qc, Q Power factorPFa, PFb, PFc, PF Frequency--F Active energykWh Reactive energy-- kvarh

Optional Function Two status input ( wet contact) Two relay alarm output One RS485 communication



Input Rate current: 5A (optional 1A) Rate voltage: 220Vph-N (optional 240V)Frequency: 50/ 60Hz


Status input 2 channels, external power supply

Relay output 2 channels, Node capacity: 220VAC/5A, 30VDC/5A


Power loss 2VA


Approx. 350gr.Weight


Panel: 96 x 96 x 18 mmCut-out: 89.5 x 89.5 x 65 mm (+0.5mm)


Environment Operating temperature: -20~ +60 Storage temperature: -30~ +70 Humidity: 5%~95% non-condensing




Standard (EMC)



PMAC625 Three-phase Digital Panel Meter

9

Dimension & Installation


Voltage 0.2% 0.01V 264V(ph-N), 500V (ph-ph)

Current 0.2% 0.001CT primary: 0~9,999ACT secondary: 1 A or 5A

Power 0.5% 0.1W/ var 9,999 kW/ kvar

Power factor 0.5% 0.001 -1.000~+1.000

Frequency 0.01 0.01Hz 35-65Hz

Active energy 1.0% 0.1kWh 0-99,999,999.9 kWh

Reactive energy 2.0% 0.1kvarh 0-99,999,999.9 kvarh

Order Information

PMAC625 Three-phase Digital Power Meter

W

Z

Voltage + Current + Active Power + Reactive Power + Power Factor + Active Energy

Voltage + Current + Active Power + Reactive Power + Power Factor + Frequency + Active Energy + Reactive Energy

SRC

Two External Status Input ( wet contact)Two Relay Alarm OutputOne RS485 COM

PMAC625---

Note: PMAC625 default rated voltage/ current is 220V/ 5A. Other customized input such as 240V or 1A is available, please mention the requirement before place order.

Example: Model No. PMAC625-W-C, which indicates the device measures voltage, current, active power, reactive power, power factor, active energy, and provide RS485 communication

Unit: mm

10

Feature Suit for LV/ HV voltage system Compact design with all real-time measurement Consist of basic unit and optional modules 10 years back-up of integrated energy data Large LCD, high brightness High accuracy, V or I is 0.2%, kWh is class 1 CT and PT programmable Panel size: 96 x 96mm Password protect Standard: IEC62053-21/ 23, CE

Basic FunctionPMAC720 provides one RS485 communication,

measures and display real-time parameters:

VoltageUa, Ub, Uc, Uab, Ubc, Uca, CurrentIa, Ib, Ic, In Active power Pa, Pb, Pc, P Reactive power Qa, Qb, Qc, Q Power factorPFa, PFb, PFc, PF Frequency--F Active energykWh Reactive energy kvarh Optional Module

4 status input (dry contact) + 4 relay output 8 status input (dry contact) + 2 relay output 4 status input (wet contact) + 4 relay output 8 status input (wet contact) + 2 pulse output 2 pulse output + 2 analog outputStatus input apply to monitoring various kinds of switch status

Relay output apply to monitoring over limit alarm with setpoint system

Pulse output apply to exporting pulse signal for active/ reactive energy


Optional Function Up to 31st harmonic analysis Clock and SOE (event log) TOU (multi-tariff) Two RS485 communication port One 4~20mA analog input One 4~20mA analog output

Basic unit Optional module


Input Rate current: 5A (optional 1A)Rate voltage: direct 120 ~277Vph-N, (optional)

PT secondary 57.7V/ 100V Frequency: 50/ 60Hz


Status input (optional)

8 channels, provides 30VDC power if it is dry contact

Relay output (optional)

4 channels, Node capacity: 220VAC/5A, 30VDC/5A

Analog output (optional)

2 channels, 4~20mA, load resistance: 400

Pulse output (optional)

2 channels,48~50VDC for external connection


Power loss 2VA





Weight Approx. 500gr.




PMAC720 Multifunction Power Meter

11

Standard (EMC)

Electrostatic discharge immunity test IEC 61000-4-2 Edition 2.0 (2008)RF immunity test IEC 61000-4-3 Edition 3.0 (2007)Electrical fast transient/burst immunity test IEC 61000-4-4 Edition 2.0 (2004)Surge immunity test (1, 2/50s8/20s) IEC 61000-4-5 Edition 2.0 (2005) Conducted emissions EN 61326-1:2006, CISPR 11:2004Radiated emissions EN 61326-1:2006, CISPR 11:2004

Environment

Operating temperature: -20~ +60 Storage temperature: -30~ +70 Humidity: 5%~95% non-condensing


One 4~20mA analog outputAOOne 4~20mA analog inputAI

PMAC-Feature

720N 720A 720B 720C 720D 720E

U-LL, U-LN, 3I, In, 3P, P, 3Q, Q,F, 3PF, PF, kWh, kvarh,

RS485 communication

4 status input (dry contact) + 4 relay output 8 status input (dry contact) + 2 relay output 4 status input (wet contact) + 4 relay output 8 status input (wet contact) + 2 relay output 2 pulse output + 2 analog output (4~20mA)

H Up to 31st harmonic analysis T Clock and SOE (event log) function F TOU ( time-of-use) M Two RS485 communication ports

Apparent power Demand function Remark: = standard feature, =optional function = conditional function1. If select -F, -T should be selected also.2. Analog port-AI and AO are incompatible feature, can not be selected together3. For module PMAC720N-, PMAC720E- , the SOE function is invalid.


Voltage 0.2% 0.01V

Directly: 300Vph-N, 520Vph-ph

PT primary: 0~599,999VPT secondary: 57.7Vph-N, 100Vph-ph


Power 0.5% 0.1W/ vareach phase: 0~100 MW/ Mvar

Total: 0~300 MW/ Mvar

Power factor 0.5% 0.001 -1.000~+1.000



Reactive energy 2.0% 0.1kvarh 0~ 99,999,999.9 kVarh


Un-balance 1.0% 0.001 0~100.0%

12


Order Information

NABCDE

Basic ModuleBasic Module + 4 Status Inputs (Dry Contact) + 4 Relay Outputs Basic Module + 8 Status Inputs (Dry Contact) + 2 Relay Outputs Basic Module + 4 Status Inputs (Wet Contact) + 4 Relay OutputsBasic Module + 8 Status Inputs (Wet Contact) + 2 Relay Outputs Basic Module + 2 Pulse Outputs + 2 Analog Outputs (4-20mA)

HTFM

Up to 31st Harmonic AnalysisClock and SOE (Event Log) FunctionTOU (Time- of- Use)Two RS485 Communication Ports

AIAO

One 4-20mA Analog InputOne 4-20mA Analog Output

V1V2V3V4V5V6V7

57.7/ 100V (via PT), 5A57.7/ 100V (via PT), 1A220/ 380V (direct), 5A220/ 380V (direct), 1A120/ 208V (direct), 5A240/ 415V (direct), 5A277/ 480V (direct), 5A

PMAC720---- ----

Example: Model No. PMAC720-A-H-AO-V1, which indicates the device provides basic function + 4 status input + 4 relay output + harmonic analysis + one analog output, rated input 57.7/ 100V, 5A

unit: mm


13


Feature Suit for LV/ HV voltage system Compact design with all real-time measurement Build-in clock and event logging Phase failure alarm 10 years back-up of integrated energy data Large LCD, high brightness High accuracy, V or I is 0.2%, kWh is class 1 CT and PT programmable Pluggable terminals, easy to install Panel size: 96 x 96mm Password protect Standard: IEC62053-21/ 23, CE

Basic FunctionPMAC727 provides one RS485 communication,


VoltageUa, Ub, Uc, Uab, Ubc, Uca, Voltage unbalance rate UL-L unbal, UL-N unbal CurrentIa, Ib, Ic, In Current unbalance rate I unbal Active power Pa, Pb, Pc, P, power load rate Reactive power Qa, Qb, Qc, Q Power factorPFa, PFb, PFc, PF Frequency--F Active energykWh Reactive energy kvarh 31st harmonic & THD Temperature of switch box/ cable

Basic Data Recording Function Record data once per hour ( last 24 hours) Record the Avg/ Max./ Min. data of every day (last 31 days) Record energy consumption hourly ( last 24 hours), daily

(last 31 days), and monthly (last 12 months)

Record phase failure event, max. 30 events Record over-limit event, max. 200 events


Input Rate current: 1A or 5ARate voltage: direct 120 ~277Vph-N, (optional)

PT secondary 57.7V/ 100V Frequency: 50/ 60Hz





Approx. 500gr.Weight


Environment


Power loss 2VA






Standard (EMC)



14

0~100.0%0.0011.0%THD

0~100.0%0.0011.0%Un-balance

0~1501 1Temperature


Voltage 0.2% 0.01V




Power 0.5% 0.1W/ var each phase: 0~100 MW/ Mvar

Power factor 0.5% 0.001 -1.000~+1.000






Fundamental RMS voltage

Harmonic Ratio for Voltage (3-31st)

Total Harmonic Distortion for Voltage (THDu)

Total Harmonic Distortion for Current (THDi)Harmonic Ratio for Current (3-31st)Fundamental RMS current

Frequency

and daily (last 31 days),monthly (last 12 months)

Active energy kWh (present & total)Reactive energy kvarh (present & total)

Power factorPFa, PFb, PFc, PFReactive power Qa, Qb, Qc, QLoad rateActive power Pa, Pb, Pc, P

I unbal

CurrentIa, Ib, Ic, InUL-L unbal, UL-N unbalVoltageUa, Ub, Uc, Uab, Ubc, Uca,

Model PMAC727 Data Record Function

Measuring Parameters Record data per hour (last 24 hours)

Record Avg./ Max./ Min. data of every day (last

31 days)Over-limit record

15



Order Information

V1V2V3V4V5V6V7


PMAC727--

Example: Model No. PMAC727-V1, which indicates the device provides all basic function, rated input 57.7/ 100V, 5A

unit: mm

16

Feature Suit for LV/ HV voltage system Compact design with all real-time measurement Consist of basic unit and optional modules 10 years back-up of integrated energy data Large LCD, high brightness High accuracy, V or I is 0.2%, kWh is class 1 CT and PT programmable Pluggable terminals, easy to install Panel size: 96 x 96mm Password protect Standard: IEC62053-21/23, CE

Basic FunctionPMAC735 provide one RS485 communication,


VoltageUa, Ub, Uc, Uab, Ubc, Uca, Voltage unbalance rate UL-L unbal, UL-N unbal CurrentIa, Ib, Ic, In Current unbalance rate I unbal Active power Pa, Pb, Pc, P Reactive power Qa, Qb, Qc, Q Apparent powerSa, Sb,Sc, S Power factorPFa, PFb, PFc, PF Frequency--F Active energykWh (4 quadrant) Reactive energy kvarh (4 quadrant) Demand and Max. record for I, P, Q, S Max./ Min. value

Optional Module 4 status input + 4 relay output 8 status input + 2 relay output 8 status input + 2 pulse output Profibus communication moduleStatus input apply to monitoring various kinds of switch status

Relay output apply to monitoring over limit alarm with setpoint system

Pulse output apply to exporting pulse signal for active/ reactive energy

Profibus supports high speed bus communication up to 1.5M, and

Compatible with SIEMENS Profibus communication system.

2 channels, 4~20mA, load resistance: 400

Analog output (optional)

2 channels,48~50VDC for external connection

Pulse output (optional)


8 channels, provides 30VDC power if it is dry contact

120% of rated, continuouslyInstantaneous current: 10 times/ secInstantaneous voltage: 2 times/ sec

Rate current: 1A or 5ARate voltage: direct 120 ~277Vph-N, (optional)

PT secondary 57.7/ 100V Frequency: 50/ 60Hz

True RMS, 1 sec refresh time

Overload

Input

Relay output (optional)

Status input (optional)

Metering

85~265VAC, 80~300VDCPower supply

2VAPower loss

RS485 serial, support Modbus-RTUBaud rate: 4800 or 9600bpsAddress: 1~247

Communication

Approx. 500gr.

IP54 (front panel) and IP20 (case)


IP index

Weight


4kV (peak), 1.2/50uS

Impulse withstand voltage



Optional Function Up to 31st harmonic analysis, K factor, THD SOE (event log) One 4~20mA analog output



17

Electrostatic discharge immunity test IEC 61000-4-2,Level 4Radiated immunity test IEC 61000-4-3,Level 3Electrical fast transient/burst immunity test IEC 61000-4-4,Level 4Surge immunity test (1, 2/50s8/20s) IEC 61000-4-5,Level 3Conducted emissions EN 55022,Class BRadiated emissions EN 55022,Class B

Standard (EMC) Environment


SOE

One 4-20mA analog outputRemark: = standard, =optional

Harmonic analysis, K factor

4 status input + 4 relay output

8 status input + 2 pulse output

8 status input + 2 relay output

735P

735E

735B

U-LL, U-LN, 3I, In, 3P, P, 3Q, Q, 3S, S, F, 3PF, PF, kWh, kvarh, Demand& maximum recording,Unbalance rate, Build-in clock,Max./min. recording, RS485 communication

Profibus communication

735A735NModel PMACFeature

0~100.0%0.0011.0%THD

0~100.0%0.0011.0%Un-balance


Voltage 0.2% 0.01V





Power factor 0.5% 0.001 -1.000~+1.000






18

Order Information

Example: Model No. PMAC735-A-H-V1, which indicates the device provides basic function + 4 status input + 4 relay output + harmonic analysis, rated input 57.7/ 100V, 5A

One 4-20mA Analog Output AO


V1V2V3V4V5V6V7

SOE (Event Log) FunctionT

Up to 31st Harmonic Analysis, THD, K FactorH

NABEP

Basic ModuleBasic Module + 4 Status Inputs (Dry Contact) + 4 Relay Outputs Basic Module + 8 Status Inputs (Dry Contact) + 2 Relay Outputs Basic Module + 8 Status Inputs (Dry Contact) + 2 Pulse OutputsBasic Module + Profibus Module

PMAC735---- ------


AuxiliaryModule

PMAC735

unit: mm


19

Feature Suit for LV/ HV voltage system True-RMS measuring parameters Power quality analysis, over limit alarm Integrated measure, analyze, control and protect function Use DSP chip to process voltage and current signal Graphical data, easy and clearly for reading Large and color LCD, high brightness 10 years back-up of integrated energy data High accuracy, V or I is 0.2%, kWh is class 1 Panel size: 126.7 x 126.7mm Password protect Standard: IEC62053-21/ 23, CE

PMAC760 Intelligent Power Quality Analyzer

U_unbl, I_unblUnbalance

Phase angle

USB

Ethernet communication port, 10M, UDP/ TCP Server/ TCP Client Ethernet

USB 2.0 communication port

Event log and real time clockSOE and Clock

Optional Function

Modbus-RTU protocolRS485

4 status input + 4 relay outputDI/ DO

THDu, THDi, TOHDu, TOHDi, TEHDu, TEHDi2nd-31st harmonic (display), 32nd -63rd harmonic (COM)

Voltage deviation

Harmonic

Frequency deviation Power quality analysis

F

Dmd_I, Dmd_P, Dmd_Q ,Dmd_S

Max._U, Max._I, Max._P, Max._QMin._U, Min._I, Min._P, Min._Q

kWh and kvarh (4 quadrant), kVAh

PFa, PFb, PFc, PFPa, Pb, Pc, P, Qa, Qb, Qc, Q, Sa, Sb,Sc, S

Ia, Ib, Ic, In, Iavg

Ua, Ub, Uc, Uab, Ubc, Uca, UL-L avg, UL-N avg

Max./ Min. value

Demand

Frequency

Real time metering

Voltage fluctuate

Energy

Power factor

Power

Current

Over/ under limit alarmSetpoint alarm

Voltage

Basic Function

20


4 channelsDry contact (internal 30VDC power supply)

120% of rated, continuouslyInstantaneous current: 10 times/ secInstantaneous voltage: 2 times/ sec

Rate current: 1A or 5ARate voltage: direct 120 ~277Vph-N, (optional)

PT secondary 57.7/ 100V Frequency: 50/ 60Hz

True RMS, 1 sec refresh time

Overload

Input

Relay output

Status input

Metering

85~265VAC, 80~300VDCPower supply

10VAPower loss

Approx. 760gr.

IP54 (front panel) and IP20 (case)

Panel: 126.7 x 112.7 x 13 mmCut-out: 119 x 105 x 91 mm (+0.5mm)

IP index

Weight


Voltage wave SOE event log Harmonic Phase vector

LCD display graphical data

Multi-communication

4kV (peak), 1.2/50uS

Impulse withstand voltage



Electrostatic discharge immunity test IEC 61000-4-2,Level 4Radiated immunity test IEC 61000-4-3,Level 3Electrical fast transient/burst immunity test IEC 61000-4-4,Level 4Surge immunity test (1, 2/50s8/20s) IEC 61000-4-5,Level 3Conducted emissions EN 55022,Class BRadiated emissions EN 55022,Class B

Standard (EMC) Environment




21


SHLD

COMSHLD

Order Information


V1V2V3V4V5V6V7

Ethernet port

USB port

N

U

PMAC760----

Example: Model No. PMAC760-N-V3, which indicates the device provides basic function + Ethernet communication port, rated input 220/ 380V, 5A

Unit: mm


0~100.0%0.0011.0%THD

0~100.0%0.0011.0%Un-balance


Voltage 0.2% 0.01V





Power factor 0.5% 0.001 -1.000~+1.000





22

PMAC901 Single Phase Din-rail Energy MeterPMAC903 Three Phase Din-rail Energy Meter

Basic Function Measure and display kWh value One RS485 communication Support Modbus-RTU Other real time data via RS485: V, I, P, Q, S, PF, F

Feature Suit for 220V AC low voltage system 6 +1 digits LCD display (999999.9 kWh) kWh accuracy class 0.5S LED indicates pulse, reverse energy 3 keys for programming CT programmable, pulse output 35mm DIN rail installing, standard DIN ED5002 High temperature resistant materials Spring type buckle, easy to install Standard: IEC62053-21/ 22/23, CE, KEMA

Optional Function Multi-tariff Reactive energy measuring Demand analysis

ParameterAccuracy

Resolution Measuring RangePMAC901 PMAC903

Voltage 0.2% 0.2% 0.01V 198V~242V (L-N)

Current 0.2% 0.2% 0.001A 0.5~4995A

Active power 0.5% 0.5% 0.1W 0~1MW

Reactive power No 1.0% 0.1Var 0~1Mvar

Apparent power 0.5% 0.5% 0.1VA 0~1MvA

Power factor No 0.5% 0.001 -1.000~+1.000

Frequency No 0.01 0.01Hz 45Hz~65Hz

Active energy Class 0.5S Class 0.5S 0.1kWh 0~999999.9 kWh

Reactive energy No Class 2 0.1kVarh 0~999999.9 kvarh

2VAInput consumption

AC 220Vph-N, 50Hz (optional 120V, 60Hz)Rated voltage

Rated current 10(40)A, 10(60)A, 20(100)A or 5A/ CT

Overload 115% of rated

Pulse output 1 or 2 channels

Pulse output value PMAC901:1000imp/kWhPMAC903: 400imp/ kWh (40A or 60A)

200imp/ kWh (100A)3600imp/ kWh (5A/ CT)

PMAC901: 1-phase 2-wirePMAC903: 3-phase 4-wire

Connection mode


Environment

RS485 serial, Modbus-RTUBaud rate: 4800 or 9600bpsAddress: 1~247

Communication

Self supply, 220VAC, 50-60HzPower supply

80 msImpulse duration

Com

mun

icat

ion

data

Dis

play

da

ta


Standard (EMC)



23

Dimension

Order Information

TOU (Multi-tariff)Reactive energy measuring (only available for PMAC903)Demand analysis (only available for PMAC903)

FQD

Rated current: 10 (40)ARated current: 10 (60)ARated current: 20 (100)ARated current: 5A / CT (when In>100A, connect via CT)

4060

1005

C One RS485 communication

10.5S

Active energy accuracy: Class 1Active energy accuracy: Class 0.5S

PMAC901---- ----PMAC903---- ----

Note: PMAC901, 903 default rated voltage 220V, frequency 50Hz. Other customized input such as120V or 60Hz is available, please mention the requirement before place order.

Example 1: Model No. PMAC901-C-1-40-F, which indicates the device provides basic function, rated current is 40A (direct), accuracy class 1, and measure multi-tariffExample 2: Model No. PMAC903-C-1-5-Q, which indicates the device provides basic function, rated current is 5A/ CT, accuracy class 1, and measure reactive energy

PMAC903PMAC901

75.0mm

94.0mm

45.0mm

50.0mm65.0mm

35.7mm R PMAC903

125.5mm

94.0mm

35.7mm

45.0mm

50.0mm65.0mm

PMAC901 Single Phase Din-rail Energy MeterPMAC903 Three Phase Din-rail Energy Meter

24

PMAC905 Multifunction Energy Meter

Feature Suit for LV/ HV voltage system CT and PT programmable kWh accuracy class 0.5S Password protect Panel size: 96 x 96mm Pluggable terminals, easy to install Large high-contrast LCD Two pulse output Standard: IEC62053-22/ 23, CE, KEMA

Basic FunctionPMAC905 measure and display real-time parameters:

VoltageUa, Ub, Uc, Uab, Ubc, Uca, CurrentIa, Ib, Ic, In Active power Pa, Pb, Pc, P Reactive power Qa, Qb, Qc, Q Apparent powerSa, Sb,Sc, S Power factorPFa, PFb, PFc, PF Frequency--F EnergykWh, kvarh (4 quadrant)

Optional Function Statistics of multi-tariff energy: 8 periods of time, 4 different tariff Record historical energy value: (kWh & kvarh) data of last 31 days/ 12

months

One RS485 communication (Modbus)



Voltage 0.2% 0.01V



Power 0.5% 0.1W/ Var/ VA 0~100 MW/ MVar/ MVA

Power factor 0.5% 0.001 -1.000~+1.000

Frequency 0.01 0.01Hz 35Hz~65Hz

Active energy Class 0.5S 0.1kWh 0~999999.9 kWh

Reactive energy Class 2 0.1kVarh 0~999999.9 kvarh

3-phase 3-wire, 3-phase 4-wireConnection mode

1A or 5ARated current

yesCT earth connection (secondary)

50/ 60HzFrequency

direct 120 ~277Vph-N, (optional) PT secondary 57.7/ 100V

Rated voltage

Power consumption 3VA

Overload 120% of rated


Environment

50msImpulse duration (width)

1000~9900 imp/kWh programmablePulse output value

2 channelsPulse output

RS485 serial, Modbus-RTUBaud rate: 4800 or 9600bpsAddress: 1~247

Communication

85 to 265VAC or 100 to 300VDCPower supply



Standard (EMC)


25


V1V2V3V4V5V6V7

One RS485 communicationC

F Statistics of multi-tariff energy

D Record historical energy value

PMAC905---- ----

96mm

96mm

89.5

56.5

9.0 46.7 18.390mm

90mm

Note: Other customized input such as 110V or 1A is available, please mention the requirement before place order.

Example: Model No. PMAC905-F-D-V3 , which indicates the device provides basic function, auxiliary statistics and record function. Rated input is 220V/380V, 5A.

PMAC905 Multifunction Energy Meter

Order Information


Unit: mm

26

PMAC915 Three Phase Multi-tariff kWh Meter

Feature

LCD display With the DSP technology and the real-time high speed calculation, it guarantees the

measuring accuracy in the case of big load wave and harmonic waves.

2MB large data storage, can be extended to 4MB Keep high accuracy from 1% In to 600% In Three phase power source supply, but even there is only one phase work, the meter

will keep running.

Read the meter at power failure, can still read the meter by the button or with infrared function

310(40)A, 320(80)A, 330(100)A

3220/380V

Class 2

Direct connect

CT connect

Direct connect

PT connect:

Reactive energy

Active energy

-40C to +70CStorage

-20C to +60COperating temperature


5104 h MTBF15 YearsService life

IEC62052-11/21IEC62053-21/22/23IEC62056-21/ 42/ 53/ 61/ 62

Standard

Approx. 1.8 kgNet weight

290mm x 170mm x85mmDimension

0.5s /d (23C)Clock error

0.001 InStart current

50Hz 5%Reference frequency

0.7Un ~1.3UnVoltage range

85%Relative humidity

Unit: mm

PMAC915 Three Phase Multi-tariff kWh Meter

28

PMAC921 Single Phase Multi-tariff kWh Meter

Feature

LCD display Measure active energy, no need to calibrate for a long working time LSI design, less spare part, low power consumption, simple structure. Keep a good linear error within the range 1%Ib~Imax. Use quality component with long service life, reliable accuracy, cannot be affected by

the frequency, temperature, voltage, harmonic.

Function

Measure reverse and forward energy, and reverse energy is measured as forward energy Timely single phase power consumption measurement with 3 tariffs and 12 time periods Automatically read and store the energy, it can store 12 months data Real time Clock RS485 communication port realize remote meter concentrative reading. Infrared communication port to realize point to point communication. Waking up the meter by pressing the key and meter reading function during power off.

-40C to +70CStorage

-25C to +55COperating temperature

PILOT reserves the right to modify features without prior notice in view of continued improvement

Zhuhai Pilot Technology Co., Ltd.Add: No. 15, Keji 6 Road, Chuangxin Haian, Tangjia Hi-tech Zone, Zhuhai, Guangdong, China Post Code: 519085Tel: +86 756 3629687/ 3629673 Fax: +86 756 3629600/ 3629700 Email: [email protected] http://www.pmac.com.cn

Your representative

Documents

PMAC Catalogue 2012