Upload
eltontimm
View
214
Download
0
Embed Size (px)
Citation preview
8/20/2019 PP47-13.pdf
1/3
P R I N T E D C O P I E S O F T H I S D O C U M E N T A R E U N C O N T R O L L E D
NO DEVIATION FROM THE CONSTRUCTION DEFINED BY AN APPROVED SAMPLE OR DETAILED SPECIFICATION (ON FILE IN THE ORDERING
DIVISIONS ENGINEERING DEPARTMENT) WILL BE MADE WITHOUT WRITTEN APPROVAL FROM THE ORDERING DIVISIONS
ENGINEERING DEPARTMENT.
This document and the information contained therein is proprietary to Carrier Corporation and shall not be used or disclosed to
others, in whole or in part, without the written authorization of Carrier Corporation.
Filename: PP47-13.DOC Savedate: 5/25/2009 10:56:00 AM User: CMS
DOC. NO. LAST NO.
A United Technologies Company
Carrier P.O. Box 4808Carrier Parkway
Syracuse, New York 13221 PP47-13
Material SpecificationISSUE
DATE
PAGE1
OF3
TITLE: SUPERSEDES DOC. NO. DATED
POE Lubricant, ISO VG220 (Gen. Purpose w/o Lubricity Additives)
INITIATED BY / DATE MANAGEMENT APPROVAL / DATE AUTHORIZATION NO. REVISION
Steve Shoulders 5/26/09
Dave Rockwell 5/26/09REFERENCE: STATUS:
ORIGINATED (C) = CRITICAL CHARACTERISTICS
NA = NOT APPLICABLE
APPROVAL COPY
SCOPE: This specification establishes the requirements for inhibited polyolester based synthetic compress
lubricant containing no lubricity enhancing additives. This material is suitable for use in screw compresso
for general purpose refrigeration and air conditioning applications.
MATERIAL: For Carrier plants to purchase materials covered by this specification, and be used in Carri
products, the material must be approved by Engineering and the supplier’s quality system must b
Qualified/Certified by the Carrier user plant.
SUPPLIER APPROVAL: Carrier may elect to test, in accordance with the requirements of this specificatio
a quantity of material necessary to give valid results. The material must be supplied from a production ru
using standard production methods. Only material that has met all requirements will be classified
“approved”. Approved suppliers are listed on the last page of this specification.
SUPPLIER QUALIFICATION/CERTIFICATION: The Carrier user plant, or designated lead purchasin
plant, must qualify/certify all suppliers of production materials in accordance with the existing Carri
Supplier Quality Assurance Requirements.
PERFORMANCE REQUIREMENTS:The following requirements shall be met by all materials covered by this specification.
METHOD
1. ISO Viscosity Grade 220 ASTM D2422
2. Viscosity, cSt at 40C (104F) 198 to 242 ASTM D445
cSt at 100C (212F) 18 to 21
3. Viscosity Index (Typical) 120 ASTM D2270
4. Density (g/ml) @ 20C .973 - .981 ASTM D1298
5. Pour Point, F (C) 14 (-10) max. ASTM D97
6. Flash Point, F (C) (COC) 392 (200) min. ASTM D92
8/20/2019 PP47-13.pdf
2/3
PAGE 2 OF 3
TITLE: DATE DOCUMENT NUMBER
POE Lubricant, ISO VG220 (Gen. Purpose w/o Lubricity Additives) 5/26/09 PP47-13
This document and the information contained therein is proprietary to Carrier Corporation and shall not be used or disclosed to
others, in whole or in part, without the written authorization of Carrier Corporation.
Filename: PP47-13.DOC Savedate: 5/25/2009 10:56:00 AM User: CMS
7. Moisture Content, (ppm) 50 max. ASTM D1533
8. Acid Number, mg KOH/g 0.05 max. ASTM 974
9. Miscibility Range with R-22 F(C) -90 to 200 (-68 to 93)
with R-134a F(C) 10 to 180 (-12 to 82)
10. Copper Corrosion Test, 3 hrs. at 100C (212F) Class 1A min. ASTM D130
11. Dielectric Strength (0.1 in. gap) 25 kV min. ASTM D877
12. Anti-Wear Characteristics < 45 mg of wear ASTM D-2670 Falex Method, 30
min. R134a bubbling through the
oil at 400 lb. load, no temp.
control.
13. Sealed Tube Stability with Copper and Steel ASHRAE 97, 175C for 14 days
- TAN (mg KOH/g) < 0.5
- Oil and R134a < 0.1% R-134a decomposition
- Oil and R12 < 2.5% R-22 formed
14. Hydroxyl Number (mg KOH/g) < 4.5 ASTM D1957
15. Hydrolytic Stability: TAN (mg KOH/g) < 1.0 800 ppm H20 121C, 7 days
SPECIAL REQUIREMENTS:Qualification Testing: Oil submitted for qualification testing must represent current production and be
accompanied by the latest OSHA 20 form (MSDS). The sample will be tested for compliance to the tests in
Performance Requirements and any other CML Product Engineering deems necessary (e.g., a trial production
or field test).
Acceptance And Rejection: Incoming shipments of oil may be tested for conformance to any or all of th
requirements listed in the Performance Requirements. The oil shall also be tested for conformance to the fi
sample using gas chromatography. Failure to pass any of the tests may be cause for rejection of the shipmen
MATERIAL SAFETY DATA SHEET:
All materials covered in this specification must have a recent (< 2 years old) copy of an OSHA 20 for(MSDS) or applicable regional form disclosing hazardous material content on file in the Corporate Industri
Hygiene Department. Suppliers must supply a copy with each material submitted for qualification or upo
changes in material content or rules governing such disclosures. The Engineering Department requesting th
specification is responsible for delivering the correct form to the Corporate Industrial Hygiene Department.
8/20/2019 PP47-13.pdf
3/3
PAGE 3 OF 3
TITLE: DATE DOCUMENT NUMBER
POE Lubricant, ISO VG220 (Gen. Purpose w/o Lubricity Additives) 5/26/09 PP47-13
This document and the information contained therein is proprietary to Carrier Corporation and shall not be used or disclosed to
others, in whole or in part, without the written authorization of Carrier Corporation.
Filename: PP47-13.DOC Savedate: 5/25/2009 10:56:00 AM User: CMS
NOTE: THIS PAGE IS NOT TO BE COPIED FOR PROSPECTIVE VENDOR USE.
APPROVED SUPPLIER MATERIAL DESIGNATION
Lubrizol Emkarate RL 220H
Applications:
Carrier screw compressors