-
7/30/2019 PMB plant
1/23
Bitumen mixing plant Supplier
Jiaxing Mide machinery Co.,Ltd.Mike Zhang
Cell:+86 1375077669
E-mail:[email protected]
MIDE
-
7/30/2019 PMB plant
2/23
About us
Jiaxing Mide Mechanical Co.ltd is located in Xinfeng Industrial
park,Jiaxing city, which is very close to Shanghai China.
Jiaxing Mide Engineering Co., Ltd is a technology
corporationspecialized in assembling producing and selling of
bitumen mixingequipments. In addition, it researches and develops
asphalt equipmentsindependently.
Jiaxing Mide is a company of people-oriented, who pays much
attentionto technological innovation. We have an experienced team
who arespecialized in designing, researching, development and
manufacturing.We promise that we will reach a mutual favorable goal
by providinglatest project resolutions and meet the needs and
expectations with ourcontinuous efforts.
MIDE
-
7/30/2019 PMB plant
3/23
Our service
Our Products:
Research asphalt emulsion colloid mill
Bitumen emulsion research plant
Bitumen emulsion colloid mill
Bitumen emulsion plant
PMB Mills
Single Pass PMB Plants
Basic manual cohesion testerWet track abrasion tester
Loaded wheel tester
Sweep tester for the chip seal
Sweep tester for bitumen emulsion cold recycling
We can help customers to installation, commissioning, providing
spare partsimported products, all correspondence ,Can apply for
purchase.
Welcome customers to visit us
MIDE
-
7/30/2019 PMB plant
4/23
Lab colloid mill for bitumen emulsion
MIDE
Introduction:
The MIDE Research colloid mill is designed and built to ensure a
high quality in
your research will all types of cationic, anionic and non-ionic
emulsions.
The mill made in SS316l to guarantee corrosion resistance
running with low PH
emulsion
Specifications
Voltage: 230/400VAC Amp: 5.9/3.4A
Speed: 2870RPM
Motor: 1.5kw
The lab colloid mill consisting of the following parts
Colloid mill with special AC motor
Pipe system with FUNEL to receive the bitumen and other
ingredients re-circulation pipe system and sample valve
Electrical box with start/stop, thermostat motor protection
PE base plate with rubber shock absorber
-
7/30/2019 PMB plant
5/23
Polymer modified bitumen emulsion research plant
Instructions
MD-300 Bitumen emulsion plant isdesigned and build to ensure a a
high qualityin your research will all type bitumenemulsion,
epically for SBS polymermodified bitumen emulsion .
Our high quality components and materialsare used to ensure best
possible operationalreliability.
Our research plant represents the state of theart within all
specters of the research
possible tin the bitumen emulsion sector,and is in principle
designed and equipped asour bitumen emulsion plant, but down scaled
to capacities of 200-350L/H
Specifications
Type: MD-300Voltage: 5KW, 380VAC
Weight; 300KG
Size: (1.35*0.6*1.25)M
MIDE
-
7/30/2019 PMB plant
6/23
Polymer modified bitumen emulsion
research plant
Principle of operation
A sparrow may be small,
but it has all the vital organs.
MIDE
-
7/30/2019 PMB plant
7/23
Bitumen emulsion colloid mill
InstructionsMIDE bitumen emulsion colloid mills
are designed for production of bitumen
Emulsion as well as polymer modified
bitumen emulsion , the rotor and stator
system is optimized to provide a fineand narrow particle
disruption , which
gives the emulsion and increased
stability .
the colloid mill is make in SISI316L
stainless steel and better to guaranteecorrosion resistance
running low PH
emulsion
MIDE
Stator and Rotor
-
7/30/2019 PMB plant
8/23
Bitumen emulsion mill
MIDE
-
7/30/2019 PMB plant
9/23
Specifications
MIDE
-
7/30/2019 PMB plant
10/23
Bitumen emulsion plant
Instructions
MIDE bitumen emulsion plant is designed and built to ensure a
high andconsistent quality of the bitumen emulsion plant , the core
parts is made in
329 double Stainless steel
MIDE bitumen emulsion batch emulsion with continue operating
system
offers high production flexibility and is suited for very
complex types of
emulsion
The batch emulsion plant gives you:
High and constant product quality
Easy operation and safe material handling
Energy from outgoing emulsion is used for heating the process
water
Technical specifications
The plant is mounted on a steel frame in galvanised steel with
inner pipline and
controller
MIDE
-
7/30/2019 PMB plant
11/23
Bitumen emulsion plant
MIDE bitumen emulsion plantIncluding below units
the soap system
The bitumen system
The mill system
The emulsion cooling system
The production control system
The soap prepare system
MIDE
-
7/30/2019 PMB plant
12/23
Bitumen emulsion plant
MIDE
-
7/30/2019 PMB plant
13/23
Principle of operation for emulsion plant
MIDE
-
7/30/2019 PMB plant
14/23
Polymer modified mill
MIDE
-
7/30/2019 PMB plant
15/23
Polymer modifier bitumen plant
Instructions
The design of the MIDE polymer modified bitumen (PMB) plants is
based on todaysgrowing demands for polymer modified bitumen. Unlike
most plants on the market our
plants are designed as an in-line system. This offers many
advantages such as a high
production capacity of up to 60 tons/hour, no need for premix of
bitumen and polymer
products, because all is added continuously during production
and a very exact control of
dosage of bitumen and polymer products.
The PMB plants are building in ISO container frame and are
therefore suitable both as
stationary and mobile units. All plants are equipped with a
unique control system which
guaranties easy operation and a constant and homogeneous
production. This together with
the rest of the plants advantages will result in polymer
modified bitumen of high quality
in each and every production.
Specifications
MIDE
-
7/30/2019 PMB plant
16/23
Movable PMB plant
MIDE
-
7/30/2019 PMB plant
17/23
Principle of operation for PMB plant
MIDE
-
7/30/2019 PMB plant
18/23
Basic Manual Cohesion Tester
Specifications
30cmX 43 cmX 43 cmWeight: 25 kg
Complete with air hose
Regulator
Gauge in psi. and kPa.
100 sheets of 100mmX100mmroofing felt for sample
preparation
Sample rings
Spare rubber foot
Torque wrench
MIDE
Instructions
This unit is used to measure cure rates of slurries and
microsurfacings.This is critical in design of mixes and is a part
of the standardspecification of most authorities including the
International SlurrySurfacing Association. It is essential for ASTM
D-3910 testing andISSA TB 139.
-
7/30/2019 PMB plant
19/23
MIDE
Wet track abrasion tester
Instructions
This unit is used to measure the lower limit of bitumen content
and abrasion resistance inslurries and microsurfacings. This is
critical in design of mixes and is a part of the
standard specification of most authorities including the
International Slurry Surfacing
Association. It is essential for ASTM D-3910 ISSA TB 100.
Specifications
Type: N-5077cm X 77 cm X 99 cm
Weight: 137 kg
Complete with strike off dowel
Squeegee with mixing bowl
Specimen molds
10 pieces of roofing felt
Spare abrasion rubbers
Choice of electrical motors to suit
-
7/30/2019 PMB plant
20/23
Loaded Wheel Tester
Instructions
This unit is used to measure the upper limit of bitumen content
and deformation resistance
in slurries and micro surfacing. This is critical in design of
mixes and is a part of thestandard specification of most
authorities including the International Slurry Surfacing
Association. It is essential for ISSA TB 109 and 147 A.
Specifications
Type : LWT-50
41cm X 43cm X 143cm
Weight: 96 kg
Complete with molds.
20 mounting plaques
Sand frame
Cover
Ottawa Sand
Lead shots not included
Choice of electrical motors to suit
MIDE
-
7/30/2019 PMB plant
21/23
An aggregate retention tester( chip seal)
InstructionsComplete per ISSA TB100.ASTM D7000, Modified
HobartA-120 mixer, includes quick
clamp mounting base, spunaluminum pan, Sweep HeadAttachment for
Hobart
Specificationstype: A-120
MIDE
-
7/30/2019 PMB plant
22/23
Sweep tester for cold recycling
Instructions
Complete per ISSA TB100.Modified Hobart A-120 mixer,includes
quick clamp mountingbase, special design quickchange abrasion head,
raisedlip specimen mould (1/4), 5pre-cut Parker 3292 abrasionhose,
10 pcs
SpecificationType: HL-120
MIDE
-
7/30/2019 PMB plant
23/23
Technical Specifications?
Please do not hesitate to contact us.
If you need more information about us and our products,
we would be pleased to receive your request.
Jiaxing Mide Machinery Co., LtD,Add: Rm202 ,No.93. Daqiao Road.
Danghu
Street. Pinghu City Zhejiang Province
P.R.C 314200
Cell +86 13750776695
Tel +86 573 89500395Fax +86 573 89500390
Email: [email protected]
MIDE
